Home

Toshiba 32KV500B LCD TV

Contents

1. Channel Search First Time Installation Select Automatic Channel Scan from the Installation menu by using Up or Down buttons and press OK A screen will appear warning that previous digital programmes and settings will be deleted Select Yes and press OK to continue with the Auto tuning Do you want to start an automatic channel scan Your previous channel list will be replaced Yes No The television will start to search for all available stations You must allow the television to complete the search When the search is complete the Auto tuning screen will display the total number of services found After search is completed for digital channels a message asking whether to search for analogue channels appears on the screen Do you want to search for analogue channels Yes No Press the OK button to search for analogue channels The following menu appears on the screen for analogue channel search English 12 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inda 12 30 03 2011 14 36 16 Auto Tuning continea Manual Tuning The television can be tuned in manually using Manual Tuning feature PROGRAM TABLE gt Language Country TXT Language English PLEASE CHECK ANTENNA CABLE AUTO PROGRAMMING SYSTEM e Select your Country Language and Text language by using V or A and or P buttons Press OK or RED button to continue To cancel
2. iv intentional misuse of the product v use of the product in improper conditions vi loss and or damage caused to the product whilst in the possession of a third party vii any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal opera tion or misuse of the product Note A Toshiba wall bracket or stand where available must be used English 4 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inda 4 30 03 2011 14 36 07 Digital Switchover When does switchover happen Copeland switches on October 17 2007 z The exact date you switch depends on the transmitter you are served by To check when you switch go to Digital UK s postcode checker on www digitaluk co uk Check your ITV news service or look at Teletext Page 106 to see what TV region you re in Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending in 2012 television services in the UK will go completely d
3. 14 34 32 NL il 7 14 33 52 5 14 32 54 30 03 2011 14 36 20 Other Controls Your television has a list of other controls that function in accordance with your preferences Child Lock Panel Lock disables the buttons on the television All buttons on the remote control can still be used In the FEATURE menu select Child Lock and choose On or Off using Left or Right button e When Child Lock is On a reminder will appear when the buttons on the television are pressed If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control Default Zoom While zoom mode is set as AUTO the TV will set the zoom mode in accordance with the signal of the broadcast If there is no WSS or aspect ratio information the TV will then use this setting In the FEATURE menu select Default Zoom and choose Panoramic 16 9 4 3 or 14 9 using Left or Right button Blue Background If the signal is weak or absent the TV will automatically change to a blue screen To enable this set Blue Background to On In the FEATURE menu select Blue Background and choose On or Off using Left or Right button Menu Background You can set the menu transparency by using this feature Press Up or Down button to select Menu Background You can set menu background level by pressing Left or Right button In the FEATURE menu select Menu Background e Use Left o
4. Computer To Connect a Computer With either an RGB PC or an HDMI connection you can watch your computer s display on the television and hear the sound from the television s speakers When connecting a PC to the RGB PC terminal on thetele vision use an analogue RGB 15 pin computer cable anda PC audio cable for the AUDIO socket p ae Audio cable for PC to television connection not supplied RGB PC Cable not supplied B64 To use a PC set the monitor output resolution on the PC before connecting it to the television To display the optimum picture use the PC setting feature NOTE e The PC audio input terminal on the television is shared with the YPbPr and Side AV input terminal e Some PC models cannot be connected to this television An adaptor is not needed for computers with a compatible mini D sub15 pin terminal e Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multiangle scenes Connecting a USB Disk To Connect a USB Disk e You can connect a USB disk to your TV by using the USB input of the TV This feature allows you to display play music or photo files stored in a USB stick e Itis possible that certain types of USB devices e g MP3 Players may not be compatible with this TV e You may back up your file
5. L and R audio signals The Coaxial Audio Output socket enables the connection of If the television automatically switches over to monitor external a suitable surround sound system equipment return to normal television by pressing the desired NOTE This output is always active programme position button To recall external equipment press SOURCE button to switch between sources IMPORTANT Please do not connect a device to PC socket while using YPbPr input English 7 00_MB45M_ GB _3910UK_IDTV_SILVER8_2740W_ IB_INTERNET _16 9639 indd 7 30 03 2011 14 36 09 Connecting an HDMI or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device This input is designed to accept HDCP High Bandwidth Digital Content Protection programme material in digital form from EIA CEA 861 D compliant 1 consumer electronic devices such as a set top box or DVD player with HDMI or DVI output NOTE Some early HDMI equipment may not work properly with your latest HDMI TV Supported Audio format Linear PCM sampling rate 32 44 1 48kHz To Connect an HDMI Device Connect an HDMI cable type A connector to the HDMI ter minal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo Hi F e If your HDMI connection is ca
6. Program screen will appear on the screen Press the BLUE button to start APS PROGRAM TABLE gt Country WARNING All Prestored Programs will be deleted Press the Left or Right button to set the country e Press the BLUE button to cancel APS or the RED or OK button to start APS is running 132 00 MHz 10 Cancel You must allow the television to complete the search e When the search is complete the television will automatically select programme position 1 This may not be a clear picture or the signal may be weak so the station order can be changed using program table which will appear on the screen Press BACK to finish Sorting Programme Positions Analogue Channels may be moved and saved to the position of your choice Select Programme Table tab from the main analogue TV menu e With the list of channels showing use navigation buttons to highlight the channel you want to move and press GREEN button The selected channel will be highlighted with a frame Use navigation buttons move through the list to your preferred position As you do so the other channels will move to make room When finished press GREEN button to save your move English 14 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inda 14 30 03 2011 14 36 17 Stereo and Bilingual Transmissions and Channel List Stereo and Bilingual Transmissions For ATV programmes If
7. Sub 16 Pin Analogue RGB Signal Digital Audio Output S PDIFF USB Port Media Browser Interface Version USB 2 0 USB Class Mass Storage File System FAT32 Headphone Socket Dimensions approx Height dimension includes foot stand Weight approx Operating Conditions Supplied Accessories 3 5mm stereo 55cm H 78cm W 94cm D 11 5kg without stand 10 5kg Temperature 5 C 35 C 41 F 94 F Humidity 20 80 non condensing Remote Control 2 batteries AAA IEC r03 1 5V Cable Holder P Clip English 33 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 33 30 03 2011 14 36 23 License Information HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC DVB is a registered trademark of the DVB Project 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the television Cleaning the screen and cabinet Tum off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following information is only
8. Using Up or Down button highlight the required subject and press OK e Use the coloured buttons as instructed e To return to normal viewing press amp Analogue Text Services if available Before using the text services the required language region must be chosen Select TXT Language from the FEATURE menu e Press the Left or Right button to choose the required language region FEATURE off off English 16 9 Sleep Timer Child Lock Language Default Zoom Blue Background on Menu Background 0 Backlight Menu Timeout 60 sec TXT Language West Ext Out On Auto After the teletext language is selected press MENU button to exit Using Text Button amp To view text services press Press S again to superimpose text over a normal broadcast picture Pressing this button again will split the screen into two windows one displaying the teletext and the other displaying the current channel PAT Press amp again to return to normal viewing Programmes cannot be changed until text is cancelled The first text page shown will be the initial page Any text page can be accessed by entering the 3 digit page number using the numbered buttons pressing the coloured buttons or pressing to advance to the next page and to go back to the previous page Four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote c
9. screen Resolution Frequency Hor Ver Ver Hz KHz Hor Standard Supported Zoom Modes PIN Information Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Signal information for Mini D sub 15 pin connector Pin No Signal name Pin No Signal name Pin No Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H sync 4 NC 9 NC 14 V sync 5 NC 10 Ground 15 NC NC not connected English 30 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 30 30 03 2011 14 36 23 Appendix B AV and HDMI Signal Compatibility Input Signal Types Source Supported Signals Available PAL 50 60 EXT 1 NTSC 60 SCART RGB 50 RGB 60 ojojo EXT 1 S S VIDEO PAL 50 60 NTSC 60 4801 480P 576l 576P 720P 720P 10801 PAL 50 60 O 10801 1080P 1080P 4801 480P 576l 576P 720P 720P 10801 10801 1080P 1080P 1080P 1080P 1080P X Not Available O Available Note In some cases a signal on the LCD TV may not be displayed properly The problem may be an inconsistency with standards from the source equipment DVD Set top box etc If you do experience such a problem please contact your dealer and also the m
10. supplied cable holder as the following e Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above e Place cables into the cable holder after all necessary connections are made English 10 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ind 10 30 03 2011 14 36 15 Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side of the television Whilst all the necessary adjustments and controls for the television are made using the remote control the buttons on the right side of the television may be used for some functions On Off Ei Switch Menu OSD p g o a PICH TV AV O ean e l Volume Programme AV Standby Down Up Down Up Source Switching on If the standby LED is unlit check that the mains plug is con nected to the power and press the E button on the left side of the television to switch the television on Then the LED lights up white If the picture does not appear press 0 on the remote control it may take a few moments To put the television into Standby press 0 on the remote control To view the television press O again The pic ture may take a few seconds to appear Note The active Standby LED may appear for a few moments when the TV is switched off Note A
11. to the previous programme position press K SWAP Input Selection Use the Input Selection window if the television does not switch over to a connected source automatically Press SOURCE button on your remote control for directly changing sources Or select Source option from the main menu by using Left or Right button Use then Up or Down button to highlight an input and press Right button to select Note You can mark desired source options by pressing the OK button Therefore when SOURCE button is pressed only the marked source options will be available except for the TV source SOURCE TV DTV USB PC VGA English 20 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 20 30 03 2011 14 36 19 General Sound Controls You can set sound preferences of your TV Controlling Volume and Muting Sound Volume Press V or V to adjust the volume Sound Mute Press X once to turn the sound off and again to cancel Equalizer Settings You can customize current sound mode settings Select the appropriate mode in accordance with the installation location of the TV and adjust the equalizer on screen as desired Select the SOUND menu e Press Up or Down to highlight Equalizer and then press OK Q v SOUND Equalizer gt Preset 120 Hz 500 Hz 1 5 kHz 5 kHz 10 kHz Store e Press Left or Right button to change the preset In equalizer menu the preset c
12. view them Auto tuning will completely retune the television and can be used to update the channel list Press MENU button on the remote control unit e Select SETUP and then INSTALLATION option Select Automatic Search e A screen will appear warning that previous digital programmes and settings will be deleted e You must allow the television to complete the search e When the search is complete the Auto tuning screen will display the total number of service found NOTE Further detailed instructions on Auto tuning can be found in the TV owners manual If you are missing channels it may be that they are not available in your area or that your aerial needs upgrading If you have any further questions please contact your equipment supplier or call Digital UK on 08456 50 50 50 or visit www digitaluk co uk English 5 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_ NTERNET _16 9639 indd 5 30 03 2011 14 36 08 The Remote Control Simple at a glance reference of your remote control Standby mode Mono Stereo Dual l Il Image size Expand in TXT mode Digital Services Subtitle on off No function No function Green button Current language selection To select TV programme number To return to the previous programme Teletext Mix PAT Return Exit menu Menu on off OK Confirm Freeze picture in analoge TV mode Hold in TXT mode Favourite mode Navigatio
13. N key or cancel the process by pressing the RED button e You can edit the list via GREEN key and delete with the RED button Sleep Timer Analogue The television can be set to turn itself Off after a certain length of time e When displaying analogue TV menu use Left or Right button to select FEATURE menu e Press Up or Down button to select Sleep Timer Use Left or Right button to set the desired time The timer can be programmed between Off and 120 minutes in steps of 10 minutes If Sleep Timer is activated at the end of the selected time the TV goes automatically to standby mode Conditional Access The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For more information see a service provider Insert the CAM and card into the Common Interface Slot following the instructions provided with the CAM e Press the MENU button to display the main menu and use the Y or A button to highlight the Conditional Access line and press the OK button Conditional Access Important Switch off the TV and unplug from the mains e The CAM should be correctly inserted it is impossible to insert fully if reversed The CAM or the TV terminal may be damaged if the CAM is forcefully inserted Connect the TV to the ma
14. TION menu press the Down button until V Position is highlighted Press the Left or Right button to adjust the value Dot Clock Dot Clock adjustment corrects interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts In the PC POSITION menu press the Down button until Dot Clock is highlighted Press the Left or Right button to adjust the value Phase Depending on the resolution and scan frequency that you input to the TV Set you may see a hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method In the PC POSITION menu press the Down button until Phase is highlighted Press the Left or Right button to adjust the value Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts In the PC POSITION menu press the Down button until Dot Clock is highlighted Press the Left or Right button to adjust the value PC Picture controls Contrast Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu When Colour Temp is Manual you can also adjust the R G B items R G and B adjust the TV image colour in PC RGB mode You can change the TV colour to your desired colour R Red G Green B Bl
15. TOSHIBA Leading Innovation gt gt gt 32KV500B gt REMEMBER BO IF YOU ARE EXPERIENCING ANY DIFFICULTIES PLEASE VISIT WWW TOSHIBA CO UK FAQ OR CONTACT THE TOSHIBA CUSTOMER HELPLINE ON 0844 856 0730 Full Warranty Terms and Conditions available at http wnuw toshiba co uk te dvd support OWNER S MANUAL Contents Safety Precautions ccceeeeeeeessssseeeeeeeeeeees 3 Air Circulation ceceeeeeeeeeeeeeeesseneeeeeeeees 3 Heat DaMaGe cccceeseeeseeeseeeeeseeeeeeeeeenenes 3 Mains Supply ii iiccesscceseccceedcsisvacsveedeseebacess 3 Warning weve ceteceesecatecceesecersteccustaesedseeceear 3 DOi crete E anectatvutvacds og aacantess 3 DO NOEs ert perineen tenaa a aE 3 Installation and Important Information 4 EXCLUSION CLAUSE 4 Digital Switchover ssssssssesessrerrrrrrrrnrrrrssense 5 Inserting Batteries and Effective Range of the Remote Control ssssssssssssessssrrrrrrrrnenes 6 To Connect an HDMI Device 8 To Connect a DVI Device 0 eeeeeeeeeeeeeeeeees 8 To Connect a Computer eeeeeeeeeeeeeeeeeees 9 To Connect a USB Disk seernes 9 USB Memory Connection sesser 9 Environmental Information 0 005 10 Using the Cable Holder eeen 10 Switching ON eeeeeeeeeetetteteeeeeeeeeeeeeeeeees 11 Using the Remote Control seese 11 Using the Controls and Connections on the Mrmr ea a a naai 11 Auto TUNING sssssesssrsnssssrrrnnunrrnrnnnnrrnnneenn 12 Digital Manual Tuning cceeeeeee
16. adjust until the picture clears a Subtitles are not currently being transmitted by the broadcaster The programme is currently being broadcast with an English soundtrack only The digital programme being viewed is not broadcasting digital text Try another digital programme a The channel has been selected in the locked programmes list English 36 00_MB45M_ GB _3910UK_IDTV_SILVER8_2740W_ IB_INTERNET _16 9639 indd 36 30 03 2011 14 36 23 TOSHIBA Television Central Europe Sp z 0 0 All rights reserved Reproduction in whole or part without written permission is strictly prohibited TOSHIBA Television Central Europe Sp z 0 0 ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland Specification is subject to change without notice
17. an be changed to Music Movie Speech Flat Classic and User Select the desired frequency by pressing Up or Down button and increase or decrease the frequency gain by pressing Left or Right button e Press the MENU button to return to the previous menu Note Equalizer menu settings can be changed only when the Equalizer Mode is in User English 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ind 21 Balance This setting is used for emphasizing left or right speaker balance e Press Up or Down button to select Balance e Press Left or Right button to change the level of the balance Balance level can be adjusted between 32 and 32 Headphone Volume This setting is used to set the sound output when headphones are connected e Press Up or Down button to select Headphone Press Right button to view the headphone menu e Press Up or Down button to select Volume Press Right button to increase headphone volume level Press Left button to decrease headphone volume level Headphone volume level can be adjusted between 0 and 63 Sound Mode This setting is used to select the sound mode of your television e Press Up or Down button to select Sound Mode e Using Left or Right button you can select Mono Stereo Dual or Dual II mode only if the selected channel supports that mode AVL Sometimes there can be large changes in volume when switching from a DTV 5 1ch to a DTV 2ch an ATV ch
18. annel or an external input Using the AVL feature reduces these volume differences e Inthe SOUND menu press Up or Down to highlight AVL e Press Left or Right button to set AVL as on or off 21 30 03 2011 14 36 19 Picture Controls Most of the picture controls and functions are available in both digital and analogue modes Picture Mode This television offers the choice of personalising the picture style Cinema Dynamic and Natural are preset options and affect settings within the television In the PICTURE menu press Up or Down to select Mode Press Left or Right to select the picture mode you prefer Picture Adjustments You can customize current picture mode settings as desired For example you change items such as Brightness Contrast Colour Sharpness and Hue In the PICTURE menu press Up or Down button to select the desired option Contrast Brightness Sharpness Colour 40 Colour Temp Normal Noise Reduction Low Game Mode off Picture Zoom Auto Store No Signal Press Left or Right button to set the level Note Hue option can only be visible when the TV receives an NTSC signal Colour Temperature Colour Temperature increases the warmth or coolness of the picture by increasing the red or blue tint In the PICTURE menu press Up or Down to select Colour Temp Press Left or Right to choose from one of these options Cool Normal and Warm No
19. anufacturer of the source equipment ojolololjoliolojoiolololololiololololololojojolojlojlo English 31 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 31 30 03 2011 14 36 23 Appendix C Supported File Formats for USB Mode File Extension Format Remarks Video Audio Maximum resolution Bit rate etc mp3 MPEG 1 2 Layer 1 2 3 MP3 Sample Rate 8K 48KHz Bit Rate 64K 320Kbps Baseline JPEG WxH 8902x8902 up to 77Mega pixel Support format 444 440 422 420 Grayscale Progressive JPEG English 32 Up to 4 Mega pixel Support format 444 440 422 420 Grayscale 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 32 30 03 2011 14 36 23 Specifications and Accessories DVB T Broadcast Systems Channels UK UHF 21 58 Video Input Stereo Nicam Broadcast Systems Channels PAL I UK21 UK69 PAL SECAM NTSC 4 43 Visible Screen Size approx 32 81cm Display 16 9 Sound Output at 10 distortion Main 6W 6W Power Consumption approx 32 150W Standby Power Consumption approx 0 9W External Connections SCART Input 21 pin SCART RGB A V YPbPr Input Phono Jacks Y PB CB PP CR Phono Jacks Audio L R FAV Input Side Phono Jack Video Phono Jacks Audio L R HDMI 1 2 Input HDMI Enable Content Type INSTAPORT RGB Range supported PC Input Mini D
20. beeping sound will be heard when the buttons are pressed This is normal operation not a fault For energy saving Turning the television off at its mains supply or un plugging it will cut energy use to nearly zero for all televisions This is recommended when the televi sion is not being used for a long time e g when on holiday Reducing the brightness of the screen will reduce energy use Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills NOTE Putting the television into standby mode will reduce energy consumption but will still draw some power Using the Remote Control Press the MENU button on the remote control to see the menus In analogue TV mode the menu appears as a group of icons each for a menu option Press the Left or Right button to select a topic In digital TV mode the menu appears as a list Press the Up or Down button to select a topic To use the options press the Up and Down buttons on the remote control to move up and down through them and OK Left or Right buttons to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout the manual Using the Controls and Connections on the TV Using the control buttons on the front of the TV To alter the volume press a To alter the programme position press P CH on the right side of the TV Press lt 1 buttons at the same to view main m
21. by pressing Left or Right buttons Subtitle if subtitle is backed up alter the subtitle language with Left or Right buttons The chosen language will be seen in subtitles English 17 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 17 30 03 2011 14 36 18 Digital Settings Parental Control Menu Lock Set PIN You can view or set parental preferences of your TV Viewing Parental Control Menu e While in DTV mode press MENU to view main menu Select Setup from the list and press OK button Setup Configuration Language Installation Select Configuration by using Up or Down button and press OK Select Parental Control by using Up or Down button and press OK A dialogue box asking for the lock key will be displayed The default key is set to 0000 Enter thePIN e If itis incorrect Wrong Pin OSD will be displayed If it is correct the Parental Control menu will be displayed Parental Control Disabled Menu lock Set PIN Menu Lock In menu lock you can set locking for all menus or the Installation Menu to restrict access to these menus If the menu lock is disabled there will be free access to the menu system Use Up or Down buttons to go to Menu Lock option Use Left or Right buttons to choose Menu Lock Mode DISABLED All menus are unlocked ALL MENUS All Menus are accessible only with the correct lock key So the user cannot add
22. cated in the Feature menu If you set Power Save Mode as On the TV will switch to energy saving mode and luminance level of TV set will be decreased to optimum level Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode Power Save Mode On When the TV is not in use please switch off or disconnect the TV from the mains plug This will also reduce energy consumption Disconnect power when going away for longer time e Note that annually using the TV set in Power Save Mode has more power efficiency than disconnecting the TV from the mains plug instead of keeping stand by mode Therefore disconnect the TV from the mains plug to save energy when you do not use However it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption e Please helps us to save environment by following these steps Repair Information Please refer all servicing to qualified personnel Only qualified personnel must repair the TV Please contact your local dealer where you have purchased this TV for further information Using the Cable Holder v LJ Di MM Wavnomaamnaeaaumnnunvvnanioevnaenoavanna aea N 7 CHOC nea Na THA HAN HULA LLU Re monn C0 NAAN NNN HNN JINDON IONDNEAIDANON OVANA DODENONIA VVV VODAN ON n r a CE re on You can use the
23. ccur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity or locations where the temperature is likely to fall below 5 C 41 F Mains Supply The set should be operated only from a 220 240 V AC 50 Hz outlet DO ensure that the television is not standing on the mains lead DO NOT cut off the mains plug from this equip ment this incorporates a special Radio Interference Filter the removal of which will impair its performance In the UK the fuse fitted in this plug is approved by ASTA or BSI to BS1362 It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Warning To prevent the spread of fire keep candles or other open flames away from this product at all times Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment Do not DON T remove any fixed cover as this may expose dange
24. delete rename channels cannot set timers INSTALLATION MENU Installation menu is locked So the user can t add channels Changes will be updated after exiting Configuration Menu Set PIN Use Up or Down buttons to select Set PIN option Press OK to display the Set PIN window e Use numeric buttons to enter new pin number You will need to input your new pin a second time for verification purposes After typing correct PIN numbers PIN number will be changed Set PIN New PIN Confirm Note The factory default pin number is 0000 if you change the pin number make sure you write it down and keep it safe English 18 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 18 30 03 2011 14 36 18 Digital Settings Configuration You can configure DTV settings of your TV by using digital Configuration menu Viewing Configuration Menu You can configure the settings of your TV Select Configuration from Setup menu and press OK to view this menu Press the BACK button on the remote control to exit Configuration Off Off TV only Yes Hard of Hearing 4 Favourite mode Channel list Country Finland Cae Hard of Hearing Hard of Hearing for EU countries only If the broadcaster enables any special signal concerning the audio you can set this setting as On to receive such signals e Use Up or Down button to select Hard of Hearing and then press Left o
25. ee 13 Analogue Manual Tuning 13 APS Automatic Programming System 14 Sorting Programme Positions Analogue 14 Stereo and Bilingual Transmissions 15 Viewing Channel List eeens 15 Moving a Channel seeren 15 Deleting a Channel 15 Renaming a Channel erener 16 Locking a Channel 16 Viewing Info Banner 16 Electronic Programme Guide 0 16 Programme Searching eseeeeeeeeeeeee 17 Displaying Subtitles eeeeeeeeeeeee 17 Language Settings 17 Preferred iseina nesinnes 17 OE A E A 17 Viewing Parental Control Menu 18 Menu Lock ini iirrainn ad iaa 18 Set PIN erasiak spinnin eisirean 18 Viewing Configuration Menu 19 Hard of Hearing for EU countries only 19 Controlling Favourite Mode seee 19 Channel List Mode ccceeeeeeeeeeeeees 19 Scan Encrypted ssecceeeeeeeeeeeeeeeees 19 Receiver UpQrade ecceceeceeeeeeeeeeeeeeees 19 Note on Analogue switch off 000 19 Audio Description optional 20 Standby Search c s sssccceeeeeeeeeeeeees 20 Viewing Main Menu cccccceeeeeeeeeeeeeeeeees 20 Selecting Programme Positions 20 Input Selection c cseecceeeeeeeeeeeeeeees 20 Controlling Volume and Muting Sound 21 Equalizer Settings 21 Balance ssdeesscessiccccrsistaeetedecrivdesseisveevecsd 21 Headphone VoOlUMe ceeeeeeeeeeeeeeeeee 21 Sound Mode issiria eani 21 AVE E E T beaets
26. enu and use P CH to navigate and 1 to change value NOTE The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment To select an external input press SOURCE until the appropri ate input source is selected Please always refer to the owner s manual of the equipment to be connected for full details English 11 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 11 30 03 2011 14 36 16 Initial Installation Digital amp Analogue Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television To set up the television use the buttons on the remote control as detailed on page 4 1 Connect the mains plug and switch the TV into standby using the side On Off switch Press any numbered or standby button on the remote control then the language selection menu will be displayed This screen will appear the first time that the television is switched on and each time the television is reset 2 By pressing the Up or Down buttons highlight the language you want to set and press OK button Afterwards the following message will be displayed on the screen Do you want to start an automatic channel scan 3 Select Yes by using Left or Right buttons and press OK to continue The Auto tuning screen will appear and the television will star
27. er adad USB Drive 1 th USB Drive 1 ok Browse Disk You can play music picture files from a USB memory stick Note If you plug USB stick while in analogue mode the TV will automatically switch to digital TV mode Some USB compliant devices may not be supported If the USB stick is not recognized after power off on or First Time Installation first plug the USB device out and power off on the TV set Plug the USB device in again Playing MP3 Files To play mp3 files from a USB disk you can use this menu screen Media Browser ack 2 00 06 0020 d 01 Violin Concerto No 2 KV 21 02 Violin Concerto No 2 KV 21 JA 03 Violin Concerto No 2 K 04 Violin Concerto No 05 Violin Concerto a 06 Violin Concerto i 0026 4 ynfonia Concertan 07 Synfonia Concer tante KV 364 1 All fox Play This nro AMAG mPlay E Loop stop EI Jump Pause E O Previous Next Use Up or Down button to highlight a file Press OK to play the selected file Press GREEN button to play all media files in the folder starting with the selected one Press YELLOW button to pause a playing file Use RED button to stop playback Use Left or Right button to jump to th previous or next file to play e Press INFO button to play files randomly If shuffle mode is enabled previous next function will also jump to the tracks randomly e Use BLUE button to play the selected file repeatedly Viewing JPG F
28. essing EPG the guide screen will appear highlighting details of the channel and programme currently being viewed This may take a few moments to appear Thu 07 06 22 09 Thu 07 06 d 00 00 1 BBC ONE 2 BBC TWO 7 BBC THREE Programme Guide Pulling 70 CBBC Channel This is CBBC 80 BBC NEWS 24 BBC News HARDtalk 105 BBCi BBCi BBCi 800 arte 804 SLO1 Gashrink CIJExpand Ml Prev day m Next day neo Details or Reminder EI jump OSearch oO Now For information on a highlighted programme press INFO button For details of other programmes currently available press RED or GREEN to scroll up and down the list As channels are selected details of the programme currently being broadcast will appear e To set the timer for a selected programme press the OK button to select Timers menu Press YELLOW or BLUE for advancing to next or previous day Press W SWAP button to jump to the current broadcast English 16 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 16 30 03 2011 14 36 18 Programme Guide Displaying Subtitles and Language Selection Programme Searching From the guide screen you can use search feature Press 0 button on the remote control to view Guide Search menu Using this feature you can search the programme guide database in accordance with the genre selected or with name match Displaying Subtitles In digital mode this feature will show sub
29. ext Services if available 29 English 1 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 1 30 03 2011 14 36 06 Using Text Button 2 0 ceeeeeeeeeeeeeeeeeeeeeneee 29 Acessing SUD PaQeS e eseeeeeeetteteeeees 29 Revealing Concealed Text cccccccceee 29 Holding a PaGe eeceeceeeeeeeeeeeeeeeestteaeees 29 Enlarging the Text Display Size 29 Appendix A PC Input Typical Display Modes30 PIN Information sereen 30 reel B AV and HDMI Signal Compatibili Input Signal Types eese 3 ieee C Supported File Formats for USB ao EEE AA EE EA Specifications and Accessories 33 License Information 34 English 2 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 2 30 03 2011 14 36 07 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but like any electrical equip ment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may o
30. ff Switch F HDMI Input _______ Sockets Coaxial Digital Audio Output gt e a decoder y could be Digital N Satellite Free to PEE ARTAN On pa eeaeeeuseaeeseeneeeneeneaeeseaas tibl t CEEA y t pee PC VGA Input SCART I L l y decoder i Scart Socket Aerial Cable ci c iccccsciseeceeetisececsctcencssaessacceecssteadzens Gn HDMI High Definition Multimedia Interface is for using with a DVD decoder or other equipment with digital audio and video output It is designed for best performance with 1080i and 1080p high definition video signals but will also accept SCART leads iheir sapiesszsaesncedetitesigiates A and display VGA 480i 480p 576i 576p and 720p signals PC format signals will also be displayed NOTE Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly Connect the aerial to the socket on the rear of the television If you use a decoder or a media recorder it is essential that the scart cable is connected to the television Before running first time installation any connected devices to standy mode g g A A wide variety of external equipment can be connected to the television therefore the relevant owner s manuals for all addi tional equipment must be referred to for exact instructions The phono sockets located on the side of the TV will accept
31. for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of wth the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of E products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office orthe shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol Hg Pb By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential ne
32. gative consequences for the environmentand human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product English 34 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERNET _16 9639 indd 34 30 03 2011 14 36 23 Questions Below are the answers to some of the most common queries Check the television is not in standby mode Check the mains plug and all mains connections ind Answers For more information go to www toshiba co uk a Check that CHILD LOCK is not selected Check the volume has not been turned down or that sound mute has not been selected A Interference or a weak signal Try a different television station A Make sure the media recorder or DVD player is connected to the television as illustrated in the beginning chapters and then select the correct input by pressing SOURCE A Check that the correct EXT 1 input setting has been chosenor AV A Check all lead connections No sound or unacceptable format sound may be received Check the volume has not been turned down or that sound mute has not been selected a Check the batteries aren t dead or inserted incorrectly A Check that the balance in the SOUND menu hasn t been set to one side Good performance of the analogue text depends on a good strong broadcast signa
33. guage Relative Volume 100 1 Audio Description This function enables or disables the audio description feature Preferred Language You can define a preferred language by using this setting This setting can be used only when it is available Relative Volume Using this option the Audio Description volume level can be increased or decreased relatively according to the general volume Standby Search This setting is visible only when the Country option is set to Denmark Sweden Norway or Finland If the Standby Search is set to On when the TV is in standby mode the TV will look for any changes in the saved channels Use Up or Down button to select Standby Search and then press Left or Right button to set this setting as On or Off If you change Standby Search to Off this function will be unavailable To use Standby search please make sure that you select Standby Search as On General Controls Some of the main controls of your TV are as the following Viewing Main Menu Press t buttons on the TV at the same time to view main menu Press MENU button on the remote control to view main menu Selecting Programme Positions To select a programme position use the numbered buttons on the remote control Programme positions can also be selected using P and P Press INFO to display the on screen information i e programme position stereo mono signal and picture format To revert
34. igital TV region by TV region Please see above to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides impartial information on what people need to do to prepare for the move to digital and when they need to do it How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones Digital UK the body leading the digital TV switchover will advise you when you need to re tune during the switchover If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by Keep this important information about how to re tune your TV during the TV switchover get set for digital switchover and you won t need to re tune Keep this important information about how to re tune your TV during the digitalTV switchover How to re tune As new services are broadcast it will be necessary to re tune the television in order to
35. iles To view photo files from a USB disk you can use this menu screen Media Browser S aad 0001 9 Picture_001 jpg Picture_007 jpg 0002 P Picture_002 jpg 0003 aa Picture_003 jpg 0004 Picture_004 jpg 0005 P Picture_005 jpg 0006 P Picture_006 jpg 0007 P9 Picture_007 jpg ERENJump GgView in fullscreen g YNavigate Slideshow Use Up or Down button to highlight a file e Use numeric 1 9 buttons to jump to theselected file e Press OK button to view the selected picture in full screen Press GREEN button to start the slideshow with all pictures in the folder English 26 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 26 30 03 2011 14 36 22 USB Media Browser continued Slideshow feature Slideshow Feature To Close the Media Player You can use this feature to display photos on your Press MENU button on the remote control TV E Pause Continue a C9 Previous Next Rotate RBH Back to file list Shuffle Loop inro EGI e Press YELLOW button to pause a playing file e Press GREEN button to continue with the slideshow e Press Left or Right button to jump to previous or next file of slideshow e Use Up or Down button to rotate the picture using up down buttons e Press BACK to exit e Press RED button to play in random and continuous mode and icon turns the highlighted icon e If during the slideshow when the shuffle mode is enabled next phot
36. in the case NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OP ERABLE English 3 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 indd 3 30 03 2011 14 36 07 Installation and Important Information Where to install Fixing Strap Fixing Strap Sturdy tie ad as short as possible ZA RINK i Itt aia E f i Tee a eee _ P Clip position on TV is dependent on model Button and stand style is dependent on model Locate the television away from direct sunlight and strong have luminous spots This is not a sign of a malfunction lights Soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen Also please be certain that small items cannot be Place the TV on a stable level surface that can support the inserted into slots or openings in the case weight of the TV In order to maintain stability and prevent it falling over secure the TV to a wall using a sturdy tie to the clip on the back of the TV Turn off the power and clean the screen and cabinet wi
37. ins supply switch on and then wait for few moments until the card is activated Some CAMs may require the following set up Please set the CAM by entering the IDTV menu Conditional Access then pressing the OK button CAM set up menu is not displayed when it is not required To see the viewing contract information enter IDTV press the MENU button then highlight Conditional Access and press the OK button When no module is inserted No Conditional Access module detected message appears on the screen e Refer to the module instruction manual for details of the settings Note Insert or remove the CI module only when the TV is switched off or in standby mode English 25 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 25 30 03 2011 14 36 21 USB Media Browser This TV allows you to enjoy photo or music files stored on a USB device Manual Start e To display Media Browser window you can press MENU button on the remote control and then select Media Browser by pressing Up or Down button Press OK button to continue Media Browser menu contents depending on the contents of your USB drive will be displayed Auto Start When you plug a USB device the following screen will be displayed Do you want to browse USB device Yes No Select YES by pressing Left or Right button and press OK button Media browser will be displayed Media Brows
38. l This normally requires a roof or loft aerial If the text is unreadable or garbled check the aerial Go to the main index page of the analogue text service and look for the User Guide a A Digital Video Broadcast via an aerial antenna You can select them via the Channel List a You can reset TV and perform first time installation Ensure that no one else can use this by removing the Owner s Manual a The Phase may need adjustment Select PC Settings and highlight Phase and adjust until the picture clears a English 35 00_MB45M_ GB _3910UK_IDTV_SILVER8_2740W_ IB_INTERNET _16 9639 indd 35 30 03 2011 14 36 23 a Check the batteries aren t dead or inserted incorrectly a Check the batteries aren t dead or inserted incorrectly Make sure that USB is connected correctly A Incorrect behavior may occur with a USB Hub connection A Favourite mode is set to On Your subscription needs upgrading Contact your service provider When put into standby the television s active standby will automaticalyl search all available channels for downloads provided Automatic Download is enabled The time it takes to do this may vary a Analogue mode TV is selected Switch to DTV mode The Phase may need adjustment Select PC Settings and highlight Phase and adjust until the picture clears a The Phase may need adjustment Select PC Settings and highlight Phase and
39. mally take approximately 30 minutes Note Your TV may start in First Time Installation mode after software update Note on Analogue switch off This is a digital television which is integrated to allow the use of both digital and analogue services However during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services This switch off will happen in a number of phases which will be advertised in your area well in advance It is recommended that at each phase the television is re tuned to ensure that existing and new digital services can be viewed without disruption 19 30 03 2011 14 36 19 Digital Settings Configuration continued Audio Description optional Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and sometimes during dialogue if deemed necessary You can use this feature only ifthe broadcaster supports that additional narration track e In the configuration menu highlight Audio Description by pressing Up or Down buttons and press OK Use Up or Down buttons to select an item Then use Left or Right buttons to set Audio Description q of gt English Audio Description Preferred Lan
40. n buttons Programme guide Info Reveal in TXT mode Picture mode selection AV Source Display sleep timer To alter the volume To mute the sound To change channels Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round Suitable battery types for this remote are AAA IEC RO3 1 5V Do not combine a used old battery with a new one or mix battery types Remove dead bat teries immediately to prevent acid from leaking into the battery compartment Dispose of them in a designated disposal area Warning Batteries must not be exposed to excessive heat such as sunshine fire or the like The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing English 6 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERNET _16 9639 indd 6 30 03 2011 14 36 09 Connecting External Equipment Before connecting any external equipment turn off the On Off switch and remove the mains plug from the wall socket COMMON INTERFACE The Common Interface is for a Conditional Access Module CAM Component Video Cable Holder Input Inputs YPbPr USB Input Side Video Input PC YPbPr AV Audio Inputs Headphone On O
41. ndd 22 30 03 2011 14 36 19 Changing Picture Format Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Press the SCREEN button repeatedly to select between Auto 16 9 4 3 Subtitle 14 9 14 9 Zoom Panaromic or Cinema When Auto is selected the format being displayed is determined by the picture 16 9 4 3 SUBTITLE 14 9 14 9 ZOOM PANORAMIC CINEMA 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_I NTERNET _1689639 indd 23 being broadcast Use this setting when watching a widescreen DVD widescreen video tape or a 16 9 broadcast when available Due to the range of widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen Use this setting to view a true 4 3 broadcast When subtitles are included on a letterbox format broadcast this setting will raise the picture to ensure that all the text is displayed This zooms up the wide picture 14 9 aspect ratio to the upper and lower limits of the screen This option zooms to the 14 9 picture This stretches the left and right sides of a normal picture 4 3 aspect ratio to fill the screen without making the picture appear unnatural The top and bottom of the picture are slightly cut off This zooms up the wide picture 16 9 aspect ratio to the full screen English 23 i wn hl gt iiin wll PAL wi in l 1 i il B C al
42. o will be choosen randomly If the loop function is not enabled the slideshow will stop at the end If the loop function is enabled after the slideshow ends it will start again and again e Press BLUE button to activate Loop function In Loop mode Slideshow goes on continuously and icon turns the highlighted icon e Press INFO button to activate the operations bar English 27 00_MB45M_ GB _3910UK_IDTV_SILVER8_2740W_ IB_INTERNET _16 9639 indd 27 30 03 2011 14 36 22 PC Mode PC Picture Position and PC Picture menus are described below The other menu items are identical to TV mode menus Please see the previous sections Autoposition If you shift the picture horizontally or vertically to an unwanted position use this item to put the picture into correct place automatically Select the PC POSITION option from the main menu PC Position menu appears on the screen A PC POSITION Autoposition H Position V Position Phase Dot Clock No Signal e Press the Down button to highlight Autoposition and then press the OK button H Position H Horizontal Position shifts the image horizontally to right hand side or left hand side of the screen In the PC POSITION menu press the Down button until H Position is highlighted e Press the Left or Right button to adjust the value V Position V Vertical Position shifts the image vertically towards the top or bottom of the screen In the PC POSI
43. ontrol For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Below is a guide to the functions of the remote control text buttons Acessing Sub Pages If a text page has sub pages press and enter the sub page numbers 01 02 03 etc which can be selected using Left Right buttons at the bottom of the text page under the coloured links Revealing Concealed Text To discover the solutions on quiz and joke pages press the INFO button Holding a Page At times it is convenient to hold a page of text Press OK and hold symbol will appear in the top left of the screen The page will be held on screen until the button is pressed again Enlarging the Text Display Size Press SCREEN once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert to normal size Note Analogue text is not available in certain areas due to Digital switchover English 29 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inaa 29 30 03 2011 14 36 22 Appendix A PC Input Typical Display Modes The display has a maximum resolution of 1600 X 1200 The following table is an illustration of some of the typical video display modes Your TV may not support different resolutions Supported resolution modes are listed below If you switch your PC to an unsupported mode a warning OSD will appear on the
44. or Right button to set Backlight to Auto Medium Maximum or Minimum Note Backlight adjustment is not available when Power Save mode is switched ON Please see page 10 of this manual for explanation English 24 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 24 30 03 2011 14 36 21 Timers Digital and Analogue Conditional Access Programme Timers Digital Only This feature will set the television to go to a specific channel at a certain time It can be used to view a particular programme or by setting the mode to daily or weekly can be used to view a series of programmes Press MENU and Up or Down to select Timers item menu and press OK to continue Thu 07 06 22 37 Timers Name Start ONE 07 06 07 22 42 Length 1h Om Delete e To add a timer press the YELLOW button on the remote control Then Add Timer window appears Channel Left or Right keys will navigate the user through the TV or Radio list Date Starting date is entered via the Left Right or the numeric buttons Start Starting time is entered via the Left Right or the numeric buttons End Ending time is entered via the Left Right or the numeric buttons Change Delete permits or prohibits any modifications for other users Duration Duration between Start and End time Repeat You can set a timer to be repeated as Once Daily or Weekly e You can save the adjustments by pressing the GREE
45. pable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this mode HDMI cable transfers both video and audio Separate analo gue audio cables are not required see illustration To view the HDMI device video press the SOURCE button to select HDMI 1 or HDMI 2 HDMI Input Sockets HDMI 2 HDMI 1 HDMI device To Connect a DVI Device Connect an HDMI to DVI adaptor cable HDMI type A con nector to the HDMI terminal and audio cables to the PC Side AV YPbPr sockets see illustration The recommended HDMI to DVI adaptor cable length is 6 6 ft 2m An HDMI to DVI adaptor cable transfers video only Separate analogue audio cables are required Audio cable for HDMI to television connection not supplied HDMI Input Sockets HDMI 2 s HDMI to DVI Adapter Cable not supplied NOTE To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures When turning on your electronic components turn on the television first and then the HDMI or DVI device When turning off your electronic components turn off the HDMI or DVI device first and then the television English 8 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_I NTERNET _16 9639 indd 8 30 03 2011 14 36 10 Connecting a
46. press BLUE button The following menu will be displayed during the automatic tuning APS is running 89 00 MHz 5 Cancel e After APS is finalized the programme table will appear on the screen In the programme table you will see the programme numbers and names assigned to the programmes Digital Manual Tuning The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known Select Channel Search from the Installation menu and press OK Installation Automatic Channel Scan Channel Search First Time Installation e Enter the multiplex number using the numeric buttons The television will automatically search for that multiplex When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated e Repeat as necessary Note Press SOURCE button to switch between TV DTV Analogue Manual Tuning The television can be tuned in manually For example if the television cannot be connected to a media recorder decoder with a SCART lead or to tune in a station on another System To allocate a programme position on the television for a decoder and media recorder turn the decoder on insert a pre recorded film into the media recorder and press PLAY then manually tune e Press MENU and using the Left or Right button select Install menu INSTALL P
47. r ous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufactur ers approved stand bracket or legs with the fixings provided according to the instructions DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unat tended operation or has a standby mode Switch off by withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DON T continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen push anything into holes slots or any other openings
48. r Right button to set the transparency level Menu Timeout To set a specific display timeout for menu screens set a value for this option In the FEATURE menu select Menu Timeout and choose 5 sec 30 sec or 60 sec using Left or Right button HDMI PC Full Mode optional If you want to view PC screen in HDMI mode by using external connection HDMI PC FULL MODE option should be On to adjust the screen ratio correctly This item might be inactive in some resolutions Note If you connect an HDMI device and switch the TV to HDMI mode this feature will be visible except for 1080i 1080P resolution Full Mode optional If you connect a device via HDMI or YPbPr connectors and set 1080i 1080P resolutions Full Mode item will be visible e You can set Full Mode as 1 1 or Normal by using Left or Right button e If you select 1 1 screen ratio will be adjusted correctly If you set Normal screen ratio may expand Ext Out To turn on or off external output via scart socket use this feature Press Up or Down button to select Ext Out Use Left or Right button to set the Ext Out as On or Off Note For copying from a DVD or VCR device you should choose desired source from source menu and turn On to EXT Out from feature menu Ext Out should be On in order to use Timers function in the DTV mode Backlight This setting controls the backlight level Select Backlight by pressing Up or Down button Press Left
49. r Right button to set this setting as On or Off Controlling Favourite Mode Use this function to enable or disable favourite mode e Press Left or Right button to set this function as on or off Channel List Mode You can set a viewing type for channel list using this setting e In the CONFIGURATION menu use Up or Down buttons to select Channel List option e Press Left or Right button to set this function to TV Only Radio Only Text Only or Show All English 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ind 19 Scan Encrypted When this setting is on search process will locate the encrypted channels as well If it is set as OFF manually encrypted channels will not be located while in automatic search or manual search Scan Encrypted Channel feature will always be ON after performing first time installation In the CONFIGURATION menu use Up or Down buttons to select Scan Encrypted e Press Left or Right button to set this function as On or Off Receiver Upgrade This feature helps to keep your TV updated It works automatically and searches for new information when available Note that this setting is inactive to be modified e Please ensure that the TV is set to standby mode The TV automatically goes to active standby mode at 3 00 A M each day and searches for any new information which may be broadcasted and will download this to your receiver automatically This operation will nor
50. rogram Band Channel Colour System Sound System Fine Tune Search Store 175 25 MHz e Using the Down button select Program and key in the programme position to be tuned with the number buttons we suggest Programme 0 for a media recorder e Use the Down button to select Search then press the Left or Right button to search The television will begin searching for channels e Each signal will show on the television if it is not your media recorder press the Left or Right button to restart the search e When your media recorder signal is found save the selection by pressing the Down button until Store is highlighted then press the Left Right or OK button to save e Repeat for each programme position to be tuned then press BACK to finish Note Press SOURCE button to select between TV or DTV English 13 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 13 30 03 2011 14 36 17 Analogue APS and Programme Sorting Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television APS Automatic Programming System When the APS feature is selected all channels and settings will be lost the television will return to factory settings and then re tune e Press MENU and using the Left or Right button select Program Table tab PROGRAM TABLE PO11 Name m Move m Delete APS The
51. s before making any connections to the TV set in order to avoid any possible data loss Note that manufacturer will not be responsible for any file damage or data loss e The TV supports only FAT32 disk formatting NTFS format is not supported If you connect a USB disk with NTFS format usb is unformatted osd will be displayed Do not pull out USB module while playing a file CAUTION Quickly plugging and unplugging USB devices is a very hazardous operation Especially do not repeatedly quickly plug and unplug the drive This may cause physical damage to the USB player and especially the USB device itself USB Memory Connection e Plug your USB device to the USB input of the TV IMPORTANT The TV supports only FAT32 disk formatting NTFS format is not supported SIDE VIEW USB MEMORY e Connectivity is not guaranteed for all devices Connect the USB device to the TV directly Do not use a USB hub English 9 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 inad 9 30 03 2011 14 36 13 Power Save Mode and Cable Holder Environmental Information This television is designed to consume less energy to save environment e You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV To reduce energy consumption you should take the following steps You can use Power Save Mode setting lo
52. stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time posi tions are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press LANG to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word Dual will be displayed Choose the required programme number and if the word Dual appears press LANG to select Dual 1 Dual 2 or Mono For DTV Programmes To view current language and for changing to an alternative language if available press LANG button Available op tions will be listed Viewing Channel List The channel order may be changed to suit your personal preference Select Channel List from the main DTV menu and press OK Channel List 1 BBC ONE 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS 24 f A BBC ONE 802 CATALUNYA R DIO 803 CATALUNYA INFORMACI Setect Move Delete Edit Name Lock Favourites a Fiction Raza Navigate or Watch inro More e Press Up or Down button for selecting a channel You can press RED or GREEN button to move page up or page down e To watch a specific channel highlight it by using Up or Down buttons Afterwards highlight Select tab by using Left or Right buttons Press OK button Moving a Channel e Highlight the desired channel by using Up or Down buttons e Select Move option in
53. t to search for available stations The progress bar will move along the line You must allow the television to complete the search 4 After Automatic Search is completed the following message asking for analogue channel search appears on the screen Select Yes by using Left or Right buttons and press OK to continue Do you want to search for analogue channels 5 Select your Country Language and Text language by using navigation buttons Press OK or RED button to continue To cancel press the BLUE button Note e For proper functioning of digital teletext in DTV mode you should set country as UK in analogue AUTO PROGRAM for UK broadcasts only Do not turn off the TV while initializing first time installation Auto Tuning As new services are broadcast it will be necessary to re tune the television in order to view them Auto Tuning will completely re tune the television and can be used to update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new services are added All current channels and settings i e locked channels will be lost Select the SETUP from the main menu by using Up or Down buttons Press OK and Setup menu will be displayed Setup Configuration Language Installation Select the Installation from the Setup menu by using Up or Down buttons Press OK and Installation menu will be displayed Installation Automatic Channel Scan
54. te Setting Cool option gives white colours a slight blue stress Setting Warm option gives white colours a slight red stress For normal colours select Normal option Noise Reduction Sometimes some words or picture elements to become distorted or pixelated Using the Noise Reduction feature reduces this effect by smoothing out the edges In the PICTURE menu press Up or Down to select Noise Reduction Press Left or Right to set Noise Reduction as Low Medium High or Off Game Mode When Game Mode is set to On specific game mode settings which are optimized for better video quality will be loaded In the PICTURE menu press Up or Down to select Game Mode e Press Left or Right button to set this feature as On or Off Note e Picture mode selection button on the remote control will have no function while Game Mode is on e Picture Mode Contrast Brightness Sharpness Colour and Colour Temp settings will be invisible and disabled while Game Mode is on Picture Zoom In the PICTURE menu press Up or Down to select Picture Zoom Press Left or Right button to set this feature to Auto 16 9 4 3 Panoramic 14 9 Cinema Subtitle or Zoom Resetting Picture Settings This feature allows you to reset the current Picture Settings to the default values Press Up or Down to select Reset and press OK English 22 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 i
55. tetas 21 Picture M de sisas isinir siirsin 22 Picture Adjustments eeeeeeeeeeeeeeeeee 22 Colour Temperature sesessrerrrrrrrnes 22 Noise Reduction sssssesssrrrrerrrsreserrrnnns 22 Game Mode Picture Zoom Resetting Picture Settings eee 22 Changing Picture Format se 23 Child LOCKis scccettisiesiacieeccsesticeeceecsivaiazes 24 Default ZOOM cctccceeeeeeeeeeeeeeeeeeeeeeees 24 Blue Background cccccceeeeeeeeeeeeeeeeeeees 24 Menu Background cccceeceeeeeeeeeeeeeeees 24 Menu TiIMCOUt 20 eeeeeee eee eeeeeeeeeeeeeeeeeees 24 HDMI PC Full Mode optional 24 Full Mode optional s es 24 Ext OUt oeie aoa anrea ain Backlight Programme Timers Digital Only 25 Sleep Timer Analogue seerne 25 Conditional ACCESS eseeeeeeeeeeeeees 25 Manuall Start v5 43 i cccceccecetegctnaeederatestencten 26 AULO Stab ocscssiviciecccnceeccteuaece aasveversaceeis 26 Playing MP3 Files sse 26 Viewing JPG Files ereenn 26 Slideshow Feature c c scscccceeeeeeeeeeeees 27 To Close the Media Player eene 27 AUCOPOSILION 00 eeeeeeeeee eee ee eee eeeeeeeeeeeeeeeeees 28 H POSICION naaa na 28 V POSITION eessssssessrrennunrnrnnnnnrnnnneenrrnrnnnn 28 Deine ele sci tevcccteeedcamstanevevesseres 28 PHa Ean nainii aa aE 28 Dot Clock aieiai aa eaaa 28 PC Picture controls sses 28 Digital Text and Interactive Services 29 Using Digital Interactive Services 29 Analogue T
56. th a soft dry cloth We recommend that you do not use any pro prietary polishes or solvents on the screen or cabinet as this may cause damage Cleaning the screen and cabinet The LCD display panels are manufactured using an extreme ly high level of precision technology however sometimes some parts of the screen may be missing picture elements or Please take note The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous It is always advisable to reduce both the brightness and contrast settings Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines This is not a defect of the LCD TV and is not covered under the manufacturer s warranty Regular use of other size modes will prevent permanent retention EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by i fire ii earthquake iii accidental damage
57. the channel list and press OK button e Edit Number screen will be displayed Enter the desired channel number by using the numeric buttons on the remote control If there is a previously stored channel on that number a warning screen will be displayed Select Yes if you want to move the channel and press OK Edit Number New Number e Press OK button to process Selected channel is now moved Deleting a Channel Select the channel that you want to delete and select Delete option Press OK button to continue The selected service will be permanently deleted Are you sure e A warning screen will appear Select Yes to delete select No to cancel Press OK button to continue English 15 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 15 30 03 2011 14 36 18 Renaming a Channeland Viewing Info Banner and Programme Locking Renaming a Channel Select the channel that you want to rename and select Edit Name option Press OK button to continue Channel List 1 BBC ONE 2 BBC TWO 7 BBC THREE 70 CBBC Channel 80 BBC NEWS 24 105 BBCi 800 TV3 24 1 BBC ONE CATALUNYA RADIO 803 CATALUNYA INFORMACI Select Move Delete Edit Name Lock Favourites DCS Function Rae Navigate or Edit Name inro KAG Pressing Left or Right button moves to the previous next character Pressing Up or Down button changes the current character Pressing the numeric but
58. titles on the screen in the selected language provided they are being broadcast Press SUBTTL button to activate available subtitles e Press SUBTTL button again to turn off subtitles Note e If subtitles are on and a language option is set pressing the button causes the following warning message for UK only Interactive services are not available while subtitles are on Would you like to turn subtitles off now Yes Language Settings Using this menu you can adjust the preferred language settings Select Language from Setup menu and press OK to view this menu Press the BACK button on the remote control to exit Language Settings Menu lt English Preferred Audio Subtitle Movie Subt Guide English English English BBC ONE English Current Audio English Subtitle None Preferred These settings will be used if available Otherwise the current settings will be used Audio by pressing Left or Right keys change the audio language Subtitle alter the subtitle language with Left or Right keys The chosen language will be seen in subtitles Movie Subtitle In order to display subtitles properly use this setting to select a movie subtitle language By pressing Left or Right button select the desired language option Guide By pressing Left or Right buttons change the guide language Current Audio if audio language is supported change the audio language
59. tons 0 9 replaces the highlighted character with the characters printed above the button one by one as the button is pressed e When finished press OK button to save Press MENU to cancel Locking a Channel You can press GREEN button to tag untag all channels YELLOW button to tag untag a single channel Select the channel that you want to lock by using Up or Down buttons Select Lock option by using Left or Right buttons Press OK button to continue You will be asked to enter parental control PIN Enter the PIN number Note Default PIN is set to 0000 Press OK button when the desired channel is highlighted to lock unlock the channel Lock symbol will be displayed next to the selected channel EPG Viewing Info Banner e Press INFO button the information screen will appear giving details of the channel and programme currently being viewed 1 b 22 30 Now PER Next 22 35 23 35 North Question DVB T e Whenever you change channel the TV displays the broadcast picture along with an information banner at the bottom of the screen available only in DTV mode This will remain on the screen for a few seconds If the selected channel is locked you must enter the correct four numeric code to view the channel Enter PIN will be displayed on the screen in such a case Enter PIN Enter the PIN number to continue Electronic Programme Guide Select the on screen guide by pr
60. ue Select Reset and press OK button to reset the adjustments to factory default settings Note For switching to PC source press SOURCE button on your remote control and select PC input You can also use Source menu to switch to PC mode Note that PC mode menu settings are available only while the TV is in PC source English 28 00_MB45M_ GB _3910UK_IDTV_SILVER8_32740W_ IB_INTERN ET _1 9639 ina 28 30 03 2011 14 36 22 Digital and Analogue firavaiaie Text Services This television has a multi page text memory which takes a few moments to load Digital Text and Interactive Services The digital text and interactive services are the up to date way of viewing service information using computer style formats incorporating pictures and interactive views They offer high quality on screen images with multi colour photographic still images advanced text and graphics and are user friendly These services are free to anyone with a digital television however they are not available for all digital stations and are dependant on the broadcaster Simply using the navigation and coloured buttons on the remote control navigating pages and pulling down menus are quick and easy Using Digital Interactive Services e Most channels that offer interactive services will show a prompt for example PRESS RED To access digital interactive services press the Bor RED button It may take a few seconds to load e

Download Pdf Manuals

Related Search

Related Contents

MyTime Bath  Parcours Permanent d`Orientation Découverte de l  User Manual - KANOMAX USA  JALSA54号PDF  PISO-DNM100 Manual  Digitus AK_1512-010 networking cable  Propositions d`activités  CDpro User manual  Agilent E8311/12A 165/330 MHz Pulse and Pattern Generators  manuale - TomTom  

Copyright © All rights reserved. Failed to retrieve file