Home

Philips 3500 series Smart LED TV 42PFL3507K

1. AUDIO IN DVI VGA AUDIO IN DVI VGA EN 34 Connect devices Blu ray or DVD disc player Connect the disc player to the TV with an HDMI cable Connect the disc player to the TV with a component video cable Y Pb Pr and an audio L R cable EN 35 English TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable SAT is available on certain models only ANTENNA Connect the satellite or digital TV receiver to the TV with an HDMI cable HDMI Connect the satellite or digital TV receiver to the TV with a SCART cable EN 36 Connect the satellite or digital TV receiver to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR 01010 1e Connect the satellite or digital TV receiver to the TV with a composite cable CVBS and an audio LIR cable Video recorder Connect the recorder to the TV with an antenna cable SAT is available on certain models only ANTENNA English Connect the recorder to the TV with a SCART cable Connect the recorder to the TV with a component video cable Y Pb Pr and an audio L R cable EN 38 Game console Connect the game console to the TV with an HDMI cable Connect the game console to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR 01010 Je EN 39 English Home theatre Conne
2. When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance When the TV is in standby a startup splash screen is displayed then returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or press any key on the TV The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before you reconnect the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the 4 digit code to unlock the channel blocking feature child lock Enter 8888 EN 48 The TV or Smart TV menu is in the wrong language Change the menu to your preferred language For more information see Set up your TV gt Language settings gt Menu language Page 29 Available on certain models only Subtitles are not visible when you play a movie file from a USB storage device Subtitle files that are not hard coded into a video file for example srt sub idx are not supported You want to upgrade your TV software Visit www philips com support and download the latest software package
3. 2 Select Setup gt Channel settings gt Languages gt Visually impaired gt Audio effects 3 Select a setting then press OK e On Enable audio effects in the visually impaired audio e Off Disable audio effects in the visually impaired audio Choose type of speech 1 Press f 2 Select Setup gt Channel settings gt Languages gt Visually impaired gt Speech 3 Select a setting then press OK e Descriptive Hear descriptive speech in the visually impaired audio e Subtitles Hear subtitles in the visually impaired audio Other settings TV demo You can start a demo to find out more about the features on this TV Note Demos are not supported on MHEG channels 1 While you watch TV press 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press to exit Location To make sure that the correct TV settings are applied you can select where the TV is used Shop or home mode Select Home mode to access all TV settings In Shop mode you can access only limited settings 1 While you watch TV press 2 Select Setup gt TV settings gt Preferences 3 Select Location gt Home or Shop then press OK 4 Restart the TV Placement e Before you position the TV read all safety precautions See Get Started gt Important gt Safety Page 6 e Position the TV wher
4. screen saver 24 sensors 4 settings assistant 25 settings audio format 26 settings game 19 settings picture 25 settings sound 26 shop mode 31 sleeptimer 21 smart settings 14 TV 3 Smart TV applications 18 Smart Smart TV browse 18 Smart TV network 44 software check version 32 software digital update 32 software USB 32 sound settings reset 26 standby 12 subtitles analog 29 subtitles digital 30 subtitles language 30 sustainability 10 switch TV on off 12 EN 60 T ext 2 5 20 ext digital text 20 ext dual screen 19 ext enlarge 19 ext language 20 ext subpages 20 ext Table Of Pages 19 rademarks and copyrights 9 TV receiver connect 36 TV speakers mute 12 U universal access enable 30 universal access hearing impaired 30 universal access visually impaired 30 V VGA 34 visually impaired 30 volume 12 W wall mount 55 wallpaper 24 wireless dongle 45 Y YouTube 18 YPbPr component video 33 PHILIPS AY 2012 TP Vision Netherlands B V Al served Document order number 123007122
5. Network and the Internet Select a source From Home menu After you have added the new device to the Home menu you can select the new device icon to view its contents 1 Press ff 2 Select the device icon from the Home menu 3 Press OK to confirm EN 44 What you can do Note Network and Internet access are available on certain models only View Media If you connect the TV to a home network you can play photos music and videos from your computer See Use your TV gt View Media Page 16 Smart TV If you connect the TV to a home network with an Internet connection you can browse Smart TV Smart TV offers Internet services and websites tailored to your TV Play music watch videos and consult infotainment See Use your TV gt Browse Smart TV Page 18 What you need Warning This TV complies with the EMC directive only when you use a shielded Cats Ethernet cable e An ethernet cable e computer network that includes a A universal plug and play UPnP router and b A computer with one of the following operating systems Microsoft Windows XP Microsoft Windows Vista Mac OS X or Linux e To connect your TV to computers you also need media server software that is set to share files with your TV See Use your TV gt View media Page 16 e To connect your TV to the Internet you also need a high speed connection to the Internet Wired connection 1 Switch on the router
6. Press OK to confirm Tip Press E OPTIONS gt Subtitle language to change the subtitle language for a specific channel Universal access settings Hearing impaired access Tip To make sure that a hearing impaired audio language is available press amp OPTIONS then select Audio language Languages with an ear icon support hearing impaired audio To switch on hearing impaired audio and subtitles 1 While you watch TV press amp OPTIONS 2 Select Universal access gt Hearing impaired 3 Press a button to select an option e Red Switch off hearing impaired features e Green Switch on hearing impaired audio and subtitles 4 Press to exit Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired You can switch these features on or off 1 Press 2 Select Setup gt TV settings gt Preferences 3 Select Universal access gt On or Off then press OK EN 30 Visually impaired access Tip To make sure that a visually impaired audio language is available press B OPTIONS then select Audio language Languages with an eye icon support visually impaired audio To switch on visually impaired audio 1 While you watch TV press amp OPTIONS 2 Select Universal access 3 Press the Green button to select Visually impaired 4 Press a button to select an option e Red button Of
7. To remove the e sticker set the TV to Home mode then restart the TV See Set up your TV gt Other settings gt Location Page 31 The computer display on the TV is not stable e Make sure that your PC uses the supported resolution and refresh rate See Product specifications gt Display resolutions e Change the TV picture format to Unscaled EN 49 English Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction ake sure that all cables are properly connected ake sure that the volume is not muted or set to zero ake sure that the TV speaker setting is selected Press tt ADJUST select Speakers and then select TV ake sure that the TV audio output is connected to the audio input on the DMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers e Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still cannot hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions There is a picture but the sound quality is poor Make sure that the sound settings are correctly set There is a picture but sound comes from on
8. select WPS on the TV e If you want to set the PIN code in your router software to connect select WPS pin and note down the code e To enter the encryption key manually select Standard and enter the key when prompted EN 46 Set secured connection with WPS encryption 1 To set the secured connection with a PIN code select the WPS pin and press OK 2 Write down the 8 digit PIN code shown on TV and enter it in the router software on your PC See the router manual for where to enter the PIN code Set secured connection with WPA encryption If your router has WPA WiFi Protected Access security enter the pass phrase with the remote control 1 To enter the encryption key manually select Standard and press OK 2 To access the onscreen keyboard select the text entry field then press OK Set secured connection with WEP encryption If your router has WEP security the TV asks for the WEP encryption key in hexadecimal numbers 1 Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list 2 Enter the security key on the TV with the remote control to connect to the router 3 If prompted agree to the End User Licence Agreement Common interface What you can do You can watch scrambled digital TV channels with a Conditional Access Module CAM After the CAM is inserted and subscription fees are paid you can watch the
9. Low standby power The advanced power circuitry reduces the power consumption of the TV to an extremely low level without losing out on the constant standby functionality e Power management The advanced power management helps save the energy consumed by this TV To view how your personalised TV settings affect the TV s relative power consumption press then select Setup gt Watch demos gt Active Control EN 10 End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health EU energy label The European Energy Label informs you o
10. Motion JPEG mov only 1280x720 30 Mbps MPEG1 Layer1 2 MP3 MPEG2 AAC LC MPEG4 AAC LC HE AAC LV 40 H264 BP MP HP 1920x1080 40 Mbps ASP HL 4 0 MPEG SP L 3 0 1920x1080 40 Mbps wev9 1920x1080 40 Mbps VCA 1920x1080 40 Mbps wav PCM ADPCM A law PCM uaw PCM MPEG1 Layer1 2 MP3 MPEG2 AAC LC MPEG4 AAC LC HE AAC AC3 WMAv amp EN 53 English Supported audio video files Multimedia file names must not exceed 128 charactel Video codec Maximum resolution Max Frame Rate fps a Max Bit Rate Mbps XviD 1920x1080 40 Mbps MPEG1 768x576 1 8 Mbps MPEG2 MP HL 1920x1080 40 Mbps wav PCM ADPCM A law PCM u aw H264 BP MP HP LV40 1920x1080 40 Mbps PCM MPEG1 Layer 1 2 MP3 MPEG2 AAC LC MPEG4 AAC LC HE AAC AC3 WMAv8 MPEG4 SP L 3 0 ASP HL4 0 17201080 40 Mbps Motion JPEG 1280x720 30 Mbps 352x288 40 Mbps MPEG1 Layer1 2 MP3 MPEG2 AAC LC H 264 BP MP HP 1920x1080 40 Mbps MPEG4 AAC LC HE AAC 32 40 48 56 64 80 96 112 128 160 192 224 MP3 256 320 kbits s 16bit PCM big little endian 24bit PCM big endian PCM ADPCM A law PCM u lw PCM Supported DLNA compliant media server software DLNA is available on certain models only EN Windows Media Player for Microsoft Windows Twonky Media for M
11. Primary audio language or Secondary audio language to set the preferred audio languages then press OK 4 Select the language then press OK Select audio language If the TV channel broadcasts multiple or dual audio languages you can select the preferred audio language 1 While you watch TV press amp OPTIONS 2 Select Audio language for digital channels or Dual I II for analogue channels then press OK 3 Select from the available languages then press OK Subtitles on analogue channels 1 While you watch an analogue TV channel press TEXT 2 Enter the three digit page number of the subtitles page usually 888 If available subtitles are switched on 3 Press to exit text EN 29 English Subtitles on digital channels 1 While you watch a digital TV channel press amp OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or On during mute then press OK If you select On during mute subtitles are displayed only when you press 16 to mute the sound Note If an MHEG application is activated subtitles are not displayed Subtitle language For certain digital channels you can change the subtitle language 1 While you watch TV press 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select Primary subtitle language or Secondary subtitle language for the preferred language 4
12. You can play games consoles projected on a wide screen TV with excellent sound Before you start connect your game console to this TV See Connect your TV gt Connect devices gt Game console Page 39 For easy access add the game console to the Home menu 1 Press 2 Select Add your devices gt Game console then press OK 3 Follow the onscreen instructions to add the game console Select a page While you watch channels that broadcast text you can view the text 1 Select a channel that broadcasts text then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press CH CH to view the next or previous page e Press the Colour buttons to select a colour coded item 3 Press to exit Game setting The Game option in the Smart picture settings optimises the TV display for gaming without picture lag e If you add the game console to the Home menu as Game console the TV switches to the game setting automatically ef your game console is automatically added to the Home menu as a Blu ray disc player or DVD player set the Smart picture setting to Game before you start playing Switch to Game setting 1 Press tt ADJUST 2 Select Smart picture gt Game then press OK The TV is ready for gaming Note When your gaming session ends switch back to your usual Smart Picture setting Text options 1 Whi
13. and switch on its DHCP setting 2 Connect the router with an Etherne cable to the TV 3 Press ff then select Setup 4 Select Connect to network then press OK 5 Follow the onscreen instructions to install the network 6 Wait for the TV to find the network connection 7 If you are prompted agree to the End User Licence Agreement Connect r You can connect this TV to your home network through a wired or wireless connection e For a wired connection see Connect your TV gt Network and the Internet gt Wired connection Page 45 w CERTIFIED E k ey G e For a Wi Fi ready connection see Connect your TV gt Network and the Internet gt Wi Fi ready Page 45 Fe Wi Fi ready This section is only for Wi Fi ready TVs With the Philips wireless USB adapter PTAO1 sold separately you can connect the TV to your home network wirelessly You can enjoy the best of the Internet from Smart TV services and share content between your connected devices using DLNA Note The wireless network operates in the same 2 4GHz frequency spectrum as common household devices such as Dect phones microwave ovens or Bluetooth devices which can cause Wi Fi interference Move these devices away from the TV e To reduce network traffic switch off unused network equipment in the home network e Reception quality depends on the location of the wireless router and the local Internet servic
14. available when PC mode is selected in the Picture menu View programme guide You can view information about digital TV channels using programme guides provided by broadcasters This information can include e Channel schedules for the day Now and next or up to 8 days if supported by your broadcaster e Synopsis of programmes Note Programme guides are available in certain countries only Set programme guide Before you use the programme guide check the following settings 1 Press ff 2 Select Programme guide Access the TV programme guide 1 Press 2 Select Programme guide then press OK Use TV programme guide options You can customise the displayed information to e Remind you when programmes start e Display only preferred channels 1 In the programme guide press B OPTIONS 2 Select an option then press OK e Set reminder Set programme reminders e Clear reminders Clear programme reminders e Change day Select the day to display e Show info Display programme information e Search by genre Search TV programmes by genre e Scheduled reminders List programme reminders e Acquire EPG data Update the latest programme information EN 15 English View media What you can do You can play videos photos and music on your TV from e Your computer connected through the home network For models with network connector only e A U
15. for your TV Software installation instructions and release notes indicating what s been updated are also available at the site Full instructions on how to upgrade your TV software are also available at Set up your TV gt Update software Channel issues You want to install TV channels See Set up your TV gt Channel settings Page 26 for instructions on installing analogue or digital channels If you want to install satellite TV channels see Set up your TV gt Channel settings Page 28 No digital channels were found during the installation See the technical specifications to make sure that your TV supports DVB T DVB C or DVB S in your country e Make sure that all cables are properly connected and that the correct network is selected Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected You want to rearrange or reorder the channel list After channels have been installed they appear in the channel list For information about managing channel lists including rearranging channels see Watch TV gt Manage channel lists Picture issues The TV is on but there is no picture or the picture is distorted e Make sure that the antenna is properly connected to the TV e Make sure that the correct device is selected as the display source e Make sure that the external device or source is properly connected There is sound but no p
16. remote control to control play Play files from USB If you have photos videos or music files on a USB storage device you can play the files on TV Caution e TP Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Do not overload the USB port If you connect a USB storage device that consumes more than 500mA power make sure that it is connected to its own external power supply View USB contents 1 Connect the USB device to the USB connector on the TV 2 Press ff select Browse USB then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons on the remote control to control play See Use your TV gt View Media gt Play options Page 17 Play options Watch video Press the Navigation buttons to select a video file then press OK e Press Ill to pause e Press M to stop e Press 44 PP to search backward or forward e Press to exit the content browser Video playback options While you play video press amp OPTIONS to access the following video options e Subtitles Select the available subtitles settings e Audio language Select the available audio language e Repeat Repeat a video track or album e Show info Display the file name e Eco settings Select energy saving modes Listen to music Press the Navigation buttons
17. storage device 2 Press 3 Select Setup gt Update software then press OK The update assistant starts 4 Follow the onscreen instructions to start the update Note The update assistant directs you to the Philips support website See the installation instructions on the website to complete the update EN 32 Update from digital broadcast When available the TV can receive software updates through digital broadcasts When a software update is received you are prompted to update the software We strongly recommend that you update the software when prompted Follow the onscreen instructions Note To update the software later select f gt Setup gt Software settings gt Local updates Select the file that you downloaded and follow the onscreen instructions to complete the update Restore default settings You can reset all picture and sound settings and reinstall all TV channels on your TV 1 Press 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the onscreen instructions e Connect HDMI cables shorter than 5 5 Connect your Hein l feet TV HDMI RRRRR About cables Cable quality TV Overview Before you connect devices to the TV check the available connectors on the device gt Connect the device to the TV with the highest quality connection available Good K HDMI L quality connectors transfer picture an
18. the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 18 mm EN 56 For PFL31x7 32 inch to 40 inch TVs For PFL30x7 32 inch to 47 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic For PFL3507 37 to 42 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 17 mm For PFL38x7 32 to 46 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic For 50PFL38x7 Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic Help version UMv 123007122235 20120531 EN 57 English 8 Index A age rating 21 amplifier select output 23 analogue channels fine tune 27 analogue channels subtitles 29 audio language 29 audio sync 23 C CAM enable 47 CAM insert 47 CAM see Conditional Access Module 47 channel l
19. the most out of your DMI CEC compliant devices with Philips asyLink enhanced control features Connect our HDMI CEC compliant devices through DMI to your TV and control them at the same time with your TV remote control Note Other brands describe HDMI CEC functionality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink SS After you have switched on Philips EasyLink he following features are available One touch play When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC compliant devices switch to standby mode EN 21 English EasyLink remote control You can control multiple HDMI CEC compliant devices with your TV remote control System audio control If you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers Synchronise audio If you connect your TV to a home theatre you can synchronise the audio and video to avoid lag between the picture and sound Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link to retain picture quality Maxim
20. them Digital text If a digital TV channel s broadcaster offers dedicated digital text or interactive services you can view digital text Such channels such as BBC1 may have digital text with more interactive features Note Digital text services are blocked when subtitles are broadcast and switched on See Set up your TV gt Language settings gt Subtitles Page 30 When in digital text e Press the Navigation buttons to select or highlight items e Press the Colour buttons to select an option then press OK to confirm or activate Text 2 5 With Text 2 5 you can view text with more colours and better graphics than normal text If Text 2 5 is broadcast by a channel it is switched on by default To switch Text 2 5 on or off 1 Press 2 Select Setup gt TV settings gt Preferences 3 Select Text 2 5 gt On or Off then press OK EN 20 Set locks and timers Clock You can display a clock on the TV The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press amp OPTIONS 2 Select Clock then press OK The clock is displayed at the top right hand comer of the TV screen Change the clock mode You can change the clock mode to automatic or manual By default it is set to automatic mode which automatically synchronises it to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions cha
21. 6 Except for 22PFL32x7 You can mount your TV on the wall with a compatible TV mount sold separately Select the type of TV mount for your TV screen size 100 cm 39 inches 200 mm x 200 mm M6 102 cm 40 inches 400 mm x 300 mm M6 107 cm 42 inches For PFL30x7 400mm x 200mm M6 For PFL3507 and PFL32x7 400 mm x 400 mm M6 117 cm 46 inches 400 mm x 400 mm M6 119 cm 47 inches For PFL30x7 200mm x 200mm M6 For PFL3507 400mm x 400mm M6 127 cm 50 inches 400 mm x 400 mm M6 Warning Follow all instructions provided with the TV mount TP Vision Netherlands B V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors leave a gap of at least 5 5 cm 2 2 inches from the back of the TV For PFL35x7 19 inch to 24 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 9 mm max 10 mm EN 55 English For 32PFL3507 and 32PFL3307 For PFL32x7 32 to 42 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 16 mm For 32PFL3517 and 26PFL32x7 Before you mount the TV on the wall find
22. Control playback with the TV remote control play buttons Listen to another device when TV is in standby If available you can press Ht ADJUST to receive audio from a connected Philips EasyLink device while the TV is in standby mode Synchronise audio If your TV is connected to a home theatre and there is a lag between the picture and the sound you can synchronise them e If you are using a Philips home theatre the audio and video are automatically synchronised e For other home theatre brands you need to switch on the audio sync delay on the TV to synchronise the audio and video Switch on Audio Out Delay 1 Press 2 Select Setup gt TV settings gt Sound 3 Select Audio out delay gt On then press OK EN 23 English Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link Switch on Pixel Plus Link 1 Press 2 Select Setup gt TV settings gt EasyLink 3 Select Pixel Plus Link gt On then press OK View Scenea What you can do With Scenea you can display a picture as the wallpaper on your TV Display the default picture or load your own picture as the wallpaper The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer Maximise video display Some subtitles create a separate subtitle bar under the
23. D TV only 1680 x 1050 60 Hz 1920 x 1080 60 Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz For Full HD TV only 1920 x 1080 60 Hz Supported audio video files Multimedia file names must not exceed 128 characte Video codec Maximum resolution Max Frame Rate fps oy Max Bit Rate Mbps Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50 080i 50Hz 60 080p 24Hz 25 Multimedia z 60 Hz z z 30Hz 50Hz 60 Hz Supported multimedia connections e USB Connect only USB devices which consume 500mA of power or less NTFS FAT 16 Read only FAT 32 e Ethernet LAN RJ 45 Available on certain models only Supported image files e JPEG Xjpg Audio codec MPEG1 768x576 1 8 Mbps MPEG2 MP HL 1920x1080 40 Mbps MP1 Layer1 2 MP3 AC3 DVD LPCM MPEG2 MP HL 1920x1080 40 Mbps MPEG1 Layer1 2 AC3 VCA 1920x1080 40 Mbps H 264 BP MP HP LV 40 1920x1080 40 Mbps MPEG2 AAC LC MPEG4 AAC LC HE AAC AC3 H 264 BP MP HP 1920x1080 40 Mbps mov and 3gpp ASP HL 4 0 MPEG4 SP L 3 0 1920x1080 40 Mbps extensions are H263 not suppor z 1408x1152 40 Mbps
24. Ensure that the power plug is fully power socket Loose cause arcing or fire swivelled ensure that ed on the power cord Strain on the power cord can loosen connections and e To disconnect th cause arcing e TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of damage to the TV e Two people are required to lift and carry a TV that weighs more than 25kg or 55lbs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount TP Vision Netherlands B V bears no responsibility for improper wall mounting that result in accident injury or damage e f you need to store the TV disassemble the stand from the TV ever lay the TV on tts back with the stand installed e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different e Parts of this produc
25. Register your product and get support at www philips com welcome PFL30x7H PFL30x7T PFL30x7K PFL31x7H PFL31x7K PFL32x7H PFL33x7H PFL35x7H PFL35x7T PFL35x7K PFL38x7H PFL38x7T PFL38x7K EN User Manual PHILIPS Contents 1 Get started 3 TV tour 3 TV controls 4 Important information 6 Sustainability 10 Help and support 11 2 Use your TV 12 Watch TV 12 View programme guide 15 View media 16 Browse Smart TV 18 3 Use more of your TV 19 Play games 19 View Text 19 Set locks and timers 20 Use EasyLink 21 View Scenea 24 4 Set up your TV 25 Picture and sound 25 Channel settings 26 Satellite settings 28 Language settings 29 Universal access settings 30 Other settings 31 Update software 32 Restore default settings 32 5 Connect your TV 33 About cables 33 Connect devices 35 Connect more devices 42 Watch a connected device 44 Network and the Internet 44 Common interface 47 6 Troubleshooting 48 General issues 48 Channel issues 48 Picture issues 49 Sound issues 50 Connection issues 50 Network issues 51 Contact Philips 51 EN Product specifications 52 Power and reception 52 Display and sound 52 Display resolutions 53 Multimedia 53 Connectivity 54 Supported TV mounts 55 Help version 57 Index 58 1 Get started TV tour Media playback If you connect your TV to a USB storage device you can enjoy your movies music and pictures on a wide screen T
26. SB device connected to the TV Play files from computer What you need Available on certain models only e A wired or wireless home network connected with a Universal Plug and Play uPnP router e A Philips wireless USB adapter PTAO1 or a LAN cable that connects your TV to your home network e media server program running on your computer e Appropriate settings on your computer firewall to allow you to run the media server program Set up the network 1 Connect your TV and the computer to the same home network See Connect your TV gt Network and the Internet 2 Switch on your computer and the router Note If the apparatus does not retum to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required EN 16 Set up media sharing 1 Install a media server program on your computer to share media files Some of the media server programs available are as follows e For PC Windows Media Player 11 or higher or TVersity e For Mac Twonky 2 Switch on media sharing on your computer using the media server For more information on how to set up the media server refer to the media server s website Play files 1 Press 2 Select Browse network then press OK If the network installation starts follow the onscreen instructions 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons on the
27. V speakers automatically and stream TV audio to the connected HDMI CEC audio device Select speaker output with the adjust menu If EasyLink or EasyLink autostart is selected you can change how the TV audio is streamed to the connected HDMI CEC device 1 While you watch TV press ttf ADJUST 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was selected the TV prompts the connected device to switch to system audio mode With HDMI ARC compliant device If an HDMI ARC compliant device is connected through an HDMI ARC connector to the TV you can output TV audio through the HDMI cable You will not need an additional audio cable 1 Press 2 Select Setup gt TV settings gt EasyLink 3 Select HDMI1 audio out gt On 4 Select one of the following then press OK e On Hear the TV audio through the connected ARC compliant device e Off Hear the TV audio through the TV speakers or through a device connected through the digital audio out connector 5
28. V with excellent sound High Definition TV If your TV is equipped with a High Definition HD display you can watch HD video in the following ways and more e a Blu ray disc player connected with an HDMI cable playing a Blu ray disc e an upscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air HD broadcaster DVB T or DVB T2 MPEG4 e a digital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e an HD game console connected with an HDMI cable playing an HD game Smart TV You can make your TV the centre of your digital life with the Smart TV suite of applications e If you connect your TV to the home network you can share movies pictures and music from a computer or media server on your home network e If you connect your TV to the Internet you can enjoy a wealth of streaming movies pictures music and much more with Youtube Leanback and other Smart TV applications e Add a new dimension to your calls and contact your friends and relatives on he big screen You can make video calls on your TV with a Philips HD edia box and a Philips TV video camera both sold separately Enjoy HD video and excellent sound quality from the comfort of your sofa and start calling now Available on certain models only Programme guides You can find out what s on and what s com
29. ademark of Microsoft Corporation in the United States and or other countries Q1 DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HIGH DEFINITION MULTIMEDIA INTERFACE The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries K Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world amp dina DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living etwork Alliance LNA is applicable for PFL35x7 and PFL38x7 only All other registered and unregistered rademarks are the property of their respective owners J EN 9 English Sustainability Energy efficiency This TV is designed with energy efficient features To access these features press the green button on the remote control e Energy saving picture settings You can apply a combination of energy saving picture settings While you watch TV press the Green button then select Energy saving e Screen off If you only want to listen to audio from the TV you can switch off the TV display Other functions continue to operate normally e
30. ct the home theatre to the TV with an HDMI cable and an optical cable HDMI DIGITAL AUDIO OUT Connect the home theatre to the TV with a SCART cable Connect the home theatre to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR OTOLO CIO EN 40 Connect the home theatre to the TV with a composite cable CVBS and an audio L R cable AUDIO L R Digital camera Connect the digital camera to the TV with a USB cable For certain camera models only Digital camcorder Connect the digital camcorder to the TV with an HDMI cable EN 41 English Connect the digital camcorder to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR Connect the digital camcorder to the TV with a composite cable CVBS and an audio L R cable CVBS AUDIO UR ON 1e Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable EN 42 Computer Connect the computer to the TV with an HDMI cable Connect the computer to the TV with a DVI HDMI cable and an audio cable AUDIO IN E DVI VGA Ga SE SD lad AUDIO IN MK HDMI DVI VGA En SD AUDIO IN DVI VGA EN 43 English Watch a connected device Add new device Before you can watch a connected device e Add its icon to the Home menu for easy access See Connect your TV
31. d sound better The connections shown in this user manual are recommendations only Other solutions English are possible Y Pb Pr Tip If your device only has composite or RCA connectors se a SCART cneh Component video Y Pb Pr only transmits adapter to connect the device to a SCART video For sound also connect to Audio connector on the TV Left Right i e The Y Pb Pr connection can handle HDMI high definition HD TV signals e Match the Y Pb Pr connector colours to the cable plugs e An HDMI Audio Return Channel ARC nu connector allows output of TV audio to an HDMI ARC compliant device TV E 3 An HDMI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Connect HDMI for high definition HD TV signals and to switch on EasyLink EN 33 SCART CVBS A SCART connection combines video and CVBS only transmits video For sound also audio signals connect to Audio Left Right SCART connectors can handle RGB video e CVBS connections provide standard signals but cannot handle high definition HD picture quality TV signals e On certain models the video input socket on your TV is labelled as VIDEO wk AV IN or COMPOSITE CVBS AUDIO LR E VGA You can connect VGA to display PC content on the TV VGA only transmits video For sound also connect to AUDIO IN
32. d by microwave ovens DECT phones or other neighbouring Wi Fi devices e If the wireless network is not working try a wired network connection e Make sure that the firewalls in your network allow access to the TV wireless connection Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty If are not able to resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also consult and contribute to the Philips TV community at www supportforum philips com If you wish to speak to or email a Philips representative contact the Philips Consumer Care in your country You can find the contact details in the leaflet accompanying this TV or at www philips com support Note your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 51 English 7 Product spec ifications Power and reception Product specifications are subject to change without notice Power e Mains power AC 220 240 V 50 60 Hz e Standby power consumption lt 0 3 W e Ambient te Celsius e For power mperature 5 to 40 degrees consumption see the product specifications at www philips com support The power rating stated on the product typeplate is the power consumption for
33. dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction CE compliance ce his product is in compliance with the requirements and other relevant provisions of Directives 2006 95 EC Low Voltage and 2004 108 EC EMC Compliance with EMF TP Vision Netherlands B V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing he products Philips is committed to develop produce and market products that cause no adverse health effects TP Vision confirms that as ong as its products are handled properly for heir intended use they are safe to use according to scientific evidence available oday Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Trademarks and copyrights Windows Media is either a registered trademark or tr
34. dren from unsuitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press f 2 Select Setup gt Channel settings or Satellite settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Select the channel to lock or unlock then press OK 3 If prompted enter the child lock code with the Numeric buttons 4 Restart the TV to activate the lock Note If you access the channels from the channel list you are prompted to enter your lock code Parental rating You can set your TV to display only programmes with age ratings lower than your child s age This restriction only applies to digital channels from broadcasters that rate their programmes according to age 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Child lock gt Parental rating You are prompted to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks and timers gt Child lock Page 21 Use EasyLink What you can do You can get
35. e light does not shine directly on the screen e The ideal viewing distance of this TV is hree times its diagonal screen size For example if the diagonal screen size of he TV is 81 cm 32 the ideal viewing distance is 2 5 m 92 from the front of the screen e While seated your eyes should be level with the centre of the screen Stand mount or wall mount You can apply the best settings for your TV by selecting wall mount or stand mount 1 In the Preferences menu select TV position 2 Select On a TV stand or Wall mounted then press OK EN 31 English Update software Check version 1 Press 2 Select Setup gt Software settings gt Current software inf then press OK The version of the current software is displayed Caution Do not install a lower version of software than the current version installed on your product TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade Update the software through one of these methods e update with USB storage device e update from digital broadcast Update with USB Before you update the software make sure that you have e A USB storage device that has at least 256 megabytes of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB connector and Internet access Note Do not use a USB hard drive 1 Connect a USB
36. e provider e When playing video over your wireless home network we recommend that you use an IEEE 802 11 N router The connection speed may differ according to the operating environment of your wireless home network EN 45 English Start wireless setup 1 Switch on your wireless network router 2 Connect the Philips USB adapter PTA01 to a USB connector on the TV The wireless installation starts automatically 3 Follow the onscreen instructions Tip Keep the wireless USB adapter connected to the TV WPS Wi Fi Protected Setup 1 If your router supports WPS WiFi Protected Setup press the WPS button on the router 2 After 2 minutes select WPS on the TV then press OK The TV connects to your network This takes about 2 minutes Most new wireless routers have the WPS system and carry the WPS logo The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP Wired Equivalent Privacy security encryption If you still need the WEP devices in your network install with Scan gt Custom Scan for routers If you have several routers in your network you can select the network you need 1 To select a specific network router press Scan on the first page of the installation The routers with WPS and the strongest signal are shown first in the list on screen 2 Select the router you need then press OK e If you are connecting to a WPS router
37. e speaker only Make sure that sound balance is set to the centre EN 50 Connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device e If the TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again e If there are intermittent sound disruptions make sure that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HD o DVI cable make sure that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased When a HDMI CEC audio device is connected this behaviour is normal USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage device is compatible with the TV ake sure that the audio and picture file formats are supported by the TV Audio and p
38. empty channel numbers You can rename reorder or uninstall these channels 3 After you have found the correct channel select Done then press OK 4 Select Store as new channel then press OK to store the new TV channel Note If the reception is poor reposition your antenna and repeat the procedure Install analogue channels You can search and store analogue TV channels one by one Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual antenna installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual antenna installation menu select Find channel then press OK 2 Find the channel e If you know the channel frequency enter it with the Navigation buttons or Numeric buttons e If you do not know the channel frequency search for the next frequency that has a strong signal Select Search and then press OK Install digital channels If you know the channel frequency of the channels you want to install you can search and store digital channels one by one For best results contact the service provider 1 Press 2 Select Setup gt Channel settings gt Channel installation 3 Select Digi
39. ess 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Add and remove satellites You can add or remove satellites at any time and install channels from new satellites Note Before you add satellites make sure that the connection type is correct See Set up your TV gt Satellite Settings gt Install channels Page 28 1 Press ft gt Setup gt Search for satellite then press OK 2 Select Add satellite then press OK The TV searches for a satellite on the first free LNB This can take several minutes If no satellite is found check the antenna connections and the position of the dish antenna 3 If no satellite is found select Restart e If you are satisfied with the added satellite install the channels 4 To install all channels select Install The installation can take several minutes Remove a satellite 1 Press f gt Setup gt Search for satellite 2 Select Remove satellite then press OK 3 Select the satellite you want to remove then press OK Audio language Set default audio language For digital channels that are broadcast with multiple audio languages you can set your preferred audio languages The TV automatically switches to one of these languages if they are available 1 Press 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select
40. ettings while the channel installation settings remain the same 1 While you watch TV press 2 Select Setup gt TV settings gt Factory settings then press OK All TV settings except for channel settings are reset to the default factory settings Channel settings Automatic install When the TV was switched on for the first time a full installation of channels was performed To change your language country and reinstall all available TV channels you can run this full installation again Start installation 1 Press 2 Select Setup gt Search for channels gt Reinstall channels then press OK The Country menu is displayed 3 Select your country then press OK 4 Select your network then press OK e Antenna Access free to air antenna or digital DVB T channels e Cable Access cable or digital DVB C channels 5 Follow the onscreen instructions to select other options if any The start menu for channel search is displayed 6 Start channel search e If your channel service provider instructs you to change settings select Settings then press OK Follow the service provider s instructions to complete the installation e Otherwise select Start then press OK 7 Once the channel search is complete select Finish then press OK Tip Press LIST to see the channel list Note When digital TV channels are found the list of installed channels may display
41. eved adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained TP Vision Netherlands B V warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied TP Vision Netherlands B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of he TV indicates risk of electric shock ever remove the TV cover Always contact Philips Customer Care for service or repairs A _ A CAUTION DO NOT OPEN ATTENTION NE PAS OUVRIR PRECAUCION ADVERTENCIA RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD LED product has a high number of colour pixels Although it has effective pixels of 99 999 or more black
42. evel e Surround Switch on spatial sound e Auto volume levelling Automatically reduce sudden volume changes for example when switching channels e Headphone volume Change headphone volume e Balance Change the balance of the left and right speakers e Audio out delay Automatically sync the image on the TV to the audio from a connected home theatre e Audio out offset Change the setting for audio output delay You cannot select this setting if Audio out delay is not switched on e Digital output format Select audio output through the digital audio connector Select PCM to convert non PCM audio or Multichannel to output to home theatre e Digital output level Set the sampling rate for PCM audio Normal No loss in intensity or signal strength Low Certain amount of loss in intensity or signal strength EN 26 Select audio format lf a digital TV channel broadcaster streams audio in several formats you can select an audio format 1 Press 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select a setting then press OK e Preferred audio format Receive standard audio format MPEG or advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo If stereo broadcasting is available select mono or stereo audio 4 Press to exit Reset picture and sound You can restore the default picture and sound s
43. f Switch off visually impaired audio e Green button On Switch on visually impaired audio 5 Press to exit Note If the EasyLink remote control is switched on you cannot select the Green button To switch off EasyLink see Use more of your TV gt Use EasyLink gt What you need Page 22 Select audio from speakers or headphones You can choose to hear the visually impaired audio through the TV speakers headphones or both 1 Press ff 2 Select Setup gt Channel settings gt Languages gt Visually impaired gt Speakers Headphones 3 Select a setting then press OK e Speaker Hear visually impaired audio from speakers only e Headphone Hear visually impaired audio from headphones only e Speaker headphone Hear visually impaired audio from speakers as well as headphones Change volume for visually impaired audio 1 Press f 2 Select Setup gt Channel settings gt Languages gt Visually impaired gt Mixed volume 2 Press the Navigation buttons to change the volume then press OK 3 Press to exit Audio feedback for the visually impaired When you press a button on the remote control or TV you can set the TV to play a beep 1 In the Universal access menu press the Blue button to select Key beep 2 Press the Green button to turn on audio feedback or press the Red button to tum it off 3 Press 2 to exit Enable audio effects 1 Press f
44. gt Connect device Page 34 e Select from the Source menu Note If you connect an HDMI CEC compliant device to the TV through the DMI connector and switch it on the device will be automatically added to the ome menu 1 Connect and switch on the device 2 Press ff 3 Select Add new device then press OK 4 Follow the onscreen instructions e If you are prompted to select the TV connection select the connector that this device uses From Source menu You can also press SOURCE to display a list of connector names Select the connector that connects the device to the TV ress 2 SOURCE ress the Navigation buttons to select a nector in the list ress OK to confirm O N D3 uD we t Rename device After you have added a new device to the Home menu you can rename it 1 Press ff 2 Select the device icon from the Home menu 3 Press amp OPTIONS 4 Select Rename then press OK A text input box appears 5 Press the Numeric buttons and the Navigation buttons to select and enter the name 6 When complete select Done then press OK Remove device If the device is no longer connected to the TV you can remove it from the Home menu 1 Press 2 Select the device icon from the Home menu 3 Press Et OPTIONS 4 Select Remove device then press OK 5 Select Remove then press OK The selected device is removed from the Home menu
45. icrosoft Windows and Mac OS X Sony Vaio Media Server for Microsoft Windows TVersity for Microsoft Windows Nero MediaHome DixiM for Microsoft Windows XP Macrovision Network Media Server for Microsoft Windows Fuppes for Linux uShare for Linux 54 16 576 kbits s ACC LC HE AAC Connectivity Rear NETWORK Ethernet LAN RJ 45 available on certain models only Service port SERV U VGA PC input AUDIO IN DVI VGA stereo 3 5mm mini jack Composite and Audio CVBS Y Audio L R Component and Audio CVBS Y Pb Pr Audio L R DIGITAL AUDIO OUT Cinch SCART SCART RGB CVBS HDMI 1 2 Antenna 75 ohm coaxial SAT F pin Satellite available on certain models only Common Interface Cl USB On certain models there are 2 USB ports eadphones stereo 3 5mm mini jack DMI HDMI features Audio Return Channel HDMI 1 only Supported TV mounts You can mount your TV on the wall with a compatible TV mount sold separately Select the type of TV mount for your TV screen size 48 cm 19 inches 75 mm x 75 mm M4 56 cm 22 inches 75 mm x 75 mm M4 61 cm 24 inches 75mm x 75mm M4 66 cm 26 inches 75 mm x 75 mm M4 81 cm 32 inches For PFL38x7 PFL3517 PFL31x7 and PFL30x7 200 mm x 200 mm M6 For PFL3507 PFL33x7 and PFL32x7 2 9 00 mm x 100 mm M4 4 cm 37 inches For PFL30x7 200mm x 100mm M6 For PFL3507 200mm x 200mm M
46. icture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection ake sure that the antenna is properly connected to the TV Q Loud speakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices ake sure that the devices are connected properly ake sure that the picture settings are set correctly The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Change the picture format The picture format keeps changing with different channels Instead of the picture format Auto zoom select a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode
47. icture files on your USB storage device do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback Network issues This section is applicable to certain models only You want to establish a wireless connection between your TV and home network Refer to Connect your TV gt Network and the Internet gt Wi Fi ready Page 45 for instructions on how to connect your TV wirelessly to your home network Smart TV does not work Smart TV isavailable on certain models only Check that the router is properly connected o the TV and that your router has open access to the Internet If your router has a firewall or security settings make sure that it allows Smart TV data to pass through check your router documentation for details Open internet access via Smart TV is slow e Try to improve the signal quality between the router and TV if you are accessing the Internet wirelessly Refer to the router s documentation for details e Always use a fast broadband connection wherever possible e Update your TV with the latest software to ensure browsing speed is optimal Browse Network is slow If you are accessing your PC wirelessly refer to the router s documentation to improve the signal quality between the router and Wireless network is distorted or not found e Make sure that the wireless network is not disturbe
48. image Advance sharpness Enable superior sharpness especially on lines and contours in the picture Dynamic contrast Set the level at which the TV automatically enhances details in the dark middle and light areas of the picture Dynamic backlight Reduce power consumption by dimming the TV backlight to match the room lighting conditions MPEG artifact reduction Smooth he digital transitions in the picture Colour enhancement Change the colours to be more vivid and improve he resolution of details in bright colours Gamma Non linear setting for picture luminance and contrast PC mode When a PC is connected hrough HDMI change the picture format to Unscaled to display maximum detail Picture format Change the pict format Screen edges Change the picture size Picture shift Move the position of the picture You cannot select this setting if the selected picture format is 4 3 Auto fill Auto zoom or Wide screen Cc re EN 25 English More sound settings You can change the settings in the Sound menu 1 Press 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to change then press OK e Smart sound Access predefined smart sound settings e Reset Reset to factory default settings e Clear Sound Enhance the sound quality e Bass Change the bass level e Treble Change the treble l
49. ing up with the now and next EPG Electronic Programme guide or eight day EPG EasyLink f you connect your TV to HDMI CEC Consumer Electronic Control enabled devices such as a Blu ray player or home heatre you can control them at the same ime with one remote control Simply switch on EasyLink after connection Intuitive menus With the TV s intuitive menus you can easily access the channel or media file that you want or tweak the TV settings to suit your needs EN 3 English TV controls Rear controls For PFL38x7 PFL35x7 PFL33x7 42PFL32x7 32PFL32x7 PFL31x7 and PFL30x7 1 Standby Switch the TV on or off 2 CH Channel Switch to the next or previous channel 3 Source Access a connected device 4 lt Volume Increase or decrease volume EN 4 For 26PFL32x7 and 22PFL32x7 1 lt Volume Increase or decrease volume 2 CH AY Channel AW Switch to the next or previous channel 3 No function 4 Source Access a connected device 5 Standby Switch the TV on or off Sensors For PFL32x7 and PFL38x7 22 to 50 inch TVs For PFL35x7 19 to 24 inch TVs 1 Remote control sensor Point the remote control at the sensor Make sure that the line of sight between the remote control and the TV is not blocked by furniture or other objects For PFL30x7 PFL31x7 PFL33x7 and PFL35x7 32 to 47 inch TVs 1 Remote contr
50. ise display for subtitled video Some video subtitles can create a separate subtitle bar under the video which limits the video display area To maximise the video display area you can switch on auto subtitle shift and display the subtitles on top of the video image Switch off connecting device If your connecting device is not the active source you can save energy by setting the TV to switch it to standby What you need e Connect at least two HDMI CEC compliant devices through HDMI See Connect your TV gt Connect devices Page 34 e Configure each HDMI CEC compliant device properly e Switch on EasyLink Switch on EasyLink 1 Press f 2 Select Setup gt TV settings gt EasyLink gt EasyLink 3 Select On or Off then press OK EN 22 Control devices simultaneously If you connect multiple HDMI CEC devices that support this setting you can control all such devices through the TV remote control Note This is an advanced setting Devices that do not support this setting will not respond to the TV remote control 1 Press ff 2 Select Setup gt TV settings gt EasyLink 3 Select EasyLink remote control gt On or Off 4 Press OK to activate Tips e To switch back to TV control press then select Watch TV e To control another device press then select the device from the Home menu e To exit press D EasyLink buttons You can co
51. ist 13 channels 13 channels favourites 13 channels fine tune analogue 27 channels install automatic 26 channels install digital 27 channels install manual 27 channels install satellite 28 channels reinstall 32 channels rename 13 channels reorder 13 channels switch 13 channels update 28 child lock 21 clock 20 common interface 47 computer play files 16 Conditional Access Module 47 connect devices 33 connect digital camcorder 41 connect digital camera 41 connect disc player 35 connect external hard disk 42 EN 58 connect game console 39 connect home network 45 connect home theatre system 40 connect PC 43 connect recorder 37 connect TV receiver 36 connect USB 16 connected device add 44 connected device remove 44 connected device rename 44 connectors 33 contact information on Internet 11 contact Philips 11 D Q qd d levices add 44 lemo 31 evices 35 levices watch 44 igital camcorder 41 igital camera 41 igital channels 27 igital channels subtitles 30 igital radio 13 isc player connect 35 isplay 52 isplay resolution 53 DLNA 16 E EasyLink 21 EasyLink controls 22 EasyLink enable 22 EasyLink features 21 EasyLink onscreen control 6 EasyLink remote co
52. layed 2 Select the channel to rename then press B OPTIONS 3 Select Rename then press OK 4 Press the Navigation buttons to select each character then press OK e Press OK in the entry screen to enable the Onscreen Keyboard or e Press ABC or abc to select an uppercase or lowercase letter 5 Once complete select Done then press OK to confirm when prompted 6 Press to exit Reorder channels After the channels have been installed you can reorder the channel list While you watch TV press LIST The channel list is displayed 2 Press amp OPTIONS 3 Select Reorder then press OK 4 Select the channel to reorder then press OK 5 Press the Navigation buttons to move the highlighted channel to another location then press OK 6 Press amp OPTIONS 7 Select Done reordering then press OK Listen to digital radio If digital radio channels are available you can listen to them They are installed automatically when you install the TV channels 1 While you watch TV press LIST The channel list is displayed 2 Press amp OPTIONS 3 Select Select list gt Radio then press OK 4 Select a radio channel then press OK EN 13 English Select a source You can watch a connected device in one of the following ways e Add its icon to the Home menu for easy access then select it from the Home menu e Select from the Source menu Note If you co
53. le you view text press Et OPTIONS 2 Select an option e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen text Dual screen displays both the current channel and he text broadcast on two halves of the TV screen e T O P overview Table Of Pages T O P text broadcasts allow you to jump from one subject to another without entering page numbers e Enlarge Normal view Zoom in on he page Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to correctly display different character sets 3 Press Et OPTIONS to exit EN 19 English Text language For digital TV channels where the broadcasters provide different text languages you can select your preferred primary and secondary language 1 Press 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Primary Text or Secondary Text 4 Select a language then press OK Subpages If the text page contains several subpages you can view each subpage in succession These subpages are shown on a bar next to the main page number If subpages are available press 4 or gt to select
54. mpliant With EasyLink controls you can control your TV and other HDMI CEC devices with one remote control Access EasyLink controls 1 While you view content from a connected HDMI CEC device press amp OPTIONS 2 Select Show remote control then press OK 3 Select the EasyLink control button then press OK Read more about EasyLink in Use more of your TV gt Use EasyLink Page 21 EN 6 Safety Read and understand all instructions before you use your TV If da failure to follow the in warranty does not apply Risk of electric shock ever expose th he power outle mage is caused by structions the or fire e TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV di sconnect the TV from immediately Contact Philips Consumer Care to have the TV checked before use e ever place the TV remote control or batteries near nal heat sources inc To prevent the s candles or other ked flames or other uding direct sunlight pread of fire keep flames away from the TV remote cont times rol and batteries at all ever insert objects into the ventilation slots or other op ever expose th batteries to rain heat e Avoid force com inserted into the power plugs can e When the TV is no strain is exert enings on the TV e remote control or water or excessive ing onto power plugs
55. n the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the product on the Philips website for your country at www philips com TV Help and support Search the TV forum Your question may have already been answered by the Philips TV community of users Visit www supportforum philips com Use Help To access the onscreen Help menu press the Yellow button To switch between the Help menu and the TV menu press the Yellow button Visit the Philips website If you can t find what you need in the onscreen Help visit the Philips support website at www philips com support On the Philips support website you can also e Find answers to Frequently Asked Questions FAQ e Download a printable PDF version of his user manual e Email us a specific question e Chat online with Philips Consumer Care available in certain countries only Contact Philips You can contact Philips Consumer Care in your country for support The number is available in the leaflet accompanying this product or online at www philips com support Before you contact Philips write down the model and serial number of you
56. nge the clock mode to Manual 1 While you watch TV press 2 Select Setup gt TV settings gt Preferences 3 Select Clock gt Auto clock 4 Select Automatic or Manual then press OK Enable or disable daylight saving time You can enable or disable daylight saving time depending on your region Before you enable or disable daylight saving time set the clock mode to Auto clock gt Manual 1 In the Clock menu select Daylight saving 2 Select Daylight saving time or Standard time then press OK Daylight saving time is enabled or disabled Set the clock manually You can set the date and time manually Before you start set the clock mode to Manual 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection 3 Select Done then press OK Sleeptimer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleeptimer 1 Press f 2 Select Setup gt TV settings gt Preferences gt Sleep timer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of ten minutes To switch off the sleeptimer set it to zero minutes 4 Press OK to activate the sleep timer After the specified time the TV switches to standby Child lock To protect chil
57. nnect an HDMI CEC compliant device to the TV it is automatically added to the Home menu Add new device 1 Connect and switch on the device 2 Press 3 Select Add new device then press OK 4 Follow the onscreen instructions e If you are prompted to select the TV connection select the connector that this device uses View from Home menu After you have added the new device to the Home menu you can select its icon to start using it 1 Press 2 Select the device icon from the Home menu 3 Press OK to confirm View from Source menu You can also press J SOURCE to display a list of connector names Select the connector that connects the device to the TV 1 Press SOURCE 2 Press the Navigation buttons to select a connector in the list 3 Press OK to confirm EN 14 Use smart settings Your TV comes with smart picture and sound settings You can apply these settings or customise them Select your preferred picture setting 1 While you watch TV press tt ADJUST 2 Select Smart picture 3 Select an option then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing Natural Natural picture settings Cinema Ideal settings for movies e Game Ideal settings for games e Energy saving Settings that conserve the most energy Standard Default settings that suit most envir
58. ntrol HDMI CEC compliant devices with the following buttons on the TV remote control e O Switch the TV and the connected device on or to standby e Play buttons Control video or music play e Numeric buttons Select a title chapter or track e OK Start pause or resume play on the connected device activate a selection or access the device menu e lt 44 PP Search backwards and forwards on the connected device e ft Display the TV Home menu You can also control devices through other EasyLink buttons that are available through the On Screen Remote Control OSRC To access the OSRC 1 While you view content from a connected device press amp OPTIONS 2 Select Show remote control then press OK 3 Select an onscreen button then press OK 4 Press 5 to exit Select speaker output If the connected device is HDMI CEC compliant you can output TV audio through an HDMI cable Make sure that you connect the device to the HDMI connector on the TV See Connect your TV gt About cables gt HDMI Page 33 Configure TV speakers 1 Press 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select an option then press OK e Off Switch off TV speakers e On Switch on TV speakers e EasyLink Stream TV audio through the HDMI CEC device Switch the TV audio to the connected HDMI CEC audio device through the Adjust menu e EasyLink autostart Switch off T
59. ntrol buttons 22 EasyLink TV speakers 23 end of use 10 energy efficient settings 10 Energy label 11 EPG Electronic Programme Guide 3 external hard disk 42 F favourite channels list 13 G game console 39 games 19 H DMI 33 DMI ARC 33 hearing impaired 30 help onscreen 11 Help version 57 high definition HD content 3 home mode 31 home network 44 home theatre system connect 40 install channels automatic 26 K kensington lock 8 L language menu 29 language subtitles 30 location home or shop 31 M media server program 16 mode home or shop 31 multimedia play files 16 multimedia supported formats 53 N network connect 44 P parental rating 21 PC connect 43 PC display resolutions 53 picture format 15 picture settings 25 picture settings reset 26 Pixel Plus link 24 placement stand or wall mount 31 position 31 power 52 product support 11 R rear controls 4 recorder connect 37 recycle 10 reinstall 32 remote control 5 remove connected device 44 rename channels 13 rename connected device 44 EN 59 English S safety 6 satellite add or remove 29 satellite install channels 28 satellite settings 28 SCART 34 Scenea enable 24 Scenea load wallpaper 24 screen care 8
60. o Available on certain models only With Internet Applications Apps specially adapted Internet websites for your TV you can watch videos online Note e Smart TV services and apps vary from country to country e Smart TV displays one page at a time in full screen e Certain websites may not display completely Functions that require plug ins may be unavailable e TP Vision Netherlands B V bears no responsibility regarding the content and he quality of the content provided by he content service providers What you need 1 On your home network connect the TV to the Internet 2 On your home network connect a router with a high speed connection to the Internet 3 Switch on the router 4 Install the network See Connect your TV gt Network and the Internet ws wy EN 18 Access Smart TV Applications Apps If your TV is connected to the Internet through your home network you can watch YouTube videos and view media files from your home network YouTube Leanback 1 Press 2 Select YouTube then press OK 3 Follow the onscreen instructions to watch videos 4 Press to exit Browse network 1 Press 2 Select Browse network then press OK 3 Select the network to connect 4 Press the Navigation buttons to select a file then press OK 5 Press to exit U U 3 Use more of your TV Play games View Text Add a game console
61. ol sensor Point the remote control at the sensor Make sure that the line of sight between the remote control and the TV is not blocked by furniture or other objects Remote control 1 Standby Switch the TV on or to standby 2 Play buttons Control playback of media files 3 SOURCE Access a connected device 4 FORMAT Change picture format 5 TV Switch source to watch TV NZ 6 ft Home Access the Home menu 7 OK Confirm an entry or selection 8 AW lt 4 P Navigation buttons Navigate through menus and select items D 11 gJ ADJUST OPTIONS 9 LIST Access the TV channel list 10 INFO Display information about current activity 11 tt ADJUST Adjust TV settings 12 BG OPTIONS Access currently available options 13 Back Return to the previous menu page or exit from a TV function 14 CH CH Switch channels 15 Volume Adjust volume 16 1 amp Mute Mute or restore audio EN 5 English ver 3 mo 6 waz 9 17 Colour buttons Select tasks or options The buttons function according to the services offered by the service provider 18 SUBTITLE Switch subtitles on or off 19 0 9 Numeric buttons Select TV channels or enter text 20 TEXT Enable or disable text Important information EasyLink controls Note EasyLink controls are available when the connected device is HDMI CEC co
62. on the remote control e Press lt J on the side of the TV C Da Mute or unmute the TV volume e Press 1 amp on the remote control to mute the volume e Press 16 again to restore the volume Adjust headphone volume 1 Press f gt Setup gt TV settings gt Sound 2 Select Headphone volume then press OK Switch TV channels e Press CH on the remote control or TV e Press the Numeric buttons to enter a channel number Manage favourites You can view all channels or only a list of your favourite channels so that you can find them easily Press LIST to access the channel list Create a list of your favourite channels 1 Press LIST 2 Select the channel to mark as a favourite then press OPTIONS 3 Select Mark as favourite then press OK The selected channel is marked To deselect a channel select Unmark as favourite and then press OK Select a channel list Press LIST then press amp OPTIONS 2 Select Select list gt Favourite to display channels in the favourite list or AIl to display all channels 3 Press OK to confirm Manage channel lists After the channels have been installed you can manage them e Rename channels e Reorder channels e Listen to digital radio Rename channels You can rename channels The name appears when the channels are selected 1 While you watch TV press LIST The channel list is disp
63. onments and types of video Photo Ideal settings for photos e Custom Customise and store your own picture settings Select your preferred sound setting 1 While you watch TV press tt ADJUST 2 Select Smart sound 3 Select an option then press OK e Personal Apply your personalised sound setting e Standard Settings that suit most environments and types of audio e NEWS Ideal settings for spoken audio such as the news e Cinema Ideal settings for movies e Game Ideal settings for games e DRAMA Ideal settings for drama programmes e SPORTS Ideal settings for sports Change picture format You can change the picture format to suit the video source 1 Press 3 FORMAT 2 Select a picture format then press OK to confirm The available picture formats depend on the video source e Auto fill Adjust the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e 4 3 Display the classic 4 3 format e Movie expand 16 9 Scale 4 3 format to 16 9 Not recommended for HD or PG e Wide screen Stretch 4 3 format to 16 9 e Unscaled Provide maximum detail for PC Only
64. programme This TV supports Cl as well as CI Cl supports premium HD digital programmes with a high level of copy protection Note The applications functions content and onscreen messages depend on the CAM service provider What you need Caution To protect the CAM from damage insert the CAM as instructed Note Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV Push the CAM in as far as it will go 3 Switch on the TV then wait for the CAM to be activated This takes a few minutes To maintain access to encrypted digital TV channels leave the CAM in the slot Watch CAM services 1 After you insert and activate the CAM press amp OPTIONS 2 Select Common interface then press OK 3 Select the CAM provider then press OK EN 47 English 6 Troubleshooting General issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Make sure that the power cable is securely connected The TV does not respond to remote control or front controls when switched on The TV requires some time to start up During this time the TV does not respond to the remote control or front controls This is normal behaviour
65. r TV You can find this information on the back of your TV or on the TV packaging EN 11 English 2 Use your TV Watch TV Switch TV on or off am D gt Switch the TV on e Press the power switch on the TV e If the TV is in standby press on the remote control Note There is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press CH on the TV Switch TV to standby Press on the remote control The remote control sensor on the TV switches to red Switch off the TV Press on the TV The TV switches off Note Though your TV consumes very little energy when it is in standby or switched off it does use some energy If you are not going to use the TV for an extended period of time disconnect the TV from the mains plug EN 12 Automatic switch off You can save energy with this TV s energy efficiency settings The settings are enabled by default so that if there is no user interaction such as pressing a remote control button or a control on the rear panel for four hours the TV will automatically switch to standby To disable automatic switch off 1 While you watch TV press the Green button on the remote control 2 Select Auto switch off then press OK 3 Use the Navigation buttons to make a selection then press OK Adjust TV volume Increase or decrease the TV volume e Press
66. ructions to complete the installation 4 Once complete select Finish then press OK Select connection type While you install satellite channels you need to set the connection type The number of LNBs on your dish antenna determines the number of satellite channels you can install 1 After you select Reinstall channels select Settings and then press OK 2 Select Connection type 3 Select a setting then press OK e OneLNB Select if you have only one LNB e DiSeqC Mini 2 LNBs Select if you have 2 LNBs e DiSeqC 1 0 3 4 LNBs Select for 3 or 4 LNBs Test signal strength If a channel or transponder is skipped during installation you can test the signal strength of a satellite or add a new channel 1 While you watch TV press f 2 Select Setup gt Search for satellite gt Satellite reception test then press OK 3 Select the LNB 4 If you know the frequency of the transponder which can include several channels select Frequency and enter it 5 Select Search then press OK 6 If a new frequency is found press Store to add the new transponder with its channels Update satellite channels 1 While you watch TV press f 2 Select Setup gt Search for satellite gt Update channels 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish then press OK Language settings Menu language 1 While you watch TV pr
67. ss OK 6 Press any button to exit Scenea 4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant which demonstrates the effect of your chosen setting immediately 1 While you watch TV press 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Continue then press OK 4 Follow the onscreen instructions to choose your preferred settings More picture settings You can change the settings in the Picture menu 1 Press f 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust then press OK e Smart picture Access predefined smart picture settings e Reset Reset to default factory settings e Backlight Change the brightness of the TV to match the lighting condition e Video contrast Change the intensity of the bright areas keeping dark areas unchanged e Brightness Change the intensity and details of the dark areas e Colour Change colour saturation e Sharpness Change sharpness e Noise reduction Filter and reduce noise Tint Change the colour balance Custom tint Customise tint setting Only available if Tint gt Custom is selected Digital Crystal Clear Control advanced settings to fine tune each pixel to match surrounding pixels Produce a brilliant high definition
68. t may be made of glass Handle with care to avoid injury and damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV ona surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is
69. tal Reception test gt Find channel then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the channel is found select Store then press OK 7 Press to exit Note If your cable provider does not provide you with a specific symbol rate value for DVB C channels select Automatic in Symbol rate mode Fine tune analogue channels If the reception of an analogue TV channel is poor you can fine tune the TV channel 1 Press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual antenna installation gt Fine tune and then press OK 4 Press or W to fine tune the channel 5 When you have selected the correct channel frequency select Done and then press OK 6 Select an option then press OK e Store current channel Store the channel as the current channel number e Store as new channel Store the channel as a new channel number EN 27 English Update channel list When the TV was switched on for the first time a full installation of channels was performed By default when there are changes to these channel lists the TV updates them automatically You can also switch off the automatic update or manually update the channels Note If you are prompted to enter a code enter 8888 Automatic update To add or remove digital channels automatically leave
70. the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list Switch off the channel update message If a channel update is performed a message is displayed at startup You can switch off this message 1 Press 2 Select Setup gt Channel settings or Satellite settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK To switch off automatic updates In the Channel installation menu select Automatic channel update gt Off Update channels manually 1 Press f 2 Select Setup gt Search for channels gt Update channels then press OK 3 Follow the onscreen instructions to update the channels EN 28 Satellite settings What you can do View satellite channels Note e Satellite signal is available on certain models only Search for satellite is only available if the TV supports DVB S e To receive satellite channels connect a satellite receiver to the SAT connector on your TV LNBs This TV can receive signals from 4 different low noise block down converters LNBs An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite Install satellite channels Install satellite channels 1 While you watch TV press 2 Select Setup gt Search for satellite gt Reinstall channels 3 Follow the onscreen inst
71. this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between electrical safety Reception brackets is used for IEC 60065 Ed 7 2 e Antenna input 75 ohm coaxial IEC75 e TV system DVB COFDM 2K 8 K e Video playback NTSC PAL SECAM e Digital TV DVB S S2 PEG 4 DVB T Terrestrial DVB T2 DVB C Cable Satellite e Tuner bands VHF UHF S Channel yperband Available EN 52 on certain models only Display and sound Pictu e Sound re Display Display type edge LCD LED backlight Diagonal size 48 cm 19 inch 56 cm 22 inch 61 cm 24 inch 66 cm 26 inch 81 cm 32 inch 94 cm 37 inch 100 cm 39 inch 107 cm 42 inch 117 cm 46 inch 119 cm 47 inch 127 cm 50 inch Aspect ratio 16 9 widescreen Panel resolution For HD models 1366 X 768 p For FHD models 1920 X 1080 p Digital Crystal Clear Perfect Motion Rate PMR 100 Hz Output power RMS For 19 6 W For 22PFL35x7 10 W For 22PFL32x7 6 W For 24 and 26 10 W For 32 and 50 20 W Incredible Surround Clear Sound Mono Stereo NICAM Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 720 60 1280 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz For Full H
72. to select a music track then press OK e Press Ill to pause e Press M to stop e Press lt 4 PP to search backward or forward within a music track e Press to exit content browser Music playback options Press E OPTIONS to access or exit the following music options e Repeat Repeat a track or an album e Play once Play the track once e Shuffle on Shuffle off Enable or disable random play of tracks e Show info Display the file name e Eco settings Select energy saving modes View pictures Press the Navigation buttons to select a picture then press P to start the slideshow e Press II to pause e Press M to stop e Press Navigation buttons to search for a picture e Press 3 to exit content browser Picture slideshow options Press amp OPTIONS to access or exit the following picture options e Slideshow transitions Select the transition from one picture to the next e Slideshow frequency Select the display time for each picture in the slideshow e Repeat Play once View slideshow once or repeatedly e Shuffle off Shuffle on Enable or disable random display of pictures in the slideshow e Rotate image Rotate the picture e Show info Display the picture information e Setas Scenea Load the selected picture as the TV wallpaper See Use more of your TV gt View Scenea Page 24 EN 17 English Browse Smart TV What you can d
73. transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet EN 7 English Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e Avoid stationary images as much as possible Stationary images are images hat remain onscreen for extended periods of time Stationary images include onscreen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV To secure the TV purchase a Kensington anti theft lock sold separately EN 8 Notice 2012 TP Vision Netherlands B V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners TP Vision Netherlands B V reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is beli
74. video that limits the video display area To maximise the video display area you can switch on auto subtitle shift The subtitles are then displayed over the video image Switch on auto subtitle shift 1 Press 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Note Make sure that the picture format of the TV is set to Auto format or Movie expand 16 9 Switch on 1 Press 2 Select Scenea then press OK The default picture is displayed Note The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer For information about the sleeptimer see Use more of your TV gt Set locks and timers gt Sleeptimer Page 21 Switch off connecting device You can set the TV to switch off connecting HDMI CEC compliant devices if they are not the active source The TV switches the connecting device to standby after 10 minutes of inactivity 1 Press f 2 Select Setup gt TV settings gt EasyLink 3 Select Auto switch off devices gt On then press OK to activate EN 24 Load TV wallpaper You can also load your own picture as the wallpaper Note When you load a new picture it overrides the existing picture 1 Connect the USB storage device to the TV 2 Press 3 Select Browse USB then press OK 4 Select a picture then press OPTIONS 5 Select Set as Scenea then pre

Philips 3500 series Smart LED TV 42PFL3507K

Contents

Download Pdf Manuals

Related Search

Related Contents