SYBA SY-EXP20057
Contents
1. D to match your CD ROM drive letter 4 follow the on screen instructions to complete the installation To verify driver installation Click on the device manager tab in system propertis which you access from the windows control panel you should see a Fresco Logic xHCI usb3 Controller under the universal serial bus controllers iten2. Features and Benefits Fully compliant with ExpressCard Specification 1 0 ExpressCard 34 Form Factor Module Compliant with universal serial bus 3 0 specification revision1 0 Supports simultaneous operation of multiple USB 3 0 2 0 1 1 devices Supports USB data transfer rate of 1 5 12 480 5000 Mbps Hot swapping feature allows users to connect disconnect devices without powering down the system e Driver supports for Microsoft Windows 7 Vista XP 2000 Server 2003 and Server 2008 operation system Package Contents 1 x USB 3 0 1 Port ExpressCard 1 x Driver CD 1 x User Manual System Requirements Windows 7 Vista XP 2000 Server 2003 and Server 2008 ExpressCard enabled system with an available ExpressCard slot Hardware Installation General instructions for installing the card are provided below Since the design of system may vary refer to your system s reference manual for further information if needed Insert the Serial 1 Port ExpressCard into the ExpressCard slot of your system Make sure it is inserted all the way in for a solid connection Driver Installation For Windows 7 Vista XP 2000 Server 2003 and Server 2008 1 Please insert the CD driver bound with USB 3 0 1 Port ExpressCard into your CD ROM Drive 2 At the Windows desktop click Start then Run 3 Type D Fresco logic 3 0 98 11_WHQL 309811_32bit msi all 32bit system D Fresco logic 3 0 98 11_WHQL 309811_64bit msi all 64bit system then click OK Change
Download Pdf Manuals
Related Search