iLuv Vibro Classic
Contents
1. Heed all warnings Follow all instrtuctions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions ANA UN BWHN Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades anda third grounding prong The wide blade or the third prong are provided for your safety If the 11 iLuv USER SAFETY GUIDE IMPORTANT SAFETY INSTRUCTIONS continued provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing i2. display current playing mode B z SS oie oe Jm j Jm j a a OFF Press and hold POWER MODE AL OFF for three 3 seconds to turn off the unit LCD will display current time only ca a Back Up battery Insert two 2 AAA batteries When there s a power outage clock will still be displayed In this status the unit will not fully function When the inserted battery is low low battery indicator will display on the LCD Back Up Function If the AC supply is interrupted the clock display and preset radio stations will go off and all settings will be canceled To back up the clock and preset stations insert two AAA size batteries not supplied in the battery compartment in the base of the unit The back up battery does not provide operation of your iPod Note Always use Alkaline batteries and remove the batteries when the unit is not to be used for an extended period of time 5 iLuv OPERATIONAL INSTRUCTION Setting the Clock 1 In standby mode press and hold TIME SET on the top panel for 3sec to enter Clock set mode 2 The hour digit will begin flashing Press m4 or to set the hour Press TIME SET to confirm 3 When hour is confirmed minute digit will begin flashing Press m4 or to set the minute Press TIME SET to confirm Setting the Alarm User is able to set two distinct alarms on the unit Press or to enable Alarm 1 or Alarm 2 When Alarm 1 or
3. Shaker is not connected it will become the buzzer alarm To set Alarm 2 press and hold the button and repeat steps 1 to 4 above iMM153 V10M10_IM_EN_02022011 iLuv 6 OPERATIONAL INSTRUCTIONS 7 iLuv Using the Snooze Function After Alarm is ON press SNOOZE DIMMER button to temporarily deactivate the alarm which will activate again after 7 minutes Press POWER MODE AL OFF to switch off the Alarm Using the Sleep Function Press SLEEP MEMORY and the sleep indication will turn ON Press the SLEEP button again to change and select from 15 to 30 60 90 120 or OFF Selectinig OFF disables the sleep function While the sleep function is activated press SLEEP MEMORY once and the remaining sleep time will be shown Press SLEEP MEMORY again to select other sleep times IMPORTANT 1 Occasionally files on your iPod may become corrupted This may cause erratic behavior with your iLuv products Apple recommends visiting their website www apple com to obtain instructions on resetting or restoring your iPod to factory settings It is imperative to your iPod and the built in universal dock that you use the correct dock adapter for your iPod and that the dock adapter fits appropriately into the built in universal dock Ignoring these rules can cause severe damage to your iPod Please refer to the section Installing the Dock Adapter to install the dock adapter properly before operating iMM15
4. fact be harmful To guard against this BEFORE YOUR HEARING ADAPTS set the volume at a low level and slowly increase the volume level until you can hear comfortably and clearly without distortion Damage to your hearing is accumulative and is irreversible Any ringing or discomfort in the ears indicates that the volume is too loud Once you have established a comfortable listening level DO NOT INCREASE THE VOLUME LEVEL FURTHER In the use of headphones please take more attention Hearing experts say that listening to a loud music can damage your hearing especially when listening to music with headphones USER SAFETY GUIDE IC NOTICE TO A USER IN CANADA Since digital circuitry may cause interference to other radio or television tuners nearby switch this unit off when not in use or move it away from the affected radio television tuner NOTE This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment do
5. 3 with your iPod Listening to your iPod Ik AunfRWN Press POWER MODE AL OFF to Power on the unit To select iPod mode press POWER MODE AL OFF again until the iPod icon is shown on the top of display While the iPod mode is on insert your iPod to the universal dock and press i PRESET to play Press II PRESET to control the play and pause functions Press ma or to select previous or next song Press and hold m4 or gt to rewind or fast forward currently playing music from iPod Press the lt to adjust the VOLUME level of this unit as desired OPERATIONAL INSTRUCTIONS Listening to the Radio Note Unwind and extend antenna to its full length It may be necessary to adjust the direction of this wire antenna until you find the position that provides the best reception for your favorite FM stations 1 Press POWER MODE AL OFF to Power on the unit To select radio press POWER MODE AL OFF until FM icon is shown on the top of display 2 FM radio frequency will show on the display 3 Tune to the desired frequency as follows a Automatic Tuning i Press and hold te or for three 3 seconds Auto tuning will start ii The tuner will search the frequency for the next strong station and stop on that station Repeat this procedure until the tuner stops on your desired station b Manual Tuning Repeatedly press m4 or until the frequency of the desired station appears on the displa
6. Alarm 2 or both Alarm 1 and Alarm 2 is enabled icon will be displayed on the LCD To disable Press or again Icon will disappear 1 Press and hold the button for three 3 sec and the hour digit will begin flashing Press lt or to set the hour Press to confirm 2 Minute digit will begin flashing Press m4 or to set the minute Press to confirm 3 Wake up mode display will begin flashing Press m4 or to select from below Wake to FM radio Pre tune your desired radio channel in FM radio mode before setting the wake up function Wake to your iPod Wake to Buzzer Wake to Shaker Make sure the Shaker is plugged in into SHAKER behind the unit Notes Shaker can be combined with other wake to modes When FM radio iPod or Buzzer is selected the iMM153 will ask whether or not to enable shaker When asked press m4 or to choose On or Off then press to confirm On or OFF on LCD screen refers to the shaker funtion not the alarm itself 4 When the wake up mode is selected the Alarm indicator appears on the display Notes For Radio wake up and iPod playback user must set desired volume for alarm a 400 B 2 00 a The iMM153 will remember last volume m m setting to play music for alarm If the wake up Nom mode is set to iPod playback with no iPod z mn z _ connected it will become the buzzer alarm If the wake up mode is set to Shaker but the
7. distorted a b The volume level on the connected device or the iMM153 is set too high Decrease the volume until the distortion has disappeared The source sound is distorted If the original sound source MP3 on your iPod is poor quality the distortion and noises are easily noticed with high power speakers Try a different audio source like a music CD to test iMM153 V10M10_IM_EN_02022011 iLuv 10 USER SAFETY GUIDE TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magni tude to constitute a risk of electric shock to people CAUTION WARNING To reduce the risk of electric shock do not remove cover or back RISK OF ELECTRIC No user servic able parts inside Refer servicing to qualified service personnel SHOCK DO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance servicing instruction in the literature accompanying the apliance IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions
8. erference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help FCC RULES This device complies with Part 15 of the FCC Rules Operation is subject to the condition that this device does not cause harmful interference Note Do not make changes or modify the device in any way Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment iMM153 V10M10_IM_EN_02022011 iLuv 14 ER SAFETY GUIDE 15 iLuv IMPORTANT NOTES ON HEARING Your hearing is very important to you and to us so please take care when operating this equipment We strongly recommend you to follow the guideline below in order to prevent possible damage or loss of hearing If you continuously listen to the loud sounds your hearing will adapt to continuous loud sounds and will give you the impression that the volume has been reduced What seems normal to you may in
9. es cause harmful interference to radio or television operation which can be determined by turning the equipment off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus Mains plug is used as the disconnect device It shall remain readily operable and should not be obstructed during intended use To be completely disconnected the apparatus from supply mains the mains plug of the apparatus shall be disconnected from the mains socket outlet completely iMM153 V10M10_IM_EN_02022011 iLuv 16 USER SAFETY GUIDE IMPORTANT NOTICE TO UK USERS Electrical Safety Read these electrical safety instructions carefully before connecting the adapter to the mains supply This clock radio is supplied with a mains adapter which has been designed for indoor use only The mains adapter is a sealed unit There are no user serviceable parts inside and it does not require any electrical adjustments Do not attempt to open the mains adapter If t
10. function Try another outlet Your iPod does not fit into the built in universal dock a b The installed dock adapter is not the correct one Check whether a correct dock adapter is installed There might be some obstructions on the dock Check whether there are any obstructions on the connector and on the dock If everything is secured place your iPod back into the dock It does not recognize your iPod when docked a b Your iPod may not be properly docked Take your iPod out of the dock and remove any obstructions on the connector from the dock and on your iPod Place your iPod back into the dock Your iPod is frozen or locked up Check whether your iPod operates correctly before placing it back into the dock Please refer to the owner s instruction manual of your iPod The software of your iPod is outdated Upgrade the software on your iPod For the details on how to upgrade the software on your iPod please visit the Apple website http www apple com Your iPod is not charged even though it is in the dock a b Your iPod might not be properly docked Take your iPod out of the dock and remove any obstructions on the connector from the dock and on your iPod Place your iPod back into the dock Your iPod is frozen or locked up Check whether your iPod operates correctly before placing it back into the dock Please refer to the owner s instruction manual of your iPod When playing music the sound gets
11. he mains adapter becomes damaged or fails to operate your clock radio it must be replaced or disposed of in a safe and environmentally protective way The mains adapter is designed to operate on 230VAC 50Hz supply Connecting it to any other power sources may damage the adapter and the clock radio ADDITIONAL IMPORTANT INSTRUCTIONS Place the apparatus with some distances from the nearby objects or walls for sufficient ventilations The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc No naked flame sources such as lighted candles should be placed on the apparatus Dispose of used batteries properly Follow the local regulation for the battery disposal Use this apparatus in the moderate climates It is recommended not to use this apparatus such in a lighting storm 17 iLuv SPECIFICATIONS Radio frequency FM 87 5MHz 108MHz Audio output 2 5Wams L 2 5Wrms R Total 5Wrms 10Weeak 100WemPo Connectivity 3 5mm aux in jack Power jack FM antenna Shaker jack Power Requirement AC100V 240V 60 50Hz Adapter Batteries for time setting backup 2 x 1 5V AAA batteries not included Power consumption lt 10W Dimensions W x H x D 8 4 x 3 x 4 3 213mm x 76mm x 109mm Unit weight 1lbs 0 45kg iMM153 V10M10_IM_EN_02022011 iLuv 18
12. iLuv THANK YOU FOR YOUR PURCHASE Visit our website at www i Luv com 2011 www i Luv com iLuv is a trademark of iLuv Creative Technology iPod is a trademark of Apple Inc registered in the U S and other countries All logos and brands are property of their respective owners iPod not included in this package Features and specifications are subject to change without prior notification 2011 iLuv Creative Technology All rights reserved No portion of this printed material or product enclosed herewith including design shape or graphics may be reproduced or transmitted in any form without the expressed written consent of iLuv Creative Technology by any means electronic or mechanical including photocopying recording or use of an information storage and retrieval system Any unauthorized distribution or reproduction of this printed mate rial or product or any portion thereof will be prosecuted to the fullest possible extent of the law Designed in New York USA Printed in China English iLuv Model iMM153 Instruction Manual Desktop Alarm Clock with Bed Shaker for your iPod INTRODUCTION Congratulations on your purchase of the new iMM153 your iPod Please keep this manual for future reference Desktop Alarm Clock with Bed Shaker for your iPod Built in speakers allow you to hear your music with depth and clarity Large display easy to read Auxiliary line input for any audio devices with 3 5mm jack LCD dimme
13. laced in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 17 The MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable iMM153 V10M10_IM_EN_02022011 iLuv 12 USER SAFETY GUIDE IMPORTANT SAFETY INSTRUCTIONS continued CLEANING Always disconnect unit from power supply before attempting to clean it Use soft clothmoistened with soapy water and wipe gently Do not use solvents or abrasive materials YOU CAN HELP TO PROTECT THE ENVIRONMENT X Please remember to respect the local regulations Hand in the non working electri Ea cal equipment to an appropriate waste disposal center FOR USED BATTERIES Disposed of the used batteries properly Please follow the local regulations for the battery disposal 13 iLuv USER SAFETY GUIDE FCC NOTICE TO A USER IN USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that int
14. nction will show on the top of the display 2 Turn your auxiliary source ON and operate it as usual The sound from the auxiliary source will be heard through the speakers of the iMM153 3 Adjust the VOLUME level controls of this unit and the auxiliary sound source as desired Note Connection cables are not included with this unit Adjusting the Brightness of the LCD Screen Press SNOOZE DIMMER to adjust the brightness of the display It will return to normal after three 3 seconds Brightness setting ranges from OFF to 9 Resetting the Unit If the system does not respond there may have been a power surge that triggered the internal computer to shut down automatically If this occurs disconnect the main power and connect it again after approximately one minute Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzine thinner or similar materials can damage the surface of the unit 9 iLuv TROUBLESHOOTING GUIDE The stereo speaker system iMM153 does not turn on a b The AC adapter may not be connected properly Check the connection The wall outlet may not
15. r level control 10 steps Features iPod Enjoy rich sound from your iPod Plays and charges your iPod Integrated universal dock for your iPod Digital Dual Alarm Clock Digital clock display with dual alarm clock Bed shaker vibrates a bed or pillow to wake up the heaviest sleepers Wake to iPod FM radio buzzer or bed shaker Sleep iPod FM radio Radio FM stereo radio PLL digital tuning technology Programmable presets for 10 radio stations What s included AC adapter Bed shaker jPod touch 1st 2nd 3rd and 4th generation iPod nano 1st 2nd 3rd 4th 5th and 6th generation iPod classic iPod with video iPod 4th generation iPod mini 1 iLuv TABLE OF CONTENTS Getting Started Installing the AC Adapter Protect your Furniture Installing the Dock Adapter Location of Controls on the Main Unit Power On Off Backup Battery Backup Function uuna www Operational Instructions Setting the Clock Setting the Alarm Using the Snooze Function Using the Sleep Function Listening to your iPod Listening to the Radio Charging your iPod AUX In Adjusting the Brightness of the LCD Screen Resetting the Unit Maintenance O OOOO ONNNOOQ Troubleshooting Guide 1 User Safety Guide 11 Specifications 18 iMM153 V10M10_IM_EN_02022011 iLuv 2 GETTING STARTED Installing the AC Adapter Locate the AC adapter jack on the back of the uni
16. s required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug 16 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be p
17. t Insert the AC adapter cable into the jack and plug into the wall outlet Protect your Furniture This model is equipped with foam feet to prevent the product from moving when you operate the controls Installing the Dock Adapter 1 How to insert a dock adapter a Please use dock adapter that came with your iPod b Using the correct dock adapter ensures the proper fit for your iPod c Gently push the dock adapter down into the universal dock d Carefully place your iPod into the universal dock Your iPod must not be in a case or Skin 2 How to remove the dock adapter Remove your iPod first then carefully remove the dock adapter 3 iLuv GETTING STARTED Location of Controls on the Main Unit 1 iPod dock 10 VOLUME UP lt button 2 SLEEP MEMORY button 11 PLAY PAUSE gt Il PRESET button 3 POWER AL OFF MODE button 12 FAST FORWARD gt button 4 Alarm 1 button 13 VOLUME DOWN button 5 TIME SET button 14 FAST BACKWARD m4 button 6 Alarm 2 button 15 SNOOZE DIMMER button 7 LCD screen 16 BED SHAKER jack 8 AUXIN jack 17 FM ANT 9 POWER jack iMM153 V10M10_IM_EN_02022011 iLuv 4 GETTING STARTED Power On Connect AC power adapter to the unit Then plug into AC wall outlet Clock will appear on LCD Press POWER MODE AL OFF to turn on the unit Power indication LED will light and LCD will
18. y After entering the radio mode for about 3 seconds the display will show the time mode again Press TIME SET again to show the radio frequency 4 Preset FM stations in the tuner memory This unit includes a 10 station preset memory Store up to 10 FM stations in the tuner memory for immediate recall The procedure for storing stations in memory is as follows a Preset FM channel i Follow instructions above to select the first station you wish to memorize and the FM frequency will show on the display For example FM 91 8 MHz ii Press and hold SLEEP MEMORY the preset channel number P 1 begins flashing on the display iii Press 1 PRESET to select preset channel P 1 to P 10 iv Press SLEEP MEMORY to confirm v Repeat step i to iv to until you have memorized up to 10 stations Press 1 PRESET to listen to preset FM channel P 1 to P 10 at FM radio mode Note The saved preset station will be lost if the AC Power is interrupted and the backup battery is not inserted iMM153 V10M10_IM_EN_02022011 iLuv 8 OPERATIONAL INSTRUCTIONS Charging your iPod If your iPod is connected to the unit it will charge automatically AUX In Connect the Audio Output jacks of your auxiliary sound source MP3 player CD player Laptop TV etc to the AUX IN jack on the back panel of the unit The auxiliary function will only activate when the aux in jack is fitted with connection cable 1 Press POWER MODE AL OFF to select AUX fu
Download Pdf Manuals
Related Search