Chief SLB275
Contents
1. CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface brackets NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 1 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time 2 Turn projector upside down on a flat surface 3 Place the interface bracket onto the bottom of the projector aligning the mounting holes in the bracket with the threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector 4 Position M6 x 10mm mounting screws with M6 flat washers into the threaded inserts and three bracket side tabs Position 1 2 tall spacer underneath threaded insert and mounting hole at front of interface bracket Place the M6 x 20mm screw into the threaded insert and mounting hole at front of interface bracket and through 1 2 spacer Tighten all fasteners at this time securing the bracket to the projector NOTE Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation PY instructions in the All Points Security Kit Chief is a registered trademark of Milestone AV Technologies All rights reserved We hs lt CONSUMER Milestone AV Technologies and its affiliated corporations and subsidiaries collectively2. INSTALLATION INSTRUCTIONS SSB 275 SSM 275 SLB 275 and SLM 275 Interface Brackets SSB 275 SSM 275 SLB 275 and SLM 275 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 3 Screw Phillips Pan Head Machine M6 x 10mm Screw Phillips Flat Head Machine M6 x 20mm Nylon Spacer 1 2 x 316 x 1 2 1 3 Washer M6 1 1 1 5 32 Hex Key All Points Security Kit Towards front Towards front of projector of projector oa 2 5 SLB SLM 275 Note SSB style interface bracket connections are circled Note SSM style interface bracket connections are circled Only used when installing SLB SSB interface brackets NOTE Specific to SSB style and SSM style interface bracket installation All appropriate screws come pre installed in the circled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style interface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS
3. Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document AN Chief Manufacturing a products division of Milestone AV Technologies 8802 002072 Rev00 iC ae l f 8401 Eagle Creek Parkway Savage MN 55378 2010 Milestone AV Technologies P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group Company Our Mounts Your Vision 11 10
Download Pdf Manuals
Related Search