Philips Micro Hi-Fi System MC127
Contents
1. spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Risk of overheating e ever install this product in a confined space Always leave a space of at least four inches around the product for ventilation ake sure that curtains or other objects never cover the ventilation slots on the product Risk of contamination e Install the battery correctly and as marked on the remote control e Remove batteries if the remote control is not used for a long time Risk of swallowing batteries e The unit remote control may contain a coin type battery which can be swallowed e Keep the battery out of children s reach at all times Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Ce This product complies with the radio interference requirements of the European Community s Your product is designed and manufactured with high quality materials and components which can be recycled and reused K When this crossed out wheeled bin symbol is attached to a product it means that the product is cover2. Register your product and get support at www philips com welcome MC127 PHILIPS PHILIPS PHILIPS EN User manual PHILIPS Contents 1 Important Safety Notice vh p Your Micro Hi Fi System Introduction What s in the box Overview of the main unit Overview of the remote control oo ND OO Connect Connect speakers Connect power O O O Get started Prepare the remote control Turn on Play disc Play options A Adjust volume level and sound effect Adjust volume level Enhance bass Mute sound Listen to radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station NNNN Www NN NN Other features Listen to an external device Product information Specifications ROA 10 Troubleshooting EN English 1 Important Safety Know these safety symbols CAUTION TION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation mark calls attention to features for which you should read the enclosed literatur
3. aratus includes this label CLASS 1 LASER PRODUCT Class Il equipment symbol This symbol indicates that this product has a double insulation system Note e The type plate is located on the bottom of the apparatus EN 5 English 2 Your Micro Hi Fi System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www Philips com welcome Introduction With this unit you can e enjoy audio from discs and other external devices e listen to radio stations You can enrich sound output with the following sound effect Dynamic Bass Boost DBB The unit supports the following media format COMPACT aise DIGITAL AUDIO What s in the box Check and identify the contents of your package e Main unit e 2 speakers e Remote control e MP3 link cable User manual Overview of the main unit Oe OO SOURCE MICRO MUSIC SYSTEM MCI2T Previous a OJO k s 3 G a L STANDBY eu e Indicate the standby mode e __ Start or pause play POWER VOL e Turm on off the unit e Adjust volume e Switch to standby mode B Display panel SOURCE e Show current status e Select a source disc FM or AUX Disc compartment DBB e Turn
4. e red R socket on the back of the main unit and the black wi socket For another speaker re into the black R repeat step 1 to insert the wires into black L socket nsert the speaker wi he red L and the sert each speaker wire Hold down the socket flap re fully Release the socket flap Connect power e Risk of product damage Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi Fi system e Before connecting the AC you have completed all ot power cord make sure that her connections Connect outlet he AC powe r cable to the power EN English 4 Get started Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the rear of the apparatus Write the numbers here Model No Serial No Prepare the remote control pE Caution e Risk of explosion Keep batteries away from heat sunshine or fire Never discard batteries in fire e Risk of decreased battery life Never mix different brands or types of batteries e Risk of product damage When the remote control is not used for long period
5. e closely to prevent operating and maintenance problems Risk of electric shock or fire ever place the product and accessories near naked flames or other heat sources cluding direct sunlight nplug this apparatus during lightning storms or when unused for long periods of time e Where the mains plug or an appliance coupler is used as the disconnect device he disconnect device shall remain readily operable CI Risk of short circuit or fire e Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power outlet if he voltage is different Risk of injury or damage to the product e Follow all instructions e Heed all warnings e Clean only with dry cloth 4 EN e ever remove the casing of this apparatus ever lubricate any part of this apparatus e ever place this apparatus on other electrical equipment ever look into the laser beam inside the apparatus Only use attachments accessories specified by the manufacturer e Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles e Refer all servicing to qualified service personnel Servicing is required when he apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been
6. ed by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health K Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Copyright notice Be responsible Respect copyrights This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited This app
7. ent play information Program tracks You can program a maximum of 20 tracks 1 Indisc mode in the stop position press PROG to activate the program mode L gt P progra10m is displayed 2 Press lt 4 PPI to select a track number and then press PROG to confirm 3 Repeat steps 1 to 2 to select and store more tracks to program 4 Press PIN to play the programmed tracks L gt During play P is displayed e To erase the program in the stop position press El EN 11 English 6 Adjust volume level and sound effect Adjust volume level During play press VOL to increase decrease the volume level Enhance bass During play press DBB to turn on or off dynamic bass enhancement Mute sound During play press MUTE to mute or restore the volume 12 EN 7 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select FM source 2 Press and hold 144 gt gt for more than 2 seconds L gt The radio tunes to a station with strong reception automatically 3 Repeat step 2 to tune to more stations e To tune to a weak station press ki lt gt gt repeatedly until you find optimal reception Program radio stations automatically Note You can program a maximum of 20 preset FM radio stations In tuner mode press and hold PROG for more than 2 seconds to activate automatic program mode Ly AUTO auto is displayed All availab
8. fications Amplifier Rated Output Power 2x 2W RMS Frequency Response 60 16 kHz 3 dB Tuner Tuning Range FM 87 5 108 MHz Tuning grid 50 KHz Sensitivity Mono 26dB S N Ratio lt 22 dBf Stereo 46dB S N Ratio lt 43 dBf Search Selectivity gt 28 dBf Total Harmonic Distortion lt 3 Signal to Noise Ratio gt 55 dB Speakers Speaker Impedance 8 ohm Speaker Driver 3 5 full range Sensitivity gt 82 dB m W Signal to Noise Ratio gt 50 dBA General information Aux Input 0 5 V RMS 20 kohm AC power 220 230 V 50 Hz Disc Operation Power 12W Consumption Laser Type Semiconductor Standby Power ey Disc Diameter 12 cm 8 cm Consumption Support Disc CD DA CD R Dimensions CD RW Main Uni 152 x 175 x 205 mm Audio DAC 24 Bits 44 1 kHz WxHxD Total Harmonic lt 1 Speaker Box 132 x 175 x 158 mm Distortion WxHxD Frequency Response 60 Hz 16 kHz Weight 441 kHz Rn dn En kg Main Uni 1 kg Nene eaves Speaker Box 2x 0 9 kg 14 EN 10 Troubleshooting Caution e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips co
9. ijke Philips Electronics N V All rights reserved MC127_12_CCR_V1 0 PHILIPS
10. le stations are programmed in the order of waveband reception strength L gt The first programmed radio station is broadcast automatically Program radio stations manually Note You can program a maximum of 20 preset radio stations 1 Tune to a radio station 2 Press PROG to activate program mode L gt P is displayed 3 Press PRESET to allocate a number to this radio station and then press PROG to confirm L gt The preset number and the frequency of the preset station are displayed 4 Repeat the above steps to program other stations Tip To overwrite a programmed station store another station in its place Select a preset radio station n tuner mode press PRESET to select a preset number Ea e Position the antenna as far as possible from TV VCR or other radiation source e For optimal reception fully extend and adjust the position of the antenna 8 Other features Listen to an external device You can listen to an external device through this micro Hi Fi system 1 Press SOURCE repeatedly to select AUX source 2 Connect the supplied MP3 link cable to e MP3 LINK jack 3 5 mm on the unit e the headphone jack on an external device 3 Start to play the device see the device user manual EN 13 English 9 Product information Note Product information is subject to change without prior notice Speci
11. m welcome When you contact Philips ensure that the apparatus is nearby and the model number and serial number are available No power Ensure that the AC power cord of the unit is connected properly e Ensure that there is power at the AC outlet e Asa power saving feature the system switches off automatically 15 minutes after track play reaches the end and no control is operated No response from the unit Disconnect and reconnect the AC power plug and then turn on the system again No sound or poor sound e Adjust the volume Check if the speakers are connected correctly Check if the stripped speaker wires are clamped Remote control does not work e Before you press any function button first select the correct source with the remote control instead of the main unit Reduce the distance between the remote control and the unit e Insert the battery with its polarities signs aligned as indicated e Replace the battery e Aim the remote control directly at the sensor on the front of the unit No disc detected nsert a disc e Check if the disc is inserted upside down e Wait until the moisture condensation at he lens has cleared e Replace or clean the disc e Use a finalized CD or correct format disc Poor radio reception e Increase the distance between the unit and your TV or VCR e Fully extend the antenna EN 15 English 2011 Koninkl
12. s remove the batteries e Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type For first time use 1 Remove the protective tab to activate the remote control battery To replace the remote control battery 1 Open the battery compartment 2 Insert one CR2025 battery with correct polarity as indicated 3 Close the battery compartment Turn on Press POWER Ls The unit switches to the last selected source Switch to standby Press POWER again to switch the unit to standby mode L gt The red standby indicator turns on L gt The backlight on the display panel turns off 5 Play disc Repeat play 1 During play press REPEAT repeatedly to select 1 Press SOURCE repeatedly to select the e r1 play the current track repeatedly disc source rA play all tracks repeatedly 2 Open the disc compartment 2 To return to normal play press REPEAT 3 Insert a disc with the printed side facing up repeatedly until repeat mode is no longer 4 Close the disc compartment displayed e To pause resume play press PII e To stop play press ll Play options Skip to a track During play press Ma PPI to select another track Search within a track 1 During play press and hold Kd PPI 2 Release to resume normal play Display play information During play press DISPLAY repeatedly to select differ
13. s on or off dynamic bass enhancement PROG e Program tracks e Program radio stations MP3 LINK e Jack for an external audio device gt gt e Skip to the previous next track e Search within a track or disc e Tune to a radio station a e Stop play or erase a program EN English Overview of the remote control O OOo POWER e Turn on off the unit e Switch to standby mode e Turns on or off dynamic bass boost e Stop play or erase a program Pil e Start or pause play oo O v E ea gt gt e Skip to the previous next track e Search within a track or disc e Tune to a radio station VOL e Adjust volume PRESET e Select a preset radio station DISPLAY e Show current status MUTE e Mute or restore volume PROG e Program tracks e Program radio stations REPEAT e Play a track or all tracks repeatedly SOURCE e Select a source disc FM or AUX 3 Connect Connect speakers Note Insert the stripped portion of each speaker wire into the socket completely For optimal sound use the supplied speakers only Connect only speakers with impedance that is the same or higher than the supp Specifications section of this manual ied speakers Refer to the 1 2 To in 1 2 3 For one speaker insert the red wire to th
Download Pdf Manuals
Related Search