Sharp HT-SL50
Contents
1. 60 Hz Hi Speaker connection Connect the wire without insulation tube to the minus terminal and the wire with red and white insulation tube to the plus terminal Caution Use speaker with an impedance of 4 ohms or more as lower impedance speaker can damage the unit Do not make a mistake when connecting the right and left speakers The right speaker is the one on the right side when sx z you face the unit lt a Do not let the bare speaker wires touch each other Do not allow any objects to fall into or to be placed in the bass INCORRECT reflex duct Do not stand or sit on the subwoofer sound bar You may be injured System connections continued Connecting to TV with HDMI Caution Turn off all other equipment before making this connection Notes This unit supports HDMI which enables ARC Audio Return Channel To enable ARC make sure to use High Speed HDMI cable This structure also needs TV that supports ARC To listen to the sound from non ARC compatible TV connect the audio output from TV to this system AUDIO IN TV terminal This unit can be operated power on off or volume up down via a TV or similar component which supports HDMI CEC Consumer Electronics Control If this does not work it does not mean this system is faulty Refer to the operation manual of the respective component on how to a2. Reference page 1 Left Front Speaker 4 Right Front Speaker terminal Red Black 9 2 Right Front speaker 5 Left Front Speaker terminal White Black 9 3 Bass Reflex Duct Hi Subwoofer FRONT VIEW REAR VIEW Reference page Reference page 1 Stand by Indicator 5 HDMI Input Jack 0 6 e eee eee eee 11 2 Bass Reflect Duct 6 AC Power Cord 0c cece eee eens 9 3 Woofer 7 Speaker Terminal 0000e cece ee eeee 9 4 HDMI TV ARC Output Jack 0 10 8 Audio In TV Jack 2 0 c cece e eee eee 12 System preparation Make sure to unplug the AC power lead before installing the unit or changing the position Select from three installation methods according to the Using foot cushions preferred position Option 1 Option 2 DSa ane GE 1 Peel off the double sided tape separator and attach the sound bar stand cushion at the bottom surface of the Option 1 sound bar stand ire Option 2 A Sound bar stand cushion Sound bar stand Double Attach foot cushions as shown sided tape separator To mount the sound bar on the wall Caution Hook Be very careful to prevent the sound bar 1 46 lbs 0 66 kg from falling when mounting on the wall 2 Fix the sound bar stand as shown Before mounting check the wall strength Do not put on the veneer plaster or whitewashed wall The sound bar may fall I
3. ARC capable TV to send the audio stream to the HDMI OUT jack of the receiver To use this function your TV must support the ARC E Volume Volume can only be controlled from your TV Hi Power Off This unit will automatically go to stand by mode if 1 TV or similar component which supports HDMI CEC is turned off 2 no signal from Audio input is detected after 1 minute Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician If something is wrong with this product check the following before calling your authorized SHARP dealer or service center E General Symptom Possible cause No sound is heard Is the input signal selection set properly Is HDMI compliant equipment being used Is the HDMI cable connected correctly Connect the HDMI cable correctly Is the sound input support PCM signal Do not connect or disconnect an HDMI cable while power is on This may lead to operation problems Hi Condensation Sudden temperature changes storage or operation in an extremely humid environment may cause condensation inside the cabinet Condensation can cause the unit to malfunction If this happens leave the power on until normal playback is possible about 1 hour Wipe off any condensation on the transmitter with a soft cloth before operating the unit E if problem occurs during operation Wh
4. cart stand tripod or table Placing the product on an unstable base can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product the Product when ship in its original container will be free from defective workmanship and materials and agrees that it will at its option either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period s set forth below This warranty does not apply to any appearance items of the Product nor to the additional excluded item s set forth below nor to any Product the exterior of which has been damaged or defaced which has been subjected to improper voltage or other misuse abnormal service or handling or which has been altered or modified in design or construction In order to enforce the rights under this limited warranty the purchaser should follow the steps set forth below and provide proof of purchase to the servicer The limited warranty described herein is in addition
5. to whatever implied warranties may be granted to purchasers by law ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD S FROM THE DATE OF PURCHASE SET FORTH BELOW Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser Correction of defects in the manner and for the period of time described herein shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product and shall constitute full satisfaction of all claims whether based on contract negligence strict liability or otherwise In no event shall Sharp be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage Some states do not allow the exclusion of incidental or consequent
6. SHARP HT SL50 SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product To obtain the best performance from this product please read this manual carefully It will guide you in operating your SHARP product HT SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer ia eet HOM HIGH DEFINITION MULTIMEDIA INTERFACE Notes This product is recommended for flat panel TV LCD and plasma For HDMI connection this product only supports PCM Pulse Code Modulation signals This product is controlled via HDMI CEC Consumer Electronics Control specification therefore for HDMI connection your TV s CEC must be enabled For TV without HDMI CEC headphone or RCA variable output analog connection is available For TV without HDMI headphone or RCA variable output connection is required Recommended Connection TV Type CEC FUNCTION CONNECTION CONNECTION METHOD with HDMI HDMI IN vert 4 with ARC MUST BE ENABLED ARC Page 10 Method 1 with HDMI MUST BE ENABLED HDMI IN Page 11 Method 2 HDMI TV without HEADPHONE OUT Page 12 Method 1 CEC amp ARC or non NONE RCA HDMI TV VARIABLE OUT Page 12 Method 2 MOANA Pete n Malaya TINSZA935AWZZ SHARP CORPORATION 11C RASC Accessories Please confirm that only the following accessories are included RCA to headphone cable Subwoofer
7. Serial number Date of purchase Place of purchase oo eeeeseeeeeeeeeeeeetereneteeteneaes This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Special Notes continued WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user s authority to operate this equipment ENERGY STAR Program Information Products tha
8. Stand x 2 Audio cable x 1 HDMI cable x 1 Foot cushion x 4 1pin 2 pins x 1 GITAUAO04AW01 QCNWGAO62AWPZ QCNWGAO65AWPZ PCUSGA189AWZZ QCNWGA064AWPZ Lay Wall Mount Angle x 2 Pattern Paper Speaker Wire Sound bar Stand x 2 Sound bar Stand LANGKA225AW01 TCAUHA026AWZZ QCNWHA043AW01 GITAUA012AWSA Cushion x 2 PCUSSA190AWZZ Special Notes NOTE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN rN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR YOUR RECORDS For your assistance in reporting this unit in case of loss or theft please record below the model number and serial number which are located on the rear of the unit Please retain this information Model number
9. cm of free space along the sides top and back a fire or other type of accident causing damage SHARP of the equipment will not be held responsible for any damage resulting from i use of this unit with a voltage other than that which is 4 10cm 4 10 cm 4 10 cm specified 4 10 cm Use the unit on a firm level surface free from vibration Keep the unit away from direct sunlight strong magnetic fields excessive dust humidity and electronic electrical equipment home computers facsimiles etc which generate electrical noise Do not place anything on top of the system x E y T Do not expose the unit to moisture to temperatures higher than 140 F 60 C or to extremely low temperatures If your system does not work properly disconnect the AC power cord from the AC outlet and replug Incase of an electrical storm unplug the unit for safety Hold the AC power plug by the head when removing it from the AC outlet as pulling the cord can damage internal wires The AC power plug is used as a disconnect device and shall always remain readily operable Do not remove the outer cover as this may result in electric shock Refer internal service to your local SHARP service facility This unit should only be used within the range of 41 F 95 F 5 C 35 C Controls and indicators Hi Sound Bar 2 1 FRONT VIEW REAR VIEW
10. ctivate the CEC Example Go to the Menu of the component to search and enable the CEC Different brands may have different naming for the CEC For Sharp LCD TV it is named as AQUOS LINK To watch 3D images connect 3D compatible TV and video component 3D Blu ray Disc player etc to this system Make sure to use High Speed HDMI cables and put on the 3D glasses otherwise 3D images may not be viewed properly To listen to the sound from TV some setting in the TV menu is needed For details refer to the operation manual of the TV If unable to select external speaker for Sharp LCD TV it is named as AQUOS AUDIO SP turn OFF and ON the CEC Make sure the LCD TV Audio setting is set to PCM not other format such as Dolby Digital DTS etc Select from the 2 methods below 1 Method 1 This connection is for HDMI TV with ARC Audio Return Channel TV l SS ee E rn aE E To HDMI output terminal DVD Blu ray pen disc player or p similar terminal Notes Refer to the operation manual of the equipment to be connected Fully insert the plugs to avoid fuzzy pictures or noises System connections continued 2 Method 2 This connection is for HDMI TV without ARC Audio Return Channel TV DVD Blu ray disc To HDMI player or s
11. en this product is subject to strong external interference mechanical shock excessive static electricity abnormal supply voltage due to lightning etc or if it is operated incorrectly it may malfunction If the unit is not restored in the previous operation unplug and plug in the unit again or unplug all components connected and plug in again MEUG Cleaning the cabinet Noise is heard Move the speaker away during playback from any computers or mobile phones The power is not Is the unit unplugged turned on The protection circuit may be activated Unplug and plug in the power cord again after 5 minutes or more Volume cannot be Check if the HDMI CEC is controlled enabled For headphone or RCA TV setting VARIABLE is required 3D images not Depending on the TV and displayed on the TV Video component 3D images may not be displayed Check the operation manual of the respective component Periodically wipe the cabinet with a soft cloth Caution Do not use chemicals for cleaning gasoline paint thinner etc It may damage the cabinet finish Do not apply oil to the inside of each component It may cause malfunctions Specifications As part of our policy of continuous improvement SHARP reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated a
12. f unsure consult a qualified service technician Mounting screws are not supplied Use appropriate ones Check all wall mount angle screws for looseness Select a good location If not accidents may occur or the sound bar may get damaged SHARP is not responsible for accidents resulting from improper installation Do not let children dangle on the sound bar once it is attached on the wall as it can cause damage and injury E Driving screws SHARP designed the sound bar so you may hang them on the wall Use proper screws not supplied See below for size and type 1 8 3 2 mm Option 1 3 16 5 mm Option 2 7 8 Min 22 mm Note Sound bar stand can be removed by pulling it off backward from the sound bar E 7 System preparation continued Fixing wall mount angle 1 Fix the pattern paper to the wall in horizontal position as below 523 mm aun Wall surface 39 mm Pattern paper 2 Make a hole on the wall following the screw point marks on the pattern paper by using a drill 1 1 4 32 mm 3 8 8 9 mm Wall surface WE Installing the sound bar 1 Align the wall mount slot at the sound bar to the wall mount angle 2 Slot the sound bar into the wall mount angle 3 Fix a wall mount plug not supplied into the hole using a hammer until it is flush with the wall surface 1 1 4 32 mm 3 8 8 9 mm Wall surface 3 Fix t
13. g has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer 11 gt 12 YS Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus A When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 13 gt 14 Important Safety Instructions continued Additional Safety Information 15 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power
14. hem securely Wall surface 4 Screw the wall mount angle to the wall as shown in the illustration Total screw is 4 pieces Wall mount angle 2 Wall mount fe emp lt angle AN Wall Wall screws x 2 surface mount angle LN Wall surface y screws x 2 Wall surfac Note Make sure all screws are fully tightened screws are not supplied Falling prevention Safety wires not supplied are useful to prevent the sound bar from falling off the table Loop the safety wires not supplied into each hole as shown and tie the safety wires to the LCD TV stand Placing the system Installation image Blu ray DVD player Place the system as shown Remove the protective film covering the sound bar and subwoofer before using the system Notes As the sound from the system is omni directional you can place the speaker anywhere you like However it is recommended to place it as close to the TV as possible The front panel of the speaker is not removable Caution Donotchange the installation direction when the unit is turned on Hf Placing the stand Place the stand as shown System connections Make sure to unplug the AC power cord before making any connections Subwoofer Right Sound Bar 25 19 l AC outlet AC 120 V
15. ial damages so the above exclusion may not apply to you THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Model Specific Section Your Product Model Number amp Description HT SL50 Sound Bar Home Theater System Be sure to have this information available when you need service for your Product Warranty Period for this Product One 1 year parts and labor from the date of purchase Additional Item s Excluded from Warranty Coverage Non functional accessories supplies and consumable if any items Where to Obtain Service At a Sharp Authorized Servicer located in the United States To find a location of the nearest Sharp Authorized Servicer call Sharp toll free at 1 800 BE SHARP What to do to Obtain Service Ship prepaid or carry in your Product to a Sharp Authorized Servicer Be sure to have Proof of Purchase available If you ship the Product be sure it is insured and packaged securely TO OBTAIN SUPPLY ACCESSORY OR PRODUCT INFORMATION CALL 1 800 BE SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza Mahwah New Jersey 07495 1163 Precautions G Warning Benes The voltage used must be the same as that specified on Please ensure that the equipment is positioned in a this unit Using this product with a higher voltage other well ventilated area and ensure that there is at least than that which is specified is dangerous and may result in 4 10
16. imilar output terminal SIL Scie ae Sa g ra t To HDMI output terminal To HDMI To HDMI terminal input terminal H System connections continued HM Connecting a TV with AUDIO IN TV Connect to the TV using an audio cable 1 Method 1 TV To HEADPHONE terminal Audio cable Subwoofer 5 a n 2 acl Ed J To AUDIO IN TV input terminal 2 Method 2 TV To audio output terminal RCA cable Subwoofer 5 D n 2 ke q To AUDIO IN TV input terminal Note To control the volume some setting in the TV MENU is needed For details refer to the operation manual of the TV Example Go to the Setting Menu of the TV select AUDIO OUT and choose VARIABLE However if this does not work please use method 1 General Control Make sure to enable the HDMI CEC when making HDMI connection To turn the power on Plug the AC power cord into an AC outlet the stand by indicator turns red This unit will automatically power on if 1 TV or similar component which supports HDMI CEC is turned on 2 audio signal is detected from Audio input The stand by indicator turns blue Notes HDMI input will override the Audio input signal Audio input will function only when there is no signal from HDMI input HM Audio Return Channel ARC Audio Return Channel submenu The audio return channel ARC enables an HDMI
17. re nominal values of production unit There maybe some deviations from these values in individual unit Hi General Hi Soundbar speaker Power source AC 120 V 60 Hz Power consumption 25 W Output power RMS Total 100 watts RMS Front Left Right 25 watts per channel into 4 ohms at 1 kHz 10 total harmonic distortion Subwoofer 50 watts per channel into 8 ohms at 100 Hz 10 total harmonic distortion FTC Front Left Right Minimum 24 watts per channel into 4 ohms at 200 Hz to 20 kHz 1 total harmonic distortion Subwoofer Minimum 50 watts per channel into 8 ohms at 100 Hz 1 total harmonic distortion Type Full Range speaker system 7 8 x 4 1 2 2 2 x 11 5 cm Full Range Maximum 50 W CH input power Rated input 25 W CH power Impedance 4 ohms CH 3 pieces parallel Dimensions Width 31 1 2 801 mm Height 1 1 16 26 mm Depth 2 50 mm Weight 1 46 Ibs 0 66 kg Hi Subwoofer Type Subwoofer system 6 5 16 16 cm woofer Maximum 100 W input power Rated input 50 W power Impedance 8 ohms Dimensions _ Width 4 1 2 115 mm Height 16 5 8 422 mm Depth 12 1 16 307 mm Weight 9 92 Ibs 4 50 kg Output HDMI output audio video support to terminal 1080p x 1 Input Analog input Audio in terminal Stereo mini jack 3 5 mm HDMI input audio video support to 1080p
18. rts are 20 21 22 23 24 Aar gt gt required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition Wall or ceiling mounting When mounting the product on a wall or ceiling be sure to install the product according to the method recommended by the manufacturer Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction Manual for replacement or resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug Stand Do not place the product on an unstable
19. supply to your home consult your product dealer or local power company For product intended to operate from battery power or other sources refer to the operating instructions Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the AC cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service 16 17 18 19 Replacement Parts When replacement pa
20. t have earned the ENERGY STAR are designed to protect the environment through superior energy efficiency D ENERGY STAR ENERGY STAR is a U S registered mark HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Important Safety Instructions Electricity is used to perform many useful functions but it can also cause personal injuries and property damage if improperly handled This product has been engineered and manufactured with the highest priority on safety However improper use can result in electric shock and or fire In order to prevent potential danger please observe the following instructions when installing operating and cleaning the product To ensure your safety and prolong the service life of this product please read the following precautions carefully before use 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Donotinstall near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plu
21. x 1
Download Pdf Manuals
Related Search