Samsung MD260X6
Contents
1. Ei COLOR PICTURE MagicColor Red COLOR Green SIZE amp RPOS ON Blue Color Tone SETUP amp RESET an Color Effect NFORMATION Gamma Using the product MENU DESCRIPTION MagicColor Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics e lt Off gt Turns the lt MagicColor gt function off e lt Demo gt You can compare the pictures processed by lt MagicColor gt with the original pictures e lt Full gt Provides a clearer picture including areas corresponding to skin color e lt Intelligent gt Improves the chroma of pictures except for areas corresponding to skin color Red You can adjust the red color value of pictures according to your preference This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Green You can adjust the green color value of pictures according to your preference This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Blue You can adjust the blue color value of pictures according to your preference This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Color Tone You can set the color temperature according to your preference e lt Cool gt Sets the color tem2. 2 1 Package Contents e For instructions on how to assemble a 1 x3 or 2 x 3 video wall refer to the assembly guide provided with the product packaging e Unpack the product and check if all of the following contents have been included e Store the packaging box in case you need to move the Product later e If any items are missing contact your dealer e Contact a local dealer to purchase optional items Monitor CONTENTS Quick Setup Guide Product Warranty User Manual Power Cord i DVI Cable DP Cable Multi Control Pad Magnetic Rubber X 2 OPTIONAL PARTS D Sub Cable Installing the Product 2 1 2 2 Connecting the Cables for a 1 x 1 Video Wall The connecting part may differ depending on the product model 1 Connect the product to a PC depending on the video output supported by the PC e When the graphics card provides D Sub Analog output e Connect the RGB IN port of the product to the D Sub port of the PC with the D Sub cable e When the graphics card provides DVI Digital output e Connect the DVI IN port of the product to the DVI port of the PC with the DVI cable nee 2 Connect one end of the power cord to the POWER port of the Primary Monitor and connect the other end of the power cord to the 220V or 110V wall outlet The input voltage is switched automatically 2 2 Installing the Product S POWER S W Turns the product
3. 4 Installing the Software 4 1 Natural Color What is Natural Color This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the colors on the product with the colors of the printed pictures For more information refer to the online help of the software F1 The Natural Color is provided online You can download it from the website below and install http www samsung com us consumer learningresources monitor naturalcolorexpert pop_download html Installing the Software 4 1 4 2 MagicTune What is MagicTune MagicTune MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy to understand guidelines Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MagicTune setup program es If the pop up screen for the software installation does not appear on the main screen find and double click the MagicTune setup file on the CD ROM 3 Select the installation language and click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen f The software may not work properly if you do not restart the computer after the installation e The MagicTune icon may
4. Personalization Display settings Windows 7 Change the resolution by selecting Control Panel Appearance and Personalization Display Adjust reso lution For more information refer to the User Manual of the com puter or the graphics card How can use the power saving function Windows XP Configure it by selecting Control Panel Appearance and Themes Display Screen Saver Setting or configure it in the BIOS Setup of the computer Windows ME 2000 Configure it by selecting Control Panel Display Screen Saver Setting or Configure it in the BIOS Setup of the computer Windows Vista Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver You can also use the BIOS SETUP menu on the PC Windows 7 Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver You can also use the BIOS SETUP menu on the PC For more information refer to the Windows user manual for the computer 5 3 Troubleshooting 6 More Information 6 1 Specifications MODEL NAME MD230 MD230X3 MD230X6 LCD Panel Size 23 inch 58 cm Display area 509 76 mm H x 286 74 mm V 20 07 inch x 11 29 inch Pixel Pitch 0 2655 mm H x 0 2655 mm V 0 01 inch x 0 01 inch Synchronization Horizontal 30 81 kHz Vertical 56 60 Hz Display Color 16 7M Resolut
5. U S A 1 800 SAMSUNG 726 7864 http www samsung com CANADA 1 800 SAMSUNG 726 7864 http www samsung com MEXICO 01 800 SAMSUNG 726 7864 http www samsung com LATIN AMERICA ARGENTINA 0800 333 3733 http www samsung com BRAZIL 0800 124 421 http www samsung com 4004 0000 CHILE 800 SAMSUNG 726 7864 http www samsung com COLOMBIA 01 8000112112 http www samsung com COSTA RICA 0 800 507 7267 http www samsung com ECUADOR 1 800 10 7267 http www samsung com EL SALVADOR 800 6225 http www samsung com GUATEMALA 1 800 299 0013 http www samsung com HONDURAS 800 7919267 http www samsung com JAMAICA 1 800 234 7267 http www samsung com NICARAGUA 00 1800 5077267 http www samsung com PANAMA 800 7267 http www samsung com PUERTO RICO 1 800 682 3180 http www samsung com REP DOMINICA 1 800 751 2676 http www samsung com TRINIDAD 8 TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com VENEZUELA 0 800 100 5303 http www samsung com EUROPE AUSTRIA 0810 SAMSUNG 7267864 0 07 min http www samsung com BELGIUM 02 201 24 18 http www samsung com be Dutch http www samsung com be fr French CZECH 800 SAMSUNG 800 726786 http www samsung com Distributor pro eskou republiku samsung tt ceska organizacni slo ka Dasis Florenc bokolovska3541 7 180 00 Praha o DENMARK 70 70 19 70 http www samsung com EIRE 0818 717100 http www samsung com ESTONIA 800 72
6. If the maximum resolution is 1680 x 1050 the number of sub pixels is 1680 x 1050 x 3 5 292 000 1 2 Major Safety Precautions 1 3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign may result in a serious injury or Warning l A even a fatality Canon Failing to follow the precautions marked with this sign may result in a personal injury or A property damage Meaning of Signs S Do not perform ap Q Do not disassemble Q Do not touch ab Power Related Must be followed The power plug must be unplugged from the wall outlet Must be grounded to prevent electric shock The product image used in the following pictures for your reference may look different from the actual product A Warning Avoid using a damaged power cord or plug or a loose power outlet Otherwise it may result in electric shockor 83 7 fire O Avoid plugging in or unplugging the power supply with wet hands e Otherwise it may result in electric shock Make sure to connect the power cord to a grounded wall outlet for insulation class 1 equipment only e Otherwise it may result in electric shock or injury Keep the power cord and the product away from a heater O e Otherwise it may result in electric shock or fire Avoid connecting multiple electric appliances to a single wall outlet e
7. Source PC AV Mode Display Time L INFORMA TION CI PICTURE PICTURE Brightness Contrast sharpness SlZE8 POSITION Coarse SETUP amp RESET NFORMAT ION lt PC signals gt MagicBright PICTURE SIZE amp POSITION Brightness LOntrast sharpness SETUP amp RESET NFORMAT ION lt AV signals gt MagicBright MENU DESCRIPTION Brightness Controls the screen brightness This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt mode Contrast Controls the contrast of the pictures displayed on the screen This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt mode This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Sharpness Controls the clarity of details of pictures displayed on the screen This menu is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt mode This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode 3 5 Using the product MENU DESCRIPTION MagicBright Provides preset picture settings optimized for various user environments such as editing a document surfing the Internet playing games watching sports or movies and so on e Custom If the preset picture modes are not sufficient users can configure the lt brightness gt and lt Contrast gt directly using th
8. area on the screen horizontally This function is only available in lt Analog gt mode V Position Moves the position of the display area on the screen vertically This function is only available in lt Analog gt mode Image Size PC signals e lt Auto gt The picture is displayed at the aspect ratio of the input signal e lt Wide gt The picture is displayed in full screen regardless of the aspect ratio of the input signal NN o e If the resolution is set to the optimal resolution the aspect ratio does not change whether the sImage Size is set to lt Auto gt or lt Wide gt A signal not in the standard mode table is not supported AV signals e lt 4 3 gt Displays pictures at the 4 3 aspect ratio e lt 16 9 gt Displays pictures at the 16 9 aspect ratio e lt Screen Fit gt If a 720P 1080i or 1080P signal is input in DVI input mode the picture is displayed as is without truncation This can only be set when the external input is connected through DVI and lt PC AV Mode is set to lt AV gt Menu H Position You can adjust the horizontal position of the OSD Menu V Position You can adjust the vertical position of the OSD 7 SETUP amp RESET PICTURE Ressel Menu lransparency COLOR Language Of Timer On Off SIZE amp POSITION SETUP amp RESET Auto Source 4 fi i N i O li I A Y bi a a z MENU DESCRIPTION Reset Use this fu
9. holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product Major Safety Precautions Keep small accessories away from the children Take care when adjusting the angle of the a product or the height of the stand big e If your hand or finger is caught you may be injured e f the product is tilted excessively the product may fall and this may result in injury Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product e Straighten your back e Keep a distance of 45 50 cm from your eyes to the screen Look down at the screen and face the screen forwards e Adjust the angle of the product so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Keep your elbow at a right angle e Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart 1 3 Major Safety Precautions 2 Installing the Product
10. on and off e When the product is connected to a PC you can turn the product on and use it e When both the DVI lt Digital gt and D Sub lt Analog gt cables are connected you can select the input signal lt Digital Analog gt by pressing the J SOURCE button on the multi control pad Installing the Product 2 2 2 3 Connecting the Cables for a1 x 3 or 2 x 3 Video Wall e For instructions on how to assemble a 1 x 3 or 2 x 3 video wall refer to the assembly guide provided with the product packaging e To connect DP cables the PC must have DP ports e Connect the power cord and multi control pad to one of the installed monitors This monitor becomes the primary monitor e The cables don t have to be connected in a particular order but we recommend the procedure below Using the Video Wall as a Single Screen Using the Video Wall as Multiple Screens Specifying the Monitor Number 1 Using the Video Wall as a Single Screen 1 1 Connecting the DP Cables 2x3 13 Gh Primary Monitor 1 Connect the DP ports of the PC and all the installed monitors using DP cables 2 3 Installing the Product 1 2 Connecting the Multi Control Pad 1 Primary Monitor 1 Connect the multi control pad to the primary monitor using a USB cable 2 Connect the UP port on the primary monitor to the DOWN port on one of the adjacent monitors using a USB cable e Monitors have no function bu
11. optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel unlike for a CDT monitor Therefore the visual quality will be degraded if the optimal resolution is not set for the panel size It is recommended setting the resolution to the optimal resolution of the product If the signal from the PC is one of the following standard signal modes the screen is set automatically However if the signal from the PC is not one of the following signal modes a blank screen may be displayed or only the Power LED may be turned on Therefore configure it as follows referring to the User Manual of the graphics card DISPLAY MODE SECU aE Mind PIXEL CLOCK MHZ TING il Nai VESA 640 x 480 31 469 59 940 25 175 VESA 800 x 600 35 156 96 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 1024 x 768 48 363 60 004 65 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 Horizontal Frequency Vertical Frequency A panel must display the same picture on the screen tens of times every second so that humans can see the picture This frequency is called the vertical frequency The vertical
12. other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please sepa rate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of mate rial resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal 6 4 More Information
13. pad and check the input signal again Is the Not Optimum Mode message displayed on the screen This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product In this case set up the appropriate resolution and the fre quency for the product Is a blank screen displayed and does the power LED blink at a 1 second interval This occurs when the power saving function is running If you click the mouse or press any key the screen will be turned on Did you connect with a DVI cable If you connect the DVI cable when the PC has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC the screen may not be displayed because some graphics cards do not output the video signal In this case reboot the PC while the DVI cable is connected THE IMAGE IS TOO LIGHT OR TOO DARK Adjust the Brightness and Contrast Refer to the lt Brightness gt lt Contrast gt If lt MagicBright gt is set to lt Dynamic Contrast gt the display brightness can differ according to the input signal THE ON SCREEN ADJUSTMENT MENU OSD DOES NOT APPEAR Did you cancel the screen adjustment Check if the lt OSD Adjustment Lock gt function is set to Off THE COLOR IS WEIRD THE PICTURE IS DISPLAYED IN BLACK AND WHITE Is the entire screen displayed in the same color as if viewing the screen through a cellop
14. 000 cee eee eee 6 2 Contact SAMSUNG WORLDWIDE 00 2c 6 3 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only 6 4 1 Major Safety Precautions 1 1 Before You Start Icons used in this manual ICON NAME MEANING Ep Caution Indicates cases where the function may not work or the setting may be canceled Note Indicates a hint or tip to operate a function Using this Manual e Make yourself fully aware of the safety precautions before using this product e Ifa problem occurs refer to the Troubleshooting section Copyright Notice The contents of this manual are subject to change without prior notice for performance improvement Copyright 2010 Samsung Electronics Co Ltd All Rights Reserved The copyright of this manual is reserved by Samsung Electronics Co Ltd The contents of this manual may not be partially or in whole reproduced distributed or used in any form without the written permission of Samsung Electronics Co Ltd The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are the registered trademarks of Microsoft Corporation VESA DPM and DDC are the registered trademarks of the Video Electronics Standard Association The ENERGY STAR logo is the registered trademark of the U S Environmental Protection Agency All other trademarks mentioned herein
15. 67 http www samsung com FINLAND 030 6227 515 http www samsung com FRANCE 01 48 63 00 00 http www samsung com More Information 6 3 EUROPE GERMANY 01805 SAMSUNG 726 7864 0 14 http www samsung com Min HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com ITALIA 800 SAMSUNG 726 7864 http www samsung com LATVIA 8000 7267 http www samsung com LITHUANIA 8 800 77777 http www samsung com LUXEMBURG 261 03 710 http www samsung com NETHERLANDS 0900 SAMSUNG 0900 7267864 E http www samsung com 0 10 Min NORWAY 815 56 480 http www samsung com POLAND 0 801 1SAMSUNG 172678 http www samsung com 022 607 93 33 PORTUGAL 80820 SAMSUNG 726 7864 http www samsung com SLOVAKIA 0800 SAMSUNG 726 7864 http www samsung com SPAIN 902 1 SAMSUNG 902 172 678 http www samsung com SWEDEN 0771 726 7864 SAMSUNG http www samsung com SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 http www samsung com ch min http www samsung com ch fr French U K 0845 SAMSUNG 7267864 http www samsung com CIS ARMENIA 0 800 05 555 AZERBAIJAN 088 55 55 555 BELARUS 810 800 500 55 500 GEORGIA 8 800 555 555 KAZAKHSTAN 8 10 800 500 55 500 KYRGYZSTAN 00 800 500 55 500 http www samsung com MOLDOVA 00 800 500 55 500 RUSSIA 8 800 555 55 55 http www samsung com TADJIKISTAN 8 10 800 500 55 500
16. MONITOR CHECK Displays the monitor number SELECT ALL Selects all monitors UNSELECT Cancels selecting all monitors Wsetupmenu Press this button to view the On Screen Display OSD O YA Up Down Left Right but tons amp Enter button Activates the selected menu item i INFO Displays the current picture infor mation Controls the contrast of the screen X Use this button to control the brightness of the screen AUTO Automatically adjusts the picture in lt Analog gt mode Sa Provides preset picture set tings optimized for various user environments such as editing a document surfing the Internet playing games watching sports or movies and so on EJ SOURCE Press the button to change the input signal SOURCE Analog Digital DP O RETURN Returns to the previous menu iM EXIT Exits from the menu screen Using the product 3 4 3 5 Using the Screen Adjustment Menu OSD On Screen Display The Screen Adjustment Menu OSD On Screen Display Structure TOP MENUS SUB MENUS _ PICTURE Brightness Contrast Sharpness MagicBright Coarse Fine Response Time m COLOR MagicColor Red Green Blue Color Tone Color Effect Gamma SIZE amp POSI H Position V Position Image Size Menu H Position Menu V Position TION E Reset Menu Transpar Language Off Timer On Off Off Timer Setting SETUP amp RESET ency Auto
17. Otherwise it may result in fire due to overheating of the wall outlet Plug the power plug in firmly e Otherwise it may result in fire Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord e Otherwise it may result in electric shock or fire due to a damaged power cord If the pins of the power plug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Major Safety Precautions A Caution Avoid unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Installation Related A Warning Avoid placing burning candles mosquito repellent or cigarettes on the product and installing the product near a heater e Otherwise it may result in fire Avoid installing the product in a badly ventilated AA location such as inside a bookshelf or closet les e Otherwise it may result in fire due to OSL IK internal over heating Avoid installing the product at an easily reachable height where children may reach it e Ifa child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surfa
18. SyncMaster MD230 MD230X3 MD230X6 LCD Monitor User Manual The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table Of Contents MAJOR SAFETY PRECAUTIONS Belore YOU SIA oi in wee oe oe acess oor anh eee eRe ean eeyes 1 1 Custody and Maintenance 00 0 c eee eee ee 1 2 Safety Precautions 2 e eee 1 3 INSTALLING THE PRODUCT Package Contents 00 cee eee 2 1 Connecting the Cables fora 1x1 Video Wall 2 2 Connecting the Cables for a 1 x 3 or 2 x 3 Video Wall 2 3 Kensington LOCK widen oe dees Ka ANA se ete eee eee 2 4 USING THE PRODUCT Setting the Optimal Resolution 0 0000 e eee eee 3 1 Standard Signal Mode Table 000 eee eee eee 3 2 Installing the Device Driver 00 cece eee ees 3 3 Product Operating Buttons a 3 4 Using the Screen Adjustment Menu OSD On Screen Display 3 5 INSTALLING THE SOFTWARE PELE Be AA AA 4 1 Elo APA tava S ee ee eae AA AA 4 2 MultiScreen 4 ANA GALA AM be eee ae ane ee ewes nna GWA 4 3 TROUBLESHOOTING Monitor Self Diagnosis 0002 eee eee eee 5 1 Before Requesting Service 00 cece ees 5 2 FAO eerie AA ee a ee ee ee eee ee 5 3 MORE INFORMATION Specifications Bak ANAN NAKA NLA dered ee ee earn 6 1 Power Saving Function
19. agicTune please visit our website Installing the Software 4 2 4 3 MultiScreen What is MultiScreen im MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections Installing the Software 1 Insert the installation CD into the CD ROM drive 3 4 Select the MultiScreen setup program amp If the pop up screen for the software installation does not appear on the main screen find and double click the MultiScreen setup file on the CD ROM When the Installation Wizard appears click Next Complete the remaining software installation steps according to the instructions displayed on the screen The software may not work properly if you do not restart the computer after the installation e The MultiScreen icon may not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MultiScreen The MultiScreen installation may be affected by the graphics card motherboard and the networking environment Operating System OS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista 32Bit e Windows 7 32Bit amp For MultiScreen the operating systems Windows 2000 or later is recommended Hardware e Atleast 32MB of memory e At least 60MB of free space on the hard disk drive Removing the Software Click Start select S
20. aving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Watching the product from too close a distance continuously may damage your eyesight AY nag It is important to give your eyes some rest 5 minutes every hour when viewing the product screen for long periods of time e This will alleviate any eye strain When a gas leak occurs do not touch the product or the power plug and ventilate immediately e A spark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or an alien substance enters the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product
21. ay result in a problem with the product or fire Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater e This may shorten the product life cycle or cause fire 1 3 Major Safety Precautions A Caution Do not let the product drop while moving it Do not place the product face down on the floor e This may result in a problem with the f product or injury e This may damage the panel of the product O When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity such as airports or stations where the product is continuously used for a long time and so on Cleaning Related Since using a sur
22. belong to their respective companies Major Safety Precautions 1 2 Custody and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth Do not clean the product with a flammable substance such as benzene or thinner or clean with a wet cloth This can cause a problem with the product Do not scratch the screen with your fingernails or a sharp object This can cause permanent scratches and damage to the product Do not clean the product by spraying water directly onto the product If water enters the product it can cause fire electric shock or a problem with the product Do not use a supersonic humidifer near the monitor A supersonic humidifier can cause a white stain to appear on the high gloss portions of the product due to the inherent characteristics of the high golss material The appearance and the color may differ depending on the model About persistent images Displaying a still image for a long time may create a persistent image or stain on the screen If you do not use the product for a long time set the power saving mode or screen saver Due to technological constraints of the LCD Panel manufacturer the images generated by this product may appear either brighter or darker than normal by appr 1ppm parts per million pixel The number of sub pixels of an LCD panel by size The number of Sub Pixels Max Horizontal Resolution x Max Vertical Resolution x 3 Example
23. bleshooting 5 2 5 3 FAQ FAQ PLEASE TRY THE FOLLOWING How can change the frequency refresh rate of the video signal You have to change the frequency of the graphics card Windows XP Change the frequency by selecting Control Panel Appearance and Themes Display Settings Advanced Monitor and then change the refresh rate under Monitor Settings Windows ME 2000 Change the frequency by selecting Con trol Panel Display Settings Advanced Monitor and then change the refresh rate under Monitor Settings Windows Vista Change the frequency by selecting Control Panel Appearance and Personalization Personalization Display settings Advanced settings Monitor and then change the refresh rate under Monitor Settings Windows 7 Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust reso lution Advanced settings Monitor and then change the refresh rate under Monitor Settings For more information refer to the User Manual of the com puter or the graphics card How can change the resolution Windows XP Change the resolution by selecting Control Panel Appearance and Themes Display Settings Windows ME 2000 Change the resolution by selecting Con trol Panel Display Settings Windows Vista Change the resolution by selecting Control Panel Appearance and Personalization
24. ce Avoid installing the product in a location exposed to dust moisture Sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Keep the plastic bags used to pack the product away from children e If children place the plastic bags over their heads they may suffocate CO o Make sure to use only the power cord supplied by our company In addition do not use the power cord of another electric appliance e Otherwise it may result in electric shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep a distance of at least 10 cm from the wall when installing the product for ventilation e Otherwise it may result in fire due to internal over heating Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e Ifyou use the product in a location exposed to excessive vibrations it m
25. e input signal lt Analog Digital or DP gt for each monitor 2 2 Option 2 1 Connect the monitors numbered as 1 to a PC using DP cables Connect them to the same PC 2 Connect the monitors numbered as 2 and 3 to the corresponding PC respectively using DVI or D Sub cables To use the video wall as multiple screens select each monitor using the multi control pad and press SOURCE to select an appropriate input signal lt Analog Digital or DP gt for each monitor Installing the Product 2 3 3 Specifying the Monitor Number The monitor number is set to 0 by default A monitor can be controlled by the multi control pad even if the monitor number is not specified ilag le si 1 Press the MONITOR SELECTION button on the back of the monitor to specify the monitor number Range 1 6 2 To control the monitor you want press the monitor number below MONITOR SELECTION on the multi control pad To control all of the connected monitors press SELECT ALL on the multi control pad 2 3 Installing the Product 2 4 Kensington Lock A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the manufacturer for more information refer to the User Manual supplied with the locking device for more information You must purchase t
26. ettings Control Panel and then double click Add or Remove Programs Select MultiScreen from the program list and click the Add Delete button 4 3 Installing the Software 5 Troubleshooting 5 1 Monitor Self Diagnosis e You can check if the product is working properly using the Self Diagnosis function e Ifa blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected perform the self diagnosis function according to the procedures below Turn the product and the PC off Separate the D Sub cable from the product Turn the product on Mm o Pg a If the product is working properly the Check Signal Cable message appears In this case if a blank screen is displayed again make sure that there is no problem with the PC and the connection The product is working properly Troubleshooting 5 1 5 2 Before Requesting Service Please check the following before requesting After Sales service If the problem continues please contact your nearest Samsung Electronics Service Center A BLANK SCREEN APPEARS CANNOT TURN THE PRODUCT ON Is the power cord connected properly Check the connection status of the power cord Is the Check Signal Cable message displayed on the screen Check the cable connecting the PC and the product If the message keeps appearing even though the cable connection is correct press 3 SOURCE on the multi control
27. factant which contains a large amount of alcohol solvent or other strong chemicals may result in the discoloration or cracking of the product exterior or the panel surface coming off be sure to use the recom mended cleansing agent only You can purchase the recommended cleansing agent from a service center Before cleaning the product unplug the power When cleaning the product do not spray water cord directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in electric shock or fire e Otherwise it may result in fire electric shock or a problem with the product Major Safety Precautions 1 3 A N Caution Avoid spraying cleansing agent directly onto the product 1 This may result in discoloration or cracking SS A of the exterior of the product or the panel LE coming off Use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related A Warning Since a high voltage runs through the product never disassemble repair or modify the product yourself e Otherwise it may result in fire or electric shock e Ifthe product needs to be fixed contact a service center If the product generates a strange noise a burning smell or smoke unplug t
28. frequency is represented in HZ The time taken to scan one line from the left most position to the right most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency The horizontal frequency is represented in kHz Using the product 3 2 3 3 Installing the Device Driver If you install the device driver you can set up the appropriate resolution and frequency for the product The device driver is included on the CD ROM supplied with the product If the supplied drive file is corrupted please visit a service center or Samsung Electronics website http www samsung com and download the driver Insert the driver installation CD ROM into the CD ROM drive Click on Windows Driver Complete the remaining installation steps according to the instructions displayed on the screen eo TO gt Select the model of your product from the model list MM SAMSUNG monitor installer Select the display adapter on which you wart to inlell te monitor 5 Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings For more information refer to the document about the Windows operating system 3 3 Using the product 3 4 Product Operating Buttons Multi Control Pad This product can be controlled by using the multi control pad O power Turns the product On Off MONITOR SELECTION Selects a monitor
29. hane paper Check the cable connection to the computer Reinsert the graphics card into the computer completely Check if the lt Color Effect gt is set to lt Off gt Is the graphics card configured correctly Set up the graphics card referring to the user manual THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER Did you change the graphics card or the driver Please press the AUTO button to run the auto adjustment function Did you change the resolution and frequency appropriate to the product Set the resolution and the frequency to the appropriate values in the graphics card refer to the Standard Signal Mode Table Is the graphics card configured correctly Set up the graphics card referring to the user manual THE PICTURES ARE OUT OF FOCUS Did you change the resolution and the frequency appropriate to the product Set the resolution and the frequency to the appropriate values in the graphics card refer to the Standard Signal Mode Table 5 2 Troubleshooting THE COLOR IS DISPLAYED IN 16 BIT 16 COLORS THE COLOR HAS BEEN CHANGED AFTER CHANGING THE GRAPHICS CARD Did you install the device driver for the product Windows XP Set the color again by selecting Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the color again by selecting Control Panel Display Settings Windows Vista Change the c
30. he Kensington Lock separately To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as a desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the Monitor O 4 Lock the lock O These are general instructions For exact instructions see the User Manual supplied with the locking device e You can purchase the locking device from an electronics store an online shop or our service center Installing the Product 2 4 3 Using the product 3 1 Setting the Optimal Resolution If you turn the power on after purchasing the product a message regarding the optimal resolution setting appears on the screen Select a language and the optimal resolution A V You can select a language with these buttons I SETUP MENU If you press this button the message dis appears e The message appears up to 3 times if the resolution has not been set to the optimal resolution e To set the resolution to the optimal resolution 1 When the PC is turned off connect the product and the PC and turn the power on 2 Right click over the Desktop and select Properties from the pop up menu 3 In the Settings tab set the resolution to the optimal resolution 3 1 Using the product 3 2 Standard Signal Mode Table The LCD monitor has one
31. he power plug immediately and contact a service cen ter e Otherwise it may result in electric shock or fire If you drop the product or the case is dam aged turn the power off and unplug the power cord Contact a service center e Otherwise it may result in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is dangerous e Otherwise it may result in electric shock or fire When cleaning the product disconnect the power cord and clean the product with a soft dry cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito repellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use a proper cleansing cloth Use the cleansing cloth with a small amount of water However if the cloth is contaminated by alien substances it may result in scratches to the exterior therefore shake off any alien substances from the cloth before using it When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product Avoid letting children to hang or climb onto the product e Otherwise it may result in the
32. http www samsung com UKRAINE 0 800 502 000 http www samsung com ua http www samsung com ua ru UZBEKISTAN 8 10 800 500 55 500 http www samsung com ASIA PACIFIC AUSTRALIA 1300 362 603 http www samsung com CHINA 400 810 5858 http www samsung com 010 6475 1880 HONG KONG 852 3698 4698 http www samsung com hk http www samsung com hk en 6 3 More Information ASIA PACIFIC INDIA 3030 8282 http www samsung com 1800 110011 1800 3000 8282 1800 266 8282 INDONESIA 0800 112 8888 http www samsung com 021 5699 7777 JAPAN 0120 327 527 http www samsung com MALAYSIA 1800 88 9999 http www samsung com NEW ZEALAND 0800 SAMSUNG 0800 726 786 http www samsung com PHILIPPINES 1 800 10 SAMSUNG 726 7864 http www samsung com 1 800 3 SAMSUNG 726 7864 1 800 8 SAMSUNG 726 7864 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com TAIWAN 0800 329 999 http www samsung com THAILAND 1800 29 3232 http www samsung com 02 689 3232 VIETNAM 1 800 588 889 http www samsung com MIDDLE EAST 8 AFRICA BAHRAIN 8000 4726 JORDAN 800 22273 SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com TURKEY 444 77 11 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com More Information 6 3 6 4 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and
33. ion Optimum resolution 1920 x 1080 60 Hz Maximum resolution 1920 x 1080 60 Hz Maximum Pixel Clock 186 MHz Analog DVI Display Port Power Supply This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Signal connectors 15pin D sub 24Pin DVI 20Pin DP Display Port USB In USB Out Multi Control pad used only Dimensions WxHxD MD230 528 6 x 308 0 x 60 5 mm 20 8 x 12 1 x 2 4 inch 5 6 Kg 12 3 lbs Weight MD230X3 L 1585 8 x 563 0 x 307 2 mm 62 4 x 22 2 x 12 1 inch 24 1 Kg 53 1 Ibs MD230X3 P 924 0 x 672 7 x 307 2 mm 36 4 x 26 5 x 12 1 inch 24 1 Kg 53 1 Ibs MD230X6 1585 8 x 760 3 x 307 2 mm 62 4 x 29 9 x 12 1 inch 43 1 Kg 95 0 Ibs VESA Mounting Interface 100 mm x 100 mm 3 9 x 3 9 inch Environmental consid Operating erations Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing MD230 Class B Information Communication equipment for residential use This device is registered for EMC requirements for home use Class B It can be used in all areas Class B equipment emits less electromagnetic waves than Class A equipment MD230X3 MD230X6 Class A Information Communica
34. is mode e lt Standard gt Select this mode when the surroundings are bright This also provides a sharp image e lt Game gt This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast screen refresh rate e lt Cinema gt This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment movie DVD etc e Dynamic Contrast gt Controls the picture contrast automatically so that bright and dark pictures are balanced overall Coarse Removes vertical noise lines line pattern from the screen The location of the screen may be changed after the adjustment In this case move the screen so that the screen is displayed at the center of the display panel using the lt H Position gt menu This function is only available in lt Analog gt mode Fine Removes horizontal noise lines line pattern from the screen If you cannot remove the noise completely with the lt Fine gt function adjust the lt Coarse gt and then use the lt Fine gt function again This function is only available in lt Analog gt mode Response Time Accelerates the response time of the LCD panel faster than the original response time so that moving pictures appear sharper and more natural e lt Normal gt e lt Faster gt e lt Fastest gt It is recommended setting the lt Normal gt or lt Faster gt when not viewing a movie
35. nction to restore the visual quality and color settings to the factory defaults e lt No gt lt Yes gt Menu Transparency You can select the transparency of the OSD e lt Off gt lt On gt Using the product 3 5 MENU DESCRIPTION Language Select a language for the OSD English Deutsch Espanol Frangais Italiano Svenska Pycckun Portugu s T rk e Polski Magyar The selected language is only applied to the product OSD This setting does not affect the other functions of the PC Off Timer On Off You can turn the Off Timer on or off e lt Off gt lt On gt Off Timer Setting Turns the power off automatically when the configured time is reached Auto Source e lt Auto gt The monitor automatically selects an input signal e lt Manual gt Users have to manually select an input signal PC AV Mode Set to lt PC gt when connected to a PC and lt AV gt when connected to an AV device This function does not support lt Analog gt mode Display Time The OSD automatically disappears if no action is taken by the user You can determine the time to wait before the OSD is hidden e lt 5 sec gt s10 sec lt 20 sec s200 sec gt INFORMATION PICTURE PAPA tn Cp a ba a a Digita SIZE amp POSITION SETUPERESET INFORMATION MENU DESCRIPTION INFORMATION Shows the frequency and resolution set on the PC 3 5 Using the product
36. not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation MagicTune The installation of MagicTune may be affected by the graphics card motherboard and the networking environment System Requirements OS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista 32Bit e Windows 7 32Bit es For MagicTune Windows 2000 or later is recommended Hardware e At least 32MB of memory e At least 60MB of free space on the hard disk drive eg For more information refer to the website Removing the Software You can only remove MagicTune through Add or Remove Programs in Windows To remove MagicTune complete the following steps 1 Click Start select Settings and select Control Panel from the menu For Windows XP click Start and select Control Panel from the menu 4 2 Installing the Software Double click the Add or Remove Programs icon in the Control Panel In the Add Remove window find and select MagicTune so that it is highlighted Click Change or Remove Programs to remove the software Select Yes to start removing MagicTune Wait until a message box appears informing you that the software has been removed completely oS ee S For technical support the FAQ frequently asked questions or information about the software upgrade for M
37. olor settings by selecting Con trol Panel Appearance and Personalization Personaliza tion Display settings Windows 7 Change the color settings by selecting Control Panel Appearance and Personalization Display gt Adjust resolution Advanced settings Monitor For more information refer to the Windows user manual for the computer Is the graphics card configured correctly Configure the color again in accordance with the new graph ics card driver WHEN I CONNECT THE MONITOR THE UNKNOWN MONITOR PLUG amp PLAY VESA DDC MONITOR FOUND MESSAGE IS DISPLAYED Did you install the device driver for the product Install the device driver referring to the descriptions about the driver installation Check if all the Plug amp Play VESA DDC functions are sup ported referring to the User Manual of the graphics card Install the device driver referring to the descriptions about the driver installation WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT SMALL ALIEN SUBSTANCES APPEAR ON IT Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges such things may be seen This is not a defect of the product A BEEP BEEP SOUND IS HEARD WHEN BOOTING THE COMPUTER If the beep sound is generated 3 or more times when booting up the computer please request service for the computer Trou
38. perature of the screen to a cooler color e Normal Sets the color temperature of the screen to the standard color temperature e lt Warm gt Sets the color temperature of the screen to a warmer color e Custom Select this menu to set the color temperature manually If you do not like the preset color temperatures you can manually adjust the colors of lt Color Effect gt This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode Color Effect You can change the overall atmosphere by changing the color of pictures This menu is unavailable when lt MagicColor gt is set to lt Full gt mode or lt Intelligent gt mode e lt Off gt Turns the lt Color Effect gt function off e lt Grayscale gt Displays pictures in black and white e Green Displays pictures in green mono color e lt Aqua gt Displays pictures in aqua mono color e lt Sepia gt Displays pictures in sepia mono color Gamma Using this menu you can change the intensity of the colors of medium brightness e lt Mode1 gt lt Mode2 gt lt Mode3 gt This is unavailable when lt MagicBright gt is set to lt Dynamic Contrast gt mode C SIZE amp POSITION PICTURE COLOR mage Size SIZE amp POSITION Menu H Position Menu W Positian SEITUPERESE NFORMATION Using the product MENU DESCRIPTION H Position Moves the position of the display
39. product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e fa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire 1 3 Major Safety Precautions Avoid moving the product by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or move the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid placing a liquid container such as a vase flowerpot beverage cosmetics or drugs ora metal object over the product e f water or an alien substance enters the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating A Caution Displaying a still image for a long time may create a persistent image or stain on the screen e Ifyou do not use the product for a long time use the power s
40. tion equipment for industrial use Attention dealers and users This device is registered for EMC requirements for industrial use Class A and can be used in areas other than general households SCREW HEAD TE mm LENGTH mm TYPE A FH 4 0 8 0 MACHINE B BH 10 0 Design and specifications are subject to change without prior notice More Information 6 1 6 2 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption When the product is in power saving mode the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse However the power saving function only works when the product is connected to a computer that provides the power saving function STATE NORMAL OPERATION POWER SAVING MODE POWER OFF Power MD230 46 Watts 1 Watts 1 Watts Consumption MD230X3 138 Watts 3 Watts 3 Watts MD230X6 2 6 Watts 6 Watts 6 Watts If there is no power cut off switch the power consumption is O only when the power cord is disconnected 6 2 More Information 6 3 Contact SAMSUNG WORLDWIDE Ifyou have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center NORTH AMERICA
41. ttons To adjust functions use the multi control pad e The monitors connected via USB cables can be controlled simultaneously by using the multi control pad A monitor which is not connected via a USB cable cannot be controlled e The multi control pad can be connected to any of the provided monitors Installing the Product 2 3 1 3 Connecting the Power Cord amp Primary Monitor 1 Connect the primary monitor and the rest of the installed monitors using power cap cords 2 Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to the 220V or 110V wall outlet The input voltage is switched automatically 3 POWER S W Turns the product on and off e When the product is connected to a PC you can turn the product on and use it e If DP lt DP gt cables are used for the connection select the input signal lt DP gt by pressing SELECT ALL and H SOURCE on the multi control pad e The power cord can be connected to any of the provided monitors as required However we recommend the connections suggested above 2 3 Installing the Product 2 using the video wall as multiple screens 2 1 Option 1 1 Connect each monitor to the corresponding PC using the DVI or D Sub cable 2 Each PC screen can be viewed To use the video wall as multiple screens select each monitor using the multi control pad and press amp SOURCE to select an appropriat
Download Pdf Manuals
Related Search