Gefen DVI-1600HD
Contents
1. 1 x Pair RCA L R stereo Output Connector digital 1 x S PDIF digital audio Output Connector digital audio 1 x TOSLINK optical digital audio Output Connector digital video 1 x DVI 29 pin Female RS232 Connectors Input Output 9 pin Serial Female Link Connectors 4 strand LC LC fiber optic cable single or multi mode Input Video Signal Voltage 1 2 Volts p p Input DDC Signal Voltage 5 Volts p p TTL Power Supply Power Consumption 12V DC x 2 72 Watts total DIMENSION S 10 3 W x 1 2 H x 5 1 D Operating Temperature iav 0 to 50C Relative 2 aaa apa aaa 10 85 SHIPPING WEIGHT cde ae eee He eared tease 5 Ibs 122. 4 strands of LC terminated single or multi mode fiber optic cables to the sender unit Connect the opposite ends of the fiber optic cabling to the receiver unit s fiber optic receptacles Connect a DVI or HDMI using a DVI to HDMI adapter cable capable device to the DVI output of the DVI 1600HD Extender receiving unit using a user supplied cable Connect up to 3 of the audio outputs to audio receiving devices Available outputs are as follows Analog stereo using one pair of RCA analog stereo cables Digital coaxial using one S PDIF digital coaxial audio cable Digital optical using one TOSLINK digital optical audio cable NOTE All outputs are active regardless of the selected input on the sender However multi channel content that is being sent by the digital connectors will not be output by the analog stereo output Optionally connect an RS 232 device to the receiver unit using a user supplied RS 232 cable Connect the included 12V DC power supplies to both the sending and receiving units and open wall power sockets Power on the endpoint device first and then the source device 10 OPERATING THE DVI 1600HD EXTENDER Operating the DVI 1600HD Extender If the source device is a HDMI device that requires HDCP please set the DVI HDMI mode selector switch to HDMI The extension distance will be limited to 660 feet 200 meters on 4 LC single or multi mode fiber optic cables while in this mode If the source device
3. labeled Optic A on the front panel of both units will become active Fiber Optic Input B This connector accepts a pair of LC terminated fiber optic cable that will link the sending and receiving unit together When the cables between this port and the corresponding ports on the receiver are properly connected the LED indicator labeled Optic B on the front panel of both units will become active RECEIVER UNIT PANEL LAYOUT Front Panel Back Panel 10 RECEIVER UNIT PANEL DESCRIPTIONS Reset Button This button is used to cycle the power off and on In most cases this will force the source to re establish a link with the endpoint device This will also force the source to re read the EDID Optic B LED Indicator This LED will indicate the status of the connection between the sender and receiver s 2 pair of LC fiber optic cables labeled Optic B This LED will be active when a valid link between the sender and receiver has been established Status LED Indicator This LED will indicate the status of the unit and will be active when all devices are properly connected and indicates that the unit is working within specification Optic A LED Indicator This LED will indicate the status of the connection between the sender and receiver s 2 pair of LC fiber optic cables labeled Optic A This LED will be active when a valid link between the sender and receiver has been established Power LED Indicator This LED will be
4. Geren DVI 1600HD Extender EXT DVI 1600HD User Manual ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Write To Gefen Inc c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support gefen com Notice Gefen Inc reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice DVI 1600HD Extender is a trademark of Gefen Inc 2009 Gefen Inc All Rights Reserved All trademarks are the property of their respective companies Rev X3 A N 10 11 12 13 CONTENTS Introduction Operation Notes Features Sender Unit Panel Layout Sender Unit Panel Descriptions Receiver Unit Panel Layout Receiver Unit Panel Descriptions Connecting The DVI 1600HD Extender Operating The DVI 1600HD Extender Specifications Warranty INTRODUCTION Congratulations on your purchase of the DVI 1600HD Extender Your complete satisfaction is very important to us Gefen Gefen delivers innovative progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working so
5. ansmission medium eliminates electromagnetic interference EMI during send or receive operations e Lightweight rugged cabling and connectors e Cost effective per foot meter e power consumption at 72W total e Plug and play installation ease no software drivers Can use both Single and Multimode optical fiber cables e Maximum range of 2km for DVI 200m if sending HDMI with HDCP DDC e R8232 signal extension helps create long distance control systems for A V integration Package Includes 1 Gefen DVI 1600HD Sender 1 Gefen DVI 1600HD Receiver 1 6 Foot DVI Video Cable M M 1 6 Foot DB9 RS 232 Cable M F 2 12V Power Supplies 1 User s Manual SENDER UNIT PANEL LAYOUT Front Panel Back Panel Sigh 2 5 E 0O 9 11 12 13 14 15 16 T T 10 SENDER UNIT PANEL DESCRIPTIONS DVI HDMI Mode Selector Switch This switch will set the video mode DVI mode is intended for use with computers and will support resolutions of up to 1920 x 1200 HDMI mode is for use with consumer HDTV devices and supports HDCP DDC and resolutions of up to 1080p Full HD There are distance limitations associated with these modes Please see page 10 for details Audio Input Selector Button This button is used to select the audio input source There are three input options Audio analog stereo Coax digital S PDIF Optical digital TOSLINk Each press will
6. bo cables to split the HDMI signal into separate DVI video and digital audio both of which can be fed as combined input to the DVI 1600HD Sender unit The result will be HDMI with embedded audio at the Receiver end The digital input jacks can only support D PCM or PCM stereo audio formats OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI 1600HD EXTENDER The DVI 1600HD Extender uses 4 strands of LC terminated fiber optic cable Single mode and multi mode fiber optic cable types are both supported DVI and HDMI HDCP modes are available and are selectable via a switch located on the front panel of the DVI 1600HD sender unit Analog stereo RCA digital S PDIF and digital TOSLINK inputs are all available for input but only one is selectable for transmission to the receiver The selected audio input will be replicated out of all three audio outputs on the DVI 1600HD Receiver HDMI mode supports HDCP DDC with resolutions up to 1080p Full HD Both single and multi mode cables are supported Extension distances of up to 660 feet 200 meters are supported in HDMI mode DVI mode does not support HDCP or DDC and supports resolutions up to 1920 x 1200 Multi mode fiber can support distances of up to 1640 feet Single mode fiber can support distances of up to 6 600 feet 2 km The DVI 1600HD is HDMI 1 2 compliant FEATURES Features Pure signal integrity and best image over long distances e Fiber optic tr
7. cket 11 12 13 14 15 16 17 18 SENDER UNIT PANEL DESCRIPTIONS 12V DC Power Input Connect the included 12V DC power supply to this input The Power LED will become active when the 12V DC power supply has been properly connected to the unit and an open wall power socket Analog Stereo Audio Input This input will accept analog stereo audio from one pair or RCA audio cables This input corresponds to LED labeled Audio on the front panel S PDIF Digital Audio Input This input will accept digital audio from a S PDIF coaxial audio cable This input corresponds to LED labeled Coax on the front panel Optic Digital Audio Input This input will accept digital audio from a TOSLINK optical audio cable This input corresponds to LED labeled Optical on the front panel RS 232 Serial Communications Input This port is capable of 2 way serial communication between RS 232 devices connected to the sender and receiver This port can be connected to a computers serial communications port for interaction with a RS 232 serial communications device connected to the receiver DVI Input This input will accept a DVI or HDMI with a HDMI to DVI adapter cable source device Fiber Optic Input A This connector accepts a pair of LC terminated fiber optic cable that will link the sending and receiving unit together When the cables between this port and the corresponding ports on the receiver are properly connected the LED indicator
8. come active once the included 12V DC power supply has been properly connected between this unit and an available wall power socket 12V DC Power Input Connect the included 12V DC power supply to this input The Power LED will become active when the 12V DC power supply has been properly connected to the unit and an open wall power socket Analog Stereo Audio Output This output will supply analog stereo audio to one pair or RCA audio inputs on a device This input will always be active when a 2 channel source analog or digital is selected on the sender S PDIF Digital Audio Output This output will supply digital audio to a S PDIF coaxial audio input device This input will always be active when a 2 or multi channel source analog or digital is selected on the sender Optic Digital Audio Output This output will supply digital audio to a TOSLINK optical audio input device This input will always be active when a 2 or multi channel source analog or digital is selected on the sender RS 232 Serial Communications Input This port is capable of 2 way serial communication between RS 232 devices connected to the sender and receiver This port can be connected to a serial communications device for interaction with a computer via an RS 232 serial communications cable connected to the sender 11 12 13 RECEIVER UNIT PANEL DESCRIPTIONS DVI Output This output will accept a DVI or HDMI with a DVI to HDMI adapter cable capable
9. cycle through these selections Audio Selection LED Indicator This LED will be active when the Audio analog stereo audio source has been selected Coax Selection LED Indicator This LED will be active when the Coax digital S PDIF audio source has been selected Optical Selection LED Indicator This LED will be active when the Optical digital TOSLINK audio source has been selected Reset Button This button is used to cycle the power off and on In most cases this will force the source to re establish a link with the endpoint device This will also force the source to re read the EDID Optic B LED Indicator This LED will indicate the status of the connection between the sender and receiver s 2 pair of LC fiber optic cables labeled Optic B This LED will be active when a valid link between the sender and receiver has been established Status LED Indicator This LED will indicate the status of the unit and will be active when all devices are properly connected and indicates that the unit is working within specification Optic A LED Indicator This LED will indicate the status of the connection between the sender and receiver s 2 pair of LC fiber optic cables labeled Optic A This LED will be active when a valid link between the sender and receiver has been established Power LED Indicator This LED will become active once the included 12V DC power supply has been properly connected between this unit and an available wall power so
10. device Fiber Optic Input A This connector accepts a pair of LC terminated fiber optic cable that will link the sending and receiving unit together When the cables between this port and the corresponding ports on the receiver are properly connected the LED indicator labeled Optic A on the front panel of both units will become active Fiber Optic Input B This connector accepts a pair of LC terminated fiber optic cable that will link the sending and receiving unit together When the cables between this port and the corresponding ports on the receiver are properly connected the LED indicator labeled Optic B on the front panel of both units will become active CONNECTING THE DVI 1600HD EXTENDER How to Connect the DVI 1600HD Extender Connect the DVI or HDMI using a HDMI to DVI adapter cable to the DVI 1600HD Extender sending unit using a user supplied cable Connect up to 3 audio sources to the sending unit using user supplied cables Input options are as follows Analog stereo using one pair of RCA analog stereo cables Digital coaxial using one S PDIF digital coaxial audio cable Digital optical using one TOSLINK digital optical audio cable Optionally connect an RS 232 device to the sender unit using a user supplied RS 232 cable NOTE The 1600HD Extender system will not cross the transmit and receive lines as a null modem adapter would All pins will pass straight through from one point to the other Connect 2 pairs
11. is a DVI device please set the DVI HDMI mode selector switch to DVI The extension distance can be up to 2km with single mode fiber optic cable and 500 meters 1640 feet with multi mode fiber optic cables while in this mode DVI mode does not support HDCP The audio source used for transmitting to the receiver can be selected from the front panel of the DVI 1600HD Extender sending unit Use the audio input selector button to cycle between the 3 available inputs The inputs are cycled as follows 5 analog stereo Coax digital S PDIF Optical digital TOSLINK All audio outputs on the receiver are constantly active This means that analog signal are converted to digital and digital signal are converted to analog The only exception to this is multi channel digital audio which will not be output through the analog stereo output 11 SPECIFICATIONS Video Amplifier Bandwidth 165 MHz Maximum ReSolution 1920x1200 1080p Input Connector analog audio 1 x Pair RCA L R stereo Input Connector digital audio 1 x S PDIF coaxial digital audio Input Connector digital audio 1 x TOSLINK optical digital audio Input Connector digital video 1 x DVI 29 pin Female Output Connector analog
12. lutions that are easy to implement and simple to operate The Gefen DVI 1600HD Extender The Gefen DVI 1600HD is a perfect solution for extending and managing control systems at great distances The DVI 1600HD sends HDMI or DVI at distances of 200m to 2km along with Audio and RS 232C The extension of RS232 signals helps create long distance control systems for AV integration or touch panel systems How It Works The Gefen DVI 1600HD system uses a Sender and Receiver methodology The DVI HDMI Audio RS232C source devices are plugged into the Sender module At the Receiver remote devices including an HD display plug into the Receiver module The proper length of fiber optic cable is connected between Sender and Receiver Power supplies for the modules are plugged into wall sockets and a crisp vibrant HD picture results When the front panel switch is in the HDMI position the DVI 1600HD sends HDMI with HDCP and DDC at up to 1080p resolution along with Audio and RS232C signals up to 200m away When the switch is in the DVI position the DVI 1600HD extends DVI at up to 1920x1200 resolution with Audio and RS 232C at distances of up to 2km 6 600 feet This mode does not support HDCP or DDC Note Display Data Channel DDC and High Bandwidth Digital Content Protection HDCP are used to ferry copy protected HDTV content The Gefen DVI 1600HD uses a DVI connector for video but HDMI can be sent by using inexpensive adapters or com
Download Pdf Manuals
Related Search