Gefen GTB-3DTV-KVM
Contents
1. Gefen TOOLBOX KVM ELR Extender for HDMI SDTV GTB 3DTV KVM GTB SDTV KVM BLK User Manual www gefentoolbox com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Pacific Time Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefentoolbox com support gefentoolbox com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice KVM ELR Extender for HDMI 3DTV is a trademark of Gefen LLC HDMI the 14 31 logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries 2011 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners Rev 1 29 81 13 14 CONTENTS Introduction Operation Notes Features Sender Unit Layout sender Unit Descriptions Receiver Unit Layout Receiver Unit Descriptions Connecting the KVM ELR Extender for HDMI 3DTV DIP Switch Configuration Network Cable Wiring Diagram Wall Mounting Instructions Specifications Warranty INTRODUCTION Congratulations on your purchase of the GefenToolBox KVM ELR Extender for HDMI 3DTV Your complete satisfaction is very important to us About Gefen We specialize in total int2. KVM ELR EXTENDER FOR HDMI 3DTV How to Connect the KVM ELR Extender for HDMI 3DTV Connect the Hi Def source to the Sender Unit using the included HDMI cable Use an HDMI cable to connect the Receiver Unit to an HDTV display Connect the USB host device to the Sender Unit Connect up to two 2 USB devices to the Receiver Unit Connect a CAT 5e or CAT 6 cable between the Link port on the Sender Unit and the Link port on the Receiver Unit Connect another CAT 5e or CAT 6 cable between the USB Link port on the Sender Unit and the USB Link port on the Receiver Unit NOTE If terminating network cables in the field please adhere to the EIA568B specification see page 11 Connect the 5 V DC locking power supplies to the Sender Unit and Receiver Unit Do not overtighten the locking connectors Plug the two 2 AC power cords from the power supplies to available electrical outlets Wiring Diagram for the KVM ELR Extender for HDMI 3DTV 5 LINK CABLE Ed HDMI CABLE m USB CABLE m Receiver Home Theater Multimedia PC 922 HDMI Display SB Printer GTB 3DTV KVM Attention This product should always be connected to a grounded electrical socket 8 DIP SWITCH CONFIGURATION Receiver Unit The Gefen KVM ELR Extender for HDMI 3DTV contains four 4 DIP switches on the bottom of the Receiver Unit the Sender Unit does not contain DIP switches Each of these DIP switches performs a different
3. Not Supported Reserved for future use DIP switch is only operational when using Local EDID DIP 1 OFF 10 NETWORK CABLE WIRING DIAGRAM Gefen recommends the TIA EIA 568 B wiring option Please adhere to the table below when field terminating cable for use with Gefen products CAT 5 CAT 5e and CAT 6 cabling comes in stranded and solid core types Gefen recommends using solid core cabling It is recommended to use one continuous run from one end to the other In some cases connecting through a patch might not work 11 WALL MOUNTING INSTRUCTIONS Lie ery TOOLBUX TOOLBUX ow Pan i i ELA Excandar E Ki ELA Extender for HDMI 5 for HOMI A Use 23 USB2 o The GefenToolBox KVM ELR Extender for HDMI 3DTV Sender Unit and Receiver Unit may be mounted vertically on a wall or in a cabinet with wood drywall screws as shown in the diagram above There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for insertion and retraction of all input and output cables For installation on a drywall surface use a 6 drywall screw It is recommended when installing on a drywall surface that studs be used to secure the Extender should undue stress be applied when connecting and disconnecting cables 12 SPECIFICATIONS een 225 MHz Input V
4. e _ 3DTV Support e Extends USB 2 0 up to 330 feet 100 meters e Supports USB 2 0 480 Mbps e Works with products designed using HDBaseT Specifications e Backward compatible with USB 1 1 devices e IR backchannel e Locking Power Supplies e Surface mountable Package Includes 1 GefenToolBox KVM ELR Extender for HDMI 3DTV Sender Unit 1 GefenToolBox KVM ELR Extender for HDMI 3DTV Receiver Unit 1 6 ft HDMI cable M M 1 6 ft USB cable A B 2 5 V DC Locking Power Supplies 1 User Manual SENDER UNIT LAYOUT Top E 500 gt Du y cs al 2 dn RH gt 0 Left Side 1 2 3 Right Side SENDER UNIT DESCRIPTIONS USB LINK Transmits the USB signals from the Sender Unit to the Receiver Unit using CAT 5e CAT 6 cable LINK Transmits the HDMI and IR signals from the Sender Unit to the Receiver Unit using CAT 5e CAT 6 cable IR Connect an IR Blaster cable Gefen part no EXT 2IREMIT from this port to the Hi Def source to control the source from the viewing location 5V DC Connect the included 5 V DC locking power supply to this connector PWR This LED will glow red once the included 5V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available electrical outlet HDMI In Connect an HDMI cable from the Hi Def source to this HDMI connector
5. USB Indicator This LED glows green when a USB device is connected to the Sender Unit USB In Connects the Sender Unit to the computer or USB host device using a USB cable RECEIVER UNIT LAYOUT Top AMT Bee HA Oc as B ALOE 494 473 WAH Xa Un ec PEE Litt Chast HOW Left Side Right Side RECEIVER UNIT DESCRIPTIONS IR Ext Connect an IR Extender Gefen part no EXT RMT EXTIR cable from this port to the Hi Def source to extend the IR control LINK Transmits the HDMI and IR signals from the Sender Unit to the Receiver Unit using CAT 5e CAT 6 cable USB LINK Transmits the USB signals from the Sender Unit to the Receiver Unit using CAT 5e CAT 6 cable USB Indicator This LED glows green when a USB source is connected to the Receiver Unit USB Output Connectors Connect the USB remote devices such as a keyboard and mouse to these ports IR This IR window receives signals from the Hi Def source IR remote control The IR signals are sent back to the source device when using an IR Blaster on the Sender Unit HDMI Out Connect an HDTV to this HDMI connector PWR This LED will glow red once the included 5 V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available electrical outlet 5V DC Connect the included 5 V DC locking power supply to this connector CONNECTING THE
6. a Long Range technology supporting HDBaseT Specifications allowing multiple signals to travel along the same Cat 5 cable How It Works Place the Sender Unit next to the Hi Def source Use the included HDMI cable to connect the Hi Def source to the Sender Unit Use the supplied USB cable to connect the USB host source device to the USB port on the Sender Unit Con nect the Receiver Unit to the HDTV display monitor or digital signage display with an HDMI cable Connect the USB devices to the Receiver Unit Use two Cat 5 cables up to 330 feet 100 meters to connect the Sender Unit to the Receiver Unit Connect the included locking power supplies to the Sender Unit and Receiver Unit and then connect both power cords to available electrical outlets OPERATION NOTES PLEASE READ THESE NOTES BEFORE INSTALLING OR OPERATING THE KVM ELR EXTENDER FOR HDMI 3DTV CAT 5 or CAT 6 cables should not exceed 330 feet 100 meters Shielded STP CAT 5 or CAT 6 is recommended However un shielded UTP CAT 5 or CAT 6 is acceptable NOTE The shielded cable has an advantage by providing immunity to Electromagnetic Interference EMI cell phones and A C motors The GefenToolBox KVM ELR Extender for HDMI 3DTV features the ability to generate compatible EDID and Hot Plug signals when working with different brands of source devices and displays See page 9 for details FEATURES Features e Extends 1080p Full HD up to 330 feet 100 meters
7. egration for your home theater while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware We invite you to explore our distinct product line Please visit http www gefen com for the latest offerings in High Definition signal solutions or call us between the hours of 8 00 am and 5 00 pm Monday Friday Pacific Time for assistance with your A V needs We ll be happy to assist you Why GefenToolBox The GefenToolBox line offers portable and easy to install solutions for common A V system integration setups using DVI and HDMI connectivity GefenToolBox products are wall mountable and small in size GefenToolBox products are easily transported in the field and are ready for immediate and simple installations in working environments These products come finished in a glossy color to blend in with either a white wall or black cabinet The GefenToolBox KVM ELR Extender for HDMI 3DTV The KVM ELR Extender for HDMI 3DTV extends any Hi Def source and USB to an HDTV display or other digital signage application over a distance up to 330 feet 100 meters using two Cat 5 cables USB 2 0 data rates up to 480 Mbps are supported in addition to backward com patibility with USB 1 1 The Receiver Unit allows the connections of up to two 2 USB devices providing access to printers scanners cameras external storage media digital signage and automated control systems This product uses Gefen ELR Extr
8. function Four DIP switches located on the bottom of the Receiver Unit DIP Switch 1 EDID Mode Default ON e Pass Through Mode DDC and HPD are passed through Both the connection status and the full video capabilities of the monitor are used by the source device OFF Local EDID Mode Local EDID is used instead of the EDID from the display device EDID features newer than HDMI 1 3 are removed when the display is read This provides a general EDID which is compatible with more displays DIP SWITCH CONFIGURATION DIP Switch 2 Hot Plug Detect Default OFF ON HPD Pass Through HPD follows upstream HPD towards the source The HPD signal will reflect the connection status between the display device and the source device the source or monitor is temporarily disconnected then reconnected there will be a delay of 20 30 seconds before the content is restored to the monitor OFF HPD Always High The HPD signal remains high regardless of the downstream HPD state If the source or monitor does not properly handle HPD no picture after connecting reconnecting source or display set this DIP switch to the OFF position DIP Switch 3 Supports DVI Connections Default OFF ON Disable HDCP If a DVI connection is used set DIP 3 to the ON position DVI is supported by disabling HDCP pass through OFF Enable HDCP If an HDMI device is connected set DIP 3 in the OFF position DIP Switch 4
9. ideo SIG NRI RR 1 2 Volts p p Input SiG PRIN E IE RS 5 Volts p p TTL HDMI Connector Sender Receiver Type A 19 pin female USB Connector Senden 1 Type B USB Connector Recewen aan 2 Type A Link Connector Sender 2 RJ 45 Power Supply Sender 5 DC een 10 W per unit max Operating Temperature lessen nnns 0 40 C BS EE LT 3 6 W x 7 5 H x 1 3 D MK een 3 Ibs 13 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disc
10. laimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 14 Rev 1 29 81 MA GTB 3DTV KVMx 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefentoolbox com support gefentoolbox com Qu PB A o This product uses UL listed power supplies
Download Pdf Manuals
Related Search