Home

Philips 6000 series Smart LED TV 40PFL6606H

Contents

1. Home theatre system Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV Optical audio output is available on certain models only Q Wl Ve HDMI Digital Audio DVD Home Theatre li Audio In ws Connect the home theatre with a SCART cable to the TV et YPbPr Audio L R DVD Home Theatre System EN 49 English Digital camera Connect the digital camera with a USB cable to the TV Digital camcorder Connect the digital camera with an HDMI cable to the TV EN 50 Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV Computer Connect the computer with an HDMI cable to the TV BN AUDIO IN HDMI J DVI VGA EN 51 English Connect the computer with a VGA cable and an audio cable to the TV AUDIO IN DVI VGA c n Computers and the Internet What you can do Network benefits If you connect your TV to a computer network with storage devices such as computers you can play the photos music and videos on your devices See Use your TV gt Browse PC through DLNA Page 19 If you connect your TV to a computer network with Internet access you can access Net TV content For more information about Net TV see Use your TV gt Browse Net TV Page 21 Note If the apparatus does not recover in DLNA mode due to external electrical disturbances e g electr
2. Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e _ The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage ever place the TV or any objects on he power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all imes e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the socket and aerial before lightning storms During ightning storms never touch any part of he TV power cord or aerial cable Risk of hearing damage e _ Avoid us
3. Note If you are prompted to select the TV connection select the connector that this device uses Remove device You can remove device icons that are not in use 1 Press fft 2 Select the device icon from the Home menu 3 Press OPTIONS then select Remove this device 4 Select OK to confirm Select a source From Home menu After you have added the new device to the Home menu select the new device icon to view tts contents 1 Press fft 2 Select the device icon from the Home menu 3 Press OK to confirm From Source menu You can also press amp SOURCE to display a list of connector names Select the connector that connects the device to the TV 1 Press amp SOURCE 2 Press the Navigation buttons to select a connector in the list 3 Press OK to confirm Play from USB If you have photos videos or music files on a USB storage device you can play the files on TV Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data in the device Do not overload the USB port If you connect an HDD device that consumes more than 500mA power make sure that it is connected to its own external power supply Access the USB content browser as follows e While you watch TV connect the USB device to the USB connector on the TV e Press fft select Browse USB then press OK Watch video Press the Navigation buttons to se
4. When available your TV can receive software updates through digital broadcasts A message appears prompting you to update the software We strongly recommend that you update the software when prompted Follow the instructions on screen Note If you choose to update the software at a later time select ft gt Setup gt Software settings gt Local updates EN 41 English Onscreen Help What you need Before you update the onscreen Help make sure that you have the following e A USB storage device that is FAT or DOS formatted e A PC with Internet access e An archive utility that supports the ZIP file format for example WinZip for Microsoft Windows or Stufflt for Macintosh Note Do not use a USB hard drive Download the latest file 1 Insert a USB storage device into the USB connector on your PC 2 Create a folder named upgrades in the root directory of the USB storage device 3 In your web browser navigate to www philips com support 4 At the Philips Support site find your product and locate the Help file for your TV The file a upg file is compressed into a zip archive 5 If the Help file is a later version than the file in your TV click it 6 Save it to your PC 7 Using an archive utility extract the upg file from the zip file 8 Save the upg file to the upgrades folder in the USB storage device 9 Disconnect the USB storage device from he
5. 4 Select Store as new channel then press OK to store the new TV channel Notes e fthe reception is poor reposition your antenna and repeat the procedure e fyou receive the channel with DVB C select Automatic in Symbol rate mode unless your cable provider supplies you with a specific symbol rate value Install satellite channels Note Available on certain models only Search for satellite is only available if the TV supports DVB S If your satellite receiver is connected to the SAT connector you can receive satellite channels 1 While you watch TV press fft 2 Select Setup gt Search for satellite gt Reinstall channels 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish and then press OK View satellite channels To watch satellite channels press ft gt Watch satellite Install digital and satellite channels Install digital channels To improve TV reception reposition the antenna You need to know the correct frequency to tune For best results contact the service provider or get a professional installer 1 Press fft 2 Select Setup gt Channel settings gt Channel installation 3 Select Digital Reception test gt Search then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the correct channel is located select Store then press
6. Ifthe TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again e fthere are intermittent sound disruptions make sure that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HD o DVI cable make sure that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased This behaviour is normal when an HDMI CEC audio device is connected EN 58 USB USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage device is compatible with the TV ake sure that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback Network Net TV does not work f the connection to the router is properly set up check the router con
7. Select the day to display e More info Display programme information e Search by genre Search TV programmes by genre e Scheduled reminders List programme reminders e Update Programme guide Update he latest programme information Use smart sound settings Select your preferred sound setting 1 While you watch TV press OPTIONS 2 Select Smart sound 3 Select one of the following settings then press OK e Personal Apply your preferred setting in the Sound menu e Standard Settings that suit most environments and types of audio e News Ideal settings for spoken audio such as the news e Movie Ideal settings for movies e Game Ideal settings for games e Drama Ideal settings for drama programs e Sports Ideal settings for sports Use smart picture settings Select your preferred picture setting 1 While you watch TV press OPTIONS 2 Select Smart picture 3 Select one of the following settings then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing e Natural Natural picture settings e Cinema Ideal settings for movies e Game Ideal settings for games e Energy saving Settings that conserve the most energy e Standard Default settings that suit most environments and types of video e Photo Ideal settings for photos e Custom Customise and s
8. e Connect your TV and the computer to the same home network See Connect your TV gt Computers and the Internet Page 52 e Switch on your computer and the router Proceed to set up a media sharing server with Windows Media Player 11 or higher or Twonky Media Server Note For help to use other media servers such as TVersity see the web site of the media server If the apparatus does not retum to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Enable sharing on Windows Media Player 11 1 Start Windows Media Player on your computer 2 Select Library gt Media Sharing e he first time you select Media Sharing a pop up screen appears Tick the Share my media box and click OK e A device marked as Unknown Device appears in the Media Sharing screen If the unknown device does not appear after a minute or so make sure that your PC firewall is not blocking the connection 3 From the Media Sharing screen select the unknown device and click Allow A green tick appears next to the device e By default Windows Media Player shares files from these folders My Music My Pictures and My Videos 4 If your files are in other folders select Library gt Add to Library and then follow the onscreen instructions to add the folders e f necessary select Advanced options to display a list of monitored folders 5 Select Library gt Ap
9. e HDM Dimensions Note Dimensions and weights are approximate values only Design and specifications are subject to change without notice Legend for TV dimensions The legends used to indicate the TV dimensions are as follows 81 cm 32 inch TV 94 cm 37 inch TV 102 cm 40 inch TV 117 cm 46 inch TV 140 cm 55 inch TV Take a note of the legend that corresponds to your TV Then go to the next page to view the dimensions EN 61 English Use your TV legend to note the weight of the TV without the stand 87 kg 97 kg 12 3 kg 16 4 kg Q6 kg 10 6 kg 124 kg 15 kg QO kg 30 kg Use your TV legend to note the dimensions of your TV with and without the stand 761 881 246 1081 1286 t mm in m on i cee 12 Xo ES ee bas SES ET un as QZ in NS 6189 02 veol zes ess EN 62 Use your TV legend to note the thickness of your TV with and without the stand 42 42 40 40 40 gt mm mm Q21 1 241 241 265 295 Help version UMv 3139 137 04122 20110325 EN 63 English 8 Index A age rating 31 analogue channels fine tune 39 analogue channels subtitles 31 audio language 37 C CAM enable 55 CAM insert 55 CAM see Conditional Access Module 55 care 7 channel list 15 channels favourites 15 channels
10. mpeg vob MPEG 3524288 Supported DLNA compliant media server software EN Windows Media Player for Microsoft Windows Twonky Media for Microsoft Windows and Mac OS X Sony Vaio Media Server for Microsoft Windows TVersity for Microsoft Windows Nero MediaHome 60 DixiM for Microsoft Windows XP Macrovision Network Media Server for Microsoft Windows Fuppes for Linux uShare for Linux Connectivity Rear PFL66x6H and PFL66x6K e EXT 1 RGB CVBS SCART e EXT 2 Component video Y Pb Pr Audio L R e SERVU Service port e AUDIO IN DVI VGA stereo 3 5 mm mini jack e SAT DVB S Available on certain models only Rear PFL66x6T e EXT 1 RGB CVBS SCART e EXT 2 Component video Y Pb Pr Audio L R e SERV U Service port eadphones Stereo 3 5 mm mini jack Bottom PFL66x6H and PFL66x6K etwork Ethernet e DIGITAL AUDIO OUT Coaxial DMI 2 HDMI e DMI 1 ARC HDMI Audio Retum Channel e Antenna 75 ohm coaxial e VGA PC input Bottom PFL66x6T e etwork Ethernet e DIGITAL AUDIO OUT Optical DMI 2 HDMI DMI 1 ARC HDMI Audio Retum Channel e AUDIO IN DVI VGA stereo 3 5 mm mini jack e Antenna 75 ohm coaxial e VGA PC input Side PFL66x6H and PFL66x6K e Cl Common Interface e SD card e USB eadphones Stereo 3 5 mm mini jack DM Side PFL66x6T e Cl Common Interface e SD card e USB
11. the video then press OK 3 With your log in information enter the online video store 4 Select the video from the list of downloaded videos then press OK to play 3 Use more of your TV Enjoy HbbTV What you can do Some broadcasters of digital channels offer interactive Hbb TV Hybrid Broadcast Broadband TV With HbbTV broadcasters combine their normal TV programme with all kinds of information or entertainment You can browse this information interactively You can respond to a programme or vote do online shopping or pay for a video on demand programme To fully enjoy HbbTV you need to connect your TV to the Internet Read more about connecting the TV to the Internet in Connect your TV gt Computers and the Internet Page 52 Note You cannot download files to your TV with this feature Navigate HbbTV pages To navigate the HbbTV pages you can use the navigation buttons colour buttons number buttons and the d back button While you watch videos within HbbTV pages you can use P play Ill pause and B stop buttons HbbTV text Some broadcasters offer HbbTV Text a new version of Text Depending on the broadcaster you might need an Internet connection to view HbbTV Text You can use the same remote control buttons to navigate HbbTV Text as you did to navigate HbbTV pages Access HbbTV When you tune to a TV channel that of
12. 880030483 local Luxemburg Luxembourg 080026550 Ortsgespr ch Appel local Magyarorsz g 06 80 018 189 Ingyenes h v s Nederland 0800 023 0076 Gratis nummer Norge 22 70 81 11 Lokalsamtale Osterreich 0800 180 016 Polska 00800 3111 318 Portugal 0800 780 902 Chamada Gratis Poccua 495 961 1111 8800 200 0880 6ecn arueii 3BOHOK no Poccun Romania 0800 894910 Apel gratuit 0318107125 Apel local Cp6uja 381 114 440 841 Lokalni poziv Slovensko 0800 004537 Bezplatny hovor Slovenija 080080254 lokalni klic Sverige 08 5792 9100 Lokalsamtal Suisse Schweiz Svizzera 0800 002 050 Schweizer Festnetztarif Tarif r seau fixe France Suomi 09 2311 3415 paikallispuhelu T rkiye 0800 261 3302 Sehirici arama United Kingdom 0870 911 0036 toll free YxpaiHcbka 0 800 500 697 This information is correct at the time of print For updated information see www philips com support PHILIPS OY 2011 Koninklijke Philips Electronics NV All rights reserved Document order number 313913704122
13. Availability of catch up TV Apps differ for each country To find out which TV programmes are available access the Net TV programme guide Find out more on Net TV services at the Net TV forum website www supportforum philips com Notes e Each country has different Net TV services e Certain websites may not display completely Some functions are not available for example file download or functions that require plug ins e Net TV services are updated automatically To view the latest updates change All to New in the App store e Net TV displays one page at a time in full screen e _ Koninklijke Philips Electronics N V bears no responsibility regarding the content and the quality of the content provided by the content service providers EN 21 English What you need To enjoy Net TV complete these tasks 1 On your home network connect the TV to the Internet 2 On your TV configure Net TV 3 On your PC register with Philips to enjoy exclusive benefits and receive updates on product information You can register now or later Notes e Youcan lock Net TV Applications Apps with a 4 digit pin code All adult Apps can be locked as one selection e When you lock an adult Application the advertisements and Web pages not adapted for Net TV remain accessible Connect the TV to the Internet On your home network connect the following 1 Connect a router with a high speed co
14. CD ROM in your PC 2 Your PC starts your Internet browser and opens the Wi Fi MediaConnect download page www philips com wifimediaconnect On the website you can check the necessary PC system requirements 3 Enter the code printed on the CD ROM envelope 4 Click the Download now button to download the free Wi Fi MediaConnect software 5 Once downloaded start the file Wi Fi MediaConnect setup exe Follow the instructions on your PC TV network name If you have more than one TV in your home network you can rename this TV To rename this TV in the network press ft gt Setup gt Network settings and select the TV network name To enter the name press OK to open the on screen keyboard or use the remote control keypad Start projecting To start projecting the PC screen on the TV click on the small TV like icon in the taskbar at the bottom right of the PC screen Your PC screen appears on your TV screen Stop projecting To stop projecting click on the TV icon again Project your PC Help To read the Wi Fi MediaConnect Help right click the program icon in the notification tray of the PC and select Help Specifics You can project high definition HD or standard definition SD video depending on the processing power of your PC e Due to output content protection certain commercial DVD or Blu ray discs may not be projected e The TV shows PC media files with a small delay e Wi F
15. EasyLink Note If you do not intend to use Philips Easylink switch it off 1 Press fft 2 Select Setup gt TV settings gt EasyLink 3 Select On or Off then press OK Control devices simultaneously If you connect multiple HDMI CEC devices that support this setting all the devices respond to the TV remote control Caution This is an advanced setting Devices that do not support this setting will not respond to the TV remote control 1 Press fft 2 Select Setup gt TV settings gt EasyLink 3 Select EasyLink Remote Control gt On or Off 4 Press OK to activate Notes e To switch back to TV control press fft then select Watch TV e To control another device press fft then select the device from the Home menu e To exit press D EasyLink buttons Control HDMI CEC compliant devices with the following buttons on the TV remote control e OK Start pause or resume play on the connected device activate a selection or access the device menu EN 34 e I lt Previous PI Next Search backwards and forwards on the connected device e Numeric buttons Select a title chapter or track e Play buttons Control video or music play e Standby Display the menu of the connected device e ft Display the TV menu e Standby Switch the TV and the connected device to standby Other EasyLink buttons are available through the On Screen Re
16. If you are prompted agree to the End User License Agreement Wireless LAN ready This TV is Wireless LAN ready With the Wireless LAN adapter PTAO1 accessory sold separately you can connect the TV to your home network wirelessly You can enjoy the best of the web from Net TV services and sharing of content between your devices connected to the home network using Wi Fi MediaConnect or DLNA seamlessly and hassle free Note e he wireless network operates in the same 2 4GHz frequency spectrum as common household devices such as Dect phones microwave ovens or Bluetooth devices which can cause Wi Fi interferences Move these devices away from the TV with the connected Wireless USB adapter e You should turn off any unused network equipment in the home network as this increases network traffic e Reception quality is dependent on the location of the wireless router as well as the quality of services provided by the local Internet Service Provider e When playing video over your wireless home network we recommend that you use an IEEE 802 11 N router The connection speed may differ according to the operating environment of your wireless home network Make your TV wireless 1 Switch on your wireless network router 2 Insert the USB adapter PTAO1 into the USB connection at the side of the TV The wireless installation starts automatically 3 Follow the on screen instructions WPS Wi Fi Protected S
17. OK 7 Press 2 to exit Fine tune channels If the reception of an analogue TV channel is poor fine tune the TV channel 1 Press fft 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Fine tune and then press OK 4 Press A or V to fine tune the channel 5 When you have selected the correct channel frequency select Done and then press OK 6 Select one of the following options then press OK e Store current channel Store the channel as the current channel number e Store as new channel Store the channel as a new channel number EN 39 English Reinstall channels ATTENTION This feature is intended for dealers and service personnel You can copy channel lists from one Philips TV to another through a USB storage device You do not need to search for channels or install them again on the second V The channel list file is small enough to fit on any USB storage device What you need The two Philips TVs must have e the same country setting e the same year range e the same DVB type as indicated by the suffix H K T or D OO in the model name e he same settings for satellite channels including the number of LNB satellites e the same hardware type as indicated by he sticker on the back of the TV for example Q oooocLx and e compatible software versions An onscreen message will no
18. TV screen 3 Control the audio playback with the TV remote control EN 35 English 4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While you watch TV press fft 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Start then press OK 4 Follow the onscreen instructions to choose your preferred settings Picture and sound e PC mode Allow picture settings to be changed when a PC is connected to the TV through HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content e Light sensor Adjust settings dynamically to match lighting conditions e Picture format Change the picture format e Screen edges Change the picture size e Picture shift Adjust the position of the picture You cannot select this setting if the selected picture format is Auto zoom or Wide screen More picture settings 1 Press fft 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust e Smart picture Access predefined smart picture settings e Reset Reset to default settings e Contrast Adjust the intensity of the bright areas keeping dark areas unchanged e Brightness Adjust the intensity and details of the dark areas e Colour Adjust colour saturation e Hue Compensate colour var
19. appears on the TV display The TV is in Shop mode To remove the e sticker set the TV to Home mode then restart the TV Position the TV gt Location Page 9 The computer display on the TV is not stable e Make sure that your PC uses the supported resolution and refresh rate See Product specifications gt Display resolutions Page 59 e Setthe TV picture format to Unscaled Sound There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction ake sure that all cables are properly connected ake sure that the volume is not muted or set to zero ake sure that the TV speakers setting is selected Press tff ADJUST select Speakers and then select TV ake sure that the TV audio output is connected to the audio input on the DMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers There is a picture but the sound quality is poor Make sure that the sound settings are correctly set There is a picture but sound comes from one speaker only Make sure that sound balance is set to the centre EN 57 English HDMI There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e
20. fine tune analogue 39 de or unhide 38 channels h channels install automatic 38 channels install manual 39 channels reinstall 40 channels rename 37 channels reorder 37 channels switch 15 channels update 38 child lock 30 dock 30 common interface 55 computer play files 21 computer see PC 52 Conditional Access Module 55 connect device 44 connect PC 51 connect USB 17 connectors 4 contact information on Internet 10 contact Philips 10 controls 11 EN 64 D demo 41 devices add 17 devices watch 17 a igital channels 39 a igital channels subtitles 31 a igital radio 15 dimensions 61 display 59 display resolution 59 DLNA 19 E EasyLink controls 34 EasyLink enable 34 EasyLink features 33 EasyLink RC key forward 34 EasyLink TV speakers 34 Electronic Programme Guide 15 end of use 8 environment efforts 7 environment recycle 8 EPG Electronic Programme Guide 15 EPG menu 15 F factory settings 37 favourites list add 15 H bbTV 25 bbTV block reception 25 DMI 43 DMI ARC 43 hearing impaired 32 help onscreen 10 high definition HD content 5 home menu 3 home mode 9 install channels 38 install channels automatic 38 install channels manual 39 K kensington
21. is he Internet Read morg about connecting connected to its own extemal power supply he TV to the Internet in Page 52 Once the USB hard disk device is formatted To record programmes with the USB hard for this TV you cannot use the recordings disk device ensure your TV is connected to on another TV Do not copy or change he Internet Read more about connecting recording files on the USB hard disk through he TV to the Internet in Page 52 any PC application This will corrupt your f you cannot connect to the Internet you recordings can still pause live TV broadcasts To pause Before you can pause or record a broadcast broadcasts you need a USB hard disk with a you must format the connected USB hard minimum size of 32 GB hard disk space disk device Connect the USB hard disk to the USB 1 Connect the USB hard disk to the USB connector on the side of the TV If you need connector on the side of the TV If you are extra USB connectors use a USB hub using a USB hub for connection do not connect any other USB device to the TV when you are formatting the USB hard disk 2 Switch on the device and the TV 3 When the TV is tuned to a digital TV channel press Hl pause to start formatting Formatting removes all data from the connected USB hard disk device Follow the instructions on screen When the USB hard disk is formatted keep the device connected permanently EN 26 Pause live broadca
22. is properly connected to the TV e Make sure that the correct device is selected as the display source e _ Make sure that the external device or source is properly connected There is sound but no picture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection ake sure that the antenna is properly connected to the TV e loud speakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices ake sure that the devices are connected properly ake sure that the picture settings are set correctly The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Try a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information
23. only Other solutions Use the Component Video Y Pb Pr are possible connection together with an Audio Left and Tip If your device only has composite or Right connection for sound RCA connectors use a SCART cinch Y Pb Pr can handle high definition HD TV adapter to connect the device to a SCART signals connector on the TV Match the Y Pb Pr connector colours to the HDMI cable plugs An HDMI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Use HDMI for high definition HD TV signals and to enable EasyLink e An HDMI Audio Return Channel ARC connector allows output of TV audio to an HDMI ARC compliant device e Do not use an HDMI cable longer than 5 meters 16 4 feet EN 43 English SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle high definition HD TV signals Connect devices VGA Use this connection to display PC content on the TV For video and sound use the VGA and AUDIO IN connectors Overview You can connect your devices to the TV with any of the following options After connection press ft gt Add your devices E EN 44 Select a device with arrows up or down fo Press OK when this Is done 20E Horne Teegire v Select the TV connection you a have used to connect the device 7 Press OK when this
24. the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones get set for digital V EN English Digital UK the body leading the digital TV switchover will advise you when you need to re tune during the switchover If you do not re tune your channels when advised to do so by Digital UK you may lose some or all of your channels until you do re tune You should re tune your TV every few months to check for any new channels If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by switchover and you won t need to re tune If you have any questions please contact your equipment supplier or call Digital UK on 0845 6 50 50 50 or visit www digitaluk co uk How to re tune Press h on the remote control Select Setup and press OK Select Search for channels and press OK Select Reinstall channels and press OK Select your country UK and press OK Select Antenna DVB T and press OK Select Start and press OK he installation can take several minutes WN EE oqInN OW When the installation is complete press OK Your TV is now retuned If you are missing any channels it may be that they are not available in your area or that your aerial needs upgrading When does switchover happen Copeland switches on Oct
25. to register or enter your login 2 Select a video 3 Make the online payment 4 Download a video What you need To rent and download a video you need a high speed Internet connection to the TV Read more about network connections in Connect your TV gt Computers and the Internet Page 52 You also need an SD memory card to insert into the TV SD card slot SD memory size Use a blank SD memory card of type SDHC class 6 with at least 4 GB of storage capacity For high definition video make sure that you use an SDHC card with at least 8 GB of storage capacity Note If the write speed is insufficient for video transfer the TV rejects the SD card Caution This TV has a standard SD card slot that can be used only for renting video Follow the instructions described here If you insert the card incorrectly you might damage the card All existing content on the SD card is erased before you download rented videos EN 23 English Format an SD card Before you download rented videos your SD card must be formatted 1 Switch on the TV 2 As illustrated insert the SD memory card into the SD card slot on the side of the TV The TV automatically starts formatting the card 3 After formatting leave the SD card in the slot Rent View a video store 1 Press fft 2 Select Browse Net TV and press OK 3 Access the App Gallery to search for available video stores in your countr
26. Digital text services are blocked when subtitles are broadcast and enabled on the TV Read Use more of your TV gt View subtitles Page 31 Teletext language Some digital TV broadcasters provide several teletext languages You can set your primary and secondary language 1 Press fft 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Primary Text or Secondary Text 4 Select your preferred teletext languages then press OK Subpages A teletext page can contain several subpages These subpages are shown on a bar next to the main page number If subpages are available on a teletext page press or P to select them Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default To switch Teletext 2 5 on or off 1 Press fft 2 Select Setup gt TV settings gt Preferences 3 Select Text 2 5 gt On or Off then press OK EN 29 English Set locks and timers Clock You can display a clock on the TV screen The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press OPTIONS 2 Select Status then press OK The clock is displayed on the lower right hand corner of the TV screen Change the clock mode The clock mode is automatically synchronised to the Coordinat
27. K If you have WPA security on your router enter the passphrase with the remote control To access the on screen keyboard select the text entry field and press OK If you have WEP security encryption the TV asks for the WEP encryption key in hexadecimal numbers Find this hexadecimal key in the router software on your PC Write down the first key of the WEP keys list and enter it on the TV with the remote control If the security key is accepted the TV is connected with he wireless router f asked agree to the End User License Agreement f you are using the Wireless USB adapter keep it connected to the USB connector on he TV Wi Fi MediaConnect What you can do With Wi Fi MediaConnect you can project your PC screen on the TV wirelessly With he Wi Fi MediaConnect CD ROM you can download the software for free Wi Fi ediaConnect is only available for PC The Wi Fi MediaConnect CD ROM is supplied with the Wireless USB adapter PTAO1 For Wi Fi integrated models the CD ROM is supplied with the TV EN 54 What you need To use Wi Fi MediaConnect you need the following e Connect the TV to your home network e Awireless router e A wireless USB adapter only for TVs which are not Wi Fi integrated For the availability of the wireless USB adapter check with your local retailers or buy online at www philips com tv Install Wi Fi MediaConnect 1 Insert the Wi Fi MediaConnect
28. PC EN 42 Update Help e Do not switch off the TV or remove he USB storage device during the update e fapower failure occurs during the update do not remove the USB storage device from the TV The TV continues o update as soon as power is restored e fan error occurs during the update retry the procedure If the error reoccurs contact Philips Consumer Care 1 Switch on the TV 2 Disconnect all other USB devices from the TV 3 Connect the USB storage device containing the upg file to the USB connector on the TV 4 Press fft 5 Select Setup gt Software settings gt Local updates The updates screen appears 6 Select the upg file and press OK A message displays the update status 7 Follow the onscreen instructions to complete the update and restart your TV Reinstall the TV Reinstall your TV to reset all picture and sound settings and reinstall all TV channels 1 Press fft 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the onscreen instructions 5 Connect your rare TV About cables Cable quality Overview Before you connect devices to the TV check the available connectors on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of icture and sound E E Y Pb Pr The connections shown in this user manual l are recommendations
29. Register your product and get support at www philips com welcome 32PFL66x6 37PFL66x6 40PFL66x6 46PFL66x6 55PFL66x6 32PFL66x6K 37PFL66x6K 40PFL66x6K 46PFL66x6K 55PFL66x6K 32PFL66x6T 3 PFL66x6T 40PFL66x6T 46PFL66x6T 55PFL66x6T ul apo le caper SIE EN User Manual PHILIPS Contents EN 1 Get started 3 TV tour 3 Important 6 Environmental efforts 7 Position the TV 8 Help and support 10 2 Use your TV 11 Controls 11 Watch TV 14 Watch a connected device 17 Ambilight 18 Browse PC through DLNA 19 Browse Net TV 21 Rent online video 23 3 Use more of your TV 25 Enjoy HbbTV 25 Smart USB recording 26 View Teletext 28 Set locks and timers 30 View subtitles 31 View Scenea 31 Set universal access 32 Use EasyLink 33 4 Setup your TV 36 Settings assistant 36 Picture and sound 36 Channels 37 Menu language 40 Other settings 41 Update software 41 Reinstall the TV 42 5 Connect your TV 43 About cables 43 Connect devices 44 Connect more devices 51 Computers and the Internet 52 Common interface 55 Troubleshooting 56 Contact Philips 56 General TV 56 TV channel 56 Picture 57 Sound 57 HDMI 58 USB 58 etwork 58 Product specifications 59 Power and reception 59 Display and sound 59 Display resolutions 59 ultimedia 60 Connectivity 61 Dimensions 61 Help version 63 Index 64 1 Get started TV tour Remote control To open or close the Home menu In th
30. TV remote control To switch on EasyLink Remote Control see Use more of your TV gt Use EasyLink gt Control devices simultaneously Page 34 Retain picture quality If your TV picture quality is affected by the picture processing features of other devices switch on Pixel Plus Link To switch on Pixel Plus Link see Use more of your TV gt Use EasyLink gt Retain picture quality Page 35 Maximize display for subtitled video While you view subtitles in a video you can maximize the video display area Some subtitles can create a separate subtitle bar under the video which limits the video display area After you switch on auto subtitle shift the subtitles display on top of the video image which maximizes the video display area To switch on auto subtitle shift see Use more of your TV gt Use EasyLink gt Maximize display for video with subtitles Page 35 Hear another device at standby You can hear a connected HDMI CEC compliant device through the TV speakers even when the TV is in standby To switch on see Use more of your TV gt Use EasyLink gt Hear another device at TV standby Page 35 EN 33 English What you need To benefit from Philips EasyLink advanced control features make sure that you do the following e Connect at least two HDMI CEC compliant devices through HDMI e Configure each HDMI CEC compliant device properly e Switch on EasyLink Switch on To switch on or off
31. aring 6 Browse and select folders to share and then select Save Changes Your Macintosh rescans the folders automatically so that they are ready to share Play files from computer Note Before you play multimedia content from the computer make sure that the TV is connected to the home network and the media server software is properly set up 1 Switch on the computer and the router 2 Switch on your TV 3 Press fft on the remote control 4 Select Browse PC then press OK If the network installation starts follow the onscreen instructions 5 If the content browser is displayed select a file then press OK The file starts to play 6 Press the Play buttons on the remote control to control play View pictures e To play a picture slideshow select a photo then press OK e To pause or stop playback press OK again e To play the previous or next file press I4 or Pl Press ize OPTIONS to access one of the following options e Show info Display the file information e Stop Stop slideshow e Rotate Rotate the file e Repeat Repeat the slideshow Browse Net TV What you can do Enjoy Internet Applications Apps specially adapted internet websites for your TV You can control the Apps with the TV remote control For example you can e Read newspaper headlines e Watch videos e Check weather forecasts Use the catch up TV feature to watch TV programmes that you missed
32. ary subtitles for the preferred language 4 Press OK to confirm Tip You can also press OPTIONS gt Subtitle language View Scenea Analogue channels 1 Switch the TV to an analogue TV channel 2 Press TEXT 3 Enter the three digit page number of the subtitles page usually 888 4 Press D to exit teletext Subtitles display if available U Uc m What you can do You can display a default picture as the wallpaper on your TV You can also load another picture as the wallpaper If the sleeptimer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer What you need To use another picture as the wallpaper you need a USB storage device that contains a picture that is less than 1 MB in size Digital channels 1 Press OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or On during mute then press OK Note e If MHEG application is activated subtitles are not displayed e fyou select On during mute subtitles are displayed only when you press amp to mute the sound Switch on 1 Press fft 2 Select Scenea then press OK The default picture is displayed Note The wallpaper is displayed for the duration of the sleeptimer For more information on sleeptimer see Use more of your TV gt Set locks and timers gt Sleeptimer Page 30 EN 31 Engli
33. c channel update gt Off Update channel list When the TV was switched on for the first time a full installation of channels was performed You can automatically add or remove digital channels or manually update channels Note If you are prompted to enter a code enter 8888 Automatic update To automatically add or remove digital channels leave the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list If a channel update is performed a message appears at startup If you do not want this message to appear 1 Press fft 2 Select Setup gt Channel settings or Satellite settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK EN 38 Automatic install When the TV was switched on for the first time a full installation of channels was performed You can run this full installation again to set your language country and install all available TV channels Select network To install cable or antenna channels you need to switch to the respective network 1 While you watch TV press fft 2 Select Setup gt Channel settings 3 Select Channel installation gt Antenna or Cable DVB 4 Select one of the following settings e Antenna DVB T Access free to air antenna or digital DVB T channels Cable Access cable or digital DVB C channels Press OK to
34. cation e Swap Swap location with another channel 6 Once complete press OPTIONS and select Exit Rename channels After the channels are installed you can rename them to your preference 1 While you watch TV press Q FIND The channel list is displayed 2 Select the channel to rename and press iz OPTIONS 3 Select Rename then press OK 4 In the entry screen press the Navigation buttons or Numeric buttons to edit the name then press OK Tip You can press OK in the entry screen to enable the Onscreen Keyboard 5 Once complete press the Navigation buttons to select Done e To clear the entry select Clear e Tlocancel select Cancel 6 Press OK to confirm 7 Press D to exit EN 37 English Hide or unhide Hide channels To prevent unauthorised access to channels hide them from the channel list 1 While you watch TV press Q FIND 2 Select the channel to rename and press OPTIONS 3 Select Hide channel then press OK The channel is hidden Unhide channels 1 While you watch TV press Q FIND 2 Press OPTIONS 3 Select Show hidden channels then press OK Hidden channels appear in the channel list but the channel information is not displayed 4 Select a hidden channel then press OPTIONS 5 Select Unhide all then press OK All hidden channels are displayed To disable automatic updates In the Channel installation menu select Automati
35. ck when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 Press the green button to turn on audio feedback or press the red button to turn it off 3 Press D to exit Use EasyLink What you can do Get the most out of your HDMI CEC compliant devices with Philips EasyLink enhanced control features If your HDMI CEC compliant devices are connected hrough HDMI you can control them at the same time with your TV remote control Note Other brands describe HDMI CEC functionality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink After you switch on Philips EasyLink these features are available One touch play When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC compliant devices switch to standby mode System audio control If you connect an HDMI CEC compliant device that includes speakers you can choose to hear the TV from those speakers instead of the TV speakers For more information about TV audio output see Use more of your TV gt Use EasyLink gt Select speaker output Page 34 EasyLink remote control You can control multiple HDMI CEC compliant devices with your
36. confirm Press D to exit tart installation Press fft Select Setup gt Search for channels then press OK 3 Follow the onscreen instructions to complete the channel installation 4 Once complete select Finish then press OK Tip Press Q FIND to see the channel list Notes e During installation leave settings unchanged unless your digital provider gives you the specific values to enter e When digital TV channels are found the list of installed channels may display empty channel numbers You can rename reorder or uninstall these channels nm DNA U OREN Install analogue channels You can search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press fft 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual installation menu select Find channel then press OK 2 Select one of the following options e Press the Navigation buttons or Numeric buttons to manually enter the channel frequency e Select Search then press OK to search for the next channel automatically 3 When the correct channel frequency is entered select Done then press OK
37. country contact your Philips dealer or visit www philips com support Ambilight Available on certain models only Ambilight gives a more relaxed viewing experience It automatically adjusts the colour and brightness of the light to match the TV picture Read more in Use your TV Ambilight Page 18 Network Internet Router Connect your TV to your home network to play music photos and videos from a computer or other media server on the same network Read more in Connect your TV gt Computers and the Internet Page 52 Net TV If your home network is connected to the Internet you can connect your TV to Net TV Net TV offers movies pictures music and much more Read more in Use your TV Browse Net TV Page 21 EN 5 English Important Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from he power outlet immediately Contact Philips Consumer Care to have the TV checked before use ever insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen c
38. e Home menu access connected devices picture and sound settings and other useful features SOURCE To open or close the Source menu In the Source menu access connected devices To open or close the Text menu In the Text menu access teletext for news and information OPTIONS ne To open or close the Options menu Options menus offer convenient settings for To retum to the previous menu page or to exit from a TV function Press and hold to retum to watching TV To select a red menu option access digital Interactive TV services or watch TV demonstration clips Available on certain models only EN 3 English Connect devices To select a green menu option or to access energy efficient settings To select a yellow menu option or to access he electronic user manual Read more about the remote control in Use your TV gt Controls gt Remote control For the best picture and sound quality connect a DVD Blu ray disc player or game Page 11 Alternatively look at the index in Search console trough ee 1 Tons To watch a non EasyLink compliant device add it to the Home menu 1 Press ft gt Add your devices 2 Follow the onscreen instructions Press A to select the next TV tour Note If you are prompted to select the TV connection select the connector that this device uses See Connect your TV gt Connect devices Page 44 for informatio
39. e languages are available select the preferred language 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select one of the following settings then press OK e Primary audio Secondary audio Select the available audio language Set a secondary language in the same menu If the primary language is unavailable the TV receives this language e Preferred audio format Select to receive standard audio format MPEG or advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo Select mono or stereo audio if stereo broadcasting is available 4 Press to exit Channels Reset to factory settings You can restore default picture and sound settings while the channel installation settings remain the same 1 While you watch TV press fft 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset to default Reorder and rename Reorder channels After the channels are installed you can reorder the channel list to your preference 1 While you watch TV press Q FIND The channel list is displayed 2 Select the channel to reorder and press iz OPTIONS 3 Select Reorder then press OK 4 Press the Navigation buttons to move the highlighted channel to another location then press OK 5 Select one of the following options then press OK e Insert Insert the channel into the desired lo
40. ed Universal Time UTC If your TV cannot receive UTC transmissions change the clock mode to Manual 1 While you watch TV press fft 2 Select Setup gt TV settings gt Preferences 3 Select Clock gt Auto clock mode 4 Select Automatic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent you can enable or disable daylight saving for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection 3 Select Done then press OK EN 30 Sleeptimer Sleeptimer switches the TV to standby after a specified time You can switch off your TV earlier or reset the sleeptimer during the countdown 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Sleeptimer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of five minutes The sleeptimer is switched off if it is set to zero minutes 4 Press OK to activate the sleep timer The TV switches to standby after the specified time Child lock To protect children from un
41. eletext subpages 29 U universal access enable 32 universal access hearing impaired 32 universal access visually impaired 32 USB recording 27 V visually impaired 32 volume 11 W wall mount 9 wallpaper 32 Wi Fi MediaConnect 54 Wireless LAN ready 53 EN 66 Notice 2011 Koninklijke Philips Electronics N V A II rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reser ves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents N o further warranty is expressed or implied Philips cannot be held responsible either for any errors in the content of this document or for any problems as a result of the content in this document Errors reported to Philips will be corrected and published on the Philips support Website as soon as possible Terms of warranty e Risk of injury damage to TV or void of warranty N ever attempt to repair the TV yourself Use the TV and accessories only a
42. ent injury or damage Before you mount the TV e Purchase a Philips TV mount or a compatible TV mount e Forcertain models remove the wall mount plugs from the back of the TV e To prevent damage to cables and connectors leave a gap of at least 5 5 cm or 2 2 inches from the back of the TV e Check your TV screen size and match it against the list for the type of wall mount to purchase 81 cm 32 inches 200mm x 200mm 94 cm 37 inches 200mm x 200mm 102 em 40 inches 400mm x 400mm 117 cm 46 inches 400mm x 400mm 140 em 55 inches 400mm x 400mm Screw length Before you wall mount the TV find the correct length of screw by adding the thickness of your wall mount to the screw length For 32 inch to 46 inch TV OA DN DN DN DN min 11mm max 12mm For 55 inch TV min 15 mm max 18 mm Location A range of TV settings are applied to suit the location of the TV Shop or home mode Set the TV location to Home mode to access all TV settings In Shop mode you can access only a few settings 1 While you watch TV press fft 2 Select Setup gt TV settings gt Preferences 3 Select Location gt Home or Shop then press OK 4 Restart the TV Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV Purchase a Kensington anti theft lock not supplied to secure the TV K EN 9 English Help and suppor
43. erent from that of the TV whose channel list you want to copy reinstall the TV and select the country setting to match the first TV See Set up your TV gt Reinstall the TV Page 42 5 Connect the USB storage device containing the channel list to the TV where you want to copy the channel list 6 Select Setup gt TV settings gt Preferences gt Channel list copy gt Copy to TV then press OK The channel list is copied to the TV storage device 7 Unplug the USB storage device Menu language 1 While you watch TV press fft 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Other settings TV demo Start a demo to find out more about your TV s features Note Demos are not supported on MHEG channels 1 While you watch TV press fft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press D to exit Update software TV software Check software version 1 Press fft 2 Select Setup gt Software settings gt Current software info then press OK The version of the current software is displayed Caution Do not install a lower version of software than the current version installed on your product Philips cannot be held liable or be made responsible for problems caused by a software downgrade Update the software through one of these options e update wit
44. etup If your router supports WPS Wi Fi Protected Setup press the WPS button on the router Retum to the TV in 2 minutes select WPS and press OK The TV connects to your network This takes about 2 minutes Complete the installation Most new wireless routers have the WPS system and carry the WPS logo The WPS system uses WPA security encryption and cannot be combined with devices on your network that use the WEP security encryption If you still need this WEP device in your network install with Scan gt Custom Scan for routers If you have several routers in your network you can select the network you need To select a specific network router press Scan on the first page of the installation The routers with WPS and the strongest signal are shown first in the list on screen Select the router you need If you are connecting a WPS router select WPS on the TV e fyou have set the PIN code in your router software select WPS pincode and enter the code EN 53 English e To enter the encryption key manually select Custom and enter the key PIN code To set the secured connection with a PIN code select the PIN code and press OK Write down the 8 digit PIN code shown on the TV and enter it in the router software on your PC See the router manual for where to enter the PIN code Custom To enter the encryption key the security key manually select Custom and press O
45. f the recording starts You can use the P play P gt forward rewind M pause or lil stop keys on the remote control to control play EN 28 Schedule a recording Set a recording for a programme on a specific channel by entering its date and time without selecting a programme from the electronic programme guide Press fft and select Programme guide Select Schedule and press OK You need to set the channel date and time span in the following pages Remove a scheduled recording To remove a scheduled recording select the red circle in front of the recording and press OK Delete a recording To remove a recording select the recording in the list and press OPTIONS and select Delete recording Programme information To view more information on a programme select the programme in any programme guide list and press OK Depending on the status of this programme you can start watching it schedule its recording play back the recording or delete the recording from this page View Teletext Select a page 1 Select a channel that has teletext feature then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press AV or I4 Pl to view the next or previous page e Press the Colour buttons to select a colour coded item 3 Press gt to exit Teletext options 1 When you view teletext press OPTIONS 2 Selec
46. fers HbbTV the interactive pages will open automatically or at some point you will be invited to open them Depending on the broadcaster you might need to press the red button or OK on the remote control to access the page To exit the HbbTV pages select the relevant button on screen and press OK Block HbbTV You can block HbbTV completely To block HbbTV press OPTIONS and select HbbTV on this channel gt Off EN 25 English Smart USB recording What you can do With this TV you can pause a live TV broadcast from a digital channel Connect a USB hard disk to your TV and you can pause the live broadcast If your TV is connected to the Internet you can also set a programmed recording of a digital broadcast What you need Smart USB recording and Pause TV work only with digital TV channels DVB broadcast or similar To pause or record a digital broadcast you Installation need to connect a USB hard disk Use a USB Caution Philips is not responsible if the USB 20 compatible hard disk with a minimum of hard disk device is not supported nor is it 250 GB hard disk space Ensure that the USB responsible for damage or loss of data in the hard disk supports a minimum transfer speed device of 30MBps To record programmes with the USB hard disk device ensure your TV is connected to Do not overload the USB port If you connect an USB device that consumes more than 500mA power make sure that it
47. g picture settings You can apply a combination of energy saving picture settings While you watch TV press the green button and select Energy saving e Power switch You can completely cut off power to the TV with the power switch It is located at the base of the set e Screen off If you only want to listen to audio from the TV you can turn off the TV display Other functions continue to operate normally e Light sensor The built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens e Low standby power The advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality EN 7 English Power management The advanced power management of this TV ensures the most efficient use of its energy To view how your personalised TV settings affect the TV s relative power consumption press fft and select Setup gt Watch demos gt Active Control End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused 4Y ae When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local ru
48. h USB flash drive e update from digital broadcast e update from the Internet For more information see the following pages Update with USB Before performing this procedure make sure that you have the following e Spare time to complete the entire update e A USB flash drive that has at least 256MB of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB port and internet access Note Do not use a USB hard drive 1 Press fft 2 Select Setup gt Update software then press OK The update assistant starts 3 Follow the onscreen instructions to start the update Note The update assistant directs you to the Philips support website Refer to the installation instructions on the website to complete the update Update from the Internet To update the TV software directly from the nternet connect the TV to the Internet hrough a router with a high speed connection 1 Press f gt Setup gt Update software hen press OK 2 Select Internet then press OK 3 Follow the onscreen instructions to start he update When the update is complete the TV switches off and back on again automatically Wait for the TV to switch back on Do not use the power switch on the TV or the remote control Note If the TV is connected to the Internet the TV displays the availability of new software at startup Update from digital broadcast
49. i MediaConnect is available for PC only Project your PC PC requirements Minimum specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 1 8 GHz e 512MBRAM e 200 MB free hard disk space e Wi Fi 80211g e Internet connection Project your PC PC requirements Recommended specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 2 1 GHz e 1GBRAM e 200 MB free hard disk space e Wi Fi 80211n e Internet connection Common interface What you can do To watch some digital TV programmes you need a Conditional Access Module CAM If a CAM is inserted and subscription fees are paid you can watch the channel The applications functions the content and the onscreen messages vary for each CAM service What you need Caution To protect the CAM from damage insert the CAM according to these instructions Notes e his TV supports Cl as well as CI CI allows service providers to offer premium HD digital programmes with a high level of copy protection e Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV 3 Push the CAM in as far as it will go then wait for the CAM to be activated This takes a few minutes To prevent digital services fro
50. i TV Remote Follow the instructions provided at the Apps store Ensure that your TV is connected to the same network as your iPhone Read more about network connections in Connect your TV Computers and the Internet Page 52 EN 13 English Watch TV Switch TV on or off Switch the TV on e Press the power switch at the base of he TV to the ON position e If the TV is in standby press on the remote control ote There is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press CH on the front of the TV hough your TV consumes very little energy in standby it does use some energy If you are not going to use the TV for an extended period of time switch it off to cut off the power Switch TV to standby Press on the remote control The remote control sensor on the TV switches to red Switch off the TV Press the power switch at the base of the TV to the OFF position he TV no longer consumes energy Automatic switch off his TV is designed with energy efficiency settings If there is no user interaction such as pressing a remote control button or a control on the front panel for four hours the TV will automatically switch to standby EN 14 To disable automatic switch off While you watch TV press the green button on the remote control Select Auto switch off and press OK An
51. iations in NTSC encoded transmissions e Sharpness Adjust sharpness in the image e Noise reduction Filter and reduce noise in the image e Tint Adjust the colour balance in the image e Custom tint Customise tint setting e Pixel Plus HD Pixel Precise HD Access advanced settings including HD Natural Motion 100 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma EN 36 More sound settings 1 Press fft 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to adjust e Smart sound Access predefined smart sound settings e Reset Reset to factory default settings e Bass Adjust the bass level e Treble Adjust the treble level e Surround Enable spatial sound e Headphones volume Adjust headphone volume e Auto volume leveling Automatically reduce sudden volume changes for example when switching channels e Balance Adjust the balance of the left and right speakers Audio settings Select audio language If the TV channel has multiple or dual sound broadcast you can select the preferred audio language While you watch TV press OPTIONS e Audio language Select the audio language for digital channels e Dual II Select the audio language for analogue channels Digital TV channels can stream several audio languages If multipl
52. ility EMC directive 2004 108 EC the mains plug on this product must not be detached from the mains cord e Ifthe apparatus does not recover in DLNA Net TV mode user intervention is required Mains fuse UK only ThisTV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Copyright W indows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries I DOLBY DIGITAL PLUS PULSE Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories EN dina CERTIFIED DLNA the DLNA Logo and DLN A CERTIFIED are trademarks service marks or certification marks of the D igital Living Network Alliance HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HD MI licensing LLC in the United States and other countries K Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applicatio
53. ing earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting he TV to the power outlet e _ Avoid stationary images as much as possible Stationary images are images that remain onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage Environmental efforts Screen care e Risk of damage to the TV screen Never ouch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible Energy efficiency Philips continuously focuses on lowering the environmental impact of our innovative consumer products We aim our efforts towards environmental improvements during manufacturing reduction of harmful substances energy efficient use end of life instructions and product recycling To access energy efficient settings While you watch TV press the green button on the remote control These energy efficient settings include e Energy savin
54. lect a video file then press OK e Press 4 or f to search forward or backward within a video e Press and hold to exit the content browser While you play video press OPTIONS to access the following video options e Stop Stop playback e Repeat Repeat a video e Shuffle on Shuffle off Enable or disable random play of videos EN 17 English Listen to music Press the Navigation buttons to select a music track then press OK e Press lt 4 PP to search forward or backward within a track e Press and hold 5 to exit content browser Press OPTIONS to access or exit the following music options e Stop Stop audio play e Repeat Repeat a track or an album Play once Play the track once e Shuffle on Shuffle off Enable or disable random play of tracks View picture Press the Navigation buttons to select a picture then press OK e To pause or stop play press OK e To skip to the previous or next file press I4 or Pl e Press and hold D to exit conten browser Press OPTIONS to access or exit the following picture options e Show info Display the file information e Stop Stop slideshow e Rotate Rotate the file e Repeat Repeat the slideshow e Play once Play the file once e Shuffle off Shuffle on Enable or disable random display of pictures in the slideshow e Slideshow speed Set the display time for each pictu
55. les and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Position the TV Placement e Before you position the TV read all safety precautions See Get Started gt Important gt Safety Page 6 e Position the TV where light does not shine directly on the screen e he ideal distance from which to watch TV is three times its diagonal screen size For example if the diagonal screen size of the TV is 116cm 46 the ideal viewing distance is 3 5m 138 from the front of the screen e While seated your eyes should be level with the centre of the screen Stand mount or wall mount To apply the best settings for your TV select wall mount or stand mount 1 In the Preferences menu select TV placement 2 Select On a TV stand or Wall mounted then press OK Wall mount Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accid
56. lock 9 L language menu 40 location home or shop 9 M media server software Mac 20 media server software PC 20 imedia 60 multimedia play files 17 mu mute TV speakers 34 N Net TV browse 21 O online video rent 23 P Pause live broadcast 27 PC connect 51 PC display resolutions 59 picture format 36 picture settings 36 Pixel Plus link 35 placement stand or wall mount 8 position the TV 8 power 59 R recording USB 27 recycle 7 register product 10 reinstall TV 42 remote control 11 remote control batteries 12 remote control onscreen 34 remote control overview 11 rename channels 37 reorder channels 37 S safety 6 Scenea enable 31 Scenea see screen saver 32 screen saver 31 SD card format 23 SD card memory size 23 settings assistant 36 settings picture 36 settings sound 36 shop mode 9 sleeptimer 30 smart picture 16 smart sound 36 Smart USB 26 software digital update 41 software Internet update 41 software version 41 sound settings 36 subtitle analogue 31 subtitle digital 31 subtitle language 31 switch TV on off 14 EN 65 English eletext 2 5 29 eletext digital text 29 eletext dual screen 29 eletext enlarge 29 eletext language 29 eletext search 29
57. m being deactivated do not remove the CAM from the slot when it is in use Watch CAM services 1 After inserting and activating the CAM press OPTIONS 2 Select Common interface then press OK 3 Select the CAM provider and press OK EN 55 English 6 Troubleshooting Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty If you cannot resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also contact Philips Consumer Care in your country for support You can find the contact number in the leaflet that accompanies the TV Take a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging General TV The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Make sure that the power cable is securely connected e Make sure that the power switch at the base or back of the TV is switched on The TV does not respond to remote control or front controls when switched on The TV requires some time to start up During this time the TV does not respond o the remote control or front controls This is normal behavior The standby light on the TV blinks red Disconnect the power cable from the power o
58. mail address please write in English to O pen Source Team Philips Intellectual Property amp Standards PO Box 220 5600 AE Eindhoven The N etherlands If you do not receive timely confirmation of your letter please send an email to the email address above The texts of the licences and acknowledgements for open source software used in this product are included on a separate leaflet Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals O ne of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today EN English Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products EMC regulation e In order to maintain conformity to the Electro Magnetic Compatib
59. mote Control OSRC To access the OSRC 1 While you view content from a connected device press iz OPTIONS 2 Select Show device keys then press OK 3 Select an onscreen button then press OK 4 Press D to exit Select speaker output If the connected device is HDMI Audio Return Channel HDMI ARC compliant you can output TV audio through an HDMI cable An additional audio cable is not required See Connect your TV gt About cables gt HDMI Page 43 Configure TV speakers 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select one of the following options then press OK e Off Switch off TV speakers e On Switch on TV speakers e EasyLink Stream TV audio through the connected HDMI CEC device Switch the TV audio to the connected HDMI CEC audio device through the adjust menu e EasyLink autostart Turn off TV speakers automatically and stream TV audio to the connected HDMI CEC audio device Select speaker output with Adjust menu If EasyLink or EasyLink autostart are selected access the adjust menu to switch the TV audio 1 While you watch TV press ttf ADJUST 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Stream TV audio through the TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed thr
60. n on connection If an EasyLink or HDMI Consumer Electronic Control HDMI CEC compliant device is connected to the TV it is automatically added to the Home menu when both devices are switched on To watch a connected device 1 Press fft 2 Select the newly added device icon EN 4 You can learn more on device connections in Connect your TV gt Connect devices HDMI Blu ray Disc Player I HOM High Definition TV For high definition HD picture quality watch HD programmes On standard definition SD programmes the picture quality is standard You can watch HD video content in these ways and more e a Blu ray disc player connected with an HDMI cable playing a Blu ray disc e anupscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air HD broadcaster DVB T MPEG4 e a digital HD receiver connected with an MI cable playing HD content from a cable or satellite operator e an HD channel on your DVB C network e an HD game console for example X Box 360 or PlayStation 3 connected with an HDMI cable playing an HD game HD video clip To experience the stunning sharpness and picture quality of HD TV watch the HD video clip from the Home menu Press ft gt Setup gt Watch demos Watch Demo is on the second page of the setup menu I g For more information about the availability of HD channels in your
61. nection to the nternet Browse PC or Net TV access is slow Refer to your router s user manual for information on transfer rate and other factors of signal quality You need a high speed Internet connection or your router Wireless network is distorted or not found ake sure that the wireless network is not disturbed by microwave ovens DECT phones or other neighbouring Wi Fi devices e f the wireless network is not working ry a wired network connection e For DLNA connection click on How does sharing change firewall settings in he Media Sharing window for the Help file 7 Product specifications Power and reception Power Reception Mains power AC 220 240 V 50 60 Hz Standby power lt 0 15 W Ambient temperature 5 to 40 degree Celsius For power consumption see the product specifications at www philips com support Antenna input 75 ohm coaxial IEC75 TV system DVB COFDM 2K 8 K Video playback NTSC PAL SECAM Digital TV MPEG 4 DVB T Terrestrial DVB T2 DVB C Cable DVB S S2 Satellite Tuner bands VHF UHF S Channel Hyperband Available on certain models only Display and sound Picture Display Display type LCD Full HD W UXGA Diagonal size 81 cm 32 inch 94 cm 37 inch 102 cm 40 inch 117 cm 46 inch 140 cm 55 inch Aspect ratio Widescreen 16 9 Panel resolution 1920 x 1080 p 100 Hz Pixel Plus HD picture e
62. ng or visually impaired To enable these features turn on universal access in the preference menu 1 Press fft 2 Select Setup gt TV settings gt Preferences 3 Select Universal access gt On then press OK EN 32 Visually impaired Tip To verify whether visually impaired audio is available press OPTIONS and select Audio language Languages with an eye icon support visually impaired audio To switch on visually impaired audio if available 1 While you watch TV press OPTIONS 2 Press the green button to select Visually impaired 3 Press one of the following buttons to select an option e Red Off Tum off visually impaired audio e Yellow Headphones Hear visually impaired audio from headphones only if applicable e Green Speakers Hear visually impaired audio from speakers only e Blue Speakers headphones Hear visually impaired audio from speakers and headphones 4 Press D to exit Note If the EasyLink remote control is enabled you cannot select the green or yellow buttons To disable seeUse more of your TV gt Use EasyLink gt Switch on Page 34 Adjust volume for the visually impaired 1 In the Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press D to exit Audio feedback for the visually impaired This feature enables audio feedba
63. nhancement 1080 p 24 25 30 50 60 Hz processing 100 Hz LCD Sound e Output power RMS 30 THD For 32 to 40 inch models 24 W For 46 to 55 inch models 28 W e Incredible Surround e Clear Sound e Dynamic Bass Enhancement e Mono Stereo NICAM Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080i 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz EN 59 English Multimedia Supported multimedia connections USB FAT or DOS formatted Mass Storage Class compliant with 500mA only SD card slot Supported audio video files Multimedia file names must not exceed 128 characters MPEG4 ASP 720x576p Ethernet UTP5 Supported image files JPEG jpg AACH M id ES E 3 7 3 c vester meid 3 s c Supported audio video files Multimedia file names must not exceed 128 characters ts mpg
64. nnection to the Internet 2 Switch on the router 3 Install the network See Connect the TV gt Computers and the Internet Page 52 Internet J LA Router Configure Net TV 1 Press fft select Browse Net TV and then press OK to confirm The terms and conditions of use are displayed 2 To agree to the terms and conditions press OK The registration menu is displayed 3 To register with Club Philips select Register then press OK 4 Confirm the onscreen message A prompt asks if you want to lock adult services 5 To lock adult services select Lock then press OK EN 22 6 Enter a 4 digit code then press OK 7 Re enter the 4 digit code then press OK The Net TV start page is displayed Access Net TV Applications Apps The first page shown is the Net TV home page The icons on this page represent the applications Apps e Browse Internet websites with the ntemet Apps Press the Navigation buttons to select an App then press OK to confirm e Read the Net TV quick guide for more information e Access the App Gallery to add more Apps to your home screen e You can change country settings and select Apps from other countries Access website 1 Select an Internet App then press OK 2 Use the Numeric buttons on the TV remote control to enter a web address Onscreen keyboard Select the area to enter the web address then press OK A keyboard appears
65. ns only your favourite channels 1 Press Q FIND 2 Select the channel and press z OPTIONS 3 Select Mark as favourite or Unmark as favourite then press OK Select a channels list 1 In the channel list press OPTIONS 2 Select Select list gt Favourites to display channels in the favourite list or All to display all channels 3 Press OK to confirm View programme guide The programme guide displays information about digital TV channels for example e _ Channel schedules e Synopsis of programmes Note TV programme guides are available in certain countries only Set programme guide Before you use the programme guide check the following settings 1 Press fft 2 Select Setup gt TV settings gt Preferences 3 Select Programme guide gt From the broadcaster then press OK Access the TV programme guide 1 Press fft 2 Select Programme guide then press OK Note If you are viewing the programme guide for the first time select Update Programme guide to update all available programmes EN 15 English Use TV programme guide options You can customise the displayed information to e Remind you when programmes start e Display only preferred channels 1 In the programme guide press OPTIONS 2 Select one of these settings then press OK e Setreminder Set programme reminders e Clear reminder Clear programme reminders e Change day
66. ns in other countries throughout the world All other registered and unregistered trademarks are the property of their respective owners D SDHC Logo is a trademark of SD 3C LLC Declaration of Conformity Hereby Philips Innovative A pplications N V declares that this television is in compliance with the essential requirements and other relevant provisions of D irective 1999 5 EC A copy of the Declaration of Conformity is available at http www philips com support Info for UK only Information about how to re tune your TV during the TV switchover Se Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When
67. ober 17 2007 The exact date you switch depends on the transmitter you are served by To check when you switch go to Digital UK s postcode checker on www digitaluk co uk Check your ITV news service or look at Teletext page 106 to see what TV region you re in Visit us at digitaluk co uk Call us on 0845 6 50 50 50t Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines EN n S a FO Shetland Islands STV Central 2010 11 Border 2008 og Tyne Tees 2012 Yorkshire Central Wales zo 2009 10 e i West Country 20100422 Q Contact information Belgi Belgique 0800 80 190 Gratis Gratuit Q CHAT Www philips com support Bparapua 00800 11 544 24 Cesk republika 800 142 840 Bezplatny hovor Danmark 3525 8759 Lokalt opkald Q CHAT www philips com support Deutschland 0800 000 7520 kostenfrei Q CHAT www philips com support EM 8a 0 0800 3122 1280 KArjon xwpis xp con Espana 900 800 655 Tel fono local gratuito solamente para clientes en Espa a Q CHAT www philips com support Estonia 8000100288 kohalik k ne tariifi France 0805 025 510 num ro sans frais Q CHAT www philips com support Hrvatska 0800 222778 free Ireland South 1 800 7445477 North 0 800 331 6015 Italia 800 088774 Numero Verde KasakcraH 7 727 250 66 17 local Latvia 80002794 local Lithuania
68. on screen message confirms that automatic switch off is disabled Adjust TV volume Increase or decrease the TV volume e Press on the remote control e Press lt I on the front of the TV Mute or unmute the TV volume e Press amp to mute the TV or e Press amp again to restore the volume Adjust headphone volume 1 Press ft gt TV settings gt Sound 2 Select Headphones volume then press OK Switch TV channels e PressI4 Bl on the remote control e Press CH on the TV e Press the Numeric buttons to enter a channel number View only analogue or digital TV channels You can use the channel list to access only analogue or digital channels 1 In the channel list press OPTIONS 2 Select Select list gt Analogue or Digital then press OK Depending on your selection only analogue or digital channels are available Listen to digital radio If digital radio channels are available they are installed automatically when you install the TV channels 1 While you watch TV press Q FIND The channel list is displayed 2 Press ize OPTIONS 3 Select Select list gt Radio then press OK 4 Select a radio channel then press OK Manage channel lists You can view all channels or only your favourite channels in the channel list While you watch TV press Q FIND The channel list is displayed Create a channel list You can create a channel list that contai
69. on the screen Use this to enter a web address Clear Net TV memory Warning This option resets Net TV completely You can clear the Net TV memory completely including your favourites the parental control code passwords cookies and history 1 Press fft 2 Select Setup gt Network settings 3 Select Clear Net TV memory then press OK Options Press OPTIONS to select the following e Remove App e Lock App e Unlock App e Move App Show remote control Keys such as play Pe rewind 44 and fast forward PP can be called up with Show remote control Press iz OPTIONS and select Show remote control Use the onscreen keys to operate the connected audio or video player Select a key and press OK to carry out its function Press gt to hide the onscreen keys Select P and P to scroll up and down on a web page Zoom page To zoom in and out on an Internet page press OPTIONS and select Zoom page Use the slider bar to set the enlargement To scroll through an Internet page use the Navigation buttons to jump from highlight to highlight Reload page If a page does not load correctly reload it Press ize OPTIONS and select Reload page Security info To view security information about a page press iz OPTIONS and select Security info Rent online video What you can do With this TV you can rent a video from an online video store 1 Open a video store You may need
70. onnections and cause arcing e ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e wo people are required to lift and carry a TV that weighs more than 25kg or 55lbs EN 6 e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount oninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different e Parts of this product may be made of glass Handle with care to avoid injury and damage
71. or previous channel 5 Power Switch the TV on or off standby 2 Play buttons Control video or music play 3 Colour buttons Select tasks or options Not supported in MHEG mode EN 11 English 4 ft Home Access the Home menu 5 AVP Navigation buttons Navigate through menus and select items 6 ICH CH P 1 Previous Next Switch channels navigate through menu pages tracks albums or folders 7 OK Confirm an entry or selection 8 D Back Return to the previous menu page or exit from a TV function SOURCE 11 ans 9 Q FIND Access the menu to select TV channel list 10 Ht ADJUST Access the menu to adjust settings 11 SOURCE Select connected devices 12 OPTIONS Access options for the current activity or selection SUBTITLE O TEXT ee INFO 13 Volume Adjust volume 14 amp Mute Mute or restore audio 15 0 9 Numeric buttons Select channels 16 TEXT INFO Enable or disable teletext Press and hold to view more information on the current activity The INFO button is available on certain models only 17 SUBTITLE Enable or disable subtitles EN 12 Batteries Warning Risk of swallowing batteries The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Caution The battery contains perchlorate material handle it with care For information see www d
72. ostatic discharge user intervention is required EN 52 What you need Warning This TV complies with the EMC directive only when you use a shielded Cat5 ethernet cable To connect your TV to computers the Internet or both you need An ethernet cable that is shorter than 3 metres A computer network that includes a A universal plug and play UPnP router and b A computer with one of these operating systems Microsoft Windows XP Microsoft Windows Vista Mac OSX or Linux To connect your TV to computers you also need media server software that is set to share files with your TV See Use your TV gt Browse PC through DLNA Page 19 To connect your TV to the Internet you also need a high speed connection to the Internet Note This DLNA1 5 network feature supports these computer operating systems Microsoft Windows XP or Vista Intel Mac OSX or Linux Connect Internet A Router 1 Switch on the router and switch on its DHCP setting 2 With the ethernet cable connect the router to the TV Alternatively you can also connect the router to the TV wirelessly through a wireless USB adaptor not included See Connect your TV gt Computers and the Internet gt Wireless LAN ready Page 53 3 Press fft select Setup gt Connect to network then press OK 4 Follow the onscreen instructions to install the network 5 Wait for the TV to find the network connection 6
73. ough the connected device e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode Maximize video display Some subtitles can create a separate subtitle bar under the video which limits the video display area After you switch on auto subtitle shift the subtitles display over the video image which maximizes the video display area Switch on auto subtitle shift 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Note Make sure that the picture format of the TV is set to Auto format or Movie expand 16 9 Retain picture quality If your TV picture quality is affected by the picture processing features of other devices switch on Pixel Plus Link To switch on Pixel Plus Link 1 Press fft 2 Select Setup gt TV settings gt EasyLink 3 Select Pixel Plus link gt On then press OK Hear another device at TV standby You can hear a connected HDMI CEC compliant device through the TV speakers even when the TV is in standby 1 Press ttt ADJUST to receive audio from the connected Philips EasyLink device If available audio only mode is enabled 2 Accept the prompt on the TV to tum off the
74. owse PC through DLNA Change settings In the Ambilight menu you can access more Ambilight settings 1 While you watch TV press ft gt Setup 2 Select TV settings gt Ambilight 3 Select a setting to adjust e Dynamic Adjust Ambilight between relaxed and dynamic levels Available only if Ambilight Colour is set to Dynamic e Brightness Adjust the brightness of Ambilight e Colour Select a predefined colour e _ Custom colour Set your own Ambilight colour To access this option set Ambilight gt Colour gt Custom e Separation Adjust the difference in colour levels on each side of the TV Turn off this feature for a dynamic and uniform Ambilight colour e TV switch off Select how Ambilight switches off when the TV is switched off What you can do If you have photos videos or music files stored on a computer connected through a home network you can play the files on your TV What you need e A wired or wireless home network connected with a Universal Plug and Play uPnP router e A Philips wireless USB adapter or a LAN cable that connects your TV to your home network e A media server such as PC running Windows Media Player 11 or higher or ac running Twonky Media Server ake sure that your computer firewall allows you to run the media server software program EN 19 English You will also need to set up the network connection
75. ply Media Information Changes to activate the changes EN 20 Enable sharing on Windows Media Player 12 1 Start Windows Media Player on your computer 2 In Windows Media Player select the Stream tab and then select Turn on media streaming The Media streaming options screen appears 3 Click Turn on media streaming Return to the Windows Media Player screen 4 Click Stream gt More streaming options e The Media streaming options screen appears e A media program appears in the local network screen If the media programme does not appear make sure that your PC firewall is not blocking the connection 5 Select the media programme and click Allowed e A green arrow appears next to the media programme e By default Windows Media Player shares files from these folders My Music My Pictures and My Videos 6 If your files are in other folders select Organize tab and select Manage libraries gt Music Follow the onscreen instructions to add the folders that contain your media files Enable sharing on Twonky Media 1 Visit www twonkymedia com to purchase the software or download a free 30 day trial to your Macintosh 2 Start Twonky Media on the Macintosh 3 In the Twonky Media Server screen select Basic Setup and First steps The First steps screen appears 4 Type a name for your media server and then dick Save changes 5 Back in the Twonky Media screen select Basic Setup gt Sh
76. r a few days from today maximum of 8 days away e To schedule a recording press ftt and select Programme guide At the programme guide page select the channel and programme you wish to record Press the right or left navigation buttons to shift the list You can enter the channel number to select the channel in the list e To change the date select the date at the top of the page and press OK Select the date you want and press OK You can set the schedule to record all future episodes of a programme or set the schedule to add 10 minutes of buffer at the end of the recording Highlight the programme press OPTIONS and select Record programme Select Schedule and press OK The programme is scheduled for recording A warning displays automatically when overlapping recordings are scheduled If you plan to record a programme during your absence remember to switch the TV to standby and keep the USB hard disk switched on Manage recordings List of recordings To view the list of recordings and scheduled recordings select the Recordings button above the programme guide list and press On this page with your recordings you can e select a recording to watch e remove recorded programmes e check the free disk space or e schedule a timed recording not linked to a specific TV programme Watch a recording To watch a recording select the arrow in front of the recording and press OK The playback o
77. re in the slideshow e Slideshow transition Set the transition from one picture to the next e _ Set as Scenea Set the selected picture as wallpaper on TV EN 18 Ambilight What you can do Available on certain models only Ambilight gives a more relaxed viewing experience It automatically adjusts the colour and brightness of the light to match the TV picture What you need e Forthe best Ambilight effect position the TV 25 cm away from the wall e Keep the remote control away from the TV as it can interfere with the infrared signals e Dim the light in the room Switch on 1 Press Ht ADJUST 2 Select Ambilight then press OK 3 To switch Ambilight on or off select On or Off You can also press AMBILIGHT on the TV to switch Ambilight on or off AMBILIGHT e Lounge light mood Select a lounge light mode The lounge light comes on when the TV is in standby e Scenea lounge light Switch Scenea lounge light on or off when Scenea is enabled e Wall colour Select the colour of the wall behind the TV Ambilight corrects its colours to suit the colour of the wall Use lounge light When the TV is in standby press Ambilight on the front of the TV to create a lounge light effect in your room Note It may take more than 5 seconds for the lounge light to switch on To select another lounge light colour see Use your TV gt Ambilight gt Setup Page 19 Br
78. s intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock N ever remove the TV cover Always contact Philips Customer Support for service or repairs CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Open source software Philips Electronics Singapore Pte Ltd hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please contact open source philips com If you prefer not to use email or if you do not receive a confirmation receipt within a week after mailing to this e
79. s done om The device has been added to the Home menu Blu ray or DVD disc player Connect the disc player with an HDMI cable to the TV b mi Blu ray Disc Player yr va YPbPr Audio L R Blu ray Disc Player ooo TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV SAT is available on certain models only Digital receiver Satelite receiver EN 45 English Connect the satellite or digital TV receiver with an HDMI cable to the TV b mi Digital receiver Satelite receiver Scart Digital receiver Satelite receiver Connect the satellite or digital TV receiver with a component cable Y Pb Pr and an audio L R cable to the TV et YPbPr Audio L R Digital receiver Satelite receiver EN 46 Recorder Connect the recorder with an antenna cable to the TV SAT is available on certain models only Connect the recorder with a SCART cable to the TV Recorder et YPbPr Audio L R Recorder EN 47 English Game console For the best gaming experience set the TV to game mode 1 Press Ht ADJUST 2 Select Smart picture gt Game then press OK 3 To exit press D The most practical connectors for a game console are on the side of the TV However you can also use the connectors at the back of the TV Connect the game console with an HDMI cable to the TV Qe vom Game console EN 48
80. sh Set TV wallpaper You can load another picture as the wallpaper Note Loading a new picture overrides the existing picture 1 Connect the USB storage device to the TV 2 Press fft 3 Select Browse USB then press OK 4 Select a picture then press OPTIONS 5 Select Set as Scenea then press OK 6 Select Yes then press OK 7 Press any button to exit Scenea Set Scenea lounge light When the TV is in standby you can switch on Ambilight and create a lounge light effect with your wallpaper Ambilight is available on certain models only When the TV is in standby press AMBILIGHT on the front of the TV Note It can take more than 5 seconds for the lounge light to switch on To select another colour for the lounge light see Use your TV gt Ambilight gt Setup Page 19 Set universal access Hearing impaired Tip To verify whether a hearing impaired audio language is available press OPTIONS and select Audio language Languages with an ear icon support hearing impaired audio To switch on hearing impaired audio and subtitles 1 While you watch TV press OPTIONS 2 Press one of the following buttons to select an option e Red Switch hearing impaired on or off e Green Switch on hearing impaired audio and subtitles 3 Press gt to exit Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are heari
81. st While you watch a live TV broadcast on a digital channel you can pause the broadcast and continue watching it later You can pause TV to answer an urgent phone call or have a break without having to wait for the TV commercials Meanwhile the broadcast is stored on the USB hard disk Note You can pause a broadcast for a maximum time span of 90 minutes e To pause a live TV broadcast press II pause A progress bar appears briefly on screen e To continue watching press play e To switch to live TV broadcast again press Il stop Once you switch to a digital channel the USB hard disk starts storing the broadcast The stored broadcast on the USB hard disk is cleared when e you switch the TV to standby e you switch to another channel The USB hard disk starts storing the content on the new channel broadcast e you start watching a programme from a connected device a Blu ray disc player or digital receiver While a programme is recording to the USB hard disk you cannot pause a live TV broadcast Instant replay While you watch a live TV broadcast from a digital channel you can replay the broadcast instantly To replay the last 10 seconds of a live TV broadcast press Ill pause and press the left navigation button on the remote control To jump back several steps of 10 seconds press the left navigation button repeatedly To jump back to the beginning of the TV broadcast press the left na
82. suitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press fft 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock Parental rating Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings lower than your child s age 1 Press fft 2 Select Setup gt Channel settings or Satellite settings 3 Select Child lock gt Parental rating A message prompts you to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks and timers gt Child lock Page 30 View subtitles Subtitle language You can change the subtitle language on some digital channels 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Subtitle language 3 Select Primary subtitles or Second
83. t Use Help You can access onscreen Help from the Home menu by pressing the Yellow button You can also switch between the Help menu and the TV menu by pressing the Yellow button Online support If you can t find what you need in the onscreen Help consult our online support at www philips com support Follow the website instructions to select your language then enter your product model number At our support website you can also e find answers to frequently asked questions e download a printable PDF version of his user manual to read e email us a specific question e chatonline with one of our support personnel available in certain countries only Contact Philips If you like you can contact Philips Consumer Care in your country for support You can find the contact number in the leaflet accompanying the TV Before you contact Philips note down your TV model and serial number You can find this information on the back of your TV or on its packaging EN 10 2 Use your TV Indicators Controls TV controls 1 Ambient sensor remote control sensor Ambient sensor is available on certain models only Remote control 1 lt J Increase or decrease volume 2 AMBILIGHT Switch Ambilight on or off Ambilight is available on certain models only 3 ft Home Access the Home menu Press again to launch an activity in the Home menu 4 CH Switch to the next
84. t one of the following options e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen teletext Dual screen splits the current channel or source to he left of the screen with teletext on he right e T OPP overview Table Of Pages T O P teletext broadcasts allow you o jump from one subject to another without using page numbers e Enlarge Normal view Zoom in on he page Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to display different character sets correctly 3 Press OPTIONS to exit Search 1 When you view teletext press OK to highlight the first word or number 2 Press the Navigation buttons to skip to the word or number to search 3 Press OK to begin the search 4 Press amp until no word or number is highlighted to exit the search Digital teletext Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels for example BBC1 When in digital teletext e Press the Navigation buttons to select or highlight items e Press the Colour buttons to select an option then press OK to confirm or activate Note
85. tify you if the channel list cannot be copied to the second TV Note If you are prompted to enter a code enter 8888 Copy channel list to USB 1 Connect a USB storage device to the TV with the channels installed on it 2 Press fft 3 Select Setup gt TV settings gt Preferences gt Channel list copy gt Copy to USB then press OK The channel list is copied to the USB storage device 4 Unplug the USB storage device Copy channel list to TV with no channels installed 1 Switch on the TV with no channels installed on it to start the initial installation Select the language and country The country setting must be the same as that of the TV whose channel list you want to copy Skip the search for channels EN 40 2 Connect the USB storage device containing the channel list to the TV 3 Press fft 4 Select Setup gt TV settings gt Preferences gt Channel list copy gt Copy to TV then press OK The channel list is copied to the TV 5 Unplug the USB storage device Copy channel list to TV with no channels installed 1 Switch on the TV on which you want to copy the channel list 2 Press fft 3 Select Setup gt Search for channels gt Reinstall channels then press OK You will be prompted to select the country where the TV was installed Make a note of the current setting and press gt followed by Cancel to exit 4 If the country setting on the TV is diff
86. tore your own picture settings vn EN 16 Change picture format Change the picture format to suit your preference 1 Press Ht ADJUST 2 Select Picture format then press OK 3 Select a picture format then press OK to confirm The available picture formats depend on the video source e Auto fill Adjust the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scale 4 3 format to 169 Not recommended for HD or RC e Wide screen Stretch 4 3 format to 169 e Unscaled Provide maximum detail for PC Only available when PC mode is enabled in the picture menu Watch a connected device Add new device Notes e _ Before you watch a connected device you must add its icon to the Home menu See Connect your TV gt Connect device Page 44 e If you connect an HDMI CEC compliant device to the TV through an HDMI connector and switch it on the device is automatically added to the Home menu 1 Connect and switch on the device 2 Press fft 3 Select Add your devices then press OK 4 Follow the onscreen instructions e Select your device e Select the connector
87. tsc ca gov hazardouswaste perchlorat e If your remote control signal is weak replace the batteries 1 Open the battery cover 2 Remove the old batteries from the battery compartment and replace them with fresh batteries Make sure that the ends of the batteries line up correctly with the markings in the battery compartment Notes Dispose of batteries according to environmental directives Read Get started gt Environmental efforts gt End of use Page 8 Remove batteries from the remote control if you will not use it for an extended period of time The type of battery varies according to RC model For remote control with AAA batteries end to end For remote control with AAA batteries side by side For remote control with coin cell batteries EasyLink controls Note EasyLink controls are available when the connected device is HDMI CEC compliant EasyLink allows you to control your TV and other HDMI CEC devices with one remote control Access EasyLink controls 1 While you view content from a connected HDMI CEC device press OPTIONS 2 Select Show device keys then press OK 3 Select the EasyLink control button then press OK Read more on EasyLink in Use more of your TV gt Use EasyLink Page 33 Smartphone control Use your iPhone as a secondary remote and even as a keyboard Go to the Apple Apps store and download the application Philips Wif
88. utlet Wait until the TV cools down before you reconnect the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature Enter 8888 E 56 The TV menu is in the wrong language Change the TV menu to your preferred language For more information see Set up your TV gt Menu language Page 40 When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance When the TV is in standby a startup splash screen is displayed then returns to standby mode This is normal behavior When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or press any key on the front ofthe TV TV channel Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected No digital channels were found during the installation e Make sure that the TV supports DVB T DVB C or DVB S in your country e Make sure that the antenna is properly connected and the correct network is selected Picture The TV is on but there is no picture or the picture is distorted e Make sure that the antenna
89. vigation button repeatedly until you reach the beginning of the broadcast storage or the maximum timespan Progress bar To display the progress bar while you watch TV press II pause With the progress bar on screen press 44 reverse or press PP forward to select from where you want to start viewing the stored broadcast Press these buttons repeatedly to change heir speed Start recording f your TV is connected to the Internet you can record a TV programme onto the USB hard disk Start and manage the recordings you make from the programme guide on the TV Press fft and select Programme guide If you find a TV Recording button on the programme guide page you can access the programme guide to start and manage recordings If the TV Recording button is not present check if the programme guide data is set to be updated through the network Select ftt gt Setup gt TV settings gt Preferences gt Programme guide gt From network Record now To record the programme you are watching press ftt and select Programme guide With the current TV programme highlighted press OPTIONS and select Record programme The USB hard disk starts recording and stops at the end of the programme To stop recording immediately access the Programme guide and press OPTIONS select Stop recording EN 27 English Record a programme You can schedule a recording of an upcoming programme for today o
90. y 4 Press the Navigation buttons to select a store then press OK to confirm The icon of the video store is added to the home page 5 To view a store select its icon and press OK Rent a video To rent a video select its icon on the video store page and press OK In most cases you can rent a video for one day or for a couple of days or even just 1 hour The way you select and rent a video varies from store to store EN 24 Payment The store prompts you to log in or to open a new account if you do not have one The login might consist of your email address and a personal PIN code When you are logged in you can select the payment method a credit card or a value code in most cases Consult the video store website for more information on its payment terms e To enter a number code PIN use the Numeric buttons on the remote control e To enter an email address select the text field on the page and press OK Select a character on the keyboard and press OK to enter Download the video When you have paid you can download the video on to the video memory During the download you can continue to watch a TV programme until the TV notifies you that the video is ready to play If you cancel a download you can still download the video until the rental period expires Watch video 1 Press fft select Browse Net TV The installed video stores are displayed 2 Select the video store where you rented

Download Pdf Manuals

Related Search

Related Contents

Samsung UN60JU710DFXZA Energy Guide  SMV 800 SmartLine MultiVariable Transmitter User`s Manual  DVD / CD Player ACM-5010 Manuale di istruzioni  その他用品  User`s Manual  Digitus DN-96010  Fisher-Price P0278 User's Manual  Thermaltake Chaser A71  Vigilances N°34 - Club des Vigilants  NFS2-3030 FR (DC-7070:G1)  

Copyright © All rights reserved. Failed to retrieve file