Home

Gigabyte GA-78LMT-S2P motherboard

1. Note The DVI D port does not support D Sub connection by adapter Only for GA 78LMT USB3 Only for GA 78LMT S2P Hardware Installation 12 1 7 Internal Connectors 1 ATX 12V 7 F_AUDIO 2 ATX 8 F_USB1 F_USB2 3 CPU_FAN 9 COM 4 SYS FAN 10 CLR CMOS 5 SATA2_0 4 2 3 4 5 11 BAT 6 F_PANEL Read the following guidelines before connecting external devices A e First make sure your devices are compliant with the connectors you wish to connect e Before installing the devices be sure to turn off the devices and your computer Unplug the power cord from the power outlet to prevent damage to the devices e After installing the device and before turning on the computer make sure the device cable has been securely attached to the connector on the motherboard 13 Hardware Installation 1 2 ATX_12V ATX 2x2 12V Power Connector and 2x12 Main Power Connector With the use of the power connector the power supply can supply enough stable power to all the com ponents on the motherboard Before connecting the power connector first make sure the power supply is turned off and all devices are properly installed The power connector possesses a foolproof design Connect the power supply cable to the power connector in the correct orientation The 12V power con nector mainly supplies power to the CPU If the 12V power connector is not connected the computer will not start To meet expansion
2. Whether the CPU fan speed control function is supported will depend on the CPU cooler you install BIOS ES 2 x 16 Mbit flash Use of licensed AWARD BIOS Support for DualBIOS PnP 1 0a DMI 2 0 SM BIOS 2 4 ACPI 1 0b Unique Features gt gt UO Support for BIOS Support for Q Flash Support for Xpress BIOS Rescue Support for Download Center Support for Xpress Install Support for Xpress Recovery2 Support for EasyTune Available functions in EasyTune may differ by motherboard model Support for Smart Recovery Only for GA 78LMT USB3 Only for GA 78LMT S2P 9 Hardware Installation Unique Features Support for Auto Green Support for ON OFF Charge Support for Cloud OC Support for Q Share Bundl A RES Norton Internet Security OEM version Operating O gS System Support for Microsoft Windows 7 Vista XP iC Form Factor Micro ATX Form Factor 24 4cm x 20 6cm GIGABYTE reserves the right to make any changes to the product specifications and product related information without prior notice 1 3 Installing the CPU and CPU Cooler t Read the following guidelines before you begin to install the CPU Make sure that the motherboard supports the CPU Go to GIGABYTE s website for the latest CPU support list Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to
3. Figure 3 8 After the creation is complete the screen will return to LD View Menu where you will see the newly created array 9 Press lt Esc gt to return to Main Menu and press lt Esc gt again if you want to exit the RAID BIOS utility Appendix 38 Making a SATA RAID Driver Diskette Copy the driver for the SATA controller from the motherboard driver disk to a floppy disk for Windows XP or a USB flash drive for Windows 7 Vista For example to copy the RAID driver for Windows XP 32 bit operat ing system copy the driver from the following directory to your floppy disk BootDrv SBxxx x86 To install Windows 64 bit copy the files in the x64 folder Installing the SATA RAID Driver and Operating System A Installing Windows XP Before installing Windows XP connect a USB floppy disk drive to your computer Restart your system to boot from the Windows XP setup disk and press lt F6 gt as soon as you see the message Press F6 if you need to install a 3rd party SCSI or RAID driver Insert the floppy disk containing the SATA controller driver Follow the on screen instructions to install the two drivers displayed When completed proceed with the Windows XP installation B Installing Windows 7 Vista Restart your system to boot from the Windows 7 Vista setup disk and perform standard OS installation steps Select Load Driver Insert the floppy disk USB flash drive for users using a SATA optical drive containing the driver or i
4. clearing CMOS jumper in Chapter 1 for how to clear the CMOS values e Because BIOS flashing is potentially risky if you do not encounter problems using the current 2 1 Startup Screen The following screens may appear when the computer boots A The LOGO Screen Default GA 78LMT USB3 GIGABYTE Ultra Durable Series Motherboards LED POST SCREEN BIOS SETUP Q FLASH XPRESS RECOVERY2 BOOT MENU QENE Q FLASH Function Keys B The POST Screen Award Modular BIOS v6 00PG Copyright C 1984 2011 Award Software Inc GA 78LMT USB3 D13 Motherboard Model BIOS Version lt DEL gt BIOS Setup lt F9 gt XpressRecovery2 lt F12 gt Boot Menu lt End gt Qflash Function Keys 03 15 2011 RS 80L SB 10 A66CGOHC 00 BIOS Setup 20 2 2 The Main Menu Once you enter the BIOS Setup program the Main Menu as shown below appears on the screen Use ar row keys to move among the items and press lt Enter gt to accept or enter a sub menu Sample BIOS Version GA 78LMT USB3 D13 CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup Save amp Exit Setup PnP PCI Configurations Exit Without Saving PC Health Status ESC Quit TL Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Ex
5. 4T 7T lt Trfc0 for DIMM1 Options are Auto default 90ns 110ns 160ns 300ns 350ns BIOS Setup 24 Trfc1 for DIMM2 Options are Auto default 90ns 110ns 160ns 300ns 350ns Write Recovery Time Options are Auto default 5T 8T 10T 12T Precharge Time Options are Auto default 4T 7T Row Cycle Time Options are Auto default 11T 42T RAS to RAS Delay Options are Auto default 4T 7T Channel Interleaving Enables or disables memory channel interleaving Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability Default Enabled Bank Interleaving Enables or disables memory bank interleaving Enabled allows the system to simultaneously access dif ferent banks of the memory to increase memory performance and stability Default Enabled DQS Training Control Enables or disables memory DQS training each time the system restarts Default Skip DQS Memclock tri stating Determines whether to enable memory clock tri stating in CPU C3 or Alt VID mode Default Disabled xxx System Voltage Optimized gt System Voltage Control Determines whether to manually set the system voltages Auto lets the BIOS automatically set the system voltages as required Manual allows all voltage control items below to be configurable Default Auto DDR3 Voltage Control Allows you to set memory voltage gt gt Normal Supplies the memory
6. 854 9338 818 854 9339 hereby declares that the product Product Name Motherboard Model Number GA 78LMT USB3 GA 78LMT S2P Conforms to the following specifications FCC Part 15 Subpart B Section 15 107 a and Section 15 109 a Class B Digital Device Supplementary Information This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful and 2 this device must accept any inference received including that may cause undesired operation Representative Person s Name ERIC LU Signature Eric Lu Date Mar 1 2011 Copyright 2011 GIGA BYTE TECHNOLOGY CO LTD All rights reserved The trademarks mentioned in this manual are legally registered to their respective owners Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE Changes to the specifications and features in this manual may be made by GIGABYTE with out prior notice No part of this manual may be reproduced copied translated transmitted or published in any form or by any means without GIGABYTE s prior written permission m In order to assist in the use of this product carefully read the User s Manual m For product related information check on our website at http www gigabyte com Identifying Your Motherboard Revision The revision number on your motherboard looks like this REV X X For example REV 1 0 mean
7. Default Enabled lt gt CPU Smart FAN Mode Specifies how to control CPU fan speed This item is configurable only when CPU Smart FAN Control is enabled gt gt Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode Default Voltage Sets Voltage mode for a 3 pin CPU fan gt gt PWM Sets PWM mode for a 4 pin CPU fan 2 10 Load Fail Safe Defaults CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User Password Power Manageme il 9 PnP PCI Configut Load Fail Safe Defaults Y N N PC Health Status ESC Quit Tl Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Exit Setup F12 Load CMOS from BIOS Load Fail Safe Defaults Press lt Enter gt on this item and then press the lt Y gt key to load the safest BIOS default settings In case system instability occurs you may try to load Fail Safe defaults which are the safest and most stable BIOS settings for the motherboard BIOS Setup 34 2 11 Load Optimized Defaults CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User
8. gt gt AHCI Configures the SATA controllers to AHCI mode Advanced Host Controller Interface AHCI is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug lt OnChip SATA Port4 5 Type SATA2_4 SATA2_5 connectors This option is configurable only when OnChip SATA Type is set to RAID or AHCI Configures the oper ating mode of the integrated SATA2_4 SATA2_5 connectors gt gt IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode Default b gt As SATA Type The mode depends on the OnChip SATA Type settings Only for GA 78LMT USB3 29 BIOS Setup lt OnChip SATA Port as ESP CMOS Setup Utility Copyright C 1984 2011 Award Software OnChip SATA Port as ESP Port0 as ESP Disabled Item Help Port as ESP Disabled Menu Level gt gt Port2 as ESP Disabled Port3 as ESP Disabled x Port4 as ESP Disabled x PortS as ESP Disabled TL gt lt Move Enter Select PU PD Value F10 Save ESC Exit F1 General Help F5 Previous Values F6 Fail Safe Defaults F7 Optimized Defaults Port0 as ESP Port1 as ESP Port2 as ESP Port3 as ESP This option is configurable only when OnChip SATA Type is set to AHCI Enabled will speed up the hot plug detection of the connected SATA device Default Disabled lt gt Port4 as ESP Port5 as ESP This option is configurable only when OnChip SATA Type is set to
9. No Definition 2 SATA2 2 SATA2_5 r GND 7 2 TXP SATA2 _1 SATA2 _4 3 TXN l f i 4 GND SATA2_0 SATA2 _3 5 RXN i 5 RP 7 GND drives If more than two hard drives are to be used the total number of hard drives must be an even number e ARAID 10 configuration requires four hard drives EQ e ARAID 0 or RAID 1 configuration requires at least two hard Please connect the L shaped end of the SATA cable to your SATA hard drive 15 Hardware Installation 6 F_PANEL Front Panel Header Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below Note the positive and negative pins before connecting the cables SPEAK PWR Power LED oyp _ Heeren H SPEAK _ _ di CL Header Power PW RES Reset q Switch PW RES Switch Message Power MSG Sleep LED MSG HD Hard Drive HD Activity LED e MSG PWR Message Power Sleep LED Yellow Purple System Status LED Connects to the power status indicator on the chassis front panel The LED S0 On is
10. Password Power Manageme P PnP PCI Configur Load Optimized Defaults Y N N PC Health Status ESC Quit Tl7 Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Exit Setup F12 Load CMOS from BIOS Load Optimized Defaults Press lt Enter gt on this item and then press the lt Y gt key to load the optimal BIOS default settings The BIOS defaults settings help the system to operate in optimum state Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values 2 12 Set Supervisor User Password CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User Password Power Manageme PnP PCI Configut Enter Password PC Health Status ESC Quit Tl gt Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Exit Setup F12 Load CMOS from BIOS Change Set Disable Password Press lt Enter gt on this item and type the password with up to 8 characters and then press lt Enter gt You will be requested to confirm the password Type the password again and press lt Enter gt The BIOS Setup program allows you to specify two separate passwords Supervisor Password When a system password is set and the Password Check item in Advanced BIOS Features is set to Setup you must enter the supervis
11. speed control design For optimum heat dis sipation it is recommended that a system fan be installed inside the chassis CPU_FAN E Pin No Definition 2 12V Speed Control o CPU_FAN 3 Sense 4 Speed Control iT SYS_FAN Pin No Definition 1 h 1 GND SYS_FAN 2 12 3 Sense e Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating Over heating may result in damage to the CPU or the system may hang e These fan headers are not configuration jumper blocks Do not place a jumper cap on the headers SATA2_0 1 2 3 4 5 SATA 3Gb s Connectors Controlled by AMD SB710 South Bridge The SATA connectors conform to SATA 3Gb s standard and are compatible with SATA 1 5Gb s standard Each SATA connector supports a single SATA device The AMD SB710 South Bridge supports RAID 0 RAID 1 RAID 10 and JBOD Refer to Chapter 5 Configuring SATA Hard Drive s for instructions on configuring a RAID array Pin
12. tightly and securely When handling the motherboard avoid touching any metal leads or connectors It is best to wear an electrostatic discharge ESD wrist strap when handling electronic com ponents such as a motherboard CPU or memory If you do not have an ESD wrist strap keep your hands dry and first touch a metal object to eliminate static electricity Prior to installing the motherboard please have it on top of an antistatic pad or within an electrostatic shielding container Before unplugging the power supply cable from the motherboard make sure the power sup ply has been turned off Before turning on the power make sure the power supply voltage has been set according to the local voltage standard Before using the product please verify that all cables and power connectors of your hard ware components are connected To prevent damage to the motherboard do not allow screws to come in contact with the motherboard circuit or its components Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing Do not place the computer system on an uneven surface Do not place the computer system in a high temperature environment Turning on the computer power during the installation process can lead to damage to sys tem components as well as physical harm to the user If you are uncertain about any installation steps or have a problem related to the use of the product please consul
13. voltage as required Default gt gt 0 100V 0 300V The adjustable range is from 0 100V to 0 300V Note Increasing memory voltage may result in damage to the memory NorthBridge Volt Control Allows you to set the North Bridge voltage gt gt Normal Supplies the North Bridge voltage as required Default gt 0 1V 0 3V The adjustable range is from 0 1V to 0 3V SouthBridge Volt Control Allows you to set the South Bridge voltage gt gt Normal Supplies the South Bridge voltage as required Default b gt 0 1V 0 2V The adjustable range is from 0 1 to 0 2V CPU NB VID Control Allows you to set the CPU North Bridge VID voltage Auto sets the CPU North Bridge VID voltage as required The adjustable range is dependent on the CPU being installed Default Normal Note Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU 25 BIOS Setup lt CPU Voltage Control Allows you to set the CPU voltage Auto sets the CPU voltage as required The adjustable range is de pendent on the CPU being installed Default Normal Note Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU lt Normal CPU Vcore Displays the normal operating voltage of your CPU 2 4 Standard CMOS Features CMOS Setup Utility Copyright C 1984 2011 Award Software Standard CMOS Features Date mm dd yy Item Help Time hh mm ss oz Menu Level gt IDE Channel 0 Mast
14. 1 Dual Channel mode cannot be enabled if only one DDR3 memory module is installed 2 When enabling Dual Channel mode with two memory modules it is recommended that memory of the same capacity brand speed and chips be used for optimum performance 1 5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card e Make sure the motherboard supports the expansion card Carefully read the manual that came with your expansion card e Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage 11 Hardware Installation PS 2 Keyboard and PS 2 Mouse Port Use the upper port green to connect a PS 2 mouse and the lower port purple to connect a PS 2 keyboard D Sub Port The D Sub port supports a 15 pin D Sub connector Connect a monitor that supports D Sub connection to this port DVI D Port The DVI D port conforms to the DVI D specification and supports a maximum resolution of 1920x1200 the actual resolutions supported depend on the monitor being used Connect a monitor that supports DVI D connection to this port USB 3 0 2 0 Port The USB 3 0 port supports the USB 3 0 specification and is compatible to the USB 2 0 1 1 specification Use this port for USB devices such as a USB keyboard mouse USB printer USB flash drive and etc RJ 45 LAN Port The Gigabit Ethernet LAN port provides Internet connecti
15. 10 Save ESC Exit F1 General Help F7 Optimized Defaults lt gt ACPI Suspend Type Specifies the ACPI sleep state when the system enters suspend gt gt S1 POS Enables the system to enter the ACPI S1 Power on Suspend sleep state In S1 sleep state the system appears suspended and stays in a low power mode The system can be resumed at any time b gt S3 STR Enables the system to enter the ACPI S3 Suspend to RAM sleep state default In S3 sleep state the system appears to be off and consumes less power than in the S1 state When signaled by a wake up device or event the system resumes to its working state exactly where it was left off lt gt Soft Off by Power button Configures the way to turn off the computer in MS DOS mode using the power button gt gt Instant Off Press the power button and then the system will be turned off instantly Default gt Delay 4 Sec Press and hold the power button for 4 seconds to turn off the system If the power button is pressed for less than 4 seconds the system will enter suspend mode Note Supported on Windows 7 Vista operating system only 31 BIOS Setup USB Wake Up from S3 Allows the system to be awakened from ACPI S3 sleep state by a wake up signal from the installed USB device Default Enabled Modem Ring Resume Allows the system to be awakened from an ACPI sleep state by a wake up signal from a modem that supports wake up function Default Disabled PME Event Wak
16. AHCI and OnChip SATA Type Port4 5 is set to As SATA Type Enabled will speed up the hot plug detection of the connected SATA device Default Disabled lt Onboard LAN Function Enables or disables the onboard LAN function Default Enabled If you wish to install a 3rd party add in network card instead of using the onboard LAN set this item to Disabled lt Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip Default Disabled lt gt SMART LAN LAN Cable Diagnostic Function CMOS Setup Utility Copyright C 1984 2011 Award Software SMART LAN Start detecting at Port Item Help Partl 2 Status Open Length Menu Level gt gt Part3 6 Status Open Length Part4 5 Status Open Length Part7 8 Status Open Length TL gt lt Move Enter Select PU PD Value F10 Save ESC Exit F1 General Help F5 Previous Values F6 Fail Safe Defaults F7 Optimized Defaults This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable This feature will detect cabling issue and report the approximate distance to the fault or short Refer to the following information for diagnosing your LAN cable lt gt Onboard Audio Function Enables or disables the onboard audio function Default Enabled If you wish to install a 3rd party add in audio card instead of using the onboard audio set this item to Disabled BIOS Se
17. BIOS Features snsssssesnssessrsrssrenrenssrenssnrsrenrsnnsrenrenrnrennnrnrennas Zi 2 60 integrated PenpherdlS siisii 29 2 7 Power Management Setup c ccsccssssscssssssessessscsssssssssessessessesscseesesaseess 31 20 PnAPOICONNgUTatONS ssena a AR 33 29 PO Heati SlalUS seisean EA E 33 210 Load Fail Safe Defaulls wc cvesscnsussnsuserssseseseavecsancewvescaastveeaneaacneanatadateaveucecedten 34 2 11 Load Optimized Defaults ssssissiisiisesissiiiiiai aa 35 2 12 Set Supervisor User Password ccccccssssssssecsssssessesssesscssesssesessssesessessssees 39 DAS AVE Cy EX SOUD ecen E 36 ZA EKL WOU O ANIN eann tories gluta seenneneeteneenss 36 Chapter 3 Drivers Installation c ccccccscscsscscsssssescssssseessscsseessecssessseesessseeseeasersans 3 Chapter 4 Appendix cccccccccscssscssssssscsssssscsssecsessssecsesessecsssessecessesascessesaseseesaseesas 37 Configuring SATA Hard Drive S ccccccccccecsscscsesscsssscsesscsesecsssessssesssessssecassesassees 37 gai ATX_12V ce CELLY F_AUDIO AMD 760G Realtek RTL8111E PCIEX16 or T8720 pcx A GA 78LMT USB3 AvD s8710 GA 78LMT S2P SATA2_2 t SATA2_5 SATA2_1 JATA2 4 SATA2_ T 9TA2 3 F_USB2 F_USB1 CLR_CMOS SYS_FAN Box Contents MI GA 78LMT USB3 or GA 78LMT S2P motherboard v Motherboard driver disk v Two SATA cables MI User s Manual MI I O Shield The box contents above are for reference only and th
18. GA 78LMT USB3 GA 78LMT S2P User s Manual O EN 55011 O EN 55013 O EN 55014 1 O EN 55015 O EN 55020 amp EN 55022 O DIN VDE 0855 O part 10 O part 12 amp CE marking O EN 60065 O EN 60335 Declaration of Conformity We Manufacturer Importer full address G B T Technology Trading GMbH Bullenkoppel 16 22047 Hamburg Germany declare that the product description of the apparatus system installation to which it refers Motherboard GA 78LMT USB3 GA 78LMT S2P is in conformity with reference to the specification under which conformity is declared in accordance with the EMC Directive 2004 108 E Limits and methods of measurement amp EN 61000 3 2 Disturbances in supply systems caused of radio disturbance characteristics of industrial scientific and medical ISM amp EN 61000 3 3 Disturbances in supply systems caused high frequency equipment by household appliances and similar electrical equipment Voltage fluctuations Limits and methods of measurement K EN 55024 Information Technology of radio disturbance characteristics of equipment Immunity broadcast receivers and associated characteristics Limits and methods of equipment measurement Limits and methods of measurement O EN 50082 1 Generic immunity standard Part 1 of radio disturbance characteristics of Residual commercial and light industry household electrical appliances portable tools and similar electrical O EN 50082 2 Generic immunit
19. IOS Setup to load factory defaults select Load Optimized De faults or manually configure the BIOS settings refer to Chapter 2 BIOS Setup for BIOS configurations Hardware Installation 18 11 BAT Battery The battery provides power to keep the values such as BIOS configurations date and time information in the CMOS when the computer is turned off Replace the battery when the battery voltage drops to a low level or the CMOS values may not be accurate or may be lost You may clear the CMOS values by removing the battery 1 Turn off your computer and unplug the power cord 2 Gently remove the battery from the battery holder and wait for one minute Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 3 Replace the battery 4 Plug in the power cord and restart your computer Uv e Always turn off your computer and unplug the power cord before replacing the battery A e Replace the battery with an equivalent one Danger of explosion if the battery is replaced with an incorrect model e Contact the place of purchase or local dealer if you are not able to rep
20. ally select the drivers you wish to install GIGABYTE Install Chipset Drivers We recommend that you install the drivers listed below for your motherboard Please click Install All to install all the drivers automatically ashtop Connect is the smart start page for browse di that combines your most visited web sites your history your ebook friends and your real time news feed into e rience r ul i an enhanced view for a more personal Internet expe rd ATi 7 Series VGA Driver Windows 7 Version 10 4 Size 194 21MB ATi 7 Series VGA Driver for Windows 7 d Realtek HD Audio Driver Version R2 54 6235 Size 267 62MB Realtek High Definition Audio Driver d Realtek 8111 8168 LAN Driver for gigabit Windows 7 Chapter 4 Appendix Configuring SATA Hard Drive s Before you begin Please prepare e At least two SATA hard drives to ensure optimal performance it is recommended that you use two hard drives with identical model and capacity If you do not want to create RAID you may prepare only one hard drive e An empty formatted floppy disk e Windows Vista XP setup disk e Motherboard driver disk Configuring the Onboard SATA Controller A Installing SATA hard drive s in your computer Attach one end of the SATA signal cable to the rear of the SATA hard drive and the other end to available SATA port on the motherboard Then connect the power connector from your power supply to the hard dri
21. commended that the CPU frequency be set in accordance with the CPU specifications PCIE Clock MHz Allows you to manually set the PCle clock frequency The adjustable range is from 100 MHz to 150 MHz Auto sets the PCle clock frequency to standard 100 MHz Default Auto HT Link Width Allows you to manually set the width for the HT Link between the CPU and chipset gt gt Auto BIOS will automatically adjust the HT Link Width Default gt gt 8 bit Sets HT Link Width to 8 bit gt gt 16 bit Sets HT Link Width to 16 bit HT Link Frequency Allows you to manually set the frequency for the HT Link between the CPU and chipset gt gt Auto BIOS will automatically adjust the HT Link Frequency Default b gt x1 x10 Sets HT Link Frequency to x1 x10 200 MHz 2 0 GHz Set Memory Clock Determines whether to manually set the memory clock Auto lets BIOS automatically set the memory clock as required Manual allows the memory clock control item below to be configurable Default Auto Note This item is present only when you install a CPU that supports this feature 23 BIOS Setup gt Memory Clock This option is configurable only when Set Memory Clock is set to Manual gt gt X4 00 Sets Memory Clock to X4 00 gt X5 33 Sets Memory Clock to X5 33 b gt X6 66 Sets Memory Clock to X6 66 gt gt X8 00 Sets Memory Clock to X8 00 lt DRAM Configuration CMOS Setup Utility Copyright C 1984 2011 Award Software DRAM Con
22. e Up Allows the system to be awakened from an ACPI sleep state by a wake up signal from a PCI or PCle de vice Note To use this function you need an ATX power supply providing at least 1A on the 5VSB lead Default Enabled HPET Support Enables or disables High Precision Event Timer HPET for Windows 7 Vista operating system Default Enabled Power On By Mouse Allows the system to be turned on by a PS 2 mouse wake up event Note To use this function you need an ATX power supply providing at least 1A on the 5VSB lead gt gt Disabled Disables this function Default gt gt Double Click Double click on left button on the PS 2 mouse to turn on the system Power On By Keyboard Allows the system to be turned on by a PS 2 keyboard wake up event Note you need an ATX power supply providing at least 1A on the 5VSB lead gt Disabled Disables this function Default gt Password Set a password with 1 5 characters to turn on the system b gt Any KEY Press any key on the keyboard to turn on the system gt Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system KB Power ON Password Set the password when Power On by Keyboard is set to Password Press lt Enter gt on this item and set a password with up to 5 characters and then press lt Enter gt to accept To turn on the system enter the password and press lt Enter gt Note To cancel the password press lt Enter gt on this item Whe
23. e actual items shall depend on the product package you obtain Only for GA 78LMT USB3 GA 78LMT USB3 GA 78LMT S2P Motherboard Block Diagram CPU CLK 200 MHz 1 PCI Express x16 lt a AMS AM3 CPU DDR3 1333 0 C 1066 800 MHz Dual Channel Memory PCle CLK 100 MHz Hyper Transport 3 0 GFX CLK 100 MHz x16 x1 PCI Express Bus AMD 760G D Sub 1X1 DVI D PCle CLK 100 MHZ 1 PCI Express x1 6 USB 2 0 1 1 Ports 6 SATA 3Gb S 8 USB 2 0 1 1 Ports AMD SB710 PCI Bus asos LPC Bus ITE 178720 CODEC PS 2 KB Mouse oO Oo o 1 PCI TE a PCI CLK sss 33 MHz eae SOd PEE lt I S O Only for GA 78LMT USB3 Only for GA 78LMT S2P 1 O 1 Chapter1 Hardware Installation 1 1 The motherboard contains numerous delicate electronic circuits and components which can Installation Precautions become damaged as a result of electrostatic discharge ESD Prior to installation carefully read the user s manual and follow these procedures Prior to installation do not remove or break motherboard S N Serial Number sticker or warranty sticker provided by your dealer These stickers are required for warranty validation Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components When connecting hardware components to the internal connectors on the motherboard make sure they are connected
24. emory Clock x Memory Clock gt DRAM Configuration xxakxK System Voltage Optimized System Voltage Control DDR3 Voltage control NorthBridge Volt Control SouthBridge Volt Control CPU NB VID Control CPU Voltage Control Normal CPU Vcore Tl gt lt Move Enter Select F5 Previous Values MB Intelligent Tweaker M I T Press Enter Item Help Auto 2800Mhz Menu Level gt Auto 2000Mhz Enabled Auto 3100Mhz Disabled Auto 200 Auto Auto Auto 2000Mhz Auto x4 00 800Mhz Press Enter ok 2k 2 ok 2k 2k 2k ok Auto Auto Auto Auto Auto Auto 1 2750V PU PD Value F10 Save ESC Exit F1 General Help F6 Fail Safe Defaults F7 Optimized Defaults dent on your overall system configurations Incorrectly doing overclock overvoltage may result in 1 e Whether the system will work stably with the overclock overvoltage settings you made is depen damage to CPU chipset or memory and reduce the useful life of these components This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results Inadequately altering the settings may result in system s failure to boot If this occurs clear the CMOS values and reset the board to default values e When the System Voltage Optimized item blinks in red it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings gt IGX Configuratio
25. er IDE Channel 0 Slave IDE Channel 1 Master IDE Channel 1 Slave IDE Channel 2 Master IDE Channel 2 Slave Halt On All But Keyboard Base Memory 640K Extended Memory 766M TL Move Enter Select PU PD Value F10 Save ESC Exit F1 General Help F5 Previous Values F6 Fail Safe Defaults F7 Optimized Defaults lt Date mm dd yy Sets the system date lt Time hh mm ss Sets the system time lt IDE Channel 0 1 Master Slave gt gt IDE Channel 0 1 Master Slave Configure your SATA devices by using one of the three methods below e None If no SATA devices are used set this item to None so the system will skip the detection of the device during the POST for faster system startup e Auto Lets the BIOS automatically detect SATA devices during the POST Default e Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS gt Access Mode Sets the hard drive access mode Options are Auto default CHS LBA Large lt IDE Channel 2 Master Slave gt Extended IDE Drive Configure your SATA devices by using one of the two methods below e Auto Lets the BIOS automatically detect SATA devices during the POST Default e None If no SATA devices are used set this item to None so the system will skip the detection of the device during the POST for faster system startup Access Mode Sets the hard drive access mode Options are Auto default Large BIOS Se
26. ess graphics card or the onboard graphics gt gt PCI Slot Sets the PCI graphics card as the first display Default b gt OnChipVGA Sets the onboard graphics as the first display gt PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display 2 6 Integrated Peripherals CMOS Setup Utility Copyright C 1984 2011 Award Software Integrated Peripherals OnChip SATA Controller Enabled Item Help OnChip SATA Type Native IDE Menu Level gt x OnChip SATA Port4 5 Type lt OnChip SATA Port as ESP Onboard LAN Function Onboard LAN Boot ROM SMART LAN Onboard Audio Function Onboard USB 3 0 Controller USB Controllers USB Legacy Function USB Storage Function Onboard Serial Port IDE Press Enter Enabled Disabled Press Enter Enabled Enabled Enabled Enabled Enabled 3F8 IRQ4 Tl gt lt Move Enter Select F5 Previous Values lt OnChip SATA Controller Enables or disables the integrated SATA controller Default Enabled lt OnChip SATA Type SATA2_0 SATA2_3 connectors Configures the operating mode of the integrated SATA2_0 SATA2_3 controller gt gt Native IDE Allows the SATA controller to operate in Native IDE mode Default Enable Native IDE mode if you wish to install operating systems that support Native PU PD Value F10 Save ESC Exit F1 General Help F6 Fail Safe Defaults F7 Optimized Defaults mode gt gt RAID Enables RAID for the SATA controller
27. figuration DCTs Mode Unganged Item Help DDR3 Timing Items Auto SPD Auto Menu Level gt 1T 2T Command Timing Auto CAS latency Auto 9T 6T RAS to CAS R W Delay Auto 9T 6T Row Precharge Time Auto 9T 6T Minimum RAS Active Time Auto 24T ST TwTr Command Delay Auto 5i 4T TrfcO for DIMM1 Auto 90ns 90ns Trfcl for DIMM2 Auto Write Recovery Time Auto 10T Precharge Time Auto si Row Cycle Time Auto seul RAS to RAS Delay Auto 4T X X X X X X X X X X X X Channel Interleaving Bank Interleaving DQS Training Control Memclock tri stating Enabled Enabled Skip DQS Disabled PU PD Value F10 Save ESC Exit F1 General Help F6 Fail Safe Defaults F7 Optimized Defaults T4 gt Move Enter Select F5 Previous Values gt DCTs Mode Allows you to set memory control mode gt gt Ganged Sets memory control mode to single dual channel gt Unganged Sets memory control mode to two single channel Default lt DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable Options are Auto default Manual lt 1T 2T Command Timing Options are Auto default 1T 2T gt CAS latency Options are Auto default 4T 12T lt RAS to CAS RW Delay Options are Auto default 5T 12T lt Row Precharge Time Options are Auto default 5T 12T lt Minimum RAS Active Time Options are Auto default 15T 30T lt TwTr Command Delay Options are Auto default
28. gu ration In the following procedure we ll create RAID 0 as an example Steps 1 Under the RAID Mode section press the lt SPACE gt key to select RAID 0 2 Set the Stripe Block size 64 KB is the default 3 Under the Drives Assignments section press the up or down arrow key to highlight a drive 4 Press the lt SPACE gt key or lt Y gt to change the Assignment option to Y This action adds the drive to the disk array The Drv section will show the number of disks assigned 5 Press lt Ctrl gt lt Y gt keys to save the information The message in Figure 1 will appear Press lt Ctrl gt lt Y gt to input the array name If you do not input the array name the default array name will be used Please press Ctrl Y key to input the LD Name or press any key to exit If you do not input any LD name the default LD name will be used Figure 1 6 When the next message appears press lt Ctrl gt lt Y gt to clear the MBR or press other keys to ignore this option Fast Initialization Option has been selected It will erase the MBR data of the disk lt Press Ctrl Y Key if you are sure to erase it gt lt Press any other key to ignore this option gt Figure 2 7 Then the message in Figure 8 will appear Press lt Ctrl gt lt Y gt to set the capacity of the RAID array or press other keys to set the array to its maximum capacity Press Ctrl Y to Modify Array Capacity or press any other key to use maximum capacity
29. it Setup F12 Load CMOS from BIOS Change CPU s Clock amp Voltage access more advanced options e When the system is not stable as usual select the Load Optimized Defaults item to set your system to its defaults e The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version QB If you do not find the settings you want in the Main Menu or a submenu press lt Ctrl gt lt F1 gt to mM The Functions of the lt F11 gt and lt F12 gt keys For the Main Menu Only gt F11 Save CMOS to BIOS This function allows you to save the current BIOS settings to a profile You can create up to 8 profiles Profile 1 8 and name each profile First enter the profile name to erase the default profile name use the SPACE key and then press lt Enter gt to complete gt F12 Load CMOS from BIOS If your system becomes unstable and you have loaded the BIOS default settings you can use this function to load the BIOS settings from a profile created before without the hassles of reconfiguring the BIOS settings First select the profile you wish to load then press lt Enter gt to complete 21 BIOS Setup 2 3 MB Intelligent Tweaker M I T CMOS Setup Utility Copyright C 1984 2011 Award Software IGX Configuration CPU Clock Ratio CPU NorthBridge Freq Core Performance Boost CPB Ratio Turbo CPB CPU Host Clock Control CPU Frequency MHz PCIE Clock MHz HT Link Width HT Link Frequency Set M
30. lace the battery by your self or uncertain about the battery model e When installing the battery note the orientation of the positive side and the negative side of the battery the positive side should face up e Used batteries must be handled in accordance with local environmental regulations 19 Hardware Installation Chapter 2 BIOS Setup To access the BIOS Setup program press the lt Delete gt key during the POST when the power is turned on To see more advanced BIOS Setup menu options you can press lt Ctrl gt lt F1 gt in the main menu of the BIOS Setup program To upgrade the BIOS use either the GIGABYTE Q Flash or BIOS utility e Q Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system e BIOS is a Windows based utility that searches and downloads the latest version of BIOS from the Internet and updates the BIOS version of BIOS it is recommended that you not flash the BIOS To flash the BIOS do it with caution Inadequate BIOS flashing may result in system malfunction e It is recommended that you not alter the default settings unless you need to to prevent system instability or other unexpected results Inadequately altering the settings may result in system s failure to boot If this occurs try to clear the CMOS values and reset the board to default values Refer to the Load Optimized Defaults section in this chapter or introductions of the battery
31. n CMOS Setup Utility Copyright C 1984 2011 Award Software Internal Graphics Mode UMA Frame Buffer Size x Surround View VGA Core Clock control x VGA Core Clock MHz Tl7 lt Move Enter Select F5 Previous Values Internal Graphics Mode IGX Configuration UMA Item Help Auto Menu Level gt gt DIREI are Auto 350 PU PD Value F10 Save ESC Exit F6 Fail Safe Defaults F1 General Help F7 Optimized Defaults Allows you to determine whether to allocate system memory for the onboard graphics controller gt gt Disabled Disables the onboard graphics controller gt gt UMA Allocates memory for the onboard graphics controller from the system memory Default lt gt UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con troller MS DOS for example will use only this memory for display Options are Auto default 128MB 256MB 512MB Note This item is present only when you install a CPU that supports this feature BIOS Setup 22 Surround View Enables or disables the Surround View function This option is configurable only when Init Display First under Advanced BIOS Features is set to PEG and an ATI graphics card is installed Default Disabled VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock Default Auto VGA Core Clock MHz Allows you to manually set the VGA C
32. n prompted for the password press lt En ter gt again without entering the password to clear the password settings AC Back Function Determines the state of the system after the return of power from an AC power loss gt gt Soft Off The system stays off upon the return of the AC power Default gt gt Full On The system is turned on upon the return of the AC power gt gt Memory The system returns to its last known awake state upon the return of the AC power Power On by Alarm Determines whether to power on the system at a desired time Default Disabled lf enabled set the date and time as following gt gt Date of Month Turn on the system at a specific time on each day or on a specific day in a month gt Resume Time hh mm ss Set the time at which the system will be powered on automatically Note When using this function avoid inadequate shutdown from the operating system or removal of the AC power or the settings may not be effective Note Supported on Windows 7 Vista operating system only BIOS Setup 32 lt gt ErP Support Determines whether to let the system consume less than 1W power in S5 shutdown state Default Disabled Note When this item is set to Enabled the following four functions will become unavailable PME event wake up power on by mouse power on by keyboard and wake on LAN 2 8 PnP PCI Configurations CMOS Setup Utility Copyright C 1984 2011 Award Software PnP PCI Configura
33. nes before you begin to install the memory e Make sure that the motherboard supports the memory It is recommended that memory of the same capacity brand speed and chips be used Go to GIGABYTE s website for the latest supported memory speeds and memory modules e Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage e Memory modules have a foolproof design A memory module can be installed in only one direc tion If you are unable to insert the memory switch the direction Dual Channel Memory Configuration This motherboard provides two DDR3 memory sockets and supports Dual Channel Technology After the memory is installed the BIOS will automatically detect the specifications and capacity of the memory En abling Dual Channel memory mode will double the original memory bandwidth The two DDR3 memory sockets are divided into two channels and each channel has one memory socket as following gt Channel 0 DDR3_1 gt Channel 1 DDR3_2 5 cy J Vem Te Doo mr m DDR3 _2 i DDR3_1 Due to CPU limitations read the following guidelines before installing the memory in Dual Channel mode
34. nsert the motherboard driver disk For Windows 32 bit browse to BootDrv SBxxxW7 RAID W7 to load the driver and continue the OS installation For Windows 64 bit browse to BootDrv SBxxxW7 RAID W764A to load the driver and continue the OS installation 39 Appendix Appendix 40 41 Appendix Appendix 42 EA Appendix Contact Us GIGA BYTE TECHNOLOGY CO LTD Address No 6 Bao Chiang Road Hsin Tien Dist New Taipei City 231 Taiwan TEL 886 2 8912 4000 FAX 886 2 8912 4003 Tech and Non Tech Support Sales Marketing http ggts gigabyte com tw WEB address English http www gigabyte com WEB address Chinese http www gigabyte tw You may go to the GIGABYTE website select your language in the language list on the top right corner of the website e GIGABYTE Global Service System i OQO Global Technical Service To submit a technical or non technical Sales Market ing question please link to Welcome to GIGABYTE Service system If you want to submit P new question or check our Ease ieie enter your E http ggts gigabyte com tw Mail address and press the button to log in i Then select your language to enter the system F
35. o connections simultane ously e Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug For information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 8 F_USB1 F_USB2 USB 2 0 1 1 Headers The headers conform to USB 2 0 1 1 specification Each USB header can provide two USB ports via an optional USB bracket For purchasing the optional USB bracket please contact the local dealer Pin No Definition Power 5V Power 5V USB DX USB DY USB DX USB DY GND GND No Pin NC oi CO ol NIo oJIA wy PM When the system is in S4 S5 mode only the USB ports routed to the F_USB1 header can sup EB port the ON OFF Charge function e Do not plug the IEEE 1394 bracket 2x5 pin cable into the USB header A e Prior to installing the USB bracket be sure to turn off your computer and unplug the power cord from the power outlet to prevent damage to the USB bracket 17 Hardware Installation 9 COM Serial Port Header The COM header can provide one serial port via an optional COM port cable Fo
36. on at up to 1 Gbps data rate The following describes the states of the LAN port LEDs Connection Speed LED Activity LED Connection Speed LED Activity LED State Description State Description gt Orange 1 Gbps data rate Blinking Data transmission or receiving is occurring Green 100 Mbps data rate Off No data transmission or receiving is occurring LAN Port Off 10 Mbps data rate USB 2 0 1 1 Port The USB port supports the USB 2 0 1 1 specification Use this port for USB devices such as a USB key board mouse USB printer USB flash drive and etc Line In Jack Blue The default line in jack Use this audio jack for line in devices such as an optical drive walkman etc Line Out Jack Green The default line out jack Use this audio jack for a headphone or 2 channel speaker This jack can be used to connect front speakers in a 4 5 1 7 1 channel audio configuration Mic In Jack Pink The default Mic in jack Microphones must be connected to this jack To enable 7 1 channel audio you have to use an HD front panel audio module and enable the multi channel audio feature through the audio driver device and then remove it from the motherboard e When removing the cable pull it straight out from the connector Do not rock it side to side to prevent an electrical short inside the cable connector i e When removing the cable connected to a back panel connector first remove the cable from your
37. on when the system is operating The LED keeps blinking when the sys S1 Blinking tem is in S1 sleep state The LED is off when the system is in S3 S4 sleep S3 S4 S5 Off state or powered off S5 e PW Power Switch Red Connects to the power switch on the chassis front panel You may configure the way to turn off your system using the power switch refer to Chapter 2 BIOS Setup Power Management Setup for more information e SPEAK Speaker Orange Connects to the speaker on the chassis front panel The system reports system startup status by is suing a beep code One single short beep will be heard if no problem is detected at system startup If a problem is detected the BIOS may issue beeps in different patterns to indicate the problem e HD Hard Drive Activity LED Blue Connects to the hard drive activity LED on the chassis front panel The LED is on when the hard drive is reading or writing data e RES Reset Switch Green Connects to the reset switch on the chassis front panel Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart e Cl Chassis Intrusion Header Gray Connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed This function requires a chassis with a chassis intrusion switch sensor The front panel design may differ by chassis A front panel module mainly consists of power BD ssi rese
38. or password for entering BIOS Setup and making BIOS changes When the Password Check item is set to System you must enter the supervisor password or user password at system startup and when entering BIOS Setup User Password When the Password Check item is set to System you must enter the supervisor password or user password at system startup to continue system boot In BIOS Setup you must enter the supervisor password if you wish to make changes to BIOS settings The user password only allows you to view the BIOS settings but not to make changes To clear the password press lt Enter gt on the password item and when requested for the password press lt Enter gt again The message PASSWORD DISABLED will appear indicating the password has been can celled 35 BIOS Setup 2 13 Save amp Exit Setup CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS I WIN Advanced BIOS F Save to CMOS and EXIT Y N Y ord Integrated Periphe Power Management Setup Save amp Exit Setup PnP PCI Configurations Exit Without Saving PC Health Status ESC Quit Tl gt lt Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Exit Setup F12 Load CMOS from BIOS SEA DEIC KOM OVLON Press lt Enter gt on this item and press the lt Y gt key This saves the changes to the CMOS and exits the BIOS Setup program Press lt N gt or lt Esc gt to return
39. ore clock The adjustable range is from 200 MHz to 2000 MHz This item is configurable only when the VGA Core Clock control option is set to Manual CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU The adjustable range is dependent on the CPU being used CPU NorthBridge Freq Allows you to alter the North Bridge controller frequency for the installed CPU The adjustable range is dependent on the CPU being used Core Performance Boost Allows you to determine whether to enable the Core Performance Boost CPB technology a CPU performance boost technology Default Enabled CPB Ratio Allows you alter the ratio for the CPB The adjustable range is dependent on the CPU being installed Default Auto Turbo CPB Allows you to determine whether to improve CPU performance Default Disabled CPU Host Clock Control Enables or disables the control of CPU host clock Auto default allows the BIOS to automatically adjust the CPU host frequency Manual allows the CPU Frequency MHz item below to be configurable Note If your system fails to boot after overclocking please wait for 20 seconds to allow for automated system reboot or clear the CMOS values to reset the board to default values CPU Frequency MHz Allows you to manually set the CPU host frequency The adjustable range is from 200 MHz to 500 MHz This option is configurable only when CPU Host Clock Control is set to Manual Important It is highly re
40. press 2 0 standard 1 x PCI slot South Bridge 6 x SATA 3Gb s connectors supporting up to 6 SATA 3Gb s devices Support for SATA RAID 0 RAID 1 RAID 10 and JBOD A USB South Bridge Up to 6 USB 2 0 1 1 ports 2 on the back panel 4 via the USB brackets connected to the internal USB headers Up to 8 USB 2 0 1 1 ports 4 on the back panel 4 via the USB brackets connected to the internal USB headers Etron EJ168 chip Up to 2 USB 3 0 2 0 ports on the back panel Only for GA 78LMT USB3 Only for GA 78LMT S2P Hardware Installation wee Internal Ale fil Connectors gt 1 x 24 pin ATX main power connector 1 x 4 pin ATX 12V power connector 6 x SATA 3Gb s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 2 x USB 2 0 1 1 headers 1 x serial port header 1 x clearing CMOS jumper SA Back Panel eis e Connectors 1 x PS 2 keyboard port 1 x PS 2 mouse port 1 x D Sub port 1 x DVI D port 2 x USB 2 0 1 1 ports 2 x USB 3 0 2 0 ports 4 x USB 2 0 1 1 ports 1 x RJ 45 port 3 x audio jacks Line In Line Out Microphone 1 0 Controller ITE 1T8720 chip Hardware Monitor o System voltage detection CPU System temperature detection CPU System fan speed detection CPU overheating warning CPU System fan fail warning CPU fan speed control
41. prevent hardware damage Locate the pin one of the CPU The CPU cannot be inserted if oriented incorrectly Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket Apply an even and thin layer of thermal grease on the surface of the CPU Do not turn on the computer if the CPU cooler is not installed otherwise overheating and dam age of the CPU may occur Set the CPU host frequency in accordance with the CPU specifications It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals If you wish to set the frequency beyond the standard specifications please do so according to your hardware specifications including the CPU graph ics card memory hard drive etc Installing the CPU A Locate the pin one denoted by a small triangle of the CPU socket and the CPU A Small Triangle Mark Denotes Pin One of the Socket AM3 Socket EE pF ogooGoooonno A Small Triangle Marking Denotes CPU Pin One AM3 AM3 CPU see T94 X4NSORXGH if aoueud any Seige 9700819262206 MWdI678O JV IZIVV Hardware Installation 10 1 4 Installing the Memory Read the following guideli
42. r only when you enter BIOS Setup After configuring this item set the password s under the Set Supervisor User Password item in the BIOS Main Menu gt gt Setup A password is only required for entering the BIOS Setup program Default gt gt System A password is required for booting the system and for entering the BIOS Setup program HDD S M A R T Capability Enables or disables the S M A R T Self Monitoring and Reporting Technology capability of your hard drive This feature allows your system to report read write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed Default Disabled Away Mode Enables or disables Away Mode in Windows XP Media Center operating system Away Mode allows the system to silently perform unattended tasks while in a low power mode that appears off Default Disabled Note This item is present only when you install a CPU that supports this feature BIOS Setup 28 lt Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup Disabled displays normal POST message Default Enabled lt gt Backup BIOS Image to HDD Allows the system to copy the BIOS image file to the hard drive If the system BIOS is corrupted it will be recovered from this image file Default Disabled lt gt Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card PCI Expr
43. r purchasing the op tional COM port cable please contact the local dealer Pin No Definition NDCD NSIN NSOUT NDTR GND NDSR NRTS NCTS NRI No Pin CO CO NI DM on wy PM 10 CLR_CMOS Clearing CMOS Jumper Use this jumper to clear the CMOS values e g date information and BIOS configurations and reset the CMOS values to factory defaults To clear the CMOS values place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds g Open Normal a Short Clear CMOS Values e Always turn off your computer and unplug the power cord from the power outlet before clear A ing the CMOS values e After clearing the CMOS values and before turning on your computer be sure to remove the jumper cap from the jumper Failure to do so may cause damage to the motherboard e After system restart go to B
44. rangais row Eroin Appendix 44
45. requirements it is recommended that a power supply that can withstand high power consumption be used 500W or greater If a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system ATX_12V1 E 2 Pin No Definition Cle j 1 GND ele 2 GND 2 4 3 12V ATX 12V 4 12v en ey S S SS ATX Pin No Definition Pin No Definition 1 3 3V 13 33V 2 33V 14 12V 3 GND 15 GND 4 5V 16 PS_ON soft On Off 5 GND 17 GND 6 5V 18 GND ri GND 19 GND 8 Power Good 20 5V 9 5VSB stand by 5V 21 5V 10 12V 22 5V 114 12V Only for 2x12 pinATX 23 5V Only for 2x12 pin ATX 12 3 3V Only for 2x12 pinATX 24 GND Only for 2x12 pin ATX Hardware Installation 14 3 4 CPU_FAN SYS_FAN Fan Headers 5 The motherboard has a 4 pin CPU fan header CPU_FAN a 3 pin system fan header SYS_FAN Most fan headers possess a foolproof insertion design When connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire The motherboard supports CPU fan speed control which requires the use of a CPU fan with fan
46. s the revision of the motherboard is 1 0 Check your motherboard revision before updating motherboard BIOS drivers or when looking for technical information Example Table of Contents GA 78LMT USB3 GA 78LMT S2P Motherboard Layout cccecssseeeeeeeeeeeeen 5 GA 78LMT USB3 GA 78LMT S2P Motherboard Block Diagram cccceeneeen 6 Chapter 1 Hardware Installation cccccsscsssssssssssssscssssssseessessseessessseesseseseesaseeseneas 7 Toy netalaton PRC CAUTION sicrrcricecnnn T 1 2 Product SpeciicalgiS sissscresienaoin a 8 1 3 Installing the CPU and CPU Coollet cccsssssessssssesssstssrsesssersesseissesaeen 10 t4 Installing the IWICIIONY iiadescszsecadensceeddsnscadcansneesnatesdacedsataatenssienncsonaseixaeeaassasnaee 11 1 5 Installing an Expansion Cand s s sccccccssncc cesuseevescenseaseue ensienasemaseaatentveacseraes 11 TO Back Panel Comm Clon S cssssana i 12 t7 Internal Connectors srcem sar oatceseceeseoaies 13 Chapter 2 BIOS Setup s iccesenstceitonssecessnsesendtandededenseenieianencaceboseadtandetedcaieoctbtendecsiwemersti 20 21 Stanup SCreeN esnie a iiaei a EREA SKENERA SENERE 20 2 2 The Main IG A sce strane eantectatindansevsaeisnetnunteesietannsheeentanetnaiaveemewtialchdaeekaeste 21 2 3 MB Intelligent Tweaker M I T oo cccccssssscsscscsessssscssssssssseessesesssesessesaseees 22 2 4 Standard CMOS Features sisssiiassivncupacnntdoacapncannnentavitvnwenneiusdvsattataeasnanseineupeds 26 2 5 Advanced
47. sable CPU Core 1 2 3 4 5 gt gt Auto Lets the BIOS to enable all CPU cores number of cores available depends on the CPU being used Default gt gt Manual Allows you to individually enable disable CPU Core 1 2 3 4 5 CPU core 0 This setting is fixed CPU Core 0 is always enabled CPU core 1 2 3 4 5 Enables or disables CPU Core 1 2 3 4 5 Default Enabled Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives Use the up or down arrow key to select a hard drive then press the plus key lt gt or lt PageUp gt or the minus key lt gt or lt PageDown gt to move it up or down on the list Press lt Esc gt to exit this menu when finished EFI CD DVD Boot Option Set this item to EFI if you want to install the operating system to a hard drive larger than 2 2 TB Make sure the operating system to be installed supports booting from a GPT partition such as Windows 7 64 bit and Windows Server 2003 64 bit Auto lets the BIOS automatically configure this setting depending on the hard drive you install Default Auto First Second Third Boot Device Specifies the boot order from the available devices Use the up or down arrow key to select a device and press lt Enter gt to accept Options are LS120 Hard Disk CDROM ZIP USB FDD USB ZIP USB CDROM USB HDD Legacy LAN Disabled Password Check Specifies whether a password is required every time the system boots o
48. sion status and the Case Opened field will show No at next boot Default Disabled lt gt Case Opened Displays the detection status of the chassis intrusion detection device attached to the motherboard Cl header If the system chassis cover is removed this field will show Yes otherwise it will show No To clear the chassis intrusion status record set Reset Case Open Status to Enabled save the settings to the CMOS and then restart your system 33 BIOS Setup lt gt Current Voltage V Vcore DDR3 1 5V 3 3V 12V Displays the current system voltages lt gt Current System CPU Temperature Displays current system CPU temperature lt Current CPU SYSTEM FAN Speed RPM Displays current CPU system fan speed lt gt CPU Warning Temperature Sets the warning threshold for CPU temperature When CPU temperature exceeds the threshold BIOS will emit warning sound Options are Disabled default 60 C 140 F 70 C 158 F 80 C 176 F 90 C 194 F lt CPU SYSTEM FAN Fail Warning Allows the system to emit warning sound if the CPU system fan is not connected or fails Check the fan condition or fan connection when this occurs Default Disabled lt CPU Smart FAN Control Enables or disables the CPU fan speed control function Enabled allows the CPU fan to run at different speed according to the CPU temperature You can adjust the fan speed with EasyTune based on system requirements If disabled the CPU fan runs at full speed
49. t a certified computer technician Hardware Installation 1 2 Product Specifications CPU AM3 Socket AMD AM3 processor AMD AM3 Phenom II processor AMD Athlon II processor Go to GIGABYTE s website for the latest CPU support list Hyper Transport lt gt 5200 MT s Y Bus O chipset North Bridge AMD 760G x South Bridge AMD SB710 Memory 2x 1 5V DDR3 DIMM sockets supporting up to 8 GB of system memory Due to Windows 32 bit operating system limitation when more than 4 GB of physical memory is installed the actual memory size displayed will be less than 4 GB Dual channel memory architecture Support for DDR3 1333 O C 1066 800 MHz memory modules Go to GIGABYTE s website for the latest supported memory speeds and memory modules A Onboard Graphics North Bridge 1 x D Sub port 1 x DVI D port supporting a maximum resolution of 1920x1200 The DVI D port does not support D Sub connection by adapter Audio Realtek ALC889 codec High Definition Audio 2 4 5 1 7 1 channel To enable 7 1 channel audio you have to use an HD front panel audio module and enable the multi channel audio feature through the audio driver O LAN 1 x Realtek RTL8111E chip 10 100 1000 Mbit g Expansion Slots Storage Interface 1 x PCI Express x16 slot running at x16 1 x PCI Express x1 slot All PCI Express slots conform to the PCI Ex
50. t switch power LED hard drive activity LED speaker and etc When connecting your chassis front panel module to this header make sure the wire assignments and the pin assign ments are matched correctly Hardware Installation 16 7 F_AUDIO Front Panel Audio Header The front panel audio header supports Intel High Definition audio HD and AC 97 audio You may connect your chassis front panel audio module to this header Make sure the wire assignments of the module con nector match the pin assignments of the motherboard header Incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it For HD Front Panel Audio For AC 97 Front Panel Audio Pin No Definition Pin No Definition BRAN i 1 MIC2_L 1 MIC a 1 9 2 GND 2 GND I 3 MIC2R 3 MIC Power 4 ACZ DET 4 NC J 5 LINE2R 5 Line Out R 7 6 GND 6 NC 7 FAUDIO_JD 7 NC 2 8 NoPin 8 NoPin 9 LINE2 L 9 Line Out L 10 GND 10 NC CQ The front panel audio header supports HD audio by default e Audio signals will be present on both of the front and back panel audi
51. tions PCI1 IRQ Assignment Item Help Menu Level gt TL2 gt lt Move Enter Select PU PD Value F10 Save ESC Exit F1 General Help F5 Previous Values F6 Fail Safe Defaults F7 Optimized Defaults lt PCI1 IRQ Assignment gt Auto BIOS auto assigns IRQ to the first PCI slot Default gt 3 4 5 7 9 10 11 12 14 15 Assigns IRQ 3 4 5 7 9 10 11 12 14 15 to the first PCI slot 2 9 PC Health Status CMOS Setup Utility Copyright C 1984 2011 Award Software PC Health Status Hardware Thermal Control Enabled Item Help Reset Case Open Status Disabled Menu Level gt Case Opened No Vcore 1 280V 1D D Seas 1 616V 3 3V 3 296V 12V 12 365V Current System Temperature 41 C Current CPU Temperature SDC Current CPU FAN Speed 1264 RPM Current SYSTEM FAN Speed 0 RPM CPU Warning Temperature Disabled CPU FAN Fail Warning Disabled SYSTEM FAN Fail Warning Disabled CPU Smart FAN Control Enabled CPU Smart FAN Mode Auto TL gt lt Move Enter Select PU PD Value F10 Save ESC Exit F1 General Help F5 Previous Values F6 Fail Safe Defaults F7 Optimized Defaults lt gt Hardware Thermal Control Enables or disables the CPU overheating protection function When enabled the CPU core voltage and ratio will be reduced when the CPU is overheated Default Enabled Reset Case Open Status Keeps or clears the record of previous chassis intrusion status Enabled clears the record of previous chassis intru
52. to the BIOS Setup Main Menu 2 14 Exit Without Saving CMOS Setup Utility Copyright C 1984 2011 Award Software MB Intelligent Tweaker M I T Load Fail Safe Defaults Standard CMOS I WIN Advanced BIOS F Quit Without Saving Y N N ord Integrated Periphe Power Management Setup Save amp Exit Setup PnP PCI Configurations Exit Without Saving PC Health Status ESC Quit TL7 Select Item F11 Save CMOS to BIOS F8 Q Flash F10 Save amp Exit Setup F12 Load CMOS from BIOS Abandon all Data Press lt Enter gt on this item and press the lt Y gt key This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS Press lt N gt or lt Esc gt to return to the BIOS Setup Main Menu BIOS Setup 36 e Before installing the drivers first install the operating system EB e After installing the operating system insert the motherboard driver disk into your optical drive The driver Autorun screen is automatically displayed which looks like that shown in the screen shot below If the driver Autorun screen does not appear automatically go to My Computer double click the optical drive and execute the Run exe program After inserting the driver disk Xpress Install will automatically scan your system and then list all the drivers that are recommended to install You can click the Install All button and Xpress Install will install all the rec ommended drivers Or click Install Single Items to manu
53. ts The settings in this submenu are synchronous to those under the same items on the MB Intelligent Tweaker M I T main menu lt gt AMD C1E Support Enables or disables the C1E CPU power saving function in system halt state When enabled the power consumption will be reduced during system halt state gt gt Auto If a CPU that supports hardware C1E is installed the BIOS will automatically enable the hardware C1E function If not the C1E function will be disabled Default gt Enabled If a CPU that supports hardware C1E is installed the BIOS will automatically enable the hardware C1E function If not the BIOS will enable the software C1E function gt gt Disabled Disables the C1E function gt Virtualization Virtualization allows a platform to run multiple operating systems and applications in independent parti tions With virtualization one computer system can function as multiple virtual systems Default Disabled Note This item is present only when you install a CPU that supports this feature 27 BIOS Setup AMD K8 Cool amp Quiet control gt gt Auto Lets the AMD Cool n Quiet driver dynamically adjust the CPU clock and VID to re duce heat output from your computer and its power consumption Default gt Disabled Disables this function CPU Unlock Allows you to determine whether unlock hidden CPU cores Default Disabled CPU core Control Allows you to determine whether to manually enable di
54. tup 26 The following fields display your hard drive specifications If you wish to enter the parameters manually refer to the information on the hard drive gt gt Capacity Approximate capacity of the currently installed hard drive Halt On Allows you to determine whether the system will stop for an error during the POST Options are All Errors No Errors All But Keyboard Default Memory These fields are read only and are determined by the BIOS POST 2 5 Advanced BIOS Features CMOS Setup Utility Copyright C 1984 2011 Award Software Advanced BIOS Features IGX Configuration Press Enter AMD CIE Support Virtualization AMD K8 Cool amp Quiet control CPU Unlock amp CPU core Control ae O ed Oreos non X CMU Gore II x CPU core OC x CUT BO x CAU eog NAH ERU 5 Oo Hard Disk Boot Priority EFI CD DVD Boot Option First Boot Device Second Boot Device Third Boot Device Password Check HDD S M A R T Capability Away Mode Full Screen LOGO Show Backup BIOS Image to HDD Init Display First Tl gt lt Move Enter Select F5 Previous Values lt IGX Configuration Auto Menu Level gt Disabled Auto Disabled Auto Enabled Enabled Enabled Enabled Enabled Enabled Press Enter Auto Hard Disk KODOVI USB HDD Setup Disabled Disabled Enabled Disabled PCI Slot PU PD Value F10 Save ESC Exit F1 General Help F6 Fail Safe Defaults F7 Optimized Defaul
55. tup 30 lt Onboard USB 3 0 Controller Etron EJ168 USB Controller Enables or disables the Etron EJ168 USB controller Default Enabled lt USB Controllers Enables or disables the integrated USB controllers Default Enabled Disabled will turn off all of the USB functionalities below lt USB Legacy Function Allows USB keyboard to be used in MS DOS Default Enabled lt USB Storage Function Determines whether to detect USB storage devices including USB flash drives and USB hard drives during the POST Default Enabled lt Onboard Serial Port Enables or disables the first serial port and specifies its base I O address and corresponding interrupt Options are Auto 3F8 IRQ4 default 2F8 IRQ3 3E8 IRQ4 2E8 IRQ3 Disabled Only for GA 78LMT USB3 2 7 Power Management Setup CMOS Setup Utility Copyright C 1984 2011 Award Software Power Management Setup ACPI Suspend Type S3 STR Item Help Soft Off by Power button Instant off Menu Level gt T gt Move USB Wake Up from S3 Modem Ring Resume PME Event Wake Up HPET Support Power On By Mouse Power On By Keyboard lt KB Power ON Password AC Back Function Power On by Alarm c Date of Month lt Resume Time hh mm ss ErP Support F5 Previous Values Enter Select F6 Fail Safe Defaults Enabled Disabled Enabled Enabled Disabled Disabled Enter Soft Off Disabled Everyday 0 0 0 Disabled PU PD Value F
56. ve B Configuring SATA controller mode in BIOS Setup Make sure to configure the SATA controller mode correctly in system BIOS Setup For the BIOS Setup menus refer to Chapter 2 BIOS Setup Integrated Peripherals 37 BIOS Setup Steps 1 Turn on your computer and press lt Delete gt to enter BIOS Setup during the POST Power On Self Test Ensure OnChip SATA Controller is enabled under Integrated Peripherals To enable RAID for the SATA2_0 1 2 3 connectors set OnChip SATA Type to RAID To enable RAID for the SATA2_4 5 connec tors set OnChip SATA Type to RAID and set OnChip SATA Port4 5 Type to As SATA Type 2 Save changes and exit BIOS Setup The BIOS Setup menus described in this section may differ from the exact settings for your moth EB erboard The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version C Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array After the POST memory test begins and before the operating system boot begins look for a message which says Press lt Ctrl F gt to enter RAID Option ROM Utility Press lt Ctrl gt lt F gt to enter the RAID BIOS setup utility To create a new array press lt 2 gt to enter the LD View LD Define Menu window To create an array press lt CtrltC gt to access the LD Define Menu In the LD Define Menu use the up or down arrow key to move to an item for further confi
57. y standard Part 2 apparatus Industrial environment Limits and methods of measurement O EN 55014 2 Immunity requirements for household of radio disturbance characteristics of fluorescent lamps and luminaries appliances tools and similar apparatus Immunity from radio interference of O EN 50091 2 EMC requirements for uninterruptible broadcast receivers and associated power systems UPS equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Cabled distribution systems Equipment for receiving and or distribution from sound and television signals EC conformity marking The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with the LVD Directive 2006 95 EC Safety requirements for mains operated amp EN 60950 Safety for information technology equipment electronic and related apparatus for including electrical business equipment household and similar general use Safety of household and similar O EN 50091 1 General and Safety requirements for electrical appliances uninterruptible power systems UPS Manufacturer Importer Signature Timmy Huang Stamp Date Mar 1 2011 Name Timmy Huang DECLARATION OF CONFORMITY Per FCC Part 2 Section 2 1077 a Responsible Party Name G B T INC U S A Address 17358 Railroad Street City of Industry CA 91748 Phone Fax No 818

Gigabyte GA-78LMT-S2P motherboard

Contents

Download Pdf Manuals

Related Search

Related Contents