Pyle PCMX260MB audio amplifier
Contents
1. 3 CD TAPE Auxuliary input with Gain Control Stereo RCA This knob controls J e 2 oft the level of the RCA input This stereo RCA input can T be used to connect a CD MP3 or other audio source To connect to a portable device with a 1 8 headphone jack you need a standard 1 8 to RCA adapter which is NOT included Treble Control This knob controls the treble Middle Control This knob controls the middle Bass Control This knob controls the bass Master Volume Control This knob controls the master volume MP3 Player Power Adapter IEC Insert the included power cable here to charge the unit Note that it can run off the power adapter while it simultaneously charges the battery The charge indicator illuminates when the battery is charging 10 Power ON OFF Switch 11 Voltage Selector Set this to the correct voltage for your location standard 12 Link Output This 14 jack is a stereo line level output that can be connected to the stereo input of an amplifier or amplified loudspeaker such as another 13 Battery Level Indicator While the unit is powered ON these four lights indicate the power left in the battery Battery life varies based on volume and usage IMPORTANT NOTES Use this troubleshooting guide if The sound is distorted at high volumes SS a geoPgeee e Gee o 63 o oa os pPoNpTmS e Input is clipping Try lowering the input g2. PYLE USER S MANUAL PRO PCMX260MB Battery Powered Portable USB SD MP3 PA System Microphone Included www pyleaudio com QUICK SETUP GUIDE EN 1 Make sure all items listed on the front of this guide are included in the box 2 READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT 3 MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE Study this setup diagram Place product in an appropriate position for operation Make sure all input devices such as microphones CD players mp3 players and linked amplifiers PAs are turned off and volume settings are set at zero Connect all devices as shown above Connect the stereo outputs to the power amplifier s tape decks and or audio sources Switch everything on in the following order oad audio input sources i e microphones instruments CD MP3 Players last any amplifiers 10 When turning off always reverse this operation by e tuming off amplifiers e last any input devices LISH pas osx Cable sold separately DIAGRAM AND PARTS DESCRIPTION 1 Microphone 1 Balanced Input with Gain Control 1 4 and XLR This jack can either take a 1 balanced or a XLR balanced cable An XLR Cable is included with the microphone 2 Instrument Microphone 2 Input with Gain Control 1 4 This mono input accepts a 14 input such as a microphone guitar or other musical instrument
3. ain or the volume control on your sound source or music instrument Output is clipping Lower the main volume level e There is too much bass Try adjusting the tone or EQ control on your sound source to lower the bass level This will allow you to play the music louder before clipping distortion occurs g The link cable is being plugged into the instrument or MIC input instead of the RCA line input Important With all large speakers an initial break in period is needed to perform at optimal levels To properly break in play an audio source at medium volume for a few hours SPECIFICATIONS Input Voltage AC 100 120V 60Hz 220 240V 50Hz Output Wattage Peak 400W Output Wattage RMS 200W 1 THD Frequency Response 70Hz 50kHz 3dB Bottom pole mount specifications Standard Pole Mount found at professional audio retailer Depth 80mm 3 15 Diameter 35 5mm 1 40 Time required to fully charge under 4 hours Battery life Over 12 hours at full volume when fully charged Note Battery life may vary based on temperature age and volume usage of product 2
Download Pdf Manuals
Related Search