Home

Axis M1143-L Network Camera

1. EAP identity Enter the user identity maximum 16 characters associated with your certificate Private key password Enter the password maximum 16 characters for the private key Enable IEEE 802 1X Check the box to enable the IEEE 802 1X protocol IEEE 802 1X IEEE 802 1X is a standard for port based Network Admission Control providing secure authentication of wired and wireless network devices IEEE 802 1X is based on EAP Extensible Authentication Protocol To access a network protected by IEEE 802 1X devices must be authenticated The authentication is performed by an authentication server typically a RADIUS server examples of which are FreeRADIUS and Microsoft Internet Authentication Service In Axis implementation the Axis product and the authentication server identify themselves with digital certificates using EAP TLS Extensible Authentication Protocol Transport Layer Security The certificates are provided by a Certification Authority CA You need e a CA certificate to authenticate the authentication server e a CA signed client certificate to authenticate the Axis product To create and install certificates go to System Options gt Security gt Certificates See Certificates on page 35 Many CA certificates are preinstalled To allow the product to access a network protected by IEEE 802 1X 1 Go to System Options Security IEEE 802 1X 2 Select a CA Certificate and a Client Certificate from the lists of instal
2. Action Buttons RSR Click Snapshot to save a snapshot of the video image Right click the video image to save it in JPEG format on your computer This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available Q Enable this button from Live View Config Action Buttons riluminstion Activate or de activate IR illumination from Setup gt Video gt Camera Settings Move the slider to increase or 00 decrease the intensity of the LEDs Enable this button from Live View Config gt Action Buttons AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only See AX S Media Control AMC on page 10 for more information The toolbar displays the following buttons Q The Play button connects to the Axis product and starts playing a media stream O The Stop button stops the media stream The Snapshot button takes a snapshot of the video image The location where the image is saved can be specified Q in the AMC Control Panel Click the View Full Screen button and the video image will fill the entire screen Press ESC Escape on the computer keyboard to cancel full screen view The Record button is used to record the current video stream The location where the recording is saved can be specified Q in the AMC Control Panel PTZ Controls The Live View page also displays Pan Tilt Zoom PTZ controls The administrator can enable disable controls fo
3. Bonjour can be disabled under System Options Network Bonjour Storage SD Card To prevent corruption of recordings the SD card should always be unmounted before it is ejected The Axis product supports SD cards with the following file systems e ext4 recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss To access data stored on the card from the Windows operating system a third party ext4 driver or application is required e vFAT most SD cards are pre formatted with vFAT when purchased If required the SD card can be re formatted to the desired file system To format the SD card 1 Insert the SD card in the SD card slot 2 Go to System Options Storage and click SD Card 3 Click Format and select the desired file system During formatting any previous data stored on the disk will be lost Mounting is done automatically when the card is inserted or when the product is started A manual mount is only required if the card has been unmounted and not ejected and re inserted To unmount the SD card 1 Go to System Options Storage and click SD Card 2 Click Unmount 41 AXIS M1143 L System Options 3 The card can now be removed The SD card is managed on the System Options Storage page Click SD Card to open Storage Management If the card s status shows as failed click Check disk to see if the problem can be found and then try Repair Thi
4. gt Video 640x400 Live View Config PTZ Detectors Camera Tampering Motion Detection Events Recordings System Options About G View All Windows C View Selected Window Motion Detection Windows a motion detection Include Window follow these instructions Go to Detectors Motion Detection 2 Select the Configure Included Windows option and click New Select the new window in the list of windows and enter a descriptive name 3 Adjust the size drag the bottom right hand corner and the position click on the text at the top and drag to the desired position of the window 4 Adjust the Object Size History and Sensitivity profile sliders see Motion Detection Parameters for details Any detected motion within an active window is indicated by red peaks in the Activity window 5 Click Save To exclude parts of the include window select the Configure Excluded Windows and position the exclude window within the include window To delete an include or exclude window select the window in the list of windows and click Del Motion Detection Parameters The parameters controlling motion detection are described in the table below Description Object size relative to window Object memory length Difference in luminance size between background and object High level 100 Only very large objects trigger An object that appears in Ordinary colored objects on motion detection the
5. Home firewall but the essential purpose of the device is the same Enable Disable When enabled the Axis product attempts to configure port mapping in a NAT router on your network using UPnPTM Note that UPnP must be enabled in the product see System Options gt Network gt UPnP Use manually selected NAT router Select this option to manually select a NAT router and enter the IP address for the router in the field If no router is specified the product automatically searches for NAT routers on your network If more than one router is found the default router is selected Alternative HTTP port Select this option to manually define an external HTTP port Enter the port number in the field If no port is entered here a port number is automatically selected when NAT traversal is enabled An alternative HTTP port can be used or be active even if NAT traversal is disabled This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router f you attempt to manually enter a port that is already in use another available port is automatically selected When the port is selected automatically it is displayed in this field To change this enter a new port number and click Save FTP The FTP server running in the Axis product enables upload of new firmware user applications etc The FTP server can be disabled under System Options gt Network gt TCP IP gt Advanced T
6. be tunneled Multicast RTP This method RTP over UDP should be used for live multicast video The video stream is always up to date even if some images are dropped Multicasting provides the most efficient usage of bandwidth when there are large numbers of clients viewing simultaneously A multicast cannot however pass a network router unless the router is configured to allow this It is not possible to multicast over the Internet for example Note also that all multicast viewers count as one unicast viewer in the maximum total of 20 simultaneous connections AXIS Media Control negotiates with the Axis product to determine the transport protocol to use The order of priority listed in the AMC Control Panel can be changed and the options disabled to suit specific requirements H 264 is licensed technology The Axis product includes one H 264 viewing client license Installing additional unlicensed copies of the client is prohibited To purchase additional licenses contact your Axis reseller MJPEG This format uses standard JPEG still images for the video stream These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion The Motion JPEG stream uses considerable amounts of bandwidth but provides excellent image quality and access to every image contained in the stream The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS Medi
7. cgilink web link Name Custom link 4 URL http Output Buttons Qutputt 0 Default Viewer for Browsers From Live View Config Default Viewer select the default method for viewing video images in your browser The product attempts to show the video images in the selected video format and viewer If this is not possible the product overrides the settings and selects the best available combination 19 AXIS M1143 L Live View Config Windows Internet Explorer Recommended viewer in Internet Explorer H 264 Motion JPEG Java applet A slower imaging alternative to AMC Motion JPEG Requires one of the following installed on the client e JVM J2SE 1 4 2 or higher e JRE J2SE 5 0 or higher Still image Displays still images only Click the Refresh button in your browser to view a new image Other browsers Server Push Recommended viewer for other browsers Motion JPEG Java applet A slower imaging alternative to Server Push Motion JPEG only Still image Displays still images only Click the Refresh button in your browser to view a new image For more information please see the online help Q Viewer Settings To configure options for the viewer go to Live View Config Viewer Settings e Select Show viewer toolbar to display the AXIS Media Control AMC or the QuickTime viewer toolbar under the video image in your browser e H 264 decoder installation The administrator can disable installation of the H
8. minutes and seconds during which the trigger should be ignored before the action rule can be activated again The recording Duration of some actions can be set to include time immediately before and after the event Select Pre trigger time and or Post trigger time and enter the number of seconds When While the rule is active is enabled and the action is triggered again during the post trigger time the recording time will be extended with another post trigger time period 28 AXIS M1143 L Events For more information see the online help O Recipients Recipients receive media files and notification messages The following recipients are available Email Send Images Send Notification FTP Send Images HTT TCP te Network Share Send Images Send Notification P Send Images Send Notification A network share can also be used as a storage device for recorded video Go to System Options Storage to configure a network share before setting up a continuous recording or an action rule to record video See Sforage on page 41 for more information about storage devices To add a recipient 1 Go to Events Recipients and click Add 2 Enter a descriptive name 3 Select a recipient Type 4 Enter the information needed for the recipient type 5 Click Test to test the connection to the recipient 6 Click OK Schedules Schedules can be used as action rule triggers or as additional conditions for example to reco
9. 1 Go to Recordings Continuous 2 Select Enabled 3 Select type of storage device from the Disk list 4 Select a Stream profile to use for continuous recordings 5 Click Save to save and start the recording 31 AXIS M1143 L Recordings If a new stream profile is selected while a recording is ongoing the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings 32 AXIS M1143 L System Options System Options Security Users User access control is enabled by default and can be configured under System Options Security Users An administrator can set up other users by giving them user names and passwords It is also possible to allow anonymous viewer login which means that anybody may access the Live View page The user list displays authorized users and user groups access levels Viewer Access to the Live View page Operator Access to the Live View page and to all settings except System Options Administrator Unrestricted access to all settings can add modify and remove other users Under HTTP RTSP Password Settings select the type of password to allow You may need to allow unencrypted passwords if there are viewing clients that do not support encryption or if you upgraded the firmware and e
10. 264 decoder included with AXIS Media Control This is used to prevent installation of unlicensed copies Further decoder licenses can be purchased from your Axis reseller Select Show crosshair in PTZ joystick mode to enable a cross that will indicate the center of the image in PTZ joystick mode e Select Use PTZ joystick mode as default to enable joystick mode The mode can be changed temporarily from the PTZ control panel Select Enable recording button to enable recording from the Live View page This button is available when using the AMC viewer The recordings are saved to the location specified in the AMC Control Panel See AX S Media Control AMC on page 10 User Defined Links To display user defined links in the Live View page select the Show custom link option give the link a name and then enter the URL to link to When defining a web link do not remove the http from the URL address Custom links can be used to run scripts or activate external devices connected to the product or they can link to a web page Custom links defined as cgi links will run the script in the background in a hidden frame Defining the link as a web link will open the link in a new window Output Buttons External 1 0 devices connected to the Axis product s output ports can be controlled directly from the Live View page To display output buttons in the Live View page 1 Go to Setup Live View Config 2 Under Output Buttons select the type o
11. MJPEG v The pixel counter shows the number of pixels in an area of the image The pixel counter is useful in situations where there is a requirement that the image is a certain size for example in face recognition The pixel counter can be accessed from Video gt Video Stream Under Preview click Open and select the Show pixel counter option to enable the rectangle in the image Use the mouse to move and resize the rectangle or enter the number of pixels in the Width and Height fields and click Apply The Live View page in Internet Explorer in Windows Right click in the image and select Pixel counter Use the mouse to move and resize the rectangle 14 AXIS M1143 L Setting Up the Product Image The default image settings can be configured under Video Video Stream Select the Image tab The following settings are available e Resolution Select the default resolution e Compression The compression level affects the image quality bandwidth and file size of saved images the lower the compression the higher the image quality with higher bandwidth requirements and larger file sizes e Rotate image If required the image can be rotated Mirror If required the image can be mirrored e Maximum frame rate To avoid bandwidth problems the frame rate allowed to each viewer can be limited e Overlay settings See Overlay on page 17 Click Save to apply the new settings H 264 H 264 also known as MPEG 4 Part 10
12. a network cable to connect to the network IPv4 Address Configuration By default the Axis product is set to use IPv4 IP version 4 and to obtain the IP address automatically via DHCP The IPv4 settings are configured under System Options gt Network gt TCP IP gt Basic DHCP Dynamic Host Configuration Protocol allows network administrators to centrally manage and automate the assignment of IP addresses DHCP should only be enabled if using dynamic IP address notification or if the DHCP can update a DNS server It is then possible to access the Axis product by name host name If DHCP is enabled and the product cannot be accessed run AXIS IP Utility to search the network for connected Axis products or reset the product to the factory default settings see page 44 and then perform the installation again To use a static IP address check Use the following IP address and specify the IP address subnet mask and default router IPv6 Address Configuration If IPv6 IP version 6 is enabled the Axis product will receive an IP address according to the configuration in the network router To enable IPv6 go to System Options gt Network gt TCP IP gt Basic Other settings for IPv6 should be configured in the network router ARP Ping The IP address can be set using ARP and Ping For instructions see the product s Installation Guide ARP Ping is enabled by default To disable uncheck the box under System Options gt Network gt TCP
13. administrator root must be changed before the product can be used If the password for root is lost the product must be reset to the factory default settings by pressing the button located in the product s casing Please see the user documentation for more information ONVIF will be disabled To enable ONVIF go to Setup gt System Options gt Security gt ONVIF AXIS M1143 L Accessing the Product The Live View Page The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences Consequently some of the examples and functions featured here may differ from those displayed in your own Live View page The following provides an overview of each available control Controls on the Live View Page aprofe The Stream Profile drop down list allows you to select a customized or pre programmed stream profile Stream profiles are configured under Video gt Stream Profiles See Stream Profiles on page 15 H 264 Quality Balanced Bandwidth Mobile Output 11 Click Pulse to activate the output for a defined period of time such as switching on an external light for 20 seconds Q Output 1 Click the Active Inactive buttons to manually start and stop a connected device e g switch an external light Q9 on and off Trigger The Manual Trigger button is used to trigger an action rule from the Live View page see Enable this button Q9 from Live View Config
14. dealer reserves the right to charge for any repair attributable to faulty upgrade by the user Preconfigured and customized settings are saved when the firmware is upgraded providing the features are available in the new firmware although this is not guaranteed by Axis Communications AB Server Maintenance o Maintain Server gt Basic Setup gt Video Restart Restart the AXIS M1144 Network Camera gt Live View Config Restore Resets all parameters except the IP parameters to the original factory settings gt PTZ Default Resets all parameters to the original factory settings gt Detectors Upgrade Server gt Events Upgrade the AXIS M1144 with the latest firmware Recordings Specify the firmware to upgrade to Browse and click Upgrade Note Do not disconnect power to the unit during the upgrade The unit restarts automatically v System Options after the upgrade has completed 1 10 minutes Security Identify Date amp Time B Network Flash LED for 10 seconds 1 60 Storage Ports amp Devices Maintenance Support Advanced About Emergency Recovery Procedure If power or network connection is lost during the upgrade the process fails and the product becomes unresponsive Flashing red Status indicator indicates a failed upgrade To recover the product follow the steps below The serial number is found on the product s label 1 In UNIX Linux type the follow
15. different in H 264 and Motion JPEG Lower frame rate than expected Why do not get maximum frames per second Image degeneration Check that the relevant H 264 connection methods and correct interface are enabled in the AMC Control Panel streaming tab See AX S Media Control AMC on page 10 In the AMC Control Panel select the H 264 tab and click Set to default H 264 decoder Check that RTSP is enabled under System Options Network TCP IP Advanced Check with your network administrator that the multicast addresses used by the Axis product are valid for your network Check with your network administrator to see if there is a firewall preventing viewing Check if your router supports multicasting or if the router settings between the client and the product need to be configured The TTL Time To Live value may need to be increased Color depth set incorrectly on clients Set to 16 bit or 32 bit color If text overlays are blurred or if there are other rendering problems you may need to enable Advanced Video Rendering from the Video tab in the AMC Control Panel Ensure that your graphics card is using the latest driver The latest drivers can usually be downloaded from the manufacturer s website Modify the settings for your graphics adapter Refer to the adapter s documentation for more information Reduce the number of applications running on the client computer Limit the number of simultaneous viewers Chec
16. do this select the Include text check box option under Overlay Settings and enter the modifier b in the field MJPEG Sometimes the image size is large due to low light or complex scenery Adjusting the maximum frame size helps to control the bandwidth and storage used by the Motion JPEG video stream in these situations Setting the frame size to the Default setting provides consistently good image quality at the expense of increased bandwidth and storage usage in low light Limiting the frame size optimizes bandwidth and storage usage but may give poor image quality To prevent increased bandwidth and storage usage the maximum frame size should be set to an optimal value Stream Profiles A stream profile is a set of pre configured stream settings including resolution compression frame rate and overlay settings Stream profiles can be used e When setting up recording using action rules see Events on page 27 e When setting up a continuous recording see Continuous Recording on page 31 e In the Live View page select the stream profile from the Stream profile drop down list 15 AXIS M1143 L Setting Up the Product Four pre programmed stream profiles are available for quick set up Each pre programmed profile has a descriptive name indicating its purpose If required the pre programmed stream profiles can be modified and new customized stream profiles can be created To create a new profile or modify an existing profile
17. to trigger the rule see Detectors Hardware Day Night Mode trigger the rule when the product switches between day mode IR cut filter on and night mode IR cut filter off This can for example be used to control an external infrared IR light connected to an output port Motion Detection trigger the rule when motion is detected see Motion Detection on page 24 Tampering trigger the rule when tampering is detected see Camera Tampering on page 24 Network trigger the rule if network connection is lost or restored This can for example be used to start recording to the SD card Temperature trigger the rule if the temperature falls outside or inside the operating range of the product This can for example be used to send maintenance notifications Input Signal PTZ Storage System Time Digital Input Port trigger the rule when an I O port receives a signal from a connected device see 0 Ports on page 42 Manual Trigger trigger the rule using the Manual Trigger button in the Live View page see Controls on the Live View Page on page 8 This can for example be used to validate actions during product installation and configuration Moving trigger the rule when the camera view moves due to a PTZ operation This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation Preset
18. unmounted before removal To unmount go to Setup System Options Storage SD Card and click Unmount Control button The control button is used for AXIS M1143 L Hardware Overview e Connecting to an AXIS Video Hosting System service See page 37 To connect press and hold the button for about 1 second until the Status LED flashes green e Connecting to AXIS Internet Dynamic DNS Service See page 38 To connect press and hold the button for about 3 seconds e Resetting the product to factory default settings See page 44 1 0 terminal connector Use in applications for e g motion detection event triggering time lapse recording and alarm notifications In addition to an auxiliary power and a GND pin the I O terminal connector provides the interface to Digital output For connecting external devices such as relays and LEDs Connected devices can be activated by the VAPIX Application Programming Interface output buttons on the Live View page or by an Action Rule The output will show as active shown under System Options Ports amp Devices if the alarm device is activated e Digital input An alarm input for connecting devices that can toggle between an open and closed circuit for example PIRs door window contacts glass break detectors etc When a signal is received the state changes and the input becomes active shown under System Options gt Ports amp Devices LED Indicators Color Indication Netwo
19. window triggers motion ordinary backgrounds trigger detection for a long time motion detection before it is considered as non moving Medium level 50 large difference in luminance is required to trigger motion detection 25 AXIS M1143 L Detectors Low level 0 Even very small objects trigger An object that appears in Only very bright objects on motion detection the window triggers motion a dark background trigger detection only for a very short motion detection time before it is considered as non moving Recommended values 5 15 60 90 75 95 To trigger on small objects or movements use several small motion detection windows rather than one large window and select a low object size To avoid triggering on small objects select a high object size f no objects should appear in the Include Window select a high history level This will cause motion detection to trigger as long as the object is present in the window Toonly detect flashing light select a low sensitivity In other cases high sensitivity is recommended 26 AXIS M1143 L Events Events The Axis product can be configured to perform actions when different events occur for example start a recording when motion is detected The set of conditions that defines how and when the action is triggered is called an Action Rule Available Action Rule triggers and conditions include Applications use installed applications
20. 17 Privacy Mask suele eurem tei eR repr E Dea heathen xe ra 18 Live View Config ere nee rie wus doe WR RE eee e ewe ie E 19 PIZ Pati Til ZOOM Scene date x a Ro MR wad Cow RC a e wales 22 Preset POSITIONS ceueseke eru Red RE RR ERRARE awa gen ea eR 22 Guard Tour jesse rre RH liuliuadadeesteniviNeesetendan Fia 22 AUVance uem eek edge gee OR ph ERE Y ARX E OR Xe 23 Detectors cb ccc occetase EE Dac EE REN RARE REA GR XAR EGRE 24 Camera Tampering 2 24 Motion Detection sasen uu e Lee RER gode dat Ret RR De den 24 Events jozeerkel ew RE WeRRRTAPEVE remets secs coeurs 27 Setting Up an Action Rule 28 RECIDICNIS guste ei vac erate T 29 Schedules 22 dex ane Tx aec Sadness Rei ba Des crashes 29 HOCHITETEBS casi a ee uc Coe nn ooa dota acte ei URS iC MR ee dod ac e 29 i o eI 31 Recording LISE six di redes d CX ER D mnt E and Rea edes Boh Ys ees 31 Continuous Recording 31 System OBLIONS rest snra ant nna e EE weciE DRE EE TEE dE 33 SECULI AL a IC ia ICI EE IM aan th acne 33 Date E TIME e TT 36 INCE WOMK Tr 37 More itera tetera eh ce E E E Mims dase ata oe 41 Ports Et DEVICES ass sack ek mea ee dedans aa GR AR dau pete 42 Maintenance 5424224 tated noeh eds tok weed ete ah ee UR RA na 42 SUDDOFt assess coche RR Ee eee eid bee ewe ed bade as ORG ee Bn 43 Advanced cu oo eke rr Ult ease EP PR LUE M ok 44 Reset to Fac
21. 7 3 Date amp Time See page 36 4 Video Stream See page 74 5 Focus See The Basic Setup menu can be disabled from System Options gt Security gt Users 13 AXIS M1143 L Setting Up the Product Video It is possible to configure the following video features in your Axis product Video stream See page 74 Stream profiles See page 15 Camera settings See page 76 View area See page 17 Overlay image See page 17 Privacy mask See page 18 Video Stream You can define the following video stream settings from Video Video Stream Image See page 75 H 264 See page 75 gt Basic Setup Video Video Stream Stream Profiles Camera Settings View Area Overlay Image Privacy Mask Live View Config gt PTZ gt Detectors gt Events gt Recordings gt System Options About Pixel Counter Video Stream Settings Image H 264 Image Appearance Resolution 800x600 4 3 v pixels Compression 30 0 100 E Mirror image Rotate image o Video Stream Maximum frame rate v degrees Unlimited Limited to Overlay Settings 1 30 fps per viewer Include overlay image at the coordinates X O E Include date E Include time E include text Text color white Text background color black Place text date time at top Y of image Preview View image stream while configuring Reset Video format 2 View area size 1067x800 0 vo 0
22. AVC is a video compression standard that provides high quality video streams at low bit rates An H 264 video stream consists of different types of frames such as l frames and P frames An l frame is a complete image whereas P frames only contain the differences from previous frames The GOV length is the number of frames between two consecutive I frames Increasing the GOV length may save considerably on bandwidth requirements in some cases but may also have an adverse affect on image quality The Axis product supports two H 264 profiles The Main profile provides higher compression than the Baseline profile with the same video quality but requires more processing power to decode The bit rate can be set as Variable Bit Rate VBR or Constant Bit Rate CBR VBR adjusts the bit rate according to the image complexity using up more bandwidth for increased activity in the image and less for lower image activity CBR allows you to set a fixed Target bit rate that consumes a predictable amount of bandwidth As the bit rate would usually need to increase for increased image activity but in this case cannot frame rate and image quality are affected negatively To partly compensate for this it is possible to prioritize either frame rate or image quality Not setting a priority means that frame rate and image quality are equally affected You must save your settings before they can take effect The current bit rate can be set to appear as text overlay To
23. IP gt Basic The ARP Ping service is automatically disabled two minutes after the product is started or as soon as an IP address is set To reset the IP address the product must be restarted to activate ARP Ping for an additional two minutes Pinging the product is still possible when this service is disabled AXIS Video Hosting System AVHS AVHS used in conjunction with an AVHS service provides easy and secure Internet access to live and recorded video accessible from any location For more information and help to find a local AVHS Service Provider go to www axis com hosting AVHS is enabled by default The settings are configured under System Options gt Network gt TCP IP gt Basic One click enabled Press the product s control button see Hardware Overview on page 4 to connect to an AVHS service over the Internet Once registered Always will be enabled and the Axis product stays connected to the AVHS service If the product is not registered within 24 hours from when the button is pressed the product will disconnect from the AVHS service Always The Axis product will constantly attempt to connect to the AVHS service over the Internet Once registered the product will stay connected to the service This option can be used when the product is already installed and it is not convenient to use the one click installation 37 AXIS M1143 L System Options AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service
24. N 72 APTFLEV AY REBICRL TEA Nt sim mSEs amp m dcoccZ euszd BURBSUHEIC O CIEU URWRUELTREW Photobiological Safety This product fulfills the requirements for photobiological safety according to EN 62471 AXIS M1143 L Table of Contents Hardware Overview usua ad baS RE x ERE FERXEERESERE E ERE ER ERE 4 COnnectors sis up de ni eee ae eee ais ah ee aie big DOG ege Ra Rubus LED IriglG S GES esse rarement ee OH qb ei media de 5 Accessing the Product sssssssssisssmessencessetueccesrasenens 6 Access from Browser isses dau nude made d tendue bd ES 6 Access from the Internet 7 Set the Root Password 42 cese seed etr on ere e ed ea d 7 The Live View Page iussu Re Rx RR AR Ex he PARERE E AR ERR ds 8 Media Streams 25 5222 sui snescesestennmes sssrasgsentess 10 How to Stream H264 ceste ec dut onu pis esten uda 10 MJPEG aa ss mage conan ea ea on ns prend ea Bree nee 10 AXIS Media Control AMC 10 Alternative Methods of Accessing the Video Stream 11 Setting Up the Product 2 242482 e RR RE EAR ERE RR ARE 13 Basic Setup ex sse au beer be Ree ee Qe E Ress Ri Chae EOS DER PEE 13 MDC 14 Video StreaIm celsus ture rk ongubd oka unii PR Roe E ra M Bore 14 Stream Profiles 22 sage ume re RR esta ER XR XR RR RE EK OR es 15 Camera Settings 16 VIGNES E a ae re ee ee nu 17 OVEN AY ME A on Een
25. Processor memory Power IR illumination Connectors Local storage Operating conditions Storage temperature Approvals Weight Included accessories Video management software not included 1 0 terminal connector 4 pin terminal block for Digital Input Digital Output Auxiliary power and ground GND e CE LM Can be used to power auxiliary equipment AXIS Camera Management tool on CD and web based configuration Configuration of backup and restore Firmware upgrades over HTTP or FTP firmware available on www axis com Aluminium and PC ABS Color White NCS S 1002 B Ambarella 256 MB RAM 128 MB Flash Battery backed up real time clock Power over Ethernet IEEE 802 3af Class 2 max 6 49W Highly efficient IR LEDs with adjustable intensity and angle of illumination Range of reach up to 25 m RJ 45 10BASE T 100BASE TX 1 alarm input and 1 output Micro SD SDHC memory card slot card not included 0 C to 40 C 32 F to 122 F humidity 20 80 RH non condensing 20 to 60 C 4 to 140 F CE Emission EN55022 2006 A1 Class B Harmonics EN61000 3 2 Flicker EN61000 3 3 Immunity EN55024 EN61000 6 1 EN61000 6 2 Safety EN60950 1 A11 FCC FCC Part 15 Subpart B Class B demonstrated by compliance with EN55022 CISPR 22 Japan VCCI 2008 Class B ITE e C tick AS NZS CISPR 22 demonstrated by compliance with EN55022 CISPR 22 Canada ICES 003 Canadian ICES 003 Class B digital demon
26. Reached trigger the rule when the camera stops at a preset position This can be for example be used with the Send Images action to upload images from the preset position Available trigger the rule when the storage device is unmounted or removed This can for example be used to send maintenance notifications Full trigger the rule when the storage device is full Under normal operation the oldest recordings will be overwritten to prevent the storage device from becoming full Locked trigger the rule if the storage device is locked write protected System Initializing trigger the rule when the product is being started This can for example be used to send a notification when the product restarts 27 AXIS M1143 L Events Recurrence trigger the rule periodically see Recurrences on page 29 This can for example be used to upload an image every 5 minutes Use Schedule trigger the rule according to the selected schedule see Schedules on page 29 Available actions include e IR light activate de activate IR light e Output Port activate an I O port to control an external device e PTZ Control Preset Position go to a preset position Record Video record video to a selected storage e Send Images send images to a recipient e Send Notifications send a notification message to a recipient e Status LED flash the LED indicator This can for example be used to validate trigge
27. USER MANUAL AXIS M1143 L About this Document This manual is intended for administrators and users of the AXIS M1143 L Network Camera and is applicable to firmware 5 40 and later It includes instructions for using and managing the product on your network Previous experience of networking will be of use when using this product Some knowledge of UNIX or Linux based systems may also be beneficial for developing shell scripts and applications Later versions of this document will be posted to the Axis website as required See also the product s online help available via the web based interface Liability Every care has been taken in the preparation of this manual Please inform your local Axis office of any inaccuracies or omissions Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice Axis Communications AB makes no warranty of any kind with regard to the material contained within this document including but not limited to the implied warranties of merchantability and fitness for a particular purpose Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing performance or use of this material This product is only to be used for its intended purpose Intellectual Property Rights Axis AB has intellectual property rights relating
28. a Control in Internet Explorer in Windows AXIS Media Control AMC AXIS Media Control AMC in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product 10 AXIS M1143 L Media Streams The AMC Control Panel can be used to configure various video settings Please see the AXIS Media Control User s Manual for more information The AMC Control Panel is automatically installed on first use after which it can be configured Open the AMC Control Panel from e Windows Control Panel from the Start menu e Alternatively right click the video image in Internet Explorer and click Settings AXIS Media Control Video Audio PTZ Recording General Network Streaming Snapshot MPEG 4 AXIS Media Control E Copyright 2004 2011 Axis Communications 4B Version 5 01 Versions Item Version Media Control 5 1 1 0 Audio Component 3 1 0 0 RTP Source Filter 3 1 1 0 MPEG 2HTTP Source Filter 1 3 3 MPEG 4 Video Decoder 2 0 4 Motion JPEG Video Decoder 3 0 0 2 0 2 2 0 0 File writer Overlay Mixer Filter 3 0 0 View License View User s Manual Alternative Methods of Accessing the Video Stream You can also access video and images from the Axis product in the following ways e Motion JPEG server push if supported by the client Firefox for example This option maintains an open HTTP connection to the browser and sends data as and when required for as long
29. age resolution and or lower compression levels result in images containing more data Bandwidth affected Access by large numbers of Motion JPEG and or unicast H 264 clients Bandwidth affected e Simultaneous viewing of different streams resolution compression by different clients Effect on frame rate and bandwidth e Accessing Motion JPEG and H 264 video streams simultaneously Frame rate and bandwidth affected e Heavy usage of event settings affect the product s CPU load Frame rate affected e Heavy network utilization due to poor infrastructure Bandwidth affected e Viewing on poorly performing client computers lowers perceived performance Frame rate affected 52 User Manual Ver M1 10 AXIS M1143 L Date June 2012 Axis Communications AB 2012 Part No 45407
30. also possible to reset parameters to factory default via the web interface Go to Setup System Options Maintenance 44 AXIS M1143 L Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices One of your first actions when troubleshooting a problem should be to check the current firmware version The latest version may contain a correction that fixes your particular problem The current firmware version in the Axis product is displayed in the page Setup Basic Setup and in Setup About Upgrading the Firmware When you upgrade the product with the latest firmware from Axis website the product receives the latest functionality available Always read the upgrade instructions and release notes available with each new release before upgrading the firmware To upgrade follow these instructions 1 Save the firmware file to your computer The latest version of the firmware is available free of charge from Axis website at www axis com techsup 2 Go to Setup gt System Options gt Maintenance in the products web pages 3 Under Upgrade Server click Browse and locate the file on your computer Click Upgrade After starting the upgrade process always wait at least 5 10 minutes before restarting the product even if you suspect the upgrade has failed AXIS Camera Management can be used for multiple upgrades See www axis com for more information Your
31. as required e Still JPEG images in a browser Enter the path http ip axis cgi jpg image cgi e Windows Media Player This requires AXIS Media Control and the H 264 decoder to be installed The following paths can be used Unicast via RTP axrtpu ip axis media media amp Unicast via RTSP axrtsp ip axis media media amp Unicast via RTSP tunneled via HTTP axrtsphttp ip axis media media amp Multicast axrtpm ip axis media media amp e QuickTime The following paths can be used rtsp ip axis media media amp rtsp ip axis media media 3gp 11 AXIS M1143 L Media Streams lt ip gt IP addess The Axis product supports QuickTime 6 5 1 and later QuickTime adds latency to the video stream t may be possible to use other players to view the H 264 stream using the paths above although Axis does not guarantee this 12 AXIS M1143 L Setting Up the Product Setting Up the Product The Axis product can be configured by users with administrator or operator rights To open the product s Setup pages click Setup in the top right hand corner of the Live View page e Administrators have unrestricted access to all settings Operators have access to all settings except System Options See also the online help O Basic Setup Basic Setup provides shortcuts to the settings that should be made before using the Axis product 1 Users See page 33 2 TCP IP See page 3
32. assigns a host name for easy access to the product For more information see www axiscam net To register the Axis product with AXIS Internet Dynamic DNS Service go to System Options gt Network gt TCP IP gt Basic Under Services click the AXIS Internet Dynamic DNS Service Settings button requires access to the Internet The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed Advanced TCP IP Settings DNS Configuration DNS Domain Name Service provides the translation of host names to IP addresses The DNS settings are configured under System Options gt Network gt TCP IP gt Advanced Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server To make manual settings select Use the following DNS server address and specify the following Domain name Enter the domain s to search for the host name used by the Axis product Multiple domains can be separated by semicolons The host name is always the first part of a fully qualified domain name for example myserver is the host name in the fully qualified domain name myserver mycompany com where mycompany com is the domain name Primary Secondary DNS server Enter the IP addresses of the primary and secondary DNS servers The secondary DNS server is optional and will be used if the primary is unavailable NTP Configuration NTP Network Time Protocol is used to synchronize the cloc
33. be useful for identifying the product among other products installed in the same location For information about firmware upgrade see Upgrading the Firmware on page 45 Support Support Overview The System Options gt Support gt Support Overview page provides information on troubleshooting and contact information should you require technical assistance See also 7roubleshooting on page 45 System Overview To get an overview of the Axis product s status and settings go to System Options gt Support gt System Overview Information that can be found here includes firmware version IP address network and security settings event settings image settings and recent log items Many of the captions are links to the proper Setup page Logs amp Reports The System Options gt Support gt Logs amp Reports page generates logs and reports useful for system analysis and troubleshooting If contacting Axis Support please provide a valid Server Report with your query System Log Provides information about system events Access Log Lists all failed attempts to access the product The Access Log can also be configured to list all connections to the product see below Server Report Provides information about the product status in a pop up window The Access Log is automatically included in the Server Report You can view or download the server report Downloading the server report creates a zip file that contains a complete s
34. c and management traffic SMTP email To send email messages from the Axis product via SMTP Simple Mail Transfer Protocol an SMTP mail server must be set up This is done under System Options gt Network gt SMTP email Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided A From email address is also required If the mail server requires authentication check Use authentication to log in to this server and enter the necessary information SNMP The Simple Network Management Protocol SNMP allows remote management of network devices An SNMP community is the group of devices and management station running SNMP Community names are used to identify groups The Axis product can be configured to support SNMP on the System Options Network SNMP page Depending on the level of security required select the version on SNMP to use SNMP v1 v2 provides the lowest level of security The community name can be specified as a password for read or read write access to all supported SNMP devices The default password for the Read community is public and the default password for the Write community is write If HTTPS is enabled SNMP v1 and SNMP v2c should be disabled Traps for SNMP v1 v2 are used by the Axis product to send messages to a management system on important events and status changes Check Enable traps and enter the IP address where the trap message should be sen
35. ck Edit The IR Illumination window displays the approximate area the IR light will illuminate given the current settings The default IR illumination zoom is set at 1 If the camera s zoom is adjusted to a different value move the Angle of illumination slider to the same value for optimal IR illumination in the IR Light window Camera Settings IR Illumination Edit in the camera s GUI 16 AXIS M1143 L Setting Up the Product View Area A view area is a cropped part of the full view The view area is treated as a video source in Live View and has its own video stream and PTZ settings When setting up a view area it is recommended that the video stream resolution is the same size as or smaller than the view area size Setting the video stream resolution larger than the view area size implies digitally scaled up video after sensor capture requiring more bandwidth without adding image information To enable a view area go to Video Camera Settings and select Enable View Area To configure the view area 1 Go to Video View Area 2 Select an Aspect ratio and a Video stream resolution 3 Use the mouse to move and resize the view area 4 Select Enable PTZ to enable digital PTZ for the view area 5 Click Save to save the settings The PTZ functionality is useful during installation of the Axis product Use a view area to crop out a specific part of the full view Overlay Overlays are used to provide extra informa
36. coming data traffic to the product To do this enable the NAT traversal feature which will attempt to automatically configure the router to allow access to the product This is enabled from Setup gt System Options gt Network TCP IP Advanced For more information please see WAT traversal port mapping for IPv4 on page 39 See also AXIS Internet Dynamic DNS Service at www axiscam net For Technical notes on this and other topics visit the Axis Support web at www axis com techsup Set the Root Password To gain access to the Axis product you must set the password for the default administrator user root This is done in the Configure Root Password dialog which appears when the product is accessed for the first time To prevent network eavesdropping the root password can be set via an encrypted HTTPS connection which requires an HTTPS certificate HTTPS Hypertext Transfer Protocol over SSL is a protocol used to encrypt traffic between web browsers and servers The HTTPS certificate ensures encrypted exchange of information To set the password via a standard HTTP connection enter it directly in the first dialog To set the password via an encrypted HTTPS connection follow these steps 1 Click Create self signed certificate 2 Provide the requested information and click OK The certificate is created and the password can now be set securely All traffic to and from the product is encrypted from this point on 3 Enter a password and
37. d to create a backup file before customizing the scripts If a script causes problems reset the product to its factory default settings see page 44 For more information see www axis com developer File Upload Files for example web pages and images can be uploaded to the Axis product and used as custom settings To upload a file go to System Options Advanced File Upload Uploaded files are accessed through http ip address gt local lt user gt lt file name where user is the selected user group viewer operator or administrator for the uploaded file Plain Config Plain Config is for advanced users with experience of Axis product configuration Most parameters can be set and modified from this page Help is available from the standard help pages To open Plain Config go to System Options Advanced Plain Config Reset to Factory Default Settings This will reset all parameters including the IP address to the factory default settings 1 Disconnect power from the product 2 Press and hold the Control button and reconnect power see Hardware Overview on page 4 3 Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber 4 Release the Control button The process is complete after about 1 minute when the Status indicator turns green The product has been reset to the factory default settings The default IP address is 192 168 0 90 5 Re assign the IP address It is
38. eams Media Streams The Axis product provides several video stream formats Your requirements and the properties of your network will determine the type you use The Live View page in the product provides access to H 264 and Motion JPEG video streams and to the list of available stream profiles Other applications and clients can access video streams directly without going via the Live View page How to Stream H 264 The video compression standard H 264 makes good use of bandwidth and can provide high quality video streams at less than 1 Mbit s Deciding which combination of protocols and methods to use depends on your viewing requirements and on the properties of your network The available options in AXIS Media Control are Unicast RTP This unicast method RTP over UDP is used for live unicast video especially when it is important to always have an up to date video stream even if some images are dropped Unicasting is used for video on demand transmission so that there is no video traffic RTP Over RISP This unicast method RTP tunneled ONST RTSP on the network until a client connects and s useful as it is relatively simple to configure 2 requests the stream irewalls to allow RTSP traffic Note that there are a maximum of 20 RTP over RTSP over HTTP This unicast method can be used to traverse simultaneous unicast connections firewalls Firewalls are commonly configured to allow the HTTP protocol thus allowing RTP to
39. echnical assistance please contact your Axis reseller If your questions cannot be answered immediately your reseller will forward your queries through the appropriate channels to ensure a rapid response If you are connected to the Internet you can download user documentation and software updates find answers to resolved problems in the FAQ database Search by product category or phrase report problems to Axis support staff by logging in to your private support area e chat with Axis support staff selected countries only visit Axis Support at www axis com techsup Electromagnetic Compatibility EMC This equipment has been designed and tested to fulfill applicable standards for Radio frequency emission when installed according to the instructions and used in its intended environment Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment USA This equipment has been tested using a shielded network cable STP and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there i
40. end an email select Send Notification and select a Recipient from the list of defined recipients The While the rule is active option under Duration cannot be used with camera tampering since camera tampering does not have a duration and once it has been triggered it will not automatically return to its untriggered state For more information on actions rules see Events on page 27 Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view Motion detection is configured by defining up to 10 Include and Exclude windows Include windows define areas where motion should be detected e Exclude windows define areas within an Include window that should be ignored areas outside Include windows are automatically ignored For instructions see Set Up Motion Detection Windows on page 25 To control the number of motion detection alarms the parameters Object Size History and Sensitivity can be adjusted See Motion Detection Parameters on page 25 Once motion detection windows are configured the Axis product can be configured to perform actions when motion is detected Possible actions include uploading images and start recording For more information see Setting Up an Action Rule on page 28 24 AXIS M1143 L Detectors U Set Up To set up 1 sing the motion detection feature may decrease the product s overall performance Basic Setup Motion Detection o
41. era settings under Setup gt Video gt Video Stream and Setup gt Video Camera Settings Missing images in uploads This can occur when trying to use a larger image buffer than is actually available Try lowering the frame rate or the upload period Slow image update Configuring pre buffers motion detection high resolution images or high frame rates will affect the performance of the Axis product Poor performance Poor performance may be caused by heavy network traffic multiple users accessing the product low performance clients use of features such as motion detection event handling or uploaded applications Poor quality snapshot images Screen incorrectly Configure your screen to show at least 65000 colors that is at least 16 bits Using only 16 or 256 configured on your computer colors will produce dithering artifacts in the image Overlay image is not displayed Incorrect size or location of The overlay image may have been positioned incorrectly or may be too large See Overlay Image overlay image Settings in the online help for more information Privacy mask is not displayed Incorrect size or location of The privacy mask may have been positioned incorrectly or may be too large privacy mask Browser freezes Firefox can sometimes Lower the image resolution freeze on a slow computer Problems uploading files Limited space There is only limited space available for the upload of your own files Delete existing files to
42. erver report text file in UTF 8 format Select the Include snapshot with default image settings option to include a snapshot of the product s Live View that also shows the settings specified under Video Stream gt Image gt Image Appearance The server report zip file should always be included when contacting support Parameter List Shows the product s parameters and their current settings This may prove useful when troubleshooting or when contacting Axis Support Connection List Lists all clients that are currently accessing media streams Crash Report Generates an archive with debugging information The report takes several minutes to generate 43 AXIS M1143 L System Options The log levels for the System Log and the Access Log are set under System Options Support Logs amp Reports Configuration The Access Log can be configured to list all connections to the product select Critical Warnings amp Info If required a different log level can be used when sending emails Advanced Scripting Scripting allows experienced users to customize and use their own scripts Improper use may cause unexpected behavior and loss of contact with the Axis product Axis strongly recommends that you do not use this function unless you understand the consequences Axis Support does not provide assistance for problems with customized scripts To open the Script Editor go to System Options Advanced Scripting It is recommende
43. f control to use Pulse activates the output for a defined period of time The pulse time can be set from 1 100 second to 60 seconds 20 AXIS M1143 L Live View Config Active Inactive displays two buttons one or each action To configure the active and inactive states go to System Options gt Ports amp Devices gt 1 0 Ports and set the port s Normal state For more information about I O ports see 0 Ports on page 42 21 AXIS M1143 L PTZ Pan Tilt Zoom PTZ Pan Tilt Zoom The PTZ menu is available if digital PTZ pan tilt and zoom is enabled in the selected view area For more information on view areas see View Area on page 17 Preset Positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location Preset positions can be accessed in several ways e By selecting the preset from the Preset positions drop down list in the Live View Page e When setting up action rules See page 27 To add a preset position 1 Go to PTZ Preset Positions 2 Use the pan tilt and zoom controls to steer the camera view to the desired position 3 Enter a descriptive name in the Current position field The product can be configured to return to the Home position when the PTZ functionality has been inactive for a specified length of time Enter the length of time in the field and click Save Set the time to zero to prevent the product from automatically returning to
44. free up space 48 AXIS M1143 L Troubleshooting Motion Detection triggers unexpectedly Changes in luminance Motion detection is based on changes in luminance in the image This means that if there are sudden changes in the lighting motion detection may trigger mistakenly Lower the sensitivity setting to avoid problems with luminance Storage and disk management problems Video cannot be recorded Check that the SD card is not write protected that is read only SD card cannot be mounted Reformat the SD card and then click Mount 49 Technical Specifications AXIS M1143 L 1 4 progressive scan RGB CMOS Lens Varifocal DC iris manual focus and zoom 6mm 2 5 6 mm F1 4 Horizontal angle of view 72 34 Vertical angle of view 54 24 Diagonal angle of view 88 40 SVGA Resolution Minimum 0 6 lux F1 4 illumination O lux with IR illumination on Pan Tilt Zoom Digital PTZ preset positions Video Video H 264 MPEG 4 Part 10 AVC Motion JPEG compression 800 x 600 to 352 x 240 H 264 30 fps in all resolutions Motion JPEG 30 fps in all resolutions Video streaming Multiple individually configurable streams in H 264 and Motion JPEG Controllable frame rate and bandwidth VBR CBR H 264 Image settings Compression color brightness sharpness contrast white balance exposure control Rotation 0 90 180 270 including Corridor Format Text and image overlay privacy mask and mirroring of images Cor
45. go to Setup Video Stream Profiles To select a default stream profile for the Live View page go to Setup Live View Config Camera Settings The Video Camera Settings page provides access to advanced image settings for the Axis product Image Appearance Increasing the Color level increases the color saturation The value 100 gives maximum color saturation The value O gives a black and white image The image Brightness can be adjusted in the range 0 100 where a higher value produces a brighter image Increasing the Sharpness can increase bandwidth usage A sharper image might increase image noise especially in low light conditions A lower setting reduces image noise but the whole image will appear less sharp The Contrast changes the relative difference between light and dark It can be adjusted using the slidebar White Balance White balance is used to make colors in the image appear the same regardless of the color temperature of the light source The Axis product can be set to automatically identify the light source and compensate for its color Alternatively select the type of light source from the drop down list For a description of each available setting see the online hei Exposure Settings Configure the exposure settings to suit the image quality requirements in relation to lighting frame rate and bandwidth considerations Exposure value Click in the bar to fine tune the exposure Enable Backlight co
46. his FTP server has nothing to do with the product s ability to transfer images via FTP to other locations and servers RTSP The RTSP server running in the Axis product allows a connecting client to start an H 264 stream The RTSP port number can be changed under System Options gt Network gt TCP IP gt Advanced The default port is 554 H 264 video streams will not be available if the RTSP server is disabled 39 AXIS M1143 L System Options SOCKS SOCKS is a networking proxy protocol The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server This functionality is useful if the Axis product is located on a local network behind a firewall and notifications uploads alarms etc need to be sent to a destination outside the local network for example the Internet SOCKS is configured under System Options Network SOCKS For more information see the online help O QoS Quality of Service QoS Quality of Service guarantees a certain level of a specified resource to selected traffic on a network A QoS aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use The QoS settings are configured under System Options gt Network gt QoS Using DSCP Differentiated Services Codepoint values the Axis product can mark the following types of traffic live video event alarm traffi
47. hronize with NTP Server obtains date and time from an NTP server With this option date and time settings are updated continuously For information on NTP settings see MZP Configuration on page 38 If using a host name for the NTP server a DNS server must be configured See DWS Configuration on page 38 e Set manually allows you to manually set date and time If using an NTP server select your Time zone from the drop down list If required check Automatically adjust for daylight saving time changes The Date amp Time Format Used in Images is the date and time format displayed as a text overlay in the video stream Use the predefined formats or see File Naming amp Date Time Formats in the online help Q for information on how to create custom date and time formats To include date and time in the overlay text go to Video and select Include date and Include time 36 AXIS M1143 L System Options Network Basic TCP IP Settings The Axis product supports IP version 4 and IP version 6 Both versions can be enabled simultaneously and at least one version must always be enabled Network Interface Mode The network interface to the AXIS product can be wired or wireless Different settings can be used for each network interface but only one can be used at a time In Auto mode the product will use a wireless network unless a network cable is connected in which case it will use the wired network In Wired mode the product will require
48. ing features of the Live View page e Stream Profile See page 75 Default Viewer for Browser See page 79 e Viewer Settings See page 20 e Action Buttons These are the buttons described in Controls on the Live View Page on page 8 e User Defined Links See page 20 e Output Buttons See page 20 Basic Setup Live View Layout Q Stream Profile Video Stream profile Motion JPEG v Live View Config 7 Show stream profile selection Layout Default Viewer PTZ Windows Internet Explorer AMC ActiveX v Other Browsers Server push v gt Detectors ED P P P pem Note QuickTime is only used with H 264 Motion JPEG will be shown with AMC in Windovs Internet Explorer and with server push in other browsers gt Events Vi Steere Show viewer toolbar Recordings v V Enable H 264 decoder installation System Options j Show crosshair in PTZ joystick mode About Use PTZ joystick mode as default T Enable recording button Not applicable to AMC ActiveX Action Buttons Show manual trigger button Show snapshot button Show IR Illumination User Defined Links 7 show custom link 1 Use as cgilink web link Name Custom link 1 URL http CT Show custom link 2 Useas cgilink web link Name Custom link 2 URL http Show custom link 3 Use as cgilink web link Name Custom link 3 URL http E Show custom link 4 Useas
49. ing from the command line arp s IP address gt serial number temp 45 AXIS M1143 L Troubleshooting ping s 408 IP address In Windows type the following from a command DOS prompt this may require that you run the command prompt as an administrator arp s IP address serial number ping 1 408 t IP address gt 2 If the product does not reply in 30 seconds restart it and wait for a reply Press CTRL C to stop Ping 3 Open a browser and type in the product s IP address In the page that appears use the Browse button to select the upgrade file to use Then click Load to restart the upgrade process 4 After the upgrade is complete 1 10 minutes the product automatically restarts and shows a steady green on the Status indicator 5 Reinstall the product referring to the Installation Guide If the emergency recovery procedure does not get the product up and running again contact Axis support at www axis com techsup Symptoms Possible Causes and Remedial Actions Problems setting the IP address When using ARP Ping The product is located on a different subnet The IP address is being used by another device Possible IP address conflict with another device on the same subnet Try the installation again The IP address must be set within two minutes after power has been applied to the product Ensure the Ping length is set to 408 See the Installation Guide for detailed instructi
50. ings on page 44 If the product and the client are on the same network run AXIS IP Utility to locate the product Identify the product using its model or serial number Move the Axis product to an isolated network or to one with no DHCP or BOOTP server Set the IP address again using AXIS IP Utility or ARP Ping see the Installation Guide Open the Setup pages and disabled DHCP in the TCP IP settings Return the product to the main network The product now has a fixed IP address that will not change For authentication to work properly the date and time settings in the Axis product should be synchronized with an NTP server See Date amp Time on page 36 46 AXIS M1143 L Troubleshooting The product is accessible locally but not externally Router configuration Firewall protection Default routers required To configure your router to allow incoming data traffic to the Axis product enable the NAT traversal feature which will attempt to automatically configure the router to allow access to the Axis product see WAT traversal port mapping for IPv4 on page 39 The router must support UPnPTM Check the Internet firewall with your network administrator Check if you need to configure the router settings Problems with the H 264 format No H 264 displayed in the client No multicast H 264 displayed in the client Multicast H 264 only accessible by local clients Poor rendering of H 264 images Color saturation is
51. k times of devices in a network The NTP settings are configured under System Options Network TCP IP Advanced Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server To make manual settings select Use the following NTP server address and enter the host name or IP address of the NTP server Host Name Configuration The Axis product can be accessed using a host name instead of an IP address The host name is usually the same as the assigned DNS name The host name is configured under System Options Network TCP IP Advanced Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4 Select Use the host name to set the host name manually Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product s IP address changes For more information see the online help O Link Local IPv4 Address Link Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network The product can have a Link Local IP and a static or DHCP supplied IP address at the same time This function can be disabled under System Options gt Network gt TCP IP gt Advanced HTTP The HTTP port used by the Axis product can be changed under System Options gt Network gt TCP IP gt Advanced In addition to the default
52. k with the network administrator that there is enough bandwidth available Check in the AMC Control Panel H 264 tag that video processing is NOT set to Decode only key frames Lower the image resolution See Performance Considerations on page 52 The maximum frames per second is dependent on the utility frequency 60 50 Hz of the Axis product See 7echnical Specifications on page 50 Decrease the GOV length Go to Video Video Stream and select the H 264 tab to modify the GOV length Status and Network indicator LEDs are flashing red rapidly Hardware failure Contact your Axis reseller 47 AXIS M1143 L Troubleshooting Status indicator LED is flashing red and the product is inaccessible A firmware upgrade has See Emergency Recovery Procedure on page 45 been interrupted or the firmware has otherwise been damaged No images displayed on web page Problems with AXIS Media To enable the updating of video images in Internet Explorer set the browser to allow ActiveX Control nternet Explorer controls Also make sure that AXIS Media Control is installed on your computer only Installation of additional Configure the Axis product to use a Java applet for updating video images in Internet Explorer Go ActiveX component to Setup Live View Config and select Java applet under Default viewer restricted or prohibited Video and image problems general Image too dark or too light Check the video stream and cam
53. led certificates 3 Under Settings select the EAPOL version and provide the EAP identity associated with the client certificate 4 Check the box to enable IEEE 802 1X and click Save For authentication to work properly the date and time settings in the Axis product should be synchronized with an NTP server See Date amp Time on page 36 Certificates Certificates are used to authenticate devices on a network Typical applications include encrypted web browsing HTTPS network protection via IEEE 802 1X and secure upload of images and notification messages for example via email Two types of certificates can be used with the Axis product Server Client certificates to authenticate the Axis product 35 AXIS M1143 L System Options CA certificates to authenticate peer certificates for example the certificate of an authentication server in case the Axis product is connected to an IEEE 802 1X protected network Installed certificates except preinstalled CA certificates will be deleted if the product is reset to factory default Preinstalled CA certificates that have been deleted will be reinstalled A Server Client certificate can be self signed or issued by a Certificate Authority CA A self signed certificate offers limited protection and can be used before a CA issued certificate has been obtained To install a self signed certificate 1 Go to System Options Security Certificates 2 Click Create self signed cer
54. mpensation Enable this option if a bright spot of light for example a light bulb causes other areas in the image to appear too dark Exposure priority When Motion is prioritized and maximum Shutter time is set to a small value motion blur in the image is minimized This can be useful for recognition of moving objects such as people and vehicles However prioritizing motion may cause an increase in image noise especially in low light situations When Low noise is prioritized and Gain is set to a small value image noise is minimized The file size is reduced which can be useful if storage space or bandwidth is limited However prioritizing low noise may result in a very dark image especially in low light situations Built in IR Illuminations LEDs CAUTION Do not look directly into the IR LED at short distance Since the IR light provided from the IR LED is powerful light outside of the visible range please use the camera to check if IR light is activated or not The IR illumination can be activated or de activated and its intensity can be increased or decreased by moving the slider from the product s Live View page Other settings can be defined from Setup gt Video gt Camera Settings De select the Enable IR illumination option to disable IR illumination altogether If you disable the Synchronize IR illumination with day night option IR illumination will not be synchronized with day night changes To configure IR illumination cli
55. nal software components the product can be configured to use a Java applet for viewing Motion JPEG Access from a Browser 1 Start a browser Internet Explorer Firefox Safari 2 Enter the IP address or host name of the Axis product in the browser s Location Address field To access the product from a Macintosh computer Mac OS X click on the Bonjour tab and select the product from the drop down list If you do not know the IP address use AXIS IP Utility to locate the product on the network For more information on how to discover and assign an IP address refer to the Installation Guide 3 Enter your user name and password If this is the first time the product is accessed the root password must first be configured for instructions see Set the Root Password on page 7 4 The product s Live View page appears in your browser The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences Consequently some of the examples and functions featured here may differ from those displayed in your own Live View page AXIS M1144 L Network Camera Live View Setup Help Stream profile Trigger Ir illumination Motion JPEG V Q9 00 AXIS M1143 L Accessing the Product Access from the Internet Once connected the Axis product is accessible on your local network LAN To access the product from the Internet you must configure your network router to allow in
56. nection of external devices For information on how to connect external devices see Connectors on page 4 The 1 0 ports are configured under System Options gt Ports amp Devices gt 1 0 Ports The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit Port Status The list on the System Options Ports amp Devices Port Status page shows the status of the product s input and output ports Maintenance The Axis product provides several maintenance functions These are available under System Options Maintenance Click Restart to perform a correct restart if the Axis product is not behaving as expected This will not affect any of the current settings Click Restore to reset most settings to the factory default values The following settings are not affected 42 AXIS M1143 L System Options e the boot protocol DHCP or static e the static IP address e the default router e the subnet mask e the system time e the IEEE 802 1X settings e the focus position Click Default to reset all settings including the IP address to the factory default values This button should be used with caution The Axis product can also be reset to factory default using the control button see Reset to Factory Default Settings on page 44 To identify the product or test the Status LED click Flash LED under Identify and specify the duration in seconds minutes or hours This can
57. ons If the IP address intended for the product and the IP address of the computer used to access the product are located on different subnets you will not be able to set the IP address Contact your network administrator to obtain an IP address Disconnect the Axis product from the network Run the Ping command in a Command DOS window type ping and the IP address of the product e Ifyou receive Reply from IP address gt bytes 32 time 10 this means that the IP address may already be in use by another device on the network Obtain a new IP address from the network administrator and reinstall the product fyoureceive Request timed out this means that the IP address is available for use with the Axis product Check all cabling and reinstall the product The static IP address in the Axis product is used before the DHCP server sets a dynamic address This means that if the same default static IP address is also used by another device there may be problems accessing the product The product cannot be accessed from a browser Cannot log in The IP address has been changed by DHCP Certificate error when using IEEE 802 1X When HTTPS is enabled ensure that the correct protocol HTTP or HTTPS is used when attempting to log in You may need to manually type http or https in the browser s address field If the password for root is lost the product must be reset to the factory default settings See Reset to Factory Default Sett
58. our List and click Modify Remove For more information see the online help O Advanced Controls Panel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX Application Programming Interface The buttons will be displayed in the PTZ control panel which is available in the Live View page through the Ctrl panel button see page 8 23 AXIS M1143 L Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned or when the lens is covered sprayed or severely defocused To send an alarm for example an email an action rule must be set up To configure tampering 1 Go to Detectors Camera Tampering 2 Setthe Minimum duration that is the time that must elapse before an alarm is generated This can help prevent false alarms for known conditions that affect the image 3 Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off or if the lens is sprayed covered or rendered severely out of focus 4 Click Save To configure the product to send an alarm when tampering occurs 1 Go to Events gt Action Rules 2 Click Add to set up a new action rule 3 Enter a Name for the action rule 4 Under Condition select Detectors from the Trigger list 5 Select Tampering from the list of detectors 6 Optionally select a schedule and set additional conditions 7 Select the action To s
59. ports encrypted browsing using HTTPS This is configured on the System Options Security HTTPS page A self signed certificate can be used until a Certificate Authority issued certificate has been obtained Click Create self signed certificate to install a self signed certificate Although self signed certificates are free and offer some protection true security is only implemented after the installation of a signed certificate issued by a Certificate Authority To obtain a signed certificate from an issuing Certificate Authority click Create Certificate Request When the signed certificate is returned click Install signed certificate to import the certificate The properties of any certificate request currently resident in the product or installed can be viewed by clicking Properties To enable HTTPS in the Axis product the HTTPS Connection Policy must be set for each user group For more information see the online helpQ 33 AXIS M1143 L System Options HTTPS HTTPS HyperText Transfer Protocol over Secure Socket Layer or HTTP over SSL is a web protocol providing encrypted browsing HTTPS can also be used by users and clients to verify that the correct device is being accessed The security level provided by HTTPS is considered adequate for most commercial exchanges The Axis product can be configured to require HTTPS when users from different user groups administrator operator viewer connect To use HTTPS an HTTPS cer
60. r specified users under System Options Security Users AXIS M1143 L Accessing the Product These controls are available if digital PTZ is enabled in the selected view area see View Area on page 17 Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the O mouse pointer Click the Center mode button and click in the image to center the camera view on that position The center mode F button could also be used to zoom in on a specific area Click in the image and drag to draw a rectangle surrounding the area to be magnified To zoom out rotate the mouse wheel Ctrl panel Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls User defined buttons can also appear in the Control panel See Controls on page 23 Source Select a PTZ preset position to steer the camera view to the saved position See Preset Positions Home b on page 22 Up Pan and Tilt bars Use the arrows to pan and tilt the camera view or click on a position on the bar to steer the t camera view to that position C Zoom bar Use the arrows to zoom in and out or click on a position on the bar to zoom to that position L PAN Let OLL r 11 nn Mn o 1 19 Right CITIT zoom wide f O Tele v Down The PTZ controls can be disabled under PTZ gt Advanced gt Controls see Contro s on page 23 AXIS M1143 L Media Str
61. rd video if motion is detected outside office hours Use one of the predefined schedules or create a new schedule as described below To create a new schedule 1 Go to Events gt Schedules and click Add 2 Enter a descriptive name and the information needed for a daily weekly monthly or yearly schedule 3 Click OK To use the schedule in an Action Rule select the schedule from the Schedule drop down list in the Action Rule Setup page Recurrences Recurrences are used to trigger Action Rules repeatedly for example every 5 minutes or every hour To set up a recurrence 29 AXIS M1143 L Events 1 Go to Events Recurrences and click Add 2 Enter a descriptive name and recurrence pattern 3 Click OK To use the recurrence in an Action Rule first select Time from the Trigger drop down list in the Action Rule Setup page and then select the recurrence from the second drop down list To modify or remove recurrences select the recurrence in the Recurrences List and click Modify or Remove 30 AXIS M1143 L Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule To start a continuous recording see page 31 To set up action rules see page 28 e To access recordings see Recording List on page 31 To configure camera controlled storage see Storage on page 41 Recording List Recorded videos are listed on the Recordings List page The li
62. ridor Format Password protection IP address filtering HTTPS encryption digest authentication user access log Supported IPv4 V6 HTTP HTTPS SSL TLS QoS Layer 3 DiffServ FTP SMTP Bonjour UPnP protocols SNMPv1 v2ce v3 MIB II DNS DynDNS NTP RTSP RTP TCP UDP IGMP RTCP ICMP DHCP ARP SOCKS etc This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit System Application Open API for software integration including VAPIX from Axis Communications AXIS Integration Programming Media Control SDK event trigger data in video stream Quality of Service QoS layer 3 Interface DiffServ Model Embedded Linux operating system Available at www axis com Intelligent video Video motion detection active tampering alarm Alarm triggers Intelligent video External input Alarm events File upload via FTP HTTP and email Notification via email HTTP and TCP pre and post alarm video buffering Activation of IR illumination External output activation video recording to local storage Video buffer 25 MB pre and post alarm Video access from Camera live view web browser Video recording to file ASF Customizable HTML pages Windows Vista XP Windows 7 Server 2003 and Server 2008 DirectX 9c or higher For other operating systems and browers see www axis com techsup 50 Technical Specifications General Connectors Installation management and maintenance Casing
63. rk Steady for connection to a 100 MBit s network Flashes for network activity Steady for connection to a 10 MBit s network Flashes for network activity No network connection Steady green for normal operation feet on at gg OO O The Status LED can be configured to be unlit during normal operation To configure go to Setup gt System Options gt Ports amp Devices gt LED See the online help for more information The Status LED can be configured to flash while an event is active The Status LED can be configured to flash for identifying the unit Go to Setup System Options Maintenance AXIS M1143 L Accessing the Product Accessing the Product To install the Axis product refer to the Installation Guide supplied with the product The product can be used with most operating systems and browsers The recommended browsers are Internet Explorer with Windows Safari with Macintosh and Firefox with other operating systems See 7echnica Specifications on page 50 To view streaming video in Internet Explorer allow installation of AXIS Media Control AMC when prompted The Axis product includes one 1 H 264 decoder license for viewing video streams The license is automatically installed with AMC The administrator can disable the installation of the decoders to prevent installation of unlicensed copies e QuickTime is also supported for viewing H 264 streams f your computer restricts the use of additio
64. rs such as motion detection during product installation and configuration Setting Up an Action Rule An action rule defines the conditions that must be met for the product to perform an action for example record video or send email notifications If multiple conditions are defined all must be met to trigger the action The following example describes how to set up an action rule to record video to a network share if there is movement in the camera s field of view Set up motion detection and add a network share 1 Go to Detectors gt Motion Detection and configure a motion detection window see page 25 2 Go to System Options Storage and set up the network share see page 42 Set up the action rule 1 Go to Events Action Rules and click Add 2 Select Enable rule and enter a descriptive name for the rule 3 Select Detectors from the Trigger drop down list 4 Select Motion Detection from the drop down list Select the motion detection window to use 5 Optionally select a Schedule and Additional conditions see below 6 Under Actions select Record Video from the Type drop down list 7 Select a Stream profile and configure the Duration settings as described below 8 Select Network Share from the Storage drop down list To add additional criteria select the Additional conditions option and add additional triggers To prevent an action from being triggered repeatedly a Wait at least time can be set Enter the time in hours
65. s no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Canada This Class B digital apparatus complies with Canadian ICES 003 Europe C This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022 This product fulfills the requirements for immunity according to EN 61000 6 1 residential commercial and light industrial environments This product fulfills the requirements for immunity according to EN 61000 6 2 industrial environments This product fulfills the requirements for immunity according to EN 55024 office and commercial environments Australia New Zealand This digital equipment fulfills the requirements for RF emission according to the Class B limit of AS NZS CISPR 22 Korea 0 7I7 z 7E S Bi Sx uESSE7 7 g M FS IFAN AF Soe AS SACS oH TE KRAAN ASS UEL Japan CORES TIABSRRHRECS COREG RE mie CEASTSCCeZRMWELTUNETM CORBI
66. s option is only available for SD cards with ext4 For SD cards with vFAT use a card reader or computer to troubleshoot the card To avoid filling the card it is recommended to remove recordings continuously Under Recording Settings select Remove recordings older than and select the number of days or weeks To stop writing to the card and protect recordings from being removed select Lock under Recording Settings Network Share Network share allows you to add network storage such as a NAS Network Attached Storage or any server that uses CIFS Common Internet File System and use them for storage of recordings To add a network share 1 Go to System Options Storage 2 Click Network Share 3 Enter the IP address DNS or Bonjour name to the host server in the Host field 4 Enter the name of the share in the Share field 5 If required select The share requires login and enter the user name and password 6 Click Connect To clear all recordings and data from the Axis product s folder on the designated share click Clear under Storage Tools To avoid filling the share it is recommended to remove recordings continuously Under Recording Settings select Remove recordings older than and select the number of days or weeks To stop writing to the share and protect recordings from being removed select Lock under Recording Settings Ports amp Devices 1 0 Ports The Axis product provides one input port and one output port for con
67. setting which is 80 any port in the range 1024 65535 can be used 38 AXIS M1143 L System Options HTTPS The HTTPS port used by the Axis product can be changed under System Options gt Network gt TCP IP gt Advanced In addition to the default setting which is 443 any port in the range 1024 65535 can be used To enable HTTPS go to System Options gt Security gt HTTPS For more information see page 33 NAT traversal port mapping for IPv4 A network router allows devices on a private network LAN to share a single connection to the Internet This is done by forwarding network traffic from the private network to the outside that is the Internet Security on the private network LAN is increased since most routers are pre configured to stop attempts to access the private network LAN from the public network Internet Use NAT traversal when the Axis product is located on an intranet LAN and you wish to make it available from the other WAN side of a NAT router With NAT traversal properly configured all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product NAT traversal is configured under System Options gt Network gt TCP IP gt Advanced e For NAT traversal to work this must be supported by the router The router must also support UPnPTM The router has many different names NAT router Network router Internet Gateway Broadband router Broadband sharing device or
68. st shows each recording s start date and time duration and the event that triggered the recording To play or download a recording follow these steps 1 Go to Recordings List 2 Use the filter to narrow the list of recordings Enter the desired filter criteria and click Filter Some filters may take a long time to complete 3 Select the recording 4 Click Play to play the recording or click Download to download the recording Multiple recordings can be downloaded at the same time Select the recordings and click Download The downloaded file is a zip file containing a minimum of three files of which the Matroska mkv files are the actual recordings The recordings are time stamped with the date and time they were downloaded that is not the date the recordings were made To play recordings in Windows Media Player AXIS Matroska File Splitter must be installed AXIS Matroska File Splitter can be downloaded from www axis com techsup software For detailed recording and video information select a recording and click Properties To remove a recording select the recording and click Remove Continuous Recording The Axis product can be configured to continuously save video to a storage device See Storage on page 41 for more information about storage devices To prevent the disk from becoming full it is recommended to configure the disk to automatically remove old recordings To start a continuous recording follow these steps
69. strated by compliance with EN55022 CISPR 22 Korea Emission KN22 Immunity KN24 UL cUL usUL UL 60950 1 IR SS EN 62471 46 x 75 x 115 mm 1 8 x 3 0 x 4 5 250g 0 21 Ib Stand Lever tool Installation Guide CD including installation tools and other software Windows decoder 1 user license AXIS Camera Station Video management software for viewing and recording up to 100 cameras For more software application via partners see www axis com products video software 3 3 V DC Power Note This pin can only be used as power out Max load 50 mA 51 AXIS M1143 L Technical Specifications Digital Input 3 Connect to GND to activate or leave floating unconnected 0 to 40 V DC to deactivate Digital Output Internal connection to ground when activated floating Max load 2100 mA unconnected when deactivated If used with an inductive Max voltage 40 V DC load e g a relay a diode must be connected in parallel with the load for protection against voltage transients 3 3 V max 50 mA Performance Considerations When settings up your system it is important to consider how various settings and situations will affect performance Some factors affect the amount of bandwidth the bit rate required others can affect the frame rate and some affect both If the load on the CPU reaches its maximum this will also affect the frame rate The following factors are among the most important to consider e High im
70. t and the Trap community that should receive the message The following traps are available e Cold start e Warm start e Link up e Authentication failed SNMP v3 provides encryption and secure passwords To use traps with SNMP v3 an SNMP v3 management application is required To use SNMP v3 HTTPS must be enabled see 77PS on page 33 To enable SNMP v3 check the box and provide the initial user password 40 AXIS M1143 L System Options The initial password can only be set once If the password is lost the Axis product must be reset to factory default see Reset to Factory Default Settings on page 44 UPnPTM The Axis product includes support for UPnPTM UPnP is enabled by default and the product is automatically detected by operating systems and clients that support this protocol UPnP can be disabled under System Options gt Network gt UPnP RTP H 264 The RTP port range and multicast settings are configured under System Options Network RTP The RTP port range defines the range of ports from which the video ports are automatically selected For multicast streams only certain IP addresses and port numbers should be used Select Always Multicast Video to start multicast streaming without opening an RTSP session Bonjour The Axis product includes support for Bonjour Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol
71. the Home position To include the preset position name in the overlay text go to Video select Include overlay text and enter the modifier P in the field For more information about modifiers see File Naming amp Date Time Formats in the online help Q Preset Positions 2 Preset Position Setup Current position gt Basic Setup Video Live View Config PTZ Up 2L em Preset Positions B Guard Tour E Advanced Available positions LE Home H v E gt Detectors F Events 3 ii Recordings Return to home a E System Options 30 0 300 seconds E 0 disabled About t Playing Motion JPEG Down PAN tet OL 5 i Fa 1 Rige Home zoom wide OF E G Tee Ctripanel_ Guard Tour A guard tour displays the video stream from different preset positions one by one in a predetermined order or at random and for configurable time periods The enabled guard tour will keep running after the user has logged off or closed the browser To add a guard tour 1 Go to PTZ gt Guard Tour and click Add 2 Enter a descriptive name 3 Specify the pause length between runs 4 Select an available preset position and click Apply 22 AXIS M1143 L PTZ Pan Tilt Zoom 5 Specify the View Time in seconds or minutes 6 Specify the View Order or select the Random view order option 7 Click Save To modify or remove guard tours go to PTZ Guard Tour select the guard tour in the Guard T
72. then re enter to confirm the spelling Click OK The password has now been configured The default administrator user name root is permanent and cannot be deleted e f the password for root is lost the product must be reset to the factory default settings See Reset to Factory Default Settings on page 44 AXIS a Create Certificate E Create Self Signed Certificate o Secure configuration of the root password via HTTPS requires a self certificate Common name 10 92 25 211 C Create self signed certificate Validity 365 days 1 9644 The name of the entity to be certified i e the IP address or host name of this product Configure Root Password using HTTP n ra OK Cancel User name root Once the certificate is created this page will close and you vill be able to Password max 64 characters configure the root password via HTTPS Confirm password AXIS a OK J Configure Root Password using HTTPS User name root The password for the pre configured administrator root must be changed before the product can be used Password max 64 characters 1f the password for root is lost the product must be reset to the factory default Confirm password settings by pressing the button located in the product s casing Please see the user documentation for more information OK ONVIF will be disabled To enable ONVIF go to Setup gt System Options gt Security gt ONVIF The password for the pre configured
73. tificate and provide the requested information To create and install a CA signed certificate 1 Create a self signed certificate as described above 2 Go to System Options Security Certificates 3 Click Create certificate signing request and provide the requested information 4 Copy the PEM formatted request and send to the CA of your choice 5 When the signed certificate is returned click Install certificate and upload the certificate Server Client certificates can be installed as Certificate from signing request or as Certificate and private key Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS 12 format The Axis product is shipped with several preinstalled CA certificates If required additional CA certificates can be installed 1 Go to System Options Security Certificates 2 Click Install certificate and upload the certificate Date amp Time The Axis product s date and time settings are configured under System Options Date amp Time Current Server Time displays the current date and time 24h clock The time can be displayed in 12h clock in the text overlay see below To change the date and time settings select the preferred Time mode under New Server Time e Synchronize with computer time sets date and time according to the computer s clock With this option date and time are set once and will not be updated automatically e Sync
74. tificate must first be installed Go to System Options Security Certificates to install and manage certificates See Certificates on page 35 To enable HTTPS on the Axis product 1 Go to System Options Security HTTPS 2 Select an HTTPS certificate from the list of installed certificates 3 Optionally click Ciphers and select the encryption algorithms to use for SSL 4 Setthe HTTPS Connection Policy for the different user groups 5 Click Save to enable the settings To access the Axis product via the desired protocol enter https or http in the address field in a browser The HTTPS port can be changed on the System Options gt Network gt TCP IP gt Advanced page IEEE 802 1X IEEE 802 1X is a standard for port based Network Admission Control providing secure authentication of wired and wireless network devices IEEE 802 1X is based on EAP Extensible Authentication Protocol To access a network protected by IEEE 802 1X devices must authenticate themselves The authentication is performed by a third party entity called an authentication server typically a RADIUS server examples of which are FreeRADIUS and Microsoft Internet Authentication Service In Axis implementation the network device and the authentication server authenticate themselves with the help of digital certificates using EAP TLS Extensible Authentication Protocol Transport Layer Security The certificates are provided by an Certification Authorit
75. tion for example for forensic video analysis or during product installation and configuration Overlays are superimposed over the video stream An overlay text can display the current date and time or a text string When using a text string modifiers can be used to display information such as the current bit rate or the current frame rate For information about available modifiers see File Naming amp Date Time Formats in the online help Q To enable overlays 1 Go to Video Video Stream and select the Image tab 2 To include an overlay image select Include overlay image at the coordinates The overlay image must first be uploaded to the Axis product see Overlay Image 3 To include date and time select Include date and Include time 4 To include a text string select Include text and enter the text in the field Modifiers can be used see e Naming amp Date Time Formats in the online help O 5 Select the text color the text background color and the position of the overlay 6 Click Save To modify the date and time format go to System Options gt Date amp Time See Date amp Time on page 36 Overlay Image An overlay image is a static image superimposed over the video stream The image for example company logo is used to provide extra information or to mask a part of the image Since it is static the position and size of an overlay image will remain the same regardless of resolution and digital Pan Tilt movemen
76. to technology embodied in the product described in this document In particular and without imitation these intellectual property rights may include one or more of the patents listed at http www axis com patent htm and one or more additional patents or pending patent applications in the US and other countries This product contains licensed third party software See the menu item About in the product s user interface for more information This product contains source code copyright Apple Computer Inc under the terms of Apple Public Source License 2 0 see http www opensource apple com apsl The source code is available from http developer apple com darwin projects bonjour Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation This equipment contains no user serviceable components Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals Trademark Acknowledgments Apple Boa Bonjour Ethernet Internet Explorer Linux Microsoft Mozilla Real SMPTE QuickTime UNIX Windows Windows Vista and WWW are registered trademarks of the respective holders Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and or its affiliates UPnP is a certification mark of the UPnP Implementers Corporation Support Should you require any t
77. tory Default Settings 44 Troubleshooting tes ieirs cna 45 Checking the Firmware 2 45 Upgrading the Firmware 22 45 Emergency Recovery Procedure 45 Symptoms Possible Causes and Remedial Actions 46 Technical Specifications ses de ceted etteueed sodden 50 Connectors sire cade eae we alee saa Mak Seabee ak eae ene a RS ES 51 Performance Considerations 52 AXIS M1143 L Hardware Overview Hardware Overview 74 Lid 2 Focus puller 3 Zoom puller 4 microSD card slot 5 0 connector 6 Network connector PoE 7 Network LED amp Status LED 9 Power LED 70 Control button Connectors For technical specifications see page 50 Network connector RJ 45 Ethernet connector Supports Power over Ethernet PoE The product shall be connected using a shielded network cable STP All cables connecting the product to the network switch shall be shielded STP and intended for their specific use Make sure that the network switch is properly grounded See Electromagnetic Compatibility EMC for regulatory requirements SD card slot A standard or high capacity microSD card not included can be used for local recording with removable storage To prevent corruption of recordings the SD card should be
78. ts To set up a dynamic mask which will always mask a specified part of the monitored area see Privacy Mask 17 AXIS M1143 L Setting Up the Product To use an overlay image the image must first be uploaded to the Axis product 1 Go to Video Overlay Image 2 Click Browse and browse to the file 3 Click Upload 4 Select the image to use from the Use overlay image list 5 Click Save To display the overlay image 1 Go to Video Video Stream and select the Image tab 2 Under Overlay Settings select Include overlay image at the coordinates and enter the X and Y coordinates 3 Click Save For information about supported image formats see the online help O Privacy Mask A privacy mask is an area of solid color that prohibits users from viewing parts of the monitored area Privacy masks cannot be bypassed via the VAPIX Application Programming Interface API The Privacy Mask List Video gt Privacy Mask shows all the masks that are currently configured in the Axis product and indicates if they are enabled You can add a new mask re size the mask with the mouse choose a color for the mask and give the mask a name For more information see the online help 2 Important Adding many privacy masks may affect the product s performance 18 AXIS M1143 L Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements It is possible to define the follow
79. xisting clients support encryption but need to log in again and be configured to use this functionality Under User Settings select the Enable anonymous viewer login option to allow anonymous users access to the Live View page Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls Deselect the Enable Basic Setup option to hide the Basic Setup menu Basic Setup provides quick access to settings that should be made before using the Axis product ONVIF ONVIF Open Network Video Interface Forum is a global interface standard that makes it easier for end users integrators consultants and manufacturers to take advantage of the possibilities offered by network video technology ONVIF enables interoperablity between different vendor products increased flexibility reduced cost and future proof systems By creating a user you automatically enable ONVIF communication Use the user name and password with all ONVIF communication with the product For more information see www onvif org IP Address Filter IP address filtering is enabled on the System Options Security IP Address Filter page Once enabled the listed IP address are allowed or denied access to the Axis product Select Allow or Deny from the list and click Apply to enable IP address filtering The administrator can add up to 256 IP address entries to the list a single entry can contain multiple IP addresses HTTPS The Axis product sup
80. y CA You need e a CA certificate to validate the identity of the authentication server e a CA signed client certificate and a private key to authenticate the network device To allow the network device to access a network protected by IEEE 802 1X 1 Obtain a CA certificate a client certificate and a client private key contact your network administrator 2 Go to Setup System Options Security IEEE 802 1X and upload the CA certificate the client certificate and the client private key 3 Under Settings select the EAPOL version provide your EAP identity and private key password 4 Check the box to enable IEEE 802 1X and click Save 34 AXIS M1143 L System Options Certificates CA Certificate The CA certificate is used to validate the identity of the authentication server Enter the path to the certificate directly or locate the file using the Browse button Then click Upload To remove a certificate click Remove Client certificate The client certificate and private key are used to authenticate the network device They can be Client private key uploaded as separate files or in one combined file e g a PFX file or a PEM file Use the Client private key field if uploading one combined file For each file enter the path to the file or locate the file using the Browse button Then click Upload To remove a file click Remove Settings EAPOL version Select the EAPOL version 1 or 2 as used in your network switch

Axis M1143-L Network Camera

Contents

Download Pdf Manuals

Related Search

Related Contents