Draper 227222 mounting kit
Contents
1. off For dimensional drawings and hardware parts lists please see reverse side If you encounter any difficulty installing or servicing your Wall Brackets by Draper all your dealer or Draper Inc Spiceland Indiana 765 987 7999 or fax 765 987 7142 if polo LOL WU 411 S Pearl St Spiceland IN 47385 USA I 765 987 7999 www draperinc com I fax 765 987 7142 Copyright 2008 Draper Inc Form WallBrackets_InstO8 Re2Printed in U S A 10 or 14 non adjustable Extension Brackets Attach eye bolts to brackets First fully seat the flanged nut onto the eye bolt Then place a nut in the countersunk hole in the bracket and screw in the eye bolt Please Note Make sure flanged nut is fully tightened against the wall bracket but be careful not to overtighten Measure distance between mounting holes on the screen and mark the bracket locations on the wall Mount brackets to wall For 10 extension from wall install with the long end against the wall For 14 extension from wall install with short end against the wall Please Note It is the responsibility of the installer to ensure that appropriate hardware is used The maximum diameter fastener that should be used to attach to the wall is 5 6 Suspend the screen from the eye bolts with S hooks Crimp both ends of the S hooks so the screen cannot come off Please note Whe2. parts lists please see reverse side Wall Brackets by Draper www draperinc com DRADER 765 987 7999 Wall Brackets Dimensions 61 2 Make sure to use provided s washers to prevent y incorrect hardware or overtightening from cracking the l bracket 14 Shortest Arm Longest Arm to Wall to Wall 1814 24 ies 20 al Ca Oo Shortest Arm to Wall Longest Arm to Wall Hardware Please Note It is the responsibility of the installer to ensure that appropriate hardware is used The maximum diameter fastener that should be used to attach to the wall is 5 6 Page 2 of 2 Hardware Kit for 6 Non adjustable and 10 amp 14 Non adjustable Extension Brackets 5 16 18 Nut 2 5 16 18 Flanged Nut 2 gt Eye bolt 2 S Hook 2 G Please Note When using S hooks to suspend screen from wall brackets be sure to crimp both ends of the S hooks for additional safety 3 8 washer 4 6 brackets only Hardware Kit for 1814 24 Adjustable and 20 Non adjustable Extension Brackets 1 4 20 x 11 4 Carriage Bolt 4 1 4 Washer 4 1 4 20 Wing Nut 4 7 5 16 18 Nut 2 5 16 18 Flanged Nut 2 gt Eye bolt 2 S Hook 2 G
3. Installation Instructions Wall Brackets by Draper Caution Do not overtighten bolts screws Overtightening could damage brackets For added safety crimp S hooks so the screen cannot come off Assembly hardware is included fasteners for attaching to wall are not included Maximum load for wall brackets is 75 Ibs installer is responsible for ensuring the mounting surface is adequate Installer is responsible for providing hardware appropriate to mounting surface and size and weight of screen 6 non adjustable Extension Brackets Attach eye bolts to brackets First fully seat the flanged nut onto the eye bolt Then place a nut in the countersunk hole in the bracket and screw in the eye bolt Please Note Make sure flanged nut is fully tightened against the wall bracket but be careful not to overtighten Measure distance between mounting holes on the screen and mark the bracket locations on the wall Mount brackets to wall Make sure to use provided s washers as shown above to prevent incorrect hardware or overtightening from cracking the bracket Please Note It is the responsibility of the installer to ensure that appropriate hardware is used The maximum diameter fastener that should be used to attach to the wall is 6 s washers are provided Suspend the screen from the eye bolts with S hooks Crimp both ends of the S hooks so the screen cannot come
4. n installing wall brackets flexible driver bit extensions may make it easier to accurately drive the fasteners into the mounting surface For dimensional drawings and hardware parts lists please see 18 4 24 adjustable or 20 non adjustable Extension Brackets LY amp eee m Attach Extension arms to wall brackets For 20 extension from wall attach extension arms to short ends of brackets For 1814 24 extension from wall attach extension arms to short ends of brackets Attach eye bolts to brackets First fully seat the flanged nut onto the eye bolt Then place a nut in the countersunk hole in the bracket and screw in the eye bolt Please Note Make sure flanged nut is fully tightened against the wall bracket but be careful not to overtighten Measure distance between mounting holes on the screen and mark the bracket locations on the wall Mount brackets to wall Please Note It is the responsibility of the installer to ensure that appropriate hardware is used The maximum diameter fastener that should be used to attach to the wall is he Suspend the screen from the eye bolts with S hooks Crimp both ends of the S hooks so the screen cannot come off Please note When installing wall brackets flexible driver bit extensions may make it easier to accurately drive the fasteners into the mounting surface For dimensional drawings and hardware
Download Pdf Manuals
Related Search