Addonics Compact RAID
Contents
1. A POEs User Guide Compact RAID CPR5SA www addonics com v5 1 11 Technical Support If you need any assistance to get your unit functioning properly please have your product information ready and contact Addonics Technical Support at Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query Enclosure Overview HDO HD4 Lock Mechanism Power LED HDO HD4 Button Functions A Push Open Button Press button for each drive slot to open the front HDD panel If the locking mechanism is set to LOCK position the button cannot be pressed Put the locking mechanism to UNLOCK position to be able to press the push open button and open the front HDD panel B Drive Activity LED Power LED Action Message Color Light On Power starting Blue Light On System is ready Purple Light Off Power is OFF No Drive Activity LED Light On Hard drive installed Blue Light Off Hard drive uninstalled No Light On Hard drive fail Red Flash Hard drive access Blue Power Switch A Power switch Buzzer disable button a Buzzer disable press button less than 2 seconds b Power switch press button over 2 seconds B Reset Device Change Mode button a Reset Device press button less than 2 seconds b Change Mode press button over 2 seconds www addonics com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com su2. g the provided eSATA to eSATA cable connect one end to the eSATA port on the RAID box and the other end to the eSATA controller card Press the power switch button for more than 2 seconds Wait for power LED status to change from starting to ready Press the Change mode button for more than 2 seconds This will DIP Switch 1 2 ON ON ON ON ON OFF ON OFF OFF ON OFF ON OFF OFF OFF OFF configure the raid volume Navigate to the Disk Management utility to configure the drives RAID Monitoring LED RAID Status RAID 10 RAID 3 RAID 5 Clone JBOD Large RAID 0 www addonics com LED Indicator Access Rebuilding Access Rebuilding Access Rebuilding Access Clone Access Access Technical Support M F 8 30am 6 00pm PST Blue Flash Blue amp Red Flash Blue Flash Blue amp Red Flash Blue Flash Blue amp Red Flash Blue Flash Blue amp Red Flash Blue Flash Blue Flash OFF Phone 408 453 6212 Email www addonics com support query
3. pport query Power Switch Buzzer Disable Button Reset Device Change Mode Button RAID Setting Dip Switch eSATA Connection Power Connector Installation Guide 1 To open the front panel press the push open button 2 Slide the 2 5 SATA hard drive into the slot Push back the front panel Two Options for Setting RAID on the Compact RAID Box only select one option l Using the JMicron HW RAID Manager utility program For Windows users install the JMicron HW RAID Manager located on the SATA Controller CD In the CD go to RAID utilities gt JMB393 This manager can be used to create and monitor the status of the RAID volume Use the RESERVE DIP switch setting when using the JMicron HW RAID Manager www addonics com Technical Support M F 8 30am 6 00pm PST Phone 408 453 6212 Email www addonics com support query Il Using the onboard RAID DIP switch RAID Status RAID 0 RAID 10 stripped JBOD Large RAID 3 Clone RAID 5 RESERVED Normal a b e Note for the system to detect multiple individual drives the RAID box must be connected to a port multiplier compatible eSATA host controller If the RAID box is NOT connected to a port multiplier compatible eSATA host controller the system will only detect one drive and that is the hard drive in slot HDO Individual drives Select the setting desired using the DIP switch table Usin
Download Pdf Manuals
Related Search