AccuBANKER AB4000 money counting machine
Contents
1. dusty or damaged your authorized service center for repair E3 MG UV MG sensor error Clean the sensors or contact model only your authorized service center for repair E4 UV and UV sensor error Clean the sensors or contact MG UV mod your authorized service center for repair Hopper sensor error Clean the sensors or contact your authorized service center for repair Stacker sensor error Clean the sensors or contact your authorized service center for repair SSeS hu ssmuzpi Error Messages and their Meaning CFI UV UV suspicious Remove the suspected and MG UV banknote detected banknote from the stacker models only and recheck CF2 MG MG suspicious Remove the suspected UV model banknote detected banknote from the stacker only and recheck Chain detection Remove chained notes and check thickness adjusting screw Section 5 0 Eh Half detection Remove the half note and recheck EJ Jam detection Remove all banknotes from the hopper and stacker Check the thickness adjust ing screw and recount the bills Section 5 0 7 0 Specifications HP Empty hopper Place banknotes in the hopper and restart St Stacker obstruction Check the stacker sensor for dust or obstructions Once cleared recount d E Double note detec Remove chained notes tion and check thickness adjusting screw Section 5 0 7 0 Specifications Ambient Temperature 32 F 104 F 0 C 40 C Ambient Humi2. AccuBANKER because your money counts USA Digital Bill Counter AB4000 Warning Before turning the power on please make sure there are no objects obstructing the operation of the rollers and wheels Operate the machine only under normal temperatutres AccuBANKER because your money counts USA AccuBANKER and its logo are registered trademarks or trademarks of Hilton Trading Corp All Rights Reserved Table of Contents Getting Started Basic Instructions Important Safety Instructions Other Safety Considerations Box Contents Cleaning of the Machine 1 0 General Controls and Parts 1 1 Specific Controls 2 0 Features 2 1 Count Mode 2 2 Batch Function 2 3 ADD Function 2 4 Automatic Start 2 5 Counterfeit Detection 2 6 Speed 3 0 4 0 5 0 6 0 7 0 Table of Contents Cont Operations 3 1 Power Up 32 Mode Selection 3 3 Count Function 3 4 ADD Function 3 5 Batch Function 3 6 Counterfeit Detection Functions 3 7 External Display 3 8 Emergency Stop Button Troubleshooting Operational Problems 4 1 Avoiding Problems 4 2 Jamming Maintenance of the Machine 5 1 Thickness Adjusting Screw Error Messages and Their Meaning Specifications FT Basic Instructions The AB 4000 Series low cost front loading banknote counter provides a simple and agile manner for counting money It provides effective accurate and reliable counting of banknotes along with optional counterfeit detection This manual has be
3. Banknotes with metal clips Banknotes with adhesive media Washed banknotes e Torn or ripped banknotes sn Operational Problems Cont 4 2 Jamming Before beginning operation of the machine make sure there are no foreign objects in any ofthe mechanisms such as silica bags spare parts etc To avoid jamming ensure that banknotes are placed correctly in the machine If jamming occurs turn the machine off Carefully remove the jammed banknotes from the machine with a wooden or rubber stick Look for any foreign objects such as paper clips staples rubber bands etc and remove them if necessary Sl Maintenance of the Machine 5 1 Thickness Adjustment Screw The thickness gap is very important to ensure smooth and accurate count ing The gap is calibrated and set at the factory Adjustments should only be made when persistent errors are encountered or as instructed by an authorized service technician Using a coin edge or flat head screwdriver turn the thickness adjustment knob toward the left or when EC or Ed messages appear frequent ly with chained or doubled banknotes If excessive jamming and Ej error occurs turn the knob toward the right or to open the gap Error Messages and their Meaning Seltest Codes Left counting sensors are Clean the sensors or contact dusty or damaged your authorized service center for repair Right counting sensors Clean the sensors or contact are
4. ctions will expose you to severe fatal risks which since already disclosed will be the sole responsibility of the user Box Contents When opening the box verify that all of the items described below are included If any item is damaged or missing contact the place where the unit was purchased 2 Cleaning of the Machine WARNING BEFORE DOING ANY CLEANING TURN THE POWER SWITCH OFF AND DISCON NECT THE POWER CORD FROM THE MACHINE KEE P IN MIND THAT PROBLEMS OR DEFECTS THAT ARISE FROM LACK OF PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARANTY A Cleaning the Optical Sensors It is important to clean all of the sensors in the unit to avoid any paper par ticles or dust from sticking to the light emitting or light receiving sensors This should be done everyday if possible The glass surfaces of the sen sors may be wiped with a soft cloth soaked with alcohol B Cleaning the Inside of the Machine Periodically It is necessary to clean the inside ofthe machine once a month or when needed Unplug the machine and lift the top cover to gain access to the interior Blow any dust or paper particles out with a can of compressed air such as AccuClean C Additional Recommendations Avoid operating the machine in a dusty or dirty room To guard the ma chine from the elements always keep it protected with the supplied cover when not in use BEE EEE EEE 1 0 General Controls and Parts Display Hopper Hopper Gui
5. des Stacker Catch Plate External Display Power Switch External Display outlet Thickness Adjusting Screw 10 Power cord Oulet 11 Handle General Controls and Parts 1 1 Specific Controls 1 Numeric key pad 0 9 2 ADD 3 MNL manual start 4 UV available on AB4000 UV and AB4000 MG UV models only 5 MG available on AB4000 MG UV model only 6 Speed selection 7 Counting Number Display 8 Batch Number Display 9 Restart 8 1 A 2 0 Features 2 1 Count Mode This is the default mode The machine will count all banknotes placed in the hopper 2 2 Batch Function Batch Counting in any range from 999 2 3 ADD Function This function adds and totals all consecutive opera tions up to 9999 Removing the banknotes from the stacker will not reset the count to 0 2 4 Automatic Start The machine begins counting automatically when banknotes are placed in the hopper To disable this function or use Manual start press the MNL button 2 5 Counterfeit Detection Check banknotes for counterfeits while count ing with UV and or MG counterfeit detection UV detection can be used for most currencies while MG is best suited for currencies that use mag netic ink 2 6 Speed The AB4000 Series has 3 variable speeds approximate Fast F 1200 pcs min Normal N 900 pcs min Slow S 600 pcs min oc vm _ 3 0 Operatio
6. dity 30 80 R H Feeding System Roller Friction System Hopper Capacity 300 eStacker Capacity 200 Size of Countable Banknotes 50 mm X 115 mm 85 mm X 175 mm Thickness of Countable Banknotes 0 06 0 12 mm Counting Number Display Four Digits Red LED Batch Number Display Three Digits Green LED Power Source Single Phase 110 V 60 Hz or 220 V 50 Hz Power Consumption lt 60 Watts Dimensions 10 5 W X 9 7 D X 9 5 H 270 mm X 248 mm X 245mm Weight 15 Ib 6 8 kg Counting Speeds approximate 600 900 1200 pcs min Notes Notes AccuBANKER because your money counts
7. en compiled to provide complete and clear instructions for operating the machine Before using the machine read this manual thoroughly Pay special attention to Sections 1 0 3 0 in order to familiarize yourself with the functions and opera tions of the machine There are three models in the AB4000 series AB4000 Basic model A range of functions including count add batch and vari able counting speeds AB4000 UV model In addition to the functions of the basic model there is ultraviolet UV counterfeit detection function AB4000 MG UV In addition to the functions of the basic model there are two counterfeit detection functions ultraviolet UV and magnetic MG Important Safety Instructions When using this bill counter basic safety precautions should always be followed to re duce the risk of fire electric shock or injury to persons including the following Warning Caution Do not use this product in areas where it may be exposed to water or other liquids Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning When unplugging the power cord do not pull it by the cord but rather grip the plug to pull it out Not following these instructions may result in electric shock fire or damage to the unit To reduce the risk of electric shock do not disassemble this product Take it to qualified service person
8. nel when service or repair work is required Opening or removing covers may expose you to dangerous voltages or other risks Incorrect re assembly can cause electric shock when the appliance is subsequently used Do not use the unit if the power cord is damaged or if the plug socket contact is loose Not following these instructions may result in electric shock fire or other hazards Only use the cable provided with the unit The use of other cables may result in electric shock fire or cause serious damage to the unit Do not place heavy objects over the cord and do not bend it excessivel since it could get damaged Not follwoing these instructions may result in electric shock fire or other hazards S Do not operate the unit in areas with high temperature or high humidity since it may prevent it from working correct ly 0 OO When not using the unit for a long period of time remove the power plug from the wall outlet gg yes Other Safety Considerations e Read and understand all of the safety instructions e Follow all warnings and instructions marked on the unit e This product should never be placed near or over a radiator or heater register This product should not be placed in a built in installation unless proper ventilation is provided e This product should be operated only from the type of power source in dicated in this user s guide If you are not sure of the ty
9. ns 3 1 Power Up Connect the power cord to power outlet and turn the POWER switch ON The unit will conduct a self test diagnostic The counting number display will show 0 when the unit is ready Refer to Section 6 0 for any self test codes 3 2 Mode Selection Press the button corresponding to the desired function ADD UV MG MNL 3 3 Count Function To begin a basic counting function place a stack of banknotes on the hopper The machine will begin counting automatically and deposit the banknotes in the stacker With the MNL button turned on the machine will not start counting until the restart button is pressed 3 4 ADD Function Pressing the ADD button will allow the counted banknotes to be added to all consecutive counted banknotes Totals will be counted up to a value of 9999 SSS AAA Operations Cont 3 5 BATCH Function Set the batch number by pressing the numeric keypad buttons 1 to 9 The selected number s will be displayed in the batch number display Press the clear button to remove the selected batch number and turn off the batch function 3 6 Counterfeit Detection Functions 3 6 1 UV Detection for UV and MG UV models only Press the UV button to turn on the UV detection The corresponding in dicator light will turn on Also the batch number display will show Uv1 Press the UV button once more to increase the sensitivity to Uv2 Pressing the UV button fo
10. pe of power supply in your location consult your dealer or local power company e This product is equipped with a three wire grounding type plug a plug having a third grounding pin 110V models only This plug will only fit into a grounding type power outlet This is a safety feature If you are un able to insert the plug into the outlet contact your electrician to replace the outlet Do not try to defeat the safety purpose of the grounding type plug e Never push objects of any kind into the unit through any openings since they may touch dangerous voltage points or shortcut parts resulting in a risk of fire or electric shock e Never spill liquids of any kind on the product e Unplug this product from the wall outlet and refer to servicing by qualified service personnel under the following conditions When the power supply cord or plug is damaged or frayed If liquid has been spilled into the unit If the unit has been exposed to rain or water If the unit does not operate normally while following the operating instructions Adjust only those controls that are covered by the operating instructions Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation If the product has been dropped or the case has been damaged If the product shows a noticeable change in performance e Not following these safety instru
11. r a third time will turn the detection function and indicator light off 3 6 2 MG Detection for MG UV model only Press the MG button to turn on the MG detection The corresponding indicator light will turn on The batch number display will show NG1 To increase the sensitivity press the MG button again and the display will show NG2 Pressing the MG button for a third time will turn the detection function and indicator light off m Operations Cont 3 7 External Display optional Connect the external display to the back of the machine by the serial cable The external display will replicate the counting number from the counting display on the machine 3 7 Emergency Stop Button In the event of an emergency this feature can be activated manually by depressing the red Emergency Stop Button located on the right side top cover of the machine Once the Emergency Stop feature is activated all operations will be canceled The machine must be turned OFF the foreign objects removed and turned back ON to continue the banknote counting operations sy ir a y 4 0 Troubleshooting Operational Problems 4 1 Avoiding Problems Avoid strong light or magnetic sources that will disturb the counterfeit detection functions Keep the machine clean and free of dust from the sensors Unplug the machine when not in use Pre select the banknotes to be counted in the machine Do not attempt to count e
Download Pdf Manuals
Related Search