Chief PSM2394 flat panel wall mount
Contents
1. INSTALLATION INSTRUCTIONS FLAT PANEL DISPLAY STATIC MOUNT PSM 2394W Figure 1 1 10 24 x 5 Phillips Flat Head Screw 1 Nylon Washer 4 M4 x 20mm Phillips Head Screw 1 10 24 Nylock Nut 1 Flat Panel Display Static Mount 1 Latching Flag 4 M4 x 25mm Phillips Head Screw 4 Mounting Buttons Yellow Zinc BEFORE PROCEEDING Unpack the carton verify contents shown in Figure 1 and read installation instructions completely If you are missing any of the listed components please contact Customer Service at 1 800 582 6480 C AUTION Displays are Extremely Fragile 1 Attach latching flag to mount using the 10 24 Phillips flat head screw Nylon washer and Nylock nut see Figure 2 Tighten until friction will hold the flag in place 2 Attach mounting buttons to display using four M4 screws provided see Figure 3 amp Figure 4 USE THIS HOLE WITH ATTACH MOUNTING BUTTONS USING THESE HOLES PAC 130 LOCKING FLAG it Q 9 ne O S a 9 M i M4 SCREW Figure 2 Figure 3 Figure 4 CHIEF MANUFACTURING ING 8805 000095 REV C 1 00 582 6480 952 894 6280 FAX 952 894 6918 2006 Chief Manufacturing 8401 EAGLE CREEK PARKWAY STE 700 www chiefmfg com SAVAGE MINNESOTA 55378 USA 10 06 ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING FOUR TIMES THE COMBINED WEIGHT OF ALL COMPONENTS WA RN IN G PLUS THE EQUIPMENT BEING MOUNTE2. D IF IT CANNOT SUPPORT THIS WEIGHT THE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 175 POUNDS 79 37 KG 3 Securely anchor the flat panel display static mount to wall studs or supporting framework see WARNING 4 Make sure the flag is lowered to the side before attempting to place the display on the mount 5 With the aid of another person lift the display up to the mount align the mounting buttons with the teardrop slots in the mount and set the display into place see Figure 5 6 Position raise the flag to secure the display RAISE LATCH TO SECURE DISPLAY Figure 5
Download Pdf Manuals
Related Search