iHome IP48
Contents
1. Battery indicators The internal battery status indicator appears on the lower right of the display The indicator changes depending on the battery status and whether the unit is plugged into AC power Full Battery icon flashing Battery is charging connected to AC power Full battery icon solid Battery is fully charged not connected to AC power Empty or partial Unit not connected to AC battery needs charging battery icon solid The battery is not user accessible If for any reason your battery no longer charges please contact us NOTE Unit will not charge iPod iPhone while operating on battery power End Of Life Battery Disposal Instructions This device uses a Lithium ion battery that should last the lifetime of the device If you suspect your battery may be dead try charging it several times If the battery does not recharge please contact us for repair information Please do NOT attempt to change the battery yourself If the battery has died and you do not want Manufacturer to replace your battery you should follow the disposal instructions below Consult local laws and regulations for proper battery disposal in your region If there are no local regulations concerning battery disposal please dispose of the device in a waste bin for electronic devices Caution The Battery used in this device may present a risk of fire explosion or chemical burn if mistreated Battery shall not be exposed to excessive heat such as sunshine fire or the2. flat to upright position Connect the AC adaptor to the DC jack on the left side of the iP48 and plug the other end into a working wall socket to charge and play iPod iPhone and to charge internal battery Mesh iPhone 3G iPod touch 2G iPod nano 5G i AE iPhone 3G 3GS iPod touch 2G iPod nano 5G NOTE If you do not have an insert for your iPod please visit www ihomeaudio com or call iHome toll free at 800 288 2 gt 92 to purchase one 4 iPod iPhone os Select the dock insert for your iPod iPhone model from the table above and place insert in dock Press Power Button to ON Unit and iPod iPhone will Never dock an iPod iPhone without an insert in place turn on Adjust volume by pressing the or Button ators ols and indic tr Con Side Panel Speakers Front Panel NES ea Rte Tiny QM X MANN ON SS SORA SR SES pue X INANA SORE ERAN m ENTENDU NN erem SS SRR RE ANN MSS NEN NN ST NS NIST SERRE AN MANNA NUES NNI IN MN SUSAN NIA MANNA SRA ERE ARR SRA SR SEN m SRS SK SERN Sn SN SHON SHE NX Sonne SR SR x AN NS NS m NN MENSIS NS OR E MM Wo M Sane EN ANNONA NN INA SNK ON SRE AN NANAS AR BONN RSEN on BRA SAN E SINN SRN NO N W BR SR E AN NENNEN ARON ESSERE MN pue E M 4 NNNM NY SOAR o RNR NN M MUSS w m BE i Qv ERIN p EIN pM NN NE dp MAN SIR ANS SESE RSE W D
3. shorted recharged exposed to water fire or high temperatures Do not place loose batteries in a pocket purse or other container containing metal objects mix with used or other battery types or store with hazardous or combustible materials Store in cool dry ventilated area Follow applicable laws and regulations for transport and disposal Using iP48 Using Time Sync to Set Clock from iPhone iPod The iP48 allows you to sync its clock with the time setting on the iP48 to the time from your iPhone or recent model iPod Touch iPod Nano and iPod Classic older iPod models such as iPod mini do not support this feature 1 Make sure the iP48 is off Dock your iPhone iPod into the iP48 using the proper insert see table on page 1 2 Press the Button SYNC will flash on the display until sync is completed Two beeps will indicate sync is complete If the time sync function fails please try again or set time manually see below Note The iPhone is constantly updated to current time via cell phone towers The time on your iPod is only accurate to the last time it was synced to a computer It s possible to have up to 59 seconds difference between the iP48 and synced iPhone iPod vee Time and Clock Display Format Manually Press and hold the Button located to the left of the display until the display flashes Press or Button to select 12 Hour or 24 hour clock display format Press the Button again for clock setting
4. 3 Press or Button to adjust to correct time Hold the buttons for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM time The PM Indicator is located on the upper right hand side of the time digits there is no AM indicator Using the Alarm oe the Alarm Press and hold the Button until the current alarm time flashes 2 Press the or Button to set the desired alarm time Hold the buttons for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM time 3 Press the O Button or no button press within 10 seconds to confirm alarm time and exit alarm setting mode The alarm will be armed and the alarm icon will remain on the display indicating the alarm is active NOTE If no iPhone iPod is docked or detected the iP48 will automatically change to buzzer alarm Reviewing and Turning Alarm Function On and Off 1 Press the w Button once to review the set alarm time This also toggles the alarm off the alarm icon will disappear 2 Press the w Button again to re arm the alarm the alarm icon will appear again in the display Resetting the Alarm to Come on the Next Day 1 When the alarm is sounding press the D Button to stop the alarm and reset it to come on the following day Using iP48 Alarm Time Cycle and Snooze Operation Alarm Time Cycle 1 When using AC power the alarm time cycle is 1 hour To save battery power the alarm time cycle is shorter when using batter
5. NA SR NS um Mun m SU SD OO OS Battery eable Recharg Backup in i r t unde rtmen Compal Dock Time Set Time Sync Button on Display Butt tton Alarm Reset Bu Power Alarm Button me ee volume o release isplay dn Bio ae id flip up catc P48 Display i S SS Nm M X M M MN S NENNT ANN M i er Snooze Dimm Button ye ume i volume PM Indicator Alarm Indicator Battery bac skup Display e ry indicator el or trav display down f Press dicato ry Level Batte Getting Started with your iP48 Connecting the AC Adaptor For home operation and to charge your iPhone iPod connect the AC adaptor cable plug into the DC jack located under the black tab on the left side of the unit then plug a 2 the AC adaptor into a working outlet When connected to the AC adaptor the iP48 Pl charges the internal battery and also charges and lets you play your iPod iPhone Q NOTE This 9V AC adaptor is for use with the iP48 only To avoid damage do not use other adaptors with the iP48 Charging the Internal Battery FOR PORTABLE LISTENING When music becomes weak or distorted charge battery The iP48 comes with a rechargeable lithium ion battery for portable use when the unit is not connected to AC power The first time you connect the iP48 to AC power keep it connected for several hours to fully charge the battery
6. cannot control those iPod models or other devices Use the Line in jack to play these devices Press the Menu button on your iPod iPhone iPod iPhone battery is run down or is too weak Charge your iPod iPhone for about 5 minutes Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If iPod iPhone original sound source is poor quality distortion and noise are easily noticed with high power speakers Try a different music file Try reducing the output volume and EQ settings such as bass boost on the device itself Limited 1 Year Warranty Information iHome Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 10 00 charge for handling packing retum UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Ce
7. like Do not use or charge the battery if it appears to be leaking discolored deformed or in any way abnormal Do not leave your battery discharged or unused for extended periods of time When batteries are misused they may explode or leak causing burns and personal injury If your battery leaks use normal precaution and discard the battery immediately Getting Started with your iP48 Recycling Information for Lithium ion Battery Battery Removal Caution Use safety goggles when disassembling your iP48 1 Use Philips screwdriver to remove screw of internal battery compartment located behind the dock 2 Remove battery compartment door 3 Disconnect battery connector 4 Do not place in trash Dispose of battery according to local battery recycling laws Installing Replacing the Backup Battery The iP48 uses a backup battery system to provide continuous alarm operation and Clock settings in the event of a power failure The backup battery is included If the Backup Battery Low Icon located on the upper left of the display is flashing it is time to replace the backup battery Please make sure the AC adaptor is connected otherwise all settings may be lost during battery replacement Open the backup battery compartment cover located at the center of the unit Insert 1 CR2032 battery with the side facing up as indicated Replace battery compartment cover WARNING Lithium batteries can explode or cause burns if disassembled
8. other end of the patch cord into the iP48 Line in Jack located on the left side of the unit under the rubber cover Press the Button The display will show On for a while to show iP48 is on Turn on your audio device and put it in play mode Press the or Button on the iP48 to adjust the volume You may need to adjust your device s volume too To switch off the unit press the C Button The display will show Off for a while the button light will go out and the iP48 will turn off Remember to shut off your device too NOTE Do not play an audio device through the line in jack while an iPhone or iPod is docked or you may hear audio from both IRN Dimmer Operation During normal operation press the Snooze Dimmer Button to cycle the brightness of the display through High Medium Low and Off settings A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 2 10 Ti 12 13 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink la
9. C Information This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules These limits provide reasonable protection against radio and TV interference in a residential area However your equipment might cause TV or radio interference even when it is operating properly To eliminate interference you can try one or more of the following corrective measures Reorient or relocate the receiving antenna ncrease the distance between the equipment and the radio or TV Use outlets on different electrical circuits for the equipment and the radio or TV Consult your dealer or an experienced radio television technician if the problem still exists Modifying or tampering with your system s internal components can cause a malfunction and might invalidate the system s warranty and void your FCC authorization to operate it This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada iP48 Quick Start 1 Unzip unit l 2 AC adaptor Unzip the iP48 to open the unit Press the Display Button to release the pop up display from travel mode
10. Model iP48 a ES besos 5 SSSSSSSSS SSSSOSS for your iPhone iPod portable rechargeable speaker system t www ihomeaudio com isi Questions V Table of Contents iP48 RS 1 Controls and Indicators 58 58 5888 2 Getting Started with your iP48 222 222 2 2555 52225 eee eee 3 4 Using the iP48 5 6 A Consumer Guide to Product Safety 7 Trouble Shooting 8 Warranty Information e ee oe ce se He re ee 9 sas srs and GENET are registered trademarks of SRS Labs Inc TruBass and WOW technologies are incorporated under license from SRS Labs Inc LESTIE CS a Place the unit on a level surface away from sources of direct sunlight or excessive heat Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzene thinner or similar materials can damage the surface of the unit FC
11. ack of the dock Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Wall outlet is not functioning or switched off Plug another device into the same outlet to confirm the outlet is working Make sure any associated power switch is ON Internal battery is weak or dead Connect to AC power until battery status indicator is solid iPod iPhone does not dock properly Using no or wrong iPod iPhone insert Make sure the dock insert is the proper fit for your iPod iPhone iPod iPhone not installed properly Remove your iPod iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod iPhone Make sure there is no skin or case on the iPod iPhone Then reseat it in the dock iPod iPhone does not respond to the unit iPod iPhone does not come on immediately iPod iPhone is not installed properly Remove your iPod iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod Then reseat it in the dock Your iPod iPhone software is too old Upgrade software on your iPod iPhone via iTunes iPod iPhone is locked up Using 1st or 2 generation iPod iPod shuffle or other devices If your iPod iPhone is not used for some time it may enter deep sleep mode Please make sure your iPod iPhone is working properly before docking into the unit Please refer to your iPod iPhone manual for details Unit
12. ect the antenna or cable System during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihomeaudio com or call 1 800 288 2792 Toll Free 7 Trouble Shooting Symptom Possible Problem Solution Unit doesn t respond no power AC adaptor isn t plugged into a wall outlet or the connector is not plugged into the power supply jack on the b
13. his warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI Technologies or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product 2010 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com or call 1 800 288 2792 Toll Free iP48 012210 A Printed in China
14. nter listed below The product must include proof of purchase including date of purchase The fee for service without proof of purchase is 45 00 Before retuming this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 2 3 Enclose a check or money order payable to the order of SDI Technologies for the sum of 10 00 45 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Drive El Paso TX 79936 6420 Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons i cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its retum to the owner T
15. undry tub swimming pool or in a wet basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket Cleaning The unit should be cleaned only as recommended See the Maintenance section of this manual for cleaning instructions Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product Attachments Do not use attachments not recommended by the product manufacturer Lightning and Power Surge Protection Unplug the unit from the wall socket and disconn
16. y power iPhone iPod alarm cycle is 15 minutes and wake to buzzer is 3 minutes during battery operation 2 Press the Snooze Dimmer Button after the alarm sounds The alarm will be silenced and come on again after 9 minutes Snooze can be pressed several times during the alarm time cycle Sure Alarm The iP48 has a sure alarm feature If the backup battery is installed the buzzer alarm will still sound in the event of a power failure Charging your iPhone iPod Note Please make sure you are using the correct insert for your iPhone or iPod see Install iPod Insert and that it is properly docked into the iP48 Failure to do so may damage your iPod 1 While your iPhone or iPod is docked in the unit and the unit is connected to AC power it recharges until fully charged Note that other non docking iPods will NOT charge maying your iPhone iPod Press the Button to play iPhone iPod The power button will light up and the display will show On briefly to indicate the iP48 is on Press the or Button to adjust the volume To skip tracks or select different artists albums genres etc use the controls on your iPhone or iPod 4 To turn the unit off press the I Button Display will show Off for a while the button light will go out and both the iP48 and your iPhone iPod will turn off on ae the Line in Jack Plug one end of the audio patch cord not included into the headphone or line out jack on your audio device and the
Download Pdf Manuals
Related Search