Elo Touch Solution VuPoint 19''
Contents
1. User Buttons User buttons are capacitive buttons Use of finger or appropriate stylus is required for proper function Power Button The power button function is different depending on the state of the touchcomputer e When the touchcomputer is booted into an operating system the power button will turn off and on the display backlight e When the touchcomputer is in a sleep state such as hibernate the power button will wake up the system e After an operating system shutdown event occurs and power is still applied to the touchcomputer the power button will boot the computer Reading Light Function Touch the reading light icon and use the function adjustment icons to adjust the intensity Current setting is displayed between icons E 8 Night Light Function Touch the night light icon and use the function adjustment icons to adjust the intensity Current setting is displayed between icons M Series Touchcomputer User Guide 6 Screen Brightness Function Touch the screen brightness icon and use the function adjustment icons to adjust the intensity Current setting is displayed in between icons Audio Volume Function Touch the audio volume icon and use the function adjustment icons to adjust the intensity Current setting is displayed in between icons JE T Function Adjustment The function adjustment icons are illuminated when enabled Touching one of the function i2. M Series Touchcomputer User Guide M Series LCD Multi function Touchcomputer 19 model shown with optional accessories L D TOUCH SOLUTIONS Elo Touch Solutions M Series Touchcomputer for Healthcare Applications User Guide Multi function Touchcomputer Revision A SW200069 1 800 ELOTOUCH 1 800 356 8682 www elotouch com M Series Touchcomputer User Guide ii Copyright 2012 Elo Touch Solutions Inc All Rights Reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means including but not limited to electronic magnetic optical chemical manual or otherwise without prior written permission of Elo Touch Solutions Disclaimer The information in this document is subject to change without notice Elo Touch Solutions Inc Elo Touch Solutions makes no representations or warranties with respect to the contents herein and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose Elo Touch Solutions reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo Touch Solutions to notify any person of such revisions or changes Trademark Acknowledgments AccuTouch Elo TouchSystems Elo TouchSystems logo Elo Intelli Touch iTouch Elo Touch Solutions and Elo To
3. The slots located on the sides and top of the touchcomputer case are for ventilation Do not block or insert anything inside the ventilation slots It is important that your touchcomputer remains dry Do not pour liquid into or onto your touchcomputer If your touchcomputer becomes wet do not attempt to repair it yourself Contact Elo Touch Solutions Customer Service for instructions Guidance and manufacturer s declaration electromagnetic immunity for all EQUIPMENT AND SYSTEMS reports are available upon request M Series Touchcomputer User Guide 16 Care and Handling The following tips help keep your touchcomputer functioning at the optimal level Power down the unit and disconnect from the electrical mains prior to engaging in any cleaning activities Take care to ensure no leakage of solution into the system IF ANY FLUID INGRESS INTO THE UNIT DURING CLEANING IS SUSPECTED DO NOT POWER ON THE UNIT Call the manufacturer at the contact numbers listed below to have your unit inspected by a qualified technician prior to powering on Careful application of dilute aqueous cleaning solutions non ammonia based according to directions is recommended Do not spray cleaning solution directly onto touchscreen always use a cloth or towel that has been lightly pre moistened with cleaning solution Do not use organic solvents e g turpentine varsol and benzene abrasive cleansers or compressed air to clean touchscreen displays or touchcompu
4. U P C 46 mm to 419 mm 1 6 to 16 5 o mil Code 39 64 mm 163 mm 2 5 6 4 10 mil Code 39 28 mm 338 mm 1 1 13 37 6 7 mil PDFA17 46 mm 185 mm 1 8 7 3 10 mil Data Matrix o3 mm 203 mm 2 17 8 07 Resolution linear bar codes 0 127 mm 5 0 mil Resolution 2D matrix codes 0 169 mm 6 7 mil Performance may be impacted by bar code quality and environmental conditions Smart Card Reader A contact smart card reader is an optional M Series touchcomputer peripheral The smart card reader supports ISO 7816 microprocessor or memory cards M Series Touchcomputer User Guide 12 RFID Reader An RFID reader is an optional M Series touchcomputer peripheral If installed the RFID reader is capable of reading tags presented within a few centimeters of the symbol shown below on the front of M Series touchcomputer Compatible RFID standards are shown below e 14443A Mifare Classic e 14443A Mifare Desfire e 15693 ICODE TOUCH H SOLUTIONS M Series Touchcomputer User Guide 13 USB Handset A USB Handset Is an optional M Series touchcomputer peripheral Included in the kit is a bracket and handset cradle that is required for correct function Part number E709063 TV Tuner A USB TV Tuner kit is available as an optional accessory There are three options available All options include a 1 2 meter USB extension cable that can be plugged into the I O area under the cable cover so that the TV Tuner can
5. 15MX 19MX Touchcomputer for Healthcare Applications is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled The customer or the user of the 15MX 19MX Touchcomputer for Healthcare Applications can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment and the 15MX 19MX Touchcomputer for Healthcare Applications as recommended below according to the maximum output power of the communications equipment Separation Distance According to Frequency of Transmitter Rated Maximum Output Power of 150 kHz to 80 MHz 80MHz to 800 MHz 800 MHz to 2 5 GHz Transmitter d 2 3 4P For transmitters rated at a maximum output power not listed above the recommended separation distanced in metres m can be estimated using the equation applicable to the frequency of the transmitter where P is the maximum output power rating of the transmitter in watts W according to the transmitter manufacturer NOTE 1 At 80 MHz and 800 MHz the separation distance for the higher frequency range applies NOTE 2 These guidelines may not apply in all situations Electromagnetic propagation is affected by absorption and reflection from structures objects and people M Series Touchcomputer User Guide xiii Table of Contents Chapter ie SOU ME 1 Unpacking Your Re Tei ee e cise cache cacecewcudcnnctnseueceeinnieiesioaestavel ncbsauelvaeataseiiaveueesa
6. CE Con la presente Elo Touch Solutions Inc dichiara che questo 15MX 19MX Touchcomputer conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Ar o Elo Touch Solutions Inc deklar ka 15MX 19MX Touchcomputer atbilst Direktivas 1999 5 EK b tiskaj m pras b m un M Series Touchcomputer User Guide 24 Lietuviu Lithuanian Nederlands Dutch wt Malti Maltese Magyar Hungarian p Polski Polish Portugu s Portuguese Slovensko Slovenian Slovensky Slovak ti Suomi Finnish Lal Svenska Swedish citiem ar to saistitajiem noteikumiem iuo Elo Touch Solutions Inc deklaruoja kad Sis 15MX 19MX Touchcomputer atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Hierbij verklaart Elo Touch Solutions Inc dat het toestel 15MX 19MX Touchcomputer in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Hawnhekk Elo Touch Solutions Inc jiddikjara li dan 15MX 19MX Touchcomputer jikkonforma mal htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid Dirrettiva 1999 5 EC Alul rott Elo Touch Solutions Inc nyilatkozom hogy a 15MX 19MX Touchcomputer megfelel a vonatkoz alapvet k vetelm nyeknek s az 1999 5 EC ir nyelv egy b el r sainak Niniejszym Elo Touch Solutions Inc o wiadcza ze 15MX 19MX Touchcomputer jest zgodny z zasadniczy
7. Transportation 5 to 95 Altitude Operating 0 to 2 000m Storage Transportation 0 to 12 192m 15MX 19MX Touchcomputer for Healthcare Applications is intended for general use in hospital environment for data collection and display for reference It shall not be used with life supporting system For full Product Specifications refer to Appendix C M Series Touchcomputer User Guide vii European Standards and Classifications Standards EN 60601 1 2 2007 The EMC limits and test methods are referred to the following standards Emission Immunity CISPR 11 2009 A1 2010 IEC 61000 4 2 2008 EN55011 2009 A1 2010 IEC 61000 4 3 2006 A1 2007 A2 2010 Group 1 Class A IEC 61000 3 2 IEC 61000 4 4 2011 2005 A1 2008 A2 2009 IEC 61000 3 3 2008 IEC 61000 4 5 2005 IEC 61000 4 6 2008 IEC 61000 4 8 2009 IEC 61000 4 11 2004 M Series Touchcomputer User Guide viii Guidance and manufacturer s declaration electromagnetic immunity for all EQUIPMENT AND SYSTEMS Guidance and manufacturer s declaration electromagnetic emissions The 15MX 19MX Touchcomputer for Healthcare Applications is intended for use in the electromagnetic environment specified below The customer or the user of the 15MX 19MX Touchcomputer for Healthcare Applications should assure that it is used in such an environment Emissions test Compliance Electromagnetic environment guidelines RF emissions Group 1 CISPR 11 RF emissions Class A emn fe Harmonic
8. and used according to this manual the equipment may cause interference with radio and television communications There is however no guarantee that interference will not occur in any particular installation due to site specific factors 1 In order to meet emission and immunity requirements the user must observe the following a Use only the provided I O cables to connect this digital device with any computer b To ensure compliance use only the provided manufacturer s approved line cord C The user is cautioned that changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 If this equipment appears to cause interference with radio or television reception or any other device a Verify as an emission source by turning the equipment off and on b If you determine that this equipment is causing the interference try to correct the interference by using one or more of the following measures i Move the digital device away from the affected receiver ii Reposition turn the digital device with respect to the affected receiver iii Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits iv Disconnect and remove any I O cables that the digital device does not use Unterminated I O cables are a potential M Series Touchcomputer User Guide 20 sou
9. be installed outside of the M Series device e Japan TV Tuner Kit that supports the ISDB standard Part number E421980 e Europe TV Tuner Kit that supports the DVB standard Part number E3 8259 e United States TV Tuner Kit that supports the ATSC standard Part number E177386 3 Meter DC extension cable A 3 Meter DC extension cable can be used to replace the original 5 Meter DC extension cable Part number E175539 M Series Touchcomputer User Guide 14 AC Cable A country specific AC cable can be used to replace the original AC Cable There are two options e UK HK 1 8 Meter AC cable Part number E010063 e Japan 1 8 Meter AC cable Part number E520117 M Series Touchcomputer User Guide 15 Safety CHAPTER SAFETY AND MAINTENANCE Important information regarding the proper setup and maintenance of your touchcomputer To reduce the risk of electric shock follow all safety notices and never open the touchcomputer case Turn off the product before cleaning refer to Care and Handling on page 17 for proper cleaning methods Your touchcomputer is equipped with a 3 wire grounding power cord The power cord plug only fits into a grounded outlet Do not attempt to fit the plug into an outlet that has not been configured for this purpose Do not use a damaged power cord Only use the power cord that comes with your Elo Touch Solutions touchcomputer Use of an unauthorized power cord might invalidate your warranty
10. may result in emissions in excess of the standard If it is determined that this device produces electromagnetic or other interference it must be disconnected from power until the cause of the problem has been determined and resolved If it is determined that this device is functioning improperly due to electromagnetic and other interference it must be disconnected from power until the cause of the problem has been determined and resolved e Elo Touch Solutions recommends that after its useful life or after sustaining unrepairable damage customers dispose of the touchcomputer and its power supply in an environmentally sound manner Acceptable methods include the reuse of parts or whole products and the recycling of products components and materials Please consult and obey national state and local laws and ordinances governing the safe disposal of electronic equipment e Do not modify this equipment without authorization of the manufacturer This product consists of devices that may contain mercury which must be recycled or disposed of in accordance with local state or federal laws M Series Touchcomputer User Guide iv AN Caution Power cord is used as a disconnection device To de energize equipment disconnect the power cord This unit must follow the national requirement and local state laws to dispose unit Before connecting the cables to your Elo touchcomputer make sure all components are powered OFF Only appr
11. refer to Chapter 3 Options and Upgrades Unpacking Your Touchcomputer Check that the following items are present and in good condition Touchcomputer Power cable US Canada 12VDC Medical Grade CD 5 meter DC cable Power Supplier Brick TOUCH B 0 SOLUTIONS M Series Touchcomputer User Guide 1 Touchcomputer Operating System The touchcomputer may be delivered without an operating system An operating system must be installed before many of the features of the touchcomputer can be used The hardware used on the touchcomputer is compatible with many common operating systems Accessing the Hard Disk The hard disk is factory installed and located under the hard disk cover on the back of the unit To access the hard drive remove the one screw holding the cover in place and remove the hard drive bracket to access the hard drive if necessary Remove this screw to gain access to the hard disk TOUCH B SOLUTIONS M Series Touchcomputer User Guide 2 Calibrating the Touchscreen The touchscreen is pre calibrated for accurate touch response If for any reason the touchscreen needs to be recalibrated right click the Elo icon in the Taskbar and then click Properties The following window opens NOTE Calibration is not applicable on projective capacitive touchscreen models NOTE OS and touchscreen drivers must be installed for Elo icon to appear in the Taskbar Dt Elo Touchscreen Propertie
12. set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This Class A digital apparatus complies with Canadian ICES 003 Ce dispositif est conforme la norme CNR 210 d Industrie Canada applicable aux appareils radio exempts de licence Son fonctionnement est sujet aux deux conditions suivantes 1 le dispositif ne doit pas produire de brouillage pr judiciable et 2 ce dispositif doit accepter tout brouillage recu y compris un brouillage susceptible de provoquer un fonctionnement ind sirable D claration d exposition aux radiations Cet quipement est conforme aux limites d exposition aux rayonnements IC tablies pour un environnement non contr l Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps Cet appareil num rique de la classe A est conforme la norme NMB 003 du Canada M Series Touchcomputer User Guide 22 Europe EU Declaration of Conformity This device complies with the essential requirements of the R amp TTE Directive 1999 5 EC The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R amp TTE Directive 1999 5 EC EN 60950 1 2006 A11 2009 A1 2010 A12 2011 Safety of Information Technology Equipment EN 50364 2010 Limitation of human exposure to electrom
13. ve shod se zakladnimi pozadavky a dalsimi p slu n mi ustanoven mi sm rnice 1999 5 ES Undertegnede Elo Touch Solutions Inc erkl rer herved at f lgende udstyr 15MX 19MX Touchcomputer overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Hiermit erkl rt Elo Touch Solutions Inc dass sich das Ger t 15MX 19MX Touchcomputer in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 1999 5 EG befindet K esolevaga kinnitab Elo Touch Solutions Inc seadme 15MX 19MX Touchcomputer vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele satetele Hereby Elo Touch Solutions Inc declares that this 15MX 19MX Touchcomputer is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Por medio de la presente Elo Touch Solutions Inc declara que el 15MX 19MX Touchcomputer cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE ME THN MAPOY2A Elo Touch Solutions Inc AHAONEI OTI 15MX 19MX Touchcomputer 2YMMOP ONETAI MPO2 TIX OYZIOAEIX ANAITHZEI2 KAI TIZ AOINE2 2XETIKE2 AIATAZEI TH OAHTIA 1999 5 EK Par la pr sente Elo Touch Solutions Inc d clare que l appareil 15MX 19MX Touchcomputer est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5
14. 180 Tel 650 361 4800 www tps co jp Fax 650 361 4747 customerservice elotouch com VSN UI pejuug 201 suonnjos YONOL 012 Z LOC TOUCH B SOLUTIONS M Series Touchcomputer User Guide 30
15. SHALL SELLER BE LIABLE FOR THE COST OF PROCUREMENT OR INSTALLATION OF SUBSTITUTE GOODS BY BUYER OR FOR ANY SPECIAL CONSEQUENTIAL INDIRECT OR INCIDENTAL DAMAGES Buyer assumes the risk and agrees to indemnify Seller against and hold Seller harmless from all liability relating to i assessing the suitability for Buyer s intended use of the Products and of any system design or drawing and ii determining the compliance of Buyer s use of the Products with applicable laws regulations codes and standards Buyer retains and accepts full responsibility for all warranty and other claims relating to or arising from Buyer s products which include or incorporate Products or components manufactured or supplied by Seller Buyer is solely responsible for any and all representations and warranties regarding the Products made or authorized by Buyer Buyer will indemnify Seller and hold Seller harmless from any liability claims loss cost or expenses including reasonable attorney s fees attributable to Buyer s products or representations or warranties concerning same M Series Touchcomputer User Guide 28 INDEX address Elo TouchSystems 36 base securing 4 box contents 1 cables included 1 calibration 2 3 certifications 32 contact information 24 controls location diagram 5 customer support 24 email Elo TouchSystems 36 enabling or disabling power 8 input output I O panel accessing 9 LEDs location diagram 5 magnetic strip
16. agnetic fields from devices operating in the frequency range 0 Hz to 300 GHz used in Electronic Article Surveillance EAS Radio Frequency Identification RFID and similar applications EN 62479 2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields 10 MHz to 300 GHz EN 300 328 V1 7 1 2006 Electromagnetic compatibility and Radio spectrum Matters ERM Wideband Transmission systems Data transmission equipment operating in the 2 4 GHz ISM band and using spread spectrum modulation techniques Harmonized EN covering essential requirements under article 3 2 of the R amp TTE Directive EN 302 291 1 V1 1 1 2005 Electromagnetic compatibility and Radio spectrum Matters ERM Short Range Devices SRD Close Range Inductive Data Communication equipment operating at 13 56 MHz Part 1 Technical characteristics and test methods Endorsement of the English version EN 302291 1 V1 1 1 2005 07 as German standard EN 302 291 2 V1 1 1 2005 Electromagnetic compatibility and Radio spectrum Matters ERM Short Range Devices SRD Close Range Inductive Data Communication equipment operating at 13 56 MHz Part 2 Harmonized EN under article 3 2 of the R amp TTE Directive Endorsement of the English version EN 302291 2 V1 1 1 2005 07 as German standard EN 301 489 1 V1 8 1 2008 Electromagnetic compatibility and Radio Spectrum Matter
17. cons will enable the function adjustment symbols and display the current setting on the dots between the symbols Use the symbol to decrease the intensity of the function and use the symbol to increase the intensity of the function The current setting will be immediately updated and saved After a short time the selected function will become deselected Other functions can be selected before the current function is deselected D Q Computer Shutdown Press and hold the volume icon and the power button icon for 3 seconds to hard shutdown the computer The icons will blink to confirm The power button can be used to turn the computer back on M Series Touchcomputer User Guide 7 Using the Input Output Panel To access the input output I O ports remove the cable cover on left side of the back of the unit Install the I O cables in the respective ports and use plastic cable ties to fasten the cables to the cable restraints shown below Below are the I O descriptions and location of the cable restraints Cable e j Restraints IH D Ethernet Dual Audio 12V DC USB 2 0 Line In Note As a safety precaution always leave the cable cover attached when the system is powered on sby PA I I PAI tis A A AI IM nnm ITR Ter HIA U MM LM IIVI U M Series Touchcomputer User Guide 8 CHAPTER OPTIONS AND UPGRADES Peripherals and Accessories The following peripherals and accessories are availabl
18. dance and manufacturer s declaration electromagnetic immunity for all EQUIPMENT AND SYSTEMS that are not LIFE SUPPORTING Guidance and manufacturer s declaration electromagnetic immunity The 15MX 19MX Touchcomputer for Healthcare Applications is intended for use in the electromagnetic environment specified below The user of the 15MX 19MX Touchcomputer for Healthcare Applications should assure that it is used in such an environment Immunity Test IEC 60601 Compliance Level Conducted RF 3 Vrms 3 Vrms Radiated RF 3 V m 3 Vrms IEC 61000 4 3 80 MHz to 2 5 GHz Electromagnetic Environment Guidelines Portable and mobile RF communications equipment should be used no closer to any part of the 15MX 19MX Touchcomputer for Healthcare Applications and should assure that it is used in such an environment including cables than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter Recommended separation distance d 1 2 1P d 1 24P 80MHz to 800 MHz d 2 3 4P 800 NHz to 2 5GHz where P is the maximum output power rating of the transmitter in watts W according to the transmitter manufacturer and d is the recommended separation distance in metres m Field strengths from fixed RF transmitters as determined by an electromagnetic site survey should be less than the compliance level in each frequency range Interference may occur in the vicinity of equ
19. e for the M Series touchcomptuers Magnetic stripe reader MSR Wireless adapter Solid State Drive SSD Webcam Barcode Scanner 2D area array Smart Card Reader RFID Reader USB Handset TV Tuner 3 Meter DC extension cable AC Cable Optional Accessory Note Software drivers and applications for all peripherals are available upon request elo OLUT m pg gg A E TA IP I i J M Series Touchcomputer User Guide 9 Magnetic Stripe Reader MSR A magnetic stripe reader MSR is an optional M Series touchcomputer peripheral Software application and drivers can be found on the web at www elotouch com The MSR is a USB 2 0 device that reads all three data stripes on standard credit cards or driver s licenses conforming to ISO ANSI standards The MSR has foreign language capability The card is read by sliding it through the guide with the magnetic stripe facing up when placed in the guide in the front of the M Series product The MSR features are Reads up to 3 tracks of information Bi directional swipe reading Superior reading of high jitter scratched and worn MagStripe cards Reliable for over 1 000 000 card swipes Reads 1507811 AAMVA and most other card data formats PC software makes configuration changes easy Swipe speeds from 3 to 60 inches per second Interfaces USB KB and USB HID Fully supports USB 2 0 M Series Touchcomputer User Guide 10 Wireless Card A wireless adapter is a s
20. e reader MSR overview 11 13 14 15 specifications 11 maintenance care and handling 18 mounting options 4 on screen display OSD enabling or disabling menu 8 operation 5 options adding 10 peripherals adding 10 phone number Elo TouchSystems 24 36 ports accessing 9 power enabling or disabling button lock 8 regulatory information 25 safety 18 setup mounting options 4 touchscreen calibration 2 3 unpacking 1 specifications magnetic stripe reader 11 wireless card 12 technical support 20 touchscreen calibrating 2 3 care and handling 18 upgrades adding 10 warranty 33 website Elo TouchSystems 24 36 wireless card overview 12 specifications 12 M Series Touchcomputer User Guide 29 www elotouch com Get the latest e Product information e Specifications e News on upcoming events e Press release e Software drivers e Jouchcomputer Newsletter Getting in Touch with Elo To find out more about the extensive range of Elo touch solutions visit www elotouch com or simply call the office nearest you North America Europe Asia Pacific Elo Touch Solutions Inc Elo Touch Solutions Inc Sun Hamada Bldg 2F 301 Constitution Drive Diestsesteenweg 692 1 19 20 ShinYokohama Menlo Park CA 94025 B 3010 Kessel Lo Kanagawa 222 0033 USA Belgium Japan Tel 32 0 16 35 21 00 800 ELO TOUCH Fax 32 0 16 35 21 01 Tel 81 45 478 2161 800 356 8682 elosales elotouch com Fax 81 45 478 2
21. ion Medical Device Directive United States Federal Food Drug and Cosmetic Act regulations of the United States Food and Drug Administration FDA and for obtaining and maintaining any required regulatory approvals including but not limited to any required market clearances Elo has not sought nor received any rulings from the FDA or any other federal state or local government agency or notified body as to the safety effectiveness or appropriateness of its product for such applications Persons intending to evaluate or use Elo s product for medical or healthcare purposes must rely on their own medical and legal judgment without any representation on the part of Elo M Series Touchcomputer User Guide vi A E354528 07EG Classification With respect to electrical shock fire in accordance with ANSI AAMI ES60601 1 and CAN CSA C22 2 No 60601 1 This touchcomputer is a Class GROUNDED DEVICE This touchcomputer is classified NO APPLIED PARTS EQUIPMENT Protection against harmful ingress of water INGRESS PROTECTION IP21 This touchcomputer shall be classified as ORDINARY EQUIPMENT not intended or evaluated for use in the presence of flammable anesthetic mixture with air oxygen or nitrous oxide Mode of Operation CONTINUOUS OPERATION Environmental conditions for transport and storage Temp Operating 0 C to 35 C Storage Transportation 30 C to 60 C Humidity non condensing Operating 20 to 80 Storage
22. ipment marked with the following symbol a M Series Touchcomputer User Guide xi NOTE 1 At 80 MHz and 800 MHz the higher frequency range applies NOTE 2 These guidelines may not apply in all situations Electromagnetic propagation is affected by absorption and reflection from structures objects and people 3 Field strengths from fixed transmitters such as base stations for radio cellular cordless telephones and land mobile radios amateur radio AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy To assess the electromagnetic environment due to fixed RF transmitters an electromagnetic site survey should be considered If the measured field strength in the location in which the 15MX 19MX Touchcomputer for Healthcare Applications is used exceeds the applicable RF compliance level above the 15MX 19MX Touchcomputer for Healthcare Applications should be observed to verify normal operation If abnormal performance is observed additional measures may be necessary such as reorienting or relocating the 15MX 19MX Touchcomputer for Healthcare Applications 4 Over the frequency range 150 kHz to 80 MHz field strengths should be less than 3 Vrms M Series Touchcomputer User Guide xii Recommended separation distances between portable and mobile RF communications equipment and the 15MX 19MX Touchcomputer for Healthcare Applications for all EQUIPTMENT AND SYSTEMS that are not LIFE SUPPORTING The
23. lanedaiedsdeasielanetans I TOUCHCOMpUTEr Operatie SYSTE E 2 A COS Tle TA AGO D SPORT 2 Cae ein the POU CIS ie T 3 Securing the M Series AIO to a Mounting Bracket 4 Chapter 2 ODperallOn iiie nie iuca meno ono euo eenn enen ennenen enen 5 WSC BONON TOU 6 Using the Input Output Panel 8 Chapter 3 Options and Upgrades 9 Peripherals anu ACCeSSOPIBS idera redes S Gee to aeree cha gcoro s ortus eqeua cotes an ue vas unu SEAS Una PU inc Rut 9 Masnec Stripe Reader EE Kee 10 VV TCS ceci m J es 11 SOSE DI eere E E OE 11 We DCA eann 1 TEE 12 TO SP C eg IRC A E 12 PP EE 13 YT TPS eebe 14 dE Jaeger 14 SU MS ESSI 14 Ee 15 Chapter 4 Safety and Maintenance 16 ENEE 16 EE eege 17 Chapter 5 Technical Support eee 18 Chapter 6 Technical Specifications 18 Touchcomputer Specficatnong nnne eene nene nnnne ness sn nnn nnne esses nnn nnne enne 18 M Series Touchcomputer User Guide xiv Regulatory lu te tu de BE 19 MV UIUC E 27 INAO e E E 29 M Series Touchcomputer User Guide xv CHAPTER SETUP This chapter discusses how to set up and test your touchcomputer For information on peripheral options
24. ly lines lines that of a typical commercial or IEC 61000 4 4 1 kV for input output 1 kV for input output hospital environment lines lines 1 kV line s to 1 kV line s to Mains power quality should be i c line s line s that of a typical commercial or IEC 61000 4 5 2 kV line s to earth 2 kV line s to earth hospital environment lt 5 UT lt 5 UT Mains power quality should be gt 95 dip in UT gt 95 dip in UT that of a typical commercial or for 0 5 cycle for 0 5 cycle hospital environment If the user of the 15MX 19MX Touchcompute 40 UT 40 UT for Healthcare Applications Voltage Dips Short 60 dip in UT 60 dip in UT requires continued operation Interruption and Voltage for 5 cycles for 5 cycles during power mains interruptions Variations on Power It is recommended that the Supply Input Lines 70 UT 70 UT 15MX 19MX Touchcomputer for 30 dip in UT 30 dip in UT Healthcare Applications be powered from an uninterruptible for 25 cycles for 25 cycles power supply or a battery lt 5 UT 596 UT 29596 dip in UT 29596 dip in UT for 250 cycles for 250 cycles IEC 61000 4 11 Power Frequency Power frequency magnetic 50 60 Hz Magnetic fields should be at levels Field characteristic of a typical IEC 61000 4 8 location in a typical commercial or hospital environment NOTE UT is the A C mains voltage prior to application of the test level M Series Touchcomputer User Guide x Gui
25. mation A Compliance is required with respect to the voltage frequency and current requirements indicated on the manufacturer s label Connection to a different power source than those specified herein may result in improper operation damage to the equipment invalidation of warranty or a fire hazard if the requirements are not followed B There are no operator serviceable parts inside this equipment There are hazardous voltages generated by this equipment which constitute a safety hazard Service should be provided only by a qualified service technician C This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet 1 Do not substitute the cord with other than the provided approved type Under no circumstances should an adapter plug be used to connect to a 2 wire outlet as this will defeat the continuity of the grounding wire 2 The equipment requires the use of the ground wire as a part of the safety certification Modification or misuse can provide a shock hazard that can result in serious injury or death 3 Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to main power ll Emissions and Immunity Information A Notice to Users in the United States This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Pa
26. mi wymogami oraz pozostatymi stosownymi postanowieniami Dyrektywy 1999 5 EC Elo Touch Solutions Inc declara que este 15MX 19MX Touchcomputer est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE Elo Touch Solutions Inc izjavija da je ta 15MX 19MX Touchcomputer v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999 5 ES Elo Touch Solutions Inc tymto vyhlasuje Ze 15MX 19MX Touchcomputer sp a z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Elo Touch Solutions Inc vakuuttaa t ten ett 15MX 19MX Touchcomputer tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar Elo Touch Solutions Inc att denna 15MX 19MX Touchcomputer st r verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 1999 5 EG lll Agency Certifications The following certifications have been issued for the touchcomputer Canada cUL Canada IC Europe TUV CE Japan VCCI FCC United States UL Russia GOST R M Series Touchcomputer User Guide 25 IV Ingress Protection The 15MX 19MX Touchcomputer is designed to have an ingress protection rating of IP21 over the range of angles shown in the diagram below TOUCH el SOLUTIONS M Series Touchcomputer User Guide 26 WARRANTY Except as other
27. ocal authority or ask the shop where you purchased the product or if applicable follow any agreements made between yourself and the supplier of this product The mark on electrical and electronic products only applies to the current European Union Member States Elo Touch Solutions recommends that after its useful life or after sustaining unrepairable damage customers dispose of the touchcomputer and its power supply in an environmentally sound manner Acceptable methods include the reuse of parts or whole products and the recycling of products components and materials Please consult and obey national state and local laws and ordinances governing the safe disposal of electronic equipment M Series Touchcomputer User Guide v EG Explanation of Symbols his symbol alerts the user to important information concerning the operation and maintenance of this unit which should be read carefully to avoid problems his symbol means DC Current This symbol means ON OFF stand by switch e Consult instructions for use Medical and Healthcare Application Disclaimer It is the sole responsibility of any person intending to commercialize market or use any of Elo Touch Solutions Inc products for medical or healthcare applications to ensure that such product is adequate and appropriate for the person s intended use and complies with all applicable laws regulations codes and standards including but not limited to the European Un
28. oved components complying with IEC 60601 1 series can be connected to 15MX 19MX Touchcomputer for Healthcare Applications in Patient Environment The use of ACCESSORY equipment not complying with the equivalent safety requirements of this equipment may lead to a reduced safety of the resulting system Consideration relating to the choices of accessory equipment should include Use of accessory in the patient environment Evidence that the safety certification of the accessory has been performed in accordance to the appropriate IEC 60601 1 and or IEC 60601 1 1 harmonized national standard For continued safety e This unit only complies to the above standards if used with a medical grade power cord e A medical grade power supply such as the one specified is required for use in a medical application Please do not touch the patient and the touchcomputer output connecter at the same time The touchmonitor is to be used with following adaptor 1 XP Power AHM85PS12 or 2 Elo Touch Solutions FSP110 RAAM Disposing of your old product Within the European Union EU wide legislation as implemented in each Member State requires that waste electrical and electronic products carrying the mark left must be disposed of separately from normal household waste This includes monitors and electrical accessories such as signal cables or power cords When you need to dispose of your display products please follow the guidance of your l
29. rce of high RF emission levels v Plug the digital device into only a grounded outlet receptacle Do not use AC adapter plugs Removing or cutting the line cord ground may increase RF emission levels and may also present a lethal shock hazard to the user If you need additional help consult your dealer manufacturer or an experienced radio or television technician Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the follo
30. repairing the Product or ii replacing the Product Such modification repair or replacement and the return shipment of the Product with minimum insurance to Buyer shall be at Seller s expense Buyer shall bear the risk of loss or damage in transit and may insure the Product Buyer shall reimburse Seller for transportation cost incurred for Product returned but not found by Seller to be defective Modification or repair of Products may at Seller s option take place either at Seller s facilities or at Buyer s premises If Seller is unable to modify repair or replace a Product to conform to the warranty set forth above then Seller shall at Seller s option either refund to Buyer or credit to Buyer s account the purchase price of the Product less depreciation calculated on a straight line basis over Seller s stated Warranty Period M Series Touchcomputer User Guide 27 THESE REMEDIES SHALL BE THE BUYER S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE SELLER GRANTS NO OTHER WARRANTIES EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE REGARDING THE PRODUCTS THEIR FITNESS FOR ANY PURPOSE THEIR QUALITY THEIR MERCHANTABILITY THEIR NONINFRINGEMENT OR OTHERWISE NO EMPLOYEE OF SELLER OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WARRANTY FOR THE GOODS OTHER THAN THE WARRANTY SET FORTH HEREIN SELLER S LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO A REFUND OF THE PURCHASE PRICE OF THE PRODUCT IN NO EVENT
31. rt 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada C Notice to Users in the European Union Use only the provided power cords M Series Touchcomputer User Guide 19 and interconnecting cabling provided with the equipment Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards This Electronic Equipment is required to have a CE Mark on the manufacturer s label which means that the equipment has been tested to the following Directives and Standards This equipment has been tested to the requirements for the CE Mark as required by EMC 2004 108 EC and LVD 2006 95 EC indicated in European Standards EN55022 EN55024 and EN60950 1 as well as these standards for medical electrical equipment EN 60601 1 and EN60601 1 2 including EN55011 Class A D General Information to all Users This equipment generates uses and can radiate radio frequency energy If not installed
32. s General Made Sound Properties 1 About m Video alignment enables the computer to convert touchscreen coordinates into image coordinates Align the touchscreen whenever you Tnitialhy install the touchscreen drivers Change the touchmonitor or touchscreen hardware Notice the cursor ent lined up with your finger Click the Align button This launches the calibration program The window shown below opens Follow the instructions to calibrate the touchscreen t t Pal Em ebe hornos maium sm Len sz TOUCH SOLUTIONS M Series Touchcomputer User Guide 3 Securing the M Series AlO to a Mounting Bracket Use the four pre tapped holes to secure the touchcomputer to the mounting bracket The holes are designed to work with ISO metric M4 screws Mounting screws are not included Select the length screw that will provide adequate thread engagement to provide a reliable connection to the mounting bracket The correct length screw for your application should be commonly available at a hardware store Refer to the figure below for the location of the 4 holes Mounting Diagram TOUCH el SOLUTIONS M Series Touchcomputer User Guide 4 CHAPTER OPERATION This chapter describes the user button functions and I O panel All adjustments made to the user buttons are reset upon a power cycle to the touchcomputer TOUCH el SOLUTIONS M Series Touchcomputer User Guide 5
33. s ERM ElectroMagnetic Compatibility EMC standard for radio equipment and services Part 1 Common technical requirements EN 301 489 3 V1 4 1 2002 Electromagnetic compatibility and Radio Spectrum Matters ERM ElectroMagnetic Compatibility EMC standard for radio equipment and services Part 3 Specific conditions for Short Range Devices SRD operating on frequencies between 9 kHz and 40 GHz Blo M Series Touchcomputer User Guide 23 EN 301 489 17 V2 1 1 2009 Electromagnetic compatibility and Radio spectrum Matters ERM ElectroMagnetic Compatibility EMC standard for radio equipment and services Part 17 Specific conditions for 2 4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a wideband transmission system transceiver intended for use in all EU member states and EFTA countries except in France and Italy where restrictive use applies In Italy the end user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and or for supplying public access to telecommunications and or network services s Cesky Czech dal Dansk Danish Deutsch German Eesti Estonian English les Espanol Spanish EAAnviK Greek i Francais French Lit Italiano Italian Latviski Latvian Elo Touch Solutions Inc t mto prohla uje Ze tento 15MX 19MX Touchcomputer je
34. s emissions Not applicable IEC 61000 3 2 Voltage fluctuations Complies flicker emissions IEC 61000 3 3 The 15MX 19MX Touchcomputer for Healthcare Applications uses RF energy only for its internal function Therefore its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment The 15MX 19MX Touchcomputer for Healthcare Applications is suitable for use in all establishments other than domestic and those directly connected to a low voltage power supply network which supplies buildings used for domestic purposes M Series Touchcomputer User Guide ix Guidance and manufacturer s declaration electromagnetic immunity for all EQUIPMENT AND SYSTEMS Guidance and manufacturer s declaration electromagnetic immunity The 15MX 19MX Touchcomputer for Healthcare Applications is intended for use in the electromagnetic environment specified below The customer or the user of the 15MX 19MX Touchcomputer for Healthcare Applications should assure that it is used in such an environment Electromagnetic Environment Immunity Test IEC 60601 Compliance Level Mb Guidelines Electrostatic Discharge 6 kV contact 6 kV contact Floors should be wood ESD 8kV air 8 kV air IEC 61000 4 2 are covered with synthetic material the relative humidity concrete or ceramic tile If floors Electrical Fast 2 kV for power 2 kV for power supply Mains power quality should be Transient Burst supp
35. tandard peripheral in the M Series touchcomputer Typical specifications for the wireless card are e Mini PCI E module e IEEE 802 11 a b g n compliant Solid State Drive Webcam A solid state drive can be used to replace the original hard disk drive This addition provides additional performance and is more mechanically reliable in harsh environments Access to the original hard disk drive is through the right side cover on the back of the M Series touchcomputer Part number E520117 An integrated webcam is included in every M Series touchcomputer The Webcam module is a USB powered device that includes a 2 0 megapixel camera This webcam is capable of 2 0MP video at 5fos This webcam can run on the drivers that are already preset in many popular operating systems Webcam module specifications are shown in the table below Microphone 2 Million Pixel Webcam Module 1600x1200 1280x1024 640x480 352x388 320x240 176x144 160x120 M Series Touchcomputer User Guide 1 1 ofps max 2 0 megapixels 1600x1200 Auto Frame Rate 24fps max VGA mode 640x480 Field Of View FOV Focus Range 40cm Infinity Barcode Scanner A 2D area array barcode scanner is an optional M Series touchcomputer peripheral The barcode scanner has integrated illumination and is compatible with many barcode symbologies The barcode scanner supports a typical reading range shown in the table below Symbology X Dim Typical Range 100
36. ter For disinfection careful application of alcohol based disinfectants or branded commercially available quaternary ammonium compounds e g PRO SANTM brand TB QuatTM brand etc is recommended Use as little as practicable to reduce the risk of fluid ingress into the unit Warning This product consists of devices that might contain mercury which must be recycled or disposed of in accordance with local state or federal laws Within this system the backlight lamps in the touchcomputer display contain mercury elg Sf Wil d M Series Touchcomputer User Guide 17 CHAPTER TECHNICAL SUPPORT TECHNICAL SPECIFICATIONS Touchcomputer Specifications For touch computer specifications go to www elotouch com NOTE Not all operating systems or options are supported in all regions Please contact your local Elo TouchSystems representative for details Technical Assistance There are three methods to obtain contact information for technical assistance on the touchcomputer e he web e The phone Using the Web For technical support go to www elotouch com go contactsupport For current Elo news product updates and announcements or to register to receive our Touchcomputer newsletter go to www elotouch com go news Using the Phone For technical support see the table at the end of the user guide for contact information M Series Touchcomputer User Guide 18 REGULATORY INFORMATION l Electrical Safety Infor
37. uch Solutions logo are trademarks Windows is a trademark of Microsoft Corporation Other product names mentioned herein may be trademarks or registered trademarks of their respective companies Elo Touch Solutions claims no interest in trademarks other than its own M Series Touchcomputer User Guide iii Warnings and Cautions A Warning e Danger Explosion hazard Do not use in the presence of flammable anesthetics and other flammable materials To prevent fire or shock hazards do not immerse the unit in water or expose it to rain or moisture Donotuse the unit with an extension cord receptacle or other outlets unless the prongs of the power cord can be fully inserted RISK OF ELECTRICAL SHOCK DO NOT OPEN To reduce the risk of electrical shock DO NOT remove the back of the equipment or open the enclosure No user serviceable parts are inside Refer servicing to qualified field service engineers only Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock Avoid contact with any part inside the unit his device complies with the electromagnetic emission and immunity standards and is limited to the standards that are listed on pages 41 and 45 Other devices which are not designed to withstand emission levels as specified in the medical device standards may be susceptible to interference from this device Subjecting the device to conditions beyond the rated performance capabilities
38. wing measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter M Series Touchcomputer User Guide 21 Exposure to radio frequency radiation The radiated output power of this device is far below the FCC radio frequency exposure limits Nevertheless the device shall be used in such a manner that the potential for human contact during normal operation is minimized In order to avoid the possibility of exceeding the FCC radio frequency exposure limits human proximity to the antenna shall not be less than 20 cm 8 inches during normal operation Industry Canada statement This device complies with RSS 210 of the Industry Canada Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Radiation Exposure Statement This equipment complies with IC radiation exposure limits
39. wise stated herein or in an order acknowledgment delivered to Buyer Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship With the exception of the negotiated warranty periods the warranty for the touchcomputer and components of the product is 3 years Seller makes no warranty regarding the model life of components Seller s suppliers may at any time and from time to time make changes in the components delivered as Products or components Buyer shall notify Seller in writing promptly and in no case later than thirty 30 days after discovery of the failure of any Product to conform to the warranty set forth above shall describe in commercially reasonable detail in such notice the symptoms associated with such failure and shall provide to Seller the opportunity to inspect such Products as installed if possible The notice must be received by Seller during the Warranty Period for such product unless otherwise directed in writing by the Seller Within thirty 30 days after submitting such notice Buyer shall package the allegedly defective Product in its original shipping carton s or a functional equivalent and shall ship to Seller at Buyer s expense and risk Within a reasonable time after receipt of the allegedly defective Product and verification by Seller that the Product fails to meet the warranty set forth above Seller shall correct such failure by at Seller s options either i modifying or
Download Pdf Manuals
Related Search