Home

Toshiba 19EL833

1. Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Power Save Mode using Up or Down buttons and use Left or Right to set See the section Environmental Information in this manual for further information on Power Save Mode Blue Background Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Blue Background using Up or Down buttons and use Left or Right to set If the signal is weak or absent the TV will automatically change to a blue screen To enable this set Blue Background to On Software Upgrade This feature helps to keep your TV updated It works automatically and searches for new information when available Note that this setting is inactive to be modified To ensure that your TV always has the most update information you can use this setting In order for the proper operation please ensure that the TV is set to standby mode Upgrade options Automatic scanning lt Enabled gt Scan for upgrade OK You can enable or disable automatic upgrade by setting Automatic Scanning option You can manually search for new software by selecting Scan for upgrade Hard of Hearing Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select othe
2. 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the television MP3 licence letter MPEG Layer 3 audio coding technology licensed from Fraunhofer LLS and Thomson AVC licence letter THIS PRODUCT IS LICENSED UNDER THEAVC PATENT PORTFORIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER TO I ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR II DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED INAPERSONALAND NON COMMERCIALACTIVITY AND OR WAS OBTAINED FROMA VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM Q DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Cleaning the screen and cabinet Turn off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this maycause damage Disposal The following information is only for EU member states Disposal of products The crossed out wheeled dust bin symbol
3. Why is the sound only coming from one speaker when stereo sound is selected Check that the balance in the SOUND menu hasn t been set to one side Why are there problems with analogue text service Good performance of the analogue text depends on a good strong broadcast signal This normally requires a roof or loft aerial If the text is unreadable or garbled check the aerial Go to the main index page of the analogue text service and look for the User Guide What is DVB T Digital Video Broadcast via an aerial antenna How are radio channels selected You can select them via the Channel List What can be done if the PIN number has been forgotten You can reset TV and perform first time installation Ensure that no one else can use this by removing the Owner s Manual Why are there horizontal stripes and or blurred images on the screen when in PC mode The Phase may need adjustment Select PC Settings and highlight Phase and adjust until the picture cleared 02 06 2011 20 56 12 Questions and Below are the answers to some of the most common queries For more information go to www toshiba co uk Q Q Why doesn t the Media Browser feature operate Make sure that USB is connected correctly Incorrect behaviour may occur with a USB Hub connection Why is the digital channel locked Parental control is activated Check parental settings Why are some encrypted digital channels unavailable Yo
4. five HD Trial No Information 800 Sky News No Information 801 CNBC Europe AE Norioate TK options Ware E vent oetais ist Schedule Hil Timetine schedule e For information on a highlighted programme press i button e For details of other programmes currently available press cursor buttons to scroll up and down or scroll left right through the list As channels are selected details of the programme currently being broadcast will appear e To set the timer for a selected programme press the OK button to select Timers menu e Press YELLOW button to switch to timeline view Press GREEN button to list the schedule e Press BLUE button to display filtering options Note There are alternative views of EPG screen Button functions will be displayed at the bottom of the menu screen Programme Guide Thu 07 06 20 20 Thu 07 06 72 00 RTE 2 BBC TWO SM nay Gent Stoge E 7 BBC THREE ce once otis Sd 70 CBBC Channel hiss CS 80 BBC NEWS 24 105 BBCI 503 ITV HD Trial 504 Ch HD Trial 505 five HD Trial 800 Sky News 801 CNBC Europe ae doy Ben Fiter jump Bl eventvetats Search Select Genre COUT Now BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS 24 105 BBCi 503 ITV HD Trial 504 Ch4 HD Trial 505 five HD Trial 800 Sky News 801 CNBC Europe 802 TYSMONDE EUROPE eLeaTe DD Tnavigete m rime stce ext rime stce M Prev day MJext day CTEXt iter 0 9 jump 0K
5. Any function relative to the digital television with the DVB logo is available only within the country or area where such signals are transmitted Verify with the salesperson if it is possible to receive a DVB T signal in the zone where you live e Even if the television conforms to the DVB T specifications the compatibility to future digital DVB T transmissions is not guaranteed e Some digital television functions may not be available in some countries The DVB T system present in this device is FTA Free to air e DVB is a registered trademark of the DVB Project This logo indicates that the product is compliant with European Digital Broadcasting Possible Adverse Effects on LCD Screen If a fixed non moving pattern remains on the LCD screen for long periods of time the image can become permanently retained on the LCD TV panel and cause subtle but permanent ghost images This type of damage is NOT COVERED BY YOUR WARRANTY Never leave your TV on for long periods of time while it is displaying the following formats or images e Fixed Images such as stock tickers video game patterns TV station logos and websites e Special Formats that do not use the entire screen For example viewing letterbox style 16 9 media on a normal 4 3 display Black bars at top and bottom of screen or viewing normal style 4 3 media on a widescreen 16 9 display Black bars on left and right sides of screen IMPORTANT INFORMATION TV Install
6. Sound icon by using Left or Right button Press OK button to view Sound Settings menu Sound Settings Volume Equalizer Balance Headphone AVL Dynamic Bass Digital Out Ea navigate CD change vatue Back MENU Exit Operating Sound Settings Menu Items e Press Up or Down button to highlight a menu item Use Left or Right button to set an item e Press MENU button to exit Volume Select Volume using Up or Down button and then use Left or Right button to set volume level Equalizer Only for speaker You can customize current sound mode settings Select the appropriate mode in accordance with the installation location of the TV and adjust the equalizer on screen as desired Press OK button to view equalizer sub menu Equalizer Settings Mode lt Music 120Hz 500Hz 1 5KHz 5 0KHz 10 0KHz In equalizer menu the preset can be changed to Music Movie Speech Flat Classic and User Press the MENU button to return to the previous menu Note Equalizer menu settings can be changed manually only when the Equalizer Mode is in User Balance Only for speaker This setting is used for emphasizing left or right speaker balance e Press Left or Right button to change the level of the balance Balance level can be adjusted between 31 and 31 Headphone This setting is used to set the sound output when headphones are connected Press Up or Down button to select Headphone P
7. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OP ERABLE Note Interactive video games that involve shooting a gun type of joystick at an on screen target may not work with this TV iia A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 3 02 06 2011 20 55 53 Installation and Important Information Where to install Sturdy tie as short as possible Button and stand style is dependent on model P Clip position on TV is dependent on model Locate the television away from direct sunlight and strong some parts of the screen may be missing picture elements or lights Soft indirect lighting is recommended for comfortable have luminous spots This is not a sign of a malfunction viewing Use curtains or blinds to prevent direct sunlight falling on the screen Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage Place the TV on a stable level surface that can support the the screen Also please be certain that small items cannot be weight of the TV In order to maintain stability and prevent inserted into slots or openings in the case it falling over secure the TV to a wall using a sturdy tie to the clip on TV Install the P clip under the stand as shown in r the above illustration Turn off the power and clean the screen and cabinet with a soft dry cloth We re
8. TV may not support different resolutions Supported resolution modes are listed below If you switch your PC to an unsupported mode a warning OSD will appear on the screen Resolution Frequency 640x400 70 Hz 640x480 60 Hz 640x480 75 Hz 800x600 60 Hz 800x600 75 Hz 1024x768 60 Hz 1024x768 70 Hz 1024x768 75 Hz 1152x864 75 Hz 1280x768 60 Hz 1280x1024 60 Hz 1360x768 60 Hz 2 3 4 5 6 7 8 9 36 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inda 36 02 06 2011 20 56 11 Appendix B AV and HDMI Signal Compatibility Input Signal Types Supported Signals Available EXT SCART PAL 50 60 0 NTSC 60 RGB 50 RGB 60 SIDE AV PAL 50 60 NTSC 60 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 1080p 24Hz oj ojolioloiololiojololololiolololololojolojolololojlojlo X Not Available O Available Note In some cases a signal on the LCD TV may not be displayed properly The problem may be an inconsistency with standards from the source equipment DVD Set top box etc If you do experience such a problem please contact your dealer and als
9. are slightly cut off This zooms up the wide picture 16 9 aspect ratio to the full screen 02 10 TT 24 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 24 02 06 2011 20 56 08 Configuring PC Picture Settings You can set PC Mode picture settings when using the TV as a PC monitor PC Picture Settings While in VGA PC mode some items in Picture menu will be unavailable Instead VGA mode settings will be added to the Picture Settings while in VGA PC mode PC Picture controls Contrast Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu Select Reset and press OK button to reset the adjustments Note For switching to VGA PC source press button on your remote control and select VGA PC input Note that VGA PC mode menu settings are available only while the TV is in PC source PC Position Select this to display PC position menu items PC Position Autoposition H Position V Position Dot Clock Phase Autoposition If you shift the picture horizontally or vertically to an unwanted position use this item to put the picture into correct place automatically Select the PC POSITION option from the main menu PC Position menu appears on the screen e Press the Down button to highlight Autoposition and then press the OK button H Position H Horizontal Position shifts the
10. cable is connected and a Common Interface module is not inserted before switching on the TV for the first time installation 1 Connect the mains plug and switch the TV into on using the side standby switch If the TV does not switch on press any numbered or standby 6 button on the remote control then the language selection menu will be displayed This screen will appear the first time that the television is switched on and each time the television is reset First time installation Bienvenue Veuillez choisir une langue Fran ais W hlen Sie bitte Ihre Sprache aus Deutsch Selezionate la vostra lingua Italiano 7 Bienvenido seleccione un idioma Espa ol Ho geldiniz l tfen dil se imini yap m z T rk e te va jezik Slovenski Svenska dv z lj k k rj k v lassza ki a nyelvet Magyar Bem vindo favor selecionar seu idioma Portugu s Tervetuloa valitse kielesi Suomi FA setect Language set anguage 2 By pressing the Up or Down buttons highlight the language you want to set and press OK button The following message will be displayed next First time installation Welcome Country 8 Teletext Language Scan Encrypted EE Select setting IE hose your country start search 3 By pressing Left or Right button select the country you want to set and press Down button to highlight Teletext Language option Use Left or Right button to select desired Teletext Language 4 Press Dow
11. channel 18 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 18 02 06 2011 20 56 06 Viewing Info Banner Electronic Programme Guide Viewing Info Banner e Press i button the information screen will appear giving details of the channel and programme currently being viewed sm o o a 20 17 Now a 20 00 21 00 Next 21 00 22 00 1 BBC ONE m DVB T CH45 Holby City Hustle Drama Drama e Whenever you change channel the TV displays the broadcast picture along with an information banner at the bottom of the screen available only in DTV mode This will remain on the screen for a few seconds e If the selected channel is locked you must enter the correct four numeric code to view the channel Enter PIN will be displayed on the screen in such a case Enter PIN e Enter the 4 digit PIN number to continue Electronic Programme Guide Select the on screen guide by pressing GUIDE the guide screen will appear highlighting details of the channel and programme currently being viewed This may take a few moments to appear Programme Guide Thu 07 06 20 18 Channels Current Event Next Event 1 BBC ONE E 2 BBC TWO cl Mary Queen of Shops 7 BBC THREE i Bust My Ass 70 CBBC Channel This Is CBBC 80 BBC NEWS 24 B BC News 105 BBG 503 ITV HD Trial No Information No Information 504 Ch4 HD Trial No information No Information 505
12. options Event details 19 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 19 02 06 2011 20 56 07 Language Selection Language Settings Using this menu you can adjust the preferred language settings Select Language from Setup menu and press OK to view this menu Press the RETURN button on the remote control to exit Language Settings Menu Preferred Audio Subtitle Teletext Guide Current Audio Subtitle A set the language used in menus a navigate MENU Exit Preferred These settings will be used if available Otherwise the current settings will be used Audio by pressing Left or Right keys change the audio language Subtitle alter the subtitle language with Left or Right keys The chosen language will be seen in subtitles Teletext changes the preferred teletext language Guide By pressing Left or Right buttons change the guide language Current Audio if audio language is supported change the audio language by pressing Left or Right buttons Subtitle if subtitle is backed up alter the subtitle language with Left or Right buttons The chosen language will be seen in subtitles 20 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 20 02 06 2011 20 56 07 Digital Settings Parental Control Menu Lock Set PIN You can view or set parental preferences of your TV Viewing Parental Control Menu Press MENU but
13. 4 21141 Hrvatska 01 653 9737 K npo 22 872 111 esk republika 323 204191 Danmark 80 88 93 38 Eesti Vabariik 69 97 800 Suomen tasavalta 0800 77 35 03 France 09 69 32 64 84 Deutschland 0431 24 89 45 50 Ortstarif abweichender Mobilfunktarif moglich Gibralter 200 76334 EMnviK 210 9554298 Magyar K zt rsas g 23 428 870 sland 00 45 80 88 93 38 Yisr el 03 953 5900 Italia 039 609 9301 Latvijas 00 372 69 97 800 Lietuvos 00 372 69 97 800 Luxembourg 00 32 2 391 01 01 Moldova 00380 443 511 317 Nederlanden 00 32 2 391 01 01 gt SUPPORT Norge 800 573 57 Polska 0717969505 PLEASE VISIT WWW TOSHIBA CO UK TV DVD SUPPORT Portugal 707 265 265 Republic of Ireland 01 246 7780 OR CONTACT THE TOSHIBA CUSTOMER Rom nia 021 3169 393 A HELPLINE ON 0844 856 0730 Poccna Degepauna 8 800 100 05 05 Slovensko 0042 323 204191 Register your TV online at Espa a 902 33 22 34 www toshiba co uk registration Sverige 0201 70 16 00 Schweiz Suisse 0900 57 58 58 CHF 1 49 Min Turkiye 0 212 340 6080 U K 0844 856 0730 YKkpa Ha 8 044 351 13 17 Please note the telephone number only applies to advanced owner s manual enquiries and not general operation of the TV eo Printed on Recycled Paper 100 Chlorine free
14. Aerial Manual Search Digital Cable Manual Search ceee Analogue Manual Search Analogue Fine Tune General Operation seeseeeieeeeeeeereeereereerenerrere Stereo and Bilingual Transmissione 17 Equalizer Only for speaker cccccceeeee 26 Displaying Subtitles 2 0 0 0 cceceeeeeeeeeeeees 17 Balance Only for Sp aker c ccccccccccesceeeeee 26 Viewing Main Menu Headphone Controlling Volume and Muting Sound 17 PATA EE SETIER E EET D ees E EET S Selecting Programme Positions 006 17 Dynamic BaSS cccccccscsseesecssesseeseesseeneeneeens 26 Channel List Sorting i Digital Qulinin tie 26 Programmes Programme Locking 18 Settings Menu Operation Conditional Access 27 Viewing Channel List Configuring Your TV s Settings c cccceee 27 Moving a Channel Viewing Settings Menu cccccccceeeeeeeteeees 27 Deleting a Channel Conditional ACCESS eccccccsssesessteteeeeeesesees 27 Renaming a Channel Language Locking a Channel ccceeeeeeeeeeeeeeneeeees PAPENAL ooocoocccccccccceccecceccecccccececceceececceccecceceececees STMT OLS icc at casts sets stent fast E N Date Time Settings cccceeceeeeeeeeeeeteeteeeeee 27 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 1 02 06 2011 20 55 51 SOUICES sania a ei i Other SettingS cceseeeeeee
15. Enter an ending time using the numeric buttons Duration Displays duration between the starting and ending time Repeat Sets a timer to be repeated as Once Daily or Weekly Use Left or Right buttons to select an option Change Delete Controls parental settings on timers Press GREEN button to save the timer Press RED button to cancel Editing a Timer Select the timer you want to edit by pressing Up or Down button When finished with editing press GREEN button to save You can press MENU button to cancel Deleting a Timer Select the timer you want to delete by pressing Up or Down button Press RED button Select YES by using Left or Right buttons to delete the timer Select NO to cancel Configuring Date Time Settings You can configure date time preferences by using this menu screen Select Date Time in the Settings menu to configure Date Time settings Press OK button Date Time Settings Date Time Time Settings Mode Time Zone i Navigate return Back CAP change Value MENU Exit Use Up or Down buttons to highlight an option Use Left or Right buttons to change a setting and press MENU to exit 28 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 28 02 06 2011 20 56 09 Source Settings Other Controls Configuring Source Settings You can enables or disable selected source options The TV will not switch to the disabled source opti
16. HDMI Device s 10 ae ee ora A SE ai a a a ea ae To Connect a DVI Device 10 ae ete iC AE AN ea aaa ar 22 Connecting a Computet ccceecceeeseeeeeeeeeees 11 TIQMUING SS vezssisceeessniciansispeasetssstesstenstrtesfrsasetatets Sharpness ii Bese eaisiaa aw kines 22 To Connect a Computet ccceeecteeeeetees 11 Colour 22 Connecting a USB Disk USB stick Col Shift Phat E A A nth pale 22 USB device USB MEMORY sssesctesseeee 11 O OUr S Mbene pippata gin erir an ina Hue NTSC only 00 eeeeceeeeeceeeeceeeseeeeeeeereeeeees 22 To Connect a USB Disk ccccccesseeeeeeeeeeee 11 USB Memory Connection GPO OUI TETP ksArirsi inienn 22 Power Save Mode be aes ie bee eae a Environmental Information 12 Resetting 93 Controlling the TV eeececceseeeeseceeeeeeeeeeeeeeeeesneeeteaaes 13 Changing Picture Format cscccsssssssssssssesseeeesee 24 SWItCHING ON seeesseseeteeeesseeeeteesseeeetteeesniee 13 Configuring PC Picture Settings ccccsssssseeeeeee 25 Using the Remote Control cseeeeeee 13 PC Picture Settings 25 Using the Controls and Connections on the TV 13 DG BeeiGinak Moi EAE a Initial Installation 14 e 5 Autoposition Auto TUNING ssssssstteeeeseeesssssnttteetteeeesssnnnnnttetttee H Position o cecssesscscssesssessesesessessvesssesstsessesees Auto TUNNO e aun ieee a V Position Manual Tuning Analogue Fine Tuning Digital
17. Or Side Audio Video Connection Cable gt JE Supplied TY m lt 0 ag w A as T m S e Audio Cable SIDE AV Input Not supplied To use a PC set the monitor output resolution on the PC before connecting it to the television To display the optimum picture use the PC setting feature NOTE Some PC models cannot be connected to this television An adaptor is not needed for computers with a compatible mini D sub15 pin terminal Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multiangle scenes Connecting a USB Disk USB stick USB device USB MEMORY To Connect a USB Disk e You can connect a USB disk to your TV by using the USB input of the TV This feature allows you to display play music photo or video files stored in a USB stick e Itis possible that certain types of USB devices e g MP3 Players may not be compatible with this TV e You may back up your files before making any connections to the TV set in order to avoid any possible data loss Note that manufacturer will not be responsible for any file damage or data loss Do not pull out USB module while playing a file CAUTION Quickly plugging and unplugging USB devices is a very hazardous operation Especially do not repeatedly quickly plug and unplug the drive This may cause physical damage to the USB p
18. TOSHIBA Leading Innovation gt gt gt 19EL833B 22EL833B DIGITAL Series gt SUPPORT Register your TV online at www toshiba co uk registration OWNER S MANUAL Contents Safety Precautions ccccceceeeeeeeeeeeeeteeeseneeeees 3 Viewing Info Banner Air Circulation 3 Electronic Programme Guide s s s Heat Damage 3 Viewing Info Banner Mains Supply 3 Electronic Programme Guide Warning 3 Language Selection ccccccceeceeeeeeeeeeeeeeeeee Do Hed Language SettingS cece eects eeeeeeeee DONON sni a dani 3 Preferred Installation and Important Information 4 Curent aaco ae dea rE E a ENa EXCLUSION CLAUSE 4 Digital Settings Parental Important safety information c cce cee 5 Control Menu Lock Set PIN essen 21 To display your LCD TV using a wall bracket 7 Viewing Parental Control Menu 00 21 The Remote Control ccccccscccessssesessesessssesesseseees 8 Satna Sara A genres tac meee aac Inserting Batteries and Effective iano re Ces Range of the Remote Control cceeeee 8 S A N ie a Connecting External Equipment cceeee 9 eae fps Git tie cet Se Net ET ae f Configuring Picture Settings Connecting an HDMI or DVI SOE f Device to the HDMI Input 00 sccesccseeseeeseeee 10 Configuring Picture Settings eee 22 To Connect an
19. Text ceceeeeeeees 35 Holding a Page ccccccesceeeeeseeeteeeeeeeeneeeees 35 To display an initial page ceeeeeeeeee 35 Appendix A PC Input Typical Display Modes 36 Appendix B AV and HDMI Signal Compatibility Input Signal Types 37 Appendix C Supported File Formats for USB Mode 38 Appendix D PIN Information ceeeeeee 38 Specifications and Accessories 0 cceee 39 License Information 06 40 Questions and ANSWETS cccccccsscceesseceesteeeees 41 T A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 2 02 06 2011 20 55 53 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but like any electrical equip ment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatur
20. W button to select a topic and press OK button To use the options press the A and W buttons on the remote control to move up and down through them and OK lt or gt buttons to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout the manual Using the Controls and Connections on the TV Using the control buttons on the side of the TV e To alter the volume press or If the volume does not change press P V AV button twice and press or again e To alter the programme position press P V AV button once and then press or button e To select an external input press and hold P V AV button until Sources list is displayed To select an external input press PIV AV repeatedly until the appropriate input source is selected NOTE The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment Please always refer to the owner s manual of the equipment to be connected for full details 13 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inaa 13 02 06 2011 20 56 04 Initial Installation Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television To set up the television use the buttons on the remote control as detailed on page 8 IMPORTANT Ensure that the aerial or
21. ar heat sources The casing and flex could be damaged by the intensity of the heat e The screen is made of glass and can break if damage is done to it Be careful when collecting sharp edged glass splitters e If you intend to wall mount the unit contact the shop where you purchased the unit for advice and leave the installation work to professionals Improper installation can cause damage and or injuries e When installing the set on a wall allow at least 10 cm clearance between the rear of the set and the wall Clearance of less than 10 cm will obstruct the vents and cause overheating to the interior of the set resulting in faults or damage to the set Taking fall prevention measures If these measures are not taken the unit can fall and cause damage and or injuries Contact the shop where you purchased the unit to obtain full details of the measures When a TV stand is used Ensure the unit is fully on the stand and placed in the centre Do not leave the stand doors open You could be hurt as a result of the unit falling or breaking or your fingers being caught or jammed Take extra precautions if you have children Avoid placing the unit on any surfaces that may be subject to vibrations or shocks To protect the unit during a thunder storm unplug the AC power cord and disconnect the aerial Caution Do not touch the aerial connector When you leave your home for a long period of time unplug t
22. at cushioned surface such as a quilt or blanket Leave the stand protruding over the edge of the surface Note Extreme care should always be taken when removing the pedestal stand to avoid damage to the LCD panel 2 Remove the two screws on the stand This will allow removal of the pedestal stand 3 Once you have removed two screws holding the pedestal stand in place remove the pedestal stand from the TV by sliding the pedestal stand away from the TV W MN i fom Py I r For 19EL833B model For 22EL833B model oy as A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 7 02 06 2011 20 55 54 The Remote Control Simple at a glance reference of your remote control Standby On mode AV Source To switch your TV to standby mode To select input from external sources Freeze Picture To freeze the picture on the screen TEXT button To call up text services in analogue broadcasts and interactive services in digital mode To select TV programme number Direct number entry SUBTITLE COI I To enable the displaying of subtitles Mono Stereo Dual I II Stereo Bilingual Transmissions 9 Analogue Digital broadcasts Audio Description ae ATVI To toggle between ATV and DTV broadcas
23. ation If a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using stands recommended by the manufacturer of the television e Only using furniture that can safely support the television e Ensuring the television is not overhanging the edge of the supporting furniture e Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and the television to a suitable support e Not standing the televisions on cloth or other materials placed between the television and supporting furniture e Educating children about the dangers of climbing on furniture to reach the television or its controls Place the TV on a stable level surface that can support the weight of the TV In order to maintain stability and prevent it from falling over secure the TV to a wall using a sturdy tie to the clip on the back of the table top stand This unit has been produced according to all current safety regulations The following safety tips should safeguard users against careless use and the dangers related to such use e Although this unit has been carefully manufactured and rigorously checked prior to leaving the factory as with all electrical appliances it is possible for problems to develop If you notice smoke an excessive build up of heat or any ot
24. by entering the 3 digit page number using the numbered buttons pressing the coloured buttons or pressing to advance to the next page and to go back to the previous page e Four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control e For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Below is a guide to the functions of the remote control text buttons Acessing Sub Pages If a text page has sub pages press and enter the sub page numbers 01 02 03 etc which can be selected using Left Right buttons at the bottom of the text page under the coloured links Revealing Concealed Text To discover the solutions on quiz and joke pages press the ED button Holding a Page At times it is convenient to hold a page of text Press E3 and HOLD will appear in the top left of the screen The page will be held on screen until the button is pressed again To display an initial page Press i to access an initial page The one displayed is dependant on the broadcaster 35 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 35 02 06 2011 20 56 11 Appendix A PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768 The following table is an illustration of some of the typical video display modes Your
25. change depending on the service provider Press MENU button and select the Settings icon by using Left or Right button Press OK button to view Settings menu Use Up or Down button to highlight Conditional Access and press OK to view menu items Timers Sets timers for selected programmes Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Timers and then press OK button to continue Setting Sleep Timer The television can be set to turn itself Off after a certain length of time Highlight Sleep Timer by using Up or Down button Use Left or Right button to set The timer can be programmed between Off and 2 00 hours 120 minutes in steps of 30 minutes Setting Programme Timers This feature will set the television to go to a specific channel at a certain time It can be used to view a particular programme or by setting the mode to daily or weekly can be used to view a series of programmes Press Down button to set timers on an event Programme timer function buttons will be displayed on the screen Adding a Timer e Press YELLOW button on the remote control to add a timer The following menu appears on the screen Channel Changes channel by using Left or Right Timer Record Type This feature is unavailable to be set Date Enter a date using the numeric buttons Start Enter a starting time using the numeric buttons End
26. commend that you do not use any pro prietary polishes or solvents on the screen or cabinet as this may cause damage Cleaning the screen and cabinet The LCD display panels are manufactured using an extreme ly high level of precision technology however sometimes Please take note The digital reception function of this television is only effective in the countries listed in the Country section during the first time installation menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous It is always advisable to reduce both the brightness and contrast settings Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines This is not a defect of the LCD TV and is not covered under the manufacturer s warranty Regular use of other size modes will prevent permanent retention EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by i fire ii earthquake iii accidental damage iv intentional misuse of the product v use of the product in impro
27. e The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For more information see a service provider IMPORTANT Insert or remove the CI module only when the TV is SWITCHED OFF e In order to watch certain digital channels a conditional access module CAM is necessary This module must be inserted in the Cl slot of your TV e Obtain the Conditional Access Module CAM and the viewing card by subscribing to a pay channel company then insert those to the TV using the following procedure e Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV 27 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 indd 27 02 06 2011 20 56 09 Setting Timers Setting Date Time e The CAM should be correctly inserted it is impossible to insert fully if reversed The CAM or the TV terminal may be damaged if the CAM is forcefully inserted Connect the TV to the mains supply switch on and then wait for few moments until the card is activated When no module is inserted No Common Interface module detected message appears on the screen e Refer to the module instruction manual for details of the settings Viewing Conditional Access Menu These menu settings may
28. e You must obtain any required permission from copyright owners to use copyright content Toshiba cannot and does not grant such permission Depending on the file size and amount in your USB storage device it may take some time for loading to view Amessage will display on screen when loading files from the USB storage device Only limited types of U3 USB device are supported Therefore it is suggested not to use U3 USB for playing Media Player e Non supported characters will be replaced with a square o Playing MP3 Files To play mp3 files from a USB disk you can use this menu screen When you select Music from the main options available music files will be filtered and listed on this screen Eel stv usb mp3 E Parent Folder m 02 Violin Concerto No 2 KV 211 2 And mp3 Be 03 Violin Concerto No 2 KV 211 3 Ron mp3 lin Concerto No 3 KV 216 1 Al mp3 jlin Concerto No 3 KV 216 2 Ada mp3 06 Violin Concerto No 3 KV 216 3 Ron mp3 07 Synfonia Concertante KV 364 1 AlLmp3 01 Violin Concerto No 2 KV 211 1 AllLmp3 09 38 jump stop ny Play this AIP Previousines sot z Use Up or Down button to highlight a file Use Numeric Buttons to jump to the previous or next file to play Use RED button to stop playback Press GREEN button to play all media files in the folder starting with the selected one Press YELLOW button to pause a playing file Use BLUE button to play the selec
29. earch Manual Search Search Type Frequency Modulation Symbol Rate Network channel scan ESE Signal quality al level Only for 40BV700G model Analogue Manual Search The television can be tuned in manually For example if the television cannot be connected to a media recorder decoder with a SCART lead or to tune in a station on another System To allocate a programme position on the television for a decoder and media recorder turn the decoder on insert a pre recorded film into the media recorder and press PLAY then manually tune Manual Search Search Type Band c TV System I Channel o Frequency 049 75 MHz Signal quality None Signal levet Dee E hange vawe RENUext After selecting search type as Manual Channel scan you can use Up or Down button to highlight an item and then press Left or Right button to set an option Enter the channel number or frequency using the numeric buttons You can then press OK button to search When the channel is located any new channels that are not on the list will be stored Analogue Fine Tune Select Analogue Fine Tune from the Installation menu by using Up or Down and OK buttons Analogue fine tune screen will be displayed Analogue Fine Tune feature will not be available if there are no analogue channels digital channels and external sources stored e Press OK button to proceed Use Left or Right button to set Fine Tune When finished p
30. eeeeee Using a Conditional Access Module Setting Timers Setting Date Time Setting Sleep Timer ceceeeeeeeeeeesteeeeetees Setting Programme Timers Configuring Date Time Settings 008 Source Settings Other Controls cce Configuring Source Settings Input Selection Configuring Other Settings General x Operation osanna aE 29 Menu Timeout Scan Encrypted Other Controls wisi seeders oad Weeds Backlight 0 c cccceeceeeeseeeeeeeeeeeeeeeeteeneeeseneeeees Power Save Mode 3 Blue Background ccceeceeeeeeeeeeeeeeeseneeeees Software Upgrade Hard of Hearing Audio DeSCription cccceeeeeeeeteeeeeeeeeeeeeee Auto TV Off eeceeceeeeresneeeeeeereeeeeeeeeeeteneeeateees Broadcast Type 3 Standby Search eesesseeereeereerrenrrnse 30 Full Mode optional ccecseeeeeeeeeeeeeeeeees 31 TXT Language HDMI True Black 0 cece eee eee eeeeeeneeeee 31 USB Media Browse ce cec eee eeeeeeeeeeeaes 32 Manual Start 32 Auto Start Playing MP3 Files Viewing JPG Files Slideshow Feature i Video Playback 34 Media Browser Settings 34 To Close the Media Player 34 Analogue Text Services 35 Analogue Text Services ccccceeeeeeeeeeeeeee 35 Using Text Button TEXT a se 35 Acessing Sub Pages 5 Revealing Concealed
31. es or humidity or locations where the temperature is likely to fall below 5 C 41 F Mains Supply The set should be operated only from a 220 240 V AC 50 Hz outlet DO ensure that the television is not standing on the mains lead DO NOT cut off the mains plug from this equipment this incorporates a special Radio Interference Filter the removal of which will impair its performance In the UK the fuse fitted in this plug is approved by ASTA or BSI to BS1362 It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Warning To prevent the spread of fire keep candles or other open flames away from this product at all times Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment Do not DON T remove any fixed cover as this may expose danger ous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers tablec
32. filtering options Press DOWN button to sort files by date e Press TEXT button to view thumbnails Slideshow Feature You can use this feature to display photos on your TV 61959_101 5025590361 5627_53990 63 KB Pase Hep WB Loop huffle AP Previous ext ue N Back to file list Press RED button to zoom picture Press GREEN button to continue with the slideshow e Press YELLOW button to pause a playing file e Press BLUE button to activate loop shuffle mode e Press Left or Right button to jump to previous or next file of slideshow e Use A or W button to rotate the picture Then it becomes to be pause mode e Press INFO button to activate the operations bar e Press RETURN to go back 33 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 33 02 06 2011 20 56 10 USB Media Browser continued This TV allows you to enjoy photo video or music files stored on a USB device Video Playback When you select Videos from Media Browser available video files will be filtered and listed on this screen You can use Up or Down button to select a video file and press OK button to play a video E Videos E Aveusb Divx_small 1x01 Parent Folder E How Met Your Mother 1x01 Pilotsrt How Met Your Mother 1x01 Pilot avi A0 Play Preview Ge O Loopsshuifle If you select a subtitle file and press OK button you can select or deselect that subt
33. he AC power cord for safety The unit becomes warm when in operation Do not place any covers or blankets on the unit in order to prevent overheating The ventilation holes should not be blocked Do not set up near radiators Do not place in direct sunshine When placing on a shelf allow at least 10 cm clearance space around the whole unit The unit shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus e Liquids spilled into the unit can cause serious damage Switch the set off and disconnect the mains power supply then consult a qualified service person before attempting to use the unit again e Moisture condensation occurs for example when you pour a cold drink into a glass on a warm day and drops of water form on the outside of the glass In the same way moisture may condense on this unit s internal optical pick up lens one of the most crucial internal parts of the unit e Moisture condensation occurs in the following situations When you move the unit from a cold place to a warm place When you use the unit in a room where the heater was just turned on When you use the unit in an area where cold air from an air conditioner directly hits the unit When you use the unit in a humid place e Never use the unit when moisture condensation may occur e Using the unit when moisture condensation exists may damage its own i
34. her unexpected phenomena you should disconnect the plug from the mains power socket immediately sbs A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inda 5 02 06 2011 20 55 54 Important safety information continued Ensure that the unit is sufficiently ventilated Never place it next to or underneath curtains e This set should only be connected to an 220 240V AC 50Hz mains power supply Do not attempt to connect it to any other type of supply The socket outlet must be installed near the equipment and is easily accessible Do not open this unit An attempt to repair the unit by a non expert could be dangerous and potentially cause a fire hazard All repairs must be carried out by qualified service personnel only Keep away from rodents Rodents and also cockatiels enjoy biting electric flexes They can cause a short circuit fire hazard and receive a fatal electric shock Always hold the plug when disconnecting the unit from the socket outlet Do not pull on flex The flex can become overloaded and cause a short circuit e Use a soft dry cloth to clean the unit Set up unit so that no one will trip over the flex e This unit is recommended to be installed on shock free benches in order to avoid any danger from falling e Take note that toddlers can pull the unit down from a table or cupboard by means of its flex Children can hurt themselves when doing this Do not use the unit ne
35. image horizontally to right hand side or left hand side of the screen In the PC POSITION menu press the Down button until H Position is highlighted e Press the Left or Right button to adjust the value V Position V Vertical Position shifts the image vertically towards the top or bottom of the screen In the PC POSITION menu press the Down button until V Position is highlighted Press the Left or Right button to adjust the value Dot Clock Dot Clock adjustment corrects the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts In the PC POSITION menu press the Down button until Dot Clock is highlighted e Press the Left or Right button to adjust the value Phase Depending on the resolution and scan frequency that you input to the TV Set you may see a hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method In the PC POSITION menu press the Down button until Phase is highlighted e Press the Left or Right button to adjust the value 25 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inda 25 02 06 2011 20 56 08 Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu Configuring Sound Settings Sound settings can be configured according to your personal preferences Press MENU button and select the
36. indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information abou
37. is unlit check that the mains plug is con nected to the power and press the button on the left side of the television to switch the television on Then the LED lights up in green If the picture does not appear press on the remote control it may take a few moments To put the television into Standby press D on the remote control To view the television press again The picture may take a few seconds to appear Note The active Standby LED may appear for a few moments when the TV is switched off For energy saving Turning the television off at its mains supply or un plugging it will cut energy use to nearly zero for all televisions This is recommended when the television is not being used for a long time e g when on holiday Reducing the brightness of the screen will reduce energy use Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills NOTE Putting the television into standby mode will reduce energy consumption but will still draw some power gt control volume buttons Remote Control Sensor Standby LED t Programme Volume AV Function Ii Standby On button Using the Remote Control Press the MENU button on the remote control to see the menus The main menu appears as a group of icons each for a menu option Press the lt or button to select a topic and press OK button In sub menu screen mode the menu appears as a list Press the A or
38. itle file Use Up or Down button to highlight a file Press OK button to start the video playback and play the selected file Press GREEN button to play all The following menu will be displayed while playing a video file How Met Your Mother 1x01 Pilot avi D x1 TEE Stop Ok Pause ii e ind B subtitle Time correction Back 00m10s 22m04s Bl romard Bry Subtitle Audio i jump e Press BLUE button to stop the video playback Press OK button to pause the video playback e Press LEFT button to go backward e Press RIGHT button to go forward e Use AD button to set subtitle Audio Use GREEN button to jump to a time Use YELLOW button to Open subtitle time correction menu Subtitle Time Correction Offset TEXT clear Dia cancel Li Note You can set subtitles by using OK button before starting the playback or by using MENU button during the playback Selected subtitles may not be displayed correctly in some cases In order to display movie subtitles correctly you should set a Movie Subtitle language See the section Movie Subtitle in Language Settings for selecting Movie Subtitle language Press RETURN button to switch back to previous menu Media Browser Settings View Style Slideshow Interval Show Subtitle Subtitle Language Subtitle Position Subtitle Font Size Flat view style displays all files in removable device Folder view style dis
39. ity level is disabled disables access to the broadcast Not available for UK Child Lock Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select parental and then press OK to continue Enter the pin number Child Lock disables the buttons on the television All buttons on the remote control can still be used Set PIN Use Up or Down buttons to select Set PIN option Press OK to display the Set PIN window e Use numeric buttons to enter new pin number You will need to input your new pin a second time for verification purposes e After typing correct PIN numbers PIN number will be changed Note The factory default pin number is 0000 if you change the pin number make sure you write it down and keep it safe 21 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inda 21 02 06 2011 20 56 07 Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu Configuring Picture Settings You can use different picture settings in detail You can customize current picture mode settings as desired For example you change items such as Brightness Contrast Colour Sharpness and Hue Press MENU button and select the Picture icon by using Left or Right button Press OK button to view Picture Settings menu Picture Settings Mode Contrast Brightness Sharpness Colour Colo
40. l search for broadcasts 02 06 2011 20 56 05 Initial Installation continued 10 The Auto tuning screen will appear and the television will start to search for available stations The progress bar will move along the line You must allow the television to complete the search Tthe following OSD will be displayed on the screen and the television will search for digital and analogue TV broadcasts take a few minutes Scanning digital channels UHF 30 SIDSA NETWORKS Sky News SIDSA NETWORKS CNBC Europe encrypted SIDSA NETWORKS TYSMONDE EUROPE encrypted SIDSA NETWORKS DW TV encrypted SIDSA_NETWORKS BBC World encrypted Channels Found MENU Cancel scan Note You can press MENU button to cancel After all the available stations are stored Channel List will be displayed on the screen If you like the sort channels according to the LCN please select Yes and then press OK if available Edit channel List 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS 24 105 BBC 503 ITV HD Trial 504 Ch HD Trial Delete OK Watch Filter e Press OK button to quit channel list and watch TV Note e Do not turn off the TV while initializing first time installation Auto Tuning Auto Tuning As new services are broadcast it will be necessary to retune the television in order to view them e Auto Tuning will completely retune the television and can be u
41. layer and especially the USB device itself USB Memory Connection e Plug your USB device to the USB input of the TV SIDE VIEW USB MEMORY 41 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 11 02 06 2011 20 56 03 Power Save Mode Environmental Information This television is designed to consume less energy to save environment e You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV To reduce energy consumption you should take the following steps e You can use Power Save Mode setting located in the Feature menu If you set Power Save Mode as On the TV will switch to energy saving mode and luminance level of TV set will be decreased to optimum level Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode Power Save Mode lt Off gt When the TV is not in use please switch off or disconnect the TV from the mains plug This will also reduce energy consumption e Disconnect power when going away for longer time e Note that annually using the TV set in Power Save Mode has more power efficiency than disconnecting the TV from the mains plug instead of keeping stand by mode Therefore it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption And also it is recommended to disconnect the TV from the mains plug t
42. loths curtains etc Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufactur ers approved stand bracket or legs with the fixings provided according to the instructions DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unat tended operation or has a standby mode Switch off by withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DON T continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen push anything into holes slots or any other openings in the case NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry
43. mber a warning screen will be displayed Select Yes if you want to move the channel and press OK Selected channel is now moved Deleting a Channel You can press GREEN button to tag untag all channels YELLOW button to tag untag channel Select the channel that you want to delete and select Delete option Press OK button to continue A warning screen will appear Select Yes to delete select No to cancel Press OK button to continue Renaming a Channel Select the channel that you want to rename and select Edit Name option Press OK button to continue Pressing Left or Right button moves to the previous next character Pressing Up or Down button changes the current character Pressing the numeric buttons 0 9 replaces the highlighted character with the characters printed above the button one by one as the button is pressed e When finished press OK button to save Press MENU to cancel Locking a Channel You can press GREEN button to tag untag all channels YELLOW button to tag untag a single channel Select the channel that you want to lock by using Up or Down buttons Select Lock option by using Left or Right buttons Press OK button to continue You will be asked to enter parental control PIN Enter the PIN number Note Default PIN is set to 0000 e Press OK button when the desired channel is highlighted to lock unlock the channel Lock symbol will be displayed next to the selected
44. n Before running first time installation any connected devices need to be set to standby mode The SPDIF Coax OUT socket enables the connection of a suitable surround sound system HDMI High Definition Multimedia Interface is for using with a DVD decoder or other equipment with digital audio and video output It is designed for best performance with 1080i and 1080p high definition video signals but will also accept and display VGA 480i 480p 576i 576p and 720p signals PC format signals will also be displayed NOTE Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly A wide variety of external equipment can be connected to the television therefore the relevant owner s manuals for all addi tional equipment must be referred to for exact instructions If the television automatically switches over to monitor external equipment return to normal television by pressing the desired programme position button To recall external equipment press button repeatedly to switch between sources 9 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 9 02 06 2011 20 55 58 Connecting an HDMI or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device This i
45. n button after setting Teletext Language option Scan Encrypted will be then highlighted You can set Scan Encrypted as Yes if you want to scan coded stations 5 Press OK button on the remote control to continue and the following message will be displayed on the screen 14 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 14 Do you want to start an automatic channel scan C Select Yes by using Left or Right buttons and press OK to continue Afterwards the following OSD will be displayed on the screen Please Select Digital Search Type cabe If you select Cable option the following screen will be displayed Automatic channel scan Retune Start Frequency iy te Stop Frequency kt Search Step 8000 kee CES Enter search trequency K Start search MENU exit You can select frequency ranges from this screen For highlighting lines you see use Up or Down button You can enter the frequency range manually by using the numeric buttons on the remote control Set Start and Stop Frequency as desired by using numeric buttons on the remote control After this operation you can set Search Step as 8000 kHz or 1000 kHz If you select 1000 kHz the TV will perform search process in a detailed way Searching duration will thus increase accordingly When finished press OK button to start automatic search If you select Aerial option from the Search Type screen the television wil
46. nal and picture format 17 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 17 02 06 2011 20 56 06 Channel List Sorting Programmes Programme Locking You can view stored channels and sort them by using the Channel List feature Viewing Channel List The channel order may be changed to suit your personal preference Select Channel List from the main menu and press OK The following menu will be displayed Channel list Active channel list Select Edit Channel List to manage all stored channels Use Up or Down and OK buttons to select Edit Channel List Edit Channel List 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS 24 105 BBCI 503 ITV HD Trial 504 Ch4 HD Trial 505 five HD Trial F aaaaaaag Edit name OK watch ETF Page uP oown 9 W Press Up or Down button for selecting a channel A P You can press P or v button to move page up or page down To watch a specific channel highlight it by using Up or Down buttons Afterwards press OK button e Press BLUE button to view filtering options e Press MENU button to exit Moving a Channel Highlight the desired channel by using Up or Down buttons Select Move option in the channel list and press OK button Edit Number screen will be displayed Enter the desired channel number by using the numeric buttons on the remote control If there is a previously stored channel on that nu
47. nditional Access Press OK to continue This setting controls conditional access modules when available Language Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select language and then press OK to continue Using this menu you can adjust the preferred language settings Configures language settings Parental Configures parental settings Timers Sets timers for selected programmes Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Timers and then press OK button to continue Date Time Settings You can configure date time preferences by using this menu screen Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Date Time and then press OK button to continue Sources Enables or disables selected source options Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Sources and then press OK button to continue Other Settings Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select other settings and then press OK to continue Using this menu you can adjust the preferred language settings Displays other setting options of the TV set Using a Conditional Access Modul
48. ng Press MENU button to cancel process In such a case located channels are not stored The television will start to search for all available stations You must allow the television to complete the search 15 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 15 02 06 2011 20 56 06 Manual Tuning Analogue Fine Tuning The television can be tuned in manually using Manual Search feature Digital Aerial Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known Select Manual Search from the Installation menu and press OK Manual Search Search Type Channel Frequency Network channel scan Signal quality Signal level After selecting search type as Digital Aerial you can enter the multiplex or frequency number using the numeric buttons and press OK button to search e Enter the multiplex number using the numeric buttons The television will automatically search for that multiplex When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated e Repeat as necessary Digital Cable Manual Search e In cable manual scan you can enter frequency modulation symbol rate and network channel scan options After selecting search type as Digital Cable you can set the desired options and press OK button to s
49. ngle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing 8 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 8 02 06 2011 20 55 57 Connecting External Equipment Before connecting any external equipment remove the mains plug from the wall socket Side View iM l It IN a D A E COMMON INTERFACE i ki E mi S lt 4 The Common Interface is E for a Conditional Access Z Module CAM ETE M eare st z o o Z 8 USB HDMI Input lt USB Input Sockets VGA Input SPDIF ANT Aerial Coaxial Out Input Aeria lt _ Controls SSS _ 5 ookoo Looto Loata a PN N Button peeeeee e i X k TPPOTIII AA lt Standby Button i 1 I SCART I lt lt SIDE AV Input I I h Headphone adecod SCART AA could be Digital A Socket Satellite Free to lt Air or any other compatible decoder decoder l Connect the aerial to the ANT socket on the rear of the television If you use a decoder or a media recorder it is essential that the scart cable is connected to the televisio
50. nput is designed to accept HDCP High Bandwidth Digital Content Protection programme material in digital form from EIA CEA 861 D compliant 1 consumer electronic devices such as a set top box or DVD player with HDMI or DVI output NOTE Some early HDMI equipment may not work properly with your latest HDMI TV Supported Audio format Linear PCM sampling rate 32 44 1 48kHz To Connect an HDMI Device Connect an HDMI cable type A connector to the HDMI ter minal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo HOM If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this mode HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration To view the HDMI device video press the button to select HDMI1 or HDMI2 AA HDMI input SE Sockets Back HDMI device To Connect a DVI Device Connect an HDMI to DVI adaptor cable HDMI type A con nector to the HDMI terminal and audio cables to the SIDE AV socket using the supplied SIDE AV connection cable s RED and WHITE inputs see illustration The recommended HDMI to DVI adaptor cable length is 6 6 ft 2m An HDMI to DVI adapto
51. nternal parts and discs Connect the power cord of the unit to the wall outlet turn on the unit remove the disc and leave it for two or three hours After two or three hours the unit will warm up and moisture will be evaporated Leaving the TV connected to the wall outlet will help prevent moisture condensation in the unit e Never place hot objects or open flame sources such as lighted candles or night lights on or close to the TV High temperatures can melt plastic and lead to fires Ge A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 6 02 06 2011 20 55 54 To display your LCD TV using a wall bracket If you decide to wall mount your LCD TV always use a wall bracket appropriate for the size and weight of the LCD TV 1 Caution Two people are required for installation 2 Unplug and remove any cables and or other component connectors from the rear of the TV 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appropriate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket 4 IMPORTANT Always use the screws supplied or recommended by the wall mount manufacturer 5 After attaching the appropriate bracket s to the wall and the back of the TV remove the pedestal stand from the TV as described below Removing the pedestal stand 1 Carefully lay the front of the TV face down on a fl
52. o save energy more when you do not use e Please helps us to save environment by following these steps e This television is designed to consume less energy Harmful substances and contents that are dangerous to health are eliminated in its design e This product is designed to endure longer and it is subject to recycling at the end of its service life When the TV reaches the end of its service life dispose the product in accordance with the proper recycling process as explained on page 40 Repair Information Please refer all servicing to qualified personnel Only qualified personnel must repair the TV Please contact your local dealer where you have purchased this TV for further information TOSHIBA gives a minimum of 2 years guarantee for this LCD TV and 7 years availability for replacement of electronic parts For warranty repairs please contact the retailer where you purchased the product 12 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 12 02 06 2011 20 56 04 Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the television Whilst all the necessary adjustments and controls for the television are made using the remote control the buttons on the left side of the television may be used for some functions COMMON INTERFACE Switching on If the standby LED
53. o the manufacturer of the source equipment 37 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 37 02 06 2011 20 56 11 Appendix C Supported File Formats for USB Mode Fie Format Remarks _________ EE ee ee ee ee eee MPEG1_ MPEG Layer 1 2 3 20Mbit sec MPEG2 MPEG2 ie ee St mPol cat MPEG2 TS EAC3 AC3 20Mbit sec vob mkv H 264 TS i MPEG4 PCM MP3 MS ISO MPEG4 PCM MP3 Support SP and ASP MJPEG 3OPsOVGA WxH 1024x768 MPEG 1 2 i Sample Rate 8k 48k Hz Music mp3 Layer 1 2 f Bit Rate 128kbps 320kbps 3 MP3 Baseline JPEG a WxH 15360x8640 Photo Progressive JPEG Appendix D PIN Information Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Signal information for Mini D sub 15 pin connector Signal name Signal name Signal name R Ground NC G Ground NC B Ground NC NC Ground NC not connected 38 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 38 02 06 2011 20 56 11 Specifications and Accessories Broadcast Systems Channels DVB T MPEG2 DVB T MPEG4 HD DVB C MPEG2 DVB C MPEG4 Video Input Stereo Nicam External Connections PAL SECAM NTSC 4 43 1 SCART 1 Input 21 pin SCART RGB A V 2 YPbPr via VGA Input Mini D Sub 15 Pin Analogue 3 FAV Input Side FAV Cable Jack Video Audio L R 4 HDMI 1 2 Inp
54. ons when amp button is pressed Source Settings SCART lt Enabled gt SIDE AV Enabled SCART S Enabled HDMI1 Enabled HDMI2 Enabled YPbPr Enabled VGA PC Enabled Select Sources in the Settings menu and press OK button e Press Up or Down buttons to select a source e Use Left or Right button to enable or disable the selected source Changes are automatically stored Input Selection Use the Input Selection window if the television does not switch over to a connected source automatically e Press button on your remote control for directly changing sources Select settings tab and then use Up or Down to select Source Press OK button Use then Up or Down button to highlight an input and press Right button to select Configuring Other Settings General You can configure the settings of your TV Select Configuration from Setup menu and press OK to view this menu Press the RETURN button on the remote control to exit To view general configuration preferences select Other Settings in the Settings menu and press OK button Other Settings 60 sec Scan Encrypted Yes Backlight Maximum Power Save Mode off Blue Background off Software upgrade V 0 2 7 Hard Of Hearing off Audio Description off Auto TV OFF 4h Digital Aerial Menu Timeout Broadcast Type Standby Search Country UK AP change value MENU Exit Operation e Press Up or Down buttons to select an item e Use Left or Right b
55. per conditions vi loss and or damage caused to the product whilst in the possession of a third party vii any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal opera tion or misuse of the product Note A Toshiba wall bracket or stand where available must be used 4 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 4 02 06 2011 20 55 53 Important safety information WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL Headphone Warning Loud music can damage your hearing irreversibly Do not set the volume to a high level when listening through headphones particularly for extended listening periods Information for the DVB T function e
56. plays files in selected folder selee a Navigate ei mmea You can set your Media Browser preferences by using the Settings dialog Press W or A button to highlight an item and use or P button to set View Style Sets default browsing mode Slide Show Interval Sets slide show interval time Show Subtitle Sets subtitle enabling preference Subtitle Language Sets supported subtitle language Subtitle Position Sets subtitle position as up or down Subtitle Font Size Sets subtitle font size max 54pt To Close the Media Player Press MENU button on the remote control 34 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 34 02 06 2011 20 56 10 Analogue Text Services This television has a multi page text memory which takes a few moments to load Analogue Text Services Before using the text services the required language region must be chosen Select Language from the SETTINGS menu e Press the Left or Right button to choose the required language region After the teletext language is selected press MENU button to exit Using Text Button TEXT e To view text services press TEXT Press TEXT again to superimpose text over a normal broadcast picture e Press TEXT again to return to normal viewing e Programmes cannot be changed until text is cancelled e The first text page shown will be the initial page e Any text page can be accessed
57. r cable transfers video only Separate analogue audio cables are required i IM SIDE AV Input si li SIDE AV f Side Audio Video Connection Cable Ka Supplied a HDMI Input Sockets i A gt Mm Audio Cable Not supplied HDMI to DVI Adapter Cable not supplied T NOTE To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures When turning on your electronic components turn on the television first and then the HDMI or DVI device When turning off your electronic components turn off the HDMI or DVI device first and then the television 10 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inaa 10 02 06 2011 20 56 00 Connecting a Computer To Connect a Computer With either an RGB PC or an HDMI connection you can watch your computer s display on the television and hear the sound from the television s speakers When connecting a PC to the VGA input on television use an analogue RGB 15 pin computer cable and use the SIDE AV socket with a PC audio cable not supplied for audio connection using the supplied SIDE AV connection cable s RED and WHITE inputs see illustration PC VGA Cable Not supplied C T VGA Input T ma back
58. r tone Hue NTSC only Press MENU button and select picture by using Left or Right button Press Up or Down to select hue Adjusts the colour value Colour Temp Colour Temperature increases the warmth or coolness of the picture by increasing the red or blue tint In the PICTURE menu press Up or Down to select Colour Temp Press Left or Right to choose from one of these options Cool Normal and Warm Note Setting Cool option gives white colours a slight blue stress Setting Warm option gives white colours a slight red stress For normal colours select Normal option 22 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 22 02 06 2011 20 56 08 Configuring Picture Settings continued Noise Reduction Press MENU button and select picture by using Left or Right button Press Up or Down to select noise reduction Sometimes some words or picture elements to become distorted or pixelated Using the Noise Reduction feature reduces this effect by smoothing out the edges Picture Zoom Press MENU button and select picture by using Left or Right button Press Up or Down to select picture zoom Sets the picture size to auto 16 9 subtitle 14 9 14 9 zoom 4 3 panoramic or cinema Resetting Press MENU button and select picture by using Left or Right button Press Up or Down to select reset and press OK This feature allows you to reset the current Picture Setting
59. ress Left or Right button to select Volume Press Right button to increase headphone volume level Press Left button to decrease headphone volume level Headphone volume level can be adjusted between 0 and 63 AVL Sometimes there can be large changes in volume when switching from a DTV 5 1ch to a DTV 2ch an ATV channel or an external input Using the AVL feature reduces these volume differences In the SOUND menu press Up or Down to highlight AVL Press Left or Right button to set AVL as On or Off Dynamic Bass Dynamic Bass is used to increase bass effect of the TV set Digital Out Select Digital Out using Up or Down button and then use Left or Right button 26 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 26 02 06 2011 20 56 08 Settings Menu Operation Conditional Access Configuring Your TV s Settings Detailed settings can be configured to suit your personal preferences Viewing Settings Menu Press MENU button and select Settings icon by using Left or Right button Press OK button to view Settings menu g Settings Language Parental Timers Date Time Sources Other Settings Operating Settings Menu Items e Press Up or Down button to highlight a menu item e Press OK button to select an item e Press MENU button to exit Conditional Access Select Setting from the main menu by using Left or Right button and press OK Afterwards use Up or Down button to set Co
60. ress OK Select HDMI True Black using Up or Down buttons and use Left or Right to set You can use this feature to enhance blackness in the picture You can set this feature as On for activating HDMI True Black mode Note HDMI True Black On Off feature functions only when the HDMI device output is set to RGB 31 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 31 02 06 2011 20 56 09 USB Media Browser This TV allows you to enjoy photo video or music files stored on a USB device Manual Start e To display Media Browser window you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button Press OK button to continue Media Browser menu contents depending on the contents of your USB drive will be displayed Auto Start When you plug a USB device the following menu will be displayed Th Media Browser You can play music picture files from a USB memory stick To display ALL files in a list select SETTINGS tab and change View Style to Flat Then go back to main media browser screen and you will see that now ALL tab will be available Select ALL tab and press OK Note Some USB compliant devices may not be supported If the USB stick is not recognized after power off on or First Time Installation first plug the USB device out and power off on the TV set Plug the USB device in again Do not use a USB Hub
61. ress OK button again 16 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 16 02 06 2011 20 56 06 General Operation Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time posi tions are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press CDI I to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word Dual will be displayed Choose the required programme number and if the word Dual appears press CDI I to select Dual 1 Dual 2 or Mono Displaying Subtitles In digital broadcasts this feature will show subtitles on the screen in the selected language provided they are being broadcast e Press SUBTITLE button to activate available subtitles Press SUBTITLE button again to turn off subtitles Viewing Main Menu Press MENU button on the remote control to view main menu Controlling Volume and Muting Sound Volume Press 4 or to adjust the volume Sound Mute Press X once to turn the sound off and again to cancel Selecting Programme Positions To select a programme position use the numeric buttons on the remote control Programme positions een P can also be selected using P and v Press i to display the on screen information i e programme position stereo mono sig
62. rs settings and then press OK Select Hard of Hearing using Up or Down buttons and use Left or Right to set If the broadcaster enables any special signal concerning the audio you can set this setting as On to receive such signals Audio Description Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Audio Description using Up or Down buttons Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and sometimes during dialogue if deemed necessary You can use this feature only if the broadcaster supports that additional narration track Auto TV Off Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Auto TV Off using Up or Down buttons You can set the timeout value of auto off feature After the timeout value is reached and the TV is not operated for selected time the TV will go off Broadcast Type Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Broadcast Type using Up or Down but
63. s to the default values 23 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 23 02 06 2011 20 56 08 Changing Picture Format Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Press the QUICK button and select Picture Zoom Press OK repeatedly to select between auto 16 9 subtitle 14 9 14 9 zoom 4 3 panoramic or cinema When Auto is selected the format being displayed is determined by the picture being broadcast Note Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws Use this setting when watching a widescreen DVD widescreen video tape or a 16 9 broadcast when available Due to the range of widescreen formats 16 9 14 9 etc black bars may be visible on the top and bottom of the screen When subtitles are included on a letterbox format broadcast this setting will raise the picture to ensure that all the text is displayed This zooms up the wide picture 14 9 aspect ratio to the upper and lower limits of the screen This option zooms to the 14 9 picture Use this setting to view a true 4 3 broadcast This stretches the left and right sides of a normal picture 4 3 aspect ratio to fill the screen without making the picture appear unnatural The top and bottom of the picture
64. sed to update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new services are added All current channels and settings i e locked channels will be lost e Press MENU button on the remote control and select Install and Retune by using Left or Right button Press OK button and the following menu screen will be displayed Install and Retune Automatic channel scan Retune Manual channel scan Network channel scan First time installation Select Automatic Channel Scan by using Up or Down button and press OK button Automatic Channel Scan options will be displayed You can select Digital Aerial Analogue or Digital Aerial Analogue tuning using Up or Down and OK buttons Auto Channel Scan Menu Operation Digital Aerial Searches and stores aerial DVB stations Digital Cable Searches and stores cable DVB stations Analogue Searches and stores analogue stations Digital Aerial amp Analogue Searches and stores both analogue and aerial DVB stations Digital Cable amp Analogue Searches and stores both analogue and cable DVB stations Whenever you select an automatic search type and press OK button a confirmation screen will appear on the screen To start installation process select Yes to cancel select No by using Left or Right and OK button e After auto channel scan type is set and selected and confirmed installation process will start and progress bar will move alo
65. t the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product Hg Cd PB In conformity with the EEE Regulation 40 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 40 02 06 2011 20 56 12 Questions and Q Why is there no sound or picture Check the television is not in standby mode Check the mains plug and all mains connections Why is there a picture but no sound Check the volume has not been turned down or that sound mute has not been selected What can cause a poor picture Interference or a weak signal Try a different television station Why doesn t the video DVD being played show on screen Make sure the VCR or DVD player is connected to the television as illustrated in the beginning for then select the correct input by pressing Why is the VCR DVD picture in black and white Check the correct input has been chosen Why is there a good video picture but no sound Check the SCART lead connection Why doesn t the remote control work Check the batteries aren t dead or inserted incorrectly 41 Q Q Q Q Q A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 41 Below are the answers to some of the most common queries For more information go to www toshiba co uk Why don t the controls of the television work Check that CHILD LOCK is not selected
66. ted file repeatedly or in shuffle mode e Press i button to display filtering options Press DOWN button to sort files by Title Artist or Album e Press OK to play the selected file Use Left or Right button to jump previous or next file 32 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inda 32 02 06 2011 20 56 10 USB Media Browser continued This TV allows you to enjoy photo video or music files stored on a USB device Viewing JPG Files To view photo files from a USB disk you can use this menu screen When you select Photos from Media Browser available image files will be filtered and listed on this screen C Media Browser hhas xavi T Parent Folder 0002 EB 148262_1562642699501_1038334075 0003 149101_1534763682543_1058334075 149101_1534763802546_1058334075 149681_1534760722469_1038334075 149806_1534774562815 1038334075 155190_1534732001751_1038334075 1jpg l CI B Loop shuttte EE Navigate TEXT Thumbnails If you select a subtitle file and press OK button you can select or deselect that subtitle file The following menu will be displayed while playing a video file e Use Numeric Buttons to jump to the previous or next file Press OK to play e Press OK button to view the selected picture in full screen e Press GREEN button to start a slideshow e Press BLUE button to activate loop shuffle e Press INFO button to display
67. ton and select the Settings by using Left or Right button Press OK button to view Settings menu Use Up or Down button to highlight Parental and press OK to continue Enter PIN e A dialogue box asking for the lock key will be displayed The default key is set to 0000 Enter the PIN e If itis incorrect Wrong PIN OSD will be displayed If it is correct the Parental Control menu will be displayed Parental Settings Menu lock Maturity Lock Child Lock Set PIN FA Select Setting CP change Value Back MENU Exit Menu Lock In Menu lock you can set locking for All menus or the Installation Menu to restrict access to these menus If the menu lock is disabled there will be free access to the menu system e Use Up or Down buttons to go to Menu Lock option Use Left or Right buttons to choose Menu Lock Mode DISABLED All menus are unlocked ALL MENUS All Menus are accessible only with the correct lock key So the user cannot add delete rename channels cannot set timers INSTALLATION MENU Installation menu is locked So the user can t add channels Changes will be updated after exiting Configuration Menu Maturity Lock Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select parental and then press OK to continue Enter the pin number When set this option gets the maturity information from the broadcast and if this matur
68. tons and use Left or Right to set When you set the desired broadcast type by using Left or Right button the TV will display the related channel list Standby Search This setting is visible only when the Country option is set to Denmark Sweden Norway or Finland Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Standby Search using Up or Down buttons and use Left or Right to set 30 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inaa 30 02 06 2011 20 56 09 Other Controls continued If the Standby Search is set to to on and the TV is in standby mode the TV will look for any changes in the saved channels Full Mode optional If you connect a device via HDMI or YPbPr connectors and set 1080i 1080p resolutions Full Mode item will be visible TXT Language Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select TXT Language using Up or Down buttons and use Left or Right to set Use this setting to set a preferred TXT Language HDMI True Black While watching from HDMI source this feature will be visible in the Picture Settings menu Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then p
69. ts Info IN TV Mode To display on screen information IN Text Mode To access index page To change channels To move up down between the channels To mute the sound Press once to mute sound Press n again to disable mute mode To alter the volume For changing volume setting level i Quick Settings 2 To display quick access menu Programme guide To display the programme guide Exit To exit menu screen Return To return to the previous level MENU On Off i of the on screen menu To display the on screen menu wo Navigation Buttons To move up down left or right Teletext Controls in the on screen menu General teletext mode functions Reveal To reveal the hidden information on a page No function TOSHIBA Hold CT 90326 To hold a wanted teletext page Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round Suitable battery types for this remote are AAA IEC R03 1 5V Do not combine a used old battery with a new one or mix battery types Remove dead bat teries immediately to prevent acid from leaking into the battery compartment Dispose of them in a designated disposal area Warning Batteries must not be exposed to excessive heat such as sunshine fire or the like The performance of the remote control will deteriorate beyond a distance of five metres or outside an a
70. ur Shift Colour Temp Noise Reduction Picture Zoom Operating Picture Settings Menu Items e Press Up or Down button to highlight a menu item Use Left or Right button to set an item e Press MENU button to exit Picture Mode Press MENU button and select picture by using Left or Right button Press Up or Down to select mode This television offers the choice of personalising the picture style Cinema Game Dynamic and Natural are preset options and affect settings within the television Inthe Picture Settings menu press Up or Down to select Mode Press Left or Right to select the picture mode you prefer Contrast Press MENU button and select picture by using Left or Right button Press Up or Down to select contrast Sets the lightness and darkness values of the screen Brightness Press MENU button and select picture by using Left or Right button Press Up or Down to select brightness Sets the brightness value for the screen Sharpness Press MENU button and select picture by using Left or Right button Press Up or Down to select sharpness Sets the sharpness value for the objects displayed on the screen Colour Press MENU button and select picture by using Left or Right button Press Up or Down to select colour Sets the colour value adjusting the colors Colour Shift Press MENU button and select picture by using Left or Right button Press Up or Down to select colour shift Adjust the desired colou
71. ur subscription needs upgrading Contact your service provider Q Q Why when digital subtitles have been selected are they not showing on screen Subtitles are not currently being transmitted by the broadcaster Why is the soundtrack in English when a different audio language has been selected The programme is currently being broadcast with an English soundtrack only Why dees the active standby LED sometimes take longer to go out When put into standby the television s active standby will automatically search all available channels for downloads provided Automatic Download is enabled The time it takes to do this may vary EU Conformity Statement This product is marked with CE and complies therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC and the EMC Directive 2004 108 EC Responsible for CE marking is TOSHIBA INFORMATION SYSTEMS U K LTD Toshiba Court Weybridge Business Park Addlestone Road Weybridge Surrey KT15 2UL United Kingdom 42 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inaa 42 02 06 2011 20 56 12 If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner s manual Helpline number from the numbers shown below Country name locally Contact Number Osterreich 01 97021 540 Belgique Belgie 02 391 01 01 Bbarapna 029
72. ut HDMI RGB Range supported 5 PC Input Mini D Sub 15 Pin Analogue RGB Signal 6 Digital Audio Output S PDIF Coaxial USB Port Media Browser Interface Version USB 2 0 USB Class Mass Storage File System FAT32 Headphone Socket 3 5mm stereo Operating Conditions Supplied Accessories Temperature 5 C 35 C 41 F 94 F Humidity 20 80 non condensing Remote Control 2 batteries AAA IEC RO3 1 5V Side AV Connection Cable P Clip 19 22 Visible Screen Size approx 19 47cm 22 55cm Display 16 9 16 9 Sound Output at 10 distortion 2x2 5 2x2 5 Annual Power Consumption approx 24 kWh 39 4 kWh Power Consumption Model approx 40W 45W Standby Power Consumption approx 0 3 W 0 3 W On mode Power Consumption approx 16 4 W Weight TV with stand 4 5 Gross weigh 6 5 TV without stand D Unit Dimensions Approximate 1 bee gt VESA Compliant for Simple Optional Wall Mounting 19 EL833 22 EL833 39 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224 1 007436 inad 39 02 06 2011 20 56 11 License Information HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries DVB is a registered trademark of the DVB Project
73. utton to set an option e Press OK button to view a sub menu Menu Timeout Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Other Settings and then press OK button Select Menu Timeout using Up or Down button and use Left or Right button to set a specific display timeout for menu screens Scan Encrypted Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Scan Encrypted using Up or Down buttons and use Left or Right to set When this setting is on search process will locate the encrypted channels as well If it is set as OFF manually encrypted channels will not be located while in automatic search or manual search Scan Encrypted Channel feature will always be ON after performing first time installation 29 A01_MB60_ GB _ IB_INTERNET _DVB TC_ CT90326 _10071224_1 007436 inad 29 02 06 2011 20 56 09 Other Controls Backlight Press MENU button and select settings by using Left or Right button Press OK to continue Use Up or Down to select others settings and then press OK Select Backlight using Up or Down buttons and use Left or Right to set This setting controls the backlight level Note Backlight adjustment is not available when Power Save mode is switched ON Please see page 12 of this manual for explanation Power Save Mode

Toshiba 19EL833

Contents

Download Pdf Manuals

Related Search

Related Contents