B&B Electronics DS-PCI-100
Contents
1. 4 Click OK then close Device Manager to save the changes Follow steps 1 4 again to change the other serial port number if needed May 07 7 MN20000000842. DS PCI 100 User Manual Ver 2 00 All brand names and trademarks are properties of their respective owners May 07 1 MN2000000084 Features and Benefits Features Supports 2 x 16550 Fast UART serial Ports Serial data transfer rate up to 115200bps Easy Plug and Play Automatically selects IRQ amp I O address Supports Windows 2000 XP Server 2003 Vista Bus PCI2 1 32bit 33MHz Connectors 2 x DB9 male serial connectors Package Contents 1 x DS PCI 100 Card o 1 x Driver CD System Requirements Windows 2000 XP Server 2003 Vista Available PCI slot May 07 2 MN2000000084 Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCI slot 4 To install the card carefully align the card s bus connector with the selected PCI slot on the motherboard Push the board down firmly 5 Replace the slot bracket s holding screw to secure the card 6 Replace the computer cover and reconnect the power cord Driver Installation Please make sure the board is installed before proceeding with driver installation For Windows 2000 1 At the Found New Hardware Wizard click Next 2 Select Search for a suitable driver for my device recommended and click Next 3 Check Specify a location uncheck the other boxes then click Next 4 Insert the Driver CD type in the foll
3. owing path May 07 3 MN2000000084 D Drivers PCI NDS QS HS PCI 100 2000 then click OK Change D to match your CD ROM driver letter 5 Click Next and Finish 6 Restart Windows to complete the installation For Windows XP 1 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next 2 Insert the Driver CD check Include this location in the search uncheck the other box type in the following path D Drivers PCINDS QS HS PCI 100 XP then click OK Change D to match your CD ROM drive letter 3 Ifthe Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility 4 Repeat steps 1 3 two more times 5 Restart Windows to complete the installation For Windows Server 2003 l At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next May 07 4 MN2000000084 Insert the Driver CD check Include this location in the search uncheck the other box type in the following path D Drivers PCI DS QS HS PCI 100 2003 then click OK Change D to match your CD ROM drive letter If the Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility Repeat steps 1 3 two more times Restart Windows to complete the installation For Windows Vista l 5 A
4. t the Found New Hardware Wizard select Locate and install driver software recommended Click on I don t have the disc Show me other options Select the option Browse my computer for driver software advanced Insert the driver CD check Include subfolders type in the following path D Drivers PCINDS QS HS PCI 100 Vista32 then click Next Change D to match your CD ROM drive letter If the system prompts the user informing the drivers are not May 07 5 MN2000000084 6 signed select the option Install this driver software anyway Click on Close to complete the driver installation To Verify Windows Driver Installation 1 Right click My Computer then click Manage Click Device Manager 2 Click on the plus sign in front of Ports COM amp LPT two MosChip PCI Serial Port should be displayed 3 Double click Multifunction adapters MosChip PCI Multi l O Controller should be displayed Change COM Port Number Some serial devices need a specific COM port in order to work If your serial device works properly do not change this setting For Windows 2000 XP Server 20003 Vista Installation From the Device Manager window double click Ports COM amp LPT then double click the MosChip PCI Serial Port you want to change Click Settings tab and then click Advanced Click the down arrow that is next to the COM Port Number box May 07 6 MN2000000084 select a COM port that is not in use then click OK
Download Pdf Manuals
Related Search