Posiflex PD-2800UN
Contents
1. 5 VDC 1A ENVIRONMENTAL Operating temperature 0 to 40 C Storage temperature 20 to 70 C Operating humidity 20 to 85 non condensing Storage humidity 5 to 90 non condensing WARNING If the user opens the pole display housing to make any modification all product warranty will be void NOTE Please refer to Posiflex Product Information CD or DVD or visit our web http www posiflex com tw for further information when needed POSIFLEX 131454 Sigh FUE gt YE a A B AMANT Ae ee Page 6 SERIE ASH2. POSIFLEX PD 2800 320 Series User s Manual Rev AO FCC Notes This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference Warranty Limits Warranty terminates automatically when any person other than the authorized technicians opens the machine The user should consult his her dealer for the problem happened Warranty voids if the user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused by improper application About This Manual Posiflex has made every effort for the accuracy of the content in this manual However Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein nor for direct indirect incidental consequential or otherwise damages including without limitation loss of data or profits resulting from
3. S driver or the JPOS Java POS driver would be required for OPOS or JPOS programs and the PD 2800 320 would have to be set into Epson command mode These drivers are available from our web page http www posiflex com tw Download 20list asp Status 1 amp Series_Name U POS amp Model_Name OPOS and execute the file SETUP EXE to install the OPOS Control Manager To add the customer display under OPOS control please set in OPOS Control Manager device name PD2x Line Display in the top row Select USB in third row as in the right sample picture below Please visit our web site and find the driver from the class PD23_26U The guidance for each function call in the library USBPD dIll is covered in the ReadMe file in that class For more information about driver installation please contact your local dealer or authorized technician SPECIFICATION OPTICAL Number of digits 20 digits row 2 rows Dot matrix 5 X 7 dots Digit height 9 03 mm PD 2800 9 66 mm PD 320 Digit width 5 25 mm PD 2800 6 0 mm PD 320 Display color Blue or Green for PD 2800 Dark Blue character with yellow background for PD 320 Page 5 MECHANICAL Total Height PD 2800 320 395 265 mm Total Width PD 2800 320 200 mm Total Depth PD 2800 320 116 mm Display Head Height 58 5 mm Display Head Width 200 mm Display Head Depth 56 5 mm Case color Black or Ivory ELECTRICAL Power from interface port of POS terminal
4. dow in the right side of display head Slide the display head to right then you can find 6 positions of DIP switches in this window Please use a tiny stick to adjust for the appropriate command mode used by the application program according to below table Switch position counts from left to right and ON means pushed up as indicated in the right part picture below DIP Switch Window F stich Position z Command Mode ON OFF OFF ON OFF OFF ADM ON OFF ON ON OFF OFF Aedex ON OFF ON OFF OFF OFF Epson ON OFF OFF ON ON OFF Futaba ON OFF ON OFF ON OFF Noritake ON OFF ON ON ON OFF UTC The default command mode is set to Noritake mode for normal delivery Please change it to Epson mode if OPOS or UPOS driver is used for the application program USING THE PD 2800 COMMAND MODE SELECTION GUIDE The below table provides some comparison for selection on command mode to be used in the application program if it is not yet determined Cursor Default mode Page 4 2 chars PT Brightness control NO NO YES YES YES YES DP Leading code change NO YES NO YES YES YES PT Code page select NO NO YES YES YES YES Auto scroll message NO NO NO YES YES YES PT Timer clock NO NO YES NO NO YES PT User defined font N A N A 2 chars N A 2 chars DRIVER INSTALLATION The OPOS OLE PO
5. n to right or left as well as front rear adjustable degree from 15 or 23 Picture D there are two plates in the bottom of customer display which can use for Velcro and provides more stable without screws fixed The Velcros are come with PD 2800 320 and in the carton INSTALLATION FOR REAR BASE MOUNT MODEL For this type mechanical design of rear base mount pole display it needs to assemble with any a host system For base stand of host system it only suit for Posiflex Gen 1 base and which will show in the following steps Please follow the instruction to assemble this customer pole display Step 1 Please pass the connecting cable through the hole which in the base metal plate Step 2 Hold the display with pole and aim to the base metal plate as well as let these four screw tubes join these holes which in the end of pole Please notice that the customer display face to the short side of metal plate Step 3 Turn the pole display and base stand upside down before combination Pass the cable through base stand and connect to the host system Step 4 Aim the hole which on the metal plate to the rubber foot on the Gen 1 base stand s bottom as show in the right picture Hold the system with customer display and turn them upside down to the regular position Page 3 PD 2800 COMMAND EMULATION MODE SETUP Now please check the back of PD 2800 display head as in the picture below There is a small DIP switch win
6. pective holders P N 19460902020 About PD 2800 320 The PD 2800 320 is a standalone pole mount customer display designed for discrete POS applications It delivered in separate carton for HT PB KS TP FT XP series and should be installing refer to the instruction which in this manual FEATURES PD 2800 is a bright two line VFD vacuum fluorescent display display with 20 characters per line and combines with green or blue filter PD 320 is a two line LCD display with 20 characters per line Stand along customer pole display for Posiflex POS terminals Easy to read large characters 9 03 mm x 5 25 mm for PD 2800 6 0 mm x 9 66 mm for PD 320 Long life and trouble free design Various command emulation modes selectable by DIP switch Support 12 Code Pages of 128 characters each on PD 2800 Support 12 international character sets of 12 characters each on PD 2800 USB interface with RS 232 emulation for numerous applications without modify the software UPOS 1 8 and is WEPOS ready supported Euro dollar sign supported in USA European font table Selectable command emulation modes including PST and EPSON command emulation modes for PD 320 Composed of several members in the family for versatile applications as tabulated below INSTALLATION GUIDES HOST SYSTEM PREPARAION The power of PD 2800 320 is supported through USB connection For PD 2800 320 customer display there are two USB connecter needs to link to the host
7. system Please confirm that both of these two USB connecters connect to terminal in order to support the power and data transmission Page 1 INSTALLATION FOR STAND ALONG MODEL For this type mechanical design of standalone customer pole display it can operate straight away and no needs to assemble with any other host system Nevertheless it also can fix on the counter or any place when it needs to be fixed Following pictures A to D will describe such as how to adjust the height of the pole and how to fasten the PD 2800 320 in a flat surface T l Te Zi ss a Picture A is going to describe how to adjust the height of customer displays a Please hold the compression lock by using thumb and index finger and pull out the lock b Please use another hand to hold the tube and extend to higher or lower of display s height After adjust to a satisfied height please push back the compress lock to fix the tube Page 2 Note Please align the compress lock and the grooves in order to fix the height of customer display Picture B is going to show how to screw PD 2800 320 in a flat surface In the base stand of PD 2800 320 there are two screws holes for user to fix the customer display Please choose a flat surface to fix the customer display in order to keep the PD 2800 320 stable The screws are come with PD 2800 320 and in the carton Picture C the display head of PD 2800 320 can move as horizontal directio
8. the furnishing performance or use of this material This information is provided as is and Posiflex Technology Inc expressly disclaims any warranties expressed implied or statutory including without limitation implied warranties of merchantability or fitness for particular purpose good title and against infringement The information in this manual contains only essential hardware concerns for general user and is subject to change without notice Posiflex reserves the right to alter product designs layouts or drivers without notification The system integrator shall provide applicative notices and arrangement for special options utilizing this product The user may find the most up to date information of the hardware from web sites http www posiflex com or http www posiflex com tw All data should be backed up prior to the installation of any drive unit or storage peripheral Posiflex will not be responsible for any loss of data resulting from the use disuse or misuse of this or any other Posiflex product All rights are strictly reserved No part of this documentation may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying or otherwise without prior express written consent from Posiflex Inc the publisher of this documentation Copyright Posiflex Technology Inc 2011 All brand and product names and trademarks are the property of their res
Download Pdf Manuals
Related Search