Bose Cinemate GS
Contents
1. includes the smaller Gemstone speakers and a universal remote control Both configurations include an attractive floor standing Acoustimass module for deep bass sound and an interface module that provides simple audio connections to your TV Using our TrueSpace signal processing technology the CineMate system speakers provide improved spaciousness for bold 3 D effects and movie like realism from surround encoded DVDs and other entertainment sources In fact they provide much of the performance of premium five speaker systems from a modest array of equipment Setup help The CineMate system easily connects to your TV and other home theater equipment To help you set up your CineMate system the following items are provided e Quick Setup Guide e Setup DVD e Detailed instructions in the Setup section of this owner s guide Unpacking Carefully unpack your CineMate system Save all packing materials which provide the safest way to transport your system If any part of the system appears damaged do not try to use it Notify Bose or your authorized Bose dealer immediately For Bose contact information refer to the address sheet included in the carton WARNING To avoid danger of suffocation keep the plastic bags out of the reach of children As you identify them you may want to place a check mark in the box next to the name of each part Note Now is a good time to find the serial number on2. 2 Continue with E on the next page SYSTEM SETUP Connecting the TV audio to the interface module What you need to use Interface module OR SF Optical audio cable Stereo audio cable Q If your TV has audio output connectors you can connect them to the CineMate system Your TV may have an optical connector analog RCA connectors or both If your TV has both types of output connectors you should use the optical connector Using the optical connection gives you the highest quality digital sound Note To receive the highest quality digital sound from the sources connected to your TV connect those devices to your TV using an HDMI cable Connecting optical audio Connect the supplied optical audio cable from the optical audio out connector on your TV to the interface module OPTICAL IN connector The optical out connector on your TV may also be marked Digital Audio AUDIO OUT SYSTEM SETUP Note The interface module has both optical and analog connectors to accommodate a variety of TVs When your TV is connected to the optical input on the interface module the analog input cannot be used as a second audio input Connecting analog audio If your TV is not equipped with an optical connector use the supplied stereo audio cable to connect from your TV audio out connectors to the interface module ANALOG IN connectors The stereo audio cable has two RCA connectors at each e
3. CINEMATE SERIES AW Nis DIGITAL HOME THEATER SPEAKER SYSTEM Owner s Guide Guia de usuario Notice d utilisation Guia dos propriet rios bb SAFETY INFORMATION Please read this guide Please take the time to follow the instructions in this guide carefully It will help you set up and operate your system properly and enjoy all of its advanced features Please save this guide for future reference The interface module is to be used only with the Acoustimass module in the CineMate system WARNING To reduce the risk of fire or electrical shock do not expose the product to rain or moisture WARNING Do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on or near the apparatus As with any electronic products use care not to spill liquids into any part of the system Liquids can cause a failure and or a fire hazard CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION POUR REDUIRE LE RISQUE DE DECHARGE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK pa ELECTRIQUE NE RETIREZ PAS LE COUVERCLE OU DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL L ARRI RE IL NE SE TROUVE A L INT RIEUR AUCUNE PIECE POUVANT ETRE R PAR E PAR L USAGER S ADRESSER A UN R PARATEUR COMPETENT WARNING j The lightning flash with arr
4. the TV and any other equipment it will control CAUTION When positioning the interface module avoid blocking any ventilation openings on the TV or other electronic equipment Continue with 2 on the next page Connecting the speakers to the Acoustimass module What you need to use Speaker cable Qu i CineMate GS series II Gemstone speakers CineMate series Il speakers Acoustimass module SYSTEM SETUP 1 Notice the two plugs at one end of the speaker cable ez Separate the two plugs so each one reaches a speaker N SYSTEM SETUP 3 Insert each plug into the connector on the proper 4 Insert the single plug at the other end of speaker the speaker cable into the connector The plug marked RIGHT goes into the speaker labeled SPE ERS on the back of the placed to the right of your TV facing toward the TV Acoustimass module Refer to for placement guidelines Fastener screws 5 Tighten each fastener screw by hand to secure the plug CAUTION Do not plug the Acoustimass module into an AC power mains outlet until all other components are connected 6 Continue with on the next page SYSTEM SETUP 1 Insert the plug from the interface module Connecting into the input connector on the back of the interface module the Acoustimass module What you need to use Fastener screws Interface module Acoustimass module
5. in your country and 3 Place any necessary return authorization number prominently on the outside of the carton Cartons not bearing a return authorization number where required will be refused Copyright and licenses 2009 Bose Corporation No part of this work may be reproduced modified distributed or otherwise used without prior written permission Manufactured under license from Dolby Laboratories CC DOLBY Dolby and the double D symbol are trademarks of pieracl Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories All rights reserved This product contains one or more programs protected under international and U S copyright laws as unpublished works They are confidential and proprietary to Dolby Laboratories Their reproduction or disclosure in whole or in part or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited 1992 1996 by Dolby Laboratories Inc All rights reserved MPEG Layer 3 audio compression technology licensed by Fraunhofer IIS and THOMSON multimedia Designed with UEI Technology Under License from Universal Electronics Inc QUE 2000 2002 29 323023 0010 BOSE Better sound through researcho 2009 Bose Corporation The Mountain Framingham MA 01701 9168 USA AM323023 Rev 00
6. is in DVD mode 4 Use the remote to control play options and navigate DVD menus See Using the CineMate GS series Il remote control on page 21 for a complete description of the remote buttons In addition to controlling DVD functions the remote will always control the basic CineMate speaker functions such as turning on the speaker system changing the volume and muting or turning off the speaker system 20 Selecting the TV input Press TVeVideo to select the correct TV input for the source you want to watch These inputs are commonly labeled TV Video 1 Video 2 and AUX on the back of the TV If you have multiple inputs connected to your TV you may need to press this button several times to find the correct input Switching control from one device to another The source buttons light up when selected to indicate which source the remote is currently controlling You can easily switch control from one ae to another by pressing the source On a E Pate he conesponds with the source you want to control In addition to controlling the selected source the remote will always control the basic CineMate speaker functions on off volume mute Using the CineMate GS series Il remote control Note In order to control your TV and other audio video devices using the remote control you must first program the remote with a device code for each device Source and input selection e TVeVideo Selects
7. the correct TV input for the source you want to watch These inputs are commonly labeled TV Video 1 Video 2 and AUX If you have multiple inputs connected to your TV you may need to press this button several times to find the correct input e TV Selects the TV source When the TV source is selected the remote will control wv your TV s functions such as channel On selection and menu navigation ori e On Off Turns TV on or off CONTROLS AND INDICATORS e CBL SAT Selects the CBL SAT source When the CBL SAT source is selected the remote will control cable satellite box functions such as channel selection and Electronic Program Guide navigation If your cable satellite box includes a Digital Video Recorder DVR the remote will control both cable satellite and DVR functions when CBL SAT source is selected On Off Turns cable satellite on or off DVD Selects the DVD or CD source When the DVD source is selected the remote will control DVD functions such as play options and menu navigation or e On Off Turns DVD on or off e VCR Selects the VCR source When the VCR source is selected the remote will VCR control VCR functions such as play options y and menu navigation off e On Off Turns VCR on or off e AUX Selects the AUX source When the AUX source is selected the remote will aux control the functions of the source desig 5 nated as AUX oi e On Off Turns AUX source on or off 21 CO
8. the preset bass level 1 Turn the bass control knob to the left to decrease the bass output of the Acoustimass module 2 Turn the bass control knob to the right to increase the bass output CONTROLS AND INDICATORS lle ill Y e Bass control knob 15 CONTROLS AND INDICATORS CineMate series Il ES remote control When you point the remote control at the interface module and press a button the green LED on the The CineMate series I remote control turns the power interface module flashes to your system on and off It also controls the audio voume Press On Off to turn on the CineMate system Press again to turn the system off Press Volume Up to raise the volume When maximum volume is reached the green LED am on the interface module flashes twice Press Volume Down to reduce the volume When the minimum volume is reached the green LED on the interface module flashes twice Press Mute to silence the audio Press Mute again to restore the audio When the system KS is muted the green LED flashes until audio is restored Note The CineMate series Il remote control only operates your CineMate series Il system 16 CineMate GS series Il remote control The remote control provided with the CineMate GS series Il system can be programmed to control your TV DVD or Blu ray disc player cable satellite box VCR and Digital Video Recorder DVR With the CineMate GS series Il system un
9. the rear of the Acoustimass module Copy that number in the space provided on page ii for easy reference when registering your system INTRODUCTION T Cinemate series Il speakers Q T CineMate GS series II Gemstone speakers amp Sp T Small rubber feet 1 Large rubber feet L 1 CineMate series ll remote T CineMate GS series II remote Speaker cable ee T Stereo cable Y Acoustimass module 1 Interface module 1 Power cord T Optical cable O 0 SYSTEM SETUP Placi ng cd e one of the many ways you can the system components What you need to use QV i CineMate GS series II CineMate series ll speakers Gemstone speakers Interface module Acoustimass module See Steps 1 5 for details English On the bottom of each speaker attach one set of small rubber feet Place the left and right speakers e at least 3 feet 1 meter apart e within 3 feet 1 meter of the TV screen e near the front edge of any shelf e aimed straight ahead not angled to face the listening area On the legs of the Acoustimass module attach the large rubber feet SYSTEM SETUP 4 Place the Acoustimass module at the same end of the room as the speakers and your TV at least 3 feet 1 meter from the TV to prevent interference with the screen at least 2 5 feet 8 meters from audio or video tapes to prevent magnetic damage to th
10. ICATORS 15 Acoustimass module bass control 15 CineMate series Il remote control 16 Using the remote to control the CineMate system o o oooooooooooooo 16 CineMate GS series Il remote control 17 Using the remote to control the CineMate system 0 00 e eee eee 18 Setting the remote for your TV and other devices 0 02 20 eeee eee ee 18 To control a combination device 19 Using the remote to watch TV 19 Using the remote to watch a DVD 20 Selecting the TV input o ooo oooooo 20 Switching control from one device to another A Gedo See 20 Using the CineMate GS series II remote control 00 0 ee0ee 21 CARE AND MAINTENANCE 25 Replacing the CineMate series II remote battery 0 00 c ee eae 25 Replacing the CineMate GS series II remote batteries o ooooo ooooo 26 Cleaning your speaker system 26 Troubleshooting 20e eee eee 27 Customer service 00055 28 REFERENCE 29 iii INTRODUCTION Before you begin Thank you for purchasing the Bose CineMate system which delivers the superb acoustic performance needed to enjoy the full audio impact of DVDs and other exciting home entertainment The CineMate system comes in two configurations e CineMate series ll includes the standard CineMate speakers and a simple remote control e CineMate GS series II
11. NTROLS AND INDICATORS Menu and program selection Note The menu and program selection buttons will control only one source at a time depending on which source is selected on your remote TV CBL SAT DVD VCR or AUX e Exits the Setup mode O e Exits the menu or Electronic Exit Program Guide of the currently selected source if supported e Skips ahead one page in the O Electronic Program Guide o if supporteo 9 CBL SAT source must be selected 22 Skips back one page in the Electronic Program Guide if supported CBL SAT source must be selected Displays the menu for the selected source Displays details of items in Elec tronic Program Guide if supported Displays the Electronic Program Guide if supported CBL SAT source must be selected Confirms a menu selection or introduces the next level of menu options Moves up down left or right in onscreen menus Play options Note The functionality of the play options buttons may vary depending on the brand of your device s Some features may not be supported by your brand See your owner s guide s for more information e Skips to the next or previous channel CD track or DVD chapter e Raises or lowers the volume of the current source e Pressing restores muted sound from the current source e Pressing lowers the volume of the current source but does not restore muted sound e Stops the CD DVD VCR or DV
12. R program e Pauses a currently playing CD DVD VCR or DVR program e Starts the CD DVD VCR or DVR program Channel Chapter Track Volume u L CONTROLS AND INDICATORS Rewinds or forwards the CD DVD VCR or DVR Starts instant replay for DVR if supported Initiates the record function The source that will record a program VCR or DVR must be selected Press firmly to initiate Initiates Quick Skip for DVR if supported Initiates Return to Live for DVR if supported Enters device codes Selects a channel CD track DVD chapter or numbered menu item if supported Enters Setup mode for entering device codes into the remote Press and hold for 3 seconds to enter Setup mode Returns to previously selected channel can gt gt E E 200 O 0000 000 n 2 i o O Previous CONTROLS AND INDICATORS e Switches between VCR and TV as the current video input source on your VCR or VCR combination device e Switches between widescreen options and normal TV display if supported e Displays the list of DVR recorded programs if supported e Displays cable satellite program information if supported 24 Widescreen O List Cable specific buttons These buttons operate cable specific functions if supported O O TeleText buttons Europe only O Turns on the TeleText feature if supportea Turns off the TeleText feature if supporte
13. a Expands TeleText top Press again to expand TeleText bottom Press a third time to return to normal if supported CARE AND MAINTENANCE H 2 Remove the used battery and replace with a new Replacing the CineMate battery CR2032 or DL2032 Refer to page ii for series Il remote battery battery safety instructions Be sure the battery is flat side up with the symbol in view Replace the battery when the remote control stops operating or its range seems reduced Insert a CR2032 or DL2032 battery into the compartment on the back of the remote control 1 Using a coin turn the battery cover slightly counterclockwise 3 Re seat the cover and turn it clockwise until it locks into place 25 CARE AND MAINTENANCE Replacing the CineMate GS series ll remote batteries English Cleaning your speaker system Replace both batteries when the remote control stops operating or its range seems reduced Alkaline batteries are recommended 1 Slide open the battery compartment cover on the back of the remote 2 Remove both batteries Be sure to dispose of the batteries according to the regulations in your area 3 Insert two AA IEC R6 1 5V batteries or the equivalent Match the and symbols on the batteries with the and markings inside the compartment 4 Slide the battery compartment cover back into place AA batteries 2 Battery compartment cover 26 e Y
14. dule and speaker cables are both firmly connected to the Acoustimass module e Check the connections on the back of the speakers e Check that the correct TV Video input has been selected See Selecting the TV input on page 20 e Check the connections from the interface module to the TV or other source e Check that the TV s audio output is enabled See your TV owner s guide for information e If the TV s audio output is VARIABLE VAR make sure the TV s internal speakers are turned off and the TV volume is turned up e If using a sound source other than the TV check to ensure that the device is playing source material 27 CARE AND MAINTENANCE Problem What to do Sound but no e Make sure the TV is turned on picture e Check that the correct TV Video input is selected See Selecting the TV input on page 20 Remote control is e Check the battery to be sure it is installed properly inconsistent or e Point the remote control at the interface module doss MORO e Relocate the interface module making sure it is in a clear line of sight to the remote and there are no obstructions e Make sure the protective film is removed from the lens on the front of the interface module e Check that the source button on the CineMate GS series II remote flashes when a button is pressed e Check that the green LED on the interface module flashes when a remote power volume or mute button is pressed e There may be more than one de
15. em within reach of the cable from the interface module and an AC mains power outlet with the front port aimed out from or along a wall for balanced performance hidden under a table behind a sofa or chair or behind drapes as preferred NOT in an enclosure on a bed on a sofa or ona surface that can block the ventilation openings CAUTION Do not block ventilation openings on the bottom and rear of the module Note Keep in mind that the Acoustimass module is the only part of this system that connects to a power outlet SYSTEM SETUP The interface module receives commands from the remote control and provides audio input connections for the CineMate system The remote control commands allow you to turn the speakers on change the volume and mute or turn off the speaker system 5 Place the interface module e on a flat surface near the TV and other home theater equipment e within 15 feet 4 6 meters of the Acoustimass module e NOT in direct sunlight If you position the interface module on a shelf make sure the front edge of the module is flush with the front edge of the shelf If on a high shelf make sure the front edge of the module extends slightly past the front of the shelf so the shelf does not block signals from the remote control Peel the protective film off the lens on the front of the interface module Note The remote should have a Clear line of sight to the interface module
16. iversal remote you can enjoy the convenience of using only one remote control for all your home theater equipment Once your universal remote control has been set up correctly you can use it to control your TV DVD player and other audio video sources CONTROLS AND INDICATORS A ENTER gt v Volume Chapter Previous VCR TV Widescreen List A B o CineMate GS series II remote control 17 CONTROLS AND INDICATORS Using the remote to control the CineMate system When you point the remote control at the interface module and press the On Off Volume or Mute button the green LED on the interface module flashes Press On Off to turn on the CineMate speaker system Press again to turn the system off Press Volume Up to raise the volume When maximum volume is reached the green LED Volume ON the interface module flashes twice Press Volume Down to reduce the volume When the minimum volume is reached the green LED on the interface module flashes twice Press Mute to silence the audio Press again to restore the audio When the system is muted the green LED on the interface module flashes until audio is restored The universal remote can also be programmed to control up to five audio video devices and will control the functions of one device at a time 18 Setting the remote for your TV and other devices To use the remote with your TV you must set the remote for the proper TV device c
17. nce index html Note Where the mains plug is used as the disconnect device such disconnect device shall remain readily operable Note This product must be used indoors It is neither designed or tested for use outdoors in recreation vehicles or on boats Additional Safety Information See the additional instructions on the Important Safety Instructions sheet North America only enclosed in the shipping carton For your records The serial number is located on the rear of the Acoustimass module Serial number Dealer name Dealer phone Purchase date We suggest you keep your sales receipt and product registration card together with this owner s guide 2009 Bose Corporation No part of this work may be reproduced modified distributed or otherwise used without prior written permission CONTENTS INTRODUCTION 2 Before you begin ooooccooccocoo o 2 Unpacking seerste esiu ipanen eee SYSTEM SETUP 4 1 Placing the system components 4 Connecting the speakers to the Acoustimass module oo oooooooo 7 E Connecting the interface module 9 Connecting the TV audio to the interface module 10 Connecting optical audio 10 Connecting analog audio 11 Turning off the TV internal speakers 11 5 Connecting to a power outlet 12 g Inserting the CineMate GS remote batteries 14 CONTROLS AND IND
18. nd one red and one white It connects to left L and right R audio outputs on the rear panel of your TV and the interface module If your TV provides both fixed FIX and variable VAR audio output connectors use the fixed connectors for higher sound quality Be sure to select Fixed in the setup menu of your TV To enjoy the full benefit of hearing TV audio through the CineMate system the internal speakers in your TV should be turned off Your TV may have an onscreen audio menu that includes an option for turning the TV speakers on or off Turning off the TV internal speakers Newer TVs normally have a setup menu item for turning off speakers Older TVs may have a speaker on off switch on the rear panel near the audio output connectors Using a TV setup menu 1 Use your TV remote to display the audio menu on your TV screen 2 Locate the menu item to turn your speakers on or off and select Off If your TV does not have a menu setting for turning off the internal speakers exit the audio menu and reduce the TV volume to its lowest setting Using a speaker on off switch If the rear panel of your TV has a SPEAKER ON OFF switch set it to the OFF position and adjust the TV volume to about 80 of the highest volume 11 SYSTEM SETUP 1 Insert the large plug on the power cable into the Connecting to power connector marked on the Acoustimass a power outlet module What you need to use O Acous
19. ode 1 Locate the TV section in the Universal Remote Device Codes book 2 Locate the device code s for your brand of TV and start with the first one 3 Press and hold Setup on the remote until all five source buttons light up 4 Press the TV source button Only the TV source button will remain lit 5 On the remote keypad enter the first device code for your brand of TV 6 Check that the TV source button blinks twice and turns off after the code is entered 7 Point the remote at your TV and press TV On Off If your TV does not respond go back to Step 1 and try another code Note During programming the five source buttons will flash rapidly three times if you press an invalid key or enter an unavailable device code If this happens go back to Step 1 and start over Follow the same procedure for each of your other devices using the appropriate device code and source button for each one To control a combination device If you are programming the remote to control a combination device that has more than one source such as a VCR DVD unit you can program the combination code into either remote control source You may find it convenient to program the code twice once for the VCR and once for the DVD To find the right device code first search the COMBINATION listings in the universal remote device codes book If you cannot find a valid code there then search the listings for individual device t
20. ou can clean the surface of your speakers Acoustimass module and interface module with a soft damp cloth You can use an ammonia free window cleaner on a soft cloth to maintain the finish e Do not use any sprays near the speakers Do not use any solvents chemicals or cleaning solutions containing alcohol ammonia or abrasives e Do not allow liquids to spill into any openings e The speaker grilles require no special care although you may vacuum them carefully if necessary English CARE AND MAINTENANCE Troubleshooting Problem What to do No power e Unplug the Acoustimass module power cord from the AC wall outlet for one minute e Make sure the power cord is inserted securely into the Acoustimass module e Reconnect the power cord firmly into an operating AC wall outlet The green LED should flash 10 times then extinguish the system will then be in standby e Make sure the interface module is plugged into the Acoustimass module properly e Make sure you use the remote control to power on the system No sound e Make sure the CineMate system is turned on The green LED on the front of the interface module should be lit when the system is on e Increase the volume e If your system is a CineMate GS series II make sure you pressed the remote button for the source you want to hear e Check to see if the TV is muted If so press the TV remote control Mute button to unmute it e Make sure the interface mo
21. owhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock CAUTION Make no modifications to the system or accessories Unauthorized alterations may compromise safety regulatory compliance and system performance The exclamation point within an equilateral triangle as marked on the system is intended to alert the user to the presence of important operating and maintenance instructions in this owner s guide WARNING Keep the remote control battery away from children It may cause a fire or chemical burn if mishandled Do not recharge disassemble heat above 100 C 212 F or incinerate Dispose of used batteries promptly Replace only with a battery of the correct type and model number WARNING Danger of explosion if battery is incorrectly replaced CineMate series Il remote Replace only with Duracell Eveready Energizer Maxell Toshiba or Shun Wo CR2032 or DL2032 3 volt lithium battery x CE Please dispose of used batteries properly following any local regulations Do not incinerate WARNING Do not place any naked flame sources such as lighted candles on or near the apparatus This product conforms to the EMC Directive 2004 108 EC and to the Low Voltage Directive 2006 95 EC The complete Declaration of Conformity can be found at www Bose com static complia
22. timass module power cable 2 Plug the other cable end into the AC mains power Q n Acoustimass module 12 SYSTEM SETUP When you connect the CineMate system to a power source the green LED on the front of the interface module flashes for 10 seconds then extinguishes indicating that the system has been connected to power Continue with g on the next page When you press the remote control On Off Volume Up Down or Mute button the green LED on the interface module flashes CAUTION Bose recommends using a safety agency approved surge protector on all electronic equipment Voltage variations and spikes can damage electronic components in any system 13 SYSTEM SETUP 2 Insert the two batteries making sure to match Inserting the the and symbols CineMate GS remote batteries The CineMate GS series Il remote control requires two AA batteries supplied The batteries go into the compartment on the back of the remote To insert the batteries 1 Slide the battery compartment cover off 3 Slide the cover back on until it clicks into place Symbols inside the compartment show how to match the and symbols on the batteries 14 Acoustimass module bass control The bass control knob located on the rear of the Acoustimass module allows you to change the bass level of the system The bass control knob is set at the factory to the middle position To change
23. vice code for your brand of device Find your device and brand in the Universal Device Codes book Try programming another code then check the device for improved functionality Sound is distorted Make sure speaker cables are not damaged and the connections are secure e Reduce the audio output level from the TV connected to the interface module Sound is coming e Turn off your TV s internal speakers See Turning off the TV internal speakers on page 11 from the TV e Turn down the TV volume Customer service For additional help in solving problems contact Bose Customer Service Refer to the address sheet included with the CineMate system REFERENCE Limited warranty Your CineMate system is covered by a limited transferable warranty Details of the limited warranty are provided on the product registration card that is included in the carton Please refer to the card for instructions on how to register Failure to register will not affect your limited warranty rights What you must do to obtain Limited Warranty Service Return product with proof of purchase from an authorized Bose dealer using the following procedures 1 Contact the Bose organization in your country region visit Global Bose com for Bose contact information in your country region for specific return and shipping instructions 2 Label and ship the product freight prepaid to the address provided by the Bose organization
24. ypes TV CBL VCR DVD etc CONTROLS AND INDICATORS Using the remote to watch TV Note In order to control your TV and other audio video devices using the remote control you must first program the remote with a device code for each device 1 Press TV On Off to turn on your TV and the CineMate speaker system The green LED on the front of the interface module will light Press the TV source button The button will flash to indicate that the remote control is in On TV mode or TV source ton i Use the remote to select a channel and navigate menus See Using the CineMate GS series Il remote control on page 21 for a complete description of the remote s buttons In addition to controlling TV functions the remote will control the basic CineMate speaker functions such as turning on the speaker system changing the volume and muting or turning off the speaker system 19 CONTROLS AND INDICATORS Using the remote to watch a DVD Note In order to control your TV and other audio video devices using the remote control you must first program the remote with a device code for each device 1 Press TV On Off to turn on your TV and the CineMate speaker system The green LED on the front of the interface module will light 2 Press DVD On Off to turn on your DVD player DVD source button E 3 Press the DVD source button On The button will flash to indicate that the remote control
Download Pdf Manuals
Related Search