Nokia BH-806
Contents
1. Nokia J BH 806 Issue 2 0 Introduction About your headset With the NokiaJ headset you can handle calls hands free even when you are using two mobile devices at the same time rs Note The surface of this product does not contain nickel in the platings The surface of this device contains stainless steel Warning This product may contain small parts Keep them out of the reach of small children Parts of the product are magnetic Metallic materials may be attracted to the product Do not place credit cards or other magnetic storage media near the product because information stored on them may be erased Read this user guide carefully before using the product Also read the user guide for the device that you connect to the product For more information go to www nokia com support About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible devices such as mobile devices Devices do not need to be in direct line of sight but they must be within 10 metres 33 feet of each other The connection may be affected by obstructions such as walls or other electronic devices This device is compliant with Bluetooth Specification 2 1 EDR supporting the following profiles Headset Profile 1 1 and Hands Free Profile 1 5 Check with the manufacturers of other devices to determine their compatibility with this device Get started Keys and parts Indicator light Multif2. ards and mechanics Only use a soft clean dry cloth to clean the surface of the device Do not paint the device Paint can clog the moving parts and prevent proper operation Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling of materials Check product environmental information and how to recycle your Nokia products at www nokia com werecycle or with a mobile device nokia mobi werecycle 10 Crossed out wheeled bin symbol X The crossed out wheeled bin symbol on your product battery literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste For more information on the environmental attributes of your device see www nokia com ecodeclaration Copyright and other notices DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this BH 806 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity Nokia Nokia Connecting People and the Nokia Original Accessories logo are trademark
3. edial the last called number or use voice dialling if your mobile device supports these features with the headset Redial the last called number When no call is in progress press B Use voice dialling When no call is in progress press and hold for 2 seconds and follow the instructions in the user guide of your mobile device Change the volume Set the desired volume level on your connected mobile device The selected volume level is saved as the minimum volume level for the device that is currently connected to the headset Your headset adjusts the volume automatically according to the level of background noise Pair and connect the headset to two devices When you use the headset for the first time it automatically connects to your mobile device You can also connect your headset to another device and manage calls from for example both your personal and your work mobile device at the same time 1 To switch the headset off press and hold for 4 seconds 2 Activate pairing mode and pair the headset with the second device 3 Make sure Bluetooth is activated on both devices and switch the headset off and back on The headset connects to both devices Handle calls from two devices If your headset is connected to two mobile devices you can handle calls from both at the same time End an ongoing call and answer a call on another device Touch Put an ongoing call on hold and answer a call on another device Touch a
4. ged battery has power for up to 5 hours of talk time and up to 100 hours of standby time If you keep the headset in the carrying clip the standby time is up to 3 months When the battery charge is low the red indicator light flashes and you hear a voice prompt every 5 minutes If you have deactivated voice prompts the headset beeps every 5 minutes Check the battery charge Make sure the headset is switched on and touch and hold for 2 seconds A voice prompt tells you the battery charge level Switch the headset on or off Switch on Remove the headset from the carrying clip The headset beeps and a green indicator light flashes once The headset connects to the last connected device If you have never paired the headset with a device or you have cleared the device pairings pairing mode is activated Switch off Place the headset in the carrying clip The headset beeps and a red indicator light flashes once All active calls are ended If not connected to a device within 30 minutes the headset switches off Tip Don t have the carrying clip with you To switch the headset off press and hold for 4 seconds To switch the headset on press B Pair and connect the headset to your mobile device Before using the headset you must pair and connect it to a compatible device 1 To switch the headset off press and hold for 4 seconds 2 Switch on the device to pair with 3 Ifyou have never paired the headset with a dev
5. ice or you have cleared the device pairings switch the headset on If you have previously paired your headset with another device press and hold for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly Follow the voice prompts 4 Within 3 minutes activate Bluetooth on the device and set it to search for Bluetooth devices For details see the user guide of the device 5 Select the headset from the list of found devices 6 If required enter the passcode 0000 You can pair your headset with 8 compatible devices but you can only connect it to a maximum of 2 devices at the same time With some mobile devices you may need to make the connection separately after pairing Wear the headset Gently push the earpiece into your ear When you re not using your headset keep it in the carrying clip Tip Have your headset always at hand clip it to your pocket as you would a pen Make and receive calls To make and receive calls using your headset you need to connect it to your mobile device Make a call Make a call in the normal way Answer a call Remove the headset from the carrying clip Tip If the headset is not in the carrying clip touch B End a call Place the headset in the carrying clip Tip To end a call you can also touch B twice Reject a call Touch twice Switch a call between your headset and mobile device Touch and hold G for 2 seconds You can r
6. nd hold for 2 seconds Switch between active and held calls Touch and hold for 2 seconds End an ongoing call and activate a held call Touch B If you redial or use voice dialling the call is made on the device you last had an active call on with the headset Deactivate voice prompts Get verbal feedback and instructions for example when pairing your device Make sure the headset is switched on and touch and hold for 9 seconds You hear a voice prompt and a yellow indicator light flashes once Activate voice prompts Touch and hold for 9 seconds You hear a voice prompt and a green indicator light flashes once Clear device pairings When you clear the device pairings you need to select the language again 1 To switch the headset off press and hold for 4 seconds 2 Press and hold for 9 seconds The headset beeps twice and the red and green indicator lights alternate 3 When the headset switches on follow the voice prompts Pairing mode is activated Change the language When you change the language your device pairings are cleared and you need to pair and connect your headset to your device again 1 To switch the headset off press and hold for 4 seconds 2 Press and hold for 9 seconds The headset beeps twice and the red and green indicator lights alternate 3 When the headset switches on follow the voice prompts Pairing mode is activated Product and safety information Batte
7. ology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited Issue 2 0 EN
8. ose of batteries in a fire as they may explode Dispose of batteries according to local regulations Recycle when possible Do not dispose as household waste Use the charger for its intended purpose only Improper use or use of unapproved chargers may present a risk of fire explosion or other hazard and may invalidate any approval or warranty If you believe the charger is damaged take it to a service centre for inspection before continuing to use it Never use a damaged charger Only use the charger indoors Take care of your device Handle your device battery charger and accessories with care The following suggestions help you protect your warranty coverage eep the device dry Precipitation humidity and all types of liguids or moisture can contain minerals that corrode electronic circuits Do not use or store the device in dusty or dirty areas Moving parts and electronic components can be damaged Do not store the device in high temperatures High temperatures can shorten the life of the device damage the battery and warp or melt plastics Do not store the device in cold temperatures When the device warms to its normal temperature moisture can form inside the device and damage electronic circuits Do not attempt to open the device Unauthorised modifications may damage the device and violate regulations governing radio devices Do not drop knock or shake the device Rough handling can break internal circuit bo
9. ry and charger information This device has an internal nonremovable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device This device is intended for use when supplied with power from the following chargers AC 10 AC 6 DC 10 DC 6 DC 11 DC 11K DT 600 and CA 146C The exact charger model number may vary depending on the type of plug The plug variant is identified by one of the following E X AR U A C K or B The battery can be charged and discharged hundreds of times but it will eventually wear out Talk and standby times are estimates only Actual times are affected by for example device settings features being used battery condition and temperature If the battery has not been used for a long time to begin charging you may need to connect the charger then disconnect and reconnect it If the battery is completely discharged it may take several minutes before the charging indicator is displayed When your charger is not in use unplug it from the electrical plug and the device Do not leave a fully charged battery connected to a charger as overcharging may shorten the battery s lifetime If left unused a fully charged battery will lose its charge over time Always keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Do not disp
10. s or registered trademarks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners 2011 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Bluetooth is a registered trademark of Bluetooth SIG Inc The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice To the maximum extent permitted by applicable law under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The availability of particular products may vary by region Please check with your Nokia dealer for details This device may contain commodities techn
11. unction key 5 Earpiece Microphone db MI D bk 5 Carrying clip 6 Charger connector Start using your headset When you switch on your headset for the first time voice prompts help you set up your headset The headset comes with different sized earpads Select the earpad that fits the best and is the most comfortable for your ear To change the earpad pull the current earpad from the earpiece and push the new earpad into place 1 To switch the headset on remove it from the carrying clip If the headset doesn t switch on charge the battery 2 Gently push the earpiece into your ear 3 To select the language follow the voice prompts You can select English or Chinese Pairing mode is activated 4 To pair the headset with a compatible device follow the voice prompts Charge the battery Warning Use only chargers approved by Nokia for use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous Use of unapproved chargers may present a risk of fire explosion or other hazard 1 Connect the charger to a wall outlet 2 Place the headset in the carrying clip 3 Connect the charger cable to the charger connector in the clip The red indicator light turns green when the battery is fully charged 4 Disconnect the charger from the carrying clip then from the wall outlet When you unplug a charger hold and pull the plug not the cord The fully char
Download Pdf Manuals
Related Search