Lenco DVL-1953B 19" HD-Ready Black
Contents
1. Lenco INSTRUCTION MANUAL 19 48cm LED TV with DVD amp DVBT Model No DVL 1953 BLACK For information and support www lenco eu Contents 1 3 5 6 8 11 12 14 15 22 23 29 30 31 SAFETY INFORMATION Unit Remote Control Aerial connection Connecting external devices Common Interface slot Auto installation setup Source menu Menu settings DVD Operation TROUBLE SHOOTING GUIDE TECHNICAL SPECIFICATIONS SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY BEFORE USE Take note of the following safety information which appears on the back of the TV COVER SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 1 CAUTION TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE ANY This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit Keep these instructions e Do not use this TV near water e Clean only with a slightly damp cloth e Do not block any ventilation openings e Install in accordance with the supplied Quick Start Guide and this User Guide e Protect the power chord from being walked on or pinched particularly at plugs and the point where it exits from the TV e Do not allow the power chord to overhang the edge of a table e Unplug this TV during ligh2. you will need to use the PC audio cable Connect all cables carefully and do not bend or break the connector pins When using the VGA cable e Switchon the TV VGA cable e Switchon the PC VGA e Select PC VGA as input source HDMI to DVI cable v S x gt When using the HDMI cable un Audio cable e Select HDMI as input source on inline C E 2 HDMI All illustrated cables are not supplied Connecting external devices continued Connecting Video camera and Video recorder Video camera e Connect the AV cable to the TV and to the video camera e Turn on both video camera and the TV e Select AV CVBS source e You can now see the playback picture from the video camera e Toconnect the video camera using other cables refer to the video camera Instruction manual Video recorder e Connect the Scart cable to the TV and video recorder e Turn on both video recorder and the TV e Select Scart source e You can now see the playback picture from the video recorder e Toconnect the video recorder using other cables refer to the video recorder instruction manual Video recorder Video camera AV cable a n v E VIDEO Q o 5 lt O All illustrated cables are not supplied 10 Connecting external devices continued Connecting an audio system You can supply the TV sound to the stereo system A with the Scart socket Use a special scart cable SCA
3. Press A V to select the desired feature and again press button to open that section 4 Press A Wto select the desired feature and then press OK to select the new setting 5 To exit the menu press DVD SETUP or w to select EXIT SETUP and then press OK When launching the setup routine the pressing of the following buttons will turn off the setup menu while the choices that have been changed will be saved Menu specification 1 SYSTEM SETUP The system setup options are illustrated below 4 3PS Ce 16 9 TV TYPE PASSWORD REIS 1 KID SAFE DEFAULT 2G 3 PG EXIT SETUP 4 PG13 5 PG R 6 R 7 NC 17 8 ADULT RESTORE TV SYSTEM According to the Color system of your TV select proper TV TYPE PASSWORD The password option is initialized as locked You cannot set the ratings limit or change the password To enable these features you must unlock the Password The default password is 0000 Using the A V button move the highlight to PASSWORD press the button and enter 0000 You will see the padlock symbol open You may now change the RATING or put in a new password number If the Lock symbol is BLUE you must press the button to enter the lock field the lock symbol will change to YELLOW you may now enter a new 4 digit number Please remember or write down the new Password and keep safe 27 RATING The Rating feature is a rating limit feature like movie ratings This helps you to control what DVD the family watches
4. GOTO 44 DVD fast reverse ng F DVD fast forward SLOW REPEAT A B 4 DVD previous chapter DVD next chapter vy e gt 2 buttons for DVD operation H Lu VOL LANGUAGE Select DVD disc language v PE ZOOM Adjust picture size in DVD mode SUBTITLE Turn on off the DVD subtitle display o oar al MENU DVD play list Disc menu ANGLE Select DVD picture angle TITLE DVD title GOTO DVD search Tracks or Chapters PROGRAM Edit the program and play SLOW play DVD programs at slow speed REPEAT Play the title or chapter once again A B Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and end of it 2 buttons for TELETEXT In ATV mode TV TXT Teletext on off CANCEL Turn off the Teletext display REVEAL Reveal any hidden text for example quiz answer HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size SUBPAGE press to subpage again to cancel INDEX go to index Colour buttons short cuts follow the coloured links in the text In DTV mode press red key to switch between TV and radio Green key yellow key and blue key are invalid 3 SYS MENU System setup menu 4 INPUT Press to display the input source menu 5 CH Scan through channels 6 VOL Adjust the volume 7 DVD switch to DVD 8 DVD SETUP DVD system setup 9 Cursor left right
5. SETUP STEREO MONO L MONO R MIX MONO 28 Disc Care About Disc Terms Title Generally pictures or music compressed on a DVD are divided into several sections title Chapter The smaller section unit of picture or music in a DVD under the title usually one title is comprised of one or more chapters and each of them is numbered for easy searching but some discs may not have a recording chapter Track A segment of picture or music on a CD Each track is numbered for searching Care of Disc Video disc contains high density compressed data that needs proper handling 1 Hold the disc with fingers by outer edge and or the center spindle hole Do not touch the discs surface 2 Do not bend or press the disc 3 Do not expose the disc to direct sunlight or heating sources Stere discs in cabinet vertically and in dry condition Prevent exposure to Direct sunlight Heat or exhaust from a heating device Extreme humidity Clean the disc surface with a soft dry cleaning cloth Wipe the disc surface gently and radically from center toward the outer edge Do not apply thinner alcohol chemical solvent or sprays when cleaning Such cleaning fluids will permanently damage the disc surface 29 TROUBLE SHOOTING GUIDE To assist in locating possible faults use the help guide below SYMPTOM TROUBLESHOOTING No Picture no sound Check that the TV is correctly plugged in Check that the TV is connected
6. There are 8 levels of selection from KIDS SAFE to ADULT Adult is the play all selection 2 LANGUAGE SETUP The language setup options are illustrated below OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP OSD LANGUAGE The OSD will display in the language you choose AUDIO LANG If the disc you are playing has the language you choose it will output audio in that language SUBTITLE LANG If the disc you are playing has the language you require you may select this either in the Menu or using the SUBTITLE button on the Remote control You may also switch this OFF MENU LANG If the disc you are playing has the language you require you may select this 3 AUDIO SETUP NDT gt SPW TONE SPDIF RAW SPDIF PCM EXIT SETUP Be Highlight the AUDIO OUT option and press the A w to choose the audio output mode you prefer Press OK to confirm There are 3 optional audio output modes SPDIF OFF SPDIF RAW and SPDIF PCM SPDIF RAW is for amplifiers with a built in digital decoder SPDIF PCM is selected for amplifiers with no built in digital decoder TONE Use the A button to move the scroll and adjust the tone 4 DIGITAL SETUP The video setup options are illustrated below DYNAMIC RANGE Use the A button to move the scroll and adjust the dynamic range DUAL MONO Choose the mode of the audio output DUAE MONO gt There are four modes STEREO MONO L MONO R MIX MONO EXIT
7. lights soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Place the TV on a sturdy platform of which the surface should be flat and steady This will prevent it from falling over Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen and so that small objects cannot be inserted into the ventilation slots or openings in the cabinet Unit and Accessories O O O O O O 000 0 0 VOL INPUT PLAY EJECT POWER MENU CH CH VOL Please insert a 12cm disc according to the silk LED Indicator Remote Control Window keep clear The functions of the TV buttons are described below MENU Press to display the OSD menu Press again to exit the menu CH CH Press to scan through channels They are also can be used to move down up in the OSD menu screen VOL VOL Press to adjust the volume They are also can be used to move left right in the OSD menu screen VOL button can be used to skip forward to next menu INPUT Press to select the source PLAY Play Pause the disc playing EJECT Eject the disc Power Turn on off the TV set Remote control 1 POWER Turn the TV on standby 2 buttons for DVD operation CQ OW WD OND 4 Load eject DVD disc LANGUAGE ZOOM SUBTITLE Pil Play pause DVD program aap E Stop DVD program MENU ANGLE TITLE
8. menu the original code Use the lt gt button to switch between all is OOOO channel and fav 1 8 channel INSERT Select a channel you want to insert Use the Ok button to set the current press YELLOW button then select the position channel to lock if the current channel already press GREEN button to insert or you could lock use it again will unlock press RED button to cancel the option EDIT da CA blue button to add the channel Use the lt gt button to switch between all ist options and use Ok button to select Use the A V button to select channel then use Ok button to enter the program info menu 16 TV List 07 05 09 00 45 Program No Video PID Program No Audio PID Frequency Khz Bandwidth MHZ Constellation Hierarchy Mode Guard Interval HP Code Rate FFT LP Code Rate CD Exit Save amp Exit Use the A V button to select channel then use Ok button to rename the program TV List 07 05 09 00 45 6 mno 6 abc2 7 pars7 def3 3 ea ghi4 9 wxyz9 jk15 0 O amp 0 9 key in characters Press 0 9 totoggle E Move C3 exit Backspace switch There are two options Use the 1 9 number buttons to select different character Use the Green button to Switch between upper and lower case letters Circularly press the number buttons 2 to select between a b c and 2 and use OK button to save SKIP Use the cursor buttons to select the chan ne
9. other audio equipment Coax DVD coaxial output Common Interface CI slot RF Connect antenna or cable 75 Ohm coaxial to receive TV signal R L in Connect them to the audio output terminal of DVD shared with YPbPr VIDEO Connect it to video output terminal of DVD YPbPr Connect them to the YPbPr video output terminal of DVD used in component source Caution Before connecting external devices e Makes sure to disconnect the appliances from the power supply in order to avoid any potential damage from occurring e Make sure to establish the required connection e Make sure that the connectors are properly and correctly attached before connecting the appliances to the power supply Connecting external devices continued PC connection As PCs are sometimes still supplied with a conventional CRT monitor you may need to adjust the display settings of your PCs graphics card otherwise the pictures may not appear correctly Switch on your PC still with your original monitor connected now select the screen resolution and select 60Hz refresh rate Switch off your PC then connect it to your TV while both appliances are still switched off VGA HDMI PC Connection Use a PC VGA cable not supplied to connect the TV to your PC You can also use an HDMI cable to connect to your PC if your PC Graphic card supports HDMI When the HDMI cable is used the PC audio cable is no longer required If you use the HDMI to DVI cable
10. the first page Disc Type Track the playing track total tracks Mute PBC Repeat Mode Elapsed Time of the Playing Track Press the button again to show the second page Language the serial number of playing language the amount of optional languages or Off Language Type Audio Type Subtitle the serial number of playing subtitle the amount of optional subtitles or Off Press the button for the third time the display menu fades out 4 Loading and playing VCD Press Display button once to show the first page Disc Type Track the playing track total tracks Mute PBC Repeat Mode Elapsed Time of the Playing Track Press the button again the display menu fades out 5 Loading and playing CD HD CD WMA Digital Audio Press Display button once to show the first page Disc Type Track the playing track total tracks Mute Repeat Mode Elapsed Time of the Playing Track Press the button again the display menu fades out Using the Search Feature 1 Compatible with DVD SVCD VCD CD HD CD discs 2 You can use Search feature to select a title chapter track number or go to a specific point in a title First press GOTO button on the remote controller to bring up the search menu and enter the edit state Secondly press Arrow buttons to highlight the title chapter track number or the time option Thirdly use Numeric buttons to enter the title chapter tra
11. up down Cursor buttons used in menus OK CONFIRM BUTTON for menu O lt Di lt 9 m x 4 DISPLAY LANGUAGE EPG Remote control continued 10 DVB switch to DTV 11 SYS EXIT Exit the OSD menu GO OD OD 12 0 9 En gt CO GD Choose channel directly Number buttons for DVD MENU ANGLE TITLE GOTO C gt Returns to the previous channel 13 PICTURE Select the picture mode SOUND Select the sound mode NICAM A2 Selects Nicam or Mono sound MUTE Mutes the Audio SLEEP Standby Timer TV RADIO Disc menu change between TV and Radio Buttons for DTV function FAV Display the favorite program list FAV Favorite program up down PIC FORMAT Press to change the display mode of the screen 4 3 16 9 etc SUBTITLE To switch the dialogue at the bottom of the screen TEXT To view the teletext broadcasting program DISPLAY Display current mode information LANGUAGE To select audio language EPG To show the Electronic Program Guide during no menu state only PIC FORMAT SUBTITLE DISPLAY LANGUAGE Aerial connection WARNING ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS Connecting the TV Antenna Connect the TV antenna to the aerial socket with a 75 ohm co axial plug For best results use a high gain TV aerial preferably roof or loft mounted e To improve picture quality in a poor signal area purchase and install a signal amplifie
12. RT to RCA Please consult your hi fi instructions for details If you have a surround sound amplifier decoder B Use the Scart cable or the special scart cable Scart to RCA B 58 o g ecs PLY DO Scart to RCA cable Scart cable All illustrated cables are not supplied Connecting a DVD player Connect a DVD player using either a SCART cable or the HDMI cable only if your external equipment supports HDMI O When using the SCART cable e Switchon the IV e Switch on the DVD player e Select SCART as input source SCART When using the HDMI cable e Select HDMI as input source All illustrated cables are not supplied 11 Common Interface Slot USING YOUR COMMON INTERFACE SLOT Common Interface The Common Interface Cl slot is designed to accept the Conditional Access Module CAM and Smart Card in order to view the pay TV programmes and additional services Contact your Pay Per View TV service provider to get more information about the modules and subscriptions NOTE Conditional Access Module and Smart Cards are sold separately WARNING SWITCH OFF YOUR TV BEFORE ANY MODULE IS INSERTED INTO THE COMMON INTERFACE SLOT THEN ADD THE SMART CARD TO THE CAM CI Slot CAM Smart Card R 1 Turn on the TV and ensure DTV Source is selected 2 Ifthe CAM is detected the TV will display the following message on the screen Common Interface Module inserted wait for a few mo
13. ce Overscan Reset Allows you to select menu language Allows you to select the time for OSD menu displays on the screen Allows you to select the transparence for OSD menu displays on the screen Turn on off the overscan funciton Can be selected in HDMI mode Press button to restore factory default 20 Menu Settings continued FUNCTION SLEEP TIMER ASPECT TT LANGUAGE BLUE SCREEN SYSTEM LOCK FTI Use the 4 and P buttons to select the FUNCTION menu as the picture above press w button to enter the menu The FUNCTION menu includes the following options EEEiIeo JS lt lt kKkK f f l e oro Sleep Timer Aspect TT Language Blue Screen System Lock System Lock Child Lock Key Lock Parental Change Code FTI First Time Installation Allows you to setup the sleep timer to 15min 30min 45min 60min 75min 90min 105min 120min and off Allows you to select the screen display mode Can be selected in DTV mode Allows you to select the Teletext language Can be selected in ATV mode Turn on the blue screen display in no signal state by selecting ON Can be selected in ATV mode Press button and enter the code to enter the submenu The original code is 0000 CHILD LOCK KEY LOCK CODE Turn on off the system lock function Lock the channel you have to enter the code to view the channel Lock th
14. ck you want to play or the elapsed time you want to go to in that title At last press ENTER button to start playback For example entering 01 23 56 will start playback one hour twenty three minutes and fifty six seconds into the title 25 3 Notes a This feature does not work in Program Play mode b If PBC is on it will turn off automatically when Search Playback starts c When playing WMA MP3 JPEG discs Search Feature does not work Changing the Soundtrack or Language 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 2 Press the LANGUAGE button to display current soundtrack a Press the button to switch soundtracks b Press the button again on the remote to turn to next soundtrack 3 When playing a SVCD or VCD disc there are five soundtracks Stereo L R L L R R L L Auto A D Detect and R R Auto A D Detect With each consecutive press of the button the soundtrack switches If you press the button six times soundtrack cycles back to Stereo 4 When playing a CD HD CD WMA Digital Audio disc there are three Stereo L R L L and R R 5 When playing a DVD or SVCD disc press LANGUAGE button to display current language press the button again to turn to next language if the disc has different languages Subtitles 1 Compatible with DVD SVCD discs 2 Press the Subtitle button on the remote once and the subtitle info banner appears 3 When a DVD or SVCD is recorded wit
15. de cycles back to Off b In DVD playback press Repeat button again to turn on repeat mode There are three repeat options Off Chapter Repeat and Title Repeat With each consecutive press of the button the repeat mode switches If you press the button four times repeat mode cycles back to Off c In WMA Digital Audio disc JPEG playback press Repeat button again to turn on repeat mode There are four repeat options Off Track Repeat Directory Repeat and Disc Repeat With each consecutive press of the button the repeat mode switches If you press the button five times repeat mode cycles back to Off Using the Display Feature 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc discs 2 Loading and playing DVDs two pages Press DISPLAY button once to show the first page Disc Type Title the playing title total titles Chapter the playing chapter total chapters Elapsed Time of the Disc Press the button again to show the second page Language the serial number of playing language the amount of optional languages or Off Language Type Audio Type Subtitle the serial number of playing subtitle the amount of optional subtitles or Off Angle the serial number of playing angle the amount of optional angles or Off Press the button for the third time the display menu fades out 3 Loading and playing SVCD discs two pages Press Display button once to show
16. ducts should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for mmm cycling advice Waste Electrical and Electronic Equipment Directive
17. e button five times Fast Multispeed Fast cycles back to normal play 3 During DVD play when Multispeed Fast gets to the beginning of the next title chapter it resumes normal play During SVCD or VCD play with PBC on when Fast Forward Play gets to the beginning of the next track it resumes normal play Multiphase Slow Motion Play 1 Compatible with DVD SVCD VCD 2 Multiphase Slow has six speeds 1 2 1 3 1 4 1 5 1 6 1 7 of the normal Speed play when pressing the Slow button consecutively when playing discs 3 When you press Play or the Slow button 7 times the player returns to normal play Freeze Frame 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 During CD HD CD WMA or Digital Audio disc JPEG playback press Pause once to freeze playback Press Play button to resume normal playback Using the Repeat Feature 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 24 Ad ition lo 2 While a disc is playing press Repeat button once and the repeat banner appears to show current repeat mode a In SVCD VCD CD HD CD WMA or Digital Audio disc JPEG sequence playback mode Press Repeat button again to turn on repeat mode Press the button again on the remote to turn to the next repeat mode There are three repeat options Off Track Repeat and Disc Repeat With each consecutive press of the button the repeat mode switches If you press the button four times repeat mo
18. e buttons on the TV set you could not operate the TV by the buttons on the TV set Select the parental control mode Change the code Press gt button to enter the First Time Installation menu 21 Menu Settings continued D V POSITION 100 C CLOCK 100 PHASE 97 AUTO ADJUST gt Use the and P buttons to select the PC SETUP menu as the picture above press w button to enter the menu The PC SETUP menu includes the following options H Position Adjust the transverse position of the screen V Position Adjust the vertical position of the screen Clock Adjust the pixel clock frequency until the image size is maximized for the screen Phase Adjust the phase of the ADC sampling clock relative to the sync signal until a stable image is obtained Auto Adjust Press gt button to setup the parameter of the screen automatically 22 DVD Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mode If there is no disc in the DVD player the screen will show NO DISC It will play once you put in the disc Press source to DVD mode play the disc Place a disc Insert a disc according to the silk Do not touch the playing surface Hold the disc around the outside with your fingers and place the disc into the slot The player will automatically draw the disc into the player To Eject the disc press the a button on the TV button on
19. h subtitles you can use the Subtitle feature to view the subtitles on screen By default subtitles are off The info banner will display Subtitle Off 4 To display subtitles press the Subtitle button again The default language with its responding serial number will be displayed in the info banner and subtitles will be displayed in that language There are 8 supported subtitles Chinese English Japanese French Spanish Portuguese Germany and Latin With each consecutive press of the Subtitle button the subtitle switches For example Language Icon 1 English DTS 6CH or Off the availability of the subtitles are disc dependent To turn subtitles off press the Subtitle button until Subtitle Off is displayed Mute the Audio Output 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc JPEG discs 2 Pressing the Mute button allows you to reduce sound to an inaudible level and the icon of MUTE will be displayed on screen Press the button again or press the Vol button to return to the normal condition 3 If the player has no sound check that the Mute is not on Zoom In the Video Image 1 Compatible with DVD SVCD VCD JPEG discs 2 The Zoom Function allows you to enlarge the video image 3 Press Zoom repeatedly to activate the function and choose the required zoom factor Zoom 2 Zoom 3 Zoom 4 Zoom 1 2 Zoom 1 3 Zoom 1 4 Zoom Off Repeat a Specific Segment on the Disc that You Define 1 Compat
20. ible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 During normal or fast playback press the A B button once REPEAT A appears on the screen This indicates the start point of the loop Press A B again REPEAT A B will be shown this indicates the end point of the loop The segment will now be repeated until you press the REPEAT button again to turn off the feature Press A B again to cancel the loop points When playing a SVCD VCD or CD disc you can repeat a specific segment only in one track When the next track begins A B Repeat turns off automatically 7 When playing a DVD disc you can repeat a specific segment only in one title Oo o1 amp Digital Audio Disc 1 Compatible with Digital Audio discs 2 The player will search the disc directory automatically and display the contents on screen 26 3 The player will then start to play the first track of the selected directory 4 To change directories use the direction buttons DVD System Operation System operation will define the setting of the set these definitions will be stored until you change them again General Steps of Setup Menu 1 Pause or Stop the player Press DVD SETUP on the remote control The main menu will be shown as below TV SYSTEM TV TYPE PASSWORD RATING DEFAULT EXIT SETUP 2 Press the A V buttons to select the Icon of the desired section eg TV System and press gt button to open that section 3
21. l you want to Skip Use OK button and will be shown at the channel selected To remove the skip function by using OK button again When a channel has been selected to Skip you still may select that channel with the numeric buttons DELETE Use the cursor buttons to select the channel you wish to delete Use OK button and will be shown at the channel selected To remove the delete function use OK button Cl MENU in DTV mode Please contact your pay perview provider who can supply a viewing card and cam unit with instructions for their use 17 SEARCH Use OK button to enter the search menu Use the number buttons to select the corre sponding characters Menu Settings continued PICTURE PICTURE MODE STANDARD gt CONTRAST 50 BRIGHTNESS 30 COLOR STS 90 TINT SHARPNESS COLOR TEMP NOISE REDUCTION ON LP MOVIE 2 SELECI MENULIS GS Use the 4 and P buttons to select the PICTURE menu as the picture above press w button to enter the menu The PICTURE menu includes the following options Picture Mode Choose from Standard Movie Vivid and Personal Note Contrast Brightness Color and Sharpness can only be adjusted in the Personal mode option in the Picture Mode Settings Contrast Controls the difference between the brightest and darkest regions of the picture Brightness Controls the overall brightness of the picture Color Control the color Sharpness Inc
22. lect the program you want to edit Start Search Press button to start search Channel Found Display the channel it found SIG Quality Display the singal quality of the channel it found SIG Strength Display the singal strength of the channel it found Frequency Display the frequency of the channel it found Program Edit Press button to enter the submenu as the following picture Program Edit menu for ATV Program Edit menu for DTV PROGRAM EDIT TV List 07 05 09 00 45 No Program Name 001 7 Digital 002 7 Digital 1 003 7 Digital 2 004 7 Digital 3 005 7 HD Digital E 006 LUXE TVSD 007 LUXE TV UK HD 0ececeeco6e 008 LUXE TV HD Ch5 177500 Khz 009 BBC ONE PID V 1025 A 1026 4 Exit Fav MOVE MENULIS a O FAV Use the A V button to select channel Use 1 8 number buttons to set the current channel to your favorite group 1 8 if the current channel already be one of your favorite gruop 1 8 use 1 8 number buttons again will set it to a normal channel Use Yellow button on the remote the menu will appear save the change NAME Select the channel press GREEN button on the remote control to change the name of the channel Use 4 gt V Abutton to name and press OK button to confirm LOCK Select the channel press RED button to lock the channel You have to enter the code to view the channel you have locked Note you could set the code in System Lock LOCK menu in FUNCTION
23. m directly 8 The program indicator in the screen and the playing chapter track illuminate Additional operation Selecting Tracks 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 When playing a DVD disc press Numeric buttons on the menu or title page to select tracks During DVD playback you can input desired title numbers directly 3 During sequence playback of a SVCD or VCD disk press the numeric buttons to select tracks During Program Playback and when the PBC is on you can only press Prev Next button to select 4 As for CD HD CD discs press Numeric buttons directly to select tracks 5 When playing WMA Digital Audio disc JPEG discs press Numeric buttons to select different tracks on current track list Skipping Tracks 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 To skip forward to the beginning of the next title chapter track on a disc press Next on the remote or the right side of the player 3 To skip backward to the beginning of the preceding title chapter track on a disc press Prev on the remote or the right side of the player ippica Fast Motion Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 Press the Multispeed Fast Slow button on the remote during play to search through a disc Multispeed Fast Slow has four speeds x2 x4 x8 x20 With each consecutive press of the button the search speed increases If you press th
24. ments until the card is activated 3 Select the relevant digital Pay Per View channel 4 Detailed information on the Smart Card in use is displayed 5 Press the Ok button to access the card menu Refer to the Module Instruction Manual for setting details 6 When the module is removed the following message will appear on the screen Common Interface module removed 12 Auto installation setup Power On Off the LCD TV 1 Connect to the power supply with a power code and an adaptor 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control When you initially turn on the LCD TV you will see the first time installation menu as below Ensure that the aerial is plugged in to the TV Make sure your Remote is in TV mode by pressing INPUT button switch on the TV by pressing POWER You will see the first time LANGUAGE 4 LANGUAGE DI installation menu You can select Country and Language OSD gt display language and select the contents of the Auto Search Analog Program or Digital Program according to the hints at the bottom When you finished press A4 W button to select OK and press OK button to start auto search The TV will start searching from the lowest frequency you can press MENU to cancel the auto search When it finds a station it will automatically store this in the first location and move to the next When A
25. ot allow water or moisture to enter the TV Do NOT use in wet or moist areas such as Bathrooms steamy kitchens or near swimming pools Do not use this unit when moisture condensation may occur Any repairs must be carried out by qualified personnel only Do not open this unit A non expert attempting to repair the unit could be dangerous and potentially cause a fire hazard IMPORTANT SAFETY INFORMATION continued e Liquids spilt into the unit can cause serious damage Switch the set OFF and disconnect the mains power supply then consult a qualified service person before attempting to use the unit again e Do NOT remove the safety covers There are no useable or serviceable parts inside You may invalidate the warranty Qualified personnel must only service this apperatus e Do NOT tap or shake the screen you may damage the internal circuits Take good care of the remote control do not drop e Never place hot objects or open flame sources on or close to the TV e High temperatures can melt plastic and lead to fires e TocleantheTVusea soft dry cloth Do NOT use solvents or petrol based fluids For stubborn stains you may use a damp cloth with dilute detergent Headphone Warning Loud music can damage your hearing irreversibly therefore do not set the volume to a high level when listening through headphones particularly for lengthy listening periods Where to install Locate the television away from direct sunlight and strong
26. r ge e lf the antenna needs to be split for two TVs use a 2 Way Signal Splitter not supplied Connecting external devices This instruction manual shows the simplest and most effective way of connecting your TV to ancillary equipment Alternate methods are listed below HDMI Lead You can connect this TV to a compatible device using a HDMI lead This method will give the best picture Connect the cable from the HDMI equipment to the TV HDMI socket SCART Lead You can connect this TV to a compatible device using a SCART lead The connection uses component video signals i e the red green and blue RGB content of the video are sent on separate signals VGA Cable You can use your TV as a monitor for your personal computer by using a VGA cable Sound from your personal computer may also be played through the TV Connecting external devices continued LL x O O g e lo O Pr Video R in L in Pb Y 000000 POWER USB HDMI VGA PC IN Headphone Coax O w como W o o POWER Connect to the mains adaptor USB For DVB T software upgrade only HDMI Connect it to the HDMI of DVD or other equipment VGA For PC display Connect it to the D Sub 15 pins analog output connector of the PC PC IN Connect it to the audio output terminal of PC SCART Connect them to the SCART video output terminal of DVD used in component source Headphone Connect it to your headphone or
27. r items of equipment Apparatus with Class 1 construction shall be connected to a mains socket outlet with a protective earthing connection Keep away from rodents Rodents enjoy biting into electric flexes Always hold the plug when pulling out the plug from the mains supply socket Do not pull on the flex the flex can become overloaded and cause a short circuit Set up the unit so that no one is able to trip over the flex Do not place heavy items on the flex which may damage it Take note that the flex cannot be reached and pulled by young children avoiding injury Do not set up the unit near to heat sources The casing and the flex could be damaged by the impact of heat The screen is made of plastic and can break if damage is done to it Be careful when collecting sharp edged plastic splinters to avoid injury Avoid placing the unit on any surfaces that may be subject to vibrations or shocks To protect the unit during a thunderstorm unplug the AC power cable and disconnect the aerial Caution Do not touch the aerial RF connector When you leave your home for long periods of time unplug the AC power cable for safety reasons The unit becomes warm when in operation Do not place any covers or blankets on the unit in order to prevent overheating The ventilation holes are not to be blocked Do not set up near radiators Do not place in direct sunshine When placing on a shelf leave 5 cm 2 free space around the whole unit Do n
28. rease this setting to see crisp edges in the picture decrease it for soft edges Tint Controls the tint NTSC mode only Colour Temp Choose from Normal Cool and Warm Noise Reduction Reduce any interference noise by selecting ON Can be selected in ATV mode 18 Menu Settings continued SOUND MODE BASS TREBLE BALANCE AVL Use the and P buttons to select the SOUND menu as the picture above press w button to enter the menu The SOUND menu includes the following options a Ohoho5o5o5o5o5o5o5oeoeceEeoEAMM gt gt gt IIGIGI IEpD Sound Mode Allows you to select among Standard Music Movie and Personal Bass Can be adjusted when the sound mode is set to User Controls the relative intensity of lower pitched sounds Treble Can be adjusted when the sound mode is set to User Controls the relative intensity of higher pitched sounds Balance To adjust the balance of the left and right sound track or turn off the volume of the left and right sound track AVL Control the volume of the program automatically when you turn on the function by selecting On 19 Menu Settings continued LANGUAGE OSD TIMER IRANSPARENCE OVERSCAN RESET ENGLISH 3U SEG ON Use the and P buttons to select the SETTING menu as the picture above press w button to enter the menu The SETTING menu includes the following options I Language OSD Timer Transparen
29. tening storms or when unused for long periods of time WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS TV TO RAIN OR MOISTURE THE TV MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE TV NOTE No naked flames such as candles should be placed on the TV IMPORTANT SAFETY INFORMATION Continued This unit has been produced according to all current safety regulations The following safety tips should safeguard users against careless use and the dangers connected with such use Although this appliance has been carefully manufactured and rigorously checked prior leaving the factory as with all electrical appliances it is possible for problems to develop If you notice smoke an excessive build up of heat or any other unexpected phenomena you should disconnect the plug from the mains power socket immediately Ensure that the unit is sufficiently ventilated Never place next to or underneath curtains The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operarble This set should only be connected to a mains power supply which matches that stated on the label on the rear of the TV do not attempt to connect it to any other type of supply The socket outlet must be installed near the equipment and easily accessible To prevent overload don t share the same mains supply socket with too many othe
30. the remote control Play The contents of each disc vary as to how the disc was authored and what features are included Some discs start playing as soon as they have been read some need Play selecting in the Menu Different play modes are offered such as Menu Play Sequence Play and other modes hip Play 1 Compatible with DVD SVCD or VCD2 0 2 If the disc is a DVD ROOT MENU will appear on the screen If it is SVCD or VCD 2 0 please press the Menu button to see the menu 3 When a DVD disc is loaded press the Arrows buttons to highlight the menu item you want to choose With SVCD or VCD 2 0 press the numeric buttons to select a track to play 4 Press ENTER or Play to start when highlighted 5 Return to Menu when Playing When playing a DVD disc press the Menu button to return to the ROOT menu When playing a SVCD or VCD and PBC is on press the Menu or Return button to return to the disc menu Title Play 1 Compatible with DVD discs only 2 During DVD playback press Title button to display the DVD title content 3 Press the Arrow buttons to highlight the title you want to choose and press Enter also you can press numeric buttons to choose 4 The DVD player begins with the chapter 1 of the chosen title Sequence Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 When a SVCD or VCD disc is loaded and PCB is on press the MENU button once switches the PBC off The player can now pla
31. tions Select DTV source for example FUNCTION SLEEP TIMER ASPECT TT LANGUAGE BLUE SCREEN SYSTEM LOCK FTI Note Use the left right up down navigation buttons to select the required options in the menus 14 Menu Settings continued CHANNEL COUNTRY AUTO SEARCH MANUAL PROGRAM PROGRAM EDIT GI MENU Use the 4 and P buttons to select the CHANNEL menu as the picture above press w button to enter the menu The CHANNEL menu includes the following options Country Press and buttons to select the Country Can be selected in ATV mode Auto Search Press button to start auto search Auto Search menu for DTV Auto Search menu for ATV Manual Program Press button to enter the submenu Manual Program menu for ATV PROGRAM COLOR ETS SOUND SYS MANUAL SEARCH FINE SKIP Program Select the program you want to edit Color Sys Select the color system for the program you want to edit Sound Sys Select the sound system for the program you want to edit Manual Search Use and button to manual search AFT Turn on off the Auto Frequency Tuning function for Manual Search Fine Use and button to fine tune Skip Select Yes to skip the program when you scan the programs by CH 15 Menu Settings continued Manual Program menu for DTV Dda amp GHANNEL START SEARCH CHANNEL FOUND SIG QUALITY SIG STRENGTH FREQUENCY MOVE SELECT Program Se
32. to a suitable power source Check the electrical supply is turned on No Picture Ensure that the TV is powered on Check that the cables are fitted securely Ensure the aerial and or external sources are connected Press the INPUT button to change the source Turn the TV on or off No Sound Press the MUTE button and check if Mute mode is set Switch to another channel and see if the same problem occurs Press V button to see if the problem can be solved channels Adjust the antenna No colour on some Check if the same problem exists on other channels channels black amp Ensure the correct picture settings are selected white Noisy Snowy Check the antenna is connected correctly Ghosting picture Check that the antenna Is in good condition Try moving the antenna NOTE The TV must only be repaired by a qualified registered service person Never attempt to remove the back cover as the TV has dangerous voltages inside that may cause fatality or fire 30 TECHNICAL SPECIFICATIONS Specifications of the TV that you have just purchased may vary from the information in this table due to technical innovations TV Specifications TV System PAL BG DK Audio System BG DK I SECAM L L Resolution 1440 x 900Pixels RGB Aerial input 75 Q unbalanced Power requirements 12V 5A Power consumption 60W 31 It at any time in the tuture you should need to dispose ot this product please note that Waste electrical pro
33. utosearch is complete the TV will display the first station found If you want to change the order of the programs you can use the Program Edit function to change Source Menu You can select the input source menu by pressing the Source button on the remote control or the INPUT button on the LCD TV INPUT Press button on the remote control SOURCE E gt Use lt gt to move to the desired input source Press to select 13 Menu Settings 1 Turn the LCD TV on 2 Press the MENU button on the Remote Control 3 Use the lt and buttons to navigate through the menu 4 Press the EXIT button to exit the Menu CHANNEL MENU PICTURE MENU Allows you to search channels and set up a variety of channel options Allows you to make adjustments to your picture settings Select DTV source for example Select DTV source for example PICTURE CHANWNE COUNTRY AUTO SEARCH MANUAL PROGRAM PROGRAM EDIT GI MENU PICTURE MODE 4 STANDARD p CONTRAST sO BRIGHTNESS 50 COLOR E 50 TINT 50 SHARPNESS 4 5 COLOR TEMP NORMAL d NOISE REDUCTION ON gt SOUND MENU SETTING MENU Allows you to customize the sound options and effects Allows you to setup a variety of setup options Select DTV source for example Select DTV source for example SOUND SOUND MODE ti STANDARD LI BASS ee TREBLE BALANCE AVI FUNCTION MENU Allows you to set up a variety of lock time and setup op
34. yback in sequence mode To turn the PBC back on press the MENU button again 3 Except for SVCD or VCD discs when in stop state press the Play button the player will play in the Sequence mode This is for all compatible discs oo Play 1 Compatible with DVD SVCD VCD CD HD CD WMA Digital Audio disc 2 The Program Playback option allows you to enter the order in which you want chapters or tracks to play maximum to 16 3 Program Menu If PBC is on this operation will turn PBC off while the chapters tracks play in programmed order 4 According to the highlight use the Numeric buttons to enter the chapters tracks in the order you want them to play Then press Play or use Arrow buttons to highlight the PLAY item and press Enter The chapters tracks will play in the programmed order You can program maximum 16 titles chapters tracks 23 5 According to the Direction Indicator on the menu you can press Arrow buttons to highlight where you want to enter 6 During Program Playback if program button is repressed the program order and the contents will be displayed on the screen and the Program Playback will be stopped also you can press Stop and Play to resume normal playback 7 Notes To clear the program order use Arrow buttons to highlight the CLEAR item then press Enter To modify the program order use Arrow buttons to highlight the item you are changing and enter the new chapter track you want to progra
Download Pdf Manuals
Related Search