Home

Hitachi CPX9

Contents

1. me Y Oo 00 Speakers L R i R L R Y Cs PB CR PR HDMI S VIDEO OUT AUDIO OUT VIDEOOUT AUDIO OUT AUDIO OUT COMPONENT VIDEO OUT Y Y wit h n as pa E amplifier VCR DVD Blu ray Disc player AWARNING b Do not disassemble or modify the projector and accessories gt Be careful not to damage the cables and do not use damaged cables AGAUTION D Turn off all devices and unplug their power cords prior to connecting them to projector Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector gt Use appropriate accessory or designated cables Ask your dealer about non accessory cables which may be required a specific length or a ferrite core by the regulations For cables with a core only at one end connect the end with the core to the projector gt Make sure that devices are connected to the correct ports An incorrect connection may result in malfunction or damage to the device and the projector NOTICE gt Use the cables with straight plugs not L shaped ones as the input ports of the projector are recessed 10 Connecting your devices continued NOTE Be sure to read the manuals
2. INPUT button ENTER button MENU button Cursor buttons OO OS MENU button Cursor buttons l ESC button RESET button 1 To start the MENU press the MENU button The MENU you last used EASY or ADVANCED will appear EASY MENU has priority to appear just after powered on 2 In the EASY MENU z EASY MENU SELECT 1 Use the A V cursor buttons to select an item to TOET operate If you want to change it to the ADVANCED on Vei MENU select the ADVANCED MENU gt FLTER TME m 2 Use the lt gt cursor buttons to operate the item m ADVANCED MENS COMPUTER EXIT 1024 x 768 60Hz In the ADVANCED MENU 1 Use the A cursor buttons to select a menu Ea S BRIGHTNESS 0 If you want to change it to the EASY MENU sulu Z ONMA DEFAULT select the EASY MENU Aseen E amp OPTION SHARPNESS 4 The items in the menu appear on the right side HSA 2 Press the cursor button or ENTER button to pa move the cursor to the right side Then use the A V cursor buttons to select an item to operate and press the P cursor button or ENTER button to progress The operation menu or dialog of the selected item will appear 3 Use the buttons as instructed in the OSD to operate the item ADVANCED MENU 5 SELECT w BRIGHTNESS 0 COMPUTER IN 1024 x 768 60Hz continued on next page 24 Using the menu function continued 3 To close the MENU press the MENU button again or select EXIT and press
3. e When the zoom adjustment is set to the TELE telephoto focus this function may be excessive This function should be used when the zoom adjustment is set to the full WIDE wide angle focus whenever possible e When the projector is placed on the level about 4 the automatic keystone distortion correction may not work e When the projector is inclined to near 30 degree or over this function may not work well e This function will be unavailable when Transition Detector is on EN55 21 Using the magnify feature MAGNIFY ON OFF button 1 Press the MAGNIFY ON button on the remote control The picture will be magnified and the MAGNIFY dialog will appear on the screen When the MAGNIFY ON button is pressed for the first time after the projector is turned on the picture will be zoomed by 1 5 times On the dialog triangle marks to show each direction will be displayed 2 While the triangles are displayed on the dialog use the A Y 4 P cursor buttons to shift the magnifying area 3 A magnifying glass icon will be displayed on the dialog when the MAGNIFY ON button is pressed while the dialog with the triangles is displayed 4 While the magnifying glass icon is displayed on the dialog use the A Y cursor buttons to adjust the magnification ratio The magnification ratio will be adjusted with fine steps And changes in the ratio in single steps are subtle so they may be hard to recognize 5 Press the MAGNIFY OFF but
4. v This projector has a variety of I O ports that supposedly cover for any business scene The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen v This projector realizes the large projection image even if in a small space v The new double layer filter system is expected to function longer and offers you less maintenance frequency v This compact lightweight projector uses a front exhaust system that keeps the user comfortable by directing hot air away from the user Checking the contents of package Please see the Contents of package section in the User s Manual concise which is a book Require of your dealer immediately if any items are missing NOTE Keep the original packing materials for future reshipment Be sure to use the original packing materials when moving the projector Use special caution for the lens Part mames Projector 1 Lamp cover L458 The lamp unit is inside 2 Focus ring E219 3 Zoom ring 19 4 Control panel 5 5 Elevator buttons x 2 E119 6 Elevator feet x 2 L419 7 8 9 10 SS KR KS NN SESS SSS AN S RSS SS y f Remote sensor 13 Lens 162 Intake vents Filter cover L460 The air filter and intake vent are inside Speaker L440 Exhaust vent AC IN AC inlet 101112 Rear panel E15 Security bar 2112 Security slot 412 11 12 13 1
5. 2 OPTION Y SECURITY 3 EASY MENU EXIT COMPUTER IN 1024 x 768 60Hz ltem Deseription O VOLUME SPEAKER AUDIO SOURCE HDMI AUDIO 40 Using the lt gt buttons adjusts the volume Low lt gt High Using the A V buttons turns on off the built in speaker ON amp OFF When OFF is selected the built in soeaker does not work While the image signal from the input port chosen in step 1 is projected the audio signal from the input port selected in step 2 is output to both the AUDIO OUT port and built in speaker of this projector However the built in soeaker does not work when SPEAKER is set to OFF 1 Choose a picture input port using the A V buttons Choose AUDIO OUT STANDBY to select the sound output in the standby mode 2 Select one of the AUDIO IN ports using lt gt buttons Select X to mute the sound from the input port or in the standby mode chosen in the step 1 e In the AUDIO SOURCE window H symbolizes the audio signal from the HDMI port It can be selected only for the picture input from the HDMI port e C C Closed Caption is automatically activated when X is selected and an input signal containing C C is received This function is available only when the signal is NTSC for VIDEO or S VIDEO or 480i 60 for COMPUTER IN and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu 146 e AUDIO OUT STANDBY is automatically set to OFF when SAVING is selected for t
6. 1 Holding the projector pull the elevator knobs up to loose the elevator feet Position the front side of the projector to the desired height Release the elevator knobs in order to lock the elevator feet After making sure that the elevator feet are locked put the projector down gently If necessary the elevator feet can be manually twisted to make more precise adjustments Hold the projector when twisting the feet 5 To loose an elevator foot pull up the elevator knob on the same side as it MN To finely adjust twist the foot Adjusting the zoom and focus Zoom ring Focus ring 1 Use the zoom ring to adjust the screen size SN SS SSS SSS SSS ii 2 Use the focus ring to focus the picture SS RRS RS RS KS SNN NA lt WS Using the automatic adjustment feature Press AUTO button on the remote control Pressing this button performs the following O For a computer signal The vertical position the horizontal position and the horizontal phase will be automatically adjusted Make sure that the application window is set to its maximum size prior to attempting to use this feature A dark picture may still be incorrectly adjusted Use a bright picture when adjusting O For a video signal and s video signal The video format best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item
7. Large It reduces picture e This item can be selected only for a video s video and component OVER SCAN video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals continued on next page 31 ltem Deseription O Using the lt gt buttons adjusts the vertical position Down lt gt Up e Over adjusting the vertical position may cause noise to appear on the screen If this occurs please reset the vertical position to the V POSITION default setting Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN E131 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the HDMI port Using the lt gt buttons adjusts the horizontal position Right lt gt Left e Over adjusting the horizontal position may cause noise to appear on the screen If this occurs please reset the horizontal position to the H POSITION default setting Pressing the RESET button when the H POSITION is selected will reset the H POSITION to the default setting e When this function is performed on a video signa
8. if the bulb bursts it is possible for shards of glass to fly into the lamp housing and for gas containing mercury and dust containing fine particles of glass to escape from the projector s vent holes gt About disposal of a lamp This product contains a mercury lamp do not put itin a trash Dispose of it in accordance with environmental laws e For lamp recycling go to www lamprecycle org in the US e For product disposal consult your local government agency or www eiae org in the US or www epsc ca in Canada For more information call your dealer e If the lamp should break it will make a loud bang when it does unplug the power cord from the outlet and make sure to request a replacement lamp from your local dealer Note that shards of glass could damage the projector s internals or cause injury during handling so please do not try to clean the projector or replace the lamp yourself Disconnect If the lamp should break it will make a loud bang when it does ventilate the the plug room well and make sure not to inhale the gas or fine particles that come out from the from the projector s vent holes and not to get them into your eyes or mouth power Before replacing the lamp turn the projector off and unplug the power outlet cord then wait at least 45 minutes for the lamp to cool sufficiently Handling the lamp while hot can cause burns as well as damaging the lamp e Never unscrew except the appointed marked by an arr
9. Deseription O Use the buttons to select 2 COMPUTER IN the computer input signal type AUTO SYNC ONG COMPUTER IN O AUTO gt SYNC ON G OFF e Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port To input component video signal to the projector an RCA to D sub cable or adapter is required e In the AUTO mode the picture may be distorted with certain input signals In such a case remove the signal connector so that no signal is received and select the SYNC ON G OFF and then reconnect the signal COMPUTER IN Set the frame lock function on off for each port 1 Use the A Y buttons to select the input ports COMPUTER IN lt gt HDMI CGS 2 Use the buttons to turn the PS FRAME LOCK frame lock function on off i ON amp OFF e This item can be performed only on a signal with a vertical frequency of 50 to 60 Hz e When ON is selected moving pictures are displayed more smoothly continued on next page 36 len Description O O The resolution for the COMPUTER IN input signals can be set on this projector 1 In the INPUT menu select the RESOLUTION using the A V buttons and press the gt button OE The RESOLUTION menu will be displayed i STANDARD 1024x768 2 In the RESOLUTION menu select the Aklais ora sig A il to display using STANDARD 1960 168 the 1366 x Selecting AUTO will set a resolution DEUSTO AMMO RBE M 4
10. ENTER or INPUT button To revert to the previous name without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button continued on next page 44 ltem Deseription O Using the A Y buttons switches the mode for the template screen Press the gt button to display the selected template and press the lt button to close the displayed screen The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed E249 TEST PATTERN lt gt DOT LINE1 lt gt DOT LINE2 lt gt DOT LINE3 2 2 MAP2 lt gt MAP1 lt CIRCLE2 lt gt CIRCLE1 lt gt DOT LINE4 TEMPLATE You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected To invert or scroll the map display the guidance by pressing the RESET button on the remote control three seconds or more when MAP1 or MAP2 appears While the guidance is displayed e Press the A cursor button and then press the ENTER or INPUT button to place the Northern Hemisphere on the top e Press the Y cursor button and then press the ENTER or INPUT button to place the Southern Hemisphere on the top e Press the lt gt cursor button and then press the ENTER or INPUT button to scroll the map horizontally continued on next page 45 ltem Deseription O The C C is the function that displays a a c c transcript or dialog of the audio portion of ais is a video fi
11. OUT below is invalid and no signal is output from the MONITOR OUT port The AUDIO OUT STANDBY of the AUDIO SOURCE E140 is invalid and no signal is output from the AUDIO OUT ports 15 ECO MODE While the image signal from the input port chosen in step 1 is projected the image signal from the input port selected in step 2 is output to MONITOR OUT port 1 Choose a picture input port using 8 MONITOR OUT A V buttons COMPUTER IN eats i Choose STANDBY to select the S VIDEO picture output in the standby mode A S J I 2 Select the output signal from the MONITOR OUT port using lt gt MONITOR OUT buttons Select OFF to disable the MONITOR OUT port for the input port or standby mode chosen in the step 1 e If you have changed the setting of STANDBY it applies only to the current standby mode NORMAL or SAVING selected under STANDBY MODE without changing the setting of the other mode The factory settings are as follows COMPUTER IN for the NORMAL mode of STANDBY MODE OFF for the SAVING mode of STANDBY MODE 39 AUDIO menu From the AUDIO menu items shown in the table below can be performed Select an item using the A V cursor buttons and press the cursor button or the ENTER button to execute the item Then perform it according to the following table ADVANCED MENU 2 SELECT Y PICTURE IMAGE 3 INPUT 4 SETUP D lt a VOLUME 1d SPEAKER a AUDIO SOURCE HDMI AUDIO SCREEN
12. RETURN appropriate to the input signal 3 Pressing the P or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions clock phase and STANDARD horizontal size l Y COMPUTER IN The INPUT_INFORMATION dialog will be displayed 4 To set a custom resolution use the A V buttons to select RESOLUTION the CUSTOM and the RESOLUTION_CUSTOM box will be displayed Set the horizontal HORZ and a vertical VERT resolutions using a RESOLUTION _ CUSTOM the A V gt buttons HORZ VERT This function may not support all A resolutions 5 Move the cursor to OK on screen and press the P or ENTER button The message ARE YOU SURE YOU WISH TO CHANGE RESOLUTION appears To save the setting press the gt button The horizontal and vertical positions clock phase and horizontal size will be automatically adjusted The INPUT_INFORMATION dialog will be displayed 6 To revert back to the previous resolution without saving changes move the cursor to CANCEL on screen and press the lt or ENTER button The screen will then return to the RESOLUTION menu displaying the previous resolution e For some pictures this function may not work well 37 SEMUR men ADVANCED MENU 2 SELECT below can be performed 4 AUTOECO MODE OFF A ES Select an item using the A V cursor buttons and AUDIO MRROR NORMAL SCREEN 25 STANDBY MODE SAVING press
13. button Each time you press the button the projector switches its input port from the current port as below COMPUTER IN gt HDMI VIDEO S VIDEO e While ON is selected for AUTO SEARCH item in OPTION menu 147 the projector will keep checking the ports in above order repeatedly till an input signal is detected MUTE button continued on next page 16 Selecting an input signal continued 1 Press COMPUTER button on the remote control to COMPUTER button select the COMPUTER IN port 1 Press VIDEO button on the remote control Each time you press the button the projector switches its input port from the current port as below ES HDMI gt S VIDEO gt VIDEO 7 e While ON is selected for AUTO SEARCH item in OPTION menu the projector will keep checking every port sequentially till an input signal is detected 147 If VIDEO button is pressed when COMPUTER IN port is selected the projector will check HDMI port first 1 Press the MY SOURCE DOC CAMERA button on MY SOURCE the remote control The input signal will be changed DOC CAMERA button into the signal you set as MY SOURCE 449 e This function also can use for document camera Select the input port that connected the document camera 17 Searching an input signal SEARCH button 1 Press SEARCH button on the remote control The projector will start to check its input ports as below in order to find any input signals When an inpu
14. buttons on the projector except the STANDBY ON button are locked ON amp OFF e Please use this function to prevent tampering or accidental operation This function does not have any effect on the remote control INFORMATION Selecting this item displays a dialog titled INPUT_INFORMATION It shows the information about the current input INPUT _INFORMATION INPUT _INFORMATION COMPUTER IN S VIDEO SERVICE FRAME LOCK AUTO co nti n ued 4 RETURN EXIT CO RETURN EXIT e The FRAME LOCK message on the dialog means the frame lock function is working e This item can t be selected for no signal and sync out e When the MY TEXT DISPLAY is set to ON the MY TEXT is displayed together with the input information in the INPUT _ INFORMATION box 457 FACTORY RESET Selecting OK using the P button performs this function By this function all the items in all of menus will collectively return to the initial setting Note that the LAMP TIME FILTER TIME LANGUAGE FILTER MESSAGE SECURITY settings and others are not reset CANCEL gt OK D1 S E C Y R Wy Menu ADVANCED MENU S SELECT Y PICTURE ENTER PASSWORD This projector is equipped with security functions SNT From the SECURITY menu items shown in the table ree below can be performed Fit To use SECURITY menu User registration is reguired Mans before using the security functions jega Enter the SECU RITY menu COMPUTER IN 1024 x 768 60Hz 1 Use
15. cursor buttons E124 23 ENTER button 124 24 ESC button M24 25 RESET button 124 26 Battery cover E113 Back of the remote control setti g Up Install the projector according to the environment and manner the projector will be used in Arrangement Refer to the illustrations and tables below to determine screen size and projection distance The values shown in the table are calculated for a full size screen 1024 x 768 a Screen size diagonal b Projection distance 10 from the projector s end ED ED Screen height 10 On a horizontal surface Suspended from the ceiling e Keep a space of 30 cm or more between the N sides of the projector and other objects such pea as walls e For the case of installation in a special state such as ceiling mount the specified mounting accessories Q70 and service may be required Before installing the projector consult your dealer about your installation lt CPX7 gt 16 9 screen S creen size diagonal ko distance Projection distance max max m inch cm inch cm inch m inch m inch cm inch cm inch 42 0 9 34 1 1 42 36 14 1 0 12 4614 57 49 t9 1 0 15 591148 71 61 241 1 1 asf eal ee rs a a Tr 24 83 26 101 5 s 2 11 29 115 97 38 2 1 107 3 3 130 109 43 3 1 19 3 7 145 122 48 3 1 da
16. e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu G53 Using the A V buttons turns on off the message function ON amp OFF When the ON is selected the following message function works AUTO IN PROGRESS while automatically adjusting NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ NOT AVAILABLE Searching while searching for the input MESSAGE Detecting while an input signal is detected AUTO ECO MODE while starting up with AUTO ECO MODE The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of FREEZE and Il while freezing the screen by pressing the FREEZE button The indication of the TEMPLATE displayed by changing e When the OFF is selected please remember if the picture is frozen Do not mistake freezing for a malfunction E123 continued on next page 43 ltem Deseription O Each input port for this projector can have a name applied to it 1 Use the A buttons on the SCREEN menu to select SOURCE NAME and press the P or ENTER button The SOURCE NAME menu will be displayed 2 Use the A Y buttons on the SOURCE TE NAME menu to select the port to be named and press the P button The SOURCE NAME dialog
17. from the power outlet and allow the projector to cool down at least 10 minutes then turn the power on again Either there is no lamp and or lamp cover or either of these has not been properly fixed Please turn the power off and disconnect the power plug from the power outlet and allow the projector to cool down at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again Signal source does not correctly work Correctly set up the signal source device by referring to the manual of the source device The BLANK function for pictures and the MUTE function for sounds are working AV MUTE may be active Refer to the item Sound does not come out and No pictures are displayed on the next page to turn off the MUTE and BLANK functions Continued on next page 66 Phenomena that may be easy to be mistaken for machine defects continued f Reference Phenomenon Cases not involving a machine defect The signal cables are not correctly connected Correctly connect the audio cables The MUTE function is working Restore the sound pressing the MUTE or VOLUME button on the remote control The volume is adjusted to an extremely low level Sound does not Adjust the volume to a higher level using the menu function come out or the remote control The AUDIO SOURCE SPEAKER setting is not
18. menu 2 Turning off the MY TEXT PASSWORD 2 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 2 2 Select OFF to display the ENTER presto z PASSWORD box large Enter the Sos registered password and the screen will Inquiring Code 01 2345 6789 return to the MY TEXT PASSWORD on off ou menu ENTER PASSWORD box If an incorrect password is input the menu will large close If necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit inquiring code will be displayed inside the box 3 3 Contact your dealer with the 10 digit inquiring code Your password will be sent after your user registration information is confirmed E MY TEXT PASSWORD ON RETURN EXIT continued on next page 56 ltem Deseription O 1 Use the A buttons on the SECURITY menu to MY TEXT DISPLAY select the MY TEXT DISPLAY and press the ON button to display the MY TEXT DISPLAY on off emu d menu 2 Use the A Y buttons on the MY TEXT DISPLAY on off menu to select on or off COMPUTER IN MY TEXT ON bd OFF NO INPUT IS DETECTED DISPLAY When itis set ON the MY TEXT will be displayed nidos on the START UP screen and the INPUT _ INFORMATION when the INFORMATION on the SERVICE menu is chosen O NEUT INFORMATION COMPUTER IN e This fun
19. mode TV lt FILM lt gt OFF t i e This function works only for a video signal s video signal component video signal of 480i 60 or 576i 50 and an HDMI PROGRESSIVE signal of 480i 60 or 5761050 When TV or FILM is selected the screen image will be sharp FILM adapts to the 2 3 Pull Down conversion system But these may cause a certain defect for example jagged line of the picture for a quick moving object In such a case please select OFF even though the screen image may lose sharpness Using the A V buttons switches the noise reduction mode HIGH lt gt MID lt gt LOW G VIDEO NR e This function works only for a video signal s video signal component video signal of 480i 60 or 576i 50 and an HDMI signal of 4801060 or 576i 50 Using the A V buttons switches the mode for color space AUTO lt RGB lt gt SMPTE240 lt gt REC709 lt gt REC601 i ieee COLOR SPACE This item can be selected only for a computer signal or a component video signal e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well at some signals In such a case it might be good to select a suitable mode except AUTO continued on next page 34 ltem Deseription O The video format for S VIDEO port and VIDEO port can be set 1 Use the A V buttons to 2 VIDEO FORMAT E select the input port AUTO NTSC PAL SECAM NTSC MPAL NPAL S VIDEO O O 0 0 O
20. pase 1 4 Move the cursor to the right side of the NEW ener PASSWORD AGAIN box and press the gt gt TRANSITION DETECTOR button to display the NOTE NEW PASSWORD NOTE NEW PASSWORD box for about 30 seconds please make note 0000 of the password during this time Pressing the ENTER button on the remote control or the P button on the projector will return to the TRANSITION DETECTOR on off menu e Please do not forget your TRANSITION DETECTOR password e This function will activate only when the projector is started after turning off the AC power e This feature may not function properly if the projector is not in a stable position when ON is selected 2 Turning off the TRANSITION DETECTOR 2 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 2 2 Select OFF to display the ENTER PASSWORD box large Enter the registered copete 5 password and the screen will return to the ers ear TRANSITION DETECTOR on off menu Jnauiring Code 0123456789 __ If an incorrect password is input the menu will viki close If necessary repeat the process from 2 1 ENTER PASSWORD box large 3 If you have forgotten your password a 3 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration informat
21. the 4 cursor button or ENTER button Even if you do not do anything the dialog will automatically disappear after about 30 seconds e If you want to move the menu position use the cursor buttons after pressing the POSITION button e Some functions cannot be performed when a certain input port is selected or when a certain input signal is displayed e When you want to reset the operation press RESET button on the remote control during the operation Note that some items ex LANGUAGE VOLUME cannot be reset e In the ADVANCED MENU when you want to return to the previous display press the cursor button or ESC button on the remote control Indication in OSD On Screen Display 0 BRIGHTNESS a 4 MY MEMORY _LOAD 4 RETURN S FILTER TIME TEMPORARY CONDITION RESET ARE YOU SURE gt A YOU WISH TO LOAD Y E 3 EXIT E gt YES The meanings of the general words on the OSD are as follows Indication Meaning EXIT Selecting this word finishes the OSD menu It s the same as pressing the MENU button RETURN Selecting this word returns the menu to the previous menu CANCEL or NO Selecting this word cancels the operation in the present menu and returns to the previous menu OK or YES Selecting this word executes the prepared function or shifts the menu to the next menu 25 JASMENO From the EASY MENU items shown in the table L below can be performed AUTO KEYSTONE EXECUTE Select an item using t
22. the A V buttons on the SECURITY menu to select ENTER PASSWORD and press the gt button The ENTER PASSWORD box will be displayed ARE 2 Use the A W gt buttons to enter the registered password ENTER PASSWORD The factory default password is 4610 This password can be 123 changed EHbelow Move the cursor to the right side of the ENTER PASSWORD box and press the button to display the SECURITY ERES menu 2 MyScreen PASSWORD It is strongly recommended the factory default password to be NEO perso changed as soon as possible da e If an incorrect password is input the ENTER PASSWORD box E MY TEXT WRITING will be displayed again If incorrect password is input 3 times the bib projector will turn off Afterwards the projector will turn off every time an incorrect password is input 3 Items shown in the table below can be performed If you have forgotten your password 1 While the ENTER PASSWORD box is displayed press and hold ARN O the RESET button on the remote control for about 3 seconds or ENTER PASSWORD press and hold the INPUT button for 3 seconds while pressing the 0000 gt button on the projector 2 The 10 digit Inquiring Code will be displayed Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed e If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close If necessary repeat the process
23. will be displayed Right side of the menu is blank until a name is specified 3 Select an icon you d like to assign to the port in the SOURCE NAME dialog The name assigned to the port will also be automatically switched according to your icon selection Press the gt or ENTER button to determine your icon selection 4 Select a number you d like to assign for the port along with the icon You can select the number either from blank no number assigned 1 2 3 or 4 5 If you d like to modify the name assigned to the port select CUSTOM NAME and SOURCE NAME press the gt button 6 The current name will be displayed on the first line Use the A W gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button 1 character or all characters will be erased The name can be a maximum g of 16 characters 7 To change an already inserted character press the A button to move the cursor to the first line and use the lt gt buttons to move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 6 above 8 To finish entering text move the cursor to the OK on screen and press the gt
24. 4 15 16 Control panel 1 STANDBY ON button E114 2 INPUT button EH16 24 3 MENU button 424 It consists of four cursor buttons 4 BLANK button E123 5 POWER indicator 412 14 64 6 TEMP indicator EN64 7 LAMP indicator E2164 Rear panel 1010 1 VIDEO port 2 S VIDEO port 3 AUDIO IN1 port 4 AUDIO IN2 port 5 AUDIO OUT port S VIDEO VIDEO O AUDIO IN1 O AUDIO IN2 O o BLANK st 6 7 5 1 D 8 50 6 COMPUTER IN port 7 HDMI port 8 CONTROL port 9 MONITOR OUT port 6 7 HDMI COMPUTER IN Remote control 1 VIDEO button 117 2 COMPUTER button 17 3 SEARCH button L18 4 STANDBY ON button E114 5 ASPECT button E118 6 AUTO button EH20 7 BLANK button 23 8 MAGNIFY ON button 2122 9 MAGNIFY OFF button 122 10 MY SOURCE DOC CAMERA button 117 49 11 VOLUME button 2116 12 PAGE UP button 13 PAGE DOWN button 14 VOLUME button E116 N Non en TS AN AN PT TO MONA O OA OO Nh NO NO Oo m m m lt N a a S NN Nh nananana NOA OO OO O Aa NOS O LITO ATRIO A A ON AR AR IR IR AR a A gt O o e e S N k gt 15 MUTE button 0416 16 FREEZE button 123 17 MY BUTTON 1 button L449 18 MY BUTTON 2 button L449 19 KEYSTONE button 21 20 POSITION button 120 25 21 MENU button L424 22 A V 4
25. 9 MIRROR Using the lt gt buttons switches the mode for mirror status See the MIRROR item in SETUP menu 439 Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE A dialog is displayed for confirmation Selecting the OK using the gt button performs resetting The usage time of the air filter is shown in the menu Performing this item resets the filter time which counts usage time of the air filter A dialog is displayed for confirmation Selecting the OK using the gt button performs resetting See the FILTER TIME item in OPTION menu E148 FILTER TIME Using the lt gt buttons changes the display language LANGUAGE See the LANGUAGE item in SCREEN menu 241 Press the gt or ENTER button to use the menu of PICTURE ADVANCED MENU IMAGE INPUT SETUP AUDIO SCREEN OPTION or SECURITY EXIT Press the or ENTER button to finish the OSD menu 27 PICTURE menu From the PICTURE menu items shown in the table m ADVANCED MENU 2 SELECT C BRIGHTNESS 0 below can be performed INPUT 7 CAMA DEFAULT 1 Select an item using the A V cursor buttons and gt AUDIO a coor press the gt cursor button or ENTER button to 2 option SES a execute the item Then perform it according to the ezo following table COMPUTER IN 1024 x 768 60Hz tem Description O O O Using the lt gt buttons adjusts the brightness BRIGHTNESS Dark Light Using
26. CTURE MODE Eco MODE MIRROR RESET FILTER TIME LANGUAGE ADVANCED MENU EXIT CH PICTURE menu 28 BRIGHTNESS CONTRAST GAMMA COLOR TEMP COLOR TINT SHARPNESS My MEMORY IMAGE menu 31 ASPECT OVER SCAN V POSITION H POSITION H PHASE H SIZE AUTO ADJUST EXECUTE INPUT menu PROGRESSIVE VIDEO NR COLOR SPACE VIDEO FORMAT HDMI FORMAT HDMI RANGE COMPUTER IN FRAME LOCK RESOLUTION SETUP menu AUTO KEYSTONE KEYSTONE AUTO ECO MODE Eco MODE MIRROR STANDBY MODE MONITOR OUT AUDIO menu VOLUME SPEAKER AUDIO SOURCE HDMI AUDIO SCREEN menu 41 LANGUAGE MENU POSITION BLANK START UP MyScreen MyScreen Lock MESSAGE SOURCE NAME TEMPLATE C c OPTION menu AUTO SEARCH AUTO KEYSTONE DIRECT POWER ON AUTO POWER OFF LAMP TIME FILTER TIME My BUTTON My SOURCE SERVICE SECURITY menu SECURITY PASSWORD CHANGE MyScreen PASSWORD PIN LOCK TRANSITION DETECTOR My TEXT PASSWORD My TEXT DISPLAY My TEXT WRITING Maintenance 2 2020000 58 Replacing the lamp 58 Cleaning and replacing the air filter 60 Other Care 1s sauss 060400005 4 62 Troubleshooting 63 Related messages 63 Regarding the indicator lamps 64 Resetting all settings 65 Phenomena that may be easy to be mistaken for machine defects 66 Specifications do WU olA Features The projector provides you with the broad use by the following features
27. O O S VIDEO gt VIDEO wao 0 Oo 0O 6G 2 Using the lt gt buttons switches the mode for video format VIDEO FORMAT AUTO lt gt NTSC gt PAL gt SECAM gt N PAL lt gt M PAL NTSC4 43 lt 1 e This item is performed only for a video signal from the VIDEO port or the S VIDEO port e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well for some signals If the picture becomes unstable e g an irregular picture lack of color please select the mode according to the input signal Using the A Y cursor buttons switches the video format for an input from the HDMI port AUTO VIDEO lt COMPUTER A Feature HDMI FORMAT AUTO automatically sets the optimum mode VIDEO sets the suitable mode for DVD signals COMPUTER sets the suitable mode for computer signals e When the COMPUTER is selected the functions COLOR PICTURE menu TINT PICTURE menu and OVER SCAN IMAGE menu are unavailable Using the A Y cursor buttons changes the digital range for input from the HDMI port AUTO lt gt NORMAL lt gt ENHANCED AA gt Feature AUTO automatically sets the optimum mode NORMAL sets the suitable mode for DVD signals 16 235 ENHANCED sets the suitable mode for computer signals 0 255 e If the contrast of the screen image is too strong or too weak try finding a more suitable mode HDMI RANGE continued on next page 35 ltem
28. ON ENTER NEW PASSWORD The ENTER NEW PASSWORD box small at will be displayed ENTER NEW PASSWORD 1 3 Use the A Y 4 P buttons to enter the box small password Move the cursor to the right side ey of the ENTER NEW PASSWORD box small PS and press the button to display the NEW PASSWORD AGAIN box enter the same PASSWORD again 1 4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the gt button to display the NOTE NEW PASSWORD box for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the MyScreen projector will return to MyScreen PASSWORD on off menu PASSWORD When a password is set for MyScreen e The MyScreen registration function and menu will be unavailable e The MyScreen Lock menu will be unavailable e The START UP setting will be locked on MyScreen and the menu will be unavailable Turning the MyScreen PASSWORD off will allow normal operation of these functions e Please do not forget your MyScreen PASSWORD 2 Turning off the MyScreen PASSWORD 2 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off A F MyScreen PASSWORD E 2 2 Select OFF to display the ENTER ESOO PASSWORD box large Enter the registered ema RAS S A password and the screen will return to the oa MyScreen PASSWORD on off menu ENTER PASSWORD box If an incorrect PASSWORD is input the menu will large close If necessa
29. Projector CPX7 CPX8 CPX9 User s Manual detailed Operating Guide Thank you for purchasing this projector NOVAS MEN VE Various symbols are used in this manual The meanings of these symbols are described below AWARNING This symbol indicates information that if ignored could possibly result in personal injury or even death due to incorrect handling ACAUTION This symbol indicates information that if ignored could possibly result in personal injury or physical damage due to incorrect handling NOTICE This entry notices of fear of causing trouble CN Please refer to the pages written following this symbol NOTE The information in this manual is subject to change without notice e The manufacturer assumes no responsibility for any errors that may appear in this manual e The reproduction transfer or copy of all or any part of this document is not permitted without express written consent Trademark acknowledgment e Mac is a registered trademark of Apple Inc e Microsoft Internet Explorer Windows and Windows Vista are registered trademarks of Microsoft Corporation in the U S and or other countries VESA and DDC are trademarks of the Video Electronics Standard Association e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and ot
30. UME VOLUME buttons to adjust the volume Adialog will appear on the screen to aid you in adjusting the volume If you do not do anything the dialog will automatically disappear after a few seconds e When is selected for current picture input port the volume adjustment is disabled Please see AUDIO SOURCE item of AUDIO menu E140 e Even if the projector is in the standby state the volume can be adjusted when both of following conditions are satisfied NORMAL is selected for the STANDBY MODE in the SETUP menu E139 An item other than X is selected for the AUDIO OUT STANDBY of the AUDIO SOURCE in the AUDIO menu E240 Temporarily muting the sound Press MUTE button on the remote control Adialog will appear on the screen indicating that you have muted the sound To restore the sound press the MUTE VOLUME or VOLUME button Even if you do not do anything the dialog will automatically disappear after a few seconds e When is selected for current picture input port the sound is always muted Please see AUDIO SOURCE item of AUDIO menu 40 e C C Closed Caption is automatically activated when sound is muted and an input signal containing C C is received This function is available only when the signal is NTSC for VIDEO or S VIDEO or 48010060 for COMPUTER IN and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu 446 Selecting an input signal 1 Press INPUT button on the projector INPUT
31. Using the A Y buttons switches the color temperature mode 1HIGH lt gt 1CUSTOM gt 2MD gt 2CUSTOM 2 2 6 CUSTOM 3 LOW 2 2 6 Hi BRIGHT 3 3 CUSTOM 2 2 5 CUSTOM lt gt 5 Hi BRIGHT 2 gt 4 CUSTOM lt gt 4 Hi BRIGHT 1 To adjust CUSTOM Selecting a mode whose name includes A CUSTOM and then pressing the gt button R G B or the ENTER button displays a dialog III to aid you in adjusting the OFFSET and eae COLOR TEMP GAIN of the selected mode CENTER O TEST PATTERN OFFSET adjustments change the color intensity on the whole tones of the test pattern GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern Choose an item using the lt gt buttons and adjust the level using the A V buttons You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps t Ramp Gray scale of 15 steps e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction Using the lt gt buttons adjusts the strength of whole color Weak lt gt Strong e This item can be selected only for a video s video and component video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT
32. and slowly pick up the lamp by the handle Never loosen any other screws 5 Insert the new lamp and retighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place While putting the interlocking parts of the lamp cover and the projector together slide the lamp cover back in place Then firmly fasten the screw of the lamp cover 7 Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu 1 Press the MENU button to display a menu 2 Point at the ADVANCED MENU in the menu using the W A button then press the button 3 Point at the OPTION in the left column of the menu using the V A button then press the button 4 Point at the LAMP TIME using the V A button then press the button A dialog will appear 5 Press the button to select OK on the dialog It performs resetting the lamp time NOTE Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp 58 Replacing the lamp continued Lamp warning AN HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE AWARNING gt The projector uses a high pressure mercury glass lamp The lamp can break with a loud bang or burn out if jolted or scratched handled while hot or worn over time Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them In addition
33. arget image to be displayed and press the ENTER or INPUT button when the image is displayed The image will freeze and the frame for capturing will appear To stop performing press the RESET button on the remote control Using the A lt buttons adjusts the frame position Please move the frame to the position of the image which you want to use The MyScreen frame may not be able to be moved for some input signals To start registration press the ENTER or INPUT button on the remote control To restore the screen and return to the previous dialog press the RESET button on the remote control Registration takes several minutes When the registration is completed the registered screen and the following message is displayed for several seconds MyScreen registration is finished If the registration failed the following message is displayed A capturing error has occurred Please try again e This function cannot be selected when the ON is selected to the MyScreen Lock item 443 e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu 53 e This function is unavailable for a signal from the HDMI port continued on next page 42 ltem Deseription O Using the A Y buttons turns on off the MyScreen lock function ON lt gt OFF MyScreen Lock When the ON is selected the item MyScreen is locked Use this function for protecting the current MyScreen
34. at best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu 35 The vertical position and horizontal position will be AUTO ADJUST automatically set to the default EXECUTE For a component video signal The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e The automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certain extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the PC model e The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu 450 33 ANA AA ADVANCED MENU 2 SELECT From the INPUT menu items shown in the table 4PICTURE EA below can be performed SE V COLORSPACE AUTO Select an item using the A Y cursor buttons and s Sime une press the P cursor button or ENTER button to SON CREAN execute the item Then perform it according to the ESSE RIM following table COMPUTER IN 1024 x 768 60Hz ltem Description O O Using the A W buttons switches the progress
35. correct Correctly set the AUDIO SOURCE SPEAKER in the AUDIO menu The mode selected for HDMI AUDIO is not suitable Check each of the two modes provided and select the suitable one for your HDMI audio device The lens cover is attached 15 Remove the lens cover The signal cables are not correctly connected 10 Correctly connect the connection cables The brightness is adjusted to an extremely low level Adjust the BRIGHTNESS to a higher level using the menu No pictures are function displayed The computer cannot detect the projector as a plug and play monitor Make sure that the computer can detect a plug and play monitor using another plug and play monitor The BLANK screen is displayed Press the BLANK button on the control panel or the remote control Color settings are not correctly adjusted Colors have a Perform picture adjustments by changing the COLOR faded out TEMP COLOR TINT and or COLOR SPACE settings appearance or using the menu functions Color tone is The COLOR SPACE setting is not suitable poor Change the COLOR SPACE setting to the AUTO RGB SMPTE240 REC709 or REC601 Continued on next page 67 Phenomena that may be easy to be mistaken for machine defects continued Reference Phenomenon Cases not involving a machine defect page The brightness and or contrast are adjusted to an extremely low level Adjust the BRIGHTNESS and or CONTRAST settings to a higher level us
36. ction is available only when the MY TEXT 1024 x 768 60Hz FRAME LOCK PASSWORD function is set to the OFF Projector 123 CO RETURN RONS Uu 1 Use the A Y buttons on the S RR T SECURITY menu to select the MY Hrojector0 0123 TEXT WRITING and press the APR EEE button The MY TEXT WRITING dialog a 8 c b E F cH 1 J k L u n o pJo a s r u v v x v z will be displayed Hale brete 2 The current MY TEXT will be displayed PPS e ES on the first 3 lines If not yet written the Ml lines will be blank CRESET J 0 6 DELETE Use the A Y 4 P buttons and the AKT IEC RETA ENTER or INPUT button to select and BrojectorO 01293 enter characters To erase 1 character at one time press the RESET button A B c o E F lelu 3 lx Jl Jun o oz sr ju v v x or press the lt and INPUT button at ofniz ala s a r sle r ra sl la rei Eli the same time Also if you move the A cursor to DELETE or ALL CLEAR on 2 K MY TEXT screen and press the ENTER or INPUT CHEST LO DELETE WRITING button 1 character or all characters will eeuu be erased The MY TEXT can be input APA up to 24 characters on each line EPR RT 3 To change an already inserted ale Je JEJE SJ fe Jufajo loe JJ v a b c d elf g h i j k l min o character press the A V button to 0800084800 move the cursor to one of the first 3 C DELETE J ALL CLEAR lines and use the lt gt buttons to e x move the cursor on the character to be MESE changed After pr
37. ctor environment around the projector etc the automatic adjustment may not work correctly In such a case please choose DISABLE to disable the automatic adjustment and make adjustment manually GHOST 1 Select a color element of ghost using the lt P gt buttons 2 Adjust the selected element using the A V buttons to disappear ghost FILTER MESSAGE Use the A V button to set the timer for notifying by the message when to replace the filter unit 100h lt gt 200h lt gt 500h lt gt 1000h lt gt 2000h lt gt 3000h lt gt 4000h lt gt 5000h lt gt OFF After choosing an item except OFF the message REMINDER HRS PASSED will appear after the timer reaches the interval time set by this feature G63 When the OFF is chosen the message will not appear Utilize this feature to keep the air filter clean setting the suitable time according to your environment of this projector e Please take care of the filter unit periodically even if there is no message If the air filter becomes to be blocked by dust or other matter the internal temperature will rise which could cause malfunction or reduce the lifetime of the projector e Please be careful with the operating environment of the projector and the condition of the filter unit SERVICE 2 SERVICE_GHOST continued on next page 50 ltem Deseription O O KEY LOCK Using the A Y buttons turns on off the key lock feature When ON is selected the
38. d then result in fire and or electric shock e Do not place the projector on an unstable slanted or vibrational surface such as a wobbly or inclined stand e Do not place the projector on its side front or rear position e Consult with your dealer before a special installation such as suspending from a ceiling or somewhere else gt Place the projector in a cool place and ensure that there is sufficient ventilation The high temperature of the projector could cause fire burns and or malfunction of the projector e Do not place or attach anything that would block the lens or vent holes e Keep a space of 30 cm or more between the sides of the projector and other objects such as walls e Do not place the projector on metallic thing or anything weak in heat e Do not place the projector on carpet cushions or bedding e Do not place the projector in direct sunlight or near hot objects such as heaters e Do not place anything near the projector lens or vents or on top of the projector e Do not place anything that may be sucked into or stick to the vents on the bottom of the projector This projector has some intake vents also on the bottom gt Do not place the projector anyplace where it may get wet Getting the projector wet or inserting liquid into the projector could cause fire electric shock and or malfunction of the projector e Do not place the projector in a bathroom or the outdoors e Do not place anything containing li
39. ded in the function s name and adjusts the picture automatically depending on the data e The LOAD functions whose linked memory has no data are skipped e Remember that the current adjusted condition will be lost by loading data If you want to keep the current adjustment please save it before performing a LOAD function e There may be some noise and the screen may flicker for a moment when loading data This is not malfunction e You can perform the LOAD function using MY BUTTONS Please see MY BUTTON item in OPTION menu 449 30 IWASE AU ADVANCED MENU 5 SELECT From the IMAGE menu items shown in the table saue ONE RR below can be performed T V POSITION Select an item using the A Y cursor buttons and b AUDIO C HPHASE press the gt cursor button or ENTER button to 2 no AUTOADVUST EXECUTE execute the item Then perform it according to the da following table COMPUTER IN 1024 x 768 60Hz ltem Deseription O Using the A Y buttons switches the mode for aspect ratio For a computer signal NORMAL lt gt 4 3 gt 16 9 gt 16 10 For an HDMI signal NORMAL lt gt 4 3 lt 16 9 lt gt 16 10 lt gt 14 9 ASPECT OOOO For a video signal s video signal or component video signal 4 3 O 16 9 amp 14 9 te For no signal 4 3 fixed e The NORMAL mode keeps the original aspect ratio of the signal Using the lt gt buttons adjusts the over scan ratio Small It magnifies picture lt gt
40. e company The cooling fan is not operating Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation that no foreign matter has become caught in the fan etc and then turn the power on again If the same indication is displayed after the remedy please contact your dealer or service company Regarding the indicator lamps continued POWER indicator indicator indicator Description There is a possibility that the interior portion has become heated Please turn the power off and allow the projector to cool down at least in Red 20 minutes After the projector has sufficiently cooled down please make Lighting confirmation of the following items and then turn the power on again Li e InRed Is there blockage of the air passage aperture OO e Is the air filter dirty In Red e Does the peripheral temperature exceed 35 C If the same indication is displayed after the remedy please set FAN SPEED of SERVICE item in OPTION menu to HIGH 2150 It is time to clean the air filter Please immediately turn the power off and clean or Lighting Simultaneous change the air filter referring to the section Cleaning In Green blinking in Red and replacing the air filter After cleaning or changing the air filter please be sure to reset the filter timer After the remedy reset the power to ON Blinking There i
41. ecommended to use other CRT or LCD monitors to change the resolution e In some cases this projector may not display a proper picture or display any picture on screen For example automatic adjustment may not function correctly with some input signals An input signal of composite sync or sync on G may confuse this projector so the projector may not display a proper picture About Plug and Play capability Plug and Play is a system composed of a PC its operating system and peripheral equipment i e display devices This projector is VESA DDC 2B compatible Plug and Play can be used by connecting this projector to a PC that is VESA DDC display data channel compatible e Take advantage of this feature by connecting a computer cable to the COMPUTER IN port DDC 2B compatible Plug and Play may not work properly if any other type of connection is attempted e Please use the standard drivers in your PC as this projector is a Plug and Play monitor 11 Connecting power supply 1 Put the connector of the power cord into the AC IN AC inlet of the projector 2 Firmly plug the power cord s plug into the outlet In a couple of seconds after the power supply connection the POWER T 2 indicator will light up in steady orange M Please remember that when the DIRECT POWER ON function activated 1147 the connection of AC IN the power supply make the projector turn on Power cord AWARNING b Please use extra caution when c
42. ended from the ceiling this feature will not function properly so select the OFF e This function will be unavailable when the Transition Detector is on M55 Using the A Y buttons turns on off the DIRECT POWER ON function ON lt gt OFF When set to the ON the lamp in projector will be automatically turned on without the usual procedure 14 only when the projector is supplied with the power after the power was cut while the lamp was on e This function does not work as long as the power has been supplied to the projector while the lamp is off e After turning the lamp on by the DIRECT POWER ON function if neither input nor operation is detected for about 30 minutes the projector is turned off even though the AUTO POWER OFF function 248 is disabled continued on next page 47 lem Description O O O Using the A V buttons adjusts the time to count down to automatically turn the projector off Long max 99 minutes lt gt Short min O minute DISABLE AUTO POWER OFF AUTO POWER OFF ENABLE DISABLE pas M zZ CO RETURN 1 EXIT CO RETURN EXIT AUTO POWER When the time is set to 0 the projector is not turned off automatically OFF When the time is set to 1 to 99 and when the passed time with no signal or an unsuitable signal reaches at the set time the projector lamp will be turned off If one of the projector s buttons or the remote control buttons is pressed or one of the commands e
43. essing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 2 above 4 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous MY TEXT without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button The MY TEXT WRITING function is available only when the MY TEXT PASSWORD function is set to OFF of Main te a ce Replacing the lamp A lamp has finite product life Using the lamp for long periods of time could cause the pictures darker or the color tone poor Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them Preparation of a new lamp and early replacement are recommended To prepare a new lamp make contact with your dealer and tell the lamp type number Type number DT01141 Replacing the lamp 1 Turn the projector off and unplug the power cord Allow the projector to cool for at least 45 minutes 2 Prepare a new lamp If the projector is mounted on a ceiling or if the lamp has broken also ask the dealer to replace the lamp Lamp cover In case of replacement by yourself follow the following procedure 3 Loosen the screw marked by arrow of the lamp cover and then slide and lift the lamp cover to the side to remove it Loosen the 2 screws marked by arrow of the lamp
44. f you will not use the remote control for long period remove the batteries from the remote control and store them in a safe place 1 Holding the hook part of the battery cover remove it 2 Align and insert the two AA batteries HITACHI MAXELL Part No LR6 or R6P according to their plus and minus terminals as indicated in the remote control 3 Replace the battery cover in the direction of the arrow and snap it back into place AWARNING gt Always handle the batteries with care and use them only as directed Improper use may result in battery explosion cracking or leakage which could result in fire injury and or pollution of the surrounding environment e Be sure to use only the batteries specified Do not use batteries of different types at the same time Do not mix a new battery with used one e Make sure the plus and minus terminals are correctly aligned when loading a battery e Keep a battery away from children and pets e Do not recharge short circuit solder or disassemble a battery e Do not place a battery in a fire or water Keep batteries in a dark cool and dry place e If you observe battery leakage wipe out the leakage and then replace a battery If the leakage adheres to your body or clothes rinse well with water immediately e Obey the local laws on disposing the battery About the remote control signal The remote control works with the projector s remote _ Val il ji J I
45. firmed the following items please turn the power ON again e Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 35 C If the same indication is displayed after the remedy please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH STS A note of precaution when cleaning the air filter 5000HRS PASSED AFTER THE Please immediately turn the power off and clean or change a AN the air filter referring to the Cleaning and replacing the FILTER MAINTENANCE IS ESSENTIAL air filter section of this manual After you have cleaned or TO REMOVE WARNING MESSAGE r i F js RESET FILTER TIMER changed the air filter please be sure to reset the filter timer 148 SEE MANUAL FURTHER INFO TS The button operation is not available 16 Regarding the indicator lamps When operation of the LAMP TEMP and POWER indicators differs from usual check and cope with it according to the following table POWER indicator indicator indicator Description Lighting In Orange Blinking In Green Turned Turned Tu off off l Lighting Turned Turned The projector is in an on state In Green off off Ordinary operations may be performed The projector is in a standby state Please refer to the section Power on off rned The projector is warming up Please wait Blinking Turned Turned The projector is cooling down In Oran
46. for devices before connecting them to the projector and make sure that all the devices are suitable to be connected with this product Before connecting to a PC check the signal level the signal timing and the resolution Some signal may need an adapter to input this projector Some PCs have multiple screen display modes that may include some signals which are not supported by this projector Although the projector can display signals with resolution up to UXGA 1600X1200 the signal will be converted to the projector s panel resolution before being displayed The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical e While connecting make sure that the shape of the cable s connector fits the port to connect with And be sure to tighten the screws on connectors with screws e When connecting a laptop PC to the projector be sure to activate the PC s external RGB output Set the laptop PC to CRT display or to simultaneous LCD and CRT display For details on how this is done please refer to the instruction manual of the corresponding laptop PC e When the picture resolution is changed on a PC depending on an input automatic adjustment function may take some time and may not be completed In this case you may not be able to see a check box to select Yes No for the new resolution on Windows Then the resolution will go back to the original It might be r
47. from 1 SECURITY gt Inquiring Code 01 2345 6789 Description 1 Use the A V buttons on the SECURITY menu ETS to select SECURITY PASSWORD CHANGE ENTER NEW PASSWORD and press the P button to display the ENTER 0000 NEW PASSWORD box 2 Use the A W gt buttons to enter the new password 3 Move the cursor to the right side of the ENTER NEW PASSWORD box and press the MEX SECURITY gt button to display the NEW PASSWORD NEW PASSWORD AGAIN PASSWORD AGAIN box enter the same password again ees CHANGE 4 Move the cursor to the right side of the NEW RE S PASSWORD AGAIN box and press the NOTE NEW PASSWORD button and the NOTE NEW PASSWORD box 0000 will be displayed for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the projector will close the NOTE NEW PASSWORD box e Please do not forget your password continued on next page 52 ltem Deseription O The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten 1 Turning on the MyScreen PASSWORD 1 1 Use the A Y buttons on the SECURITY menu to F MyScreen PASSWORD select MyScreen PASSWORD and press the ON button to display the MyScreen PASSWORD on RETURN EXIT off menu 1 2 Use the A V buttons on the MyScreen F MyScreen PASSWORD PASSWORD on off menu to select
48. ge off off Please wait Blinking In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red discre tionary Lighting In Red Blinking In Red discre tionary Blinking In Red Continued on next page 64 The projector is cooling down A certain error has been detected Please wait until POWER indicator finishes blinking and then perform the proper measure using the item descriptions below The lamp does not light and there is a possibility that interior portion has become heated Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation of the following items and then turn the power on again e Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 35 C If the same indication is displayed after the remedy please change the lamp referring to the section Replacing the lamp The lamp cover has not been properly fixed Please turn the power off and allow the projector to cool down at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp cover After performing any needed maintenance turn the power on again If the same indication is displayed after the remedy please contact your dealer or servic
49. he A Y cursor buttons Then A ar MN perform it according to the following table Son Baa Item 1 RESET EXECUTE FILTER TIME Oh LANGUAGE ENGLISH ADVANCED MENU COMPUTERIN EXIT 1024 x 768 60Hz Description ASPECT AUTO KEYSTONE KEYSTONE PICTURE MODE continued on next page 26 Using the lt gt buttons switches the mode for aspect ratio See the ASPECT item in IMAGE menu 31 Using the button executes the auto keystone function See the AUTO KEYSTONE item in SETUP menu 438 Using the lt gt buttons corrects the vertical keystone distortion See the KEYSTONE item in SETUP menu E138 Using the lt gt buttons switches the picture mode The picture modes are combinations of GAMMA and COLOR TEMP settings Choose a suitable mode according to the projected source DG lt gt CINEMA lt DYNAMIC lt gt BOARD BLACK 7 DAYTIME lt WHITEBOARD lt BOARD GREEN GAMMA COLOR TEMP NORMAL 1 DEFAULT 2 MID e When the combination of GAMMA and COLOR TEMP differs from pre assigned modes above the display on the menu for the PICTURE MODE is CUSTOM Please refer to the GAMMA and COLOR TEMP 128 29 items in PICTURE menu e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction ltem Deseription O Using the lt gt buttons changes the eco mode setting ECO MODE See the ECO MODE item in SETUP menu 23
50. he STANDBY MODE item in the SETUP menu Using the A W buttons switches the mode for the HDMI audio Check each of the two modes provided and select the suitable one for your HDMI audio device 182 a AUDIO SOURCE AUDIO IN COMPUTER IN HDMI S VIDEO VIDEO AUDIO OUT STANDBY EXIT SCREEN menu BB ADVANCED MENU 2 SELEGIT From the SCREEN menu items shown in the table secre UTE cat below can be performed S INPUT BLANK BLACK Select an item using the A Y cursor buttons and gt AUDIO E MyScreen EXECUTE Oo El MyScreen Lock OFF press the cursor button or ENTER button to 2 OPTION MESSAGE ON Y SECURITY EY SOURCE NAME execute the item Then perform it according to the E Galli TEST PATTERN following table COMPUTER IN 1024 x 768 60Hz ltem Deseription O Using the A Y 4 P buttons switches the OSD On Screen Display language LANGUAGE ENGLISH lt gt FRANCAIS lt gt DEUTSCH lt gt ESPA OL shown in the LANGUAGE dialog Press the ENTER or INPUT button to save the language setting Using the A Y 4 P buttons adjusts the menu position MENU POSITION To quit the operation press the MENU button on the remote control or keep no operation for about 10 seconds Using the A Y buttons switches the mode for the blank screen The blank screen is a screen for the temporarily blanking feature E123 It is displayed by pressing the BLANK button on the remote control MyScreen lt gt ORIGINAL
51. he adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when the Transition Detector is on E55 Using the A Y buttons turns on off the AUTO ECO MODE ON lt gt OFF AUTO ECO When ON is selected the projector will always be set to Eco mode MODE at start up regardless of the ECO MODE 439 setting An OSD message AUTO ECO MODE will be displayed for tens of seconds when the projector starts with this function activated continued on next page 38 ltem Deseription O Using the A Y buttons changes the eco mode setting NORMAL lt gt ECO e When the ECO is selected acoustic noise and screen brightness are reduced Using the A Y buttons switches the mode for mirror status MIRROR NORMAL lt gt H INVERT lt gt V INVERT lt gt H8V INVERT If the Transition Detector is on and MIRROR status is changed TRANSITION DETECTOR ON alarm E155 will be displayed when projector is restarted after the AC power is turned off Using A V buttons switches the standby mode setting between NORMAL and SAVING NORMAL lt gt SAVING When SAVING is selected and the projector is in the standby state the power consumption is lowered with some functional STANDBY MODE restrictions as below The RS 232C communication control is disabled except turning the projector on and changing the STANDBY MODE setting The STANDBY of the MONITOR
52. her countries e Blu ray Disc and Blu ray are trademarks of Blu ray Disc Association All other trademarks are the properties of their respective owners CH Introduction auna 3 Features 0c eee 3 Checking the contents of package 3 Part names 008800000 ee Al RLOJSCIOP 232 13 sams he ikani 4 Control panel 5 Rear panel 5 Remote control 6 Setting up 0 02 ee eee 7 Arrangement T Connecting your devices 10 Connecting power supply 12 Using the security bar and slot 12 Remote control 13 Installing the batteries 13 About the remote control signal 13 Power on off aaa 14 Turning on the power 14 Turning off the power 14 Operating c 0 0o0o o0o0oo lt 0 5 16 Adjusting the volume 16 Temporarily muting the sound 16 Selecting an input signal 16 Searching an input signal 18 Selecting an aspect ratio 18 Adjusting the projector s elevator 19 Adjusting the zoom and focus 19 Using the automatic adjustment feature 20 Adjusting the position 20 Correcting the keystone distortions 21 Using the magnify feature 22 Temporarily freezing the screen 23 Temporarily blanking the screen 23 Using the menu function 24 EASY MENU 26 ASPECT AUTO KEYSTONE KEYSTONE PI
53. ight be used for secondary language or empty 46 OPJNON menu From the OPTION menu items shown in the table below can be performed Select an item using the A Y cursor buttons and press the P cursor button or ENTER button to execute the item except for the items LAMP TIME and FILTER TIME Then perform it according to the following table ADVANCED MENU Y PICTURE IMAGE 3 INPUT 4 SETUP SELECT se AUTO SEARCH go AUTO KEYSTONE DIRECT POWER ON AUTO POWER OFF ft LAMP TIME 4 FILTER TIME MY BUTTON a MY SOURCE VIDEO Y SERVICE Y AUDIO O SCREEN Y SECURITY 38 EASY MENU EXIT COMPUTER IN 1024 x 768 60Hz Description AUTO SEARCH AUTO KEYSTONE DIRECT POWER ON Using the A Y buttons turns on off the automatic signal search function ON lt gt OFF When the ON is selected detecting no signal automatically cycles through input ports in the following order The search is started from the current port Then when an input is found the projector will stop searching and display the image oo gt HDMI VIDEO amp S VIDEO Using the A Y buttons turns on off the automatic keystone function ON lt OFF ON Automatic keystone distortion correction will be executed whenever changing the slant of the projector OFF This function is disabled Please execute the AUTO KEYSTONE in the SETUP menu for automatic keystone distortion correction e When the projector is susp
54. in the INPUT menu 4135 The vertical position and horizontal position will be automatically set to the default O For a component video signal The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e The automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certain extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the PC model e The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu E150 AUTO button Adjusting the position Press POSITION button on the remote control when no menu is indicated The POSITION indication will appear on the screen 2 Use the A V gt cursor buttons to adjust the picture position When you want to reset the operation press RESET button on the remote control during the operation To complete this operation press POSITION button again Even if you do not do anything the dialog will automatically disappear after a few seconds POSITION button e When this function is performed on a video signal or s video signal or component video signal some image such as an e
55. ing the menu function Pictures appear The ECO MODE function is working dark Select the NORMAL for the ECO MODE item in the SETUP menu The lamp is approaching the end of its product lifetime Replace the lamp Either the focus and or horizontal phase settings are not properly adjusted Pictures appear Adjust the focus using the focus ring and or the H PHASE blurry using the menu function The lens is dirty or misty 62 Clean the lens referring to the section Caring for the lens No signalis The SAVING function is working in the standby state output from the Select the NORMAL for the STANDBY MODE item in the MONITOR OUT SETUP menu and AUDIO OUT ports RS 232C does not work When the projector is operating in Eco mode flickering may appear on screen l Set ECO MODE to NORMAL and set AUTO ECO MODE to Some kind OFF in the SETUP menu of image degradation The OVER SCAN ratio is too big 34 such as Adjust OVER SCAN in the IMAGE menu smaller flickeringor Excessive VIDEO NR stripes appear Change the setting of VIDEO NR in the INPUT menu on the screen The FRAME LOCK function cannot work on the current input signal Set FRAME LOCK in the INPUT menu to OFF Continued on next page 68 Phenomena that may be easy to be mistaken for machine defects continued NOTE Although bright spots or dark spots may appear on the screen this is a unique characteristic of liquid crystal di
56. ion is confirmed lt lt TRANSITION DETECTOR ON gt gt CO RETURN EXIT continued on next page 55 ltem Deseription O O The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten When the password is set for the MY TEXT e The MY TEXT DISPLAY menu will be unavailable which can prohibit changing the DISPLAY setting The MY TEXT WRITING menu will be unavailable which can prevent the MY TEXT from being overwritten 1 Turning on the MY TEXT PASSWORD 1 1 Use the A Y buttons on the SECURITY menu to select the MY TEXT PASSWORD and press the gt button to display the MY TEXT PASSWORD on off menu 1 2 Use the A V buttons on the MY TEXT PASSWORD on off menu to select ON The on O ENTER NEW PASSWORD box small will ENTER NEW PASSWORD be displayed 0000 1 3 Use the A W gt buttons to enter the ENTER NEW PASSWORD password Move the cursor to the right side box small of the ENTER NEW PASSWORD box small and press the P button to display the NEW F MY TEXT PASSWORD O PASSWORD AGAIN box and then enter the NEW PASSWORD AGAIN same password again 0000 1 4 Move the cursor to the right side of the MY TEXT NEW PASSWORD AGAIN box and press PASSWORD gt button to display the NOTE NEW PASSWORD box for about 30 seconds EI then please make note of the password during this time Pressing the ENTER button on the remote control or button on the projector will return to the MY TEXT PASSWORD on off
57. l sensor This projector has a remote sensor on the front Approx The sensor senses the signal within the following range 3M go when the sensor is active w 30 60 degrees 30 degrees to the left and right of the sensor A within 3 meters about NOTE The remote control signal reflected in the screen or the like may be available If it is difficult to send the signal to the sensor directly attempt to make the signal reflect e The remote control uses infrared light to send signals to the projector Class 1 LED so be sure to use the remote control in an area free from obstacles that could block the remote control s signal to the projector e The remote control may not work correctly if strong light such as direct sun light or light from an extremely close range such as from an inverter fluorescent lamp shines on the remote sensor of the projector Adjust the position of projector avoiding those lights Power on off STANDBY ON button Turning on the power POWER indicator 1 Make sure that the power cord is firmly and correctly connected to the projector and the outlet 2 Make sure that the POWER indicator is steady orange M464 Then remove the lens cover 3 Press STANDBY ON button on the projector or the remote control The projection lamp will light up and POWER indicator will begin blinking in green When the power is completely on the indicator will stop blinking and light in steady green E0164 To disp
58. l or an s video signal the range of this adjustment depends on OVER SCAN E131 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the HDMI port continued on next page 32 ltem Deseription O Using the lt gt buttons adjusts the horizontal phase to eliminate flicker Right lt gt Left e This item can be selected only for a computer signal or a component video signal e This function is unavailable for a signal from the HDMI port H PHASE Using the lt gt buttons adjusts the horizontal size Small lt gt Large e This item can be selected only for a computer signal e This function is unavailable for a signal from the HDMI port e When this adjustment is excessive the picture may not be displayed correctly In such a case please reset the adjustment by pressing the RESET button on the remote control during this operation e Images might appear degraded when this function is operated but it is not a malfunction Selecting this item performs the automatic adjustment feature For a computer signal The vertical position the horizontal position and the horizontal phase will be automatically adjusted Make sure that the application window is set to its maximum size prior to attempting to use this feature A dark picture may still be incorrectly adjusted Use a bright picture when adjusting For a video signal and s video signal The video form
59. lay the picture select an input signal according to the section Selecting an input signal 116 Turning off the power 1 Press the STANDBY ON button on the projector or the remote control The message Power off will appear on the screen for about 5 seconds 2 Press the STANDBY ON button again while the message appears The projector lamp will go off and the POWER indicator will begin blinking in orange Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete E164 3 Attach the lens cover after the POWER indicator turns in steady orange Do not turn the projector on for about 10 minutes or more after turning it off Also do not turn the projector off shortly after turning it on Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp NOTE Turn the power on off in right order Please power on the projector prior to the connected devices e This projector has the function that can make the projector automatically turn on off Please refer to the DIRECT POWER ON 2147 and AUTO POWER OFF E148 items of the OPTION menu Precaution for lens cover attachment and removal When you attach or remove the lens cover move it vertically up and down while keeping the knob to the right as illustrated in the figure T5 Operating Adjusting the volume VOLUME button 1 Use the VOL
60. les or other presentation or other EN relevant sounds It is required to have NTSC format video or 48010260 format component video source supporting C C feature to utilize this function It may not work properly depending on equipment or signal source In this case please turn off the Closed Caption DISPLAY Select Closed Caption DISPLAY setting from following options using A V buttons AUTO lt gt ON gt OFF kus AUTO Closed Caption automatically displays when the volume is muted ON Closed Caption is on OFF Closed Caption is off e The caption is not displayed when the OSD menu is active e The Closed Caption is the function to display the dialogue narration and or sound effects of a television program or other C C video sources The Closed Caption availability is depending upon Closed Caption broadcaster and or content MODE Select Closed Caption MODE setting from following options using A V buttons CAPTIONS lt gt TEXT CAPTIONS Display Closed Caption TEXT Display Text data which is for additional information such as news reports or a TV program guide The information covers the entire screen Not all of the C C program has Text information CHANNEL Select Closed Caption CHANNEL from following options using A V buttons 1525354 1 Channel 1 primary channel language 2 Channel 2 3 Channel 3 4 Channel 4 The channel data may vary depending on the content Some channel m
61. lt gt BLUE lt gt WHITE lt gt BLACK MyScreen Screen can be registered by the MyScreen item 142 ORIGINAL Screen preset as the standard screen BLUE WHITE BLACK Plain screens in each color e To avoid remaining as an afterimage the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes Using the A V buttons switches the mode for the start up screen The start up screen is a screen displayed when no signal or an unsuitable signal is detected MyScreen lt ORIGINAL lt gt OFF El MyScreen Screen can be registered by the MyScreen item L142 START UP ORIGINAL Screen preset as the standard screen OFF Plain black screen e To avoid remaining as an afterimage the MyScreen or ORIGINAL screen will change to the BLANK screen EH23 after several minutes If also the BLANK screen is the MyScreen or ORIGINAL the plain black screen is instead used e When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu 453 the START UP is fixed to MyScreen continued on next page 41 ltem Deseription O This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen Display the image you want to capture before executing the following procedure 1 Selecting this item displays a dialog titled MyScreen It will ask you if you start capturing an image from the current screen Please wait for the t
62. menu is set to AUTO and the projector recognizes that it receives video signals Using the lt gt buttons adjusts the tint Reddish lt gt Greenish e This item can be selected only for a video s video and component video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals continued on next page 29 ltem Deseription O Using the lt gt buttons adjusts the sharpness Weak lt gt Strong SHARPNESS e There may be some noise and or the screen may flicker for a moment when an adjustment is made This is not a malfunction This projector has 4 memories for adjustment data for all the items of the PICTURE menu Selecting a function using the A V buttons and pressing the gt or ENTER button performs each function gn lt gt SAVE 2 lt gt SAVE 3 lt SAVE 4 LOAD 4 LOAD 3 lt gt LOAD 2 lt gt LOAD 1 SAVE 1 SAVE 2 SAVE 3 SAVE 4 Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function s name e Remember that the current data being stored of a memory will be lost by saving new data into the memory MY MEMORY LOAD 1 LOAD 2 LOAD 3 LOAD 4 Performing a LOAD function loads the data from the memory linked in the number inclu
63. on off the ECO MODE dialog E139 e BLANK Turns on off the blank function BLANK only e FREEZE Turns on off the freeze function BLANK only e VOLUME Turns on off the volume dialog BLANK only e AUTO Performs the automatic adjustment function BLANK only gt No saved data Using A V buttons selects the picture input port to be selected with pressing the MY SOURCE DOC CAMERA button on the remote control MY SOURCE Select the picture input that is connected with a document camera Eee IN lt gt HDMI VIDEO gt S VIDEO continued on next page 49 len Description U U U O Selecting this item displays the SERVICE Y SERVICE menu AUTO ADJUST FAST 8 GHOST Select an item using the A V buttons amp FILTER MESSAGE 5000h and press the P button or the ENTER od OFF button on the remote control to execute a the item FAN SPEED Using the A V buttons switches the rotation speed of the cooling fans The HIGH is the mode for use at highlands etc Note that the projector is noisier when the HIGH is selected HIGH lt gt NORMAL AUTO ADJUST Using the A V buttons to select one of the mode When the DISABLE is selected the automatic adjustment feature is disabled FINE lt gt FAST lt DISABLE EM FINE Finer tuning including H SIZE adjustment FAST Faster tuning setting H SIZE to prearranged data for the input signal Depending on conditions such as input image signal cable to the proje
64. onnecting the power cord as incorrect or faulty connections may result in fire and or electrical shock e Only use the power cord that came with the projector If it is damaged consult your dealer to get a new one e Only plug the power cord into an outlet whose voltage is matched to the power cord The power outlet should be close to the projector and easily accessible Remove the power cord for complete separation e Never modify the power cord Using the security bar and slot Security slot A commercially available anti theft chain or wire can be attached to the security bar on the projector TE Refer to the figure to choose an anti theft chain or wire S Also this product has the security slot for the S Kensington lock For details see the manual of the security tool Security bar 12 mm Anti theft chain or wire 18 mm Installation surface 10 mm AWARNING b Do not use the security bar and slot to prevent the projector from falling down since it is not designed for it ACAUTION Do not place anti theft chain or wire near the exhaust vents It may become too hot NOTE The security bar and slot is not comprehensive theft prevention measures It is intended to be used as supplemental theft prevention measure 12 Remote control Installing the batteries Please insert the batteries into the remote control before using it If the remote control starts to malfunction try to replace the batteries I
65. ow screws e Do not open the lamp cover while the projector is suspended from a ceiling This is dangerous since if the lamp s bulb has broken the shards will fall out when the cover is opened In addition working in high places is dangerous so ask your local dealer to have the lamp replaced even if the bulb is not broken e Do not use the projector with the lamp cover removed At the lamp replacing make sure that the screws are screwed in firmly Loose screws could result in damage or injury e Use only the lamp of the specified type Use of a lamp that does not meet the lamp specifications for this model could cause a fire damage or shorten the life of this product e If the lamp breaks soon after the first time it is used it is possible that there are electrical problems elsewhere besides the lamp If this happens consult your local dealer or a service representative e Handle with care jolting or scratching could cause the lamp bulb to burst during use e Using the lamp for long periods of time could cause it dark not to light up or to burst When the pictures appear dark or when the color tone is poor please replace the lamp as soon as possible Do not use old used lamps this is a cause of breakage Cleaning and replacing the air filter The air filter unit of this projector consists of a filter cover two kinds of filters and a filter frame The new double large filters system is expected to function longer However
66. p Filter coarse meshed 8 Put the filter unit back into the projector Filter fine meshed ss SS Stitched SSZ N side continued on next page 60 Cleaning and replacing the air filter continued 9 Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU 1 Press the MENU button to display a menu 2 Point at the FILTER TIME using the Y A button then press the P button A dialog will appear 3 Press the button to select OK on the dialog It performs resetting the filter time NOTE Please replace the air filter when it is damaged or too soiled e When you replace the projection lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e The projector may display the message such as CHECK THE AIR FLOW or turn off the projector to prevent the internal heat level rising 61 Other care Inside of the projector In order to ensure the safe use of your projector please have it cleaned and inspected by your dealer about once every year Caring for the lens If the lens is flawed soiled or fogged it could cause deterioration of display quality Please take care of the lens being cautious of handling 1 Turn the projector off and unplug the power co
67. please check and clean it periodically to keep ventilation needed for normal operation of the projector When the indicators or a message prompts you to clean the air filter comply with it as soon as possible Replace the filters when they are damaged or too soiled To prepare new filters make contact with your dealer and tell the following type number Type number UX36761 Filter set When you replace the lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector 1 Turn the projector off and unplug the power cord 2 Allow the projector to sufficiently cool down Use a vacuum cleaner on and around the filter cover Pick and pull up the filter cover knobs to take it off Use a vacuum cleaner for the filter vent of the e DES A projector pH ii jA UA g File HE C Take the fine meshed filter out while holding the filter cover It is recommended to leave the coarse meshed filter in the filter cover as it is a BON 6 Use a vacuum cleaner on both sides of the fine meshed filter while holding it so it will not be sucked in Use a vacuum cleaner for the inside of the filter cover to clean up the coarse meshed filter If the filters are damaged or heavily soiled replace them with new ones 7 Put the fine meshed filter on the coarse meshed one turning its stitched side u
68. projector in the FREEZE mode for too long e Images might appear degraded when this function is operated but it is not a malfunction Temporarily blanking the screen BLANK button 1 Press the BLANK button on the control panel or the remote control The BLANK screen will be displayed instead of the screen of input signal Please refer to BLANK item in SCREEN menu 41 To exit from the BLANK screen and return to the input signal screen press BLANK button again e The projector automatically exits from the BLANK mode when some control buttons are pressed e You can change the function assigned to the BLANK button on the control panel by the MY BUTTON function Please refer to MY BUTTON item in OPTION menu 0149 BLANK button NOTE The sound is not connected with the BLANK screen function If necessary set the volume or mute first To display the BLANK screen and mute the sound at one time use AV MUTE function L449 Using the menu function This projector has the following menus PICTURE IMAGE INPUT SETUP AUDIO SCREEN OPTION SECURITY and EASY MENU EASY MENU consists of functions often used and the other menus are classified into each purpose and brought together as the ADVANCED MENU Each of these menus is operated using the same methods While the projector is displaying any menu the MENU button on the projector works as the cursor buttons The basic operations of these menus are as follows
69. quid near the projector gt Do not place the projector where any oils such as cooking or machine oil are used gt Use only the mounting accessories the manufacturer specified and leave installing and removing the projector with the mounting accessories to the service personnel e Read and keep the user s manual of the mounting accessories used ACAUTION b Avoid placing the projector in smoky humid or dusty place Placing the projector in such places could cause fire electric shock and or malfunction of the projector e Do not place the projector near humidifiers smoking spaces or a kitchen Also do not use an ultrasonic humidifier near the projector Otherwise chlorine and minerals contained in tap water are atomized and could be deposited in the projector causing image degradation or other problems Position the projector to prevent light from directly hitting the projector s remote sensor Connecting your devices Be sure to read the manuals for devices before connecting them to the projector Make sure that all the devices are suitable to be connected with this product and prepare the cables required to connect Please refer to the following illustrations to connect them To input component video signal to COMPUTER IN port please see the description of the COMPUTER IN item of the INPUT menu 436 Monitor PC AUDIO OUT RGB OUT AUDIO OUT 09000 90000 anane anna
70. r user registration information is confirmed PIN BOX continued on next page 94 Description If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded the tom previously etal position TRANSITION DETECTOR ON alarm will be displayed A x ejam and the projector will not display the input signal See ae atari cr ert e To display the signal again set this function OFF e After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm the lamp will turn off e Keystone adjustment feature has been prohibited as long as the Transition Detector function is on 1 Turning on the TRANSITION DETECTOR 1 1 Use the A buttons on the SECURITY menu BI SANE TONDETECTOA EN O to select TRANSITION DETECTOR and press ON the gt or the ENTER button to display the TRANSITION DETECTOR on off menu 1 2 Use the A V buttons on the TRANSITION DETECTOR on off menu to select ON Select EE O ON and the current angle and MIRROR ENTER NEW PASSWORD setting will be recorded The ENTER NEW 0000 PASSWORD box small will be displayed ENTER NEW PASSWORD 1 3 Use the A W gt buttons to enter a box small password Move the cursor to the right side of the ENTER NEW PASSWORD box small and press the button to display the NEW TRANSITION DETECTOR O PASSWORD AGAIN box enter the same NEW PASSWORD AGAIN TRANSITION password again
71. rd Allow the projector to cool sufficiently 2 After making sure that the projector is cool adeguately lightly wipe the lens with a commercially available lens cleaning wipe Do not touch the lens directly with your hand Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration peeling paint etc 1 Turn the projector off and unplug the power cord Allow the projector to cool sufficiently 2 After making sure that the projector is cool adeguately lightly wipe with gauze orasoftcloth If the projector is extremely dirty dip soft cloth in water or a neutral cleaner diluted in water and wipe lightly after wringing well Then wipe lightly with a soft dry cloth AWARNING b Before caring make sure the power cord is not plugged in and then allow the projector to cool sufficiently The care in a high temperature state of the projector could cause a burn and or malfunction to the projector gt Never try to care for the inside of the projector personally Doing is so dangerous gt Avoid wetting the projector or inserting liquids in the projector It could result in a fire an electric shock and or malfunction to the projector e Do not put anything containing water cleaners or chemicals near the projector e Do not use aerosols or sprays ACAUTION b Please take right care of the projector according to the following Incorrect care could cause not only an injury but adve
72. rse influence such as discoloration peeling paint etc gt Do not use cleaners or chemicals other than those specified in this manual gt Do not polish or wipe with hard objects 62 Mroubleshooting If an abnormal operation should occur stop using the projector immediately Otherwise if a problem occurs with the projector the following checks and measures are recommended before requesting repair If this does not resolve the problem please contact your dealer or service company They will tell you what warranty condition is applied Related messages When some message appears check and cope with it according to the following table Although these messages will be automatically disappeared around several minutes it will be reappeared every time the power is turned on Message Description There is no input signal Please confirm the signal input connection and the status of the signal source C3 COMPUTER IN NO INPUT IS DETECTED The horizontal or vertical freguency of the input signal is ere ISK not within the specified range SYNC IS OUT OF RANGE i a 123kHz 123Hz Please confirm the specs for your projector or the signal source specs MO COMPUTER IN An improper signal is input INFNEENIESI Please confirm the specs for your projector or the signal source specs The internal temperature is rising Please turn the power off and allow the projector to cool down at least 20 minutes After having con
73. ry repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed FP MyScreen PASSWORD NOTE NEW PASSWORD 0000 continued on next page 53 ltem Deseription O U O PIN LOCK is a function which prevents the projector from being used unless a registered Code is input 1 Turning on the PIN LOCK 1 1 Use the A Y buttons on the SECURITY menu SENAK to select PIN LOCK and press the button or ON the ENTER button to display the PIN LOCK on off menu 1 2 Use the A V buttons on the PIN LOCK on PIN BOX off menu to select ON and the Enter PIN Enter PIN Code Code box will be displayed 1 3 Input a 4 part PIN code using the A W lt gt COMPUTER or INPUT button The PIN Code again box will appear Reenter TES the same PIN code This will complete the PIN MRE code registration e If there is no key input for about 55 seconds while the Enter PIN Code box or the PIN Code again box is displayed the menu will close If necessary repeat the process from 1 1 Afterwards anytime the projector is restarted after AC power is turned off the Enter PIN Code box will be displayed Enter the regi
74. s a possibility that the interior portion has become overcooled Please use the unit within the usage temperature parameters 5 C to 35 C After the treatment reset the power to ON Lighting Alternative In Green blinking in Red NOTE When the interior portion has become overheated for safety purposes the projector is automatically shut down and the indicator lamps may also be turned off In such a case disconnect the power cord and wait at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again Resetting all settings When it is hard to correct some wrong settings the FACTORY RESET function of SERVICE item in OPTION menu 451 can reset all settings except LANGUAGE FILTER TIME LAMP TIME FILTER MESSAGE and SECURITY settings and etc to the factory default 65 Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect check and cope with it according to the following table Phenomenon Cases not involving a machine defect Reference page Power does not come on Neither sounds nor pictures are outputted The electrical power cord is not plugged in Correctly connect the power cord The main power source has been interrupted during operation such as by a power outage blackout etc Please disconnect the power plug
75. splays and it does not constitute or imply a machine defect e The projector may make a rattling sound when tilted moved or shaken since a flap to control the air flow inside of the projector has moved Be aware that this is not a failure or malfunction 69 Specifications Specifications Item Specification Product name Liquid crystal projector 786 432 pixels 1024 horizontal x 768 vertical 200 W UHR Powersupply AC 100 120 V 2 9 A AC 220 240 V 1 4 A AC 100 120 V 290 W AC 220 240 V 270 W 5 35 C Operating 306 W x 77 H x 221 D mm i a including protruding parts Please refer to the following figure approx approx 2 2kg oo 2 approx 2 2kg oo Computer input port COMPUTER IN D sub 15 pin mini x1 Computer output port MONITOR OUT D sub 15 pin mini x1 HDMI input port HDMI connector x1 Video input port Ports mini DIN 4 pin x1 Audio input output port AUDIO IN1 Stereo mini x1 AUDIO IN2 Stereo mini x1 AUDIO OUT Stereo mini x1 Others CONTROL D sub 9 pin x1 Lamp DT01141 Filter set UX36761 Mounting accessary HAS X1 Bracket for ceiling mount Optional parts HAS 204L Fixing adaptor for low ceilings HAS 304H Fixing adaptor for high ceilings Laser remote control RC R008 For more information please consult your dealer 70 Specifications continued AA 1 ARMY Y JA 7 UU SS unit mm 71
76. stered PIN code The projector can be used after entering the registered PIN code If an incorrect PIN code is input the Enter PIN code box will be displayed again RETURN EXIT ORCHORG ra CTTU ORORORG S675 PIN LOCK If an incorrect PIN Code is input 3 times the projector will turn off Afterwards the projector will turn off every time an incorrect PIN code is input The projector will also turn off if there is no key input for about 5 minutes while the Enter PIN code box is displayed This function will activate only when the projector is started after AC power is turned off e Please do not forget your PIN code 2 Turning off the PIN LOCK 2 1 Follow the procedure in 1 1 to display the PIN LOCK on off menu 2 2 Use the A Y buttons to select OFF and the Enter PIN Code box will be displayed Enter the registered PIN code to turn the PIN LOCK function off If an incorrect PIN Code is input 3 times the menu will close 3 If you have forgotten your PIN Code 3 1 While the Enter PIN Code box is displayed press and hold the RESET button for three seconds or press and hold the INPUT button for 3 seconds while pressing the button on the projector The 10 digit Inquiring Code will be displayed e If there is no key input for about 5 minutes Fa AROS while the Inquiring Code is displayed the 01 2345 6789 projector will turn off 3 2 Contact your dealer with the 10 digit Inquiring Code Your PIN Code will be sent after you
77. t is found the projector will stop searching and display the image If no signal is found the projector will return to the state selected before the operation COMPUTER IN gt HDMI VIDEO S VIDEO e While ON is selected for AUTO SEARCH item in OPTION menu 447 the projector will keep checking the ports in above order repeatedly till an input signal is detected Selecting an aspect ratio 1 Press ASPECT button on the remote control Each time you press the button the projector switches the mode for aspect ratio in turn ASPECT button O For a computer signal NORMAL gt 4 3 gt 16 9 gt 16 10 as O For an HDMI signal NORMAL gt 4 3 gt 16 9 gt 16 10 gt 14 9 We o d O For a video signal s video signal or component video signal 4 3 gt 16 9 gt 14 9 E O For no signal 4 3 fixed e ASPECT button does not work when no proper signal is inputted e NORMAL mode keeps the original aspect ratio setting Adjusting the projector s elevator When the place to put the projector is slightly uneven to the left or right use the elevator feet to place the projector horizontally Es Using the feet can also tilt the projector in order to project at a SES a suitable angle to the screen elevating the front side of the 12 J projector within 12 degrees This projector has 2 elevator feet and 2 elevator knobs An elevator foot is adjustable while pulling up the elevator knob on the same side as it
78. ta tae orf 4 1 218 182 72 4 2 292 243 96 6 2 365 438 365 144 9 4 a type inch 30 0 8 eje m a s oe 2 S a e o o 5 Se O 0 9 E D D D gt O 00 o E m 9 A OB ES ES ISI DN MI wla jala iNo oN o r oND N IN gt w O N O Co Arrangement continued lt CPX8 CPX9 gt Screen size diagonal inch m C o O 60 80 90 0 1 1 1 1 2 2 2 3 3 5 6 T 8 0 3 ES 8 0 3 5 0 8 1 4 6 4 3 screen MO 6 OZ Ed D Projection distance Screen Screen Projection distance Screen Screen height height height height 0 7 29 o9 35 39 15 7 3 08 33 10 39 36 14 1 0 1 0 39 142 47 52 21 9 3 11 44 ts 53 49 19 1 o 1 3 49115 60 65 26 1 4 14 55 1 7 66 61 24 1 1 15 60 18 72 78 31 13 5 17 66 20 80 73 29 2 1 1 8 70 21 84 91 36 15 6 2 0 80 25 97 105 41 17 7 2 3 90 2 8 109 118 46 20 8 2 6 101 3 1 121 131 51 22 9 5 6 222 6 8 267 243 96 6 2 8 5 334 10 2 401 365 144 9 4 Arrangement continued AWARNING gt Place the projector in a stable horizontal position If the projector falls or is knocked over it could cause injury and or damage to the projector Using a damaged projector coul
79. the cursor button or ENTER button to OPTION 83 MONITOR OUT execute the item Then perform it according to the JEEP a following table COMPUTER IN 1024 x 768 60Hz tem Description O Selecting this item performs the Automatic keystone distortion correction Projector automatically corrects vertical keystone distortion due to the forward backward setup angle by itself This function will be executed only once when selected in the menu When the slant of the projector is changed execute this function again e The adjustable range of this function will vary among inputs For some input this function may not work well e When V INVERT or H amp V INVERT is selected to the MIRROR item in the SETUP menu if the projector screen is inclined or angled downward this function may not work correctly PO ESE CSTONE e When the zoom adjustment is set to the TELE telephoto focus this function may be excessive This function should be used when the zoom adjustment is set to the full WIDE wide angle focus whenever possible e When the projector is placed on the level about 47 this function may not work e When the projector is inclined to near 30 degree or over this function may not work well e This function will be unavailable when the Transition Detector is on 455 Using the lt gt buttons corrects the vertical keystone distortion Shrink the bottom of the image lt gt Shrink the top of the image KEYSTONE e T
80. the lt gt buttons adjusts the contrast CONIRASI Weak lt gt Strong Using the A W buttons switches the gamma mode DEFAULT 1 lt gt CUSTOM 1 lt gt DEFAULT 2 CUSTOM 2 lt gt DEFAULT 3 t t CUSTOM 6 CUSTOM 3 t t DEFAULT 6 lt gt CUSTOM 5 lt gt DEFAULT 5 amp CUSTOM 4 amp DEFAULT 4 To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the P button or the ENTER button displays a dialog to aid you in adjusting the mode ATTIE 7 This function is useful when you want to change the brightness of particular tones Choose an item using the lt gt buttons So E and adjust the level using the A W buttons GAMMA You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button a Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps a AAA es Ramp Gray scale of 15 steps a o a o The eight equalizing bars correspond to eight tone levels of the test pattern Gray scale of 9 steps except the darkest in the left end If you want to adjust the 2nd tone from left end on the test pattern use the equalizing adjustment bar 1 The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar e Lines or other noise might appear on the screen when this function is operated but it nt is not a malfunction continued on next page 28 ltem Deserption O
81. ton on the remote control to exit magnification e The MAGNIFY dialog will automatically disappear in several seconds with no operation The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared e While the MAGNIFY dialog is displayed press the MAGNIFY ON button to switch the dialog between magnifying area shifting with the triangles and magnification ratio adjustment with the magnifying glass icon e The magnification is automatically disabled when the displaying signal or its display condition is changed e While the magnification is active the keystone distortion condition may vary It will be restored when the magnification is disabled e Some horizontal stripes might be visible on the image while magnification is active 22 Temporarily freezing the screen FREEZE button Press the FREEZE button on the remote control The FREEZE indication will appear on the screen however the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu H143 and the projector will go into the FREEZE mode which the picture is frozen To exit the FREEZE mode and restore the screen to normal press the FREEZE button again e The projector automatically exits from the FREEZE mode when some control buttons are pressed e f the projector continues projecting a still image for a long time the LCD panel might possibly be burned in Do not leave the
82. tton to assign a function from BLANK MY BUTTON 1 and MY BUTTON 2 Use the A buttons to select the desired button on the menu and press the button 2 Then using the A V gt buttons sets one of the following functions to the chosen button Press the ENTER or INPUT button to save the setting e COMPUTER IN Sets port to COMPUTER IN e HDMI Selects input from HDMI port e S VIDEO Sets port to S VIDEO e VIDEO Sets port to VIDEO e INFORMATION Displays the INPUT_INFORMATION E251 or the SYSTEM_INFORMATION or nothing e AUTO KEYSTONE Performs automatic keystone distortion correction 4138 e MY MEMORY Loads one of adjustment data stored E230 When more than one data are saved the adjustment MY BUTTON changes every time the MY BUTTON is pressed When no data is saved in memory the dialog No saved data appears When the current adjustment is not ey cayenne saved to memory the dialog as shown in aia a the right appears If you want to keep the current adjustment please press the gt button to exit Otherwise loading a data will overwrite the current adjusted condition e PICTURE MODE Changes the PICTURE MODE E126 e FILTER RESET Displays the filter time reset confirmation dialogue 148 e TEMPLATE Makes the template pattern selected to the TEMPLATE item 45 appear or disappear e AV MUTE Turns the picture and audio on off e RESOLUTION Turns on off the RESOLUTION dialog 437 e ECO MODE Turns
83. xcept get commands is transmitted to the CONTROL port during the corresponding time projector will not be turned off Please refer to the section Turning off the power E114 The lamp time is the usage time of the lamp counted after the last resetting It is shown in the OPTION menu Pressing the RESET button on the remote control or the gt button of the projector displays a dialog To reset the lamp time select the OK using the P button CANCEL gt OK e Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp e For the lamp replacement see the section Replacing the lamp O58 59 The filter time is the usage time of the air filter counted after the last resetting It is shown in the OPTION menu Pressing the RESET button on the remote control or the gt button of the projector displays a dialog To reset the filter time select the OK using the P button CANCEL gt OK e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e For the air filter cleaning see the section Cleaning and replacing the air filter L460 61 continued on next page LAMP TIME FILTER TIME 48 ltem Deserption O You can use this item to assign one of the following functions to the BLANK button on the control panel L5 and the MY BUTTON 1 2 buttons on the remote control L6 1 Choose a bu
84. xtra line may appear at outside of the picture e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN in IMAGE menu 437 setting It is not possible to adjust when OVER SCAN is set to 10 e If POSITION button is pressed when a menu is indicated on screen the displayed picture does not move its position but the menu does e This function is unavailable for a signal from the HDMI port 20 Correcting the keystone distortions KEYSTONE button Press KEYSTONE button on the remote KEYSTONE O control A dialog will appear on the screen to D MANA aid you in correcting the distortion 2 Use the A Y cursor buttons to select AUTO or MANUAL operation and press the P button to perform the following 1 AUTO executes automatic vertical keystone correction 2 MANUAL displays a dialog for keystone correction KEYSTONE_MANUAL o Use the lt gt buttons for adjustment Y To close the dialog and complete this operation press KEYSTONE button again Even if you do not do anything the dialog will automatically disappear after a few seconds e The adjustable range of this function will vary among inputs For some input this function may not work well e When V INVERT or H amp V INVERT is selected to the MIRROR item in the SETUP menu if the projector screen is inclined or angled downward automatic vertical keystone correction may not work correctly

Download Pdf Manuals

Related Search

Related Contents

  OBDII (CARB) 取扱説明書  【`97~`07 BALーUS 耳 /GSX250FX】  HANDLEIDING - Treniruokliai.lt  取扱説明書 - TOEX  DataTrust Offsite Backup User Guide  SYBA SD-PEX30009  Sony SRS-A47 User's Manual  Keithley KPCI-PIO32IOA / KPCI-PDISO8A Manual  VSP 516S  

Copyright © All rights reserved. Failed to retrieve file