Home

Philips 3000 series 32PFL3017H 32" Full HD Black

Contents

1. Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage e _ Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e _ To avoid deformations and colour fading wipe off water drops as soon as possible e _ Avoid stationary images as much as possible Stationary images are images hat remain onscreen for extended periods of time Stationary images include onscreen menus black bars ime displays etc If you must use stationary images reduce scre
2. For PFL3507 200mm x 200mm M6 107 cm 42 inches For PFL30x7 400mm x 200mm M6 For PFL3507 400mm x 400mm M6 119 cm 47 inches For PFL30x7 200mm x 200mm M6 For PFL3507 400mm x 400mm M6 Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors leave a gap of at least 5 5 cm 2 2 inches from the back of the TV EN 58 For PFL35x7 19 inch to 24 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 9 mm max 10 mm For PFL30x7 32 inch to 47 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic For PFL3507 32 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic min 16 mm For PFL3517 32 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length
3. You can add or remove satellites at any time and install channels from new satellites Note Before you add satellites make sure that the connection type is correct See Set up your TV gt Satellite Settings gt Install channels Page 31 1 Press ft gt Setup gt Search for satellite then press OK 2 Select Add satellite then press OK The TV searches for a satellite on the first free LNB This can take several minutes If no satellite is found check the antenna connections and the position of the dish antenna 3 If no satellite is found select Restart e _ If you are satisfied with the added satellite install the channels 4 To install all channels select Install The installation can take several minutes Remove a satellite 1 Press f gt Setup gt Search for satellite 2 Select Remove satellite then press OK 3 Select the satellite you want to remove then press OK EN 31 English Language settings Menu language 1 While you watch TV press ff 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Subtitles on analogue channels 1 While you watch an analogue TV channel press TEXT 2 Enter the three digit page number of the subtitles page usually 888 If available subtitles are switched on 3 Press ft to exit text Audio language Set default audio la
4. e Make sure that the wireless network is not disturbed by microwave ovens DECT phones or other neighbouring Wi Fi devices e If the wireless network is not working try a wired network connection e _ Make sure that the firewalls in your network allow access to the TV wireless connection EN 54 Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty If are not able to resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also consult and contribute to the Philips TV community at www supportforum philips com If you wish to speak to or email a Philips representative contact the Philips Consumer Care in your country You can find the contact details in the leaflet accompanying this TV or at www philips com support Note your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 7 Product specifications Power and reception Product specifications are subject to change without notice Power e Mains power AC 220 240 V 50 60 Hz e Standby power consumption lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius e For power consumption see the product specifications at www philips com support The power rating stated on the product typeplate
5. If your TV is equipped with a High Definition HD display you can watch HD video in the following ways and more e a Blu ray disc player connected with an HDMI cable playing a Blu ray disc e an upscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air HD broadcaster DVB T or DVB T2 MPEG4 e a digital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e an HD game console connected with an HDMI cable playing an HD game Programme guides You can find out what s on and what s coming up with the now and next EPG Electronic Programme guide or eight day EPG EasyLink f you connect your TV to HDMI CEC Consumer Electronic Control enabled devices such as a Blu ray player or home heatre you can control them at the same ime with one remote control Simply switch on EasyLink after connection Smart TV You can make your TV the centre of your digital life with the Smart TV suite of applications e _ If you connect your TV to the home network you can share movies pictures and music from a computer or media server on your home network Enjoy a wealth of streaming media content and much more with YouTube Leanback and Smart TV e While you watch a digital channel you can Pause TV at any time and catch up with the broadcast later The broadcast is stored on a USB hard drive e _ Add a new dimensi
6. Select a source From Home menu After you have added the new device to the Home menu you can select the new device icon to view its contents 1 Press ff 2 Select the device icon from the Home menu 3 Press OK to confirm What you can do Note Network and Internet access are available on certain models only View Media If you connect the TV to a home network you can play photos music and videos from your computer See Use your TV gt View Media Page 16 Smart TV If you connect the TV to a home network with an Internet connection you can browse Smart TV Smart TV offers Internet services and websites tailored to your TV Play music and videos consult infotainment rent movies and much more See Use your TV gt Browse Smart TV Page 18 EN 47 English What you need Warning This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable e An Ethemet cable that is shorter than 3 metres e A computer network that includes a A universal plug and play UPnP router and b A computer with one of the following operating systems Microsoft Windows XP Microsoft Windows Vista Mac OS X or Linux e To connect your TV to computers you also need media server software that is set to share files with your TV See Use your TV gt View media Page 16 e To connect your TV to the Internet you also need a high speed connection to the Internet Wired con
7. There is a picture but sound comes from one speaker only Make sure that sound balance is set to the centre Connection issues There are problems with HDMI devices e _ Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device e If the TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again e If there are intermittent sound disruptions make sure that output settings from the HDMI device are correct e _ If you use an HDMI to DVI adapter or HD o DVI cable make sure that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased When a HDMI CEC audio device is connected this behaviour is normal USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage device is compatible with the TV ake sure that the audio and picture file formats are
8. indicators A When the programme was paused for the first time B Where the paused programme is currently playing C Where the live programme is currently broadcast e _ To watch the stored broadcast press 44 or PP to search backward or forward e To watch the live TV broadcast press E e To change playback speed press 4 or PP repeatedly The stored broadcast on the USB hard drive is deleted if you e _ Disconnect the USB hard drive e _ Switch the TV to standby e _ Switch to another channel e Switch source to watch from a connected device a Blu ray disc player or digital receiver EN 20 Play games Add a game console You can play games consoles projected on a wide screen TV with excellent sound Before you start connect your game console to this TV See Connect your TV gt Connect devices gt Game console Page 42 For easy access add the game console to the Home menu 1 Press ff 2 Select Add your devices gt Game console then press OK 3 Follow the onscreen instructions to add the game console Game setting The Game option in the Smart picture settings optimises the TV display for gaming without picture lag e If you add the game console to the Home menu as Game console the TV switches to the game setting automatically e _ If your game console is automatically added to the Home menu as a Blu ray disc player or DVD player set the Smart picture se
9. A confirmation message is displayed Adjust TV volume Increase or decrease the TV volume e Press on the remote control e Press lt J on the side of the TV C a Mute or unmute the TV volume e _ Press 16 on the remote control to mute the volume e _ Press 1x again to restore the volume Adjust headphone volume 1 Press ft gt Setup gt TV settings gt Sound 2 Select Headphone volume then press OK Switch TV channels e _ Press CH on the remote control or TV e _ Press the Numeric buttons to enter a channel number Manage favourites You can view all channels or only a list of your favourite channels so that you can find them easily Press LIST to access the channel list Create a list of your favourite channels 1 Press LIST 2 Select the channel to mark as a favourite then press OPTIONS 3 Select Mark as favourite then press OK The selected channel is marked To deselect a channel select Unmark as favourite and then press OK Select a channel list Press LIST then press OPTIONS 2 Select Select list gt Favourite to display channels in the favourite list or All to display all channels 3 Press OK to confirm Manage channel lists After the channels have been installed you can manage them e Rename channels e Reorder channels e _ Listen to digital radio Rename channels You can rename channel
10. Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 1280 x 1024 60 z 1360 x 768 60 z 1920 x 1080 60 EN 56 Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080i 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz Multimedia Supported multimedia connections e USB Connect only USB devices which consume 500mA of power or less NTFS FAT 16 Read only FAT 32 e _ Ethernet LAN RJ 45 Available on certain models only Supported image files e JPEG jpg Supported audio video files Multimedia file names mu Supported audio video files Multimedia file names mu File Extensions Container Video codec Maximum resolution st not exceed 128 characte Max Frame Rate fps pj S Max Bit Rate Mbps Audio codec mpg MPEG1 768x576 30 1 8 Mbps mpeg Ps vob MPEG2 MP HL 1920x1080 30 MP1 Layer1 2 MP3 AC3 DVD LPCM 40 Mbps MPEG2 MP HL 1920x1080 30 40 Mbps MPEG Layer1 2 AC3 vC 1920x1080 30 40 Mbps H 264 BP MP HP ivan 1920x1080 30 MPEG2 AAC LC MPEG4 AAC LC 40 Mbps HE AAC AC3 H 264 BP MP HP ivan 1920x1080 30 40 Mops pt MPEG4 SP L 3 0 mov and 3gpp ASP HL4 0 TONIN 30 40 Mbps MPEG Layer1 2 MP3 MP
11. Microsoft Windows Twonky Media for Microsoft Windows and Mac OS X Sony Vaio Media Server for Microsoft Windows TVersity for Microsoft Windows Nero MediaHome DixiM for Microsoft Windows XP Macrovision Network Media Server for Microsoft Windows Fuppes for Linux uShare for Linux 16 576 kbits s ACC LC HE AAC Connectivity Rear e NETWORK Ethernet LAN RJ 45 available on certain models only e _ Service port SERV U e VGA PC input e AUDIO IN DVI VGA stereo 3 5mm mini jack e Composite and Audio CVBS Y Audio UR e Component and Audio CVBS Y Pb Pr Audio L R e DIGITAL AUDIO OUT Cinch e SCART SCART RGB CVBS e HDMI 1 2 e Antenna 75 ohm coaxial EN 57 English e SAT F pin Satellite available on certain models only Side e Common Interface Cl e USB On certain models there are 2 USB ports eadphones stereo 3 5mm mini jack e DMI HDMI features e _ Audio Retum Channel HDMI 1 only Supported TV mounts You can mount your TV on the wall with a compatible TV mount sold separately Select the type of TV mount for your TV screen size 48 cm 19 inches 75mm x 75mm M4 56 em 22 inches 75mm x 75mm M4 61 cm 24 inches 75mm x 75mm M4 81 cm 32 inches For PFL30x7 and PFL351 7 200mm x 200mm M6 For PFL3507 200mm x 100mm M4 94 cm 37 inches For PFL30x7 200mm x 100mm M6
12. Select On then press OK to activate Note Make sure that the picture format of the TV is set to Auto format or Movie expand 16 9 EN 25 English Listen to another device while TV is in standby You can listen to a connected HDMI CEC compliant device through the TV speakers even while the TV is in standby 1 Press tt ADJUST to receive audio from the connected Philips EasyLink device If available audio only mode is switched on 2 Accept the prompt on the TV to tum off the TV screen 3 Control the audio playback with the TV remote control EN 26 View Scenea What you can do With Scenea you can display a picture as the wallpaper on your TV Display the default picture or load your own picture as the wallpaper The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer Switch on 1 Press ff 2 Select Scenea then press OK The default picture is displayed Note The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer For information about the sleeptimer see Use more of your TV gt Set locks and timers gt Sleeptimer Page 22 Load TV wallpaper You can also load your own picture as the wallpaper Note When you load a new picture it overrides the existing picture 1 Connect the USB storage device to the TV 2 Press ft 3 Select Browse USB then press OK 4 Select a picture then press B OPTIONS 5 Select Se
13. a WPS router select WPS on the TV e _ If you want to set the PIN code in your router software to connect select WPS pin and note down the code e To enter the encryption key manually select Standard and enter the key when prompted Set secured connection with WPS encryption 1 To set the secured connection with a PIN code select the WPS pin and press OK 2 Write down the 8 digit PIN code shown on TV and enter it in the router software on your PC See the router manual for where to enter the PIN code Set secured connection with WPA encryption If your router has WPA WiFi Protected Access security enter the pass phrase with the remote control 1 To enter the encryption key manually select Standard and press OK 2 To access the onscreen keyboard select the text entry field then press OK Set secured connection with WEP encryption If your router has WEP security the TV asks for the WEP encryption key in hexadecimal numbers 1 Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list 2 Enter the security key on the TV with the remote control to connect to the router 3 If prompted agree to the End User Licence Agreement EN 49 English Common interface What you can do You can watch scrambled digital TV channels with a Conditional Access Module CAM After the CAM is inserted and subscription fees a
14. brilliant high definition image Advance sharpness Enable superior sharpness especially on lines and contours in the picture Dynamic contrast Set the level at which the TV automatically enhances details in the dark middle and light areas of the picture Dynamic backlight Reduce power consumption by dimming the TV backlight to match room lighting conditions MPEG artifact reduction Smooth he digital transitions in the picture Colour enhancement Change the colours to be more vivid and improve he resolution of details in bright colours Gamma Non linear setting for picture luminance and contrast PC mode When a PC is connected hrough HDMI change the picture format to Unscaled to display maximum detail Picture format Change the pict format Screen edges Change the picture size Picture shift Move the position of the picture You cannot select this setting if the selected picture format is 4 3 Auto fill Auto zoom or Wide screen Cc re EN 27 English More sound settings You can change the settings in the Sound menu 1 Press ft 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to change then press OK e _ Smart sound Access predefined smart sound settings e Reset Reset to factory default settings e _ Clear sound Enhance the sound quality e _ Bass Change the bass level e Treble
15. installation of channels was performed By default when there are changes to these channel lists the TV updates them automatically You can also switch off the automatic update or manually update the channels Note If you are prompted to enter a code enter 8888 Automatic update To add or remove digital channels automatically leave the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list Switch off the channel update message If a channel update is performed a message is displayed at startup You can switch off this message 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK EN 30 What you can do View satellite channels Note e _ Satellite signal is available on certain models only Search for satellite is only available if the TV supports DVB S e To receive satellite channels connect a satellite receiver to the SAT connector on your TV LNBs This TV can receive signals from 4 different low noise block down converters LNBs An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite Install satellite channels Install satellite channels 1 While you watch TV press ff 2 Select Setup gt Search for satellite gt Reinstall chann
16. is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Reception e _ Antenna input 75 ohm coaxial IEC75 e _ TV system DVB COFDM 2K 8 K ideo playback NTSC PAL SECAM igital TV MPEG 4 DVB T Terrestrial DVB T2 DVB C Cable DVB S S2 Satellite e Tuner bands VHF UHF S Channel yperband U lt Available on certain models only Display and sound Pictu e e e Soun re Display Display type edge LCD LED backlight Diagonal size 48 cm 19 inch 56 cm 22 inch 61 cm 24 inch 81 cm 32 inch 94 cm 37 inch 107 cm 42 inch 119 cm 47 inch Aspect ratio 16 9 widescreen Panel resolution For HD models 1366 X 768 p For FHD models 1920 X 1080 p Digital Crystal Clear Perfect Motion Rate PMR 100 Hz d Output power RMS For 19 6 W For 22 10 W For 24 10 W For 32 to 47 PFL30x7 series 20 W PFL35x7 series 20 W Incredible Surround Clear Sound Mono Stereo NICAM EN 59 English Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 1280 x 720 60 1280 x 768 60 1280 x 1024 60 1360 x 768 60 For Full HD TV only 1680 x 1050 60 Z 1920 x 1080 60 Z
17. latest programme information EN 15 English View media What you can do You can play videos photos and music on your TV from e _ Your computer connected through the home network For models with network connector only e A USB device connected to the TV Play files 1 Press ft 2 Select Browse network then press OK If the network installation starts follow the onscreen instructions 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons on the remote control to control play Play files from computer What you need Available on certain models only e A wired or wireless home network connected with a Universal Plug and Play uPnP router e A Philips wireless USB adapter PTAO1 or a LAN cable that connects your TV to your home network e A media server program running on your computer e Appropriate settings on your computer firewall to allow you to run the media server program Set up the network 1 Connect your TV and the computer to the same home network See Connect your TV gt Network and the Internet Page 47 2 Switch on your computer and the router Note If the apparatus does not return to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Set up media sharing 1 Install a media server program on your computer to share media files Some of the media se
18. package for your TV Software installation instructions and release notes indicating what s been updated are also available at the site Full instructions on how to upgrade your TV software are also available at Set up your TV gt Update software Page 35 Channel issues You want to install TV channels See Set up your TV gt Channel settings Page 29 for instructions on installing analogue or digital channels If you want to install satellite TV channels see Set up your TV gt Channel settings Page 30 No digital channels were found during the installation See the technical specifications to make sure that your TV supports DVB T DVB C or DVB S in your country e Make sure that all cables are properly connected and that the correct network is selected Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected EN 51 English You want to rearrange or reorder the channel list After channels have been installed they appear in the channel list For information about managing channel lists including rearranging channels see Watch TV gt Manage channel lists Page 13 Picture issues The TV is on but there is no picture or the picture is distorted e _ Make sure that the antenna is properly connected to the TV e Make sure that the correct device is selected as the display source e _ Make sure that the external device or sou
19. supported by the TV Audio and picture files on your USB storage device do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback EN 53 English Network issues This section is applicable to certain models only You want to establish a wireless connection between your TV and home network Refer to Connect your TV gt Network and the Internet gt Wi Fi ready Page 48 for instructions on how to connect your TV wirelessly to your home network Smart TV does not work Smart TV isavailable on certain models only Check that the router is properly connected o the TV and that your router has open access to the Internet If your router has a firewall or security settings make sure that it allows Smart TV data to pass through check your router documentation for details Open internet access via Smart TV is slow e Try to improve the signal quality between the router and TV if you are accessing the Internet wirelessly Refer to the router s documentation for details e _ Always use a fast broadband connection wherever possible e Update your TV with the latest software to ensure browsing speed is optimal Browse Network is slow If you are accessing your PC wirelessly refer to the router s documentation to improve the signal quality between the router and Wireless network is distorted or not found
20. the software make sure that you have e A USB storage device that has at least 256 megabytes of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB connector and Internet access Note Do not use a USB hard drive 1 Connect a USB storage device 2 Press ft 3 Select Setup gt Update software then press OK The update assistant starts 4 Follow the onscreen instructions to start the update Note The update assistant directs you to the Philips support website See the installation instructions on the website to complete the update Update from digital broadcast When available the TV can receive software updates through digital broadcasts When a software update is received you are prompted to update the software We strongly recommend that you update the software when prompted Follow the onscreen instructions Note To update the software later select f gt Setup gt Software settings gt Local updates Select the file that you downloaded and follow the onscreen instructions to complete the update Restore default settings You can reset all picture and sound settings and reinstall all TV channels on your TV 1 Press ft 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the onscreen instructions EN 35 English 5 Connect your TV About cables Cable qua
21. then press OK 2 Use the Navigation buttons to make your selection 3 Select Done then press OK Sleeptimer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleeptimer 1 Press ft 2 Select Setup gt TV settings gt Preferences gt Sleep timer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of ten minutes To switch off the sleeptimer set it to zero minutes 4 Press OK to activate the sleep timer After the specified time the TV switches to standby Child lock To protect children from unsuitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Select the channel to lock or unlock then press OK 3 If prompted enter the child lock code with the Numeric buttons 4 Restart the TV to activate the lock Note If you access the channels from the channel list you are prompted to enter your lock code Use EasyLink P
22. to audio from the TV you can switch off he TV display Other functions continue to operate normally e Low standby power The advanced power circuitry reduces the power consumption of the TV to an extremely ow level without losing out on the constant standby functionality e Power management The advanced power management helps save the energy consumed by this TV To view how your personalised TV settings affect the TV s relative power consumption press ft then select Setup gt Watch demos gt Active Control EN 9 English End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused rs When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health EN 10 Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal hel
23. 38 e _ Select from the Source menu Note If you connect an HDMI CEC compliant device to the TV through the DMI connector and switch it on the device will be automatically added to the ome menu 1 Connect and switch on the device 2 Press ff 3 Select Add new device then press OK 4 Follow the onscreen instructions e If you are prompted to select the TV connection select the connector that this device uses From Source menu You can also press SOURCE to display a list of connector names Select the connector that connects the device to the Tv ress J SOURCE ress the Navigation buttons to select a nector in the list ress OK to confirm O Ki v3 uD wA t Rename device After you have added a new device to the Home menu you can rename it 1 Press ft 2 Select the device icon from the Home menu 3 Press B OPTIONS 4 Select Rename then press OK A text input box appears 5 Press the Numeric buttons and the Navigation buttons to select and enter the name 6 When complete select Done then press OK Remove device If the device is no longer connected to the TV you can remove it from the Home menu 1 Press ft 2 Select the device icon from the Home menu 3 Press B OPTIONS 4 Select Remove device then press OK 5 Select Remove then press OK The selected device is removed from the Home menu Network and the Internet
24. CION ADVERTENCIA RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty EN 8 Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing he products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according o scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Ph
25. Change the treble level e _ Surround Switch on spatial sound e Auto volume levelling Automatically reduce sudden volume changes for example when switching channels e Headphone volume Change headphone volume e _ Balance Change the balance of the left and right speakers e Audio out delay Automatically sync the image on the TV to the audio from a connected home theatre e Audio out offset Change the setting for audio output delay You cannot select this setting if Audio out delay is not switched on e Digital output format Select audio output through the digital audio connector Select PCM to convert non PCM audio or Multichannel to output to home theatre e Digital output level Set the sampling rate for PCM audio Normal No loss in intensity or signal strength Low Certain amount of loss in intensity or signal strength EN 28 Select audio format lf a digital TV channel broadcaster streams audio in several formats you can select an audio format 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select a setting then press OK e Preferred audio format Receive standard audio format MPEG or advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo If stereo broadcasting is available select mono or stereo audio 4 Press D to exit Reset picture and sound You can restore the def
26. EG2 extensions are epe H263 1408x1152 30 AAC LC MPEG4 AAC LCIHE AAC 40 Mbps Motion JPEG mov only 1280x720 30 30 Mbps H1264 BP MP HP 1V 40 1920x1080 30 40 Mbps MPEG4 SP L 3 0 ASP HL 4 0 18201080 30 wav PCMIADPCM Aslaw PCMludaw 40 Mbps PCM MPEG Layer1 2 MP3 MPEG2 AAC LC MPEG4 AAC LC HEAAC WMV9 1920x1080 30 40 Mbps AC3 WMAv8 vC 1920x1080 File Extensions Container Video codec Maximum resolution 30 st not exceed 128 characte Max Frame Rate fps 40 Mbps Max Bit Rate Mbps Audio codec XviD 1920x1080 30 40 Mbps MPEG1 768x576 30 1 8 Mbps MPEG2 MP HL 1920x1080 30 40 Mbps wav PCMIADPCM A law PCM udaw H 264 BP MP HP vag 1920x1080 30 PCM MPEG Layer 1 2 MP3 MPEG2 40 Mbps AAC LC MPEG4 AAC LC HE AAC AC3 WMAv8 MPEG4 SP L 3 0 ASP HL 4 0 19201000 30 40 Mbps Motion JPEG 1280x720 30 30 Mbps Sorenson 352x288 30 40 Mops MPEG Layer1 2 MP3 MPEG2 AAC LC H 264 BP MP HP INAS 1920x1080 30 40 Mbps MPEG4 AAC LC HEAAC NA NA NA 32 40 48 56 64 80 96 112 128 160 192 224 MP3 256 320 kbits s 16bit PCM big little 4 PCM ADPCM A aw PCM endian ustaw PCM 24bit PCM big endian Supported DLNA compliant media server software DLNA is available on certain models only Windows Media Player for
27. Register your product and get support at www philips com welcome PFL30x7H PFL30x7T PFL30x7K PFL35x7H PFL35x7T PFL35x7K EN User Manual PHILIPS Contents 1 Get started 3 TV tour 3 TV controls 4 Important information 6 Sustainability 9 Help and support 11 2 Use your TV 12 Watch TV 12 View programme guide 15 View media 16 Browse Smart TV 18 3 Use more of your TV 19 Pause TV 19 Play games 20 View Text 21 Set locks and timers 22 Use EasyLink 23 View Scenea 26 4 Set up your TV 27 Picture and sound 27 Channel settings 29 Satellite settings 30 Language settings 32 Universal access settings 33 Other settings 34 Update software 35 Restore default settings 35 5 Connect your TV 36 About cables 36 Connect devices 38 Connect more devices 45 Watch a connected device 47 Network and the Internet 47 Common interface 50 6 Troubleshooting 51 General issues 51 Channel issues 51 Picture issues 52 Sound issues 53 Connection issues 53 Network issues 54 Contact Philips 54 EN Product specifications 55 Power and reception 55 Display and sound 55 Display resolutions 56 Multimedia 56 Connectivity 57 Supported TV mounts 58 Help version 59 Index 60 1 Get started TV tour Media playback If you connect your TV to a USB storage device you can enjoy your movies music and pictures on a wide screen TV with excellent sound High Definition TV
28. a 2011 Central Wales zat 2009 10 London 2012 Meridian 2012 West Country amp PHILIPS QY 2012 Koninklijke Philips Electronics NV Al served Document order number 123007122022
29. access hearing impaired 33 universal access visually impaired 33 V VGA 37 visually impaired 33 volume 12 W wall mount 58 wallpaper 26 wireless dongle 48 Y YouTube 18 YPbPr component video 36 Information about how to re tune your TV during the TV switchover Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones get set for digital V Digital UK the body leading the digital TV switchover will advi
30. annel list 10 G INFO Display information about current activity 11 Ht ADJUST Adjust TV settings 12 B OPTIONS Access currently available options 13 Back Return to the previous menu page or exit from a TV function 14 CH CH Switch channels 15 Volume Adjust volume 16 16 Mute Mute or restore audio 17 Colour buttons Select tasks or options The buttons function according to the services offered by the service provider 18 SUBTITLE Switch subtitles on or off 19 0 9 Numeric buttons Select TV channels or enter text 20 TEXT Enable or disable text EasyLink controls Note EasyLink controls are available when the connected device is HDMI CEC compliant With EasyLink controls you can control your TV and other HDMI CEC devices with one remote control Access EasyLink controls 1 While you view content from a connected HDMI CEC device press B OPTIONS 2 Select Show remote control then press OK 3 Select the EasyLink control button then press OK Read more about EasyLink in Use more of your TV gt Use EasyLink Page 23 EN 5 English Important information Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow the instructions the warranty does not apply Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vase
31. arental rating You can set your TV to display only programmes with age ratings lower than your child s age This restriction only applies to digital channels from broadcasters thal rate their programmes according to age 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Child lock gt Parental rating You are prompted to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks and timers gt Child lock Page 23 What you can do You can get the most out of your DMI CEC compliant devices with Philips asyLink enhanced control features Connect our HDMI CEC compliant devices through DMI to your TV and control them at the same time with your TV remote control Note Other brands describe HDMI CEC functionality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink gt After you have switched on Philips EasyLin he following features are available K One touch play When you play an HDMI CEC complian device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC
32. as shown in the graphic For PFL3507 37 to 42 inch TVs Before you mount the TV on the wall find the correct length of the screw To find the length of screw add the thickness of your wall mount to the screw length as shown in the graphic Help version UMv 123007122022 20111208 EN 59 English 8 Index A age rating 23 amplifier select output 25 analogue channels fine tune 30 analogue channels subtitles 32 audio language 32 audio sync 25 ie CAM enable 50 CAM insert 50 CAM see Conditional Access Module 50 channel list 13 channels 13 channels favourites 13 channels fine tune analogue 30 channels install automatic 29 channels install digital 29 channels install manual 29 channels install satellite 31 channels reinstall 35 channels rename 13 channels reorder 13 channels switch 13 channels update 30 child lock 23 clock 22 common interface 50 computer play files 16 Conditional Access Module 50 connect devices 36 connect digital camcorder 44 EN 60 connect digital camera 44 connect disc player 38 connect external hard disk 45 connect game console 42 connect home network 48 connect home theatre system 43 connect PC 46 connect recorder 40 connect TV receiver 39 connect USB 16 connected device add 47 connected device rem
33. ault picture and sound settings while the channel installation settings remain the same 1 While you watch TV press 2 Select Setup gt TV settings gt Factory settings then press OK All TV settings except for channel settings are reset to the default factory settings Channel settings Automatic install When the TV was switched on for the first time a full installation of channels was performed To change your language country and reinstall all available TV channels you can run this full installation again Start installation 1 Press ft 2 Select Setup gt Search for channels gt Reinstall channels then press OK The Country menu is displayed 3 Select your country then press OK 4 Select your network then press OK e Antenna Access free to air antenna or digital DVB T channels e _ Cable Access cable or digital DVB C channels 5 Follow the onscreen instructions to select other options if any The start menu for channel search is displayed 6 Start channel search e If your channel service provider instructs you to change settings select Settings then press OK Follow the service provider s instructions to complete the installation e Otherwise select Start then press OK 7 Once the channel search is complete select Finish then press OK Tip Press LIST to see the channel list Note When digital TV channels are found the list of insta
34. compliant devices switch to standby mode EasyLink remote control You can control multiple HDMI CEC compliant devices with your TV remote control System audio control If you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers Synchronise audio If you connect your TV to a home theatre you can synchronise the audio and video to avoid lag between the picture and sound Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link to retain picture quality EN 23 English Maximise display for subtitled video Some video subtitles can create a separate subtitle bar under the video which limits the video display area To maximise the video display area you can switch on auto subtitle shift and display the subtitles on top of the video image Listen to another device when TV is in standby You can listen to a connected HDMI CEC compliant device through the TV speakers even when the TV is in standby What you need e _ Connect at least two HDMI CEC compliant devices through HDMI See Connect your TV gt Connect devices Page 38 e _ Configure each HDMI CEC compliant device properly e _ Switch on EasyLink Switch on EasyLink 1 Press ft 2 Select Setup gt TV sett
35. cture settings 27 picture settings reset 28 Pixel Plus link 25 placement stand or wall mount 34 position 34 power 55 product support 11 R rear controls 4 recorder connect 40 recycle 10 reinstall 35 remote control 4 remove connected device 47 rename channels 13 rename connected device 47 EN 61 English S safety 6 satellite add or remove 31 satellite install channels 31 satellite settings 30 SCART 36 Scenea enable 26 Scenea load wallpaper 26 screen care 7 screen saver 26 sensors 4 settings assistant 27 settings audio format 28 settings game 20 settings picture 27 settings sound 28 shop mode 34 sleeptimer 22 smart settings 14 TV 3 Smart TV applications 18 Smart Smart TV browse 18 Smart TV network 47 software check version 35 software digital update 35 software USB 35 sound settings reset 28 standby 12 subtitles analog 32 subtitles digital 32 subtitles language 32 sustainability 9 switch TV on off 12 EN 62 T ext 2 5 22 ext digital text 21 ext dual screen 21 ext enlarge 21 ext language 21 ext subpages 21 ext Table Of Pages 21 rademarks and copyrights 9 TV receiver connect 39 TV speakers mute 12 U universal access enable 33 universal
36. e Smart TV displays one page at a time in full screen e Certain websites may not display completely Functions that require plug ins may be unavailable oninklijke Philips Electronics N V bears no responsibility regarding the content and the quality of the content provided by the content service providers What you need 1 On your home network connect the TV to the Internet 2 On your home network connect a router with a high speed connection to the Internet 3 Switch on the router 4 Install the network See Connect your TV gt Network and the Internet Page 47 8 De EN 18 3 Use more of your TV Pause TV What you can do While you watch a digital channel you can pause a programme to answer a phone call or to have a break The broadcast is stored on a USB hard drive that is connected to the TV You can resume playback of the programme at any time Note e You can pause a programme for a maximum of 90 minutes What you need e Tune your TV to receive digital channels See Set up your TV gt Channel settings gt Automatic install Page 29 e _ Connect a USB 2 0 compatible hard drive with a minimum capacity of 32 GB and a minimum transfer speed of 30 MB per second Install USB hard drive To pause TV you must connect a USB hard drive to the TV and format it Caution e Philips is not responsible if the USB hard drive is not supported nor is it responsible fo
37. e TV with an HDMI cable Connect the game console to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR JOJO Ye EN 42 Home theatre Connect the home theatre to the TV with an HDMI cable and an optical cable DIGITAL AUDIO OUT L Connect the home theatre to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR O01010 Te EN 43 English Connect the home theatre to the TV with a composite cable CVBS and an audio L R cable AUDIO L R XO Digital camera Connect the digital camera to the TV with a USB cable For certain camera models only Digital camcorder Connect the digital camcorder to the TV with an HDMI cable EN 44 Connect the digital camcorder to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR 01010 19 Connect the digital camcorder to the TV with a composite cable CVBS and an audio L R cable CVBS AUDIO UR XO Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable EN 45 English Computer Connect the computer to the TV with an HDMI cable AUDIO IN DVI VGA EN 46 Watch a connected device Add new device Before you can watch a connected device e _ Add its icon to the Home menu for easy access See Connect your TV gt Connect device Page
38. ears on the TV display The TV is in Shop mode To remove the e sticker set the TV to Home mode then restart the TV See Set up your TV gt Other settings gt Location Page 34 The computer display on the TV is not stable e Make sure that your PC uses the supported resolution and refresh rate See Product specifications gt Display resolutions Page 56 e _ Change the TV picture format to Unscaled Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction ake sure that all cables are properly connected ake sure that the volume is not muted or set to zero ake sure that the TV speaker setting is selected Press Ht ADJUST select Speakers and then select TV ake sure that the TV audio output is connected to the audio input on the DMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers e Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still cannot hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions There is a picture but the sound quality is poor Make sure that the sound settings are correctly set
39. ecommended for HD or PG e Wide screen Stretch 4 3 format to 16 9 e Unscaled Provide maximum detail for PC Only available when PC mode is selected in the Picture menu View programme guide You can view information about digital TV channels using programme guides provided by broadcasters This information can include e _ Channel schedules for the day Now and next or up to 8 days if supported by your broadcaster e Synopsis of programmes Note Programme guides are available in certain countries only Set programme guide Before you use the programme guide check the following settings 1 Press ff 2 Select Programme guide Access the TV programme guide 1 Press ff 2 Select Programme guide then press OK Note If you are viewing the programme guide for the first time follow the onscreen instructions to update the guide Use TV programme guide options You can customise the displayed information to e Remind you when programmes start e Display only preferred channels 1 In the programme guide press B OPTIONS 2 Select an option then press OK e _ Set reminder Set programme reminders e _ Clear reminders Clear programme reminders e Change day Select the day to display e _ Show info Display programme information e _ Search by genre Search TV programmes by genre e _ Scheduled reminders List programme reminders e Acquire EPG data Update the
40. els 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish then press OK Select connection type While you install satellite channels you need to set the connection type The number of LNBs on your dish antenna determines the number of satellite channels you can install 1 After you select Reinstall channels select Settings and then press OK 2 Select Connection type 3 Select a setting then press OK e OneLNB Select if you have only one LNB e DiSeqC Mini 2 LNBs Select if you have 2 LNBs e DiSeqC 1 0 3 4 LNBs Select for 3 or 4 LNBs Test signal strength If a channel or transponder is skipped during installation you can test the signal strength of a satellite or add a new channel 1 While you watch TV press ft 2 Select Setup gt Search for satellite gt Satellite reception test then press OK 3 Select the LNB 4 If you know the frequency of the transponder which can include several channels select Frequency and enter it 5 Select Search then press OK 6 If a new frequency is found press Store to add the new transponder with its channels Update satellite channels 1 While you watch TV press ff 2 Select Setup gt Search for satellite gt Update channels 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish then press OK Add and remove satellites
41. en contrast and brightness to avoid screen damage Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV To secure the TV purchase a Kensington anti theft lock sold separately 6 H English Notice 2012 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Care for service or repairs A A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION NE PAS OUVRIR PRECAU
42. gh the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was selected the TV prompts the connected device to switch to system audio mode Synchronise audio If your TV is connected to a home theatre and there is a lag between the picture and the sound you can synchronise them e _ If you are using a Philips home theatre the audio and video are automatically synchronised e For other home theatre brands you need to switch on the audio sync delay on the TV to synchronise the audio and video Switch on Audio Out Delay 1 Press ff 2 Select Setup gt TV settings gt Sound 3 Select Audio out delay gt On then press OK Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link Switch on Pixel Plus Link 1 Press ft 2 Select Setup gt TV settings gt EasyLink 3 Select Pixel Plus Link gt On then press OK Maximise video display Some subtitles create a separate subtitle bar under the video that limits the video display area To maximise the video display area you can switch on auto subtitle shift The subtitles are then displayed over the video image Switch on auto subtitle shift 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3
43. he slideshow e Repeat Play once View slideshow once or repeatedly e _ Shuffle off Shuffle on Enable or disable random display of pictures in the slideshow e Rotate image Rotate the picture e _ Show info Display the picture information e Setas Scenea Load the selected picture as the TV wallpaper See Use more of your TV gt View Scenea Page 26 EN 17 English Browse Smart TV Access Smart TV Applications Apps If your TV is connected to the Internet through your home network you can watch What you can do Available on certain models only YouTube videos and view media files from With Internet Applications Apps which are your home network specially adapted Internet websites for your YouTube Leanback TV you can enjoy the following features 1 Press e Watch videos online 2 Select YouTube then press OK e Catch up with TV programmes that 3 Follow the onscreen instructions to watch you missed videos Note 4 Press ft to exit e Smart TV services and apps vary from Browse network td 19 country 1 Press e Availability of catch up TV apps and 2 Select Browse network then press OK heir TV programmes is subject to your ake 3 Select the network to connect V s country setting To find out which i a TV programmes are available access Press the Navigation buttons to select a he TV programme guide within the file then press OK app 5 Press to exit
44. ht of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage f you need to store the TV disassemble the stand from the TV ever lay the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different Parts of this product may be made of glass Handle with care to avoid injury and damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times
45. ilips to anticipate further developments in standardisation for early integration in its products Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries O1 DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Home HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries K Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world S dina DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living etwork Alliance DLNA is applicable for PFL35x7 only All other registered and unregistered rademarks are the property of their respective owners Sustainability Energy efficiency This TV is designed with energy efficient features To access these features press the green button on the remote control e Energy saving picture settings You can apply a combination of energy saving picture settings While you watch TV press the Green button then select Energy saving e _ Screen off If you only want to listen
46. ings gt EasyLink gt EasyLink 3 Select On or Off then press OK EN 24 Control devices simultaneously If you connect multiple HDMI CEC devices that support this setting you can control all such devices through the TV remote control Note This is an advanced setting Devices that do not support this setting will not respond to the TV remote control 1 Press ff 2 Select Setup gt TV settings gt EasyLink 3 Select EasyLink remote control gt On or Off 4 Press OK to activate Tips e _ To switch back to TV control press then select Watch TV e To control another device press then select the device from the Home menu e To exit press D EasyLink buttons You can control HDMI CEC compliant devices with the following buttons on the TV remote control e Switch the TV and the connected device on or to standby e Play buttons Control video or music play e Numeric buttons Select a title chapter or track e OK Start pause or resume play on the connected device activate a selection or access the device menu e 44 PP Search backwards and forwards on the connected device e ft Display the TV Home menu You can also control devices through other EasyLink buttons that are available through the On Screen Remote Control OSRC To access the OSRC 1 While you view content from a connected device press B OPTIONS 2 Select Show remote control
47. ion 3 Select Digital Reception test gt Find channel then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the channel is found select Store then press OK 7 Press 9 to exit Note If your cable provider does not provide you with a specific symbol rate value for DVB C channels select Automatic in Symbol rate mode EN 29 English Fine tune analogue channels If the reception of an analogue TV channel is poor you can fine tune the TV channel 1 Press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual antenna installation gt Fine tune and then press OK 4 Press A or W to fine tune the channel 5 When you have selected the correct channel frequency select Done and then press OK 6 Select an option then press OK e Store current channel Store the channel as the current channel number e _ Store as new channel Store the channel as a new channel number To switch off automatic updates In the Channel installation menu select Automatic channel update gt Off Update channels manually 1 Press ft 2 Select Setup gt Search for channels gt Update channels then press OK 3 Follow the onscreen instructions to update the channels Satellite settings Update channel list When the TV was switched on for the first time a full
48. les settings e Audio language Select the available audio language e Repeat Repeat a video track or album e _ Show info Display the file name e Eco settings Select energy saving modes Listen to music Press the Navigation buttons to select a music track then press OK e Press II to pause e _ Press Ml to stop e Press lt lt PP to search backward or forward within a music track e _ Press D to exit content browser Music playback options Press B OPTIONS to access or exit the following music options e Subtitles Select the available subtitles settings e Audio language Select the available audio language e Repeat Repeat a track or an album e Play once Play the track once e _ Shuffle on Shuffle off Enable or disable random play of tracks e _ Show info Display the file name e Eco settings Select energy saving modes View pictures Press the Navigation buttons to select a picture then press P to start the slideshow e Press II to pause e Press W to stop e Press Navigation buttons to search for a picture e _ Press to exit content browser Picture slideshow options Press B OPTIONS to access or exit the following picture options e Start Slideshow Stop Slideshow Start or stop slideshow e Slideshow transitions Select the transition from one picture to the next e _ Slideshow frequency Select the display time for each picture in t
49. lity Overview Before you connect devices to the TV check the available connectors on the device Connect the device to the TV with the highest quality connection available Good quality connectors transfer picture and sound better The connections shown in this user manual are recommendations only Other solutions are possible Tip If your device only has composite or RCA connectors use a SCART cinch adapter to connect the device to a SCART connector on the TV HDMI An HDMI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Connect HDMI for high definition HD TV signals and to switch on EasyLink e An HDMI Audio Return Channel ARC connector allows output of TV audio to an HDMI ARC compliant device e Connect HDMI cables shorter than 5 meters 16 4 feet Kkekkk SK HDMI EN 36 Y Pb Pr Component video Y Pb Pr only transmits video For sound also connect to Audio Left Right e he Y Pb Pr connection can handle high definition HD TV signals e _ Match the Y Pb Pr connector colours to the cable plugs YPbPr AUDIO L R wk kk E o SCART A SCART connection combines video and audio signals SCART connectors can handle RGB video signals but cannot handle high definition HD TV signals SCART kkk J CVBS CVBS only transmits video For sound also connect to Audio Left Right e CVBS c
50. lled channels may display empty channel numbers You can rename reorder or uninstall these channels Install analogue channels You can search and store analogue TV channels one by one Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual antenna installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual antenna installation menu select Find channel then press OK 2 Find the channel e _ If you know the channel frequency enter it with the Navigation buttons or Numeric buttons e _ If you do not know the channel frequency search for the next frequency that has a strong signal Select Search and then press OK 3 After you have found the correct channel select Done then press OK 4 Select Store as new channel then press OK to store the new TV channel Note If the reception is poor reposition your antenna and repeat the procedure Install digital channels If you know the channel frequency of the channels you want to install you can search and store digital channels one by one For best results contact the service provider 1 Press ft 2 Select Setup gt Channel settings gt Channel installat
51. me menu for easy access then select it from the Home menu e _ Select from the Source menu Note If you connect an HDMI CEC compliant device to the TV it is automatically added to the Home menu Add new device 1 Connect and switch on the device 2 Press ft 3 Select Add new device then press OK 4 Follow the onscreen instructions e _ If you are prompted to select the TV connection select the connector that this device uses View from Home menu After you have added the new device to the Home menu you can select its icon to start using it 1 Press ft 2 Select the device icon from the Home menu 3 Press OK to confirm View from Source menu You can also press SOURCE to display a list of connector names Select the connector that connects the device to the TV 1 Press SOURCE 2 Press the Navigation buttons to select a connector in the list 3 Press OK to confirm EN 14 Use smart settings Your TV comes with smart picture and sound settings You can apply these settings or customise them Select your preferred picture setting 1 While you watch TV press Hit ADJUST 2 Select Smart picture 3 Select an option then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing Natural Natural picture settings Cinema Ideal settings for movies e Game Ideal settings for game
52. nection 1 Switch on the router and switch on its DHCP setting 2 Connect the router with an Etherne cable to the TV 3 Press ff then select Setup 4 Select Connect to network then press OK 5 Follow the onscreen instructions to install the network 6 Wait for the TV to find the network connection 7 If you are prompted agree to the End User Licence Agreement Connect amp You can connect this TV to your home network through a wired or wireless connection e For a wired connection see Connect your TV gt Network and the Internet gt Wired connection Page 48 8 N CERTIFIED e For a Wi Fi ready connection see Connect your TV gt Network and the Internet gt Wi Fi ready Page 48 i is EN 48 Wi Fi ready This section is only for Wi Fi ready TVs With the Philips wireless USB adapter PTA01 sold separately you can connect the TV to your home network wirelessly You can enjoy the best of the Internet from Smart TV services and share content between your connected devices using DLNA Note The wireless network operates in the same 2AGHz frequency spectrum as common household devices such as Dect phones microwave ovens or Bluetooth devices which can cause Wi Fi interference Move these devices away from the TV e To reduce network traffic switch off unused network equipment in the home network e Reception quality depends on the location of the wirele
53. nguage For digital channels that are broadcast with multiple audio languages you can set your preferred audio languages The TV automatically switches to one of these languages if they are available 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select Primary audio language or Secondary audio language to set the preferred audio languages then press OK 4 Select the language then press OK Select audio language If the TV channel broadcasts multiple or dual audio languages you can select the preferred audio language 1 While you watch TV press B OPTIONS 2 Select Audio language for digital channels or Dual I Il for analogue channels then press OK 3 Select from the available languages then press OK EN 32 Subtitles on digital channels 1 While you watch a digital TV channel press B OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or On during mute then press OK If you select On during mute subtitles are displayed only when you press amp to mute the sound Note If an MHEG application is activated subtitles are not displayed Subtitle language For certain digital channels you can change the subtitle language 1 While you watch TV press ft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select Primary subtitle language or Seconda
54. normal behaviour When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance When the TV is in standby a startup splash screen is displayed then returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or press any key on the TV The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before you reconnect the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the 4 digit code to unlock the channel blocking feature child lock Enter 8888 The TV or Smart TV menu is in the wrong language Change the menu to your preferred language For more information see Set up your TV gt Language settings gt Menu language Page 32 Available on certain models only Subtitles are not visible when you play a movie file from a USB storage device Subtitle files that are not hard coded into a video file for example srt sub idx are not supported You want to upgrade your TV software Visit www philips com support and download the latest software
55. on to your calls and contact your friends and relatives on he big screen You can make video calls on your TV with a Philips HD edia box and a Philips TV video camera both sold separately Enjoy HD video and excellent sound quality from the comfort of your sofa and start calling now Available on certain models only Intuitive menus With the TV s intuitive menus you can easily access the channel or media file that you want or tweak the TV settings to suit your needs EN 3 English TV controls Rear controls 1 Standby Switch the TV on or off 2 CH Channel Switch to the next or previous channel 3 Source Access a connected device 4 lt Volume Increase or decrease volume EN 4 Sensors 1 1 Remote control sensor Point the remote control at the sensor Make sure that the line of sight between the remote control and the TV is not blocked by furniture or other objects Remote control 1 Standby Switch the TV on or to standby 2 Play buttons Control playback of media files 3 SOURCE Access a connected device 4 ED FORMAT Change picture format 5 I TV Switch source to watch TV 6 6 ft Home Access the Home menu 7 OK Confirm an entry or selection 8 AV4P Navigation buttons Navigate through menus and select items 11 e 4 12 Ee OPTIONS 9 LIST Access the TV ch
56. onnections provide standard picture quality e On certain models the video input socket on your TV is labelled as VIDEO AV IN or COMPOSITE CVBS AUDIO UR E eR CVBS VGA You can connect VGA to display PC content on the TV VGA only transmits video For sound also connect to AUDIO IN AUDIO IN DVI VGA EN 3 English Connect devices Blu ray or DVD disc player Connect the disc player to the TV with an HDMI cable Connect the disc player to the TV with a component video cable Y Pb Pr and an audio L R cable EN 38 TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable SAT is available on certain models only ANTENNA Connect the satellite or digital TV receiver to the TV with a SCART cable EN 39 English Connect the satellite or digital TV receiver to the TV with a component video cable Y Pb Pr and an audio L R cable Connect the satellite or digital TV receiver to the TV with a composite cable CVBS and an audio LIR cable Video recorder Connect the recorder to the TV with an antenna cable SAT is available on certain models only ANTENNA EN 40 Connect the recorder to the TV with a SCART cable Connect the recorder to the TV with a component video cable Y Pb Pr and an audio L R cable YPbPr AUDIO UR OTOLO CIO ADR EN 41 English Game console Connect the game console to th
57. ove 47 connected device rename 47 connectors 36 contact information on Internet 11 contact Philips 11 D demo 34 devices 38 devices add 47 devices watch 47 digital camcorder 44 digital camera 44 digital channels 29 digital channels subtitles 32 digital radio 13 a isc player connect 38 display 55 display resolution 56 DLNA 16 E EasyLink 23 EasyLink controls 24 EasyLink enable 24 EasyLink features 23 EasyLink onscreen control 5 EasyLink remote control buttons 24 EasyLink TV speakers 25 end of use 10 energy efficient settings 9 Energy label 10 EPG Electronic Programme Guide 3 external hard disk 45 F favourite channels list 13 G game console 42 games 20 H DMI 36 DMI ARC 36 hearing impaired 33 help onscreen 11 Help version 59 high definition HD content 3 home mode 34 home network 47 home theatre system connect 43 install channels automatic 29 K kensington lock 7 L language menu 32 language subtitles 32 location home or shop 34 M media server program 16 mode home or shop 34 multimedia play files 16 multimedia supported formats 56 N network connect 47 P parental rating 23 pause TV 19 PC connect 46 PC display resolutions 56 picture format 15 pi
58. panying this product or online at www philips com support Before you contact Philips write down the model and serial number of your TV You can find this information on the back of your TV or on the TV packaging EN 11 English 2 Use your TV Watch TV Switch TV on or off am o Am Switch the TV on e _ Press the power switch on the TV e If the TV is in standby press on the remote control Note There is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press CH on the TV Switch TV to standby Press on the remote control The remote control sensor on the TV switches to red Switch off the TV Press on the TV The TV switches off Note Though your TV consumes very little energy when it is in standby or switched off it does use some energy If you are not going to use the TV for an extended period of time disconnect the TV from the mains plug EN 12 Automatic switch off You can save energy with this TV s energy efficiency settings The settings are enabled by default so that if there is no user interaction such as pressing a remote control button or a control on the front panel for four hours the TV will automatically switch to standby To disable automatic switch off 1 While you watch TV press the Green button on the remote control 2 Select Auto switch off then press OK
59. ps to prevent negative consequences for the environment and human health EU energy label The European Energy Label informs you on the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the product on the Philips website for your country at www philips com TV Help and support Use Help lo access the onscreen Help menu press the Yellow button To switch between the Help menu and the TV menu press the Yellow button Visit the Philips website If you can t find what you need in the onscreen Help visit the Philips support website at www philips com support On the Philips support website you can also e _ Find answers to Frequently Asked Questions FAQ e Download a printable PDF version of his user manual e Email us a specific question e _ Chat online with Philips Consumer Care available in certain countries only Search the TV forum Your question may have already been answered by the Philips TV community of users Visit www supportforum philips com Contact Philips You can contact Philips Consumer Care in your country for support The number is available in the leaflet accom
60. r without entering page numbers e _ Enlarge Normal view Zoom in on he page Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e _ Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to correctly display different character sets 3 Press B OPTIONS to exit Subpages If the text page contains several subpages you can view each subpage in succession These subpages are shown on a bar next to the main page number If subpages are available press 4 or gt to select them Digital text If a digital TV channel s broadcaster offers dedicated digital text or interactive services you can view digital text Such channels such as BBC1 may have digital text with more interactive features Note Digital text services are blocked when subtitles are broadcast and switched on See Set up your TV gt Language settings gt Subtitles Page 32 When in digital text e Press the Navigation buttons to select or highlight items e Press the Colour buttons to select an option then press OK to confirm or activate EN 21 English Text 2 5 With Text 2 5 you can view text with more colours and better graphics than normal text If Text 2 5 is broadcast by a channel it is switched on by default To switch Text 2 5 on o
61. r damage or loss of data in the device e Formatting removes all data from the connected USB hard drive e The USB hard drive is formatted exclusively for this TV Keep it permanently connected to the TV You cannot access the USB hard drive contents from another TV or PC e Do not overload the USB port If you connect a USB hard drive device that consumes more than 500mA power make sure that it is connected to its own external power supply 1 Make sure that the TV and the USB hard drive are switched off 2 Make sure that there are no other USB devices connected to the TV 3 Connect the USB hard drive directly to the TV or if you intend to connect other USB devices in future connect the USB hard drive through a USB hub Note While you are formatting the USB hard drive do not connect other USB devices to the TV 4 Switch on the TV and the USB hard drive if tt has an external power source 5 Switch to a digital TV channel 6 Press Ill to start formatting 7 Follow the onscreen instructions to complete the formatting process Warning The formatting process may take some time Do not switch off the TV or disconnect the USB hard drive until this process is complete EN 19 English Pause a live TV broadcast 07 55 06 ozs er rt A a 1 On a digital channel press Il to pause a TV programme 2 Press PB to continue watching The status bar shows the following time
62. r off 1 Press 2 Select Setup gt TV settings gt Preferences 3 Select Text 2 5 gt On or Off then press OK Set locks and timers Clock You can display a clock on the TV The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press B OPTIONS 2 Select Clock then press OK The clock is displayed at the top right hand comer of the TV screen Change the clock mode You can change the clock mode to automatic or manual By default it is set to automatic mode which automatically synchronises it to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions change the clock mode to Manual 1 While you watch TV press ft 2 Select Setup gt TV settings gt Preferences 3 Select Clock gt Auto clock 4 Select Automatic or Manual then press OK EN 22 Enable or disable daylight saving time You can enable or disable daylight saving time depending on your region Before you enable or disable daylight saving time set the clock mode to Auto clock gt Manual 1 In the Clock menu select Daylight saving 2 Select Daylight saving time or Standard time then press OK Daylight saving time is enabled or disabled Set the clock manually You can set the date and time manually Before you start set the clock mode to Manual 1 In the Clock menu select Date or Time
63. rce is properly connected There is sound but no picture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection ake sure that the antenna is properly connected to the TV e Loud speakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices ake sure that the devices are connected properly ake sure that the picture settings are set correctly EN 52 The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Change the picture format The picture format keeps changing with different channels Instead of the picture format Auto zoom select a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information app
64. re paid you can watch the programme This TV supports Cl as well as CI Cl supports premium HD digital programmes with a high level of copy protection Note The applications functions content and onscreen messages depend on the CAM service provider What you need Caution To protect the CAM from damage insert the CAM as instructed Note Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module ts 1 Switch off the TV 2 Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV Push the CAM in as far as it will go 3 Switch on the TV then wait for the CAM to be activated This takes a few minutes To maintain access to encrypted digital TV channels leave the CAM in the slot EN 50 Watch CAM services 1 After you insert and activate the CAM press B OPTIONS 2 Select Common interface then press OK 3 Select the CAM provider then press OK 6 Troubleshooting General issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e _ Make sure that the power cable is securely connected The TV does not respond to remote control or front controls when switched on The TV requires some time to start up During this time the TV does not respond to the remote control or front controls This is
65. rver programs available are as follows e For PC Windows Media Player 11 or higher or TVersity e For Mac Twonky 2 Switch on media sharing on your computer using the media server For more information on how to set up the media server refer to the media server s website EN 16 Play files from USB If you have photos videos or music files on a USB storage device you can play the files on TV Caution e Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data in the device e Do not overload the USB port If you connect a USB storage device that consumes more than 500mA power make sure that it is connected to its own external power supply View USB contents 1 Connect the USB device to the USB connector on the TV 2 Press ff select Browse USB then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons on the remote control to control play See Use your TV gt View Media gt Play options Page 17 Play options Watch video Press the Navigation buttons to select a video file then press OK e Press II to pause e _ Press W to stop e Press 4 PP to search backward or forward e Press to exit the content browser Video playback options While you play video press amp OPTIONS to access the following video options e _ Subtitles Select the available subtit
66. ry subtitle language for the preferred language 4 Press OK to confirm Tip Press B OPTIONS gt Subtitle language to change the subtitle language for a specific channel Universal access settings Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired You can switch these features on or off 1 Press 2 Select Setup gt TV settings gt Preferences 3 Select Universal access gt On or Off then press OK Hearing impaired access Tip To make sure that a hearing impaired audio language is available press OPTIONS then select Audio language Languages with an ear icon support hearing impaired audio To switch on hearing impaired audio and subtitles 1 While you watch TV press B OPTIONS 2 Select Universal access gt Hearing impaired 3 Press a button to select an option e Red Switch off hearing impaired features e Green Switch on hearing impaired audio and subtitles 4 Press to exit Visually impaired access Tip To make sure that a visually impaired audio language is available press amp OPTIONS then select Audio language Languages with an eye icon support visually impaired audio To switch on visually impaired audio 1 While you watch TV press B OPTIONS 2 Select Universal access 3 Press the Green button to select Visually impaired 4 Press a button to
67. s e Energy saving Settings that conserve the most energy Standard Default settings that suit most environments and types of video Photo Ideal settings for photos e Custom Customise and store your own picture settings Select your preferred sound setting 1 While you watch TV press tit ADJUST 2 Select Smart sound 3 Select an option then press OK e Personal Apply your personalised sound setting e _ Standard Settings that suit most environments and types of audio e NEWS Ideal settings for spoken audio such as the news e _ Cinema Ideal settings for movies e Game Ideal settings for games e DRAMA Ideal settings for drama programmes e _ SPORTS Ideal settings for sports Change picture format You can change the picture format to suit the video source 1 Press EB FORMAT 2 Select a picture format then press OK to confirm The available picture formats depend on the video source e Auto fill Adjust the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e _ Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e 4 3 Display the classic 4 3 format e Movie expand 16 9 Scale 4 3 format to 16 9 Not r
68. s The name appears when the channels are selected 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to rename then press B OPTIONS 3 Select Rename then press OK 4 Press the Navigation buttons to select each character then press OK e _ Press OK in the entry screen to enable the Onscreen Keyboard or e Press ABC or abc to select an uppercase or lowercase letter 5 Once complete select Done then press OK to confirm when prompted 6 Press to exit Reorder channels After the channels have been installed you can reorder the channel list While you watch TV press LIST The channel list is displayed 2 Press B OPTIONS 3 Select Reorder then press OK 4 Select the channel to reorder then press OK 5 Press the Navigation buttons to move the highlighted channel to another location then press OK 6 Press B OPTIONS 7 Select Done reordering then press OK EN 13 English Listen to digital radio If digital radio channels are available you can listen to them They are installed automatically when you install the TV channels 1 While you watch TV press LIST The channel list is displayed 2 Press amp OPTIONS 3 Select Select list gt Radio then press OK 4 Select a radio channel then press OK Select a source You can watch a connected device in one of the following ways e _ Add its icon to the Ho
69. s near the TV If liquids are spilt on or into the TV disconnect the TV from he power outlet immediately Contact Philips Consumer Care to have the TV checked before use e ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times ever insert objects into the ventilation slots or other openings on the TV ever expose the remote control or batteries to rain water or excessive heat e _ Avoid force coming onto power plugs Ensure that the power plug is fully inserted into the power socket Loose power plugs can cause arcing or fire e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing EN 6 To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of damage to the TV Two people are required to lift and carry a TV that weighs more than 25kg or 55lbs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weig
70. se you when you need to re tune during the switchover If you do not re tune your channels when advised to do so by Digital UK you may lose some or all of your channels until you do re tune You should re tune your TV every few months to check for any new channels If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by switchover and you won t need to re tune If you have any questions please contact your equipment supplier or call Digital UK on 0845 6 50 50 50 or visit www digitaluk co uk How to re tune 1 Press f on the remote control 2 Select Setup and press OK 3 Select Search for channels and press OK 4 Select Reinstall channels and press OK 5 Select your country UK and press OK 6 Select Antenna DVB T and press OK 7 Select Start and press OK The installation can take several minutes When the installation is complete press OK Your TV is now retuned If you are missing any channels it may be that they are not available in your area or that your aerial needs upgrading When does switchover happen Copeland switches on October 17 2007 Visit us at digitaluk co uk Call us on 0845 6 50 50 50t Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines Shetland Islands STV North Y STV central 2010 11 2008 09 Yorkshire 2011 Angli
71. select an option e Red button Off Switch off visually impaired audio e Green button On Switch on visually impaired audio 5 Press 5 to exit Note If the EasyLink remote control is switched on you cannot select the Green button To switch off EasyLink see Use more of your TV gt Use EasyLink gt What you need Page 24 Change volume for visually impaired audio 1 In the Universal access menu press the Yellow button to select Mixed volume 2 Press the Navigation buttons to change the volume then press OK 3 Press to exit Audio feedback for the visually impaired When you press a button on the remote control or TV you can set the TV to play a beep 1 In the Universal access menu press the Blue button to select Key beep 2 Press the Green button to turn on audio feedback or press the Red button to tum it off 3 Press to exit EN 33 English Other settings TV demo You can start a demo to find out more about the features on this TV Note Demos are not supported on MHEG channels 1 While you watch TV press ft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press f to exit Location To make sure that the correct TV settings are applied you can select where the TV is used Shop or home mode Select Home mode to access all TV settings In Shop mode you can access only limited settings 1 While you
72. ss router and the local Internet service provider e When playing video over your wireless home network we recommend that you use an IEEE 802 11 N router The connection speed may differ according to the operating environment of your wireless home network Start wireless setup 1 Switch on your wireless network router 2 Connect the Philips USB adapter PTAO1 to a USB connector on the TV The wireless installation starts automatically 3 Follow the onscreen instructions Tip Keep the wireless USB adapter connected to the TV WPS Wi Fi Protected Setup 1 If your router supports WPS WiFi Protected Setup press the WPS button on the router 2 After 2 minutes select WPS on the TV then press OK The TV connects to your network This takes about 2 minutes Most new wireless routers have the WPS system and carry the WPS logo The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP Wired Equivalent Privacy security encryption If you still need the WEP devices in your network install with Scan gt Custom Scan for routers If you have several routers in your network you can select the network you need 1 To select a specific network router press Scan on the first page of the installation The routers with WPS and the strongest signal are shown first in the list on screen 2 Select the router you need then press OK e _ If you are connecting to
73. t as Scenea then press OK 6 Press any button to exit Scenea 4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant which demonstrates the effect of your chosen setting immediately 1 While you watch TV press ff 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Continue then press OK 4 Follow the onscreen instructions to choose your preferred settings More picture settings You can change the settings in the Picture menu 1 Press ft 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust then press OK e _ Smart picture Access predefined smart picture settings e _ Reset Reset to default factory settings e Backlight Change the brightness of the TV to match the lighting condition e Video contrast Change the intensity of the bright areas keeping dark areas unchanged e Brightness Change the intensity and details of the dark areas e Colour Change colour saturation e Sharpness Change sharpness e Noise reduction Filter and reduce noise e Tint Change the colour balance e _ Custom tint Customise tint setting Only available if Tint gt Custom is selected Digital Crystal Clear Control advanced settings to fine tune each pixel to match surrounding pixels Produce a
74. then press OK 3 Select an onscreen button then press OK 4 Press 5 to exit Select speaker output Ifa connected device is HDMI Audio Return Channel HDMI ARC compliant you can output TV audio through an HDMI cable Additional audio cables are not required Make sure you connect the device to the HDMI ARC connector on the TV See Connect your TV gt About cables gt HDMI Page 36 Configure TV speakers 1 Press ff 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select an option then press OK e _ Off Switch off TV speakers e _ On Switch on TV speakers e _ EasyLink Stream TV audio through the HDMI CEC device Switch the TV audio to the connected HDMI CEC audio device through the Adjust menu e _ EasyLink autostart Switch off TV speakers automatically and stream TV audio to the connected HDMI CEC audio device Select speaker output with the adjust menu If EasyLink or EasyLink autostart is selected you can change how the TV audio is streamed to the connected HDMI CEC device 1 While you watch TV press ttt ADJUST 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device e Amplifier Stream audio throu
75. tting to Game before you start playing Switch to Game setting 1 Press tt ADJUST 2 Select Smart picture gt Game then press OK The TV is ready for gaming Note When your gaming session ends switch back to your usual Smart Picture setting View Text Select a page While you watch channels that broadcast text you can view the text 1 Select a channel that broadcasts text then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press CH CH to view the next or previous page e Press the Colour buttons to select a colour coded item 3 Press to exit Text language For digital TV channels where the broadcasters provide different text languages you can select your preferred primary and secondary language 1 Press ft 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Primary Text or Secondary Text 4 Select a language then press OK Text options 1 While you view text press B OPTIONS 2 Select an option e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen text Dual screen displays both the current channel and he text broadcast on two halves of the TV screen e _ T O P overview Table Of Pages T O P text broadcasts allow you to jump from one subject to anothe
76. watch TV press ft 2 Select Setup gt TV settings gt Preferences 3 Select Location gt Home or Shop then press OK 4 Restart the TV EN 34 Placement e _ Before you position the TV read all safety precautions See Get Started gt Important gt Safety Page 6 e Position the TV where light does not shine directly on the screen e _ The ideal viewing distance of this TV is hree times its diagonal screen size For example if the diagonal screen size of he TV is 81cm 32 the ideal viewing distance is 3 5m 138 from the front of the screen e While seated your eyes should be level with the centre of the screen Stand mount or wall mount You can apply the best settings for your TV by selecting wall mount or stand mount 1 In the Preferences menu select TV position 2 Select On a TV stand or Wall mounted then press OK Update software Check version 1 Press ft 2 Select Setup gt Software settings gt Current software inf then press OK The version of the current software is displayed Caution Do not install a lower version of software than the current version installed on your product Philips cannot be held liable or be made responsible for problems caused by a software downgrade Update the software through one of these methods e update with USB storage device e update from digital broadcast Update with USB Before you update

Download Pdf Manuals

Related Search

Related Contents

Speakman S-3245 Instructions / Assembly  FIAT 500 - Imaginarium  Trust 90W Notebook Power Adapter Express  (フラワーフォ トスタイリング講座)として    

Copyright © All rights reserved. Failed to retrieve file