Gefen EXT-DVI-FM1000
Contents
1. DVI EFM 1000 Extender EXT DVI FM 1000 User Manual www gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday PST Write To Gefen Inc c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support gefen com Notice Gefen Inc reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice DVI FM1000 Extender is a trademark of Gefen Inc 2010 Gefen Inc All Rights Reserved gt Rev A1 All trademarks are the property of their respective companies CONTENTS Introduction Operation Notes Features Panel Layout Connecting And Operating The DVI FM1000 Extender Specification Warranty INTRODUCTION Congratulations on your purchase of the DVI FM1000 Extender Your complete satisfaction is very important to us Gefen Gefen delivers innovative progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working solutions that are easy to implement and simple to operate The Gefen DVI FM1000 Extender The DVI FM1000 Extender extends your DVI display up t2. eatures Extends any DVI Digital Visual Interface compliant device up to 3 280 ft 1km from the computer Supports video resolutions up to 1080p 2K and 1920 x 1200 Uses inexpensive and widely available single strand multimode SC fiber optic cable e Automatic EDID Programming feature enables quick and correct sync of source to display e Invulnerability to electromagnetic influences EMI thanks to all fiber construction Saves space on your desktop and Increases Productivity e Eliminates computer noise where you work E Supports DDWG standard for DVI compliant monitors Package Includes 1 DVI FM Sender Unit 1 DVI FM Receiver Unit 1 5V DC 1A Power Supply 1 User s Manual PANEL LAYOUT Sender Front Panel Receiver Front Panel DVI In DVI Out Sender Back Panel Receiver Back Panel Optical 5VDC Optical 5V DC Cable Input Input Cable Input Input CONNECTING AND OPERATING THE DVI FM1000 EXTENDER How to Connect the DVI FM1000 Extender EDID Recording Display information EDID contains resolution and timing information for your display This information is needed by the source for proper video output Follow these steps to record the EDID of the display into the sending unit If you know that EDID is not required by the source the followings steps for recording will not be necessary 1 Connect the DVI FM1000 Extender sending unit output is marked as COMPUTER to the display using a user monitor supp
3. ever Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information please visit Gefen s Warranty page at http www gefen com kvm aboutus warranty jsp PRODUCT REGISTRATION Please register your product online by visiting Gefen s web site at http www gefen com kvm Registry Registration jsp 7 Rev A1 000 x xMA DVI FM1 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com ce A E D
4. lied DVI cable 2 Power on the display 3 Insert the included 5V DC power adapter into the sending unit The LED on the top panel of the unit will begin to flash rapidly Once the LED stops flashing and is solid the monitors EDID will have been successfully recorded 4 Disconnect the power adapter from the DVI FM1000 Extender sending unit and then disconnect the DVI FM1000 Extender sending unit from the display Connecting the DVI FM1000 Extender System 1 Connect the DVI FM1000 Extender sending unit Output is marked as COMPUTER to the DVI source device 2 Connect DVI FM1000 Extender receiving unit Output is marked as MONITOR to the DVI display di Connect the DVI FM1000 Extender sending and receiving units together using a user supplied SC terminated multi mode fiber optic cable NOTE This unit will only operate with SC terminated multi mode fiber optic cable 4 Connect the included 5V DC power adapter to the DVI FM1000 receiving unit 5 Power on the DVI source NOTE If the source does not supply the required 5V to the DVI FM1000 Extender sending unit the power supply must be attached to the sending unit and not the receiving unit 5 SPECIFICATIONS Video Amplifier Bandwidth BT 165 MHZ Single Link put Vide Signall EE 1 2 Volts p p PE 5 Volts p p TTL DVI KEE eege Type DVI D 19 pin male LNK CONNECIOT E SC Power Eeer 5V DC e ee E e LE 2 5 Watts max E un En D 2 6 D x 0 6 H x 1 6 W per transcei
5. o 3 280 feet 1km away from your video source with only two tiny transceivers required using a 100 optical SC fiber solution with a single strand of fiber optic cable It s a great way to extend DVI video easily and unobtrusively How It Works The DVI FM1000 sender unit plugs into your computer The DVI FM1000 receiver unit plugs into your DVI display A single strand of multimode SC fiber optic cable connects the Sender and the Receiver units to each other OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI FM1000 EXTENDER DVI FM1000 Extender can only be operated with multi mode SC terminated fiber optic cable The supplied power adapter must only be used on the receiving unit Power for the transmitting unit is supplied by the source device If the LED on the transmitting unit does not activate once the source is connected and powered please plug the included power adapter into the transmitting unit instead of into the receiving unit The EDID from the display is stored in the transmitting unit but must be recorded from the display first Please see instructions on page 5 for the proper EDID recording procedure The following are the resolution and maximum distance ratings Usage that exceeds these limits will produce unexpected results 1920 x 1200 will be extended up to 300m 990ft 1600 x 1200 will be extended up to 500m 1 650ft 1280 x 1024 will be extended up to 1000m 3 280 ft FEATURES F
6. ver SIP 5 Ibs WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications The two year warranty is only valid on new products purchased as of January 2007 All products purchased before this date still retain their 1 year warranty Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed Please note that if a product is returned for repair proof of sale may be required in order to claim the warranty Customers returning products for repair from locations outside the USA are responsible for shipping charges to and from Gefen The warranty for copper cables is limited to 30 days and returned cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate How
Download Pdf Manuals
Related Search