Zonet ZFS3316P network switch
Contents
1. network devices network enabled consumer devices other than computers like game console or switch hub to the LAN port of ZFS3316P with UTP STP Category 3 4 5 cables Troubleshooting 1 U1 B amp B W Check the power adapter and power wall jet to make sure they are function properly Check if the switch is turned ON and power LED is steady Check all cable connections between computer and the switch to make sure they are connected properly Maximum distance is 100 meters from the switch to end nodes Link LED s is ON flashing at the connected port s of the switch Test your computer s network adapter to make Sure it is installed and functioned properly Check issues such as network collisions domain limitations and other physical installation aspects Make sure they all meet IEEE standard network installation requirements more details can be found at www ieee org If problem still persists write down your software hardware configuration and LED error indications and contact your local retailer or the store purchased for further assistance2. Package Contents e One ZFS3316P e One Quick Installation Guide English e One Quick Installation Guide Spanish e One Power Adapter Front Panel e LED indicators LED Status Operation O Steady Network cable connected and connection LNK ACT Green established E Flash Data packets are transmitting Off Network cable is unplug e Diagram TAKE POWER 1X 2X 3X 4X SK 6X 7X 8X YOK 10K 11X 12X 13X 14K 15X 16X UUUUUHBUUBUDBUUOUDUUOOO 16 Port 10 100M Ethernet Switch ZFS3316P Rear Panel e 16 RJ 45 ports CIAL Co Side Panel e One Power Connector Caution e ZFS3316P must put on a surface that is able to hold at least 5kgs weight e Power adapter must be connected to the switch properly and securely e Suggested at least 10cm empty space around the unit for sufficient ventilation and cooling e Do not recommend to put any items on top of the switch e ZFS3316P is not ideally to work in a high electromagnetic environment under direct sunlight dust and vibrating surfaces e Maximum distance between the switch and the end node is 100 meters e Must use an unshielded or shielded twisted pair UTP STP Category 5 or better cables to ensure proper transmission e Loss of data packet may encounter when using cable other than Category 5 Installation Connect the power adapter to Connect all your computers the wall socket and then connect it to the Power socket of ZFS3316P
Download Pdf Manuals
Related Search