Rio Scanning Laser X60
Contents
1. e For your safety if the wand is not positioned correctly on the skin surface for treatment the white and orange lights will flash alternately and operation of the laser will be disabled e Sometimes you can smell faint burning or even see a very small line of smoke as the hair is treated e Successfully treated hairs do not always fall out immediately but are shed over time as they are released from the hair follicle light rubbing can encourage this e You may feel a pin prick sensation during treatment Any localised redness after treatment is caused by the destruction of the hair follicles and is quite normal If any redness remains after 24 hours this would indicate the power level selected was too high for your skin type Please refer to the Patch Test section in the Information Guide Any longer lasting redness will also disappear STEP 8 Turn the Keyswitch anticlockwise to lock the unit Remove the Key to a safe place away from children Note If you experience unexpected behaviour of this product then it is possible some external electromagnetic interference is responsible e g electric motors loudspeakers etc You should remove this source and restart the product to restore full operation At no time will the laser fire unintentionally SINGLE HAIR TREATMENT You can opt to treat single hairs using the SINGLE mode Press the SINGLE button once The SINGLE button will illuminate blue Th2. light around the button will fully illuminate The orange light on the wand will illuminate Alternatively press the x20 SCAN button once STEP 6 Place the wand on the skin over the area you wish to treat ensuring the Touch Pins are in contact with the skin The orange light will turn OFF and the white ready light will turn ON The blue lights around the SCAN button will rotate to indicate treatment is ready to start STEP 7 Press and HOLD the Laser Button on the top of the wand to start laser treatment The white light will flash on and off to indicate laser treatment is in progress and the unit will beep repeatedly this can be muted You will not be able to see the laser You may feel individual hairs being treated which is like a mild pin prick and a slight warming of the area being treated When the laser treatment ceases the orange light will come back on You can now move onto the next area of hairs to be treated When moving the wand to the next area of hairs to be treated the Touch Pins must be removed briefly from the skin Refer to scan modes in treatment area section IMPORTANT NOTES please read carefully e Do NOT move the wand during treatment You may notice the wand becomes warm during use this is quite normal e If contact is lost between the Touch Pins and skin during treatment the wand s orange light will come on Treatment will resume when contact is made again
3. Indicator Hand held Wand Front Face Laser Button TREATMENT AREA SCAN modes sequentially target single hairs in each treatment x60 SCAN mode Overlap by a third treatment area indentation mark Overlap by half treatment area indentation mark As a guide to the treatment area a small indentation mark will be left by pressing the Wand down on the skin In x60 SCAN mode overlapping the indentation mark slightly when moving the Wand in each direction will ensure effective coverage In x20 SCAN mode overlap the indentation mark by half SINGLE mode treatment area indentation mark SINGLE mode is for treating individual hairs The treatment area is in the centre of the indentation guide and measures 1mm x 1mm PATCH TEST IMPORTANT 24 hours before treatment it is very important to do a patch test The patch test will confirm the maximum power level for your skin type Each area to be treated must be checked as skin colour can vary Please refer to the PATCH TEST section in the Information Guide and on the DVD for instructions A slight redness may occur but not always within an hour of treatment This localised redness is caused by the destruction of the hair follicles and is quite normal However if any redness remains after 24 hours this would indicate the power level selected was too high for your skin type GETTING STARTED Please ensure you read the Information Guide and understand the Warni
4. SALON LASER SCANNING HAIR REMOVER x60 LAHC5 808nm wavelength AN Wearing laser safety goggles is unnecessary as the product has This product MUST be used responsibly Please read these Instructions carefully been designed before use with inbuilt safety features Refer to your Information Guide for e WARNINGS e SECURITY BUTTON SEQUENCE e HOW DO LASERS WORK e SUITABLE SKIN TYPES LASER SAFE WIE G al NL to fe i PATENTS PENDING e PATCH TEST e HAIR GROWTH CYCLE e WHY IS A SERIES OF TREATMENTS CLASS REQUIRED SS 1 LASER PRODUCT e YOUR QUESTIONS ANSWERED Ba TROUBLESHOOTING 1 IN LAHC5 UK 1 2 NZ 7N instructions WARNINGS e Read all instructions thoroughly and retain for future reference e Not suitable for Afro Caribbean black skin complexions or for Grey Hair See Suitable Skin Types in Information Guide e Laser hair removal should not cause discomfort you may feel individual hairs being treated which is like a mild pin prick and a slight warming of the area If you feel any discomfort or soreness the setting may be too high e Inbuilt safety features protect the eye being exposed to the laser however never aim the Wand at or near eyes e Do NOT use near flammable materials e Keep the product out of reach of children and pets Reflection Hazard Please remove all jewellery in the vicinity of the treatment area before use When not in use store the key responsibl
5. e orange light on the Wand will illuminate Follow the same procedure for SCAN treatment from Step 6 but this time pressing the SINGLE button In SINGLE mode the blue light around the SINGLE button will flash Refer to Treatment Area section SINGLE mode ADDITIONAL INFORMATION Press the MUTE button on the back of the Unit to turn ey MUME off the Beep noises Press again to turn back on Note This doesn t turn off warning bleeps resetting after lockout If you experience a lockout as indicated by repeated flashing of any of the blue power lights simply reset by turning the unit off using the key waiting 5 seconds and turning the unit on again cleaning laser aperture Periodically check whether there are any smoke deposits on the Laser Aperture A build up of deposits will affect the efficiency of the laser If you al notice any deposits switch the unit OFF and unplug the mains adapter Then simply clean with a lint free cloth or cotton bud ensuring no fibres are left in the Laser Aperture laser aperture Rio Dezac Salon Laser Scanning Hair Remover x60 and Laser Safe Technology are trademarks of The Dezac Group Ltd The Dezac Group Ltd 201 1anufactured by The Dezac Group Ltd PO Box 17 Cheltenham England GL53 7ET
6. ngs and Product Safety sections before proceeding e Shave the area to be treated This ensures that the laser goes directly to the hair root and avoids hair burning on the surface e Remove all jewellery in the vicinity of the treatment area e Please ensure you have patch tested the area to be treated 24 hours prior to treatment STEP 1 Connect Mains Adapter into the DC Power Socket at the back of the unit and plug into the Mains STEP 2 Unlock with Key to turn on The light around the Keyswitch will flash green STEP 3 BUTTON You will find the Security Button Sequence in the SEQUENCE Information Guide The green light around the Keyswitch will fully illuminate The lights around the x60 SCAN x20 SCAN and SINGLE buttons will flash blue ready for selection The bottom Power Level Indicator light will illuminate STEP 4 Use the buttons to select the correct power level for your skin type Refer to the Patch Test section of the Information Guide for skin types Each time the power setting is adjusted you will need to reselect x60 SCAN x20 SCAN or SINGLE mode to continue Note If no buttons are pressed after 20 minutes the Unit will enter energy saving mode The orange light will flash and power level 1 will remain on To restart turn key off and back on again and start at Step 3 LASER HAIR TREATMENT SCAN HAIR TREATMENT STEP 5 Press the x60 SCAN button once The blue
7. y in a safe place away from children Do not treat the same hair repeatedly in any one session Do not use after drinking alcohol or if you are feeling unwell or fatigued Do not treat the following areas tattoos permanent make up pimples warts hair on black spots or moles dark freckles skin disease birth marks burns lips nipples genital or anal areas eczema eyelashes eyebrows near the eyes nasal or ear hair This is a sensitive laser scanning product Care should be taken to avoid damage to the mechanism in the Wand This appliance is not intended for use by persons with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety PRECAUTIONS e Do NOT dismantle or repair If you have any problems using the product contact our Customer Care Department e Misuse of the unit can cause harm e Do NOT override any safety features or open the unit or wand e Only use this product with the Mains Adapter supplied e Keep Wand away from strong electromagnetic fields and magnets during use COMPONENTS Mains Adapter Power Increase Button n Orange Light Keys Power Decrease Button o White Light DC Power Socket i x60 SCAN button Touch Pins Mute Button j x20 SCAN button Laser Aperture Keyswitch SINGLE button Indentation Guide Power Level
Download Pdf Manuals
Related Search