SYBA SY-MRA55003 storage enclosure
Contents
1. HDD ROM 700L FREE SCREW LESS TRAY LESS MRA358 Manual An incredible 3 in 1 small multimedia storage solution MRA358 Features e Elegant aluminum design e Fits in any 5 25 drive bay Two USB 2 0 ports e Unique screwless design for hot swapping 2 5 SATA hard drive Accommodates 12 7mm slim optical drive Specifications e Fit all 2 5 Serial ATA hard disk Supports hot swap Supports SATA II 3 0Gb s e Housing Assembly 148mm W x136 4mm D x42mm H e Interface SATA or PATA for slim optical drive SATA for hard drive e Weight 626g Operating Temperature 0 55 C Package Content MRA358 1Pcs SATA data cable 1Pcs Elegant aluminum design Fan power amp access SATA cable 1Pcs Fits in any 5 25 drive bay Uesr manual 1Pcs Two USB 2 0 ports Unique screwless design for hot swapping 2 5 SATA hard drive Screws 3x6pwn 4Pcs Accommodates 12 7mm slim optical drive Screws 2x3pm 2Pcs Installation Push 12 7mm slim optical drive into the slim drive bay After pushing the slim optical drive into position to align with the front panel use a magnetic screwdriver to secure two screws to the optical drive Place MRA358 into an available 5 25 bay in the chassis and secure with screws 1 Insert the SATA 15P CONN Into 2 Insert one end of the SATA 7P Connection the MRA358 s 15P conn connect the big power 4P connector to the PC s 4P power plug and2. e the front panel 1 After inserting HDD and closing the front door carefully A push the tray until it is seated intoposition Excessive force may damage its mechanical parts 2 lf the HDD is inserted backward into the tray forcing the device may damage the MRA358 HDD ROM d
3. the small 4P LED wire connector to the 4P LED port at the back of MRA358 Power 15Pins cable to MRAMRA358 another Data 7Pins end 7P to either the mother board LED 4Pins or the SATA RAID card 3 Plug your optical drive s signal cable N Adapter SATA or PATA and power cable to your motherboard and power supply Power Supply to Motherboard 4 Plug USB 2 0 cable connector to your motherboard If your motherboard does not support USB 2 0 then you can use the alternate USB 2 0 connector instead for USB 2 0 operation only a Inserting the Hard Drive Removing the Hard Drive 1 Press the two bottons of HDD ROM gently to eject the panel 2 Open the front panel to take out the 2 5 hard drive and close the upper panel firmly 1 Do not eject the HDD while it is busy 2 Carefully take the HDD out from MRA358 HDD ROM The HDD can reach temperatures over 50 C It will not 1 Pull the two keys of HDD ROM gently from left to right to burn the fingers but should be handled with care eject the panel Statement The contents of user s manual are protected under copyright law Any organization or individual can not make copy and 2 Put the 2 5 HDD into the save it in the information bank or the retrieval system by any MRA358 method or form without the authorization of Wingsonic Wingsonic is not responsible for any loss in the process of using the HDD ROM 3 clos
Download Pdf Manuals
Related Search