Home

Toshiba Satellite S875-S7140

Contents

1. gt gt NOTE The cooling fan location will vary depending on the computer 38 Getting Started Setting up your computer Setting up your computer G TECHNICAL NOTE You must complete all setup steps up to and including Setting up your software on page 42 before adding y external or internal components to your computer These components include but are not limited to a mouse keyboard printer and memory Your computer contains a rechargeable main battery that needs to be charged before you can use it To use external power or to charge the battery you must attach the AC adaptor See Connecting to a power source on page 38 NOTE Please handle your computer carefully to avoid scratching or damaging the surface Connecting to a power source Your computer requires power to operate Use the power cord cable and AC adaptor to connect the computer to a live electrical outlet or to charge the computer s battery AWARNING Never pull on a power cord cable to remove a plug from a socket Always grasp the plug directly Failure to follow this instruction may damage the cord cable and or result in a fire or electric shock possibly resulting in Serious injury AWARNING Always confirm that the power plug and extension cable plug if used has been fully inserted into the socket to ensure a Secure electrical connection Failure to do so may result in a fire or e
2. The user password can be set up under the supervisor password Using a supervisor password A supervisor password prevents other users from changing hardware configuration options Setting a supervisor password CAUTION you choose to set a supervisor or user password TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it TOSHIBA is not responsible for any losses that may occur to you your organization or others as a result of the inability to access your computer To set a supervisor password 1 To access Supervisor Password from the Start screen begin typing Supervisor Password or while in the Desktop screen double click the Desktop Assist icon 2 Click Tools amp Utilities 3 Click Supervisor Password Utilities 1 1 Setting passwords 7 User Password Supervisor Password TOSHNA tus tab lets vou set conckbomns fos Supervisor Pa wend Set Delete Sample Image Supervisor Password tab 4 Click Set 5 Enter your password and then enter it again to verify 6 Click Set NOTE Under User Policy this option may or may not ask for password verification 7 Click OK to save your password as a text file 8 Click Save 9 Click OK Deleting a supervisor password To delete a supervisor password 1 To access Supervisor Password from the Start screen begin typing Supervisor Password or while in the Desktop scre
3. Connect an external monitor see Using external display devices on page 67 Adding memory optional HINT To purchase additional memory modules see the accessories information packaged with your system or visit accessories toshiba com Your computer comes with enough memory to run most of today s popular applications You may want to increase the computer s memory if you use complex software or process large amounts of data NOTE Before adding external devices or memory Toshiba recommends Setting up your software See Setting up your software on page 42 Installing a memory module Memory modules can be installed in the memory module slots on the underside of the computer You will need a small Phillips screwdriver for this procedure A CAUTION f the computer has been running recently the memory module s may be hot The surrounding area may also be hot Allow the module s to cool to room temperature before replacing it Avoid touching the cover the module s and the surrounding area before they have cooled Failure to follow these directions could result in minor bodily injury 46 Getting Started Adding memory optional CAUTION l0 avoid damaging the computers screws use a Phillips screwdriver of the correct size that is in good condition CAUTION Installing a memory module with the computers power on may damage the computer the module or both The comp
4. i Notifications Icons TOSHIBA Leading Innovation gt gt gt emt s w Taskbar Notification area Sample Image Windows Desktop screen Icons An icon represents a folder file or application that can be quickly activated by double clicking the icon You can create a new desktop icon for any folder file or application by dragging the element s icon from its location in a window to the desktop area Exploring Your Computer s Features 1 03 Exploring the desktop You may see various icons displayed on your system desktop for example gt _ Recycle Bin Holds files you have deleted You may be able to mo retrieve these files until you empty the Recycle Bin s TECHNICAL NOTE If you delete a large number of files or very large files from the internal storage drive there may be insufficient space available in the Recycle Bin to hold these files In this case Windows will prompt you to either permanently delete the file s or cancel the deletion f you delete a file of any size from an external media or flash media it does not go into the Recycle Bin The file is permanently deleted s Permanently deleted files cannot be recovered from the Recycle Bin For more information on the Recycle Bin see Windows online Help NOTE If you place the pointer over an icon a popup description of the file contents appears Your desktop may contain other icons depending
5. To ensure that the battery maintains its maximum capacity operate the computer on battery power at least once a month The Lithium Ion battery has no memory effect so it is not necessary to let the battery fully discharge each time However for better accuracy of the battery meter it is helpful to fully discharge the battery periodically Please see Maintaining your battery on page 98 for procedures If the computer is continuously operated on AC power either through an AC adaptor or a port replicator if applicable to your system for an extended period more than a month the battery may fail to retain a charge This may shorten the life of the battery and may cause the battery meter to be inaccurate NOTE For optimum optical media performance it is recommended that you play DVDs while running the computer on AC power For more information about Windows power plans see Power Plans on page 92 The computer also has an internal real time clock RTC battery The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information It maintains this information for up to a month while the computer is turned off 86 Mobile Computing Running the computer on battery power only charge while the computer is turned on 2 4 TECHNICAL NOTE Depending on your system the RTC battery may mie Power management Your computer ships with the power m
6. The TOSHIBA Application Installer window appears 4 Click Next Toshiba Application and Driver Installer TOSHI BA E ppicaions ono your sysien gima TRM poom and rst Aima puio sei an aopioation or a drtwer to install Wey may meee bo uin Dia barean is radial on aoplcalent that ee S a Ber Ba rt operating cored or ade hent that wee not pst of isa dfn pinal Sample Image TOSHIBA Application Installer screen 5 Click the item you want to install Coots a feet ered pre the real bio Werner AMU Deeply Deer E382 7 Aa SS Teh AMD USO Mher Dower AT HIM Buds Cerar Fiala Boah Filter Deve Piece Regts Card Fender Raabak LAM Drws enbai Viene LAM Driver TRG Frema Sound HO Syneotess Pouch Pied Usher TESS Lira ies TOSHIBA Blyeray Des Pryor TOSHIBA Dooce TOS HEA Drakon Aiia Sample Image TOSHIBA Application Installer selection screen 6 Click Install then follow the on screen prompts to complete the installation process Chapter 6 if Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve Others may require help from your network administrator or the manufacturer of the software application This chapter aims to help you solve many problems by yourself It covers the problems you are most likely to encounter If all else fails contact Toshiba You will find information on Toshiba s support services at the end of this chapter
7. The computer is now ready for you to turn it on and begin using it see Exploring Your Computer s Features on page 100 NOTE When opening or closing the display panel place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel CAUTION l0 avoid damaging the display panel do not force it beyond the point where it moves easily and never lift the computer by the display panel Do not press or push on the display panel and be careful to remove any pens or other objects from the keyboard area before closing the display panel Small bright dots may appear on your screen display when you turn on your computer Your display contains an extremely large number of thin film transistors TFT and is manufactured using high precision technology Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology Over a period of time and depending on the usage of the computer the brightness of the screen will deteriorate This is also an intrinsic characteristic of the screen technology When the computer is operated on battery power the screen will dim and you may not be able to increase the brightness of the screen while on battery power 42 Getting Started Registering your computer with Toshiba Initial setup The Windows 8 Startup screen is the first screen displayed when you turn on your co
8. Learning the Basics 15 Using the keyboard 2 Fe AX l at INS HOME END PGDN Fa Se aeie aasa CEE 2 ESC a A amp NUM L OEE LLJ Space i s gt 3 PGON ENTER NOTE To capture a print screen of the entire screen press the Fn PRTSC key This only applies to models with a 10 key keypad To capture only the active window displayed press Fn ALT while simultaneously pressing the PRTSC key 58 Ra fe gt Le lt E m Z m 5 I TH 2N m be 9 gt 2 D fale Lx gt 5 gt E lt B B gt g w 2 Vv z 3 D 7 B m Sample Illustration Keyboard a DEL HOME PGUP PGDN SYSRQ BREAK PAUSE A J X SJ O ACK NUM PACE LUCK i i 7 SF we Me r N Mmr i 7 Sample Illustration PRTSC key on the keyboard NOTE Depending on your model your system may not have a 10 key keypad Function keys The function keys not to be confused with the Fn key are the 12 keys at the top of the keyboard J F3 F4 F5 F7 F10 F1 F12 Sample Illustration Function keys vo F2 F1 F1 through F12 are called function keys because they execute programmed functions when pressed Function keys m
9. functions chip A small piece of silicon containing computer logic and circuits for processing memory input output and or control functions Chips are mounted on printed circuit boards click To press and release the pointing device s primary button without moving the pointing device In the Windows operating system this refers to the pointing device s left button unless otherwise stated See also double click color palette A set of specified colors that establishes the colors that can be displayed on the screen at a particular time compatibility The extent to which computers programs or devices can work together harmoniously using the same commands formats or language as another configuration 1 The collection of components that make up a single computer system 2 How parts of the system are set up that is configured controller A device that controls the transfer of data from a computer to a peripheral device and vice versa For example disk drives monitors keyboards and printers all require controllers 1 68 Glossary CPU See Central Processing Unit CPU CPU cache A section of very fast memory residing between the CPU and the computer s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs See also cache L1 cache L2 cache cursor An on screen symbol usually a flashing vertical line that indicates the position wher
10. If operation is occurring outside of the allowable frequencies as listed above the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network gt Sd The 5 GHz Turbo mode feature is not allowed for operation in any European Community country This device must not be operated in ad hoc mode using channels in the 5 GHz bands in the European Community Ad hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area The presence of nearby radar operation may result in temporary interruption of operation of this device The Access Point s radar detection feature will automatically restart operation on a channel free of radar You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device s are properly configured for European Community operation 13 Bluetooth Wireless Technology Interoperability Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Freq
11. Learning the BaSICS c ccc cscs neeeeeeees 13 COMPUTING tips occ cece see ceeeseseeseneeeenens 73 USING e KEY DOAN G senarai 14 Function K YS c cc ccsecscsecessessseeeesessssseeeeeeesseees 19 Special Windows keys naaier 76 MOUSE properties ereere 16 Starting AN app oc cce secs eseseeseseeeseeeeeenens 11 Starting an app from the Start screen 77 SAVING YOUN WOKK ccc eccecsseecesssesesssseseseesesseeeeesnneens 78 Backing UP YOUP WOFK eccere 18 Using the optical disc drive ccs 18 Optical disc drive components 79 Media control DUttONS eee eeeceeeeeeeeees 80 Inserting an optical CISC ccce 80 Removing a disc with the computer on 8 Playing optical media nes 81 Recording optical media cceeeeeeesseeeeeees 62 Removing a disc with the computer off 82 Toshiba s online resources ereere 83 Chapter 3 Mobile Computing 84 Toshiba s energy Saver GeSIQN ccccccceccessseeeee 84 Running the computer on battery power 64 Batey NOUCO cercespieucgseasceatetensneueteeosocencaseaee 65 Power management eccere 86 Charging the main battery 86 Charging the RIC battery cena 8 Monitoring main battery POWED c ccccceseeeee 88 Determining remaining battery power 89 What to do when the main battery runs low 90 Setting battery notifications ee 90 Conserving battery power uu eee eeeeeeee 91 29 Con
12. Problems that are easy to fix Your application stops responding 128 If you are working with an application that suddenly freezes all operations chances are the application has stopped responding You can exit the failed application without shutting down the operating system or closing other applications To close an application that has stopped responding 1 Press Ctrl Alt and Del simultaneously once The Windows Security Menu appears 2 Click the Task Manager tab If an application has stopped responding the words not responding appear beside its name in the list lf Something Goes Wrong 1 29 Problems when you turn on the computer 3 Select the application you want to close then click End Task Closing the failed application should allow you to continue working If it does not continue with the next step 4 Close the remaining applications one by one by selecting the application name then End Task Closing all applications should allow you to continue working If it does not power off your computer and then restart it Problems when you turn on the computer These problems may occur when you turn on the power The computer will not start Make sure you attached the AC adaptor and power cord cable properly or install a charged battery Press and hold the power button for at least 10 seconds If you are using the AC adaptor check that the wall outlet is working by plugging in another devic
13. The device that reads and writes information and programs on external media or hard disk It rotates the disk at high speed past one or more read write heads document Any file created with an application and if saved to disk given a name by which it can be retrieved See also file double click To press and release the pointing device s primary button rapidly twice without moving the pointing device In the Windows operating system this refers to the pointing device s left button unless otherwise stated download 1 In communications to receive a file from another computer through a modem or network 2 To send font data from the computer to a printer See also upload drag To hold down the mouse button while moving the pointer to drag a selected object In the Windows operating system this refers to the left mouse button unless otherwise stated driver See device driver DVD An individual digital versatile or video disc See also DVD ROM DVD ROM Digital Versatile or Video Disc Read Only Memory A very high capacity storage medium that uses laser optics for reading data Each DVD ROM can hold as much data as several CD ROMs Compare CD ROM emulation A technique in which a device or program imitates another device or program enable To turn on a computer option See also disable eSATA An external device that supports hot swapping and fast data transfer Very useful in storing and tra
14. 77 apps starting from Start screen 77 audio features 106 B backing up files 74 78 battery battery life 85 Call2Recycle 99 care 97 98 changing 94 charge indicator light 40 charge time 86 charger 86 charging 41 86 charging the real time clock RTC 87 conserving power 91 determine remaining power 89 disposal 98 indicator light 89 installation 94 95 low charge 90 maintaining 98 maximum capacity 85 monitoring power 40 88 power management 86 power options 90 real time clock RTC 85 recharge time 85 removing 94 RTC memory 85 1 Index 178 running computer on battery power 84 safety precautions 97 setting notifications 90 taking care of 97 battery indicator light 89 BIOS Setup see System Settings button eject optical disc drive 79 mute button 80 next track button 80 play pause button 80 previous track button 80 volume increase decrease buttons 80 buttons media control buttons 80 C Call2Recycle battery 99 caring for your computer 70 changing battery 94 charging the battery 41 cleaning the computer 71 communications set up 104 computer caring for 70 cleaning 71 environmental precautions 30 99 moving 71 restart 43 running on battery power 84 setting up 38 Sleep mode 44 computer lock 71 computer will not start troubleshooting 129 computing habits troubleshooting 148 computing tips 73 connecting AC adaptor 38 AC adaptor cord to DC IN 40 computer to
15. DS This equipment uses DS SS modulation OF This equipment uses OFDM modulation 3 The interference range of this equipment is less than 40m 4 E BB This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz It is possible to avoid the band of mobile object identification systems 10 The indication shown below appears on this equipment 1 2 3 2 4FH1 CIT 4 2 4 This equipment uses a frequency of 2 4 GHz FH This equipment uses FH SS modulation The interference range of this equipment is less than 10m A U N me This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz 3 TOSHIBA Direct PC Monday Friday 10 00 17 00 Toll Free Tel 0120 15 1048 Direct Dial 03 3457 4850 Fax 03 3457 4868 Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval and it belongs to the device class of radio equipment of low power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan The name of the radio equipment refer to the equipment label provided on the computer Approved by both the JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT and the TELECOM ENGINEERING CENTER The following restrictions apply Do not disassemble or modify the device Do not install the embedded wireless module into other device 5 17 GHz to
16. INFORMATION CONTAINED HEREIN OR THE USE THEREOF 1 Trademarks Satellite Satellite Pro and eco Utility are either registered trademarks or trademarks of Toshiba America Information Systems Inc and or Toshiba Corporation Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Toshiba is under license Other trademarks and trade names are those of their respective owners HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Intel Intel Core Celeron Centrino and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries Microsoft Outlook Windows and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries MultiMediaCard and MMC are registered trademarks of MultiMediaCard Association Secure Digital and SD are trademarks of SD Card Association All other brand and product names are trademarks or registered trademarks of their respective companies Licenses This Product is licensed under the AVC the VC 1 and the MPEG 4 Part 2 Visual patent portfolio licenses for the personal and non commercial use of a consumer to 1 encode v
17. O Sample Image Windows Power Options window 3 Select an appropriate plan for your work environment or create your own custom plan 4 Click Create a power plan in the left pane to set up a new plan Mobile Computing 93 Using the eco power plan NOTE To edit a plan or to edit advanced settings continue to the following steps 5 Click Change plan settings to choose the plan you want to edit This screen allows you to change basic settings 6 Click Change advanced power settings to access settings for battery notification levels internal storage drive power save time etc You can click the plus signs to expand each item and to see what settings are available for each item 7 Click OK to save the plan changes you have performed Depending on your model the power plans available are eco and Balanced or Balanced and Power Saver and are satisfactory for most people and do not need to be edited The eco plan is the best used for maximum battery time The Balanced plan is a compromise between battery time and performance Using the eco power plan This computer may be equipped with the eco power plan Operating the computer with this power plan enabled reduces electrical power consumption by slightly lowering system performance For example when this power plan is enabled the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened To enable or disable the eco power pla
18. Set Status H V System Recovery Media DYD 4 7GB y Information Please insert blank media 3 DVDs Current Media Total Progress iv Verify Create Sample Image TOSHIBA Recovery Media Creator dialog box 2 Select DVD or USB Flash from the drop down list depending on the type of external media you want to use 3 Check the Information area of the dialog box to determine the number of DVDs you will need and or the minimum amount of storage space required for copying your system s recovery files to USB flash drive s 4 Do one of the following If you are copying files to DVD insert a blank DVD into the optical disc drive If you are copying files to a USB flash drive connect a USB flash drive of the required minimum capacity as specified in the TOSHIBA Recovery Media Creator utility to your computer CAUTION All information stored on your DVDs or USB flash drive s will be erased during the process of creating the recovery media Be sure to save the information stored on your external media to another Storage device before executing this procedure or use blank media 5 Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box y Getting Started D Recovering the Internal Storage Drive 6 Follow the on screen prompts to complete the copy process NOTE If you are copying the recovery files to DVDs be sure to label each DVD in
19. Sleep and Charge cannot use 153 USB Wakeup function does not work 153 user password deleting 118 user password setting 118 using a microphone 106 computer lock 71 DVDs 78 eco power plan 93 Memory card reader 108 optical disc drive 78 touch pad 64 Web Camera 107 using the keyboard 74 Utilities 110 V video projector adjusting display 70 W warranty standard limited warranty 29 Web Camera using 107 Web sites 154 Wi Fi wireless networking 105 Windows Charms 101 Devices 101 Search 101 Settings 101 Share 101 Start 101 Windows key 76 Windows operating system desktop 102 109 troubleshooting 131 Windows Store 104 wireless networking 105 troubleshooting 145
20. Sleep command system indicator lights Una o Ud Um AC power light Battery light ON OFF light Wireless indicator light Sample Illustration Power and battery light locations Determining remaining battery power NOTE Wait a few moments after turning on the computer before trying to monitor the remaining battery power The computer needs this time to check the battery s remaining capacity and perform its calculations vil Move the pointer over the power icon in the notification area see Finding your way around the desktop on page 102 for more information on the notification area A pop up message displays the remaining battery power as a percentage With repeated discharges and recharges the battery s capacity gradually decreases A frequently used older battery does not power the computer for as long as a new battery even when both are fully charged O Mobile Computing Monitoring main battery power TECHNICAL NOTE The computer drains the battery faster at low temperatures Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery What to do when the main battery runs low When the main battery runs low you can Plug the computer into an external power source
21. Utility PC Health Monitor Recovery Media Creator 110 Utiliti Desktop yee Service Station TOSHIBA Application Installer Desktop Assist The Desktop Assist provides quick access to computer functions and allows you to customize a range of computer settings To access Desktop Assist from the Start screen begin typing Desktop Assist or while in the Desktop screen double click the Desktop Assist icon The Desktop Assist window appears TOSHIBA x VIDED PLAYER Desktop Assist a Media amp Entertainment Titel Ae Uhia Supp Er Aecovey All Programs Favorite Links computer hive Documemis Conio Panes Sample Image Desktop Assist window The Desktop Assist offers several options Media amp Entertainment Tools amp Utilities Support amp Recovery 1 1 2 Utilities Desktop Assist Media amp Entertainment The feature available in this category is TOSHIBA Video Player X TOSHIBA TOSHIBA VIDEO PLAYER Desktop Assist e Media amp Ernbertaimnmeni Tes Ay Utii upp A Recovery All Programs Fawonte Links camputer biy Documenis contol Panel Sample Image Desktop Assist window Media amp Entertainment tab Utiliti Desktop ree 1 1 3 Tools amp Utilities The features that may be available in this category are Supervisor password System Settings Function Key User password TOSHIBA E D Boo
22. Utility Hino Supervisor Protection Password G e D Media amp Entertainment 3 Tos amp Utilities User Pasia Cuppa amp Aecoweny AN Programs aul Favorite Links My Documents Conii Panel X System Findon key E Sample Image Desktop Assist window Tools amp Utilities tab 1 1 4 Utilities Desktop Assist Support amp Recovery The features that may be available in this category are PC Diagnostic Tool Utility PC Health Monitor Recovery Media Creator Service Station TOSHIBA Application Installer amp User s Guide TOSHIBA x D PC Diagnostic PC Health Recovery Service Station Toshiba Tool Monitor Media Creator Application Installer E AE B e v Media amp Entertainment I Y ake Tools amp Utilities User s Guide Support amp Recovery All Programs amp Favorite Links Computer My Documents Control Panel Sample Image Desktop Assist window Support amp Recovery tab Utilities 1 1 D eco Utility eco Utility The eco Utility monitors your power savings from using the eco power plan by tracking real time power consumption and accumulated savings over time To access the eco Utility do one of the following 1 To access eco Utility from the Start screen begin typing eco Utility or while in the Desktop screen double click the Desktop Assist icon 2 Click Tools amp Utilities 3 Click eco Utility The eco Utility w
23. brightness of the screen will deteriorate This is also an intrinsic characteristic of the screen technology When the computer is operated on battery power the screen will dim and you may not be able to increase the brightness of the screen while on battery power lf Something Goes Wrong 1 4 Disk or storage drive problems Disk or storage drive problems Problems with the storage drive or with external media usually show up as an inability to access the drive or as sector errors Sometimes a drive problem may cause one or more files to appear to have garbage in them Typical problems are You are having trouble accessing a drive or one or more files appear to be missing Make sure you are identifying the drive by its correct name A or C Error checking NOTE This feature is not available for optical disc drives Run Error checking which analyzes the directories and files on the storage drive and repairs any damage it finds To run Error checking 1 From the Start screen type computer 2 Click Computer from the list that appears A Q D S Results for computer Computer Management Sample Image Search results for computer 1 42 lf Something Goes Wrong Disk or storage drive problems 3 Right click the drive you wish to check iownloads Homegroup y Network Sample Image Clicking on the drive 4 Inthe pop up menu click Properties The drive s Properties box appe
24. computer s internal storage drive The collected information includes device operation time and number of actuations or status changes e g number of power button and Fn key combination uses and AC adaptor battery LCD fan HDD sound volume wireless communication switch docking and USB information date of initial system use and also computer and device usage e g power settings battery temperature and recharging CPU memory and temperatures for various devices The collected information is not limited to the examples specified here The stored data uses a very small portion of the total hard disk capacity approximately 3 MB or less per year This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA s authorized service providers Additionally TOSHIBA may use this information for quality assurance analysis Subject to the use restrictions above the data logged on the internal storage drive may be transferred to entities located outside of your country or region of residence e g European Union Those countries may or may not have the same data protection laws or data protection levels as required by your home country or region You may disable the PC Health Monitor at any time by uninstalling the software via the Windows Control Pane
25. display device Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen To do this 1 Read the directions that came with the monitor to see if you first need to install new software C 2 Connect the monitor s video cable to the RGB monitor port on the side of the computer 3 Connect the device s power cable to a live electrical outlet 4 Turn on the external device Your computer will automatically detect the external display device NOTE You can change the display settings by pressing the am P keys or by configuring the display properties settings Getting Started 69 Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device you can choose to use the internal display only the external device only or both simultaneously NOTE Some modes are only available with the appropriate device attached and turned on The quickest way to change the display output settings is to use the am P keys Press the 8 P keys repeatedly until the setting you want takes effect Briefly pause each time you press the g8 P keys to allow time for the display to change This cycles through the settings in the following order the last two options are available if an external monitor is connected PC screen only Duplicate Exten
26. electromagnetic energy emitted by wireless devices like for example mobile phones Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless LAN is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include Using the Wireless LAN equipment on board airplanes or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment 6 CAUTION Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits Nevertheless the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation
27. for your computer s main memory See also memory Compare ROM Random Access Memory See RAM Read Only Memory See ROM reboot See boot restart removable disk A disk that can be removed from a disk drive A Flash drive is one example of a removable disk Glossary 1 15 resolution A measure of the sharpness of the images that can be produced by a printer or displayed on a screen For a printer resolution is expressed in dots per inch dpi For a screen it is expressed as the number of pixels available horizontally and vertically restart Synonymous with reboot To reset the computer by reloading the operating system without turning the computer off See also boot RGB Red Green Blue monitor A monitor that reproduces all colors by mixing red green and blue light in various combinations RJ45 connector An eight wire connector used to connect a computer to a network ROM Read Only Memory Non volatile memory that can be read but not written to Non volatile here means that information in ROM remains whether or not the computer is receiving power This type of memory is used to store your computer s BIOS which is essential instructions the computer reads when you start it up See also BIOS memory Compare RAM Secure Digital SD A small portable non volatile memory card used to store and transfer data between digital products providing encryption capability for content security select T
28. has made every effort at the time of publication to ensure the accuracy of the information provided herein product specifications configurations prices system component options availability are all subject to change without notice For the most up to date product information about your computer or to stay current with the various computer software or hardware options visit Toshibas Web site at support toshiba com This guide introduces the computer s features as well as some basic procedures needed to perform tasks in Windows 8 You can Read the entire guide from beginning to end Skim through and stop when a topic interests you Use the table of contents and the index to find specific information 20 Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data These safety cautions have been classified according to the seriousness of the risk and icons highlight these instructions as follows Indicates an imminently hazardous situation which if not avoided will result in death or serious injury AWARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or m
29. in speakers headphones or external speakers Recording sounds You may record sounds using the computer s internal microphone available on certain models or by connecting an optional external microphone Using a microphone 1 If you want to use an external microphone connect it to the computer 2 From the Start screen begin typing Sound Recorder and click your selection or if you are in the Desktop move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search fg Charm and in the Search field type Sound Recorder x Start Recording 0 00 00 Start Recording Stop Recording button Sample Image Sound Recorder screen 3 Click the Start Recording button 4 Speak normally into the microphone 5 When you have finished recording click the Stop Recording button The Save As dialog box appears 6 To save the file type a file name and then click Save Exploring Your Computer s Features 1 0 Using the Web Camera Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers Instead of using the internal speakers you can connect headphones or a pair of external stereo speakers A CAUTION Before putting on headphones to listen turn the volume down Do not set the volume too high when using headphones Continuous exposure to loud sound can harm your hearing TECHNICAL N
30. in the notification area and then selecting the Safely Remove Hardware and Eject Media icon Highlight and then click the item you would like to eject If the system is unable to prepare the media for safe removal a message will tell you to try again later If the media can be removed now the system displays Safe to Remove Hardware If the computer has a spring loaded adapter slot see step 4 otherwise skip to step 5 Gently press the card inward to release it The card pops out slightly Grasp the card and pull it straight out Sample Illustration Removing memory media CAUTION Do not remove memory media while data is being written or read Even when the Windows message copying disappears writing to the media might still be in progress and your data could be destroyed Chapter 5 Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs Together these allow you to ascertain certain system details set additional options or change default options These utilities are described in this chapter NOTE The utilities described in this chapter and the icons shown in the Sample images are applicable only if the related utility is available on your system Desktop Assist eco Utility Supervisor password User password System Settings Sleep and Charge Function Key PC Diagnostic Tool
31. is lost or damaged Basic Input Output System BIOS See BIOS baud rate The speed at which a communication device such as a printer or modem transmits information Baud rate is the number of signal changes per second not necessarily the same as bits per second See also bits per second Blu ray Disc BD Offering more storage capacity than DVDs the format was developed to allow for more data storage and to enable recording and playback of high definition video HD BIOS Basic Input Output System Basic instructions stored in read only memory ROM containing the information the computer needs to check hardware and load the operating system when you start up the computer bits per second bps A way of measuring the speed at which information is passed between two devices This is the basic unit of measure used in modem communications and is similar but not identical to the baud rate See also baud rate boot To start the computer The term boot originates from bootstrap program as in pulling itself up by its bootstraps a program that loads and initializes the operating system See also reboot boot disk See system disk boot priority startup sequence The order in which the computer accesses its internal storage drives to locate the startup files Under the default startup sequence the computer looks for the startup files in the external media before checking the internal storage drive
32. light 89 online resources Toshiba 83 optical disc Auto Run feature 81 handling 80 inserting 80 playing optical media 81 positioning 80 recording optical media 82 removing with computer off 82 removing with computer on 81 optical disc drive components 79 drive in use indicator light 79 eject button 79 handling an optical disc 80 inserting an optical disc 80 manual eject hole 79 playing optical media 81 recording optical media 82 removing a disc 81 82 troubleshooting 143 using 78 79 optical discs troubleshooting 144 optical media recording 82 optional external devices adding 45 other documentation 29 P password deleting a supervisor 117 deleting a user 118 instant password 116 Index 181 power on password 116 setting 116 setting a supervisor 116 setting a user 118 supervisor password 116 user password 116 PC Diagnostic Tool Utility 124 PC Health Monitor 125 port HDMI 67 RGB 68 power connecting cable to AC adaptor 39 cord cable 40 cord cable connectors 162 energy saving features 84 power management 86 optimum performance 86 power plans selecting power plan options 92 power saving options 91 precautions safety 35 printer troubleshooting 144 problem solving contacting Toshiba 154 Startup options 132 projector connecting 68 R real time clock RTC battery 85 recording sounds 106 recovery creating recovery media 55 installing drivers and applications 63 internal storage drive 54 refresh
33. on your configuration Refer to the Windows online Help for more specific information on each icon and how to use it or see Help file on page 157 Taskbar Each time you open a application a button associated with that application appears on the taskbar With some applications a button appears on the taskbar for each document or window you open You can use these buttons to quickly switch between the applications or windows To make a application or window the currently active one click the associated taskbar button Notification area The notification area displays icons of tasks or applications that run continuously in the background and displays notifications To learn more about each task position the pointer over the icon for a few moments and a short description of the task appears 1 0 4 Exploring Your Computer s Features Windows Store Typical tasks in the notification area are Current time Power usage mode network connectivity status and speaker volume To activate a specific task click the appropriate notification area icon Notifications There are many types of notifications you can employ to help you with the many tasks you perform every day User experience notifications can be set for toast tile badge and raw notifications Toast notifications Designed for time sensitive delivery of personalized content such as an instant message from a friend Tile notifications Used by applica
34. operating system has started properly but you still have a problem using your computer the online Help can assist you in troubleshooting the problem Getting to the online Help will differ depending on which interface you are in Start screen Type Help and Support NOTE As soon as you begin typing the search feature automatically begins Desktop Press the F1 key When the Windows Help and Support screen appears do one or both of the following In the open search field type the topic you need help with and follow the on screen instructions Click one of the options listed in the window and follow the instructions You can connect to Support Online by going to Toshiba support at support toshiba com Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device CAUTION Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them Checking device properties Device Manager provides a way to view the properties of a device Properties include the name of the manufacturer the type of device the drivers installed and the system resources assigned to the device To check a device s properties 1 From the Start screen type Device The sear
35. or shutdown state powered off This function can only be used for the port that supports the USB Sleep and Charge function hereinafter called compatible port Compatible ports are USB ports that have the 4 symbol icon You can use the USB Sleep and Charge function to charge certain USB compatible external devices such as mobile phones or portable digital music players However the USB Sleep and Charge function may not work with certain external devices even if they are compliant with the USB specification In those cases power on the computer to charge the device Utilities 1 21 Sleep and Charge NOTE s When USB Sleep and Charge function is set to Enabled USB bus power DC 5V will be supplied to the compatible port even when the power of the computer is turned OFF USB bus power DC 5V is similarly supplied to the external devices which are connected to the compatible ports However some external devices cannot be charged solely by supplying USB bus power DC 5V As for the specifications of the external devices please contact the device manufacturer or check the specifications of the external devices thoroughly before use s f USB Sleep and Charge is enabled the computer s battery will discharge during hibernation or when the computer is turned off It is recommended that you connect the AC adaptor to the computer when enabling the USB Sleep and Charge function Using the USB Sl
36. resolution 161 zooming in 161 zooming out 161 function keys 75 H headphones using 107 icon desktop 102 moving to desktop 102 recycle bin 103 safety 28 Shut down 43 44 46 136 Initial setup using your computer for the first time 42 installation memory module 45 installing a charged battery 95 battery 94 memory modules 45 internal storage drive recovery 54 K keyboard function keys 75 special Windows keys 76 troubleshooting 138 using 74 keys function keys 75 L LEDs system indicator lights 89 AC adaptor light 88 AC power light 38 40 battery light 40 41 Web Camera light 107 Index 180 Licenses 17 lock computer using 71 maintaining your battery 98 manual eject hole optical disc drive 79 media control buttons mute button 80 next track button 80 play pause button 80 previous track button 80 using 80 volume increase decrease buttons 80 memory adding optional 45 check total memory 53 removing memory module slot cover 47 Memory card reader inserting memory media 108 removing memory media 109 using 108 memory module installation 45 inserting into socket 49 removing 51 52 microphone using 106 monitor connecting 68 monitor problems troubleshooting 139 monitoring battery power 88 mouse properties 76 moving the computer 71 network accessing 105 connecting your computer 105 networking wireless 105 notification area 103 notifications 104 0 ON OFF indicator
37. savings and peak system performance You may also set individual power saving options to suit your own needs The following sections describe how to choose a Power Plan and discuss each power saving option Power Plans You can choose a predefined Power Plan or select your own combination of power options To do this 1 While on the desktop click the battery icon in the notification area 2 Click More power options The Windows Power Options window appears f Ei Cerne Pang Harem eaj boua gt Poeg Opn Distal Parel Here Chae GF Cuore Ji erat plan Baquire spared on walkeup A poe ple qa cedecben ef harene aed nates sebas bie dupl beghiness cheep ete het manges hoes yir computer uhii parir lgl rre rre heat vhi t preti butter Plans shown om the battery mater Balan cd ct omia Change plan penting Subomaterslhy balances peficomance wath energy coniuempion om capable hardware Ghose vhat g kotru Ghee ld da Dihitt a power ples Gia Checcse when to fun ot the bid Change piki pettonge aeuply HVE energy ung tha sething mecommanded by TOHARA i Oharge when thet computer dep bide echt peal plezi a H TORINA 4 Ath i E Ser ca Witty high partoomance Change plan petterege E Pace Open Power On Fewer perionrarece DUT pray ue ME Energy Power net Change plan petings Senet eeetigy by edeo pour compubers perlonnance where pribit Pereonalguben Wiirde Mebiity Catei Upar Ar courie irin bignan
38. the underside of the computer Always operate your computer on a hard flat surface Using your computer on a carpet or other soft material can block the vents located at the underside of the computer Overheating your computer or AC adaptor could cause system failure computer or AC adaptor damage or a fire possibly resulting in Serious injury gt gt 7 Reconnect the cables 8 Restart the computer TECHNICAL NOTE You must have at least one memory module installed for the computer to work Upon restarting your computer touch any key to return to the login in screen Checking total memory When you add or remove a memory module you can check that the computer has recognized the change To do this Press the 88 X keys and then click System The System window appears Installed memory RAM is displayed below the System heading If the computer does not recognize the memory configuration turn off the computer and remove the memory module slot cover complete steps 1 10 in Installing a memory module on page 45 and then check that the module is inserted completely into the socket and lined up squarely with the socket latches D 4 Getting Started Recovering the Internal Storage Drive NOTE From time to time Windows will display a pop up that says Do you want to allow the following program to make changes to this computer This is a security feature to prevent pro
39. the mouse or trackball with a loose relaxed hand Do you use a light touch when typing or using the mouse Do you clean your mouse or trackball regularly Is the top of your monitor close to eye level Is the monitor about an arm length away Have you eliminated the glare on the monitor Is the monitor tilted so that it is easy to read CECO C O L L L Do you change postures regularly Li Do you take breaks at least once an hour Precautions Your computer is designed to provide optimum safety and ease of use and to withstand the rigors of travel You should observe certain precautions to further reduce the risk of personal injury or damage to the computer Avoid prolonged physical contact with the underside or surface of the computer 36 Getting Started Selecting a place to work AWARNING Never allow any liquids to spill into any part of your computer and never expose the computer to rain water seawater or moisture Exposure to liquid or moisture can cause electric shock or fire resulting in damage or serious injury If any of these eventualities should accidentally occur immediately 1 Turn off the computer 2 Disconnect the AC adaptor from the power plug socket and computer 3 Remove the battery pack Failure to follow these instructions could result in serious injury or permanent damage to the computer Do not turn on the power again until you have taken the computer to an au
40. using Device Manager to view the optical disc drive properties 7 Check the Toshiba Web site for new information on optical disc drives and their operation A blank screen appears while watching a DVD ROM movie or title Change the setting for when to turn off the display using the following steps 1 Move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search F Charm click Settings and in the Search field type Power 1 48 lf Something Goes Wrong Develop good computing habits From the search list click Choose when to turn off display To keep the display from turning off click Never in both drop down lists 4 Click Save changes The screen saver runs while you are watching a movie or title If the screen saver is enabled it runs on top of any movie or title you are watching To disable the screen saver 1 Right click the desktop and click Personalize in the menu 2 Click Screen Saver in the lower right corner of the window 3 Select None from the Screen saver drop down list 4 Click OK Develop good computing habits Save your work frequently You can never predict when your computer will lock forcing you to close an application and lose unsaved changes Many software applications build in an automatic backup but you should not rely solely on this feature Save your work See Computing tips on page 73 for instructions On a regular basis
41. your PC 58 reset your PC 60 restoring from recovery media 57 Recovery Media Creator 126 recycle bin icon 103 refresh your PC with user s data 58 registering computer 42 removing an optical disc with computer on 81 and optical disc with computer off 82 battery from the computer 94 memory module 51 memory module slot cover 47 restart computer 43 restore points troubleshooting 149 running computer on battery power 84 S safety computer 99 disposing of batteries 98 icons 28 precautions 35 safety precautions battery 97 saving files 78 selecting a place to work 30 power plan options 92 video cables 68 Service Station 126 setting low battery notifications 90 setting up AC adaptor 38 adding memory optional 45 communications 104 computer 38 1 82 Index software 42 work environment 30 settings customize computer settings 70 display output 69 Shut down computer 43 44 46 136 icon 43 44 46 136 shut down computer 43 Sleep and Charge 120 Sleep mode computer 44 sounds recording 106 speakers using external 107 Start screen exploring the 100 starting an app 77 starting an app from Start screen 77 Startup menu problem solving 132 supervisor password deleting 117 supervisor password set up 116 system indicator lights AC power 38 drive in use indicator 79 LEDs 40 41 88 89 107 System Settings 119 T taking care of battery 97 taskbar 103 television adjusting display 70 Tiles Start screen 102
42. your computer is turned off 2 Doone of the following If your recovery files are on DVDs insert the first recovery DVD into your optical disc drive If your recovery files are on a USB flash drive connect the USB flash drive to your computer 58 Getting Started Recovering the Internal Storage Drive 3 Press and hold the F12 key immediately after pressing the power button The Boot menu displays 4 Using the arrow keys select the DVD option or the USB Flash option depending on which type of media you are using and then press the ENTER key 5 A warning screen appears stating that when the recovery is executed all data on your internal storage drive will be deleted and rewritten Click Yes to continue 6 Follow the on screen instructions to complete the recovery process When the process is complete a message displays indicating that the drive has been recovered 7 Click Finish to restart the computer Refresh your PC with user s data CAUTION Using Refresh your PC recovers your internal storage drive to factory default state and attempts to save your data Toshiba does not guarantee successful data back up Please make a complete back up of your data to external media before executing the recovery For more information see Backing up your work on page 78 NOTE During the recovery process your computer must be connected to an external power source via the AC adaptor You can r
43. 1 Error checking 0ccccccceccessssssseseesseessseeeneeess 141 Optical disc drive problems 143 Sound system problems ou eee essere eeeeeees 144 Printer problems cc cc cecceeseescessseesessseeeeeeseeees 144 Wireless networking probleMS cccceeeeee 145 DVD operating problems cceeeeeeeeeeeseees 147 2 4 Contents Develop good computing habits 0 0 148 Data and system configuration backup in the Windows operating system 149 If you need further assistance 154 Contacting Toshiba wu cece eeeeeeeeees 154 Other Toshiba Internet Web sites 154 Toshiba s worldwide offices 155 Appendix A TOSHIBA Function KeyS c cceeeeeees 156 FUN HONS orrera EEEE 156 eID TO eese E 157 Display brightness ccccessseeeeesesteeeeeens 157 Output Display switch o 158 Disabling or enabling the touch pad 159 Media DUttONS oo eee eeeeceesseeeeeeesseeeeeens 159 Volume Mute ccecce 160 Disabling or enabling wireless devices 160 Keyboard FUNCTION keys eneen 161 Zoom Display resolution ceeeeeeeeees 161 Appendix B Power Cord Cable Connectors 162 GIOSSANY ssoeeisseeeeeseeeesneeeesnsrreessrriennnrenrnrirnnnreeesnnrnnnrrnesnrrneas 163 Introduction ibe Welcome to the world of powerful portable multimedia computing With your Toshiba computer your work and entertainment can accompany you wherever you go Your comp
44. 5 23 GHz for indoor use only Europe Restrictions for use of 2 4 GHz Frequencies in European Community Countries For private usage outside buildings across public grounds over less than 300m no special registration with IBPT BIPT is required Registration to IBPT BIPT is required for private usage outside buildings across public grounds over more than 300m For registration and license please contact IBPT BIPT Voor priv gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT IBPT nodig voor gebruik over afstand groter dan 300m is wel registratie bij BIPT IBPT nodig Voor registratie of licentie kunt u contact opnemen met BIPT Dans le cas d une utilisation priv e l ext rieur d un b timent au dessus d un espace public aucun enregistrement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure 300m un enregistrement aupr s de l IBPT est requise Pour les enregistrements et licences veuillez contacter l IBPT Deutschland License required for outdoor installations Check with reseller for procedure to follow Anmeldung im Outdoor Bereich notwendig aber nicht genehmigungspflichtig Bitte mit H ndler die Vorgehensweise abstimmen France Restricted frequency band only channels 1 to 7 2400 MHz and 2454 MHz respectively may be used outdoors in France Please contact A R T http www art telecom fr for applicable procedures t
45. ES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION YOU AND NOT TOSHIBA ASSUME FULL RESPONSIBILITY FOR SUCH USE FCC Notice Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE Only Peripherals complying with the FCC Class B limits may be attache
46. Fully clean the drive option may take several hours Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer To reinstall drivers and applications 1 From the Start screen begin typing TOSHIBA Application Installer and click your selection or if you are in the Desktop move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search F Charm and in the Search field type TOSHIBA Application Installer In the list that above click your selection Search field Apps ty Settings hi Files Internet Explorer Store Sample Image Installing drivers and applications 2 Click Next Click the item you want to install Click Install Follow the on screen prompts to complete the installation process n A U 64 Getting Started Using the touch pad Using the touch pad NOTE some of the touch pad operations described in this section are only supported in certain applications and only on certain models You can use the touch pad the small touch sensitive area in front of the keyboard and the adjacent control buttons to Move the pointer on the screen Select an item on the screen Open or activate an item on the screen Scroll through a document or information Zoom in for a close up view amp Zoom out to see mo
47. OTE When using amplified speakers use speakers that require an external power source Other types of speakers will be inadequate to produce sound from the computer To play back sound files through external speakers or headphones 1 Locate the headphone jack on the computer 2 Using any necessary adapters plug the cable from the headphones or external speakers into the headphone jack The headphone jack requires a 16 ohm stereo mini connector To adjust the volume For external speakers use the volume controls on each speaker o For headphones use the computer s volume control Using the Web Camera Available on certain models Your computer may come with a built in Web Camera With this Web Camera you can do the following Take pictures and record videos with your computer Chat with others and have them see you while using instant messaging IM applications lt Have video conference calls NOTE To email instant message or video conference you must be connected to the Internet Depending on your computer model the process of sending email taking pictures or recording video messages may vary 1 08 Exploring Your Computer s Features Using the Memory card reader To access the Web Camera on the Start screen click the Camera tile The Web Camera indicator light glows when the Web Camera is active Using the Memory card reader Available on certain models The Memory ca
48. Start screen move your pointer over the appropriate tile and click to open To Start an app from the Desktop move your pointer over the upper or lower right corner of the screen When the Windows Charms slide out from the right click the Start ff Charm Starting an app from the Start screen To Start an app on the Start screen move your pointer over the appropriate tile and click to open To Start an app using the Search function move your pointer over the upper or lower right corner of the screen When the Windows Charms slide out from the right click the Search fg Charm The apps screen appears with the available system apps to choose from or you can enter your search in the search field Below is an example using the Search field to start an app 1 Move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search F Charm E 7 Tal g a a Sample Image Searching for apps 2 Start typing the app s name in the Search field As you type all matching files and apps are displayed 3 Click the app you wish to open 18 Learning the Basics Saving your work Saving your work Before you turn off the computer using the Shut down command save your work on the internal storage drive external media flash media or optical disc This is one of the most important rules of computing Many applications offer a feature that saves documents at r
49. TOSHIBA Leading Innovation gt gt gt Satellite Satellite Pro C800 L800 S800 Series Users Guide If you need assistance Technical support is available online at Toshiba s Web site at support toshiba com At this Web site you will find answers for many commonly asked technical questions plus many downloadable software drivers BIOS updates and other downloads For more information see If Something Goes Wrong on page 128 in this guide GMAD00329012 12 12 2 AWARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling For the state of California only Model Satellite Satellite Pro C800 L800 S800 Series Recordable and or ReWritable Drive s and Associated Software Warranty The computer system you purchased may include Recordable and or ReWritable optical disc drive s and associated software among the most advanced data storage technologies available As with any new technology you must read and follow all set up and usage instructions in the applicable user guides and or manuals enclosed or provided electronically If you fail to do so this product may not function properly and you may lose data or suffer other damage TOSHIBA AMERICA INFORMATION SYSTEMS INC TOSHIBA ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERR
50. The PC settings window appears PC settings Available storage Yow Neve 660 CA pemtatie Soe fore Mun pr your apn are wu hoary Personalize Refresh your PC without affecting your files U F your PE nnt puweng wel you caa refresh E whaa oer your preteen muse sers Heo ad omes peronai fes Notifications Sannt Search Remove everything and reinstall Windows Share F yOu ward recptie pour PC or shart Gwar Coergietety pow Cert ieiet A to Ba tory serg uoan Privacy Adva Devices Start up fom a deor oF dac buch ata USE ave or CVUL change your PO tass vetting Change Windows irto setting o nnie Windos from s iyiler mage Mua mi retat poor PC Wireless EE Ease of Access Cians urur cottinerc Sample Image PC settings screen 4 Click General 5 Scroll down to Remove everything and reinstall Windows and click Get Started The Reset your PC screen appears Sample Image Reset your PC screen Recovering the Internal Storage Drive Click the Next button The Do you want to fully clean your drive screen appears Select one of the following options Just remove my files Fully clean the drive The Ready to reset your PC screen appears Click the Reset button The Resetting your PC window appears When the process is complete your system will reboot your Windows operating system Getting Started 63 Recovering the Internal Storage Drive NOTE selecting the
51. UPTED OR ERROR FREE YOU AGREE THAT TOSHIBA ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS PROFITS PROGRAMS DATA NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT EVEN IF ADVISED OF THE POSSIBILITY THEREOF Protection of Stored Data For your important data please make periodic back up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures alteration or loss of the data IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA OR ANY OTHER DAMAGE RESULTING THEREFROM WHEN COPYING OR TRANSFERRING YOUR DATA PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY Critical Applications The computer you have purchased is not designed for any critical applications Critical applications means life support systems medical applications connections to implanted medical devices commercial transportation nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage ACCORDINGLY TOSHIBA ITS AFFILIAT
52. You may be inadvertently brushing the touch pad with the heel of your hand as you type Also accidental light touches or taps on the touch pad may select an item or text on the screen and potentially the item or text may be replaced by the next character you type Temporarily disable the touch pad so that it does not respond to touch or button presses while you type See Disabling or enabling the touch pad on page 67 Adjust the sensitivity of the touch pad so that it is less responsive to accidental light taps and lighter finger pressure NOTE Touch pad setting options vary by computer model The touch pad settings are accessible through the Mouse Properties option of the Windows Control Panel For more information please visit support toshiba com Getting Started 6 Using external display devices Disabling or enabling the touch pad The touch pad is enabled by default To enable disable the touch pad press F5 For more information see Disabling or enabling the touch pad on page 159 Connecting an external device NOTE Depending on your system some models may include USB 3 0 port s To distinguish these ports please look for the blue inset within the USB 3 0 port if available You can easily attach an external device your computer To do this 1 Read the directions that came with the device to see if you first need to install new software 2 Connect the device s video or USB cable to
53. a network 105 external device 67 HDMI compatible TV or display device 68 monitor 68 power cord cable 40 power source 39 cooling fan adequate ventilation 37 customize computer settings 70 D data entire system backup troubleshooting 151 desktop creating new icon 102 exploring the 102 icons 102 recycle bin 103 standard features 101 102 Desktop Assist 111 Media amp Entertainment tab 112 Support amp Recovery tab 114 Tools amp Utilities tab 113 Device Manager fixing a problem 135 directing display output 69 disabling touch pad 67 display troubleshooting 140 display devices external 67 display output settings 69 display external Index 1 19 adjusting 70 disposal information 18 disposing of used batteries 98 DVD removing with computer off 82 removing with computer on 81 DVD player troubleshooting 147 DVDs using 78 E eco power plan 93 eco Utility 115 eject button optical disc drive 79 eject optical disc drive 79 enabling touch pad 67 enabling disabling touch pad 159 ENERGY STAR 25 exploring desktop 102 Start screen 100 external display device HDMI Out port 67 RGB monitor port 68 external display adjusting 70 F files backing up 74 78 saving 78 Function Key 123 Function keys 159 disabling or enabling wireless devices 160 display brightness 157 Help file 157 keyboard Function keys 161 media buttons 159 Output Display switch 158 volume mute 160 Zoom Display
54. ak off inside the computer and damage it 80 Learning the Basics Using the optical disc drive Media control buttons The media control buttons located above the keyboard allow you mute the sound and play audio CDs or DVD movies when the computer is on Volume decrease button Play pause button Next track button Previous track Mute button GEIS GEC Sample Illustration Media control buttons Volume increase button The Previous track button allows you to return to the preceding track on the disc The Play pause button allows you to start playing the disc or pause it if currently playing The Next track button allows you to skip to the following track on the disc The Volume decrease button allows you to decrease the volume of the sound coming from the computer The Volume increase button allows you to increase the volume of the sound coming from the computer The Mute button allows you to mute the sound Inserting an optical disc To insert an optical disc into the drive 1 Make sure the computer is turned on 2 Make sure the drive s in use indicator light is off 3 Press the drive s eject button 4 Hold the disc by its edges and check that it is free of dust If the disc is dusty clean it 5 Place the disc carefully in the disc tray label side up and gently press the disc onto the center spindle until it clicks into place CAUTION Handle DVDs and CDs carefully making contact onl
55. al details please visit us toshiba com recycle Contents Introduction occ ccecscecscessscstescssessscessscssscssetseessssssenseneneeneee 20 This guide ceecee 21 Safety COnS aca scateracomateranasoseaueaonacincectesnautedncaseeceascann 28 Other iCONS used 28 Your computer s features and specifications 29 Other documentation cece eceeeeeeeseeeeereeen 29 Service OPTIONS ooo eee ececseecesseecesseeeseseeesesteeeeeeeeens 29 Chapter 1 Getting Started ccsesescesssssssseeseeeeees 30 Selecting a place tO WOFK nccc 30 setting up a work environment 30 Keeping yourself comfortable ssc 31 Computer user comfort recommendations 31 Good Working Posture nescis 31 Using the notebook with an external keyboard mouse or monitor 32 TY DING SIO recisi E 33 Taking breaks and varying tasks ccceee 33 Mobile computing tips scc 34 Transporting the notebooK eeeeees 34 seeking additional help n c 34 20 Contents GCC WSU a A 35 PrecaUN ONS cncdecuaetteecutast iaun 35 Important information on your computer s C COMI TAM cesee tec est sactemetteaseeentecccansceceana stan 3 Setting UP your COMPUTED ceee 38 Connecting to a power SOUICE eseese 38 Charging the main battery 41 Using the computer for the first time 08 4 Initial setup aiessctscisiciencroacemisctveieiuswncuslenantentecstonta 42 Setting Up your SO WAre en 42 Registering your computer with Toshiba 42 To Shut down your c
56. an Directives The party responsible for CE Marking is TOSHIBA Europe GmbH Hammfelddamm 8 41460 Neuss Germany Supplementary The product complies with the Information requirements of the Low Voltage Directive 73 23 EEC the EMC Directive 89 336 EEC and or the R amp TTE Directive 1999 5 EC The European Union WEEE Waste from Electrical and Electronic Equipment Directive Information The European Union WEEE Waste from Electrical and Electronic Equipment Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse This Directive requires producers of electrical and electronic products put on the market in European Union EU member countries after August 2005 to mark such products with a crossed out wheeled bin with a black bar symbol If the product s battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled bin symbol on the battery Pb Hg Cd Se In the European Union these symbols indicate that when the last end user wishes to discard this product it must be sent to appropriate facilities for recovery and recycling This Directive applies to EU member countrie
57. anagement options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes CAUTION Changes to these settings may result in system performance or Stability issues Users who are not completely familiar with the power management component of the system should use the preset configuration For assistance with setup changes contact Toshiba s Customer Support Center Charging the main battery The battery needs to be charged before you can use it to power the computer To charge the main battery while it is in your computer plug the computer into a live electrical outlet The battery charges whether the computer is on or off TECHNICAL NOTE The recharging of the battery may not occur when your computer is using all of the power provided by the AC adaptor to run applications features and devices Your computer s Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge The battery may not start charging immediately under the following conditions gt The battery is extremely hot or cold To ensure that the battery charges to its full capacity wait until it reaches room temperature 50 to 80 degrees Fahrenheit 10 to 26 degrees Celsius Mobile Computing 8 Running the computer on battery power The battery
58. and recharge the main battery Place the computer into Hibernation mode and replace the main battery with a charged spare not included with your computer Save your work and turn off the computer If you do not manage to do any of these things before the main battery completely runs out of power the computer automatically enters Hibernation mode and turns itself off Hibernation mode keeps track of where you were so that when you turn on the power again you can continue where you left off Setting battery notifications You can set two notifications Each notification can be set to alert you when a specified percentage of remaining battery power has been reached You can also set the computer to enter Sleep mode or Hibernation mode or to completely shut down when the notification goes off To change the default notification settings 1 While on the desktop click the battery fj icon in the notification area 2 Click More power options The Power Options window appears 3 Click Change plan settings under the power plan to be customized The Edit Plan Settings window appears Mobile Computing 01 Monitoring main battery power 4 Click Change advanced power settings The Advanced settings tab of the Power Options window appears 5 Double click Battery to display the battery options Advanced settings then choose settings that reflect how you want your f Select the power plan that you want to custom
59. ansfer USB allows hot swapping of peripherals See also bus hot swapping serial upload To send a file to another computer through a modem or network See also download USB See Universal Serial Bus USB USB Flash drive A small portable flash memory card that plugs into a computer s USB port and functions as a portable hard drive They are smaller and more durable than an external hard drive because they do not contain any internal moving parts but have less storage capacity See also Universal Serial Bus USB utility A computer program designed to perform a narrowly focused operation or solve a specific problem Utilities are often related to computer system management Web See World Wide Web Wi Fi A registered trademark term of the Wi Fi Alliance that stands for Wireless Fidelity and is another term for the communication protocol to permit an Ethernet connection using wireless communication components World Wide Web www The worldwide network of Web sites linked together over the Internet A user of the Web can jump from site to site regardless of the location of the computer hosting the site See also Internet Index A AC adaptor 38 AC power 86 AC power light 38 accessing network 105 adding memory check total memory 53 memory optional 45 optional external devices 45 adequate ventilation cooling fan 37 adjusting touch pad settings 66 app starting 77 App starting from Start screen
60. ap into place securely with the corresponding cutouts in the side of the module If the latches and cutouts do not line up correctly repeat steps 14 15 50 Getting Started Adding memory optional Sample Illustration Pressing down on the memory module Do not force the memory module into position The memory module should be completely inserted into the socket and level when secured in place Back of computer Slot B Slot A Sample Illustration Inserting the memory module into the slot NOTE For this model Slot A is the bottom slot Slot B is the top slot If only one memory module is to be installed it must be installed in Slot A 16 Replace the memory module slot cover and secure it using the screw s 17 Re insert the main battery For more information on inserting the main battery see Inserting a charged battery on page 95 18 Turn the computer right side up Make sure to remove the soft cloth from the work surface before restarting the computer Getting Started ol Adding memory optional WARNING Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet even if your computer is in Sleep mode In this condition observe the following Never cover your computer or AC adaptor with any object Never place your computer or AC adaptor near a heat source su
61. appears 2 Click Save backup copies of your files with File History under the System and Security heading Follow the on screen instructions to back up your files For additional Help while in the Windows Desktop screen press the F1 key to launch the Windows Help and Support screen Search for back up files General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware printers pointing devices external hard drives optical disc drive writers scanners etc and software applications like Microsoft Office and Adobe Photoshop or utility software such as special toolbars for your web browser o Create a restore point refer to Saving system configuration with restore points on page 149 Before installing anything use the System Restore utility to set a restore point see the section titled restore points If anything goes wrong you will then be able to easily restore the Windows operating system to 152 lf Something Goes Wrong Develop good computing habits the state it was in prior to the installation undoing any changes that the installation process introduced Back up your critical data see Backing up your data or your entire computer with the Windows operating system on page 151 Have your back up DVD s on hand in case you need any files from them Do not guess follow directions carefully It is often n
62. arked with icons execute specific functions on the computer For example F5 turns the touch pad ON OFF For more information see Functions on page 156 6 Learning the Basics Mouse properties Special Windows keys Windows key s Application key Sample Illustration Special Windows keys Your computer s keyboard has one key and one button that have special functions in Windows gt Windows key Toggles between the Desktop screen and the last app opened on the Start screen For more information refer to Help amp Support or see Exploring the Start screen on page 100 Application key Has a similar function as the secondary mouse button Mouse properties Mouse properties allow you to change your pointing device or mouse settings To access Mouse properties 1 Move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search F Charm click Settings and in the Search field type Mouse n the list that above click your selection The Mouse Properties screen appears You may change some of the settings in the following categories o Buttons Pointers Pointer Options You may see additional categories depending on your particular pointing device Adjust the settings as desired and then click OK Learning the Basics Starting an app 1 Starting an app To Start an app on the
63. arrying it for a long time may lead to shoulder and arm fatigue If you carry your notebook with other items consider using an ergonomically designed computer case Seeking additional help Follow the advice from your employer s company health and safety staff Contact them if you need assistance making adjustment to your workstation or adjusting the lighting Again if you experience persistent or recurrent pain ache numbness burning or stiffness you should promptly see a qualified health care provider These sensations may be caused by serious medical conditions that can be treated Getting Started 35 Selecting a place to work For more specific recommendations on the safety and comfort of your computer environment customers in the United States may visit the United States Department of Labor Occupational Safety amp Health Administration Web site at http www osha gov SLTC etools computerworkstations Check list I Is your chair comfortable does it support your back and arms well Are your feet flat on the ground Is there adequate space under your desk for your legs Are the keyboard and mouse at elbow level Are your shoulders relaxed when using the keyboard C C O L L Are your shoulders relaxed when using a mouse or other optional pointing device L Are your hands and wrists aligned in a comfortable straight posture Are your arms supported in the forearm area not at the wrist Do you hold
64. ars 5 Click the Tools tab 6 Click the Check button The Error Checking box appears The system will alert you if you need to scan the drive 7 Even if you do not need to scan the drive for errors you can scan by clicking Scan drive Error checking tests and repairs the storage drive Your hard disk seems very slow If you have been using your computer for a long time your files may have become fragmented Run Disk Defragmenter To do this 1 Move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search F Charm click Settings and in the Search field type Defragment Click Defragment and Optimize Drives From the Optimize Drives menu click the drive you wish to defragment 4 Click the Optimize button The system will display the status as it optimizes and defragments the drive lf Something Goes Wrong 1 43 Optical disc drive problems Your data files are damaged or corrupted Refer to your software documentation for file recovery procedures Many software packages automatically create backup files You may also be able to recover lost data using utility software Consult your network administrator Some applications run correctly but others do not This is probably a configuration problem If an application does not run properly refer to its documentation and check that the hardware configuration meets its needs Optical disc drive problems Yo
65. at To keep your computer in prime operating condition protect your work area from Dust moisture and direct sunlight Getting Started 31 Selecting a place to work gt Sd Equipment that generates a strong electromagnetic field such as stereo speakers other than speakers that are connected to the computer or speakerphones Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters Extreme heat cold or humidity Liquids and corrosive chemicals Keeping yourself comfortable This section provides information for setting up your work environment and tips for working comfortably throughout the day Computer user comfort recommendations Good Working Posture Adjust your chair height your feet should be flat on the floor and the bottom of your thighs should be evenly supported by the seat If your feet cannot reach the floor use a foot rest Avoid pressure points behind the knee or under the thigh The space under your desk should be free of clutter so that your legs and feet are not restricted and you can get close enough to your notebook and other items that you use frequently Adjust the chair back rest it should match the curve of your back and provide comfortable back support Adjust the chair arm rests they should be about the same height as the keyboard and comfortably support your arms allowing your shoulders to relax When using the
66. at can cause a battery pack to explode and or release caustic liquid both which may possibly cause Serious injury Always dispose of used battery packs in compliance with all applicable laws and regulations Put insulating tape such as cellophane tape on the electrode during transportation to avoid a possible short circuit fire or electric shock Failure to do so could possibly result in serious injury A WARNING Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User s Manual Other battery packs have different voltage and terminal polarities Use of non conforming battery packs could generate smoke or cause fire or rupture possibly resulting in Serious injury After repeated use the batteries will finally lose their ability to hold a charge and you will need to replace them Under certain applicable laws and regulations it may be illegal to dispose of old batteries by placing them in the trash Mobile Computing Traveling tips 99 Please be kind to our shared environment Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly In addition Toshiba s recycling initiatives include recycling programs events and consumer promotions For details please visit us toshiba com green Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle a program of the Rechargeable Batt
67. back up the information stored on your internal storage drive Use Windows to back up files or the entire computer to an optical disc or external hard disk Here are some ways you can do this Use the Windows operating system to back up files or your entire computer to an optical disc or external hard disk Copy files to a rewritable external storage device Connect your computer to the office network and copy files to your network partition Some people use a combination of these methods backing up all files weekly and copying critical files to external media on a daily basis If you have installed your own applications you should back up these applications as well as your data files If something goes wrong that requires you to reformat your internal storage drive and start again reloading all your applications and data files from a backup source will save time lf Something Goes Wrong 1 49 Develop good computing habits Read the user s guides It is very difficult to provide a fail safe set of steps you can follow every time you experience a problem with the computer Your ability to solve problems will improve as you learn about how the computer and its software work together Get familiar with all the user s guides provided with your computer as well as the manuals that come with the applications and devices you purchase Your local computer store or book store sells a variety of self help bo
68. be resumed only when they are modified and can no longer cause interference The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial scientific and medical radio emission electric machinery Optical Disc Drive Safety Instructions rWyVfeysa 9 This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read the User s Guide carefully and keep it for your future reference Never attempt to disassemble adjust or repair an optical disc drive You could damage the drive You would also be exposed to laser light or other Safety hazards resulting in serious injury Always contact an authorized iai Toshiba service provider if any repair or adjustment is required Location of the Required Label Sample shown below Location of the label and manufacturing information may vary PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE MANUFACTURED TOSHIBA CORPORATION 1 1 1 SHIBAURA MINATO KU TOKYO 105 8001 JAPAN 16 Copyright This guide is copyrighted by Toshiba America Information Systems Inc with all rights reserved Under the copyright laws this guide cannot be reproduc
69. bus An electrical circuit that connects the central processing unit CPU with other parts of the computer such as the video adapter disk drives and ports It is the pathway through which data flows from one device to another See also bus speed frontside bus bus speed tThe speed at which the central processing unit CPU communicates with the other parts of the computer Glossary 1 6 cache A section of very fast memory in which frequently used information is duplicated for quick access Accessing data from cache is faster than accessing it from the computer s main memory See also CPU cache LI cache L2 cache CD An individual compact disc See also CD ROM CD ROM Compact Disc Read Only Memory A form of high capacity storage that uses laser optics instead of magnetic means for reading data See also CD Compare DVD ROM Central Processing Unit CPU The chip that functions as the brain of the computer It takes information from outside sources such as memory or keyboard input processes the information and sends the results to another device that uses the information character Any letter number or symbol you can use on the computer Some characters are non printing characters such as a paragraph break in a word processing program A character occupies one byte of computer storage Charm Charms Start screen icons that slide out from the right side of the screen and direct you to various Windows
70. ce a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off either one of your Bluetooth or Wireless LAN Please contact Toshiba computer product support on Web site http www toshiba europe com computers tnt bluetooth htm in Europe or support toshiba com in the United States for more information 14 Bluetooth Wireless Technology and Your Health The products with Bluetooth wireless technology like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Bluetooth wireless technology is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include Using the equipment with Bluetooth wireless tech
71. ch as an electric blanket or heater s Never cover or block the air vents including those located at the underside of the computer Always operate your computer on a hard flat surface Using your computer on a carpet or other soft material can block the vents located at the underside of the computer Overheating your computer or AC adaptor could cause system failure computer or AC adaptor damage or a fire possibly resulting in Serious injury gt gt 19 Reconnect the cables 20 Restart the computer TECHNICAL NOTE You must have at least one memory module installed for the computer to work You can now continue setting up the computer When the operating system has loaded you can verify that the computer has recognized the additional memory module If you are adding extra memory after setting up the computer verify that the computer has recognized it correctly as described in Checking total memory on page 53 Removing a memory module If you need to remove a memory module 1 Complete steps 1 10 in Installing a memory module on page 45 to shut down the computer and open the memory module slot cover 5 Getting Started Adding memory optional CAUTION Do not try to remove a memory module with the computer turned on You can damage the computer and the memory module Do not remove the memory module while the computer is in Sleep or Hibernation mode The computer co
72. ch feature appears 2 Click Settings 1 36 lf Something Goes Wrong Memory problems From the list of device s click Device Manger To view the device s installed double click the device type The operating system displays the device Properties dialog box which provides an array of tabs They may include The General tab which provides basic information about the device The Resources tab which lists resources assigned to the device This tab does not appear if the device is not using resources The Driver tab which displays the drivers being used by the device This tab also provides options for updating the driver or rolling back the driver in case the new version is causing a problem The tabs that appear in the dialog box vary from one device to another For more information about Device Manager refer to Windows online Help Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related It is worthwhile checking for these first 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings R3 Charm 3 In the lower right of the screen click the Power f icon Shut down option x Shut down acie Restart Power button a Notifications Power Keyboard Sample Image Shut down 4 While holding the Shift key c
73. charging may be depleted or may be defective Turn the computer off insert the battery turn the computer on and then leave the computer running for several hours which will deliver a slow steady trickle charge to the battery Once the battery has been trickle charged it may begin working correctly again lf Something Goes Wrong 1 31 The Windows operating system is not working If the trickle charging does not prove effective visit the Toshiba Web site at support toshiba com and see the Support Bulletin Step Charging the computer s battery click the Ask Iris link and search for the support bulletin by name 4 Connect the AC adaptor to a different power outlet preferably in a different room If the computer starts normally there may be a problem with the AC outlet itself or the voltage level available from it 5 Verify that the AC adaptor is the correct unit for your computer model The computer may not be able to start from an AC adaptor that is rated for less current amperage than the computer requires even if the rated voltage is correct and the plug fits correctly in the DC IN socket The labels on the bottom of the computer and the AC adaptor show the specifications for voltage V and current A for each device The voltage level must match exactly The amperage rating of the AC adaptor must be equal to or greater than that required by the computer The battery light is blinking when the comput
74. ct Disc CD ROM Compact Disc Read Only Memory CD RW Compact Disc Rewrite Memory CMOS Complementary Metal Oxide Semiconductor CPU Central Processing Unit DC Direct Current DMA Direct Memory Access DIMM Dual Inline Memory Module DOS Disk Operating System 163 1 64 Glossary DPI Dots Per Inch DVD Digital Versatile or Video Disc DVD ROM Digital Versatile or Video Disc Read Only Memory eSATA external Serial Advanced Technology Attachment FAT File Allocation Table FCC Federal Communications Commission GB gigabyte Gbps gigabytes per second HDD Hard Disk Drive HDMI High Definition Multimedia Interface HDMI CEC High Definition Multimedia Interface Consumer HTML IEEE I O IRQ ISP KB LAN LCD LED MB Mbps MIDI PC PCI PCMCIA RAM RGB RFI ROM Electronics Control Hypertext Markup Language Institute of Electrical and Electronics Engineers Input Output interrupt request Internet Service Provider kilobyte Local Area Network Liquid Crystal Display Light Emitting Diode megabyte megabytes per second Musical Instrument Digital Interface Personal Computer Peripheral Component Interconnect Personal Computer Memory Card International Association Random Access Memory Red Green Blue light monitor Radio Frequency Interference Read Only Memory Glossary 1 65 RTC Real Time Clock SD Secure Digital SDRAM Synchronous Dynamic Random Access Memory SSD Solid State Drive TFT Thin Film Transistor USB Un
75. d Second screen only Second screen Project to a connected screen second screen only EEEE Sample Image Display options window NOTE The gm P keys navigate through the options without activating a selection Press ENTER to activate a selection 10 Getting Started Customizing your computers settings NOTE You may also use the F4 key and then press ENTER to activate a selection Adjusting the quality of the external display To obtain the best picture quality from your television or other video display device you may need to adjust the video settings See the video device documentation for additional configuration steps Customizing your computer s settings There are several ways in which you can customize your computer to suit your particular requirements You can go into your computer settings to make adjustments to your computer to suit your needs From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Settings f Charm and then click Change PC Settings Then choose a category you wish to change Refer to your operating system documentation or Help and Support for details You may also wish to customize your power usage settings For more information see Power Plans on page 92 There are additional custom settings you can choose See Utilities on page 110 Caring
76. d to this equipment Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception shielded cables must be used between the external devices and the computer s ports Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation Contact Toshiba s Support Web site at support toshiba com Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conform a la norme NMB 003 du Canada Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum DSSS radio technology and is compliant to The IEEE 802 11 Standard on Wireless LANs Revision A B G as defined and approved by the Institute of Electrical and Electronics Engineers The Wireless Fidelity Wi Fi certification as defined by the Wi Fi Alliance The Wi Fi CERTIFIED logo is a certification mark of t
77. e such as a lamp Verify that the computer is on by looking at the ON OFF indicator If the indicator is glowing the computer is on Also try turning the computer off and then on If you are using an AC adaptor verify that the computer is receiving power from the external power source by looking at the AC power light If the indicator is glowing the computer is connected to a live external power source The computer starts but when you press a key nothing happens Verify that the active application accepts text input Try clicking your mouse on an area where you can type text and try typing again Your computer may be in Sleep mode and have a software or resource conflict When this happens turning the power on returns you to the problem instead of restarting the system To clear the condition press Ctrl Alt and Del simultaneously Then shut down the computer via software or follow the steps if your application stops responding see Problems that are easy to fix on page 128 1 30 lf Something Goes Wrong Problems when you turn on the computer The computer displays the WARNING RESUME FAILURE Windows Error Recovery Windows did not shut down successfully message To continue select Start Windows normally This can happen if the computer was put into Sleep mode and the battery has discharged If you performed a shutdown before this message was displayed an application or driver may have prevented Windows from
78. e characters will appear when you enter data D Desktop Displays the standard Windows operating system look and feel default tThe setting selected by a program when the user does not specify an alternative setting device A component attached to the computer Devices may be external outside the computer s case or internal inside the computer s case Printers disk drives and modems are examples of devices device driver A program called a driver that permits a computer to communicate with a device dialog box An on screen window displayed by the operating system or a program giving a direction or requesting input from the user Direct Current DC The type of power usually supplied by batteries DC flows in one direction Compare Alternating Current AC Direct Memory Access DMA A dedicated channel bypassing the CPU that enables direct data transfer between memory and a device directory See folder disable To turn a computer option off See also enable disc A round flat piece of material designed to be read from and written to by optical laser technology and used in the production of optical discs such as CDs and DVDs Compare disk disk A round flat piece of material that can be magnetically influenced to hold information in digital form and used in the production of magnetic disks such as hard disks Compare disc See also hard disk Glossary 1 69 disk drive
79. e operating system fails to start properly you may need to troubleshoot the Operating System and or its settings There are several options to choose from depending on the severity of the problem and your level of expertise with computers If Windows fails to start properly twice the Windows Boot menu will launch To enter the Boot menu manually 1 Press Ctrl Alt and Del simultaneously once 2 Press the Power button in the lower right corner of your screen 3 Click the Restart option from the menu 4 Click Troubleshoot from the menu You now have several options Refresh your computer Your files and personalization settings won t change Your computer settings will be changed back to their defaults Your Apps from the Windows Store are retained Apps you installed from discs or Web sites are removed A list of removed apps is saved to your desktop For more information see Refresh your PC with user s data on page 58 Reset your computer All of your personal files and apps are removed Your computer settings are changed back to their defaults For more information see Reset your PC on page 60 lf Something Goes Wrong 1 33 The Windows operating system is not working Advanced options Clicking this option presents you with another set of options System Restore System Restore allows you to use a Restore point to return the computer to a state at which it was performing
80. e to follow this instruction could result in an electric shock possibly resulting in Serious injury The computer s main battery light gives you an indication of the main battery s current charge Glows amber while the main battery is being charged AC adaptor connected Glows white when the main battery is fully charged Sd Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE If the AC power light flashes amber during charging either the main battery is malfunctioning or it is not receiving correct input from the AC power supply Disconnect the AC power cord cable and remove the main battery pack See Changing the main battery on page 94 for information on replacing the main battery Getting Started 4 Charging the main battery Charging the main battery Before using the battery to power the computer you must charge the battery To charge the battery leave the computer plugged into an AC power source with the computer turned off until the battery light glows white After that the battery will be completely charged and ready to power the computer C CAUTION Once the battery is charged for the first time avoid leaving the computer plugged in and turned off for more than a few hours at a time Continuing to charge a fully charged battery can damage the battery Using the computer for the first time
81. e you added a device such as a memory module that takes its power from the battery Is your software using the internal storage drive more Is the display power set to turn off automatically Was the battery fully charged to begin with All these conditions affect how long the charge lasts After a period of time the battery will lose its ability to perform at maximum capacity and will need to be replaced This is normal for all batteries To purchase a new battery pack see your accessories information included with your computer or visit the Toshiba Web site at accessories toshiba com Refer to this site often to stay current on the most recent software and hardware options for your computer and for other product information For more information on maintaining battery power see Changing the main battery on page 94 Keyboard problems NOTE To capture a print screen of the entire screen press the Fn PRTSC key To capture only the active window displayed press Fn ALT while simultaneously pressing the PRTSC key You have connected an external keyboard and the operating system displays one or more keyboard error messages You may need to update your keyboard driver Refer to the documentation that came with the keyboard or to the keyboard manufacturer s Web site lf Something Goes Wrong Display problems 1 39 The keyboard you connected may be defective or incompatible with the computer Try using a different
82. ecessary to run an installation utility first before connecting a new hardware item to the computer If the device is connected first it may be very difficult to complete the installation successfully Always carefully follow the installation instructions that accompany the hardware or software Restart the Windows operating system Always restart the Windows operating system after each installation even if the installation utility does not prompt you to do so This will ensure that the installation is completed and will clean up anything that the installation utility left behind Do one installation at a time If you have several new items to add to your computer system install just one at a time creating restore points immediately before each successive installation This will make it much easier to determine the origin of any new problems For best results follow this sequence 1 Back up critical data Create a restore point Install one item of hardware or software Restart the Windows operating system nan AeA Ww N Use the new hardware or software for a while noting any new problems Make sure that your critical applications email business applications etc are working correctly and verify that important devices are still functioning 6 For each additional hardware or software item repeat these steps starting at step 1 if any of your critical data has changed or starting at step 2 if no critical data has c
83. ecover the factory default software refresh your PC while the computer will attempt to back up your data using the utilities stored on your computer s internal storage drive TECHNICAL NOTE Your data will be copied into the backup folder All of the data will be moved to this folder during the recovery process however the current directory structure will be retained 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings eq Charm Recovering the Internal Storage Drive Getting Started 09 3 Click Change PC Settings The PC settings window appears PC settings Personalize Users Notifications Search Share et Privacy Devices Wireless Ease of Access Sune urur cottinerc Available storage Yow Neve 660 CA pemtatie Soe fore Mun pr your apn are wun eae Refresh your PC without affecting your files F your PC art puweng wel you cet refresh E whaa oer your preteen muse wo aud Ofer perona f es ae Get started STIS Remove everything and reinstall Windows F yOu ward O roccie pour PC oF shart wet Coergietety pow Cert eiet A to factory serg PSE Advanced startup Sart wp Porm a Aror oF Aac Duch ata USE Give or UVOL change your PCr tase vetting Change Windoes isto wetting o restore Windom from iyiler mage Mua ell restart poor PC ey CADE Revit now Sample Image PC set
84. ed in any form without the prior written permission of Toshiba No patent liability is assumed however with respect to the use of the information contained herein 2012 by Toshiba America Information Systems Inc All rights reserved Export Administration Regulation This document contains technical data that may be controlled under the U S Export Administration Regulations and may be subject to the approval of the U S Department of Commerce prior to export Any export directly or indirectly in contravention of the U S Export Administration Regulations is prohibited Notice The information contained in this manual including but not limited to any product specifications is subject to change without notice TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS INC TOSHIBA PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL SPECIAL OR EXEMPLARY DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER
85. eep and Charge This utility can be used to enable or disable the USB Sleep and Charge function To enable this function select Enable To disable this function toggle the Enable button to the Disabled position You can also control whether charging takes place when the computer is running on battery power To do so select or de select the Enable under Battery Mode check box in the utility If you enable charging when the computer is running on battery power you can specify that charging stops when battery power drops below a certain level Use the slider at the bottom of the utility window beneath the Lower limit of remaining battery life heading to specify when charging should stop For example if you set the slider to 10 charging will stop when 10 or less of the battery power remains Power supply mode settings Your computer may provide two different charging modes to support various types of USB devices If your computer provides more than one charging mode the charging mode you should select depends on the USB device you want to charge For example Auto Mode which is the default mode will charge a wide variety of digital audio players If your device does not charge in Auto Mode try using Alternate Mode To select a different charging mode use the Power supply mode drop down list in the utility TOSHIBA X a Set advanced features when the computer is in sleep mode hibernate mode a hd shutdo wn tate jon ow
86. eep and Charge function to charge external devices will take longer than charging the devices with their own chargers If an external device is connected to the compatible port when the AC adaptor is not connected to the computer the battery of the computer will be depleted even when the power of the computer is turned OFF As such we recommend that you connect the AC adaptor to the computer when using the USB Sleep and Charge function e External devices connected to the USB bus power DC 5V function that interfaces with the power ON OFF of the computer may always be in an operational state When there is a current overflow of the external device connected to the compatible port USB bus power DC 5V supply may be Stopped for safety reasons When USB Sleep and Charge function is set to Enabled the USB Wakeup function does not work for compatible port In that case if there is a USB port that does not have the USB Sleep and Charge function compatible icon 4 attach the mouse or keyboard to it The USB Wakeup function will now work but the USB Sleep and Charge function will be disabled gt Sd AWARNING Metal paper clips or hair pins clips will generate heat if they come into contact with USB ports Do not allow USB ports to come into contact with metal products for example when carrying the computer in your bag Utiliti 1 22 Tod Charge Enabling Disabling USB Sl
87. egular intervals Check your application s documentation to see if it has an automatic save feature Backing up your work Back up all the files you create in case something happens to your computer You can back up your files to different types of media such as CDs DVDs external storage media or to a network if available To back up several files at one time use the Microsoft Windows file recovery program preinstalled on the computer s internal storage drive Also see Backing up your data or your entire computer with the Windows operating system on page 151 Co HINT Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs DVDs You may prefer to use a high capacity file recovery system such as an external hard drive Using the optical disc drive Optical storage is a popular medium for software music and video Digital versatile discs DVDs provide a significant increase in data storage and support features that were not available on previous video platforms These features include wide screen movies multiple language tracks digital surround sound multiple camera angles and interactive menus TECHNICAL NOTE Your optical disc drive is set to play region 1 North America DVD ROMs If you play a DVD disc from another region the drive will automatically change to play in the format of the other region The drive will allow you to change reg
88. egulations 9 Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial scientific and medical radio emission electric machinery this Equipment in Japan In Japan the frequency bandwidth of 2 400 MHz to 2 483 5 MHz for second generation low power data communication systems such as this equipment overlaps that of mobile object identification systems premises radio station and specified low power radio station 1 Sticker Please put the following sticker on devices incorporating this product The frequency bandwidth of this equipment may operate within the same range as industrial devices scientific devices medical devices microwave ovens licensed radio stations and non licensed specified low power radio stations for mobile object identification systems RFID used in factory product lines Other Radio Stations 1 Before using this equipment ensure that it does not interfere with any of the equipment listed above 2 If this equipment causes RF interference to other radio stations promptly change the frequency being used change the location of use or turn off the source of emissions 3 Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations 2 Indication The indication shown below appears on this equipment 1 2 3 2 4DSOF4 1 2 4 This equipment uses a frequency of 2 4 GHz
89. en double click the Desktop Assist icon 2 Click Tools amp Utilities 3 Click the Supervisor Password icon A pop up screen appears asking for a password Enter your password Click Delete An authority verification pop up screen appears 6 Click Delete 7 Enter the password and then click Verify 8 Click OK to exit 1 1 8 Utilities Setting passwords Using a user password A user password provides power on password protection Setting a user password CAUTION f you choose to set a supervisor or user password TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it TOSHIBA is not responsible for any losses that may occur to you your organization or others as a result of the inability to access your computer To register a password for the power on password functions 1 To access User Password from the Start screen begin typing User Password or while in the Desktop screen double click the Desktop Assist icon Click Tools amp Utilities Click the User Password icon Click Set Enter your password and then enter it again to verify Click Set Click OK to save your password as a text file Click Save Click OK SmANAD NN B amp B Ww WY Deleting a user password To cancel the power on password function 1 To access User Password from the Start screen begin typing User Password or while in the Desktop screen do
90. er is on If the battery light is blinking when the computer is on this indicates a power mismatch Do the following 1 Check the OUTPUT specifications on the AC adaptor for example DC 19V 3 95A 2 Check the INPUT specifications on the bottom of the computer The output specifications of the AC adaptor must match the input specifications of the computer 3 If the specifications do not match locate and use the AC adaptor that shipped with your computer If the specifications do match contact Toshiba See Contacting Toshiba on page 154 The Windows operating system is not working Once you are familiar with your computer and used to the way the operating system responds to your work routine you can easily detect if the operating system is not working correctly For example The operating system fails to start after the initial startup appears The operating system takes a long time to start 1 3 lf Something Goes Wrong The Windows operating system is not workin p 8 SY 8 The operating system responds differently from the normal routine The screen does not look right Unless a hardware device has failed problems usually occur when you change the system in some way such as installing a new application or adding a device If you experience any of these problems use the options in the Startup menu to fix the problem Using Startup options to fix problems If th
91. er screen in which each pixel of every line is refreshed as the electron beam scans across and down the screen Compare interlaced non system disk A disk for storing programs and data that cannot be used to start the computer Compare system disk online Available through the computer Online may refer to information being read from your own computer s internal storage drive such as online documentation or online Help or to information coming from another company on a company network or the Internet operating system A set of programs that controls how the computer works Examples of operating systems are the Windows Vista Windows 7 and Windows 8 operating systems optical disc drive A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data music or videos palette See color palette password A unique string of characters entered by a user to verify his or her identity to the computer or the network PC Card A credit card sized expansion card designed to increase the capabilities of computers PC Cards provide functions such as modem fax modem hard disk drive network adapter sound card or SCSI adapter peripheral Any device such as a printer or joystick that is attached to the computer and controlled by the computer s CPU 1 14 Glossary pixel Short for picture element The smallest dot that can be produced on a screen or printe
92. er supply via USB port when the computer ts in G 4 hutdoan stat Sleep and Charge Enable this option to use U 3 th m General sleep mo j ate mo t Pep and Cr n Uwe ppi a Me Display Boot Function under Battery Mode Enable thuis phon k j Sleep and Charge or the M t Funchon when the Keybourd computer is running off battery USS Enabled l ower kmit of remaining battery kie SATA Cance Apply LAN X Sample Image Sleep and Charge screen NOTE With certain external devices the USB Sleep and Charge function may not work no matter which charging mode you select In those cases disable USB Sleep and Charge in the utility and turn the computer on to charge the device or use a different charging device Utilities 1 23 Function Key Function Key Turns notifications for touch pad status ON OFF TOSMIBA _ x TOSHIBA Function Key enables functions when pressing speciic keys or in combination with Fn Some tunctioss show the toast notiicabon at the edge of the xreen These settings turn on oll nothcabors Status Notification Touch Pad oe a ff Sample Image Function Key NOTE The Function option is disabled by default 1 24 Utilities PC Diagnostic Tool Utility PC Diagnostic Tool Utility This utility can help diagnose problems with devices in your computer Refer to the online Help documentation within the application for additional help NOTE The PC Diagnostic Tool utility may show tests
93. erica Information Systems Inc 9740 Irvine Boulevard Irvine California 92618 United States Canada Toshiba Canada Ltd 191 McNabb Street Markham Ontario L3R 8H2 Canada Germany Toshiba Europe GmbH LeibnizstraBbe 2 D 93055 Regensburg Germany Japan Toshiba Corporation PCO IO 1 1 Shibaura 1 Chome Minato Ku Tokyo 105 8001 Japan Mexico Toshiba de M xico S A de C V Sierra Candela No 111 6to Piso Col Lomas de Chapultepec CP 11000 Mexico DE United Kingdom Toshiba Information Systems U K Ltd Toshiba Court Weybridge Business Park Addlestone Road Weybridge Surrey KT15 2UL United Kingdom The Rest of Europe Toshiba Europe I E GmbH Hammfelddamm 8 D 4 1460 Neuss Germany For more information on additional Toshiba worldwide locations please visit www toshiba co jp index htm Appendix A TOSHIBA Function Keys TOSHIBA Function keys provide a quick way to modify selected system functions and to launch applications Functions TOSHIBA Function keys are used to set or modify the following system functions Help file Brightness control Output Display switch Touch pad Media buttons Mute Wireless 156 TOSHIBA Function Keys 1 5 Functions Help file This TOSHIBA Function key displays the help file Display brightness This TOSHIBA Function key decreases the screen brightness This TOSHIBA Function key increases the screen bri
94. ery Recycling Corporation For more information and for drop off locations visit www rbrc org or call 1 800 822 8837 Notice regarding CR coin cell batteries applicable to California U S A only Perchlorate Material special handling may apply See http www dtsc ca gov hazardouswaste perchlorate Traveling tips The environmental precautions listed in Selecting a place to work on page 30 also apply while traveling o Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust Always travel with the computer in a carrying case Toshiba offers a choice of carrying cases for the computer They all provide plenty of extra space for manuals power cords and compact discs Contact your authorized Toshiba representative for more information or visit Toshiba s Web site at accessories toshiba com TECHNICAL NOTE When traveling by air you may be required to pass your computer through airport security equipment The X ray equipment will not harm your computer NOTE Before using your computer aboard an aircraft make sure the Wireless antenna is OFF Airplane mode is ON if your computer has wireless LAN capability NOTE To enable or disable wireless communication use the F12 key For more information see TOSHIBA Function Keys on page 156 Chapter 4 Exploring Your Computers Features In this chapter you will explore some of the special feat
95. f certain Hazardous Substances in electrical and electronic equipment RoHS which restricts use of lead cadmium mercury hexavalent chromium PBB and PBDE Toshiba requires its computer component suppliers to meet ROHS requirements and verifies its suppliers commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process NOTE Certain Microsoft software product s included with this computer may use technological measures for copy protection IN SUCH EVENT YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES Product activation procedures and Microsoft s privacy policy will be detailed during initial launch of the product or upon certain reinstallations of the software product s or recontigurations of the computer and may be completed by Internet or telephone toll charges may apply some software may differ from its retail version if available and may not include user manuals or all program functionality Introduction 21 This guide NOTE This guide The product specifications and configuration information are designed for a product Series Your particular model may not have all the features and specifications listed or illustrated For more detailed information about the features and specifications on your particular model please visit Toshiba s Web site at support toshiba com While Toshiba
96. ff Unplug and remove any cables connected to the computer including the AC adaptor CAUTION Do not try to remove a memory module with the computer turned on You can damage the computer and the memory module Do not remove the memory module while the computer is in Sleep or Hibernation mode The computer could hang up the next time you turn it on and data in memory will be lost In either of the above cases the Sleep configuration will not be saved Place a soft cloth on the work surface to prevent scratching the top cover of the computer and then place the computer upside down on the cloth Remove the main battery For information on removing the main battery see Removing the battery from the computer on page 94 To locate your memory module slot cover please refer to your Quick Start document 8 Using a small Phillips screwdriver loosen the screw s that secure the memory module slot cover Back of computer Sample Illustration Removing the memory module slot cover 48 Getting Started Adding memory optional 9 Remove the memory module slot cover 10 Place the screw s and the cover in a safe place so that you can retrieve them later CAUTION Static electricity can damage the memory module Before you handle the module touch a grounded metal surface to discharge any static electricity you may have built up Avoid touching the connector on the memory module or on the c
97. for features you do not have This is normal and does not indicate a problem To use the PC Diagnostic Tool utility 1 To access PC Diagnostic Tool utility from the Start screen begin typing PC Diagnostic Tool or while in the Desktop screen double click the Desktop Assist icon Click Support amp Recovery Click PC Diagnostic Tool The PC Diagnostic Tool window appears 4 Click the Diagnostic Tool tab TOSHIDA lis himin Dagi Tes a Diagnostic Tool A cope ten can Be rum oe She built in devices of thig PC Tesl erm Status He Ecru Seer H M GDS Par Be awe Sour H 0 A MODEN H O Diremas H Pe Me TWOR 1 use HO LINK D ro CRE HA Sonove one i GHAR DOESK Sample Image PC Diagnostic Tool window 5 Select the device s that you would like to test by clicking the check box that appears to the left of the device NOTE Click the plus and minus symbols to expand and collapse the categories 6 Click Start Diagnostics when you are ready to begin the tests Utilities 1 a5 PC Health Monitor PC Health Monitor Available on certain models The PC Health Monitor software program monitors computer system functions such as power consumption the cooling system and the 3D Accelerometer available on certain models It alerts users to specific system conditions via pop up messages It also tracks the usage of the computer and related devices and logs service relevant information on the
98. for your computer This section gives tips on cleaning and moving your computer For information about taking care of your computer s battery see Taking care of your battery on page 97 NOTE Please handle your computer carefully to avoid scratching or damaging the surface Getting Started 11 Caring for your computer Cleaning the computer CAUTION Keep liquids including cleaning fluid out of the computer s keyboard speaker and other openings Never spray cleaner directly onto the computer and or display Never use harsh or caustic chemical products to clean the computer To keep your computer clean gently wipe the display panel and exterior case with a lightly dampened cloth Moving the computer Before moving your computer even across the room make sure all drive activity has ended the internal storage drive and optical disc drive indicator lights stop glowing and all external peripheral cables are disconnected CAUTION Do not pick up the computer by its display panel or by the back Doing so could damage the system Using a computer lock You may want to secure your computer to a heavy object such as your desk The easiest way to do this is to purchase an optional computer lock cable For more information on purchasing a cable lock visit accessories toshiba com Sample Illustration Computer lock cable To secure the computer 1 Wrap the cable through or around some part of a heav
99. ghtness 158 TOSHIBA Function Keys Functions Output Display switch F4 This TOSHIBA Function key cycles through the display options and highlights the available options Only the first option is available when you do not have an external monitor attached NOTE All modes are always displayed on the screen however only the available modes for your system are functional PC screen only Duplicate Extend Second screen only Second screen H Tep f la Dupa Sample Image Display mode options window TOSHIBA Function Keys AQ Functions Disabling or enabling the touch pad 0 F5 Media buttons gt Iil F8 mT _ Oo This TOSHIBA Function key enables disables the touch pad To enable disable the touch pad press F5 For more information on using the touch pad see Using the touch pad on page 64 This TOSHIBA Function key allows you to return to the preceding track on the disc This TOSHIBA Function key allows you to start playing the disc or pause it if currently playing This TOSHIBA Function key allows you to skip to the following track on the disc This TOSHIBA Function key decreases the volume of the sound coming from the computer This TOSHIBA Function key increases the volume of the sound coming from the computer 1 60 TOSHIBA Function Keys Functions Volume Mute This TOSHIBA Function key enables disables volume mute on your compu
100. grams or people from doing things on your computer without your permission If you were trying to perform the action click Continue otherwise click Cancel If unsure cancel and try again Recovering the Internal Storage Drive Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary The following internal storage drive recovery options are available Recovery option Creating recovery This option allows you to create the recovery media you media will use to restore your computer See Creating recovery media on page 55 Restoring from This option allows you to restore your system from the recovery media recovery media you created See Restoring from recovery media on page 57 Refresh your PC This option allows you to refresh your system without with user s data losing your data See Refresh your PC with user s data on page 58 Reset your PC This option allows you to remove all data from your system and reinstall Windows See Reset your PC on page 60 A recovery image of your computer is stored on the internal storage drive and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below However it is strongly recommended that you create recovery media If the recovery files on your internal storage drive become corrupted or are deleted you can restore your syste
101. h the computer s operating system Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it frontside bus The primary pathway bus between the CPU and the computer s main memory Also called system bus See also bus Function key 1 A feature in which certain keys in combination with the Fn key can set system options or control system parameters such as the battery save mode 2 A key or combination of keys that activates a memory resident program function keys The keys labeled F1 through F12 typically located on the keyboard Their function is determined by the operating system and or individual programs G ground A conductor to which all components of an electric circuit are connected It has a potential of zero 0 volts is connected to the earth and is the point of reference for voltages in the circuit H hard disk A storage device composed of a rigid platter or platters that can be magnetically coded with data Hard disks hold much more information than some external media and are used for long term storage of programs and data The primary or only hard disk in a computer is usually fixed but some computers have secondary hard disks that are removable Glossary 1 11 hardware The physical components of a computer system Compare software HDMI High Definition Multimedia Interface An interface used to transmit high qua
102. hanged lf Something Goes Wrong 1 53 Develop good computing habits USB Sleep and Charge is not working USB Sleep and Charge may be disabled Open the TOSHIBA Sleep and Charge utility to check if the feature is disabled and to enable it if necessary Make sure that the device you want to charge is connected to a port that supports the USB Sleep and Charge function Ports that support this feature are identified with the 4 icon USB Sleep and Charge may be disabled Open the TOSHIBA Sleep and Charge utility to check if the feature is disabled and to enable it if necessary For more information see Enabling Disabling USB Sleep and Charge on page 122 Try selecting a different charging mode in the TOSHIBA Sleep and Charge utility if your computer provides more than one charging mode For more information see Power supply mode settings on page 122 gt If you are attempting to charge a device without an AC adaptor connected to the computer the computer s battery power may be below the limit specified in the TOSHIBA Sleep utility or the battery may be depleted Lower the limit in the TOSHIBA Sleep utility to enable charging at the current battery power level or if battery power is running low or is depleted connect the AC adaptor to your computer The USB Sleep and Charge function may not work with certain external devices even if they are compliant with the USB specification In those cases po
103. he computer when opening the display panel while the computer is turned off Display Allows you to select the internal LCD and or external monitor when the computer boots up NOTE When the computer restarts it remembers the last configuration If data does not appear on the display you are using after starting in Sleep mode press the gm P keys to toggle the display For more information see Directing the display output when you turn on the computer on page 69 Utiliti 20 Tod Charge General Allows you to view the current BIOS version or change certain settings back to their default values Keyboard Allows you to access the wake on keyboard function or to configure the function keys LAN Allows you to set networking functions SATA Allows you to set conditions for SATA Sleep and Charge See Sleep and Charge on page 120 USB Allows you to enable or disable USB Legacy Emulation USB 3 0 Sleep and Charge This utility displays whether the USB Sleep and Charge function is enabled or disabled and shows the position of the USB port that supports the USB Sleep and Charge function 1 While in the Desktop screen double click the Desktop Assist icon Click Tools amp Utilities 3 Click System Settings Click Sleep and Charge USB Sleep and Charge Your computer can supply USB bus power DC 5V to the USB port even when the computer is in Sleep mode Hibernation mode
104. he Wi Fi Alliance CAUTION Bluetoottf and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use B uetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off your Bluetooth or Wireless LAN device Please contact Toshiba computer product support on Web site htto www toshiba europe com computers tnt bluetooth htm in Europe or support toshiba com in the United States for more information O1 CAUTION Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5 15 GHz to 5 25 GHz frequency range FCC requires this product to be used indoors for frequency range 5 15 GHz to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of the 5 25 GHz to 5 35 GHz and 5 65 GHz to 5 85 GHz bands These radar stations can cause interference with and or damage this device NOTE The above caution applies to products that operate with an 802 11a radio device Wireless LAN and Your Health Wireless LAN products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless LAN devices however is far much less than the
105. he disc For example if it is a music CD open Windows Media Player and use it to select and then play the CD For other types of media use the associated software to open the files on the disc 82 Learning the Basics Using the optical disc drive Recording optical media Depending on the configuration your computer may come with an optical disc drive that allows you to Play pre recorded and recorded optical media Read write data and multi media files to recordable optical media For more information regarding supported optical media formats please refer to your computer s detailed specifications at support toshiba com NOTE Due to manufacturing and quality variations in third party optical media e g CD or DVD or optical media players recorders in certain cases your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo or play back optical media recorded by other computers or optical media recorders Additionally certain optical media recorded on your optical disc drive may not play back or operate properly on other computers or optical media players These problems are not due to any defect in your Toshiba computer or optical disc drive Please refer to your computer s product specification for listing of specific format compatibilities Copy protection technology may also prevent or limit recording or viewing of certain optical media For details on how to u
106. he equipment certification number only signifies that the Industry Canada technical specifications were met To prevent radio interference to the licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing y Pour empecher que cet appareil cause du brouillage au service faisant l objet d une licence il doit etre utilize a l interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal Si le matriel ou son antenne d emission est installe a l exterieur il doit faire l objet d une licence CAUTION This device is restricted to indoor use due to its operation in the 5 15 GHz to 5 25 GHz frequency range Industry Canada requires this product to be used indoors for frequency range 5 15 GHz to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of the 5 25 GHz to 5 35 GHz and 5 65 GHz to 5 85 GHz bands These radar stations can cause interference with and or damage this device NOTE The above caution applies to products that operate with an 802 11a radio device EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards C This product is carrying the CE Mark in accordance with the related Europe
107. he printer will not print Check that the printer is connected to a working power outlet turned on and ready on line Check that the printer has plenty of paper Some printers will not start printing when there are just two or three sheets of paper left in the tray lf Something Goes Wrong 1 45 Wireless networking problems Make sure the printer cable is firmly attached to the computer and the printer or the wireless connection is good Run the printer s self test to check for any problem with the printer itself Make sure you installed the proper printer drivers as shown in the instructions that came with the printer You may have connected the printer while the computer is on Disable Sleep mode turn off the computer and turn off the printer Turn the printer back on make sure it is online and then turn the computer back on Try printing another file For example you could create and attempt to print a short test file using Notepad If a Notepad file prints correctly the problem may be in your original file If you cannot resolve the problem contact the printer s manufacturer The printer will not print what you see on the screen Many applications display information on the screen differently from the way they print it See if your application has a print preview mode This mode lets you see your work exactly as it will print Contact the software manufacturer for more information Wireless networking p
108. ideo in compliance with the above standards Video Standards and or 11 decode AVC VC 1 and MPEG 4 Part 2 Visual that was encoded by a consumer engaged in personal and non commercial activity or was obtained from a video provider licensed to provide such video None of the licenses extend to any other product regardless of whether such product is included with this product in a single article No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA LLC See www mpegla com 18 Computer Recycling Information As part of a commitment to people and the future Toshiba promotes the efficient use of resources by working to achieve our zero waste to landfill goal at all our production sites In addition to our existing waste reduction and recycling policies Toshiba is strongly committed to reducing electronic waste In order to ensure efficient use of resources and appropriate treatment of hazardous substances in accordance with recycling regulations in each state country and territory Toshiba wants to make it easy for customers to recycle products at the end of the life cycle To learn more about Toshiba s sustainability commitment visit us toshiba com green Reuse Donation Recycling Functional computers can be donated to a local charity or resold easily through a Toshiba branded program Non working Toshiba computers can be mailed back for free recycling For addition
109. indow appears TOSHIBA o X eco Mode EE o 2S eco level aaa a ama F d eco Utility Power plan ero Display brightness oO Turn off draglay Level 20 2 Minhas inmed trighness E Dim display after s Lewel 0 1 minute eco Moke Ss Tuan off hard diese Lo Pul computer to sheep i 3 minutes 5minutes Current power consumption amp W Sample Image eco Utility window 4 To activate the eco power plan select eco Mode on the left side 5 Click the eco Mode button 6 Click Close For more information on the eco power plan and utility click the Help button at the bottom of the window 1 1 O Utilities Setting passwords Setting passwords Setting a password lets you walk away from your computer while providing additional protection for your files When you set a password you must enter the password before you can work on your computer again TOSHIBA supports different types of passwords on your computer A supervisor password Prohibits unauthorized users from accessing certain functions such as System Settings This is useful if more than one person uses the computer A user password Prevents unauthorized users from starting the computer When setting up passwords keep the following in mind The supervisor password must be set before the user password or the user password must be deleted and then re entered after the supervisor password is set
110. inish and then Yes to begin the system restore Your Windows operating system configuration will now be restored to the state it was in when the chosen restore point was created and then the computer will be automatically restarted lf Something Goes Wrong 1 D Develop good computing habits Backing up your data or your entire computer with the Windows operating system The most valuable component of your computer system is the data you create and store on its internal storage drive Since problems with either hardware or software can make the data inaccessible or even destroy it the next most valuable component of your computer system may be a recent backup of your data Fortunately the Windows operating system offers a convenient way to back up your computer or just your important files to optical disc drives or hard drives An external hard drive is recommended in case the internal storage drive fails No additional software is required Most of the optical disc drives built into recent Toshiba portable computer models can write to or burn as well as read from optical discs External optical disc writers are also widely available Follow these steps to back up your computer or files to optical discs or a storage drive NOTE You cannot back up the computer while running on battery power Connect the AC adaptor before continuing 1 From the Start screen type Control Click Control Panel from the list that
111. ion Check i your application documentation for specific instructions on right clicking Sample Illustration Click the secondary right hand control button Sample Illustration Tap twice to open Scroll vertically Slide your finger along the right edge of the touch pad in the direction you want to scroll Repeat to scroll a longer distance Sample Illustration Vertical scrolling active area Scroll horizontally Slide your finger along the bottom edge of the touch pad in the direction you want to qnar cu scroll Repeat to scroll a longer distance R Sample Illustration Horizontal scrolling active area 66 Getting Started Using the touch pad To Do the following Example Zoom in out To Zoom in lt Place two fingers close together on the touch pad and then slide them apart Sample Illustration Zooming in To zoom out Place two fingers slightly apart on the touch pad and then slide them together Sample Illustration Zooming out Adjusting touch pad settings While you are typing the on screen pointer may seem to move or jump around by itself to random locations on the screen The on screen pointer may also seem to automatically select text click buttons and activate other user interface elements For help with these problems try one or more of the following Try adjusting your typing technique to avoid accidental contact with the touch pad
112. ion Inserting the battery 3 Slide the battery release lock to the locked position Sample Illustration Locking the battery release lock 4 Turn the computer right side up 5 Reconnect any cables that were removed in step 3 of Removing the battery from the computer on page 94 6 Restart the computer Mobile Computing O Taking care of your battery Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life Safety precautions If the battery pack produces an odor overheats or changes color or shape while it is being used or charged turn off the computer s power immediately and disconnect the power cord cable from the power socket Carefully remove the battery pack from the computer Do not try to disassemble a battery pack Do not overcharge or reverse charge a battery Overcharging will shorten its life and reverse charging could damage it Avoid touching the metal terminals of the battery with another metal object Short circuiting the battery can cause it to overheat and may cause damage to the battery or the computer Do not incinerate a spent battery as this could cause it to explode and release caustic liquid If a battery is leaking or damaged replace it immediately Use protective gloves when handling a damaged battery To replace the main battery use an identical battery that you can purchase through the Toshiba Web
113. ions four times On the fourth change the region will be locked in That is the drive will only play DVDs from that last region Note that changing from region 1 to region 2 and back to region 1 is counted as two changes Learning the Basics Using the optical disc drive CO NOTE For optimum DVD performance it is recommended that you play DVDs while running the computer on AC power NOTE When viewing DVD movies use the DVD Player software that came with your computer Optical disc drive components The optical disc drive is located on the side of the computer Your optical disc drive may look like this DVD a Cc Drive in use indicator light Eject button Manual eject hole Sample Illustration Optical disc drive ASE Drive in use indicator light Indicates when the drive is in use Eject button Press to release the disc tray CAUTION Do not press the eject button or turn off the computer while the drive in use indicator light is glowing Doing so could damage the disc or the drive When the disc tray is open be careful not to touch the lens or the area around It Doing so could cause the drive to malfunction Manual eject hole Use if you need to release the disc tray when the power is off Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole Never use a pencil to press the manual eject button Pencil lead can bre
114. is almost completely discharged Leave the power connected and the battery should begin charging after a few minutes HINT Once the battery is fully charged we recommend that you periodically operate your computer on battery power until the battery discharges completely CAUTION Please make a complete back up of your data to external media before discharging the battery For more information see Backing up your work on page 78 Charging the RTC battery Your computer has an internal real time clock RTC battery The RTC battery powers the System Time Clock and BIOS memory used to store your computer s configuration settings When fully charged it maintains this information for up to a month when the computer is powered off The RTC battery may have become completely discharged while your computer was shipped resulting in a CMOS error message during startup The error message may vary by computer model NOTE Depending on your system the RTC battery may only charge while the computer is turned on To recharge the RTC battery plug the computer into a live electrical outlet and leave the computer powered on for 24 hours NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on If the RTC battery is low the real time clock and calendar may display the incorrect time and date or stop working When Hibernation mode is enabled and the RTC battery is comp
115. is minimized The antenna s used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer s instructions as described in the user documentation that comes with the product This device complies with the following radio frequency and safety standards Canada Industry Canada IC This device complies with RSS 210 of Industry Canada CAUTION he installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population consult Safety Code 6 obtainable from Health Canada s Web site www hc sc gc ca rpb The RF device shall not be co located with any other transmitter that has not been tested with this device Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device L utilisation de ce dispositif est soumis aux deux conditions suivantes 1 il ne doit pas produire de brouillage et 2 l utilisateur du dispositif doit tre pr t a accepter tout brouillage radio lectrique re u m me s il est susceptible de compromettre son fonctionnement The term IC before t
116. iversal Serial Bus URL Uniform Resource Locator WAN Wide Area Network WWW World Wide Web Terms The following terms may appear in this User s Guide A active matrix display A liquid crystal display LCD made from an array of liquid crystal cells using active matrix technology Also known as a TFT display in its simplest form there is one thin film transistor TFT for each cell This type of display works well with computers because of its shallow depth and high quality color Active matrix displays are viewable from wider angles than most passive matrix displays adapter A device that provides a compatible connection between two units For example the computer s internal display adapter receives information from the software and translates it into images on the screen An adapter can take a number of forms from a microprocessor to a simple connector An intelligent adapter one that is capable of doing some processing may also be called a controller Alternating Current AC The type of power usually supplied to residential and commercial wall outlets AC reverses its direction at regular intervals Compare Direct Current DC application A computer program that you use to perform tasks of a specific type Applications include word processors spreadsheets and database management systems See also program 166 Glossary backup A copy of a file usually on a removable disk kept in case the original file
117. ize and computer to manage power Change settings that are currently unavailable Balanced Active v E Battery Critical battery action Low battery level E Critical battery level On battery 5 Plugged in 5 Low battery notification Low battery action Reserve battery level Restore plan defaults ok Cancel Sample Image Advanced settings tab of Power Options screen 6 Configure the alarm settings to suit your needs Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors such as How the computer is configured How much you use the internal storage drive or other optional devices Where you are working since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery Enable Sleep or Hibernation which saves power when you turn off the computer and turn it back on again Use the Windows power saving option plans These power saving options control the way in which the computer is configured By using them you can increase the length of time you can use the computer before you need to recharge the battery 902 Mobile Computing Monitoring main battery power Microsoft has combined these options into preset Power Plans Using one of these power plans lets you choose between maximum power
118. keyboard it should be centered in front of you The keyboard and pointing device should be close to your elbow level The keyboard should be flat so that your wrists are straight when typing However if the notebook is on a work surface that is above your elbow height you may need to slope the notebook to keep your wrists straight Work with relaxed shoulders When typing keep your wrists straight and try not to rest your wrists on the notebook Support your arms on your forearm area The forearms can be supported by the chair arm supports or the desk surface The notebook display should be tilted so that the image on the screen is clear 32 Getting Started Selecting a place to work gt Avoid glare position the notebook so that light sources lamps or windows do not shine or reflect directly into your eyes Place the notebook display away from bright light sources or reduce the light intensity from windows by using blinds Glare on the notebook display may cause eye strain eye fatigue or headaches gt Certain notebook displays have a brightness approaching that of a TV device We recommend that you adjust the brightness of your notebook display to a comfortable level to prevent possible eye strain gt Keep your head level facing forward and balanced over your torso Adjust the font size of text on your screen to make viewing comfortable Rest your eyes periodically by f
119. l Doing so will automatically delete all collected information from the internal storage drive The PC Health Monitor software does not extend or modify TOSHIBA s obligations under its standard limited warranty in any way TOSHIBA s standard limited warranty terms and limitations apply 1 20 Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out of box state if necessary For detailed information on using the utility to create recovery media see Creating recovery media on page 55 Service Station The Service Station helps you keep your new computer running at its best by notifying you when updated software firmware documentation or other information is available for your computer The Service Station will alert you when updates are available and you can then choose to install the updates if you wish Utilities TOSHIBA Application Installer 1 2I TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer To reinstall drivers and applications 1 To access TOSHIBA Application Installer from the Start screen begin typing Application Installer or while in the Desktop screen double click the Desktop Assist icon Click Support amp Recovery Click TOSHIBA Application Installer
120. lectric shock possibly resulting in serious injury Be careful if you use a multiple connector An overload on one socket could cause a fire or electric shock possibly resulting in serious injury Getting Started 39 Connecting to a power source WARNING Always use the TOSHIBA AC adaptor that was provided with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor AC adaptor To connect AC power to the computer 1 Connect the power cord cable to the AC adaptor gt S a se Sample Illustration Connecting the power cord cable to the AC adaptor AWARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling 40 Getting Started Connecting to a power source O OC 2 Plug the AC adaptor cord into the DC IN on the side of the computer Sample Illustration Connecting the AC adaptor cord to the computer 3 Connect the power cord cable to a live electrical outlet P The AC power light on the indicator panel glows white AWARNING Never attempt to connect or disconnect a power plug with wet hands Failur
121. letely discharged a warning prompts you to reset the real time clock 88 Mobile Computing Monitoring main battery power The computer can be used while the RTC battery is being charged although the charging status of the RTC battery cannot be monitored Monitoring main battery power d The computer s main battery light gives you an indication of the main battery s current charge Glows amber while the main battery is being charged AC adaptor connected Glows white when the main battery is fully charged NOTE Battery life and charge time may vary depending upon power management settings applications and features used Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE If the AC power light flashes amber during charging either a battery pack is malfunctioning or it is not receiving correct input from the AC power supply Disconnect the AC power cord cable and remove the battery pack see Changing the main battery on page 94 for information on replacing the main battery Mobile Computing 89 Monitoring main battery power HINT Be careful not to confuse the battery light 4 the ON OFF light C and the power button light near the upper right corner of the keyboard When the ON OFF light or power button light flashes amber it indicates that the system is suspended using the Windows operating system
122. lick the Shut down option The computer closes all open applications shuts down the operating system and then turns off lf Something Goes Wrong 1 3 Power and the batteries 5 Check for the error again 6 If the error recurs remove the memory module entirely and check for the error again If removing the memory module eliminates the error the memory module may be faulty If the error recurs without the memory module installed the error is not caused by the memory module NOTE For this model Slot A is the bottom slot Slot B is the top slot If only one memory module is to be installed it must be installed in Slot A G TECHNICAL NOTE You must have at least one memory module installed for the computer to work 2 Power and the batteries Your computer receives its power through the AC adaptor and power cord cable or from the system batteries battery and real time clock RTC battery Power problems are interrelated For example a faulty AC adaptor or power cord cable will neither power the computer nor recharge the batteries Here are some typical problems and how to solve them The AC power light does not come on when you plug in the AC adaptor and power cord cable Make sure the AC adaptor and power cord cable are firmly plugged into both the wall outlet and the computer If the AC power light still does not come on check that the wall outlet is working properly by plugging in a lamp or othe
123. list of charms Search Share Start Devices and Settings Search Charm This Charm allows you to search for most anything you need to locate on your computer It can help you find apps documents photos and your favorite music ke Share Charm This Charm allows you to share music and photos with your favorite social Web sites Start Charm This Charm allows you to view all of the available apps downloaded to your system Devices Charm This Charm allows you to manage your hardware devices Settings Charm This Charm allows you to manage your system settings ft a we 1 02 Exploring Your Computer s Features Exploring the desktop Tiles Tiles can be accessed and launched from the Start screen Typical Start screen tiles are the Desktop tile and Mail tile as well as tiles representing all other applications downloaded to your system Exploring the desktop You can use its features to start applications find documents set up system components and perform most other computing tasks HINT The illustrated examples in this guide may appear slightly different from the screens displayed by your system The differences are not significant and do not indicate any change in the functionality of your system Finding your way around the desktop Your computer s desktop includes several standard features icons taskbar notification area notifications and background pattern inp te
124. lity audio and video signal via a single cable in digital format providing better picture quality than analog signal HDMI CEC HDMI Consumer Electronics Control One A V component can control another while using this function if connected with HDMI cables See also HDMI Hibernation A feature of many Toshiba computers that saves to the internal storage drive the current state of your work including all open files and programs when you turn the computer off When you turn on the computer again your work is returned to the same state it was when the computer was turned off See also Sleep Suspend hot swapping The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change icon A small image displayed on the screen that represents a function file or program interlaced A method of refreshing a computer screen in which only every other line of pixels is refreshed Interlaced monitors take two passes to create a complete screen image Compare non interlaced internal device See device Internet The decentralized world wide network of computers that provides electronic mail the World Wide Web and other services See also World Wide Web keyboard shortcut A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse L1 level one cache Memory cache built into the processor t
125. m from your recovery media Also if your original internal storage drive fails you can restore your system to a new internal storage drive from your recovery media It is strongly recommended that you create recovery media before using your system for the first time See Creating recovery media on page 55 and Restoring from recovery media on page 57 Getting Started DH Recovering the Internal Storage Drive NOTE s During the recovery process your computer must be connected to an external power source via the AC adaptor s When you restore your system only the operating system files applications and drivers originally shipped with the computer are restored Any files that you created are not restored during this process Be sure to separately save the files you have created to external media using Windows or another backup program For more information see Backing up your work on page 8 Creating recovery media It is strongly recommended that you create recovery media If the recovery files on your internal storage drive become corrupted or are deleted you can restore your system from your recovery media Also if your original internal storage drive fails you can restore your system to a new internal storage drive from your recovery media NOTE During the recovery process your computer must be connected to an external power source via the AC adaptor NOTE When you create recovery media o
126. make of keyboard Display problems Here are some typical display problems and their solutions The screen is blank Display Auto Off may have gone into effect Press any key to activate the screen If you are using the built in screen make sure the display priority is not set for an external monitor To do this press F4 If this does not correct the problem press F4 again to return the display priority to its previous setting HINT Pressing the F4 key several times will advance you through the E display options If you are using an external monitor Check that the monitor is turned on Check that the monitor s power cord cable is firmly plugged into a working power outlet Check that the cable connecting the external monitor to the computer is firmly attached Try adjusting the contrast and brightness controls on the external monitor Press F4 to make sure the display priority is not set for the built in screen The screen does not look correct You can change the display settings by clicking a blank area of the desktop with the secondary control button then clicking Personalize This opens the Personalization window Choose a theme for your desktop background under Colors Sounds and Screen Saver or change the settings for each of these components individually Click Display and then Change display settings to choose the screen resolution For more information see the Windows onli
127. ment Allows drivers containing improper signatures to be installed Disable early launch anti malware protection Allows drivers to initialize without being measured by the Anti malware driver Disable automatic restart on system failure Prevents Windows from automatically restarting if an error causes it to fail Choose this option only if Windows is stuck in a loop where it fails attempts to restart and fails again repeatedly Internet problems My Internet connection is very slow Many factors contribute to the speed with which you can surf the Internet They include network speed network conditions time of day when everyone else is surfing your access can be slow and popularity of the sites you are trying to access If accessing a particular site is very slow try later My browser cannot find the URL address I typed in Make sure you separated the domain names of the address with the forward slash Check the spelling of each name and the syntax of the address carefully A single incorrect letter or missed character will make it impossible for your browser to locate the site My browser cannot find a site I bookmarked The World Wide Web is constantly changing A site you bookmarked yesterday may not be available today or its server may be down for temporary repair Try again later lf Something Goes Wrong 1 35 Fixing a problem with Device Manager The Windows operating system can help you If the
128. mputer for the first time Follow the on screen instructions on each screen in order to properly install the operating system and begin using your computer Setting up your software CAUTION When you turn on the computer for the first time do not turn off the power again until the operating system has loaded completely NOTE The names of windows displayed and the order in which windows appear may vary according to your software setup choices The first time you turn on your computer the setup guides you through steps to set up your software Follow the on screen instructions Registering your computer with Toshiba Product registration is strongly recommended and allows Toshiba to send you periodic updates announcements and special offers applicable to your Product Product registration can be completed by one of three methods 1 From the Toshiba Web site at register toshiba com Type in the requested information and complete the registration process 2 From the Start screen Type Registration while in the Start screen locate and complete the registration process 3 From the Desktop On the Desktop move the pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search fg Charm and in the Search field type Registration In the list that appears click Registration and complete the registration process Failure to complete Product Registration will not dimi
129. n see Power Plans on page 92 The eco Utility monitors your power savings from using the eco power plan by tracking real time power consumption and accumulated savings over time To learn how to access the utility see eco Utility on page 115 For more information on the eco power plan see the Help file in the eco Utility window 904 Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power you have two options plug in the AC adaptor or install a charged main battery WARNING Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object This could cause serious injury or fire and could also damage the battery pack and computer Never expose a battery pack to abnormal shock vibration or pressure The battery pack s internal protective device could fail causing It to overheat or ignite resulting in caustic liquid leakage or explosion or fire possibly resulting in death or serious injury TECHNICAL NOTE To avoid losing any data save your files and then either completely shut down your computer or put it into Hibernation mode before changing the main battery L Removing the battery from the computer To remove the battery 1 Save your work 2 Turn off the computer see To Shut down your computer on page 43 3 Unplug and remo
130. nd that the driver is loaded To access the Device Manager from the Start screen begin typing Computer or if you are in the Desktop screen move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search p Charm and then type Computer Click Control Panel System and Security and then System Carefully note any error messages these will be very helpful if you should confer with a support technician at a later time NOTE e SeS To enable or disable wireless communication use the F12 key For more information see TOSHIBA Function Keys on page 156 Use IPCONFIG to verify that the computer has a useful IP address one other than the private address of 169 254 xxx xxx assigned by Windows 1 From the Start screen type Cmd 2 Click Command Prompt 3 Enter IPCONFIG ALL and then press ENTER The IP address for each active network adapter will be displayed Connect your computer directly to your router or broadband modem by plugging a standard CATS Ethernet patch cable sold separately into your computer s RJ45 Ethernet port If your connection problem disappears the problem lies in the Wi Fi part of your network If you have enabled any security provisions closed system MAC address filtering Wired Equivalent Privacy WEP etc check the access point vendor s Web site for recent firmware upgrades Problems with WEP keys in particular a
131. ne Help 1 40 lf Something Goes Wrong Display problems A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware Reduce the size of the color palette to one that is supported by the computer s internal display To change the display properties 1 Right click in a blank area of the Windows desktop 2 Click Personalize and then Display 3 Use the menu on the right hand side of the page to Adjust resolution Adjust brightness Calibrate color Change display settings Project to a second screen Adjust Clear Type text 4 Click OK The display mode is set to Simultaneous and the external display device does not work Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher Devices that do not support this resolution will only work in Internal External mode and not simultaneous mode Small bright dots appear on your TFT display when you turn on your computer Small bright dots may appear on your screen display when you turn on your computer Your display contains an extremely large number of thin film transistors TFT and is manufactured using high precision technology Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology Over a period of time and depending on the usage of the computer the
132. nish your rights under the Toshiba Standard Limited Warranty NOTE To register online an Internet connection is required Getting Started 43 To Shut down your computer To Shut down your computer 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings R3 Charm CAUTION Pressing the power button before shutting down the Windows operating system could cause you to lose your work Make sure the system indicator panels storage drive light and the drive in use light are off If you turn off the power while a disk disc is being accessed you may lose data or damage the disk disc and or drive 3 In the lower right of the screen click the Power f icon Shut down option x Shut down GYEI Restart Power button a Notifications Power Keyboard Sample Image Shut down 4 Highlight Shut down while holding the Shift key and then click the Shut down option The computer closes all open applications shuts down the operating system and then turns off To Restart your computer 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings R3 Charm 4 4 Getting Started To place your computer in Sleep mode 3 Inthe lower right of the screen click the Power f icon Sleep x Shut d
133. nly the operating system files applications and drivers originally shipped with the computer are backed up to the external media and can be restored from this media Any files that you created are not backed up on the recovery media You will need to separately back up the files you created for more information see Backing up your work on page 78 When you create recovery media the system will prompt you to insert several blank DVDs or connect one or more USB flash drives of a certain minimum capacity to your computer The amount of space required for storing the recovery files varies by computer model Follow the procedure below to determine how much space you will need for storing your system s recovery files To create recovery media 1 From the Start screen begin typing Recovery Media Creator and click your selection or if you are in the Desktop move your pointer over the upper or lower right corner of the screen When the Windows Charms appear click the Search p9 56 Getting Started Recovering the Internal Storage Drive Charm and in the Search field type Recovery Media Creator In the list that above click your selection The TOSHIBA Recovery Media Creator dialog box displays TOSHIBA Create Recovery Media A recovery image of your computer is stored on the hard disk drive You can create recovery media from this image by using the TOSHIBA Recovery Media d b Creator Media Selection Title Media
134. nology on board airplanes or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment CAUTION Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits Nevertheless the B uetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized Regulatory statements This product complies with any mandatory product specification in any country region where the product is sold In addition the product complies with the following 15 Taiwan Unless approved for any model accredited low power radio frequency electric machinery any company trader or user shall not change the frequency increase the power or change the features and functions of the original design Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications In the event interference is caused the use of such electric machinery shall be immediately discontinued Operation of such products can
135. nsferring large files executable file A computer program that is ready to run Application programs and batch files are examples of executable files Names of executable files usually end with a bat or exe extension expansion device A device that connects to a computer to expand its capabilities Other names for an expansion device are port expander port replicator docking station or network adapter extension See file extension external device See device 1 10 Glossary F file A collection of related information saved on disk with a unique name A file may be a program information used by a program or a document See also document File Allocation Table FAT The section of a storage drive that keeps track of the location of stored files file name A set of characters that uniquely identifies a file within a particular folder It consists of two parts the actual name and the file name extension See also file extension file extension The three characters following the period pronounced dot at the end of a file name The extension indicates the type of file Examples are exe for program files and hlp for help files See also file name folder Also called directory A container for organizing files saved to a disk A folder is symbolized on screen by a graphical image icon of a file folder A folder can contain files and other folders format verb To prepare a blank disk for use wit
136. o follow Bande de fr quence restreinte seuls les canaux 1 7 2400 et 2454 MHz respectivement doivent tre utilis s endroits ext rieur en France Vous pouvez contacter I Autorit de R gulation des T l communications http www art telecom fr pour la proc dure a suivre allowed E necessaria la concessione ministeriale anche per l uso interno a Verificare con i rivenditori la procedura da seguire procedure to follow eekanna aa ST met verkoper voor juiste procedure Europe Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150 5250 MHz 5250 5350 MHz 5470 5725 MHz Countries Channels 36 40 44 Channels 52 56 60 Channels 100 104 108 112 48 64 116 120 124 128 132 136 140 Indoor Only Indoor A Indoor Outdoor e France Switzerland Liechtenstein European Community 5150 5250 MHz 5250 5350 MHz 5470 5725 MHz Countries Channels 36 40 44 Channels 52 56 60 Channels 100 104 108 112 48 64 116 120 124 128 132 136 140 Indoor Only Indoor Only Indoor Outdoor Denmark Finland Germany Greece Ireland Italy Luxembourg Netherlands Norway Portugal Sweden UK O allowed x forbidden To remain in conformance with European spectrum usage laws for Wireless LAN operation the above 2 4 GHz and 5 GHz channel limitations apply The user should use the wireless LAN utility to check the current channel of operation
137. o help improve processing speed See also cache CPU cache L2 cache L2 level two cache Memory cache installed on the motherboard to help improve processing speed It is slower than L1 cache and faster than main memory See also cache CPU cache LI cache 1 2 Glossary LAN Local Area Network A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network LED Light Emitting Diode A solid state lamp SSL that uses light emitting diodes LEDs as the source of light which offers long life and high efficiency output Multiple diodes are used together since the light created by individual light emitting diodes is small compared to incandescent and compact fluorescent lamps LCD Liquid Crystal Display A type of display that uses a liquid substance between two transparent electrode panels When an electric current passes through the electrodes the molecules in the liquid form a crystalline pattern that polarizes the light passing through it A filter over the electrodes permits only non polarized light to pass to the surface of the display creating light and dark pixels load To move information from a storage device such as a hard disk into memory for processing local area network See LAN logical drive A section of a disk that is recognized by the operating system as a separate disk d
138. o highlight or otherwise specify text data or graphics with the intent to perform some operation on it shortcut See keyboard shortcut Sleep A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again software See program Compare hardware solid state drive A data storage device that utilizes solid state memory as opposed to a hard disk see also hard disk Solid state drives hold a large amount of information and are used for storage of programs and data Start screen Displays the new Windows operating system look and feel 1 6 Glossary Suspend A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again Swipe Swipe an open window to the left or right of the screen to display the next or previous window system prompt The symbol in the MS DOS operating system generally a drive letter followed by a greater than sign indicating where users are to enter commands TFT display See active matrix display Tile Tiles A list of square or rectangular icons on the Start screen representing applications that can be accessed by selecting them Universal Serial Bus USB USB is a serial bus that supports data tr
139. ocusing on objects that are farther away Using the notebook with an external keyboard mouse or monitor Top of monitor screen at _ eye level or slightly below eye level lt Keep your head level facing forward Keep your keyboard centered in front of you and close to elbow level Use a light touch on keyboard and keep your wrists straight when typing 4 Relax your shoulders T Adjust the chair back to provide comfortable back Keep backs of your knees support slightly away from chair to avoid pressure points behind the knee or under the thigh Keep your thighs evenly supported by the seat approximately parallel to the floor Rest your feet flat on floor or footrest Z BSS Sample Illustration Correct posture When using a notebook for long hours it may be more comfortable to dock the notebook and use an external keyboard mouse and monitor The keyboard and mouse or trackball should be close to your elbow level gt The mouse should be next to the keyboard to avoid a reach If you have to reach the arm should be supported in the forearm area by the desk surface or the chair arm supports Getting Started 33 Selecting a place to work Alternative keyboards such as the split curved keyboard may improve shoulder and arm comfort Select a mouse that is comfortable for you to use Don t rest your wris
140. oderate injury CAUTION Indicates a potentially hazardous situation which if not avoided may result in property damage NOTE Provides important information Other icons used Additional icons highlight other helpful or educational information Vz he ys HINT This icon indicates helpful hints and tips Ce TECHNICAL NOTE This icon indicates technical information about the computer DEFINITION This icon indicates the definition of a term used in the text as Introduction 29 Other documentation Your computer s features and specifications Certain computer chassis are designed to accommodate all possible configurations for an entire product Series Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis unless you have selected all those features This information applies to all the features and icons described in this guide Below are examples of some of the many possible icons used on your computer oO p CS Sample Illustration System icons Other documentation Your computer comes with the following documentation An electronic version of the User s Guide this document A Quick Start document It may also contain guides for other applications that may come with your system For accessory information visit Toshiba s Web site at accessories toshiba com Service option
141. oks you can use to supplement the information in the manuals Data and system configuration backup in the Windows operating system The Windows operating system offers some easy to use features for backing up your Windows settings and your data documents and other important files Take advantage of these features to protect yourself from much more difficult and time consuming restoration procedures and to safeguard your valuable data from loss Saving system configuration with restore points The System Restore feature of the Windows operating system quickly creates restore points snapshots of your Windows operating system configuration and saves them for later recall If you experience problems after installing some new hardware or software you can easily select a previously established Control Point to turn back the clock restoring the Windows operating system to the state it was in just prior to the installation This is much easier and more effective than uninstalling the hardware or software which often leaves behind unwanted files and settings It is also easy to undo a restore point selection if you change your mind Follow these steps to create a restore point using the System Restore utility 1 From the Start screen type Control Click Control Panel from the list that appears Click System and Security and then System In the left pane click System Protection The System Protection tab of
142. omputer Grease or dust on the connector may cause memory access problems 11 Carefully remove the new memory module from its antistatic packaging without touching its connector 12 Locate an empty memory module slot on the underside of the computer NOTE If no memory slot is available you must remove a module by performing steps 2 3 of Removing a memory module on page 51 NOTE If your system has the memory modules stacked on top of one another you must remove the top module first before removing installing the bottom module NOTE For this model Slot A is the bottom slot Slot B is the top slot If only one memory module is to be installed it must be installed in Slot A Getting Started 49 Adding memory optional 13 Pick up the memory module by its sides avoiding any contact with its connector Position the module toward the socket aligning the connector s notch with the matching key in the socket connector latch Sample Illustration Aligning the memory module with the socket 14 Firmly press the memory module into the memory slot s socket at approximately a 30 degree angle to the horizontal surface of the computer Sample Illustration Inserting the memory module into the socket 15 Once the module s connector is fully inserted into the socket press downward on the top edge of the module to seat the module into the latches at the sides of the socket These latches should sn
143. omputer eccccccccccen 43 To Restart your Computer scce 43 To place your computer in Sleep mode 0 44 Adding optional external devices 45 Adding memory optional ccceeceseeeeeeeeees 45 Installing a memory module cecce 45 Removing a memory mModule ccc eee 5 Checking total Memory ccce 53 Recovering the Internal Storage Drive 00 54 Creating recovery media cece eee eeeeeen 55 Restoring from recovery media 57 Refresh your PC with users data 08 Reset your PG esssiscrornraiocesandustbnesandionseisesseaceianecs 60 Installing drivers and applications 63 Using the touch ad ccccceccessseesesseeeeeeseeeen 64 Adjusting touch pad settings ceeee 66 Disabling or enabling the touch pad 6 Connecting an external device 67 Using external display devices scs 67 Selecting video cables 68 Connecting an HDMI compatible television or display device ccceeeeeee 68 Connecting an external monitor or projector 68 Directing the display output when you turn ON The computer eccerre 69 Adjusting the quality of the external display 70 Customizing your computer s settings 0 000 70 Contents 21 Caring for your COoMpUter cees 70 Cleaning the COMPUTE eeen 71 Moving the COMPUTEL c ccc eeeceesseeeeeeeeees 71 Using a Computer lOCK ccc eecceeeeecesseeeeeees 71 Chapter 2
144. ouching the surface of the disc Grasp it by its center hole and edge If you handle the disc incorrectly you could damage the disc and possibly lose data Scan all new files for viruses This precaution is especially important for files you receive via email or download from the Internet Occasionally even new applications you buy from a supplier may contain a computer virus You need a special application to check for viruses Important information on your computer s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer WARNING Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet even if your computer is in Sleep mode In this condition observe the following Never cover your computer or AC adaptor with any object Never place your computer or AC adaptor near a heat source such as an electric blanket or heater Never cover or block the air vents including those located at the underside of the computer e Always operate your computer on a hard flat surface Using your computer on a carpet or other soft material can block the vents located at the underside of the computer Overheating your computer or AC adaptor could cause system failure computer or AC adaptor damage or a fire possibly resulting in Serious injury gt
145. own Restart option Available Power button Notifications Power Keyboard Sample Image Restart 4 Highlight Restart and then click the Restart option The computer closes all open applications and restarts the operating system To place your computer in Sleep mode 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings R3 Charm If you power down using the Sleep command and the battery discharges fully your unsaved information will be lost Be sure to Save your work first 3 In the lower right of the screen click the Power f icon a5 Sleep option Shut down PVC Restart Power button a Notifications Power Keyboard Sample Image Sleep 4 Highlight Sleep and then click the Sleep option Sleep mode saves the current state of the computer to memory so that when you restart the computer you can continue working from where you left off Getting Started 45 Adding optional external devices Adding optional external devices NOTE Before adding external devices or memory Toshiba recommends setting up your software See Setting up your software on page 42 After starting your computer for the first time you may want to Add more memory see Adding memory optional on page 45 Connecting external devices see Connecting an external device on page 67
146. port toshiba com Contacting Toshiba Toshiba s Technical Support Web site For technical support or to stay current on the most recent software and hardware options for your computer and for other product information be sure to regularly check the Toshiba Web site at support toshiba com Other Toshiba Internet Web sites toshiba com Worldwide Toshiba corporate site us toshiba com Marketing and product information in the USA accessories toshiba com Accessories information in the USA www toshiba ca Canada www toshiba Europe com Europe www toshiba co jp index ntm Japan latin toshiba com Mexico and all of Latin America acclaim toshiba com Toshiba USA Self Service support web site Toshiba s worldwide offices If Something Goes Wrong 159 Toshiba s worldwide offices Australia Toshiba Australia Pty Limited 84 92 Talavera Road North Ryde NSW 2113 Sydney Australia France Toshiba Syst mes France S A 7 Rue Ampere B P 131 92800 Puteaux C dex France Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041 Agrate Brianza Milano Italy Latin America and Caribbean Toshiba America Information Systems Inc 9740 Irvine Boulevard Irvine California 92618 United States Spain Toshiba Information Systems Espa a S A Parque Empresarial San Fernando Edificio Europa la Planta Escalera A 28831 Madrid San Fernando de Henares Spain United States Toshiba Am
147. press the manual eject button Pencil lead can break off inside the computer and damage It Some discs run correctly but others do not Check that the type of disc you are using is compatible with your optical disc drive For more information regarding supported optical media formats refer to the complete detail specifications for your computer at support toshiba com If the problem is with an optical data disc refer to the software s documentation and check that the hardware configuration meets the application s needs The disc will not come out of the drive when you click the eject button on the screen Press the button on the optical disc drive itself For additional information see You press the disc eject button but the drive tray does not slide out on page 143 sound system problems No sound is coming from the computer s speakers Adjust the volume control Try pressing the F11 key to see if volume mute is disabled Check that the volume control on the computer is turned up If you are using external headphones or speakers check that they are securely connected to your computer The computer emits a loud high pitched noise This is feedback between the microphone and the speakers It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud Adjust the volume control Printer problems This section lists some of the most common printer problems T
148. properly Restore points are created amp When new hardware or software is installed Manually by the user System Image Recovery Windows will Recover the Operating system using a specific image provided by the user Automatic Repair This feature automates the repair process The Operating System will automatically look for problems and repair them if possible Command Prompt The command prompt is a very powerful tool for advanced users Startup Settings In previous Operating Systems the majority of the options found on this menu were available by pressing the F8 key during the Windows boot process gt Enable low resolution video mode Restarts Windows using your current video driver at low resolution This allows you to reset your display settings in the event they have been improperly set Enable debugging mode Starts Windows in an advanced troubleshooting mode Enable boot logging Creates a file that lists all the drivers that are installed during Startup 1 3 4 lf Something Goes Wrong The Windows operating system is not working gt Sd Enable Safe Mode Starts Windows with a minimal set of drivers and services If the computer starts and runs in Safe Mode you will know the Operating System is most likely working properly and that you should look to third party applications or drivers for the source of your problem Disable driver signature enforce
149. r Plug and Play Generally refers to the computer s ability to automatically configure itself to work with peripheral devices When capitalized refers to a standard that when followed by a device manufacturer allows a computer to configure itself automatically to work with the device pointer An icon usually an arrow that moves on the screen when you slide your finger across the touch pad or move a mouse Used to point to and select activate on screen items such as icons menu items and buttons The shape and purpose of the pointer varies depending on the program you are using and what you are doing pointing device Any device such as the touch pad or a mouse that enables you to move the pointer on the screen port A socket on the computer where you plug in a cable for connection to a network or a peripheral device processor See Central Processing Unit CPU program A set of instructions that can be executed by a computer The general classes of programs also called software are operating system application and utility See also operating system application utility properties The attributes of an object or device For example the properties of a file include the file s type size and creation date R RAM Random Access Memory Volatile memory that can be written to as well as read Volatile here means that information in RAM is lost when you turn off your computer This type of memory is used
150. r appliance The AC adaptor and power cord cable work correctly but the battery will not charge The battery does not charge while the computer is consuming full power Try turning off the computer The battery may not be inserted correctly in the computer Turn off the computer remove the battery clean the contacts with a soft dry cloth if necessary and replace the battery See Removing the battery from the computer on page 94 The battery may be too hot or too cold to charge properly If you think this is the probable cause let the battery reach room temperature and try again 1 3 8 lf Something Goes Wrong Keyboard problems If the battery has completely discharged it will not begin charging immediately Leave the AC adaptor and power cord cable connected wait 20 minutes and see if the battery is charging If the battery light is glowing after 20 minutes let the computer continue charging the battery for at least another 20 minutes before you turn on the computer If the battery light does not glow after 20 minutes the battery may have reached the end of its useful life Try replacing it The battery appears not to power the computer for as long as it usually does If you frequently repeat shallow charge and discharge the battery meter may become inaccurate Let the battery discharge completely then try charging it again Check the power options via your Power Plans see Power Plans on page 92 Hav
151. rd reader supports the use of Secure Digital SD Mini SD Micro SD SDHC SDXC or MultiMediaCard MMC media These media can be used with a variety of digital products digital music players cellular phones PDAs digital cameras digital video camcorders etc CAUTION To usea micro or mini SD Card an SD adapter is required The Memory card reader may also support other types of media NOTE Do not use the Copy Disk function for this type of media To copy data from one media to another use the drag and drop feature of the Windows operating system Inserting memory media NOTE To locate your Memory card reader please refer to your Quick Start document The following instructions apply to all types of supported media devices 1 Turn the media so that the contacts metal areas are face down 2 Push the media into the adapter until it locks in place y Sample Illustration Inserting memory media Exploring Your Computer s Features 1 09 Using the Memory card reader When inserting memory media do not touch the metal contacts You could expose the storage area to static electricity which can destroy data Removing memory media to n N io LS Un If you are not currently on the Desktop choose the Desktop tile on the Start screen otherwise skip to step 2 Prepare the card for removal by clicking on the Show hidden icons button a if necessary
152. re frequently addressed in new firmware releases lf Something Goes Wrong 1 A DVD operating problems The Windows operating system wireless management utility does not work If you are using an external Wi Fi adapter a USB adapter or other variety check if the adapter comes with its own management utility If it does the utility may be disabling the Windows operating system wireless management utility in which case you must use the adapter s management utility If the documentation that accompanies the adapter does not provide enough information to determine if this is the case contact that vendor s support group for further advice DVD operating problems If you experience a problem playing DVDs you may be able to fix the problem yourself For general problems playing a DVD title try the following steps 1 Verify that the disc is in a format that the drive supports 2 Ensure that the disc is properly inserted in the drive tray 3 Use the DVD Player software that came with your computer to view DVD movies 4 Clean the disc and try again A dirty drive can also cause audio problems If you have tried several discs and all fail consider sending your drive to an authorized service provider to get it cleaned 5 From the Start screen type Computer Click Computer from the list that appears The optical disc drive should appear in the list 6 See Checking device properties on page 135 for instructions on
153. re information at once Primary control button Secondary control button Sample Illustration The touch pad and associated control buttons Refer to the table below for specific instructions on performing each operation NOTE The pointer is the icon usually an arrow that moves on the screen when you slide your finger across the touch pad or move a mouse connected to your computer To Do the following Example Move the on screen Slide your finger across the touch pad in the pointer direction you want to move the pointer gt To move the pointer a longer distance slide Tx your finger several times across the touch pad in the preferred direction Sample Illustration Pointer moves to the right Getting Started 65 Using the touch pad To Do the following Example Select an item 1 Move the pointer to the item you want to l select TN 2 Do one of the following CT Tap the touch pad once OR Press and release the primary Sample Illustration left hand control button Tap once to select Open or activatean 1 Move the pointer to the item you want to item open activate 2 Do one of the following e Tap the touch pad twice in rapid succession OR Press and release the primary contro button twice in rapid succession Right click an item 1 Move the pointer to the item you want to right click po 2 Press and release the secondary control button x This feature varies by applicat
154. rive A system s logical drives may differ from its physical drives For example a single hard disk drive may be partitioned into two or more logical drives memory Typically refers to the computer s main memory where programs are run and data is temporarily stored and processed Memory can be volatile and hold data temporarily such as RAM or it can be nonvolatile and hold data permanently such as ROM A computer s main memory is RAM See also RAM ROM microprocessor See Central Processing Unit CPU MIDI Musical Instrument Digital Interface A standard for connecting musical instruments synthesizers and computers The MIDI standard provides a way of translating music into a form computers can use and vice versa motherboard The computer s main circuit board that contains the processor memory and other primary components MS DOS prompt See system prompt Glossary 1 13 multi function drive A DVD drive that can read and write to CD and DVD media multimedia A combination of two or more media such as sound animation and video in a computer program or presentation Musical Instrument Digital Interface See MIDI network A collection of computers and associated devices that are connected by communications facilities A network allows you to share data and peripheral devices such as printers with other users and to exchange electronic mail non interlaced A method of refreshing a comput
155. roblems NOTE This section provides general troubleshooting tips for networking problems specifically wireless Wi Fi networking The terms and concepts used assume a basic understanding of networks and may be for more advanced users If you need assistance or if you are not familiar with the terminology please see Windows Help and Support or contact your computer technician If your computer is equipped with an internal Wi Fi adapter verify that Airplane mode is OFF the wireless indicator light p will be lit Verify that your computer can detect access points or routers If it can detect a Wi Fi access point or router then it may be a configuration issue Verify that signal strength is good using the utility provided with the Wi Fi adapter 146 lf Something Goes Wrong Wireless networking problems If another computer is on the same network verify that it has network access and can connect to the Internet If for example the other computer cannot browse to a public Web site the ISP s Internet Service Provider service may be disrupted Verify that the Service Set Identifier SSID or network name is correct i e that it matches the SSID assigned to the access point you are attempting to connect through SSIDs are case sensitive Check the Windows Control Panel s Device Manager to verify that the Wi Fi adapter is recognized by the Windows operating system a
156. s Toshiba offers a full line of optional service programs to complement its standard limited warranty Toshiba s standard limited warranty extended warranty and service upgrade terms and conditions are available at warranty toshiba com To stay current on the most recent software and hardware options for your computer and for other product information be sure to regularly check the Toshiba Web site at support toshiba com If you have a problem or need to contact Toshiba see If Something Goes Wrong on page 128 Chapter 1 Getting Started This chapter provides tips for using your computer effectively summarizes how to connect components and explains what to do the first time you use your computer Please read the safety instruction information on the Quick Start document that shipped with your computer carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause bodily injury property damage or damage the computer Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations Setting up a work environment 30 Place the computer on a hard flat surface that is large enough for the computer and any other items you are using such as a printer Leave enough space around the computer and other equipment to provide adequate ventilation Otherwise they may overhe
157. s only and does not apply to end users in other countries such as the United States Although the initial emphasis is in Europe Toshiba is already working with design engineers suppliers and other partners to determine appropriate worldwide product life cycle planning and end of life strategies for our products Please contact your local government for applicable laws and regulations governing the disposal of this product For information on how to trade in or recycle your product visit www reuse toshiba com VCCI Class B Information COREL PRUBRESSRESREMA eS VCCI OBE ITROCDFABIRRWNRES CT CORBIS ERATA ATE eAWELTWETA CORBMIUAPTLEVAVRIERICMELT ASHO amp VBE eS SHO TFCEMBHVET FN tRa ARS INGE DS TIELLYRRYRUELTHR SL Taiwan Unless approved for any model accredited low power radio frequency electric machinery any company trader or user shall not change the frequency increase the power or change the features and functions of the original design Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications In the event interference is caused the use of such electric machinery shall be immediately discontinued Operation of such products can be resumed only when they are modified and can no longer cause interference The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and r
158. se the software please refer to the respective Online Help menus Removing a disc with the computer off To remove a disc with the computer turned off 1 Insert a slender object such as a straightened paper clip into the manual eject hole The disc tray slides partially out of the drive Learning the Basics 83 Toshiba s online resources Never use a pencil to press the manual eject button Pencil lead can break off inside the computer and damage it 2 Pull the tray out until it is fully open remove the disc and place it in its protective cover 3 Gently press the tray in to close it Toshiba s online resources Toshiba maintains a number of online sites to which you can connect These sites provide information about Toshiba products give help with technical questions and keep you up to date with future upgrades For more information see Contacting Toshiba on page 154 Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling Toshiba s energy saver design Your computer enters a low power suspension mode when it is not being used thereby conserving energy and saving money in the process It has a number of other features that enhance its energy efficiency Many of these energy saving features have been preset by Toshiba We recommend you leave these features active allowing your computer to operate at its maximum energy efficiency so that you can
159. sesessesseeeseeneeeesereen 115 Setting passwords seieren 116 Using a supervisor PASSWOMTC cceeeeeeeee 116 Contents 23 Using a user password ccccceccesseeeeseeseeeeess 118 Deleting a user password 118 System Settings cece cccesseceseeesesseeesesseeeeesees 119 Sleep and Charge Soon 120 USB Sleep and Charge uu eee seen 120 Enabling Disabling USB Sleep and Charge 122 Power supply mode settings 122 Function Key arcassactecatiencsan nes vahstarnscencansbneneeneeascbenss 123 PC Diagnostic Tool Utility ancen 124 PC Health Monitor 125 Recovery Media Creator 126 Service Station ese cccssecceseessceseeeessseeeeesseeeeeaes 126 TOSHIBA Application Installer een 127 Chapter 6 If Something Goes Wrong se 128 Problems that are easy to fix 2 128 Problems when you turn on the computer 129 The Windows operating system is not VOIKIN eee ee re 131 Using Startup options to fix problems 132 Internet problems eee eeeeeceesseeeeeeeeeees 134 The Windows operating system can NEID VOU eiaeetcesceaebatessenetacteenhceasdecedcstachader 135 Fixing a problem with Device Manager 135 Checking device properties cccceeeeeeees 135 Memory problems ccce 136 Power and the batteries ccnn 137 Keyboard probleMS ecccccecnen 138 Display ProDleMs cccccccsscsseesssssseeeeesesseeeens 139 Disk or storage drive problemS cccceeeees 14
160. shutting down Data stored in the computer s memory has been lost Data stored in the computer s internal storage drive may not be affected Always save your data even when you are using Sleep mode If your battery fully discharges information that has not been saved will be lost Your computer can be configured to warn you when the battery is running low see What to do when the main battery runs low on page 90 If you are running on battery power it is recommended that you do not leave the computer in Sleep mode for long periods of time To charge the battery leave the computer plugged into a live wall outlet for several hours For more information see Changing the main battery on page 94 The AC power light is blinking If the AC power light is blinking try the following steps 1 Cutoff power to the computer by disconnecting the AC adaptor and removing the battery The error condition will be interrupted and the AC power light will stop flashing 2 Put the battery back into the computer Do not connect the AC adaptor Try turning the computer on again If the computer starts normally the AC adaptor may be defective and will need to be replaced If the AC power light starts flashing remove the battery and continue with the steps below 3 Connect the AC adaptor to the computer Leave the battery out of the computer Try turning the computer on again If the computer starts normally the battery may need
161. site at accessories toshiba com A reverse polarity condition should be avoided with all batteries The main battery is designed so that it cannot be installed in reverse polarity Charge the battery only in the computer or in a battery charger designated as an approved option When you install the battery pack you should hear a click when it is seated properly Do not expose the battery pack to fire The battery pack could explode 98 Mobile Computing Disposing of used batteries Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter To fully discharge your battery pack Periodically disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges If you have extra battery packs rotate their use If you will not be using the system for an extended period more than one month remove the battery pack Store spare battery packs in a cool dry place out of direct sunlight Disposing of used batteries The life of a battery pack depends on usage When the battery pack needs replacing the main battery light flashes amber shortly after you have fully recharged the battery You must discard a battery if it becomes damaged A WARNING Never attempt to dispose of a battery pack by burning or by throwing it into a fire and never allow exposure to a heating apparatus e g microwave oven He
162. ss points may be limited Your system comes with a wireless LAN module This is a technology that expands wireless communication beyond networking equipment and can connect many different kinds of electronic devices without the need for cables For information on how to set up a wireless connection refer to your wireless networking device documentation or your network administrator NOTE To enable or disable wireless communication use the F12 key For more information see TOSHIBA Function Keys on page 156 NOTE When Airplane mode is OFF the wireless indicator light amp will be lit For help with common Wi Fi networking problems see Wireless networking problems on page 145 Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports Accessing a network To access a network connect an Ethernet cable to the Network port RJ45 on your computer For specific information about connecting to the network consult your network administrator Many hotels airports and offices offer Wi Fi access 1 06 Exploring Your Computer s Features Exploring audio features Exploring audio features You can use your computer to record sounds using the computer s internal microphone available on certain models or an optional external microphone You can listen to sound files or audio CDs using the built
163. sure you follow the Good Working Posture points mentioned above while working 3 4 Getting Started Selecting a place to work Take short strategically spaced rest breaks to avoid eye strain and body fatigue For example stand up and walk around or stretch for a few minutes every hour Taking regular breaks is especially important if you are working long hours on your computer or working on a deadline If stress at work is affecting your health try to identify the sources of the stress and evaluate ways to reduce the stress Mobile computing tips When using the notebook at airports on airplanes or trains or at meetings make sure that you take the time to consider the points just mentioned When working on the road it may be difficult to set up the notebook in an optimal position In these situations it is important that you take frequent breaks and change your posture frequently to relieve the excess loads on your body Be creative when in a hotel room use a rolled up blanket or pillows to provide back support or to provide arm support To position the computer at a good height remember to operate the computer on a hard flat stable surface Using your computer on a carpet blanket or other soft materials can block the air vents including those located at the base of the computer and possibly cause overheating of your computer Transporting the notebook Although your notebook is light c
164. tents FOWE PIAN rena ae a cee onepevace 92 Using the eco power plan ocsssccscccsenererrns 93 Changing the main battery cece eee 94 Removing the battery from the computer 94 Inserting a charged battery scce 95 Taking care of your battery sccccsccccerccen 97 Safety precautions een 97 Maintaining your battery sccccccceennas 98 Disposing of used batteries 0 0 0 0 cee eeeeeseeeeees 98 TP RAVG MNO HOS secs cscmasencer state sasonedeasesaanncens eacsceptitass 99 Chapter 4 Exploring Your Computer s Features 100 Exploring the Start screen 100 GHATS sceassesacecencepsaaionsesiacecustecesnieuaconteaseieaunic 101 EEE N E E E E 102 Exploring the desktop sccccsccccercnerr 102 Finding your way around the desktop 102 Windows Store 0 ceceeceessessecessessesssessereeeeeeerens 104 Setting up for communications 104 Connecting your computer to a network 105 Exploring audio features ncc 106 Recording SOuUndS en 106 Using external speakers or headphones 107 Using the Web Camera uuu ecceceeesceeseeeeeeenees 107 Using the Memory card reader 108 Inserting memory media 108 Removing memory media 109 Chapter 5 Utilities ou escssssesessssnsssestsnseeeneeen 110 BEES 100 08 SS a ne 111 Media amp Entertainment ou 112 Tools amp Utilities seach toetetet aes ates cece 113 Support amp RECOVETY ccecce 114 eco Utility oo ec ceceesecesees
165. ter When volume mute is enabled no sound will come from the speakers or headphones Disabling or enabling wireless devices This TOSHIBA Function key enables disables the Wi Fi K antenna in your computer F12 The wireless modes are Disables the wireless antenna Airplane mode is ON Enables the wireless antenna Airplane mode is OFF TOSHIBA Function Keys 1 61 Functions Keyboard Function keys Fn This TOSHIBA Function key allows you to zoom out 1 Fn This TOSHIBA Function key allows you to zoom in 2 Zoom Display resolution a This TOSHIBA Function key switches screen resolution Fn Space bar Cycle through the screen resolutions and then select the desired resolution Appendix B Power Cord Cable Connectors Your computer ships with the correct power supply for the country of purchase This appendix shows the shapes of the typical AC power cord cable connectors for various parts of the world USA Canada UL approved CSA approved United Kingdom Europe Cc VDA approved il NEMKO approved BS approved Australia AS approved 162 Glossary TECHNICAL NOTE Some features defined in this glossary may not be available on your computer Va wl Acronyms The following acronyms may appear in this User s Guide AC Alternating Current BIOS Basic Input Output System BD ROM Blu ray Disc Read Only Memory bps bits per second CD Compa
166. the System Properties window appears 4 Click Configure 150 lf Something Goes Wrong Develop good computing habits GO N n wm 9 Under Restore settings select Turn on System Protection Click OK Click Create In the input field enter a name that is descriptive enough to be easily understood in the future such as Before installing Brand X Accounting app Then click Create The Windows operating system creates the restore point automatically stamps it with the current date and time and displays a message that the restore point was successfully created Click Close Then at a later time you can re establish your Windows configuration using the saved restore point To do this 1 From the Start screen type Control Click Control Panel from the list that appears 2 Click System and Security and then System 3 In the left pane click System Protection The System Protection tab of the System Properties window appears 4 Click System Restore 5 Click Next 6 Click the Restore point you want to use then click Next The time stamp and description of each Restore point is displayed NOTE At this point you can click Scan for affected programs to determine what the impact of using the clicked Restore Point will be 7 Verify that the Restore point you clicked is the correct one If it is not click Back to return to the previous step 8 Close all programs and save all open files 9 Click F
167. the port on the computer and to the device 3 Connect the device s power cable to a live electrical outlet if applicable 4 Turn on the external device if applicable Your computer may automatically detect the external device Using external display devices Your computer comes with a built in display but you can also connect the following types of external display devices to the video ports described below NOTE To locate your HDMI or RGB port please refer to your Quick Start document An HDMI compatible television or external display device via the HDMI Out port 68 Getting Started Using external display devices An external monitor or projector via the RGB monitor port RGB Monitor port HDMI Out port Available on certain models Sample Illustration Video ports Selecting video cables To connect a device to the HDMI Out port you must purchase an HDMI cable Connecting an HDMI compatible television or display device To connect an HDMI compatible television or display device to the computer Connect one end of an HDMI cable not included with your computer to the HDMI Out port on the side of your computer and then connect the other end of the cable to your television or display device Refer to the manual that came with the television or display device for more information Your computer should automatically detect the external
168. the set sequentially for example 1 of 3 2 of 3 etc so that you will know in which order to insert the discs during recovery For information on using the Recovery media you have created with the preceding steps see Restoring from recovery media on page 57 Restoring from recovery media CAUTION Ihe recovery process deletes information stored on the internal Storage drive Be sure to save your work to external media before executing the recovery see Backing up your work on page 78 NOTE During the recovery process your computer must be connected to an external power source via the AC adaptor If you have created recovery media for your system you can restore your system from such media if necessary For example if your original internal storage drive fails you can restore your system to a new internal storage drive from your recovery media For instructions on creating recovery media see Creating recovery media on page 55 NOTE When you restore your system only the operating system files applications and drivers originally shipped with the computer are restored Any files that you created are not restored during this process Be sure to separately save the files you have created to external media using Windows or another backup program For more information see Backing up your work on page 78 To recover your internal storage drive from recovery media 1 Make sure
169. thorized service center A CAUTION Avoid prolonged physical contact with the underside or surface of the computer Computer base and palm rest can become hot Avoid prolonged contact to prevent heat injury to skin Today s performance computers generate heat under normal operating conditions as a function of system activity Avoid extended contact between the computer base or palm rest and your skin Under certain operating conditions such prolonged contact between the computer base or palm rest and your skin may result in skin irritation and or heat injury Consider using a hard computer insulating pad or similarly suitable hard insulating material when using a computer on your lap CAUTION Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer It could damage the computer or cause system failure Never turn off the computer if a drive light indicates a drive is active Turning off the computer while it is reading from or writing to a disk disc or flash media may damage the disk disc or flash media the drive or both Getting Started 3 Selecting a place to work gt oe Keep the computer and disks away from objects that generate strong magnetic fields such as large stereo speakers Information on some disks is stored magnetically Placing a magnet too close to a disk can erase important files CAUTION Handle discs carefully Avoid t
170. tings screen 4 Click General 5 Scroll down to Refresh your PC without affecting your files and click Get Started The Refresh your PC screen appears Sample Image Refresh your PC screen CAUTION Toshiba does not guarantee successful data back up Be sure to save your work to external media before executing the recovery see Backing up your work on page 78 60 Getting Started Recovering the Internal Storage Drive 6 Click the Next button to begin The Ready to refresh your PC screen appears Sample Image Ready to refresh your PC screen You will be prompted to refresh your system 7 Click the Refresh button 8 Your system will restart The Refreshing your PC window appears When the process is complete your system will reboot your Windows operating system Reset your PC CAUTION The recovery process deletes information stored on the internal Storage drive Be sure to save your work to external media before executing the recovery see Backing up your work on page 78 NOTE During the recovery process your computer be must connected to an external power source via the AC adaptor 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings ED Charm Getting Started 61 Recovering the Internal Storage Drive 3 Click Change PC Settings
171. tions that are not currently running with an at a glance characteristic giving you a quick preview of the subject line of your latest email or the current weather conditions Badge notifications A specialized type of tile notification shown on the Start screen tile using glyphs to indicate the number of applications that have updates available or the status of a running application Raw notifications These run a background task on behalf of an application while that application is not running in order to make available the latest content such as an online newspaper Windows Store Although many applications will be pre installed or built in to your computer you will also have the ability to download many other applications with the click of your mouse In the Windows Store you can search for and browse thousands of apps all grouped into easy to find categories Setting up for communications To connect to the Internet you need A browser or communications application An Internet Service Provider ISP or online service if you plan to use the Internet A way to connect to the ISP for example Wi Fi LAN broadband connection etc Exploring Your Computer s Features 1 0 Setting up for communications O1 Using Wireless LAN connectivity NOTE Wireless connectivity and some features may require you to purchase additional software external hardware or services Availability of public wireless LAN acce
172. tips for computing 73 Toshiba online resources 83 registering computer Toshiba Web site 42 worldwide offices 155 Toshiba accessories memory 45 TOSHIBA Application Installer 127 TOSHIBA Function Keys functions 156 touch pad using 64 traveling tips 99 troubleshooting 139 AC power light is blinking 130 battery light is blinking 131 bookmarked site not found 134 checking device properties 135 computer will not start 129 contacting Toshiba 154 corrupted damaged data files 143 data entire system backup 151 Device Manager 135 display error message 140 display problems screen is blank 139 DVD player 147 eject button 143 error message warning resume failure 130 Error checking 141 external display problems 140 external keyboard 138 external monitor 139 good computing habits 148 hard disk drive is slow 142 high pitched noise 144 installing hardware software 151 keyboard 138 keyboard will not respond 129 memory problems 136 missing files trouble accessing a drive 141 on screen eject button 144 Index 183 optical disc drive 143 power and batteries 137 printer 144 restore points 149 screen does not look correct flickers 139 slow Internet connection 134 sound system 144 trouble running discs 144 trouble running programs 143 URL address not found 134 USB Sleep and Charge cannot use 153 USB Wakeup function does not work 153 Windows operating system not working 131 wireless networking 145 U USB
173. ts on the edge of the keyboard or on the work surface when typing The monitor should be about an arm length away while sitting back in the chair The monitor should be centered in front of your body The top of the monitor should be at or slightly below eye level A monitor that is too high or too low can cause awkward head and neck postures and may lead to discomfort in the neck muscles If you use bifocals you may need to lower the monitor Alternatively you might consider customized prescription computer glasses Typing style Learn to touch type so that you don t have to look down at the keyboard Type with straight wrists Type lightly Learn the keyboard shortcuts for your applications You will be more productive Use the pointing device e g touch pad Accupoint or tablet pen whichever is available with your notebook computer or other optional pointing devices like mouse or trackball with a comfortable hand posture Avoid awkward hand postures or high gripping force Itis helpful to change the type of pointing device that you use on a regular basis to avoid working in just one hand posture Taking breaks and varying tasks o Change they way you work so that you are not stuck in the same posture for long periods of time Some people find it comfortable to occasionally stand while using the notebook To do this properly the notebook needs to be on an elevated surface Make
174. u cannot access a disc in the drive If the optical disc drive is an external drive make sure the two USB cables or the AC adaptor cable are properly connected to the computer and refer to the documentation that came with your drive Make sure the tray that holds the optical disc is closed properly Press gently until it clicks into place Open the tray and remove the disc Make sure the tray is clean Any dirt or foreign object can interfere with the laser beam Examine the disc to see if it is dirty If necessary wipe it with a clean cloth dipped in water or a neutral cleaner Replace the disc in the tray Make sure that the disc is lying flat against the tray label side up Close the tray carefully making sure it has shut completely You press the disc eject button but the drive tray does not slide out Make sure the computer is connected to a power source and turned on The optical disc drive eject mechanism requires power to operate Make sure an application is not accessing the drive and preventing it from ejecting If you need to remove a disc and cannot turn on the computer for example if the battery is completely discharged use a narrow object such as a straightened paper clip to press the manual eject button This button is in the small hole next to the optical disc drive eject button on the face of the optical disc drive tray 1 4 4 lf Something Goes Wrong Sound system problems Never use a pencil to
175. uble click the Desktop Assist icon 2 Click Tools amp Utilities 3 Click the User Password icon A pop up screen appears asking for a password 4 Enter your password 5 Click Delete An authority verification pop up screen appears 6 Click Delete 7 Enter the password and then click Verify 8 Click OK to exit Utilities 1 1 Q System Settings System Settings System Settings is the TOSHIBA configuration management tool available through the Windows operating system To access it 1 To access System Settings from the Start screen begin typing System Settings or while in the Desktop screen double click the Desktop Assist icon 2 Click Tools amp Utilities 3 Click System Settings The System Settings screen appears TOSHIBA x I E TOSHIBA System Settings allows you to configure your computer 1 TOSHIBA System Settings 1 00 0007 32002 System Settings Copynight 2002 TOSHAA Consort All met nana BIDS virion 5 8 00170012 EC Version O17 Sleep and Charge Display OK Cancel Apply Sample Image System Settings screen General tab options The System Settings screen may have the following tabs Boot Allows you to change the sequence in which your computer searches the drives for the operating system Boot Speed Reduces the time needed for the BIOS to initialize using either the Fast or Normal settings Panel open Power on Allows you to turn on t
176. uency Hopping Spread Spectrum FHSS radio technology and is compliant to Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special Interest Group CAUTION Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more up to a total of seven TOSHIBA portable computers using these cards Please contact TOSHIBA computer product support on Web site http www toshiba europe com computers tnt bluetooth htm in Europe or support toshiba com in the United States for more information When you use Bluetooth cards from TOSHIBA close to 2 4 GHz Wireless LAN devices B uetooth transmissions might slow down or cause errors If you detect certain interference while you use B uetooth cards from TOSHIBA always change the frequency move your computer to the area outside of the interference range of 2 4 GHz Wireless LAN devices 40 meters 43 74 yards or more or stop transmitting from your computer Please contact TOSHIBA computer product support on Web site http www toshiba europe com computers tnt bluetooth htm in Europe or support toshiba com in the United States for more information Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experien
177. uld hang up the next time you turn it on and data in memory will be lost In either of the above cases the Sleep configuration will not be saved 2 Pull the latches away from the memory module The memory module pops up slightly NOTE If your system has the memory modules stacked on top of one another you must remove the top module first before removing installing the bottom module 3 Gently lift the memory module to a 30 degree angle and slide it out of the slot Back of computer Slot B Slot A Sample Illustration Removing the memory module 4 Replace the memory module slot cover and secure it using the screw s 5 Re insert the main battery For more information on inserting the main battery see Inserting a charged battery on page 95 6 Turn the computer right side up Make sure to remove the soft cloth from the work surface before restarting the computer Getting Started D Adding memory optional OO Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet even if your computer is in Sleep mode In this condition observe the following Never cover your computer or AC adaptor with any object Never place your computer or AC adaptor near a heat source such as an electric blanket or heater s Never cover or block the air vents including those located at
178. ures of your computer Exploring the Start screen 100 The Start screen is the launching pad for everything you can do in the Windows operating system providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information When you move your pointer over the upper or lower right corner of your screen a list of Charms will slide out from the right These Charms perform various commands including basics tasks like turning off the power and advanced PC settings You can go to the Start screen by clicking the Start charm see Charms on page 101 You can also use the Windows key 88 on your keyboard or on the LCD screen to go to Start screen For detailed information please refer to the Windows Help and Support By clicking on the Desktop tile from the Start screen you will find the Windows settings and features you are most familiar with Exploring Your Computer s Features 1 01 Exploring the Start screen For detailed information on the new Windows 8 functionality refer to the Windows Help and Support App tiles Sample Image Windows Start screen Charms Use the Windows Charms to start apps find documents set up system components and perform most other computing tasks By swiping in from the right edge only for touch screen models or pointing the mouse pointer to the upper or lower right corner of your screen you will find a
179. use it for longer periods while traveling Running the computer on battery power The computer contains a removable Lithium Ion Li Ion battery that provides power when you are away from an AC outlet You can recharge it many times 34 Mobile Computing 85 Running the computer on battery power Battery Notice Battery life rating is for comparison purposes only and does not indicate the battery life that will be obtained by any individual user Actual battery life may vary considerably from specifications depending on product model configuration applications power management settings and features utilized as well as the natural performance variations produced by the design of individual components The battery life rating is only achieved on the select models and configurations tested by Toshiba under the specific test settings at the time of publication and is not an estimate of a system s battery life under any conditions other than the specific test settings Recharge time varies depending on usage Battery may not charge while the computer is consuming full power After a period of time the battery will lose its ability to perform at maximum capacity and will need to be replaced This is normal for all batteries To purchase a new battery pack see the accessories information included with your computer or visit the Toshiba Web site at accessories toshiba com Use only batteries designed to work with your Toshiba computer
180. uter has two memory slots Slot A and Slot B You can install one or two memory modules CAUTION Before you install or remove a memory module turn off the computer If you install or remove a memory module while the computer is in Sleep or Hibernation mode data will be lost NOTE For this model Slot A is the bottom slot Slot B is the top slot If only one memory module is to be installed it must be installed in Slot A If the computer is on begin at step 1 otherwise skip to step 5 1 From the Start or Desktop screen move your pointer over the upper or lower right corner of the screen 2 When the Windows Charms appear click the Settings R3 Charm CAUTION Pressing the power button before shutting down the Windows operating system could cause you to lose your work Make sure the system indicator panels storage drive light and the drive in use light are off If you turn off the power while a disk disc is being accessed you may lose data or damage the disk disc and or drive 3 In the lower right of the screen click the Power f icon Shut down option x Shut down Available Restart Power button nO Notifications Power Keyboard Sample Image Shut down Getting Started 4f Adding memory optional Highlight Shut down while holding the Shift key and then click the Shut down option The computer closes all open applications shuts down the operating system and then turns o
181. uter is ENERGY STAR qualified Toshiba is a partner in the Environmental Protection Agency s EPA ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes To conserve energy your computer is set to dim the display after 10 minutes of inactivity and enter the low power Sleep mode which shuts down the system after 15 minutes of inactivity in AC power mode We recommend that you leave this and other energy saving features active so that your computer will operate at its maximum energy efficiency You can wake the computer from Sleep mode by pressing the power button See the Mobile Computing section of the Toshiba User s Guide for more information on using power management settings to conserve computer energy 20 20 Introduction When considering additions to your home office purchase products that have earned the ENERGY STAR for all your equipment needs which can save you money save energy and help protect the climate Visit http www energystar gov or http www energystar gov powermanagement for more information regarding the ENERGY STAR Program NOTE This computer is compatible with European Union Directive 2002 95 EC Restriction of the use o
182. ve any cables connected to the computer including the AC adaptor Close the display panel and turn the computer upside down Slide the battery release lock to the unlocked position Sample Illustration Unlocking the battery release lock Mobile Computing O5 Changing the main battery 6 Slide the battery release latch to release the battery 7 Pull the discharged battery out of the computer 2 5 Se SOK SIO Shek Sample Illustration Removing the battery AWARNING i the battery is leaking or its case is cracked put on protective gloves to handle it and discard it immediately Always dispose of used battery packs in compliance with all applicable laws and regulations Put insulating tape such as cellophane tape on the electrode during transportation to avoid a possible short circuit fire or electric shock Failure to do so could possibly result in serious injury Inserting a charged battery To insert a battery 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection 2 Insert the charged battery into the slot until the latch clicks The battery pack has been designed so that you cannot install it with reverse polarity 96 Mobile Computing Changing the main battery CAUTION i the battery does not slide into the slot easily move the battery release lock to the unlocked position and try again Do not force the battery into position Sample Illustrat
183. wer on the computer to charge the device or use a different charging device The USB Wakeup function does not work When the USB Sleep and Charge function is set to Enabled the USB Wakeup function does not work for ports that support the USB Sleep and Charge function In that case use a USB port that does not have the USB Sleep and Charge function compatible icon 4 if you have a non Sleep and Charge USB port available or disable the USB Sleep and Charge function For more information see Sleep and Charge on page 120 1 D 4 lf Something Goes Wrong If you need further assistance If you need further assistance If you have followed the recommendations in this chapter and are still having problems you may need additional technical assistance Since some problems may be related to the operating system or the application you are using it is important to investigate all sources Review the troubleshooting information in your operating system documentation If the problem occurs while you are running an application consult the application s documentation for troubleshooting suggestions Contact the software company s technical support group for their assistance gt Consult the dealer from whom you purchased your computer and or application Your dealer is your best source for current information For the detailed specifications for your computer visit sup
184. will lose all the data on it unless you have a separate backup copy For more information see Data and system configuration backup in the Windows operating system on page 149 and optimize disk space and improve performance Scan all new files for viruses Use Error checking and Disk Defragmenter regularly to check This precaution is especially important for files you receive via external media email or download from the Internet eyestrain a drive is active Take frequent breaks to avoid repetitive motion injuries and Do not turn off the computer if a drive indicator light indicates Turning off the computer while it is reading from or writing to a disk may damage the disk the drive or both NOTE The Windows operating system records information such as your desktop setup during its shutdown procedure If you do not let the Windows operating system shut down normally details such as new icon positions may be lost Using the keyboard Your computer s keyboard contains character keys control keys function keys and special Windows keys providing all the functionality of a full size keyboard afek PIRITI EEIE e celne e a BACK a NO m m SAET aaoo z 4 m 5 xX per a 5 z 7 m e JUJA ICICI J H CJ 70G e JOE ide eda ES Sample Illustration Keyboard a m 4 p m z o
185. y object Make sure there is no way for a potential thief to slip the cable off the object 2 Pass the locking end through the loop 12 Getting Started Caring for your computer W 3 Insert the cable s locking end into the security lock slot on your computer then engage the locking device The computer is now securely locked Sample Illustration Attaching security lock cable Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features Computing tips Save your work frequently Your work stays in the computer s temporary memory until you save it to the internal storage drive If the network you are using goes down and you must restart your computer to reconnect or your battery runs out of charge while you are working you will lose all work since you last saved See Saving your work on page 78 for further information Vv HINT Some applications have an automatic save feature that can be ce activated This feature saves your file to the internal storage drive at i d preset intervals See your software documentation for details 13 14 Learning the Basics Using the keyboard the backup copies clearly and store them in a safe place Back up your files to external media on a regular basis Label It is easy to put off backing up because it takes time However if your internal storage drive suddenly fails you
186. y with the center hole and edge Do not touch the surface of the disc Do not stack discs If you incorrectly handle the discs you could lose data Learning the Basics 8 Using the optical disc drive 6 Make sure the disc is completely on the spindle and is lying flat on the tray CAUTION fyou insert the disc incorrectly it may jam the drive If this happens contact Toshiba support for assistance 7 Push the disc tray in by pressing gently on the center of the tray until it clicks into place Removing a disc with the computer on To remove an optical disc with the computer turned on 1 Press the eject button on the drive CAUTION Do not press the eject button while the drive in use indicator light is glowing Doing so could damage the disc or the drive Also if the disc is still spinning when you open the disc tray wait for it to stop spinning before you remove it 2 Remove the disc and place it in its protective cover 3 Gently press the tray in to close it Playing optical media If you insert an optical disc into the optical disc drive and the Auto Run feature does not automatically start your disc try launching the optical disc manually To do this follow these steps 1 Press the 8 E keys 2 Double click the optical disc drive icon The drive will run the optical disc If your disc does not run using this method try using an application that is associated with the media on t

Download Pdf Manuals

Related Search

Related Contents

VL6180X premium evaluation kit (EVK) hardware user manual  Massive Pedestal/post 15403/86/10  Before initial use, see “Getting Started” on page 8. Operating  MNPG151-00 (NUOVO MIO  Ar quente ökotherm  5210 Classic Cooler Manual  「資料7」 (ファイル名：26-02-11_shiryou7 サイズ：2.54MB)  

Copyright © All rights reserved. Failed to retrieve file