DeLonghi TRSW 0920
Contents
1. 3 Check that neither the heater nor the power cable has been damaged in any way during transportation 4 Do not operate the heater if damaged 5 Your heater is suitable for either freestanding or wall mounting usage Make sure that no pieces of polystyrene or other packaging materi al have been left between the elements of the appliance It may be necessary to use a vacuum cleaner to help eliminate the small pieces Fitting the castors Remove the castors wheels and assemblies from the polystyrene packaging In the unlikely event that there are any parts missing please contact our customer services department on 0845 600 6845 who will send you the part by return Insert the castors into the pins of the feet and push them all the way in until a click can be heard figl Make sure that they are in tightly by pulling the wheels gently Attach the castor assembly into the base of the control panel by inserting the guiding ridges between the control panel and the first element and between the end panel and the last element insert the location lug into its housing and lock the castor assembly to the product by inserting the eye screw and screwing it in tightly figl Finally turn the heater over to its upright position ensuring you do not damage the wheels eG DIL fig A VOTEN Stretto Living innovation Installation wall mounting The wall mounting kit should contain 2x Upper brackets A x Lower brackets B 52. nstructions DeLonghi STRETTO Please retain these instructions for future reference Living innovation DeLonghi Stretto Living innovation Thank you for choosing this De Longhi heater To get the very best out of your new heater please read these instruc tions before using it This will ensure that you gain optimum results and use the appliance safely Warnings Do not use the heater in a bathroom or in the vicinity of bath tubs wash basins showers or swimming pools Never use the heater to dry laundry Never rest the power cable on the heater s elements while it is hot Only use the heater in an upright position The heater must be positioned at least 50cm from furniture or other objects If the supply cord is damaged it must be replaced by the manufac turer or its service agent in order to in order to avoid a hazard It is normal for the heater to make crackling noises during its first use or if it has not been used for a long time The body of the heater is filled with an exact quantity of oil If repairs are necessary which call for the opening of the heater they must be done only by the manufacturer or an authorised service centre In the unlikely event of oil leakage contact the manufacturer or an authorised service centre Do not use this appliance in rooms which have a floor area small er than 4m as this may lead to overheating The heater must never be placed immediately under a fixe
3. d mains socket When scrapping the appliance respect legislation on the disposal of oil The use of an extension lead is not recommended as overheating of the extension lead may occur during the operation of the heater As with any electrical appliance whilst the instructions aim to cover as many eventualities as possible caution and common sense should be applied when operating your appliance particu larly in the vicinity of young children The appliance is fitted with a safety device which will switch it off in case of accidental overheating To reset contact an authorised service centre any circumstances cover the appliances during operation X WARNING In order to avoid overheating never under Important information for correct disposal of the product in accordance with EC Directive 2002 96 EC At the end of its working life the product must not be disposed of as urban waste It must be taken to a special local authority dif ferentiated waste collection centre or to a dealer providing this ser muay Vice Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be reco vered to obtain significant savings in energy and resources As a reminder of the need to dispose of household appliances separately the product is marked with a crossed out wheeled dustbin Electrical requirements Befo
4. first time On using the appliance for the first time we advise that you turn it on to the maximum power setting for up to 8 hours This is to eliminate the heater s new odour During this time ensure that the room is well ventilated Operation and use Turning the appliance on Insert the plug into the mains socket and switch on Turn the thermostat dial clockwise to its highest setting The heater has 3 heat settings Eco night time min power Press the upper switch the red Eco night time light on the switch will come on Medium power Press the lower switch the red light on the switch will come on Maximum power Press both switches the red lights on both switches will come on To turn the appliance off press both switches on the 0 position so the red lights are off and unplug at the mains We suggest that for night time background heat or on days when tem peratures are not particularly cold select minimum output to optimise savings On energy consumption Adjusting the thermostat When the room has reached the desired temperature turn the thermo stat dial slowly in an anti clockwise direction until you hear a click This temperature will be regulated automatically and kept constant by the thermostat Medium power Frost protection function Turn the thermostat dial fully anti clockwise so the is showing Press only the lower switch on When set
5. in this way the appliance will switch on automatically only if the room temperature falls below 5 C to prevent freezing at minimum energy consumption Cleaning and maintenance The heater should not require any maintenance However before attempting to clean the heater unplug from the mains and wait for it to cool this should take around 30 minutes It is sufficient to remove external dust with a soft dry cloth Never use abrasive Maximum power powders or solvents If necessary remove concentrated areas of dirt with a vacuum cleaner Service and Customer Care If the cord is damaged it must for safety reasons be repaired by De Longhi or an authorised De Longhi service centre Please refer to the enclosed guarantee leaflet for service and assistance details 7 z Sirera DeLonghi Living innovation 5706002300 10 07
6. oured brown must be connected to the terminal which is marked with the letter L or coloured red When wiring the plug ensure that all strands of wire are securely retained in each terminal Do not forget to tighten the mains lead clamp on the plug If your electricity supply point has only two pin socket out lets or if you are in doubt consult a qualified electrician Should the mains lead ever require replacement it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size After replacement of a fuse in the plug the fuse cover must be refitted If the fuse cover is lost the plug must not be used until a replacement cover is obtained The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug Always state this colour when ordering a replacement fuse cover Only I3amp replacement fuses which are asta approved to B S 1362 should be fitted This appliance conforms to the Norms EN 55014 regarding the sup pression of radio interference Warning this appliance must be earthed Green and Yellow to Earth 13 amp Fuse Brown to Live Cord Clamp er DeLonghi Living innovation General instructions Remove the heater from the packaging 2 Turn the heater upside down and rest on the polystyrene
7. re using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home if you are in any doubt about your supply contact your local electricity company The flexible mains lead is supplied connected to a B S 1363 fused plug having a fuse of 13 amp capacity Should this plug not fit the socket out lets in your home it should be cut off and replaced with a suitable plug following the procedure outlined below Note Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket with the obvious consequent danger N B We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use important the wires in the mains lead fitted to this appliance are coloured in accordance with the following code GREEN AND YELLOW EARTH BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol L or coloured green or green and yellow The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is col
8. t easier to locate brackets A into their respective slots in the rear of the radiator we suggest that you mark a pencil line on the back of the radiator adjacent to the top and bottom of each slot so that you can see more easily the slots position Once the brackets are located alongside the slots move the radiator to the side to engage in the slots and hang the radiator on the brackets This will now allow you to locate bracket B correctly 6 Mark the position for fixing the lower brackets B to the wall This bracket when fixed retains the base of the radiator prevent ing removal 7 Fit the radiator to the 2 brackets A fig 5 Insert bracket B in the middle of the radiator base as shown in figure 5 Fix the bracket B to the pre drilled hole Your radiator is now wall mounted WARNING Do not use your heater in a bathroom fig 5 Electrical connection Before plugging the appliance into the mains check that your supply voltage is the same as that shown on the rating plate of the appliance If using more than one appliance at a time it is important to ensure that the ring main is adequate to cope with the power requirements It is important to ensure that the socket is adequately earthed This appliance complies with EEC directive 89 336 regarding electromagnetic compatibility 6 DeLonghi Stretto Living innovation Instruction for use Using for the
9. x screws Select position for locating the heater ensuring that a It is not located directly below a power socket outlet b The plug and power outlet can be easily reached after installation c No electric cables or other tubes could be damaged d Keep away from curtains or inflammable materials Also Ceiling Walls furnishings note the minimum distances indicated in the figure 2 Fig 2 Floor Important Before drilling into any wall ensure no electrical cables are present Minimum distances in the area especially hidden in the wall if in doubt consult a qual from surrounding ified electrician walls furnishings 2 Following carefully the dimensions as indicated below the dis tance depends on which model you have purchased mark dis tance D on your wall Model o 3 Line up the centre of the holes of the brackets A with the marked lines indicated in fig 3 and 4 as the dashed lines ensur ing that the 2 brackets are level mark the holes to be drilled 4 For solid brick block walls use a 6 mm masonry drill and drill the 5 z Sirera DeLonghi Living innovation marked holes and then insert wall plugs to suit For plasterboard we suggest locating the studding and using No 6 woodscrews directly into the wood or special plasterboard fix ings For other wall types please seek specialist advice 5 Fix the brackets A onto the wall Then hang the radiator fig 5 To make i
Download Pdf Manuals
Related Search