Ultra U12-42125 computer case
Contents
1. 3 4 Installing 2 5 HDD 1 Locate 4 mounting holes at the bottom 2 Secure 2 5 HDD with screws provided http www ultraproducts com register Thank you for your recent purchase of an ULTRA Product An on line option to register the product is available at www ultraproducts com register 2012 Streak Products Inc ULTRA and Xblaster are registered trdemarks of Streak Products Inc2. Ulitra U12 42125 U12 42350 User Manual Right Side Rear Fan Demo only Left Side USB 2 0 Connection Connect to USB 2 0 header on your motherboard Pin Signal Names Pin Signal Names USB Power 1 USB Power 2 Negative Signal Negative Signal 2 Positive Signal 1 O6 Positive Signal 2 7 CGrowmd 8 Ground 2 9 Key No Connecion 10 Empty Pin USB 3 0 Connection Optional Connect to USB 3 0 header on your motherboard If your motherboard does not support USB 3 0 you may connect to USB 2 0 header via a converter cable Cable is not included USB 3 0 is backward compatible with USB 2 0 However data transmission speed will be at USB 2 0 speed eSATA Pin out m GND eSATA Connection Optional m TXP Connect to a standard SATA port on your motherboard O Listed m RXN m RXP m GND HD Audio Connection Connect to the audio port header on your motherboard or sound card The HD audio ports comply with Intel HD standard Consult your motherboard or sound card manual for pin out positions if needed HD Audio Pin out PORT1L E E AUD GND PORT1R E E PRESENSE PORT2R E E SENSE1_RETURN SENSE_SEND _ NOPIN PORT2L W E SENSE_RETURN Power Switch Reset Switch HDD amp Power LED Connection There are 4 connectors marked POWER SW RESET SW HDD LED PLED PLED Consult your motherboard manual for pin header locations and connect accordingly For LEDs positive wire col
3. or coded while negative wire is either white or black If LED does not light up when the system is on try reversing the connection Figure Parts Name Q ty Used for am Pan Washer Screw 16 For Motherboard 3 5 HDD Padlock Copper Stand OF 7 Motherboard um Hexagon Screws 8 For 5 25 ODD 25 HDD Card Reader Hexagon Screws 2 Spare for PCI Card Step Screws 5 For 3 5 HDD right side screw hole ee PCI Slot l Spare for rear O plate Padlock For Lock device Nut Setter Motherboard Installation Buzzer Motherboard Alarm footstand 4 For chassis footstand Installing 5 25 Device 1 Remove front bezel from chassis and bay cover from front bezel Punch out 5 25 metal plate if needed Remove tool less lock by turning it counter clockwise Slide device into drive cage until mounting holes align and device is flush with front bezel Insert tool less lock and turn it clockwise to lock Or use screws to secure it me ere Installing 3 5 Device Card Reader into Open Bay 1 Align card reader with front bezel 2 Secure it with screws on both sides Installing 3 5 Device HDD into Hidden Bay 1 Locate rail screws from tool box There are 5 such black screws in a separate bag marked Rail Screws 2 Install one rail screw DIRECTLY onto HDD s MIDDLE mounting hole on the RIGHT SIDE ONLY 3 Slide HDD into drive bay and secure it with tool less lock or screws
Download Pdf Manuals
Related Search