Premier PBM-250L project mount
Contents
1. information or ordering assistance contact us at the phone address number shown on the front of this page We re Customer Driven INSTALLATION INSTRUCTIONS PBM 250L PROJECTOR MOUNT Supplying the world with superior mounts Progressive Marketing Products Inc 2980 A Enterprise Street Brea Ca 92821 Ph 800 368 9700 Fax 800 832 4888 E mail pmpi pmpi com Web Site www pmpi com2. PBM 250L Projector Mount INSTALLATION INSTRUCTIONS Step 1 Invert the projector and place it on a soft and flat surface Locate the five 5 8 mm mounting points found on the bottom of the projector Align the mounting bracket B to the projector C and secure the bracket with the five 5 8 mm x 35 mm Phillip Screws A Lock Washers D Flat Washers E supplied Do not over tighten See Figure 1 T F1 8 U Step 2 Install the base box securely to the ceiling structure in accordance with proper commercial standards Use commercially available suitable hardware depending on the installation requirements NOTE If the Optional AST 2446 adjustable height suspension adapter is a part of the installation securely install the ceiling adapter to the ceiling at this time Refer to its Installation Instructions U Step 3 Install the two 2 conical spacers L and two 2 flat washers K two 2 hinge pin screws J loosely on both sides of the base box H Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box Install the two 2 angle locking screws I Adjust the angle lock it and then tighten the hinge pin screws See Figure 2 e o OStep 4 Check all the hardware for proper tightness and security Do not over tighten hardware Continue U Step 5 Install t
3. he two 2 conical spacers L and two 2 flat washers K two 2 hinge pin screws J loosely on both sides of the base box H Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box Install the two 2 angle locking screws I Adjust the angle lock it and then tighten the hinge pin screws See Figure 3 F3 Check all hardware for proper tighten and security Progressive Marketing Products Inc PREMIER LINE _LA 053001_ WARNING The ceiling should be capable of supporting a weight of at least five 5 times the projector s or monitor s weight If it cannot the ceiling must be reinforced Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to Failure to do so could result in serious personal injury DESCRIPTION HARDWARE A 8 mm x 35 mm Phillip Screws Sea B PBM 250L Mounting Bracket lea C Projector Not Supplied D Lock washers Sea E Flat Washers Sea F Ceiling Structure See Warning Label G Suitable Hardware Commercially Available H PBB 20RL Base Box lea I 6 mm x 12 mm Angle Locking Screws 2ea J 6 mm x 12 mm Hinge Pin Screws 2ea K Flat Washers 2ea L Conical Spacers 2ea M Suspension Adapter Adjustable Pins 2ea N AST 2446 Suspension Adapter Optional For further
Download Pdf Manuals
Related Search