Panasonic CF-VEBD11AU
Contents
1. When inserting or removing a disc be careful not to touch the lens and other parts of the laser pickup Precautions Do not leave the tray open and do not touch the lens and other parts of the laser pickup The laser pickup and disc can become dusty in some conditions It may cause malfunction in reading or writing Do not apply excessive force to the tray in the open position Never insert a foreign object such as a paper clip into the drive Doing so may cause malfunction Do not place items other than discs on the tray While the drive is being accessed Do not open the tray or move the cradle while the drive is being accessed Doing so could cause the disc to shift position and this may damage the disc or cause the drive to malfunction In addition after running an application involv ing access to a disc close the application before opening the tray or removing the disc lt Only for model with CD DVD Drive gt li Disc Handling Care Before using a disc carefully read the operating handling instructions and package of the disc If the discs are not handled appropriately they may become dirty or scratched Furthermore the writing speed may get slower and the data may not be correctly written on or read from the disc Other damage may cause a drive failure Note the following precautions Do not touch the disc surface the side with no printing Keep the disc surface clean and free from dir2. 8X Max e R DL 6X Max e RW 4X Max eHigh Speed RW 8X Max eCD R 24X Max eCD RW 4X eHigh Speed CD RW 10X eUltra Speed CD RW 16X Max Supported Reading eDVD ROM Single Layer Dual Layer eDVD Video Discs Format eDVD R 1 4 GB 3 95 GB 4 7 GB eDVD R DL 8 5 GB eDVD RW Ver 1 1 1 2 1 4 GB 2 8 GB 4 7 GB 9 4 GB eDVD RAM 1 4 GB 2 6 GB 2 8 GB 4 7 GB 5 2 GB 9 4 GB e R 4 7 GB e R DL 8 5 GB e RW 4 7 GBY eHigh Speed RW 4 7 GBY eCD Audio eCD ROM XA compatible eCD R ePhoto CD multiple session compatible eVideo CD eCD EXTRA eCD RW eHigh Speed CD RW eUltra Speed CD RW eCD TEXT Writing eDVD RAM 1 4 GB 2 8 GB 4 7 GB 9 4 GB eDVD R 1 4 GB 4 7 GB for Generaly eDVD R DL 8 5 GBY eDVD RW Ver 1 1 1 2 1 4 GB 2 8 GB 4 7 GB 9 4 GB e R 4 7 GB e R DL 8 5 GB e RW 4 7 GB eHigh Speed RW 4 7 GB eCD R eCD RW eHigh Speed CD RW eUltra Speed CD RW Buffer underrun error pre Supported vention function N wo R oa N Does not guarantee operation of all USB and HDMI compatible peripherals When connecting the HDMI compatible display specifications such as maximum resolutions available to output differ depending on the specifications of the connected devices See the specifications of the connected device for details Data transfer speeds indicate values measured by Panasonic Corporation The data
3. For Europe 2 11 12 Using the Drive The region code of the drive is not set at purchase The operation depends on the DVD Video that is first played e DVD Video with a specific region code The drive will automatically be set at the same region code as the DVD Video e DVD Video with multiple region codes The screen to change the region code appears Set the region code CAUTION You can change the region code setting up to five times including the initial setting Be extremely careful because you cannot change the region code anymore after the fifth change even if you reinstalled the operating system Any problem resulting from illegal changing or altering of the region code is the user s responsibility NOTE The screen to change the region code appears when the DVD Video has only one region code and the drive is set for another region code E Writing to Discs amp Windows 7 includes the standard function that enables you to write or rewrite data to a disc 6 You can copy a CD DVD or create a music CD data CD DVD etc by installing Roxio Creator LJB us ing the DVD Drive Utility Disc amp Writing software is required to write data to a disc other than DVD RAM Install DVD RAM Software and Roxio Creator LUB using DVD Drive Utility Disc Be sure to use discs conforming to the proper write speeds G page 17 If the write operation is to involve a long period
4. USB 2 0 Port Pass Through lt DC IN Jack 222 Serial Port lol Connecting Disconnecting Do not connect or disconnect the cradle while the computer is powered on or in the sleep UNNE standby CNE or hibernation mode E Connecting Power off the computer and disconnect all cables from the com puter 2 Open the cover of the expansion bus connector on the rear of the computer Connect the AC adaptor that came with the computer to the cradle and plug the other end into an AC outlet CAUTION Refer to the Operating Instructions accompanying computer for information on proper handling of the AC adaptor and AC cord NOTE The AC adaptor can be stored in the AC adaptor storage com partment Open the AC adaptor storage cover Place the AC adaptor with its label side facing forward and its AC inlet side toward the left Also place the AC adaptor within the heat sink and the protrusion Finally align the core on the DC cord to the groove as illustrated ULA a Label side _ gt gt ayy K AC inlet k qn hy A aio Ra SS SSS Ee eS hi Align the protrusions on the cradle with the corresponding inden tations on the bottom of the computer and insert the computer to the cradle CAUTION Do not connect the computer to the cradle while the AC adap tor or other cables is connected
5. of time be sure to connect the AC adaptor of the com puter If the battery power runs low and the power of the computer is cut the write operation may end in failure You can read from write to the following discs CD R CD RW COMPACT COMPACT COMPACT 3 COMPACT 3 dice iSe dise disc ReWritable ReWritable ReWritable 5 1 DVD RAM DVD R DVD R DL DVD RW RDL R R DL RW DVD R DVO R DL DVD ReWritable DVDER RE You can read from the following discs CD ROM CD DIGITAL CD TEXT CD EXTRA AUDIO dise COMPACT COMPACT compact Va wise dise k DIGITAL AUDIO HIONA AUDA mmo oo extra Video CD Photo CD DVD ROM DVD Video COMPACT DVD SG K VIDEO VIDEO CD aati DVD RAM Only non cartridge type or removable cartridge type can be used Does not support DVD RW Ver 1 0 Recommended discs for writing e The quality of written data depends on the disc lt CD R gt TAIYO YUDEN Co Ltd lt CD RW High Speed CD RW gt e MITSUBISHI KAGAKU MEDIA CO Ltd lt Ultra Speed CD RW gt e MITSUBISHI KAGAKU MEDIA CO Ltd lt DVD R gt e Panasonic Corporation e MITSUBISHI KAGAKU MEDIA CO Ltd e TAIYO YUDEN Co Ltd lt DVD R DL gt e MITSUBISHI KAGAKU MEDIA CO Ltd TAIYO YUDEN Co Ltd DVD discs you can use for writing lt DVD R for General gt e 1X SPEED 4 7 GB e 1 2X SPEED 4 7 GB e 1 4X SPEED 4
6. press the eject button NOTE To remove a disc when the computer is powered off insert a pointed object e g the bent out tip of a paper clip into the emergency hole C Pushing it to the end allows the tray to come out If the vibration of the drive is excessive check the disc For AutoPlay CD DVD If an AutoPlay CD DVD does not start after the computer resumes from CUNT sleep CHNS standby or hibernation remove the disc from the drive and then reinsert it after waiting 15 seconds e An AutoPlay CD DVD may start during file access depending on the status of the disc When playing back video from a disc playback may not be smooth in some conditions E Power saving Mode If the drive is not accessed for 30 seconds the drive motor will automatically be shut down to reduce the power consumption When the drive is accessed again the drive motor is turned on In this case reading of the disc data will take approximately 30 seconds i To play DVD Video or MPEG2 files Install the DVD playback software using DVD Drive Utility Disc For information on how to install the software refer to Operating Instructions Software Guide with DVD Drive Utility Disc li Region Code Setting DVD Videos are allocated to region codes according to where they are sold To play a DVD Video the play er s software and the drive must have the corresponding region code e g For U S A and Canada 1
7. to the computer Do not attempt to make connections if there is any object between the computer and the cradle Doing so could damage the computer and the cradle Insert the expansion bus connector on the cradle into the com puter s expansion bus connector Set the computer back against the cradle so that the computer and the cradle are securely connected CAUTION While connecting the computer to the cradle Do not attempt to move the cradle e It is impossible to remove the battery pack If the computer malfunctions while the cradle is attached disconnect the cradle and check to see if the computer operates normally If the computer operates normally the cradle may be malfunctioning Con tact your technical support office E Adjusting the Angle While pressing down the angle adjustment button push or pull the upper part of the computer as illustrated to obtain the most suitable angle Avoid touching the LCD while adjusting the angle There are five levels for angle adjustment E Disconnecting Power off the computer Hold down the lever in the direction of the arrow Pull the computer toward you Disconnect the extension bus connector on the computer from the exten sion bus connector on the cradle Lift up the computer to remove it from the cradle Close the cover of the extension bus connector on the rear of the computer Connecting Disconnecting if the computer is connect
8. transfer rate of DVD per 1X speed is 1 350 KB s The data transfer rate of CD per 1X speed is 150 KB s Performance of CD R CD RW DVD RAM DVD R DVD R DL DVD RW R R DL and RW cannot be guaranteed depending on writing status and recording format Also some data cannot be played back depending on the disc settings and environment being used If an unbalanced disc e g a disc with which the balance has been displaced from the center is inserted the speed may become slower if there are large vibrations while the disc is rotating Only non cartridge type or removable cartridge type can be used DVD R is compatible with 4 7 GB for General playback DVD R for Authoring playback is compatible with discs recorded using Disc at Once recording Depending on the disc the writing speed may become slower 1 GB 1 000 000 000 bytes Your operating system or some application software will report as fewer GB 17 Panasonic Corporation Panasonic Solutions Company 3 Panasonic Way Panazip 2F 5 Secaucus NJ 07094 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Importer s name amp address pursuant to the EU GPSD General Product Safety Directive 2001 95 EC Art 5 Panasonic Computer Products Europe Panasonic Marketing Europe GmbH Hagenauer Stra e 43 65203 Wiesbaden Germany 55 E 1 Web Site http panasonic net NFVIvyARNSH ITFOPIVEVYRAZIXMY kb T 570 0021 ARRA STOT ERM TJE 108 125 PS0811 0 Panaso
9. 7 GB e 1 8X SPEED 4 7 GB e 1 16X SPEED 4 7 GB lt DVD R DL gt e 2 4X SPEED 8 5 GB e 2 8X SPEED 8 5 GB lt DVD RW gt e 1X SPEED 4 7 GB 9 4 GB e 1 2X SPEED 4 7 GB 9 4 GB e 2 4X SPEED 4 7 GB 9 4 GB e 2 6X SPEED 4 7 GB 9 4 GB lt DVD RAM gt e 2X SPEED 4 7 GB 9 4 GB e 2 3X SPEED 4 7 GB 9 4 GB e 2 5X SPEED 4 7 GB 9 4 GB lt DVD RW gt e MITSUBISHI KAGAKU MEDIA CO Ltd e Victor Company of Japan Limited lt DVD RAM gt e Panasonic Corporation e HITACHI MAXELL Ltd lt R RW gt e MITSUBISHI KAGAKU MEDIA CoO Ltd lt High Speed RW gt e MITSUBISHI KAGAKU MEDIA CoO Ltd lt R DL gt e MITSUBISHI KAGAKU MEDIA CO Ltd lt R gt e 1 2 4X SPEED 4 7 GB e 1 4X SPEED 4 7 GB e 1 8X SPEED 4 7 GB e 1 16X SPEED 4 7 GB lt R DL gt 2 4X SPEED 8 5 GB e 2 4 8X SPEED 8 5 GB lt RW gt e 1 2 4X SPEED 4 7 GB e 1 4X SPEED 4 7 GB lt High Speed RW gt e 3 3 8X SPEED 4 7 GB 13 Troubleshooting Devices connected to the USB 2 0 ports do not operate Turn off the computer disconnect it from the cradle and then reconnect it to the cradle and turn it on again Power can be turned on however Win dows does not start up normally The computer does not resume return from sleep CUMA standby HIE or hibernation Disconnect peripheral devices such as a USB memory If disconnecting the peripheral devices can start up Win dows the problem may be
10. Pack 1 or Genuine Windows 7 Professional 64 bit Service Pack 1 J indicates Genuine Microsoft Windows XP Professional Service Pack 3 Page in these Operating Instructions Reference to the on screen manuals of the computer Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and or other countries Roxio Creator is trademarks or registered trademarks of Rovi Corporation HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Precautions if a Malfunction or Trouble Occurs Immedi ately Stop Use If a Malfunction Occurs Immediately Unplug the AC Plug and Remove the Unit From This Product e This product is damaged e A foreign object is inside this product e Smoke is emitted e An unusual smell is emitted e Unusually hot Continuing to use this product while any of the above conditions are present may result in fire or electric shock e If a malfunction or trouble occurs immediately unplug the AC plug and remove the unit from this product Then contact your technical sup port office for repair Do Not Touch This Product and Cable When It Starts Thundering Electric shock may result Do Not Place Containers of Liquid or Metal Objects on Top of This Product If water or other liquid spills or if paper clips coins or foreign matter get inside this product fire
11. Panasonic OPERATING INSTRUCTIONS Cradle Model No C F V E B D1 1 Series Contents INtrOdUCHION sece c2 t occ eiueiecee dee aeaea int eae 4 PRECAULI ONS isdeaconsits 2henddaethadhosdsent dant teat lairtunedlnlitn 5 Names and Functions of Parts cccccceceeseeseseeee T Connecting Disconnecting c cccccccsseseseeeseeeees 8 Using the Drive eecctescssscsssestsesesseseseesenesevsnene none nenne 11 Troubleshooting wxctccrcntnret Seekers eters ances 14 SPeciiCalONne xcs coceian eee eek atete nse 16 Please read these instructions carefully before using this product and save this manual for future use For U S A Federal Communications Commission Radio Frequency Interference Statement Note This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules There limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense e Reorient or relocate the receiving antenna e Increase the separation between the equ
12. ed to the cradle connect the AC adaptor and the LAN cable to the jack and port on the cradle You cannot use the LAN port on the computer Note that the AC adaptor can also be connected to the DC IN jack of the computer Do not connect disconnect peripheral devices in sleep UiitEax standby UIKETeeG p or hiberna tion J If a printer that is connected to a USB port is disconnected devices connected to the other USB ports may stop functioning If this occurs restart the computer When using the USB 2 0 port confirm that USB Port is set to Enable in the Advanced menu of the Setup Utility on the computer For more information about the settings and preparations of the peripheral devices refer to the peripheral devices own operating instructions When connecting the external display to either of the ports lines or letters may blur In that case lower the resolution Connect headphones to the computer or to the cradle Do not connect two sets of headphones to the computer and the cradle 10 Using the Drive lt Only for model with CD DVD Drive gt Setting a Disc Turn on the computer Press the eject button A and slowly pull out the tray Insert Remove the disc e To insert Set the disc with the label side up and press the center of the disc until it clicks in place e To remove Press on the center spindle B and carefully lift up the edge of the disc Close the tray Do not
13. er Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal 36 E 1 For Australia Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Introduction Thank you for purchasing the cradle for the Panasonic CF D1 series By connecting your peripheral devices to the cradle you can save yourself the trouble of having to connect and disconnect several cables every time you transport the computer 1 This cradle cannot be used for other models E Accessories Safety Precautions and Regulatory Information lt Only for model with CD DVD Drive gt DVD Drive Utility Disc Not provided for Some models s sssssesssesesssseesssereeseeees 1 2 This contains the programs used to install Roxio Creator LJB hereafter Roxio Creator LJB CyberLink PowerDVD hereafter PowerDVD and DVD RAM Software only for Windows XP About software overview and installing the software see Operating Instructions Software Guide in DVD Drive Utility Disc NOTE This manual explains the procedure for default settings The procedure may differ according to the set tings indicates Genuine Windows 7 Professional 32 bit Service
14. ied with the com puter or one sold separately as an accessory Expansion Bus Connector 100 pin USB 2 0 Port USB 2 0 x 5 complies with USB 2 0 Allowable current for each port 500 mA USB 2 0 Port Pass Through USB 2 0 x 1 complies with USB 2 0 Allowable current for each port 500 mA LAN Port IEEE802 3ab 1000BASE T IEEE802 3u 100BASE TX IEEE802 3 10BASE T RJ 45 HDMI Port HDMI x 1 For exclusive use with HDMI standard VGA Port Mini Dsub 15 pin female Analog interface Serial Port RS 232C Dsub 9 pin Microphone Jack Miniature jack 3 5 DIA Headphone Jack Physical Dimensions W x H x D Miniature jack 3 5 DIA Approx 292 mm x 233 mm x 284 mm Approx 11 5 x 9 2 x 11 2 Weight lt Only for model with CD DVD drive gt Approx 5 1 kg 11 2 Ib lt Only for model without CD DVD drive gt Approx 5 0 kg 11 Ib 16 lt Only for model with CD DVD drive gt Item Description CD Continuous Reading eDVD RAM 5X Max eDVD R 8X Max DVD Data Transfer eDVD R DL 8X Max eDVD RW 8X Max Drive Speed eDVD ROM 8X Max e R 8X Max e R DL 8X Max e RW 8X Max eHigh Speed RW 8X Max eCD ROM 24X Max eCD R 24X Max eCD RW 24X Max eHigh Speed CD RW 24X Max eUltra Speed CD RW 24X Max Writing eDVD RAM 5X Max eDVD R 8X Max eDVD R DL 6X Max eDVD RW 6X Max e R
15. ipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the Panasonic Service Center or an experienced radio TV technician for help Warning To assure continued compliance use only shielded interface cables when connecting to a computer or peripheral Also any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This device is Class A verified to comply with Part 15 of FCC Rules when used with Panasonic Notebook Computer Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Tel No 1 800 LAPTOP5 1 800 527 8675 ave For Canada Pour le Canada Canadian ICES 003 This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme la norme NMB 003 du Canada 7 M 2 Interface Cable Use of an interface cable longer than 3 m 9 84 feet is not recommended 11 E 1 Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be req
16. l phone lines onpremise switches digital public phones etc Do Not Turn the Volume Up Too Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing lt Only for model with CD DVD Drive gt Do Not Look Into the CD DVD Drive Looking directly at the internal laser light source may result in damage to eyesight lt Only for model with CD DVD Drive gt Do Not Use Discs That Are Cracked or De formed Because the discs rotate at high speeds dam aged discs may break apart causing injury e Discs that are not round and discs that have been repaired using adhesives are similarly dangerous and so should not be used Using this product continuously in a hot en vironment will shorten the product life Avoid use in these types of environments When using in hot or cold environment some peripherals may fail to work properly Check the operation environment of the peripherals lt Only for model with CD DVD Drive gt W Drive Handling Care Do not expose the drive to excessive smoke that may leave a residue e g oil smoke or tobacco smoke Doing so can shorten the life of the drive lens We recommend cleaning the drive lens with an air puffer used for camera lenses Do not use any spray type of lens cleaning prod ucts When opening closing the tray When the computer is on use the eject button G page 11 or eject through Windows
17. nic Corporation 2011 PCE0336A_XP 7
18. occur if the drive is accessed by the application soft ware automatically In this case remove the disc reinsert it and try again page 11 Roxio Creator LJB does not work prop erly Is writing software other than Roxio Creator LJB installed Uninstall the writing software other than Roxio Creator LJB Be sure to disable writing to CDs DVDs Right click x in start My Computer click Properties Recording then remove the check mark for Enable CD recording on this drive Remove the check mark for Enable CD recording on this drive every time a new user is added 1 x is the drive letter You can change the letter to suit your preference 14 Cannot eject disc Turn on the computer To remove a disc when the computer is powered off insert a pointed object e g the bent out tip of a paper clip into the emergen cy hole A Pushing it completely to the end will free the tray so that it can be pulled out If a disc with fingerprints or other dirt is used you may not be able to remove it Use a clean disc page 6 The disc tray does not close Do not touch the eject button when closing the tray Other disc operation reading writing rewriting problems Use another drive or media 15 Specifications _ Item Description Power Supply Input DC15 6 V Use the specified AC adaptor suppl
19. or electric shock may result e If foreign matter has found its way inside im mediately unplug the AC plug and remove this product from the unit Then contact your techni cal support office Do Not Place This Product on Unstable Sur faces If balance is lost this product may fall over or drop resulting in an injury Do Not Keep This Product Wherever There is a Lot of Water Moisture Steam Dust Oily Vapors etc Otherwise possibly resulting in fire or electric shock Do Not Leave This Product in High Tempera ture Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and or cause trouble in the internal parts Continued use in such a resulting condition may lead to short circuiting or insulation defects etc which may in turn lead to a fire or electric shocks Use Only the Specified AC Adaptor With This Product Using an AC adaptor other than the one supplied supplied with the unit or one sold separately as an accessory may result in a fire Do Not Connect a Telephone Line or a Net work Cable Other Than the One Specified Into the LAN Port If the LAN port is connected to a network such as the ones listed below a fire or electric shock may result Networks other than 1000BASE T 100BASE TX or 10BASE T e Phone lines IP phone Internet Protocol Tele phone Telephone lines interna
20. r pins or terminals of the cradle E Front Expansion Bus Connector Connect this to the expansion bus connector on the rear of the computer Latch When the lever is depressed the Lever latch is released Press down on this when removing the computer Angle Adjustment Button zn Adjust the angle of the computer NS while holding this button down CD DVD Drive lt Only for model with CD DVD Drive gt E Rear HDMI Connector Hom Connector for HDMI compatible digital display It is not compatible with the analog display The display specifications of the maximum resolution etc that can be output differ according to the specifications of the device connected For details refer to the specifications of the device connected VGA Port Connect the external display compatible with analog interface For how to switch the output destination when both an external display analog and HDMI display are connected to the cradle refer to Reference Manual External Display When the computer is connected to the cradle the VGA port on the AC Adaptor Storage Compartment computer is disabled The AC adaptor and cord can be stored here Security Lock A Kensington cable can be connected For further information read the manual that comes with the cable AC Adaptor Storage Cover Microphone Jack 7 Headphone Jack N LAN Port 3 USB 2 0 Ports lt
21. t dust fingerprints and scratches Do not write on the surface of the disc with a ballpoint pen or other writing instrument Do not attach stickers to discs Do not drop bend or place heavy objects on top of discs Do not place or store discs in locations exposed to heat direct sunlight humidity or dust If a disc is brought from a cold to a warm loca tion condensation may form on the disc For read only discs wipe off the condensation using a soft dry lint free cloth before using the disc For recordable rewritable discs wait until the condensation dries e When not using discs keep them in their pro tective cases or cartridges To clean discs lt For read only discs gt Wipe discs with a dry soft cloth from the center toward the edge If discs get very dirty wipe with a moist soft cloth from the center toward the edge then wipe again with a dry cloth to take up remaining moisture lt For recordable rewritable discs gt Use the recordable rewritable disc cleaner to clean these discs Do not use a cloth CD cleaners or any other such cleaners under any circumstances How to hold a disc Names and Functions of Parts The cradle allows your peripheral devices to function exactly as if they were connected directly to the com puter Refer to Description of Parts in the Operating Instructions accompanying the computer CAUTION Do not touch the cradle connecto
22. uired to take adequate measures Do not use other than the specified AC Adaptor Model No CF AA5713A Declaration of Conformity DoC Hereby Panasonic declares that this Cradle is in compliance with the essential requirements and other relevant provisions of EU Council Directives Authorised Representative Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany PEF lt Only for model with CD DVD Drive gt CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL The following label is put on the bottom of the cradle 12 E 1 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 LASER KLASSE 1 Information on Disposal for Users of Waste Electrical amp Electronic Equipment private house holds This symbol on the products and or accompanying documents means that used electrical and electronic prod ucts should not be mixed with general household waste Please dispose of this item only in designated national waste electronic collection schemes and not in the ordinary dust bin For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further informa tion Information on Disposal in oth
23. with the peripheral devices Contact the manufacturer of such devices Make sure the AC adaptor is connected to the DC IN jack of the cradle and turn the computer on The computer does not power off Win dows does not shut down if a peripheral is connected disconnect it and then shut down If it is possible to shut down when the peripheral is discon nected then there may be a problem with the peripheral Contact the manufacturer of such devices Nothing is displayed or the display does not appear properly on the external dis play connected to the HDMI terminal The HDMI compatible display does not support the HDMI connection on the computer When the HDMI compatible display does not support the HDMI connection on the computer the screen may appear blurry or the output destination may not be switched by the display driver lt Only for model with CD DVD Drive gt The computer does not recognize the drive Restart the computer Power off the computer then remove and connect the com puter again Cannot access to the disc Is the disc loaded on the tray correctly Cannot play disc or read data from it Is the disc bent scratched or dirty An error may occur if after the tray has been closed or op eration has been resumed from the U sleep CHASED standby or hibernation the drive is accessed before the hard disk drive indicator goes off Also an error may
Download Pdf Manuals
Related Search