Strong SRT 7000
Contents
1. TIPS Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character 1 4 Accessories m 1 User Manual m 1 Remote control unit m 2x Batteries AAA type NOTE The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices It is recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications recording playback and other multimedia functions of the receiver would not work properly STRONG cannot guarantee compatibility to all types of USB storage devices It is advised not to store important information on USB storage devices used with the receiver Always make backups of data on your USB storage device before using it with this receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information Please ensure that either the USB device is already formatted to FAT FAT32 or format the USB device via your receiver refer to chapter 7 7 USB for details 2 0 YOUR RECEIVER 2 1 PIN code default 0000 2 2 Front pa2. STRONG PART 1 English DIGITAL TV Disable favourite TV or radio program Repeat the step 1 described above and select Disable in the Favourite Type window View favourite program In normal viewing mode no menu mode press the FAVOURITE to display a list of favourite programs Press FAVOURITE again to toggle between available favourite lists 2 Select your favourite program and press to switch to it 3 Now viewing mode by pressing Wyou can select channels from the chosen favourite group only If you want to change to the main channel list just press OK in viewing mode Delete a TV or radio program 1 Select the program you want to delete and press the BLUE button A message will appear Press OK to delete the program or EXIT to cancel 2 Repeatthe previous step to delete more programs Skip TV or radio program 1 Select the program you would like to skip and press the GREEN button 2 The program will be marked to skip The receiver will skip this program while zapping between programs in normal viewing mode in channel list mode the skipped channels remain selectable 3 Repeat the previous step to skip more programs 4 To confirm and exit the menu press EXIT Disable a skipped TV or Radio program Press the GREEN button on the program marked with the skip symbol Move a TV or radio program 1 Select the preferred program then press the RED button A move symbol will appear 2 Press AV to
3. TV or VCR is not connected to main Bad cable connection Check mains lead Firmly plug in cables between receiver and TV Audio muting Press the MUTE button TV power off Turn TV on Scrambled channel message No response to remote control Channel is scrambled Receiver off Select alternative channel Plug in and turn on plug Handset not aimed correctly Aim handset at IR sensor IR sensor obstructed Check for obstructions Hand set batteries exhausted Replace handset batteries Password forgotten Contact local Service Hotline or send email to our Support via The external USB HDD does not start Power consumption is too high Connect an extra power supply adapter to your USB HDD device Record not performed The USB storage device is not connected Make sure a storage device is connected There is no free space on the storage device Delete some data from the storage device and try again The USB storage device format is not supported Make sure your USB storage device is formatted in FAT or FAT32 file system Refer to 7 7 4 Recording Configure gt Format The receiver switches to STBY automatically Auto Standby function is activated and reached the adjusted time default 3h In the menu System gt Auto Standby you can adjust the Auto Power Down time or disable it 20 www strong tv PART
4. 1 English STRONG DIGITAL TV 9 0 SPECIFICATIONS Demodulator Demodulation QPSK 8PSK Input symbol rate DVB S QPSK 1 45 Ms s DVB S2 8PSK QPSK 10 30 Ms s FEC decoder Auto 1 2 2 3 3 4 5 6 7 8 in DVB S mode 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 in DVB S2 mode 3 5 2 3 3 4 5 6 8 9 9 10 in 8PSK mode Video Decoder Profile level MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Input rate Max 20 Mbit s Aspect ratio 4 3 and 16 9 Pan amp Scan Letterbox Auto Frame Rate 24 Hz 25 Hz 30 Hz 1080i 50 Hz 60 Hz 720p 480p 480i 60 Hz 5761 576 50 Hz Video resolution 576i 576p 720p 1080i Audio Decoder Audio decoding MPEG 1 Layer 1 amp 2 AC3 Downmix Audio mode Mono L R Stereo AC3 Sampling rate 32 44 1 48 kHz Tuner Typel F Type IEC169 24 Female Input frequency range 950 2150 MHz RF impedance 75 Ohm unbalanced Signal level 65 to 25 dBm LNB power 13 18 V DC 596 max 0 5 A overload protected DiSEqC versions 1 0 1 1 1 2 GOTO X Tone burst System amp Memory Main processor MSTAR7828 Flash memory 8 MBytes System memory 128 MBytes Multimedia Video playback supported in various formats MPG MPEG TS VOB MP4 AVI Audio playback MP3 WMA formats Picture view JPG BMP formats STRONG cannot guarantee the playback of video files although extensions are listed here as it depends on codec used data bit rate and resolution Connectors SAT IN SAT OUT HDMI V A Ou
5. Connecting multiple fixed LNB s using a DiSEqC 1 0 switch Fig 8 1 Connect the LNB s of your fixed antenna to the inputs of a DiSEqC 1 0 switch 2 Connect the output or to receiver connector of the DiSEqC 1 0 switch to the SAT IN connector on your receiver 3 Referto section 3 1 or 3 2 for TV and mains connections www strong tv 5 STRONG PART 1 English DIGITAL TV 4 0 FIRST TIME INSTALLATION After all connections have been made properly switch on TV and make sure the receiver is connected to the main power Then switch on the receiver If you are using the receiver for the first time or restored to factory default the First Installation menu will appear on your TV screen Use lt P buttons to select the OSD Language of your preference and press OK to confirm An Info page will be displayed Read the guide info and press the INFO button to proceed to the next Installation step You can open and close the info page again by using the INFO button NOTE If German is confirmed as language German preset channels from ASTRA 19 2E will be installed You can continue with the Installation menu to scan and install further channels like described below or quit it by double pressing the EXIT button and enjoy the pre installed channels 4 1 Installation Satellite Selection use A V to highlight the satellite your dish is aimed at When using a multi feed antenna with more than 1 LNB select the satellites your antenna is ad
6. Rename files To Delete a recording s select the desired file s by pressing the YELLOW button pressing again removes the delete mark and confirm with OK In the appeared message confirm the deletion with OK or press EXIT to cancel It is possible to delete files in other folders or even whole folders as well To Rename a recording you only can rename files which were recorded with the receiver Select the desired file and press GREEN button In the appeared key table select a character by using the navigation buttons Press OK to choose the character Once you finish inputting the new name navigate to OK button on screen and press OK on the remote control to store the new name The file extension rec should not be reentered as it will be added automatically STRONG cannot guarantee the playback of video files although extensions are listed here as the correct playback depends on codec used data bit rate and resolution as well Please consult the STRONG Hotline in your country to get more details 18 www strong tv PART 1 English STRONG DIGITAL TV 7 7 2 Photo Configure Slide Time You can adjust slide show interval to 1 8 seconds Slide Mode You can select one of the 60 slide show effects or Random mixed effects Aspect Ratio Keep displays the picture as its original aspect Discard displays the picture in full screen mode 7 7 3 Movie Subtitle This subtitle function is only relevant in Movie menu fo
7. cable The receiver requires a mains voltage of 100 240V AC 50 60Hz auto selecting Please check the local power conditions before connecting the receiver to the mains supply Fig 3 Turns the receiver ON Standby Starts recording of the current broadcast to the connected storage device Displays a list of records available on the connected storage device To turn the sound on or off Viewing mode Displays the EPG Electronic Program Guide Press once to display channel number name and now next info Press twice to display detailed event info and transponder signal strength information Pressing again back to viewing mode To open teletext if available on current channel Displays the audio selection menu with selections for available languages and audio modes Switches to VCR input if it is in DTV state Switches to DTV if it is in VCR state To select subtitles language out of available ones on current channel To open the main menu in viewing mode or to go one step back in the menu Go back one step in the menu cancellation of current process exit from main menu to viewing mode Increasing decreasing of the volume level in viewing mode navigating through the menus changing values of settings in a menu Switches to the next previous channel in viewing mode or moving the highlight up down in the menu Viewing mode Displays the channel list MENU activation of the highlighted item To access your favourite channels Toggles between available
8. favourite groups Toggles between TV and Radio mode Channel number and numeric value input To switch between the last viewed channels In TV mode shows the list of installed satellites for selecting their channel lists In playback timeshift mode opens the time banner for selection the moment where to jump Searches backwards during playback Each pressing increase the speed x2 x32 Searches forwards during playback Each pressing increase the speed 2 x32 Jumps to the previous file during playback Jumps to the next file during playback www strong tv PART 1 English STRONG DIGITAL TV 25 gt PLAY Starts resumes the playback 26 PAUSE Starts resumes timeshift when USB device is connected Freezes resumes the playback of Multimedia files 27 WM STOP Stops playback timeshift record 28 REPEAT Selects different repeat modes during playback 29 RED Flexible functions in OSD MENU and Teletext 30 GREEN In viewing mode changes resolution of HDMI output between 10801 720p 576p and 576i flexible functions in OSD MENU and Teletext 31 YELLOW In viewing mode changes aspect ratio and aspect conversion of Video outputs flexible functions in OSD MENU and Teletext 32 BLUE In viewing mode displays Schedule menu for easy setup timers flexible functions in OSD MENU and Teletext 2 5 Installing the Batteries Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartm
9. lt gt 7RONG Digital High Definition Satellite Receiver SRT 7000 DIGITAL TV STRONG User Manual www strong tv STRONG ON M FF Fig 1 Model SRT 7000 Digital HD Satel cei bur sa iN ih ant Fig 2 12 3 5 PVR r STANDBY pec 1 LIST MUTE 3 5 1 O INFO TIX aii LA 7 je A DTV VCR ww SUBTITLE 12 est On pal m EB 2 n 23 21 AC a t 2 m STOP REPEAT 25 29 1 e322 STRONG Fig 3 TELEVISION SCART gs Model SRT 7000 Digital HD Satellit COAXIAL R SATOUT SATIN S PDIF AUDIO Fig 6 TELEVISION Model SRT 7000 Digital HD Satellite COAXIAL R SATOUT SATIN S PDIF__ AUDIO Fig 7 COAXI AMN S PDIF AUDIO Fig 8 PART 1 English TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 YOUR RECEIVER 2 1 PIN code default 0000 2 2 Front panel 2 3 Rear panel 2 4 Remote Control 2 5 Installing the Batteries 2 6 Using the Remote Control 3 0 CONNECTIONS 3 1 Basic connection using a Scart cable 3 2 Basic connection using an HDMI cable 3 3 Connecting multiple fixed LNB s using a DiSEqC 1 0 switch 4 0 FIRST TIME INSTALLATION 4 1 Installation 5 0 QUICK GUIDE TO USIN
10. now be displayed Use to select the desired stream and confirm with OK With the lt P buttons you could select using of Left Right lt P speakers www strong tv 7 STRONG PART 1 English DIGITAL TV 6 4 Teletext Your receiver includes a fully featured Teletext To access Teletext press the TTX button in viewing mode and use the 0 9 or A V buttons to select the number of the page you wish to see Subpages once loaded and if available can be selected with the lt P buttons The coloured buttons of the remote control allow you to jump to selected pages directly as indicated on the bottom of the teletext screen Press TTX again or EXIT to go back to viewing mode 6 5 Subtitles Some programs support a choice of different DVB subtitle languages Press the SUBTITLE button in viewing mode to display a list of available subtitle languages Use to select the desired subtitle and confirm with OK 6 6 Changing the Aspect Ratio format To change the Aspect Ratio format while watching TV simply press the YELLOW button in viewing mode Each pressing will switch to the next format Please refer to section 7 2 for more details 6 7 Changing the Resolution format To change the Resolution format while watching TV simply press the GREEN button in viewing mode Each pressing will switch to the next format Please refer to section 7 2 for more details 6 8 EPG Electronic Program Guide The Electronic Programme Guide is a
11. or Numeric buttons but also the fast channel Find option Red button It allows you to enter the right channel number just by selecting the first letters of the channel s name in the new opened table Once you set all parameters press OK to store your booking Edit Press GREEN button to edit an existing booking Delete Press BLUE button to delete a booking from the list Press OK to confirm deleting or EXIT to cancel it If you have scheduled recordings make sure to have an external storage device connected to the receiver Check periodically if free space is available on the storage device for future recordings NOTE You can set Timers for Programs directly from EPG Please refer to section 6 8 for more details 14 www strong tv PART 1 English STRONG DIGITAL TV 7 5 Option Press MENU and select Option In this menu you can adjust the OSD Language Subtitle Language Audio Language Digital Audio mode and Banner Time Select an option and press lt P to adjust the setting Press EXIT to exit the menu OSD Language Select the preferred language of On Screen Display Subtitle Language Select the preferred subtitle language Audio Language Select the preferred audio language for watching TV channels If the language is not available the default program language will be used Digital Audio Select digital audio output mode relevant only if an audio amplifier is connected to the S PDIF
12. photos playback EXIT to get back to the Multimedia menu Press EXIT once more if want to leave the Multimedia menu Playback of Movie and Records In the Movie menu you have to navigate to a movie file In the Records menu you have to select the folder MYRECORD where recordings are stored You can directly access recordings out of TV mode just by pressing the LIST button Select the file and press OK to start the playback in preview mode Use the RED button to switch between preview and full screen Use RECALL to go to the up folder During playback you can use the playback control buttons such as PAUSE II PLAY f STOP B REV 44 FWD PP PREV M4 and NEXT You can check the file details by pressing the INFO button in full screen mode For closing banner use INFO again or press EXIT Use the GOTO button to enter with the 0 9 buttons the desired time moment you want to jump to and press OK to confirm With the lt lt and buttons you can review or forward the playback with x2 x4 x8 x16 and x32 speed If reviewing reaches the beginning it will resume the playback of the current file and if forwarding reaches the end the playback of the next file will start With the M4 and buttons you can jump to the previous next video file In the Movie mode not in Records is also possible to use the REPEAT button its functionality is explained in Music section above Additionally in the Records Menu you can Delete or
13. very useful function that allows you to watch programme schedules and information on screen and to mark programs for recording Press the EPG button to activate this guide You can enter EPG via Menu too Use A V to select the desired channel and RED to move the highlight to the program list In the program list use AW to select or scroll through programs and to display program information for the next previous days Use BLUE to display detailed information about the selected program If there is more than one page of information use lt P to scroll NOTE Availability of EPG data depends on broadcast Booking a program from EPG Select a program as described above Once the desired program is selected press OK This will lead you to the Timer Schedule menu All details are already filled in for you Make a choice between View and Record mode and save the timer with OK To display the list of booked events just press the BLUE button being in the channel list part of EPG or in viewing mode Please refer to section 7 4 1 for more details 6 9 Favourite channels Use the FAVOURITE button to access your favourite channels and to toggle between available favourite groups Please refer to section 7 1 1 for details how to create favourite lists 6 10 Changing between DTV VCR contents Switching between DTV VCR contents in operation mode is realized by using the DTV VCR button AV IN will be displayed on the front LED when receiver i
14. G YOUR RECEIVER 6 0 OPERATION 6 1 Changing channels 6 2 Info Banner 6 3 Selection of audio language 6 4 Teletext 6 5 Subtitles 6 6 Changing the Aspect Ratio format 6 7 Changing the Resolution format 6 8 EPG Electronic Program Guide 6 9 Favourite channels 6 10 Changing between DTV VCR contents 6 11 Instant Recording STRONG DIGITAL TV iO OO OO NNNNA Ul Ui PWWWW NNNN 6 12 Time Shift 7 0 MAIN MENU 7 1 Program 9 7 2 Picture 11 7 3 Channel Search 12 7 4 Time and Date Settings 14 7 5 Option 15 7 6 System Settings 15 7 7 USB 17 8 0 TROUBLESHOOTING 20 9 0 SPECIFICATIONS 21 STRONG declares that this item complies with the basic requirements and other relevant regulations of E 01 80 5 01 49 91 directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC ation Hi oS 0820 400 150 STRONG 2010 Al reserved 10 2010 EH 0826 029 92 g 0 14 Min from French wired line www strong tv 1 STRONG PART 1 English DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or any other equipment that generates heat to rain or intense moisture to intense vi
15. abetical order A Z By Frequency Sort the channels in frequency order Low High By Encrypt Sort the channels from free to scrambled 7 2 Picture Press MENU then select Picture The menu provides options to adjust the video settings Press V to select an option and lt P to adjust the setting Press EXIT to exit the menu Aspect Ratio The default and recommended format is Auto You can also set the display format to further available options like 4 3 Full Screen 4 3 Pan amp Scan 4 3 Letter Box and 16 9 Wide Screen 4 3 Letter Box the full 16 9 picture will be displayed on your 4 3 TV set with black bars above and below the picture 4 3 Pan amp Scan the centre of the 16 9 picture will be displayed full screen on your 4 3 TV 4 3 Full Screen combination of Letter box and Pan amp Scan 16 9 Wide Screen select when use a 16 9 TV set You can change the video output format directly from viewing mode by pressing the YELLOW button on the remote control Resolution If the video does not appear correctly change the setting These settings match the most common settings for HDMI 480i for NTSC system TV 480p for NTSC system TV 576i for PAL system TV 576p for PAL system TV 720p for NTSC or PAL system TV 10801 for NTSC PAL system TV TIP You can change the video resolution directly from viewing mode by pressing the GREEN button on the remote control TV Format Set the standard corresponding t
16. ansponder In new opened menu enter the new transponder s data by using Navigation and Numeric buttons Confirm changes with OK or cancel by EXIT Delete transponder Press YELLOW to delete the focused transponder Press OK to confirm deleting or EXIT to cancel it www strong tv 13 STRONG PART 1 English DIGITAL TV 7 3 2 DB Management save your channel settings on an USB Storage Device and load it anytime back This menu allows you to up download the channel Data Base of your receiver from to an USB Device This very convenient feature enables you to save your personal settings like Channel Favourite Sat and TP lists on an USB Storage Device and upload them later back to the receiver This could be done e g after unintentional changes or Factory Reset In such a case just skip the whole First Installation and new adjusting procedures by pressing EXIT in First Installation and select the DB management menu Connect the USB Storage Device to you receiver and select one of the options 7 3 2 1 Load from USB Press OK for displaying the list with available DB files if any stored before The DB files STRONG 52 Database are shown with their built date Day and Month Select the DB file you want to download and confirm it with OK If DB is successfully downloaded message appears on screen receiver will switch automatically to the first stored channel and show its content in the background Press EXIT unt
17. booked time so that the records can be full finished But in case of Instant Recording REC button the Auto Standby function has priority 16 www strong tv PART 1 English STRONG DIGITAL TV 7 7 USB Press MENU and select USB The menu provides Multimedia feature to playback Music Photo Movie and with the receiver Recorded files Supported are different file formats listed below In this menu you also can see information about the total and free space of the connected USB device make video and photo configurations and format the USB device into the receiver accepted format The unit supports USB devices with FAT and FAT32 format Make sure your USB device is appropriate formatted refer to point 7 7 4 Recording Configure for more details NOTE STRONG cannot guarantee compatibility operation and or bus power with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit With large amounts of data it may take longer for the system to read the contents of a USB device Some USB devices may not be properly recognized Even when they are in a supported format some files may not play or display depending on the content 7 7 1 Multimedia If there is no USB device plugged in a warning message No USB Device is Found will be displayed When an USB device is detected you can select between Music Photo Movie or Records in this menu Select one of them
18. bration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electrical shock Do not touch a power cord with wet hands It may cause an electric shock When the receiver is not used for a long period of time you should unplug the power cord from the wall socket Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m Never open the receiver cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards and your warranty will be void Refer all maintenance or servicing to suitably qualified personnel When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m It is a necessity that you only use an approved extension and compatible wiring that is suitable
19. el and OK to confirm All channels beginning with the chosen letter s will now be displayed Close the alphabet banner with EXIT and select the desired channel in the filtered list The following keys are available in the channel list and viewing mode RED Opens an alphabet banner for fast finding the desired channel TV RADIO Toggles between TV and radio channels GOTO opens the Satellite List for satellite selection In viewing mode FAVOURITE to switch to one of the available favourite lists 6 1 3 Using the A V keys A will switch to a higher channel V will switch a lower channel 6 1 4 Using the RECALL key Use RECALL button for switching between last viewed channels Please refer to section 7 6 for more details 6 2 Info Banner At any time during viewing mode you can press the INFO button to get info about the current channel and now and next program Press INFO twice to see the detailed info of now and next program and the technical details about the current channel Press INFO again or EXIT to close the information You can change the duration of info banner displaying in the Option menu Please refer to section 7 5 for more details Program information is displayed when available Availability depends from broadcast 6 3 Selection of audio language Some channels support a choice of different audio formats and or languages To select another audio stream press AUDIO in viewing mode A list with available audio streams will
20. ent The diagram inside the battery compartment shows the correct way to install the batteries 1 Open the cover 2 Install batteries 3 Close the cover Fig 4 NOTE The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 6 Using the Remote Control Fig 5 To use the remote control point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver in an appropriate angle The remote control will not operate if its path is blocked NOTE Sunlight or very bright light will decrease the sensitivity of the remote control 3 0 CONNECTIONS 3 1 Basic connection using a Scart cable Fig 6 1 Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs 2 Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and the other end to the SCART input of your TV 3 Plug the power cord to a suitable wall outlet 3 2 Basic connection using an HDMI cable Fig 7 1 Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs 2 Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to the HDMI input of your TV 3 Plug the power cord to a suitable wall outlet 3 3
21. for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children For transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below Refer to the user manual of your TV and your antenna Make sure that the SCART HDMI cable and outdoor components are in a good condition and the SCART HDMI connections are well shielded and from good quality 2 www strong tv PART 1 English STRONG DIGITAL TV This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates warning information
22. from our website support page or contact your local dealer Unzip file if necessary and copy it to root folder of your USB storage device Connect USB storage device to the USB port of the receiver Press MENU and select Software Update By USB Press OK to enter the software file list Select the file with software image and press OK to initiate the software update An attention banner will now be displayed Press OK to start the update or EXIT to cancel it Follow the instructions displayed on screen Update process will take some time Once update is completed the receiver will display message Software Upgrade Complete Please Restart Unplug the receiver from the mains and plug it in again Your updated receiver will start with the last shown channel A WARNING NEVER power off the receiver or remove the USB device during the software update process Doing so might cause irreparable damage to your receiver and will void your warranty Auto Standby Auto Standby is a new power saving feature that helps you with reducing power consumption It will switch off the receiver when no command is given for the defined period of time It s set per default to 180 Minutes With the lt P buttons you can select between different time intervals or Off for disabling the feature In the 0000 Mode you can enter the desired Auto Standby time by using the 0 9 buttons 9 NOTE If there are Timers running the Auto Standby function will be disabled for the
23. glish STRONG DIGITAL TV After configuring press OK or BLUE again to start scanning with the selected settings Your receiver will now perform an automatic channel search with scan progress shown on screen During channel search you can skip Transponders by pressing MENU button or quit the scan process by EXIT Once the process is finished all found channels will be stored and the receiver will switch to the first found channel Multi Satellites Scan When using a multi feed antenna with more than 1 LNB select the satellites your antenna is adjusted for by OK button The selected satellites will be marked by the symbol v Set in the DiSEqC point the appropriate LNB numbers and press BLUE for Scan A window with scanning settings will be displayed After configuring the settings like explained in Single Satellite Scan above press OK or BLUE again to start Multi Scan on all selected satellites Scanning by transponder Manual Scan Press GOTO for displaying the transponder list of the focused satellite By pressing GOTO again you switch back to the satellites list Single Transponder Scan Use A V buttons to highlight the transponder your wish to scan Press BLUE for Scan A window with scanning settings will be displayed After configuring the settings explained in 7 3 1 3 above press OK or BLUE again to start scanning on focused transponder Once the scan process is finished all found channels will be stored and the receiver wi
24. he front panel Choose the desired channel with the buttons Alternatively you can digit the channel number with the 0 9 buttons on the remote control Or press OK in viewing mode to display the channel list The volume can be adjusted with the lt P buttons 6 www strong tv PART 1 English STRONG DIGITAL TV 6 0 OPERATION In viewing mode several features are available to make watching TV a true pleasure This paragraph describes these features Please also read chapter 7 0 to get familiar with the menu of your new receiver 6 1 Changing channels Your new receiver is equipped with different ways to change channels m via direct access m via the channel list m via the AWkeys m via the RECALL key 6 1 1 Direct access To gain direct access to a certain channel simply input its number with the 0 9 key s on the remote control Channel numbers can be up to four digits long Entering a number with less than four digits is possible Just wait a few seconds and your receiver will switch to the selected channel 6 1 2 Channel list Press OK in viewing mode to display the channel list Use A V to highlight your channel of choice and press OK once to select the highlighted channel The channel list is equipped with a Find function to make finding the desired channels easier While in the channel list press RED An alphabet banner will now be displayed Use A V to select the first letter or letters of the desired chann
25. il OSD menu disappears 7 3 2 2 Backup to USB Press OK to make a backup of the data base A DBM File STRONG S2 Database shown with the actual Date Day and Month will be created on the USB Device If DB is successfully uploaded a message saying this will be displayed on screen Press EXIT until OSD menu disappears 7 4 Time and Date Settings Press MENU and select Time The menu provides options to adjust the time and date settings and allows you to setup scheduled recordings of programs in Timer submenu Press AY to select an option and lt P to adjust the setting Press EXIT to exit the menu Time Auto Select On for automatically time and date update from live signal or Off for manual entering them Time Zone Select the Time Zone Offset Summer Time Select On or Off depending on the year s period Date Enter the Date when Time Auto is set to Off Time Enter the Time when Time Auto is set to Off 7 4 1 Timer Schedule In this menu you can setup the schedule for automatic recording or switching to the defined channels at a particular date time Timer menu can be direct entered out from viewing mode just by pressing the BLUE button Add Press RED button to add a new booking In the appearing dialog select the desired channel type and number the starting date and time end time repeat cycle once daily or weekly and mode view or record Tip For selecting the number of desired channel you can use the lt P
26. justed for by OK button and set the appropriate LNB s in the DiSEqC point The scan process will be done then on all selected satellites Signal Adjust the signal quality bar on the bottom of the screen allows you to fine tune the alignment of your antenna for optimum reception Adjust your antenna for maximum possible signal quality Once the signal cannot be improved anymore fix the dish on this position and press the BLUE button for Scan Scan Mode use AV 4 to highlight the desired options and press OK to start the Channel Search Default settings are recommended Channel Search your receiver will now perform an automatic channel search Once the process is finished all found channels will be stored and the receiver will switch to the first found channel You are now ready to enjoy your new receiver NOTE If no channels were found during the automatic channel scan the receiver will return to the First Installation menu Please select your language again and refer to chapter 7 3 for further instructions 5 0 QUICK GUIDE TO USING YOUR RECEIVER We at STRONG understand that you can t wait to enjoy your new HD receiver The following quick guide will make you familiar with the basic operation of this device We do however advice you to read the full manual to get the best performance from your STRONG HD receiver To turn your receiver ON or to Standby use the STANDBY button on the remote control or the button on the left side of t
27. ll switch to the first found channel Multi Transponder Scan Select the transponders you want to scan by OK button The selected transponders will be marked by the symbol Press BLUE for Scan A window with scanning settings will be displayed After configuring the settings like explained in 7 3 1 2 above press OK or BLUE again to start Multi Scan on all selected transponders 7 3 1 4 Satellite Edit options Add satellites Press RED to add a new satellite In new opened menu enter the satellite s name and position by using Navigation and Numeric buttons In the appeared key table select a character by using the navigation buttons Press OK to choose the character Once you finish inputting the new name navigate to OK button on screen and press OK on the remote control to confirm the new name Save the settings with OK or cancel by EXIT Edit satellites Press GREEN to edit the focused satellite For changing settings see explanation above Confirm changes with OK or cancel by EXIT Delete satellite Press YELLOW to delete the focused satellite Press OK to confirm deleting or EXIT to cancel it 7 3 1 5 Transponder Edit options Add transponder Press RED to add a new transponder In new opened menu enter the transponder s data by using Navigation and Numeric buttons Confirm the settings with OK or cancel by EXIT An existing TP cannot be stored again under the same satellite Edit transponder Press GREEN to edit the focused tr
28. move the program 3 Press OK or RED again to confirm the new position 4 Repeat the above steps to move more channels Lock a TV or radio program You can lock selected programs for restricted view 1 Select the preferred program then press the YELLOW button The program is now marked as locked 2 Repeat the previous step to select more programs 3 To confirm and exit the menu press EXIT To view the locked program you need to enter either the default password 0000 or your last set password We recommend changing of the default password to anyone of your preference Please refer to chapter 7 6 System for more details Disable a locked TV or Radio program Press the YELLOW button on the program marked with the lock symbol Rename a TV or radio program 1 Select the program you want to rename and press the INFO button A key table appears 2 Inthe appeared key table select a character by using the navigation buttons Press OK to choose the character Once you finish inputting the new name navigate to OK button on screen and press OK on the remote control to confirm the new name 3 To store the changes and exit the menu press EXIT 7 1 2 EPG Electronic Program Guide Please refer to section 6 8 above 10 www strong tv PART 1 English STRONG DIGITAL TV 7 1 3 Sort Here you can sort your channels in the following orders Default Sort the channels in the original order By Service Name Sort the channels in alph
29. nel Fig 1 1 Power button To turn ON OFF the main power supply 2 Remote control sensor Receives the signal from the remote control 3 LED display Shows channel number in operation and time in Standby 4 Standby indicator Shows power state of the receiver green LED receiver is turned on red LED receiver is in standby mode 5 USB To connect external storage devices 6 Channelup down To change channels without using the remote control 2 3 Rear panel Fig 2 1 SAT OUT To loop through the satellite signal to a second receiver 2 SATIN To connect to the LNB of your satellite dish for reception of satellite broadcast signal 3 S PDIF To connect to a digital or home cinema audio amplifier www strong tv 3 STRONG PART 1 English Gers E DIGITAL TV VIDEO RCA AUDIO L R TV SCART VCR SCART HDMI Power cord 2 4 Remote Control Qi RW 4 10 10 12 13 14 15 16 17 18 19 20 21 22 23 24 STANDBY REC LIST MUTE EPG INFO TTX AUDIO DTV VCR SUBTITLE MENU EXIT 4 AY OK FAVOURITE TV RADIO 0 9 RECALL GOTO 44 REV b gt FWD M4 PREV PM NEXT To connect to the RCA video input of your TV or VCR using an RCA cable To connect to the audio input of your HIFI or television To connect to TV using a SCART cable To connect to a Video or DVD recorder To connect to the HDMI input of your TV using a good quality HDMI
30. o your TV set Available options are Auto PAL and NTSC Video Output This setting is only relevant when the receiver is connected to the TV set via Scart Select RGB for the best picture quality or CVBS in case your TV doesn t support RGB Loop Through VCR to TV Scart This option is only relevant if you have a device Video DVD recorder connected to the VCR scart connector of your receiver It s signal will be looped through to the TV scart output of your receiver Use this option to set the preferred loop through mode Running mode The Loop through will be switched off when the receiver is in Standby mode Always The Loop through is always on in Operation and in Standby mode Switching between DTV VCR contents in Operation mode is realized by using the DTV VCR button on the remote control AV IN will be displayed on the front LED when receiver is in VCR mode Press DTV VCR button again to return to the digital TV content 9 NOTE Setting Always increases the power consumption in Standby mode The front panel LED remains green in Standby www strong tv n STRONG PART 1 English DIGITAL TV 7 3 Channel Search To access the menu press MENU and select Channel Search It contains two options Installation and DB Data Base Management Select an option and press OK to enter it Press EXIT to exit the menu 7 3 1 Installation 7 3 1 1 Satellite Selection Use A V buttons to highlight the satellite your di
31. output PCM audio from any format will be converted to PCM format RAW audio from receiver will be send in original format OFF digital audio output disabled Banner Time Set the duration of info banner displaying Possible settings are 1 10 seconds 7 6 System Settings Press MENU and select System The menu provides options to adjust the system settings Press V to select an option and press lt P to adjust the setting Press EXIT to exit the menu SET PASSWORD Set or change the password for locked programs and menu access Enter your old password or the default password 0000 You will then be asked to enter your new password To confirm re enter your new password Once it is confirmed press EXIT to exit the menu Restore Factory Default Reset your Set Top Box to the Default Factory Settings In Main Menu select Restore Factory Default and press OK or to select Enter your password or the default password 0000 and press OK to confirm This option will delete all your channels and settings The receiver will reboot and start with First Installation menu A WARNING factory reset will permanently delete all your personal settings timers and stored channels Please consider this before you perform a factory reset Information It shows model software and hardware information Recall List Enable or disable Recall list function which supports multi recall channel switching If the status is set ON then by
32. pecially when Time Shift is activated at channels with high data rate High quality SD HD STRONG cannot guarantee an accurate Playback of the Time Shift file 7 0 MAIN MENU 7 1 Program Press MENU and select Program using lt P buttons Press OK or button to enter the Program submenu Press OK or gt button to edit program settings Press EXIT to exit the menu 7 1 1 Program Edit To edit your program preferences lock skip favourite move or delete please go to Program Edit menu This menu requires a password to access Enter your password or use the default password 0000 if you did not change it Use A 4 to highlight a channel TV RADIO to toggle between TV and radio channel lists and GOTO to select the desired satellite if more than one available Set favourite program Your receiver allows you to store channels in up to 4 favourite lists Due to the large number of channels available on satellite nowadays this can be a very useful function 1 Highlight the preferred program then press the FAVOURITE button A Favourite Type window will pop up on screen The following 4 groups are available Movie News Sport and Music Please select one or more of them A heart shaped symbol will appear and the program is marked as a favourite Press EXIT to return to the channel list for further selection 2 Repeat the previous step to select more favourite programs 3 To confirm and exit the menu press EXIT www strong tv 9
33. press OK to enter the file browser and select the file you wish to be played Music supported file formats are MP3 and WMA Photo supported file formats are JPG and BMP Movie supported video files in various formats MPG MPEG TS VOB MP4 AVI Records displays list of recordings Music Select the desired music file and press OK to start playback During playback the following functions are available PLAY gt or OK starts playback of the selected file Il to pause resume playback and to stop it and to review or forward the playback with 2 x4 x8 x16 and x32 speed If reviewing reaches the beginning it will resume the playback of the current file and if forwarding reaches the end the playback of the next file will start opens a counter banner for entering the desired time moment you want to jump to Use the 0 9 buttons for entering the time and OK to confirm I and starts playback of the previous next file REPEAT Press once for single file repeat twice to repeat all files or triple for random playing The symbol for selected repeat mode will appear at the top of the screen Press once again to return to common play mode RECALL goes to the up folder EXIT to get back to the Multimedia menu Press EXIT once more if want to leave the Multimedia menu TIP Playback of music will continue as long as the Multimedia menu is active This allows you to listen to mu
34. pressing RECALL button a list of all previous selected channels will be displayed for new selection If the status is set OFF then by pressing RECALL button receiver will switch to the previous selected channel www strong tv 15 STRONG PART 1 English DIGITAL TV Software update In Main Menu select Software Update and press OK or to select There are two software update options available SW update By OTA The OTA Over the Air function allows you to search for software updates available on satellite Please ask your local STRONG dealer or visit our website fittp www strong ty for according information In the OTA menu all necessary STRONG OTA settings Satellite Frequency Symbol rate and Polarization are already set per default but could also be changed manually Press OK to initiate the update process An attention banner will now be displayed Press OK to start the update or EXIT to cancel it Follow the instructions displayed on screen The software searching and update process could take up to 20 minutes depending on the data volume in stream After process is finished also if no Update was found receiver will reboot and start with the last shown channel A WARNING NEVER power off the receiver or pull the mains plug during the software upgrade process Doing so might cause irreparable damage to your receiver and will void your warranty SW update by USB Download the required update file for your receiver model
35. r movies which contains subtitle files in srt or txt format In the Records menu the subtitles if available get displayed in their original format which cannot be changed During playback press SUBTITLE to select the desired language and confirm with OK While playing Records files you also can press TTX to select teletext subtitle from the appropriate page if available During playback of Movie files you can press SUBTITLE twice to change the below described subtitle settings Subtitle Specific Select the subtitle size in between Small Normal or Big Subtitle BG Select the subtitle background in between White Transparent Gray or Yellow Green Subtitle Font Color Select the subtitle font color in between Red Blue Green White or Black 7 7 4 Recording Configure Record Device If you have multiple partitions on your storage device select one of them as default partition for recording Here you also can see information about the format and the total and free memory space of the Partition Device Format A WARNING Format function will delete all records data and information from your USB device or selected partition STRONG will not take any responsibility for damaged or lost data on the USB device If you have multiple partitions on your storage device select the partition you would like to format and press OK to continue An attention banner will now be displayed Press OK to start formatting or EXIT to cancel i
36. s in VCR mode Press DTV VCR button again to return to the digital TV content Please refer to Loop Through point in section 7 2 for more details 6 11 Instant Recording To perform a recording you have to insert USB storage device into USB port of the receiver Select a channel you would like to record and press REC button The recording will start and at the left upper corner of the screen you will see recording notification with blinking RED dot and record duration During recording you can change to channels from same transponder only Only these available channels will be displayed in the channel list Once switching to a channel different as the recorded one the number of the recorded channel will be displayed in the recording banner at the left upper corner of the screen In the channel list the recorded channel will be marked by a record symbol You can check details of the recording in progress by pressing the INFO button 8 www strong tv PART 1 English STRONG DIGITAL TV To stop a recording press STOP button on remote control Another way of doing recordings is to use the Timer please refer to 7 4 1 Timer of this manual Average record size values are approximately depend from bit rate of actual broadcast MPEG2 SD channel 1 hour take about 2 2 GB space MPEG4 SD channel 1 hour take about 1 GB space MPEG4 HD channel 1 hour take about 4 5 GB space Accessing to the recordings You can access recordings by pre
37. sh is aimed at Its antenna settings will be shown at the right side You can enter the right side with lt P buttons and return to the satellite list with EXIT 7 3 1 2 Configure the antenna settings for selected satellite LNB Type Press lt P or OK to show the list of LNB Types which is shown as frequencies of local oscillator You also can enter frequency by User Single User Dual at bottom of the list Default is set a Universal LNB 09750 10600 the most used on the market LNB Power Press lt P to set the LNB power 13 18V is the setting for a Universal LNB 22 kHz Press lt P to switch on or off the 22KHz oscillator signal Auto is the setting for a Universal LNB Toneburst to enable or disable the toneburst switcher if available DiSEqC1 0 to select the right port from up to 4 if available for the right LNB DiSEqC1 1 to select the right port from up to 16 if available for the right LNB Motor if using a motor press lt P to select between DiSEqC1 2 or GOTOX depending of motor type Then Press OK to show the menu to set position or GREEN for location DiSEqC1 2 Move the motor to the right position for locking the signal like explained below Move Continue Press lt P for moving West East It will keep moving as long as the button is hold pressed Once pressing will move in 1 step Move Step 1 Press lt P for moving West East in 0 3 step Store Position to store the current motor position for selected satelli
38. sic while watching photos Just exit of the Music submenu and select desired slide mode in the Photo submenu like explained below www strong tv 17 STRONG PART 1 English DIGITAL TV Photo Your receiver allows you to watch a slide show with all photo s available in the chosen folder To use the slide show choose a folder with photo files Press PLAY P to start and STOP W or EXIT to stop the slide show See the different Photo Configure options explained in point 7 7 2 below In the Photo mode there are following functions available OK opens selected photo in full screen format PLAY starts slide show to pause resume slide show E or EXIT to close full screen format or to stop slide show and return to the folder view INFO to open close the photo details banner while in full screen or slide show mode RED to zoom the displayed photo use A 4 to navigate to the desired part of the zoomed picture GREEN to turn the photo counterclockwise YELLOW to turn the photo clockwise GOTO opens a Grid view to go back press EXIT RECALL goes to the up folder M4 and opens the previous next photo REPEAT functionality is explained in Music section above When you enter the Photo menu while listening to the music then the music playback will be automatically switched to repeat all mode You can now enjoy your pictures while listening to the music and use in slide show mode all the REPEAT functions for
39. ssing the LIST button on the remote control The list of recordings can also be accessed through Menu USB Multimedia Records Please refer to 7 7 1 Multimedia for details of available functions 6 12 Time Shift The Time Shift function allows you to pause live broadcasts and resume normal watching without missing anything Make sure there is a compatible USB device connected and there is enough free space on it Press to freeze the current broadcast Press IM again to start time shifted playback You can check the Time Shift duration banner and further details by pressing the INFO button For closing banners use INFO again or press EXIT Use GOTO button to enter the desired time moment you want to jump to To stop Time Shift press and confirm with OK or press EXIT to cancel During Time Shift you can use the 4 and buttons to review or forward the playback with x2 x4 x8 x16 and x32 speed If reviewing reaches the beginning it will resume to time shifted playing and if forwarding reaches the end it will change to record mode You can re start the Time Shift during recording as well Just switch to the recorded channel and proceed like explained above NOTE The Time Shift will only work correctly when a fast USB storage device such as an USB 2 0 HDD is connected to the receiver Distorted picture and or audio during Time Shift indicate a low USB device speed STRONG cannot guarantee for USB devices used Es
40. t Format procedure will take some time depends from size of storage device used At the end of process Formatting is complete message will appear Press EXIT to exit the menu www strong tv 19 STRONG PART 1 English DIGITAL TV 8 0 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver Please check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact your local Serviceline or STRONG dealer Alternatively you can send a support mail via our website www strong tv NEVER open or disassemble your receiver This may cause a dangerous situation and will void the warranty PROBLEM POSSIBLE CAUSE WHAT TO DO Stand by indicator does not light up Mains lead unplugged multipoint connector switched off Check mains lead switch multipoint connector on Front panel switch is in Set front panel switch to ON position OFF position No picture The receiver can t receive Check the antenna cable replace the cable or the signal connect the cable to the receiver tightly Incorrect values of some tuner parameters Wrong direction of the dish Set the values of tuner parameters correctly in menu Installation Check the signal strength with a spectrum analyzer and adjust your dish correctly No picture or sound on TV Input is not selected on your TV Switch to correct TV input
41. te Goto Reference to go to the reference 0 position GOTO X Set your location coordinates Main German locations are preinstalled Press lt P to select If Manual selected use lt P UP DOWN and NUMERIC buttons to enter the right position By pressing OK position gets stored and the motor moves automatically towards selected satellite Set Limit for DiSEqC1 2 and GOTO X options For Move Continue Move Step 1 and Goto Reference please see explanation above Set West Limit to store the current motor position as West limit Set East Limit to store the current motor position as East limit Disable Limit to disable West and East limits 7 3 1 3 Channel Scan Automatic Scan Single Satellite Scan Press BLUE for Scan A window with scanning settings will be displayed Scan Mode Press lt P to select Default Blind Scan or NetWork Default All in the memory stored transponders will be scanned Blind Scan Slow scan in 2 MHz step It first scans the whole frequency band to get the transponders which can be locked After gathering all transponders it scans the transponders one by one to get the programs NetWork Network search will be performed when a Network information is broadcasted new switched transponders will be found and stored Crypted Press lt P to select All Channels scrambled and or FTA Channels free to air Service Type Press lt P to select ALL DTV or Radio 12 www strong tv PART 1 En
42. tput Type A Version 1 0 TV SCART RGB CVBS Audio L R output with volume control VCR SCART CVBS Audio L R RCA outputs Audio L R and CVBS video S PDIF Dolby Digital Out Coaxial USB 2 0 Type A Connector www strong tv 21 STRONG PART 1 English DIGITAL TV General Data Input voltage range Power consumption Power consumption in standby Operating temperature Storage temperature Operating humidity range Size W x D x H in mm Weight 100 240 V AC 50 60 Hz max 18 W typ 8 5 W without external storage device max 1 W without external storage device 0 40 C 10 50 C 10 85 RH Non condensing 220 x 170 x 45 0 68 kg 22 www strong tv 11 Oct 2010 18 49
Download Pdf Manuals
Related Search