Metra Dash kit
Contents
1. io housing brackets to the sides of the double DIN radio using screws supplied with the double DIN radio Figure A 3 Place the DDIN trim plate on the front of the DDIN radio Figure B Figure A 4 Reassemble dash in reverse order of disassembly Figure B y METE d INSTALLATION INSTRUCTIONS FOR PART 99 7611 REV 8 08 11 METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION2. tion and take steps toward a better tomorrow Metra recommends MECP certified technicians y METTT d 99 7611 Dash Disassembly 1 If equipped with center speaker Unclip and remove the grille then remove 4 Phillips screws to remove the speaker Figure A 2 Unclip and remove the panel below the radio including the a c controls Figure B 3 Unclip the radio trim including the a c vents then unplug the hazard switch and remove the panel Figure C 4 Remove 4 Phillips screws securing the radio Figure D Continued on next page Figure A Figure D LE d Kit Assembly 99 7611 ISO DIN head unit provision with pocket 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 2 Snap the radio housing brackets to the radio housing Figure A 3 Slide the head unit into the radio opening from behind and secure with the screws supplied with the unit Figure B d a 4 Reassemble dash in reverse order of disassembly Figure B Mena A Kit Assembly 99 7611 DDIN head unit provisions 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 2 Mount the rad
3. y METE d INSTALLATION INSTRUCTIONS FOR PART 99 7611 APPLICATIONS Nissan Rogue 2011 up 99 7611 7 KIT FEATURES e ISO DIN head unit provision with pocket e DDIN head unit provisions KIT COMPONENTS e A Radio Housing B Radio Housing Brackets e C DDIN Trim Plate WIRING amp ANTENNA CONNECTIONS Sold Separately Wiring Harness e 70 7552 Nissan harness 2010 up Antenna Adapter 40 NI12 Nissan antenna adapter 2010 up TOOLS REQUIRED Panel Removal Tool e Phillips Screwdriver e Socket Wrench METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION LE d 99 7611 Table of Contents Dash Disassembly Nissan Rogue 2011 up anne 3 Kit Assembly ISO DIN head unit provision with pocket 4 DDIN head unit provisions iris ice nn 5 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation All accessories switches and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition NOTE Refer also to the instructions included with the aftermarket radio ett KNOWLEDGE IS POWER e Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry Log onto www installerinstitute com or call E u 800 354 6782 for more informa
Download Pdf Manuals
Related Search