TV One Task
Contents
1. Instruction Manual 1T DA 552 1T DA 554 1T DA 564 DVI Distribution Amplifiers 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 Table of Contents Introduction Specifications Checking Package Contents Connecting the Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information 10 1 0 INTRODUCTION The 1T DA 552 1T DA 554 and 1T DA 564 DVI Distribution Amplifiers provide multiple outputs from a single DVI input for distribution to devices capable of receiving and or displaying such signals The 1T DA 552 provides 2 DVI outputs the 1T DA 564 provides 4 DVI outputs and the 1T DA 564 provides 4 DVI outputs plus 8 standalone audio signals 1x4 analog stereo and 1x4 S PDIF coaxial audio Each product in this series is compatible with HDMI v1 3 specifications and provides a cutting age technology that supports Deep Color 10 bit and12 bit video plus new lossless Dolby TrueHD Dolby Digital Plus and DTS HD Master Audio digital audio In addition all devices exhibit high bandwidth up to 225MHz 2 25Gbps and they provide signal amplification and equalization for high performance processing of audio and video allowing the signals to travel great distances without quality loss As a bonus feature all DVI outputs can also be cascaded Our professional video conversion products have been serving the industry for over twenty years TV One offers a full line of high qua2. LED there are status LEDs as well as other LEDS showing the unit s condition with respect to successfully executed output connections At the lower left there are three LEDs which show signal format status The first or left most LED shows whether an HDMI or DVI signal is being received Next to that LED another LED shows if the signal is encoded with HDCP High Definition Content Protection signals and a third LED shows if the signal has synchronized There are also LEDs for each output which show whether or not the output has successfully made a connection with the destination device 6 0 TROUBLESHOOTING In the event of problems first make certain that the input and output cables are no more than 30 meters long for signals to 1080p resolution and are of the highest possible quality Next make certain that the Distribution Amplifier is receiving power When operating the DA remember that DVI and HDMI devices communicate with one another so the source devices and destination device must be fully DVI or HDMI capable In addition HDCP encryption requires additional processing which also is dependent on the equipment you have connected to the sources and destination device If you experience problems using the 1T DA 552 1T DA 554 or 1T DA 564 Distribution Amplifier you should attempt to determine what is wrong by attaching each of the source devices one at a time directly to the destination device using the same cables you are u
3. 1T DA 554 Provides 1x4 Analog Stereo amp 1x4 S PDIF Audio Distribution 1T DA 564 Supports Dolby Digital Dolby Digital TrueHD and DTS HD Audio Supports 10 12 bit Color Depth Display Supports PC resolutions to 1920x1200 Supports HDTV resolutions to 1080p Supports SDTV resolutions of 480i and 576i Supports HDMI v1 3 when using Optional DVI to HDMI Adaptors Signal Equalization feature enables longer cable runs Supports Automatic Discovery of Monitor EDID Getting the Best Results There are many factors affecting the quality of results when distributing DVI type signals Some basic precautions will ensure the best possible performance from your new DVI DA Output display device The quality of the output signal will depend largely upon the type and quality of the DVI display device used For instance some video projectors just look better than others Distance between the DA sources and the display This plays a major role in the final result Long distances are possible but special measures should be taken in order to avoid cable losses These include using high quality cables Line amplifiers may also be necessary for the longest runs Input Output connection cables Low quality cables are susceptible to interference They degrade signal quality due to poor matching and can cause elevated noise levels Cables should be of the best quality Interference from nearby electrical devices These can have an adverse effect o
4. 2 DVI D DA HDMI DVI HDCP SYNC 2 1 POWER EDID Oo O O Oo O o EL INT AUTO DVI D IN 1 DVI D OUT 2 eee omo o o oo 5v DC 1T DA 552 1x2 DVI DA 1T DA 554 VORETASK 4x4 DVI D DA HDMI DVI HDCP SYNC 4 3 2 1 POWER EDID O Oo O O Oo O O O INT AUTO DVI D IN 1 2 DVI D OUT 3 4 eee o FE o 0 GEE o 0 GEES ci 5v DC 1T DA 554 1x4 DVI DA Pe AT DA 564 AVO ETASK 1x4 DVI D AUDIO DA HDMI DVI HDCP SYNC 4 3 2 1 POWER EDID O O O O O O O O INT AUTO STEREO IN SPDIF IN OUT QUT 1 2 3 4 1 2 3 4 e DVI D IN 1 2 DVI D OUT 3 4 eee o EHE o o GEES o o GEES o 0 GHEE o 0 Ho O 5v DC 1T DA 564 1x4 DVI DA with Audio 4 1 Connecting the Inputs to the Distribution Amplifiers You can connect any DVI compliant device s output to the DVI input Make certain that the DVI cable is securely plugged into the source device as well as the DVI Distribution Amplifier Always use a high quality cable as short a length as possible for best results 4 2 Connecting the Outputs to the Destination Devices Using a high quality DVI cable connect each output of the DVI DA to a DVI compliant device Use the shortest cable run possible 4 3 Connecting the Audio I O 1T DA 564 Only Connect S PDIF audio from the source device to the 1T DA 564 s S PDIF input and then connect the S PDIF outputs from the 1T DA
5. 564 s RCA connector s to the destination devices If the destination devices can accept only analog stereo audio connect stereo audio to the 1T DA 564 s input and then to the device s inputs using the 3 5mm connectors 4 4 Connecting Power All units are shipped with a Power Adapter to convert 100 240VAC 50 60Hz to 5VDC Connect the DC Output Cable from the Power Adapter to the back of the unit and then plug the Power Adapter into an AC Receptacle There is no power switch The unit begins to function as soon as it is plugged into AC 4 5 Optional Rack Mount Kit The Distribution Amplifiers can be mounted in a standard 19 equipment rack To mount either of the 1x4 DAs in a rack the optional RM 220 Rack Mount kit must be purchased Using this kit either type DA Video only or Video Audio can be mounted in the rack It s also possible to mount one of each DA in the rack using the dual rack mount capability It is not necessary to mount two of the same type of DAs 5 0 OPERATING THE DVI DISTRIBUTION AMPLIFIERS Once the input output and power cables are connected plug the AC adaptor into the AC receptacle and the Distribution Amplifier will begin to function A Power LED on the front of the unit will confirm power is present Other than connecting cables and applying power there are no other operator interventions required with the possible exception of the EDID jumper EDID Operation On the rear of the unit you ll find an EDID Jum
6. I V1 3 HDCP V1 1 Internal 20m 60 for 1080p 8 bit 15m 45 for 1080p 12 bit 15m 45 for 1080p 8 bit 10m 30 for 1080p 12 bit 3 Years Parts and Labor 41 5x218x147mm 1 6 x8 6 x5 8 0 85kg 1 88lbs 0 to 50 C 432 to 122 F 1096 to 9096 Non condensing 0 to 50 C 432 to 122 F 1096 to 9096 Non condensing 5VDC 2A FCC CE RoHS UL CUL CE PSE GS RoHS US UK or Euro Single Dual Rackmount Kit 1x2 DVI DA 1x4 DVI DA 1x4 DVI DA with Audio 1 HDMI I O is possible using optional DVI to HDMI adapters 3 0 CHECKING PACKAGE CONTENTS Before attempting to use this unit please check the packaging and make certain the following items are contained in the shipping carton e 1x 1T DA 552 1T DA 554 or 1T DA 564 DVI DA e 1x 100 240VAC to 5VDC Power Adapter e 1x Instruction Manual Note Please retain the original packing material should the need ever arise to return the unit If you find any items are missing contact your reseller or TV One immediately Have the Model Number Serial Number and Invoice available for reference when you call 4 0 CONNECTING THE HARDWARE Connect the DVI Video Source to the input of the 1T DA 552 1T DA 554 or 1T DA 564 Distribution Amplifier connect its outputs to a DVI Compliant devices or monitors and lastly connect the AC to DC Power Adapter The drawings below show the locations of the input outputs and power connector Em 1T DA 552 VORETASK 1x
7. hase with the exception of the LCD panels integrated into the monitors that are supplied by third parties LCD panels are limited to the term and conditions of the warranty offered by the respective LCD panel manufacturer Such specific LCD panel warranties are available upon request to TV One Should a product in TV One s opinion prove defective within this warranty period TV One at its option will repair or replace this product without charge Any defective parts replaced become the property of TV One This warranty does not apply to those products which have been damaged due to accident unauthorized alterations improper repair modifications inadequate maintenance and care or use in any manner for which the product was not originally intended If repairs are necessary under this warranty policy the original purchaser must obtain a Return Authorization Number from TV One and return the product to a location designated by TV One freight prepaid After repairs are complete the product will be returned freight prepaid LIMITATIONS All products sold are as is and the above Limited Warranty is in lieu of all other warranties for this product expressed or implied and is strictly limited to two years from the date of purchase TV One assumes no liability to distributors resellers or end users or any third parties for any loss of use revenue or profit TV One makes no other representation of warranty as to fitness for the purpose o
8. lity Seamless Switchers Video Scalers Up Down Cross Converters Analog Digital Converters SD HD SDI HDMI DVI Format Converters Standards Converters TBC Frame Synchronizers Matrix Routing Switchers Signal Distribution Amplifiers and Cat 5 Transmission Systems 1 1 Liability Statement Every effort has been made to ensure that this product is free of errors TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements and that it is installed correctly All rights reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher TV One reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable This statement does not affect the legal rights of the user in any way All third party trademarks and copyrights are recognised The TV One logo AV Toolbox logo TV One task and CORIO are the registered Trademarks of TV One All other trademarks are the property of their respective holders 1 2 1 3 Features DVI D 1 0 HDMI 1 3 and HDCP 1 1 Compliant Allows distribution of 2 or 4 Outputs 1T DA 552 and
9. m TV One Europe Continental Approach Westwood Industrial Estate Margate Kent CT9 4JG UK Tel 44 0 1843 873311 Fax 44 0 1843 873312 sales europe tvone com www tvone eu TV One Mercosur Honduras 5849 2 Floor Office C C1414BNI Capital Federal Buenos Aires Argentina Tel 54 11 4771 5570 Fax 54 11 4771 5570 sales latinoamerica tvone com www tvonela com TV One China Room 1007 Golden Peach Building No 1900 Shangcheng Road Pudong Shanghai China 200120 Tel 86 21 5830 2960 Fax 86 21 5851 7949 sales china tvone com www tvonechina com End of Manual 10
10. n signal quality For example an older computer monitor often emits very high electromagnetic fields that can interfere with the performance of video equipment in its proximity 2 0 SPECIFICATIONS Video Inputs DVI All Models Video Output DVI Audio Output Audio I O Analog Stereo S PDIF Audio Bandwidth Audio Impedance Audio Levels General Frequency Bandwidth Color Depth Supported PC DVI resolutions Supported HDTV Formats Compliance Signal Enhancement Maximum Distances Source to DA DA to Display Warranty Limited Warranty Mechanical Size H W D Weight Net Environmental Operating Temperature Operating Humidity Storage Temperature Storage Humidity Power Requirement External Power Supply Regulatory Approvals DVI DAs Power Supply Accessories Included 1x AC Power Adapter 1x Instruction Manual 1x Accessory Pack Optional Accessories RM 220 Product Item Numbers 1T DA 552 1T DA 554 1T DA 564 Notes 1x via DVI Connector Note 1 2x via DVI Connector 1T DA 552 4x via DVI Connector 1T DA 554 amp 1T DA 564 HD Audio including Doloy TrueHD amp DTS HD 4x via Stereo 3 5mm 1T DA 564 4x Via S PDIF RCA Coaxial 1T DA 564 20Hz to 20 KHz 1T DA 564 20KQ Stereo 75Q Coaxial S PDIF 1T DA 564 Unity Nominal S PDIF 5 1V p p 1T DA 564 2 25Gbps When using HDMI Single Link 10 12 bit Color Depth Display Up to 1920x1200 480i 480p 576i 576p 720p 1080i and 1080p DVI 1 0 HDM
11. per This jumper controls whether the DA determines the connected device s EDID Number automatically or uses an internal information table The default factory setting for the EDID Control Jumper is AUTO and you should leave it as itis if the display is operating properly Switch to INT Internal to use build in EDID information table should the display have problems When the EDID control jumper in AUTO position the unit will detect the first HDMI output source s EDID and record the value in the DA If the first detected output source is DVI it will pass to the next source in sequence until the first HDMI compliant device has been detected If the DA cannot reliably determine the destination device s EDID number through the handshake routine switching to the internal table INT allows the DA to run through a range of pre defined resolutions and refresh rates so that a reliable connection can be made The Extended display identification data EDID is a data structure provided by a computer display to describe its capabilities It s what enables the TV One OneTask DVI DA to know what kind of monitor is connected to the unit EDID is defined by a standard published by the Video Electronics Standards Association VESA The EDID includes manufacturer name product type phosphor or filter type timings supported by the display display size luminance data and for digital displays only pixel mapping data Operational LEDs Besides the Power
12. r merchantability or otherwise in respect of any of the products sold The liability of TV One with respect to any defective products will be limited to the repair or replacement of such products In no event shall TV One be responsible or liable for any damage arising from the use of such defective products whether such damages be direct indirect consequential or otherwise and whether such damages are incurred by the reseller end user or any third party 8 0 REGULATORY COMPLIANCE The 1T DA 552 1T DA 554 and 1T DA 564 DVI Distribution Amplifiers have been tested for compliance with appropriate FCC and CE rules and regulations The Power Adaptor Supplies have been tested for compliance with appropriate UL CUL CE PSE GS Rules Regulations and or Guidelines These Products and Power Adapters are RoHS Compliant 9 0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual please contact TV One at the appropriate location TV One USA 2791 Circleport Drive Erlanger KY 41018 USA Tel 859 282 7303 Fax 859 282 8225 sales tvone com www tvone com TV One Latin America 6991 NW 82 Avenue 8 Miami FL 33166 USA Tel 305 396 6275 Fax 305 418 9306 sales latinoamerica tvone com www tvonela com TV One Asia 11F NO 28 Sec 2 San Min Rd Panchiao City Taipei Hsien 220 Taiwan R O C Tel 886 2 8951 0674 Fax 886 2 8951 0675 sales asia tvone com www tvoneasia co
13. sing with the expanded system This is a way of determining if the problem is due to bad cables or a problem with the other devices If you are unable to obtain a signal using this simplified path suspect the cables the source device or the destination device After trying the above suggestions should the problem still persist contact your dealer for additional suggestions before contacting TV One Should the dealer s technical personnel be unable to assist you contact TV One via our support website http tvone crmdesk com Create a technical support request on the site and our support team will respond within a short period of time 7 0 LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase The warranty term for specific product lines is defined below 1 TV One branded products based on TV One s CORIO technology are warranted for a period of five years from the date of purchase This includes products with the model number prefix of C2 1T C2 CX A2 or S2 2 TV One task branded products other than those based on TV One s CORIO technology mentioned above are warranted for a period of three years from the date of purchase This includes products with the model number prefix of 1T with the exception of 1T C2 3 LCD Monitors are warranted for a period of three years from the date of purc
Download Pdf Manuals
Related Search