Da-Lite A101
Contents
1. Kit A105 1 Remove contents from carton and examine for damaged or missing parts See Figure 2 2 Drill a 3 16 diameter hole through the wall surface and into a stud to the depth of the screw length 3 Position the mount insert the screw and tighten until secure Use a flat washer where applicable Hollow Block Steel Stud Hardware Kit A109 1 Remove contents from carton and examine for damaged or missing parts See Figure 3 2 Drill a 3 4 diameter hole through the wall surface and into the structural part of the wall to accommodate the required fastener length 3 Fold the metal channel flat to the plastic straps and slide the channel through the hole in the wall Allow channel to unfold inside of the wall Make sure the channel is vertically positioned when used on steel studs Pull plastic loop toward yourself so channel is flush behind wall and slide cap down the plastic straps until cap is against the wall Break plastic straps off at the cap by placing thumb in between the straps and on the cap and sliding thumb side to side 4 Position the mount insert the screw and tighten until secure Use a flat washer where applicable Metal Joist Beam Hardware Kit A111 1 Remove contents from carton and examine for damaged or missing parts See Figure 4 2 Drill a 7 16 diameter hole through the steel base material 3 Position the mount insert the screw thread on nut and tighten until secure Us2. DA LITE SCREEN COMPANY INC 3100 North Detroit Street Post Office Box 137 Fax 574 267 7804 Warsaw IN 46581 0137 Phone 574 267 8101 800 622 3737 Made In The U S A 877 325 4832 www da lite com info da lite com Hardware Kits A101 A105 A109 A111 Form E 364 Rev 08 10 Caution These fasteners should be installed by qualified personnel into a surface that is capable of supporting a static load of four times the combined weight of the audio visual device and mount Do not attach to plaster paneling or drywall alone Required Tools 9 16 wrench Drill motor Drill bits Hammer Solid Concrete Hardware Kit A101 1 Remove contents from carton and examine for damaged or missing parts See Figure 1 Drill a 5 8 diameter hole into the concrete wall surface to the screw length Blow the hole clean of dust and debris A TEM PESCRIT ON DROP T3116 an Make sure the threaded cone is snug fia la 2 SCREW HHCS 3 8 16X 2 6 onto the anchor so that the cone will stay 4 es 3 WASHER FLAT 3 8 6 on the anchor during installation Insert 4 gt the anchor cone first into the hole and 3 tap it in place so that the top edge is flush with the concrete surface Position the mount and insert the screw to engage the cone and tighten the screw Figure 1 until secure The screw should engage a minimum of 2 3 of the threads Use a flat washer where applicable Wood Stud Hardware
3. e a flat washer where applicable ITEM DESCRIPTION 1 SCREW HEX LAG 3 8 16X 2 1 2 2 WASHER FLAT 3 8 Figure 2 ITEMDESCRIPTION oof fi 1 TOGGLER 3 8 16 2 SCREW HHCS 3 8 16X 2 3 WASHER FLAT 3 8 Figure 3 ITEM DESCRIPTION oo ofS 1 NUT HEX 3 8 16 2 SCREW HHCS 3 8 16X 2 3 WASHER FLAT 3 8 Figure 4 oo olf
Download Pdf Manuals
Related Search