Home

Manhattan 150965

image

Contents

1. SATA 3 GB S RAID PCI EXPRESS CARD USER MANUAL MODELS 150965 amp 160377 Model 150965 Model 160377 TM MANHATT MAN 150965 160377 UM 1006 05 Thank you for purchasing the MANHATTAN SATA 3 Gb s RAID PCI Express Card Model 150965 2 external ports or 160377 2 internal ports This card lets you upgrade a desktop computer with two SATA 3 Gb s channels to access external eSATA storage devices helping you to fully utilize the speed and versatility of eSATA to directly connect eSATA storage devices a port multiplier or eSATA enclosure By following the instructions in this user manual or the simpler setup procedure in the printed quick install guide included with the product you ll soon be enjoying these additional features Supports 1 lane 2 5 Gbps PCI Express SATA transfer rate of 3 0 Gbps and RAID 5 data transfer rates e Provides RAID 5 distributed parity RAID JBOD RAID 0 striping RAID 1 mirroring RAID 0 1 mirrored striping e Native Command Queuing NCQ and Legacy Command Queuing LCQ support maximizes drive efficiency and reduces latency Supports FlS based switching with port multipliers e Includes low profile PCI bracket e Plug and Play installation hot swappable Windows and Mac compatible e Lifetime Warranty For a complete list of country specific warranties go to www manhattan products com warranty Package Contents e SATA 3 Gb s PCI Express Card e Low pr
2. Adding to an Existing Windows Installation 1 2 o O Turn the system off Connect the hard drives to the PCI Express Card and position the card in a PCI Express slot Turn the system back on During the O S bootup Windows will display the Found New Hardware Wizard screen Click Next Select Search for a suitable driver for my device Recommended and click Next Insert the driver CD in your CD ROM DVD drive check Specify a location uncheck the other boxes click Next type in E or whatever designates your CD ROM DVD Click Browse Select a location e g E SATA PCle Raid5 2Port Sil3132 Windows Driver Click Open then OK When the wizard indicates that it found a driver for the device click Next If the Digital Signature Not Found message appears click Yes to continue installing the driver The wizard will now copy the required files to the system and start the driver When the wizard displays a completion screen click Finish to exit Verifying Installation with Windows 1 2 Right click on My Computer select Properties click the Hardware tab click Device Manager Double click SCSI and RAID Controllers If there is no yellow or in 2 MANHATTAN front of Silicon Image Sil 3132 SoftRaid5 Controller the driver has been installed correctly 3 For i
3. so this will prohibit the RAID set from being either created or rebuilt In order for the RAID set to function properly this old metadata must first be overwritten with the new metadata To resolve this select Resolve Conflicts The correct metadata including the correct drive connection information will be written to the replacement disk ni 2 MANHATTAN DRIVER INSTALLATION Fresh Initial Windows Installation 1 2 o Ql Turn the system off Connect the hard drives to the PCI Express Card and position the card in a PCI Express slot Turn the system back on Insert your Windows CD in the CD ROM DVD drive Press lt F6 gt for third party SCSI or driver installation at the beginning of text mode installation Press lt S gt when setup asks if you want to specify an additional device and insert the driver CD Press lt Enter gt and select EXA SATA PCle_Raid5_2Port Sil3132 Windows Driver where E designates your CD ROM DVD Press lt Enter gt to continue with text mode setup Follow the setup instructions to select your choice for partition and file system After setup examines your disks it will copy files to Windows installation folders and restart the system The setup program will continue and finish the installation after the restart Once Windows finishes installing devices regional settings networking settings components and the final set of tasks reboot the system if required
4. a casa vendedora indispensable el sello y fecha de compra donde lo adquiri o bien la factura o ticket de compra original donde se mencione claramente el modelo numero de serie cuando aplique y fecha de adquisici n Esta garantia no es val da en los siguientes casos Si el producto se hubiese utilizado en condiciones distintas a las normales si el producto no ha sido operado conforme a los instructivos de uso si el producto ha sido alterado o tratado de ser reparado por el consumidor terceras personas 2 MANHATTAN REGULATORY STATEMENTS FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of Federal Communications Commission FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between th
5. e equipment and the receiver e Connect the equipment to an outlet on a circuit different from the receiver e Consult the dealer or an experienced radio TV technician for help CE R amp TTE ENGLISH This device complies with the requirements of the R amp TTE Directive 1999 5 EC DEUTSCH Dieses Ger t enspricht der Direktive R amp TTE Direktive 1999 5 EC ESPA OL Este dispositivo cumple con los requerimientos de la Directiva R amp TTE 1999 5 EC FRANCAIS Cet appareil satisfait aux exigences de la directive R amp TTE 1999 5 CE POLSKI Urzadzenie spetnia wymagania dyrektywy R amp TTE 1999 5 EC ITALIANO Questo dispositivo conforme alla Direttiva 1999 5 EC R amp TTE C FE 2 MANHATTAN 2A MANHATTAN BRINGING COMPUTERS LIFE Copyright O MANHATTAN
6. ges multiple disk drives to enhance l O performance and provide redundancy in order to withstand the failure of any individual member without loss of data Disk Striping RAID 0 Striping is a performance oriented non redundant data mapping technique While Striping is discussed as a RAID set type it is actually does not provide fault tolerance With modern SATA bus mastering technology multiple I O operations can be done in parallel enhancing performance Striping arrays use multiple disks to form a larger virtual disk Disk Mirroring RAID 1 Disk mirroring creates an identical twin for a selected disk by having the data simultaneously written to two disks This redundancy provides instantaneous protection from a single disk failure If a read failure occurs on one drive the system reads the data from the other drive 2 MANHATTAN Mirrored Striping RAID 0 1 or RAID 10 A Mirrored Striping Set does just what it says combining both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that come from Mirroring When data is written to a Mirrored Striped set instead of creating just one virtual disk as Striping would do a second Mirrored virtual disk is created as well Parity RAID RAID 0 Parity or RAID 5 adds fault tolerance to Disk Striping by including parity information with the data Parity RAID dedicates the equivalent of one di
7. nformation about the devices attached to the card use the SilCfg utility and select a device from the list Updating an Existing Driver in Windows 1 Right click on My Computer select Properties click the Hardware tab click Device Manager Then click SCSI and RAID Controller and right click Silicon Image Sil 3132 SoftRaid5 Controller 2 Click Driver then Update Driver select Search for a suitable driver for my device Recommended 3 Insert the driver CD Press lt Enter gt and select EA SATA PCle_Raid5_2Port Sil3132Windows Driver where E designates your CD ROM DVD Click Next to complete the driver installation 4 The system will go through the enumeration process and install the driver At the end of the process click Yes to reboot your system if necessary Mac Installation When using the card as a non bootable adapter on a Mac refer to the Mac drivers in the Mac OS folder on the included driver CD EN 2 MANHATTAN SPECIFICATIONS Standards and Certifications e FCC e CE e SATA 1 0 e RoHS e WEEE Port Specifications e Type Model 150965 2 eSATA extermal l type Model 160377 2 SATA intermal L type e Transfer rate 3 0 Gbps Supports 2 independent SATA channels General e 48 bit Large Block Addressing e 2 pin header for LED connection Supports 1 lane 2 5 Gbps PCI Express e Hot plug capability e Independent link trans
8. ng a Spare Drive As BIOS boots press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility Select Create RAID set Press lt Enter gt Select Spare Drive Press lt Enter gt Select Spare Drives Press lt Enter gt Select the RAID size Press lt Enter gt Press lt Y gt to save your settings Deleting RAID Sets 1 As BIOS boots press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility 2 Select Create RAID set Press lt Enter gt 3 Press lt Y gt to remove the RAID set If the RAID set being deleted is a Striped set then all of the data will be lost If the set being deleted is a Mirrored set then the data will remain intact and accessible on both drives Rebuilding Mirrored Sets RAID 1 1 After replacing the failed hard drives boot up BIOS then press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility 2 Select Rebuild RAID 1 set Press lt Enter 3 Select Rebuild Hard Drive Press lt Enter 4 Press lt Y gt to rebuild the Mirrored set of the hard drive oR ND O Resolving Conflict When a RAID set is created the metadata written to the disk includes drive connection information Primary and Secondary If after a disk failure the replacement disk was previously part of a RAID set or used in another system it may have conflicting metadata specifically in reference to the drive connection information If
9. ofile and standard brackets e Driver CD with user manual e Quick install guide System Requirements e Windows 2000 XP 2003 Vista 2008 7 or Mac OS X v10 4 9 and higher e Available PCI Express Card slot e CD ROM drive 2 MANHATTAN INTRODUCTION Before you install this card it s recommended that you become familiar with the contents of the SATA RAID 5 manual on the enclosed driver CD in the folder SATA PCle_Raid5_2Port Sil3132 Windows Gui or Raid5 SATA2_4Port Sil3124 Windows Gui This RAID manual has more information about RAID architecture features installation and settings plus management software for RAID 5 GUI graphical user interface After driver installation if desired install SATA RAID 5 GUI for RAID management First however remove any existing and possibily conflicting SATA RAID GUI or Java SATA RAID GUI to ensure your new SATA RAID 5 GUI can work properly Start Control Panel Add or Remove Programs Select all SATARaid Remove RAID sets can be created and managed by either the BIOS utility setting or the SATA RAID 5 GUI setting under Windows For RAID building the BIOS utility allows random creation GUI just supports the building by sequential SATA Port1 Port2 etc What Is RAID The brief definitions below present the basic concept As mentioned above further details are available on the RAID specific manual on the enclosed CD RAID Redundant Array of Independent Disks RAID technology mana
10. port and data FIFO e Independent command fetch scatter gather and command execution e Supports legacy command queuing LCQ native command queuing NCQ non zero offsets NCQ out of order data delivery NCQ and FIS based switching with port multipliers 31 commands and scatter gather tables per port Physical e Dimensions Model 150965 2 2 x 12 2 x 9 4 cm 0 85 x 4 8 x 3 7 in Model 160377 2 2 x 12 2 x 6 8 cm 0 85 x 4 8 x 2 6 in e Weight Model 150965 42 5 g 1 5 oz Model 160377 39 6 g 1 4 oz System Requirements e Windows 2000 XP 2003 Vista 2008 7 or Mac OS X v10 4 9 and higher e Available PCI Express Card slot e CD ROM drive 2 MANHATTAN EN WARRANTY INFORMATION ENGLISH For warranty information go to www manhattan products com warranty DEUTSCHI Garantieinformationen finden Sie unter www manhattan products com warranty ESPA OL Si desea obtener informaci n sobre la garant a visite www manhattan products com warranty FRANCAIS Pour consulter les informations sur la garantie visitez www manhattan products com warranty POLSKI Informacje dotyczace gwarancji znajduja sie na stronie www manhattan products com warranty ITALIANO Per informazioni sulla garanzia accedere a www manhattan products com warranty EN M XICO Poliza de Garantia MANHATTAN Datos del importador y responsable ante el consumidor IC Intracom M xico S A de C V Av Interceptor Poniente 73 Col Parque Indust
11. reate RAID set Press lt Enter gt Select RAID 0 Press lt Enter gt Select the number of hard drives Press lt Enter gt Select the RAID size Press lt Enter gt Press lt Y gt to save your settings Press lt CTRL gt lt E gt then press lt Y gt to exit the setup Continue with conventional Fdisk and Format steps as if you were installing a conventional hard drive Your RAID configuration is complete Proceed to Driver Installation Creating Mirrored Sets RAID 1 NOOR WD a As BIOS boots press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility Select Create RAID set Press lt Enter gt Select RAID 1 Press lt Enter gt Select Auto Configuration Press lt Enter gt Press lt Y gt to save your settings Press lt CTRL gt lt E gt then press lt Y gt to exit the setup Continue with conventional Fdisk and Format steps as if you were installing a conventional hard drive Your RAID configuration is complete Proceed to Driver Installation 2 MANHATTAN Creating JBOD Sets As BIOS boots press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility Select Create RAID set Press lt Enter gt Select JBOD Single Press lt Enter gt Select JBOD Drives Press lt Enter gt Select the RAID size Press lt Enter gt 6 Press lt Y gt to save your settings O amp ND Creati
12. rial La Joya Cuautitlan Izcalli Estado de M xico C P 54730 M xico Tel 55 1500 4500 La presente garant a cubre los siguientes productos contra cualquier defecto de fabricaci n en sus materiales y mano de obra A Garantizamos los productos de limpieza aire comprimido y consumibles por 60 dias a partir de la fecha de entrega o por el tiempo en que se agote totalmente su contenido por su propia funci n de uso lo que suceda primero B Garantizamos los productos con partes moviles por 3 a os C Garantizamos los demas productos por 5 a os productos sin partes moviles bajo las siguientes condiciones 1 Todos los productos a que se refiere esta garant a ampara su cambio f sico sin ning n cargo para el consumidor 2 El comercializador no tiene talleres de servicio debido a que los productos que se garantizan no cuentan con reparaciones ni refacciones ya que su garant a es de cambio f sico 3 La garant a cubre exclusivamente aquellas partes equipos o sub ensambles que hayan sido instaladas def brica y no incluye en ning n caso el equipo adicional o cualesquiera que hayan sido adicionados al mismo por el usuario o distribuidor Para hacer efectiva esta garant a bastara con presentar el producto al distribuidor en el domicilio donde fue adquirido o en el domicilio de IC Intracom M xico S A de C V junto con los accesorios contenidos en su empaque acompa ado de su p liza debidamente llenada y sellada por l
13. sk for storing parity stripes The data and parity information is arranged on the disk array so that parity is written to different disks There are at least three members in a Parity RAID set The following example illustrates how the parity is rotated from disk to disk Parity RAID uses less capacity for protection and is the preferred method to reduce the cost per megabyte for larger installations Mirroring requires a 100 percent increase in capacity to protect the data whereas the above example requires only a 50 percent increase The required capacity decreases as the number of disks in the group increases Just a Bunch of Disks JBOD or Contiguous The JBOD here also known as Contiguous means a logical drive that can be either an entire disk drive or a segment of a single disk drive For this card the JBOD function only supports one disk JBOD here is a Contiguous configuration option in Create RAID Group in SATA RAID5 Manager Utility CARD INSTALLATION Power down the computer system Insert the card into an available bus slot Power the system back on Install the driver see Driver Installation Remove all the existing SATA RAID GUI or Java SATA RAID GUI to ensure the new SATA RAID5 GUI can work properly without possible conflicts Install the new SATA RAID5 GUI Power down the computer system again Connect hard drives to SATA ports Power the system back on If you connect the used HDDs
14. to SATA ports press lt CTRL gt lt S gt or lt F4 gt then delete the Raid setting on every used HDD when BIOS booting 11 Use SATA RAID5 Manager GUI for the creation of a RAID Group e If 1 disk select the Make Pass Thru option in the Device menu or VC amp ND OO ON 0 1 2 MANHATTAN 12 13 the Concatenate or Contiguous option in the Create RAID Group menu e If 2 disks dont select the Parity RAID or Mirrored Striped setting e If 3 disks dont select the Mirrored Striped setting Click Task Manager to make sure RAID setting is complete With RAIDS setting it can be hours before a component is ready and functions are available so schedule accordingly Use Device Manager for hard disk initialization partitioning and formatting BIOS SETTING RAID SETTING Creating and deleting RAID sets is a function found in BIOS Basic Input Output system During bootup the RAID setting message will appear and pause for a few moments to allow the user to choose what to do This board will act as a normal non RAID card when BIOS isn t configured for RAID Just proceed to the Driver Installation section If you use a traditional parallel ATA HDD make sure your hard drives are set up as Master mode before the RAID setting Creating Striped Sets RAID 0 CONOOFRWDN gt 9 As BIOS boots press lt CTRL gt lt S gt or lt F4 gt to enter the RAID BIOS utility Select C

Download Pdf Manuals

image

Related Search

Related Contents

User's manual - page screenshot of kolbe  Modular Flat Moon  ADVANCED FEATURES - Bio-Rad  VACUPRESS 620 S3 - UNILOCK  Users Manual of GT2560 - myhobby-CNC  tapes par étapes - WebConceptFrance  supplement  CARCOMAS - Xylazel  SOUTENANCE A CRETEIL  USER'S GUIDE 1 General information 3 - bea  

Copyright © All rights reserved.
Failed to retrieve file