Home

Kathrein UFS 912si

1. 187 Internet htto www kathrein de KATHREIN KATHREIN Werke KG Anton Kathrein StraRe 1 3 P O Box 100 444 83004 Rosenheim GERMANY Antennen Electronic 936 3679 0710 ZWT Technical data subject to change
2. Yellow OPT In many menus all the editing and selection E options for that menu are shown at the bottom of the on screen display Where a Red i specific remote control button is required for executing them or calling them up this also will n Bi e z be shown see example screenshot above 47 Basic Operation in TV or Radio Mode Live Operation Remote control for live operation TV Radio Currently unavailable mmmn I OPN T Operation on standby off Call up teletext Call up main menu A 7 pri _Nolume louder Volume softer SN Ae a N WNNAAANANANAANANANANANANAUNUNANAAAANANONONUAUANANANAUOUCANANANANACNUNUNAARANANAATETANI ii Channel selection A UU wit Mute z Call up channel information info banner and detailed information EA 5 A es z z 4 Z go a Call up favorites list i Call up options menu E TVR Picture in picture function IW Switch between z TV radio mode e C II 4 gt lt ms O al v Q 14 lt O 14 A Q O 14 O F Cg Q a O n i 14 lt A U O oa op O O 4 e n J 14 lt o D O 14 n g to to e R more than once toggles between the TV Scart mode and the VCR Scart loop through mode lt A op O e O O O 14
3. Yes or No Define new PIN Code Confirm the selection with the button The following on screen display appears mo input Pin Code Use the number pad to enter your new four digit PIN code When the fourth digit has been entered the receiver will automatically to the next line Confirm PIN Code For security you must now repeat the entry of the four digit PIN code Your device PIN code has now been changed Keep your four digit PIN code in a safe place so that you always have access to your channels should you ever forget it If you have forgotten your password you must contact your dealer who will be able to unlock your receiver for you 121 Main Menu Settings Customize Screen Menu After calling up the menu you will see the following on screen display The individual items are selected using the Lalty buttons The changes to the current settings can be performed using the lt gt buttons or the numeric pad Sleep Timer You can use the Sleep Timer function to set an inactive time period after which the receiver will automatically switch into Standby mode To do this use the lt gt buttons to select On Exit the menu using the button Now press the button The receiver now displays a window in which you can use the lt gt buttons to select the desired inactive time period for the receiver After this the receiver will run quite normally
4. Now set the respective capacities for the various areas media center and timeshift The respective lines are selected using the Lally buttons Make the settings using the J buttons The storage volume that you assign to each area is dependent on the size of the hard disk being used 44 In order to use the recording functionality of the receiver you need a hard disk Would you like to set this ER Remove all external hard disks or USB sticks from the receiver and the confirm by pressing the OK key You can retry the set up by selecting Main Menu gt Interfaces gt Hard Disk Management Now connect the archive hard disk to the receiver Attention All data on the hard disk will be deleted Archive hard disk detected Now specify the variables for timeshift and the Media Centre Total Size 465 Gigabyte Recording Archive 445 Gigabyte Connection and Setup In the Recording Archive line you will see how must hard disk storage volume is reserved for recordings The capacity remaining for the recording archive is adjusted automatically depending on the storage volume assigned to the media center and timeshift area max 15 Gigabytes Use the Lalty buttons to switch to the Start set up line and confirm by pressing the button to start the process During the set up the following on screen display appears see screenshot on the right After a successful set up the following
5. 4 3 or 16 9 Picture format Select the type of screen display depending on your setting for the TV aspect ratio TV aspect ratio 4 3 Pan amp Scan or Letterbox TV aspect ratio 16 9 Always 16 9 or Auto matic Connection and Setup HDCP Select here whether HDCP digital copy protection is to be constantly set to On or is not to be activated Off To view some programmes it may be necessary for the setting to be set to On Show 4 3 Event Here you can select the type of screen display mode for 4 3 broadcasts on a 16 9 TV set Normal Pillarbox Stretched Full Screen or Zoom in Pan amp Scan Audio Format via HDMI Here you can select the type of audio signal that is transmitted by the HDMI interface Select the signal that your TV set can process Decoded PCM or S PDIF format Auto Dolby Digital Output Here you can select whether the receiver should automatically select the Dolby Digital soundtrack if this is transmitted Important instruction for picture output using YUV The YUV output can be used only if RGB is not selected as the output signal for the TV Scart socket In this case select Y C or FBAS as the output signal for the TV Scart socket Press the O green button to move to the next menu TV SCART Output Select the type of video signal at the TV Scart socket here Select the signal that your
6. Fu ball FEJ OVC Deutschland no data available complete channel list Provided that EPG rn data have been supplied transmitted 8 on by tvtv or by the channel provider the receiver shows the current programme being shown on each channel with start time finish time and progression bar a You can use the cursor buttons AP or the number pad to select the desired channel and if available you can use the a button to open further information on the desired programme If you want to view the programme currently being shown on a channel you need not exit the EPG just select the desired channel and press the button At the top right of the screen you will see the current TV picture for the selected channel The picture however only appears once the button has been pressed Previously what you saw was the picture of the old channel that had previously been selected even though the EPG was no longer set to that channel The Ea button allows you to look ahead in 15 minute steps to future programmes on the channels press the E button to return to the current time By pressing the O green button in the Current view you can display a schedule in 15 minute steps see screenshot on EEN the right The selection of the desired is a performed using the cursor buttons ae and confirmed using the button 61 Premium tv twv EPG Preview view programme listings The Previ
7. Transmitting satellite Transponder frequency EEA sorting EB button Polarisation OPT Symbol rate W yellow button Service ID Switch between the TV radio lists Call up editing options Call up the TVR o red dot button search function Ej blue button Ta button can be called up from any channel list 19 Editing the Channel List Selecting the channels to be edited Select a channel in the selected channel a list favorites list using the cursor a buttons see example screenshot on the right To select several channels to be edited at the same time if they are not listed directly following each other in the a selected channel list use the cursor AP buttons to select the first channel to be selected and then press the EB button The channel is shown with a coloured background Now select the further channels to be edited at the same time 4 q E using the cursor t buttons and select each further channel to be edited using the EB button see example screenshot on the right To select several channels that are listed directly following each other in the selected channel list you can start block selection see Edit channels Start Blockselection Editing channels channel lists After selection of the channel s to be edited press the o red dot button The following on screen display appears see screenshot on the right 80 Edit TV Channellist i
8. Automatic only for 16 9 or Always 16 9 only for 16 9 TV SCART Output Select here the type of video signal to be output at the TV Scart socket here Select the signal that your TV set can process Either RGB Red Green Blue signal Y C S Video signal luminance chrominance or FBAS Video VCR SCART Output Select here the type of video signal to be output at the VCR Scart socket here Select the signal that your recorder can process Either Y C S Video signal luminance chrominance FBAS Video Television System Select here the TV standard applicable for your region country Either PAL e g for Germany and Austria or NTSC e g for USA and Canada 115 Main Menu Settings Audio Settings After calling up the menu you will see the following on screen display The individual items are selected using the Lally buttons Changes to the current settings can be made using the lt gt buttons Preferred Audio Language Select here your preferred audio language You can choose between the following languages German English French Italian Spanish Czech Dutch Polish Turkish or Russian Preferred Subtitle Language Select here your preferred subtitles language You can choose between the following languages Deactivated off German English French Italian Spanish Czech Dutch Polish Turkish or Russian Audio Format via HDMI Here you can sele
9. a The cursor Ae buttons allow you to select a recording reminder Press the button to switch to the channel on which the recording reminder is scheduled The 5 buttons allow you to skip backwards and forwards through the future scheduled recordings a day at a time The o red dot button allows you to edit a recording reminder that has been scheduled You have the following selection options select with the Lalty buttons and confirm with the button Editing options for series recordings e Only this one selected episode of a series recording will not be recorded e No further selected episodes of a series recording will be recorded e Edit the selected recording Editing options for other types of recording e Scheduled recording is deleted e Edit the scheduled recording 76 Edit timer Premium tv twv EPG Editing options for the reminder function e Delete reminder e Edit reminder Editing a recording When editing a recording you can change all parameters apart from the recording mode Make the changes a using the cursor ay buttons and the number pad Press the button to confirm your changes and return to the Timer list view Timer overlap If your scheduled recordings overlap the Timer list view for the receiver shows the overlapping recordings with a blue background and the recording leading to the overlap is additionally shown in red script You now have the option of deleting one
10. ys MDR S Anhalt 266 267 268 269 270 771 ve WDR Bonn 273 274 275 Eea ccd Esa elite eel lt p Esa Ea it TV Channellist gg Entesa e MDR S Anhalt 2661 269 270 WOR Aches Aachen 271 Py EA WOR Dortmun E Jj WDR D sseldorf i f _ To Favorite FAV1 Musik Start Blockselection only appears channel has been selected for editing if just one Editing the Channel List Move i E Edit TV Channellist Use the Lally buttons to select Move ae be 52 NDR FS MV E T gt Z WDR Aachen F ae confirm your selection with the SE wonse o W utton JE WOR Dortmund E The following on screen display appears SSL WDR Duisburg a see example screenshot on the right MBM ZEA WOR Dusseldorf H Jj WDR Essen E D PA WDR M nster o a D I WORSiegen O Now use the cursor buttons or the PJ WOR Wuppertal H Ga RTLHBNDS number pad to select the new channel L i memory position s then confirm the a insertion with the button Delete Channels that are deleted from a list other than a favorites list are deleted irrevocably and can only be restored by performing a new channel search Deletion of channels from a favorites list is the only circumstance in which the channels remain present in the complete list the deletion only applies to the selected favorites list Use the Lalty buttons to select Delete and confirm you
11. 0ccccceeeeeeeeees 122 Fal ed Cis lt 0 2 eee ee ene art ne een a me eee re 123 PVR recording Setup cccccccssseseeeeeees 125 Mediacenter Setup ccccccccceesseeeeeseeeeeees 126 Automatic channel name update 126 Antenna amp Satellite eeeeeeee scenes 126 SAtFiNder ccccccsscceceeeceaeeeeceeececeeeeeaneeenaees 127 Tuner Configuration cccccsssssseeeeeeeeeesees 128 Edit Selenite S x cccccsnsesavsgue toieatanneaanenoasMateodseactt 128 Edit Transponder xicecccctieecacetieecmireeseneiecs 130 Main Menu Interfaces CI hard disk and network scdiessccsisncuacnantnctnadentaneseccsauiarnas 134 Common interface ccsesceseeeeeeeeeees 134 Important information ccccccceseeeeeeeeeeeees 134 Inserting the smart card and the CA module 135 Multidecryption csisnistscersvsincontsansarduescorinaecdeanaent 136 HDD Management cccsecessseeeseees 137 Ethernet SettingS cccccssssecssseeeeeees 138 Main Menu Applications 0 141 Applications ccccccececeeeeeeseeeeseeeeeeeeees 141 Main Menu Language Settings 142 Tuner Configuration cccesseeeseeeeeees 143 Media Centre cccscccsssecseeeeeeeeeeeeeeeees 165 Operation Without the Remote Control 166 Backup operation cccccecceeeeeeeeeeeees 166 Software update via the USB port 167 Performing
12. Archive Ks Brisant Magazine Vad 23 Jun 24 min Weltbilder kompakt Documentary Fri 28 May 14 min Filmtipp Magazine Fri 28 May 15min Abenteuer Wissen ao Documentary Wed 26 May 35min i red button Chapter view see Chapter view sub section in this section Folders in the recording archive The UFS 912 offers you the facility to create folders in the recording archive You can give these folders the names of your choice and add recordings to them Creating folders Use the Lalty buttons to select any recording and then press the o red dot button The following on screen display appears see screenshot on the right ween mm Copy to USB Dia l Start Blackselection Use the ajy buttons to select the Create new folder option and confirm by pressing the button 88 Recording Archive Playing Back Editing Recordings The following on screen display appears see example screenshot on the right The receiver always suggests the recording that was selected when you switched to the edit menu automatically as the folder name You can press the lt button to delete the name suggested by the receiver You can then give the folder to be created a new name as described under Operating instructions Alphanumeric entries Note To create a subfolder in a folder you have already created you must first open the main folder using the button Then follow the same process desc
13. set to the booked Pay TV channel Follow the instructions from the Pay TV provider If your Pay TV card is then still not enabled we recommend you briefly withdraw the CA module with the card out of the slot with the receiver switched on and then re insert it This information has nothing to do with the properties of the receiver it is merely intended to assist you HDD Management After calling up the menu you will see the following on screen display You have the following selection options Format Media Archive Make dedicated HDD Format Record Archive delete Format Media Archive delete Make dedicated HDD You can only use the first two functions if an archive hard disk has already been set up Deleted data cannot be restored it is irrevocably deleted Use the a v buttons to select the desired action Format Record Archive Pressing the button irrevocably deletes all recordings TV and radio currently stored on the hard disk connected to the receiver As a security feature you are asked to confirm again by pressing the button that you really want to delete these files Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs 137 Main Menu Interfaces CI hard disk and network Format Media Archive Pressing the button irrevocably deletes all music MP3 and images JPEG files currently stored on the hard disk connec
14. r O oO 14 5 O O 14 Q z J pe O gt O r 2 14 lt Cp O p O O a gp e U 14 0p o r gt 14 oO G p n O 2 48 Basic Operation in TV or Radio Mode Live Operation Call up EPG Electronic Suomi ff a fo Toe Call up the recording archive E Programme Guide Pre Ae om Navigation channel or change channel option cE Call up channel list confirmation call up selection CEECEE Call up media center MP 3 JPEG ETET a ma Fast rewind cS Start playback Call up recording archive EB Start timeshift freeze frame pause HATHREM o Start recording OTR gt Fast forward E3 Stop playback timeshift record S LT N Changeover between TV and Radio operation TVR The changeover between TV and radio operation is performed using the J blue button Setting the volume The volume is adjusted using the buttons Channel selection Direct channel selection The button allows the channel to be selected from the sorted version of the currently selected channel list favorites list If the channel slot in the channel list is known the desired channel can also be called up directly by entering the channel slot using the number pad on the remote control example ASTRA HD is at channel slot 10 in the currently selected channel list to call it up successively
15. the playback or whilst in the recording 00 21 14 archive Chapter 5 Delete Chapte OK Playback BACK B h k 91 Recording Archive Playing Back Editing Recordings Selection of the recording s to be edited To select a recording select the desired Recording Archive recording in the selected sort list using Ordered by Date Serien f nai Folder Dra HDD 62 215 GB Thu 24 nme senes bas ae ei the cursor CaP buttons see example A screenshot on the right If the relevant ra Folder recording is stored in one of the folders ce you have created first select the Zwei rzte sind einer zu viel 5 an Ai i R Comedy Wead 23 Jun 94 min folder containing the recording using ro Brisant Magazine Wed 23 Jun 24 min T N Peg Gro e Oper Tue 8 Jun 35mn f a the cursor ae buttons and then mie gt confirm with the button Now select the recording to be edited using the a cursor EP buttons To select several recordings to be edited at the same time if they are not listed directly following each other in the ele gicnive a a o selected sort list use the cursor Cy the District E buttons to select the first recording BREE wel Arcte sind einer zu viel oT Comedy Wed 23 Jun 34 min to be selected and then press the EB Gro e Oper button The recording is given a coloured PETTEE a background and marked with a tick e ane Now select the further recordings to ita AE Aa be edit
16. turntable to move to its null position Set Borders Select the Set Borders field In this menu you can set the limits for your turntable This is particularly necessary if the turntable has only a restricted range in which it can turn before striking an obstruction such as a wall or tree Press the button The following on screen display appears The following buttons allow you to control the movement of the turntable Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate to the East step by step BW UD Start slow rotation to the East Once you have reached the desired East West limit switch to the respective field Set current position for border and press the button to confirm If you subsequently want to delete the set limits switch to the Reset border positions field and press the button to confirm deletion of the limits You can then set new values for the limits Once you 30 Connection and Setup have set all the limits press the cx button Press the O green button to move to the next menu The following on screen display appears LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Simple or User defined LNB Frequency MHz You only need
17. Pay TV provider Network Search Use the j gt buttons On Off to select whether a network search should be performed If you set the Network Search to Off only the factory default transponders for the satellite s you previously selected will be searched for new as yet unsaved channels If you set the Network Search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders Once you have performed all the settings use the Lalty buttons to switch to the Start Search selection field and confirm the start of the searching using the button The following on screen displays during and in connection with the search are identical to those for the automatic search 104 Main Menu Channel Search Search with Service ID After calling up the menu you will see the following on screen display The Lalty buttons allow you to select different sets of parameters for the search Satellite Use the lt gt buttons to select the satellite that is transmitting the channels to be searched By a pressing the button at this point you can view a list of the installed satellites Use the r buttons to select the satellite you want and confirm your selection with the button Make sure your reception system is aligned to this these selected satellite s Transpon
18. Risk of fatal injury due to electric Shock Cleaning Disconnect the mains plug before cleaning the unit Only use a dry cloth for cleaning and only clean the outer surface Never open the casing of the unit Touching the parts inside the unit carries a risk of death due to electric shock Playing children Make sure that children do not push any objects into the ventilation slots Risk of fatal injury due to electric shock Earthing The antenna system must be earthed as specified or equi potentially bonded EN 60728 11 and any national regulations must be complied with Risk of voltage surges due to lightning Strikes Power supply voltage Only operate the unit at the specified mains voltage indicated on the rear of the unit or on the external power pack The unit may only be connected to the mains and turned on once it has been connected to the antenna and to the TV set or the cable network and PC If the mains voltage is too high there is a risk of fire Pvt a o TO fa T Warning gt Warning Do not cover Moisture direct sunlight naked flames Protect the unit against moisture dripping and splashed water do not place any filled objects such as vases on top of the unit Do not place the unit close to a heater or expose it to direct sunlight and do not operate it in damp locations Only use the unit in a moderate climate not in tropical conditions Plac
19. Without the Remote Control Software update via the USB port A pre requirement for the updating via a USB device is an empty USB device such as a USB stick formatted as FAT32 containing only the operating software or channel list to be loaded It is essential that the operating software to be loaded is stored on the USB device under the following directory structure Main folder kathrein Subfolder L ufs912 You can also download the updates from the Internet The address is http www kathrein de You will find the software at Service Software and Downloads Receiver UFS 912 Performing the software update 1 Switch the receiver to the standby mode using the Standby button on the receiver see previous page 2 Switch off the receiver at the main switch at the rear of the unit 3 Now connect your USB device with the new operating software in the required directory structure to the receiver using the USB port on the front panel of the receiver 4 Keep the TV R button pressed and switch the receiver on again using the main switch at the rear of the unit The following on screen display appears Emergency Boot Once the receiver has displayed this text you can let go the TV R button Then the receiver undertakes all the necessary update steps and on completion of the update starts in the operating state last selected Do not switch off the receiver during this process wait until the automat
20. You can choose from the following LNB types Universal or Simple or User defined 21 Connection and Setup LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined On this aspect also refer to the documentation supplied with your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the number pad 22 kHz control You only need to specify this data if your LNB type is Simple The 22 kHz signal is needed to switch LNBs when using multi feed reception and to switch between Low and High band On Off Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite press the O green button The receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 22 Connection and Setup DiSEqC 1 0 The individual items are selected using the Lally buttons If you require to access submenus they can be called up using the button The changes to the current settings can be p
21. absence thunderstorms mains socket accessibility 11 Connection and Setup View of rear panel 6 7 11 12 13 1 2 3 4 5 8 9 10 14 1 On Off switch 7 Network connection Ethernet 2 Mains power cable 8 2x USB 2 0 ports USB A connectors 3 Data interface only for service optionally 9 HDMI connection for an infrared sensor not included 4 Optical data stream output SPDIF Sony Philips Digital Interface Format for Dolby Digital AC 3 audio 12 3 x Cinch connections for component outputs YUV labelled Y Pb Pr 10 Audio outputs L R cinch sockets 11 Video output composite colour IF loop through output 13 Scart socket for TV connection 14 Scart socket for VCR AUX connection IF input The unit is not fully disconnected from the mains see the sections Safety Instructions Important Instructions and Periods of extended absence thunderstorms mains socket accessibility 12 Connection and Setup View of front panel flap folded down 1234 7 KATHREIN UFS 9k S LED 6 8 1 SD card slot 6 16 character alphanumeric display 2 USB 2 0 port for software updates 7 Channel selection buttons 3 Standby button On Off 8 TV R button switching between TV and 4 Media button ranio MHAR 5 Common Interface for two CA modules for pay TV cards CA modules and Smartcards are not included with this product LED in the front panel dis
22. all components of a single cable system that satisfy this standard can be installed in a satellite system Smart card Card from Pay TV provider to decrypt its channels Standard gateway Is used as an interface between two networks or computers that are linked via a router As a result the it is possible to transmit data Standby Standby mode Streaming Transmission of data recordings in real time Short Technical Glossary Subnet mask Defines an IP address range in a subnet small independent network Symbol rate The symbol rate describes the quantity of data that is transmitted per second The symbol rate is measured in MSymbols s and is equal to the number of symbols received per second Timeshift function Time shifted playback Transponder A transponder is a frequency converter which receives TV and radio signals broadcast from the earth converts them and the rebroadcasts them to the earth at a different frequency A satellite has several transponders Analogue transponders transmit only one TV channel and possibly multiple radio channels on a single transmission frequency Digital transponders simultaneously transmit several TV and several radio programmes on a transmission frequency If a channel provider is broadcasting several TV channels via a digital transponder we refer to the provider s channel package The terms digital transponder and channel package have the same meaning UPnP Sta
23. already pre set on the UAS 481 and cannot be changed When you have made all settings press the cx button 160 Tuner Configuration Satellite 1 Select the Satellite 1 field and press the button to make the settings for the first satellite to be received The following on screen display appears example Satellite and Position Select the Satellite and Position field Select here the satellite on which your reception system is aligned Pressing the button presents an on screen display of the satellites stored in the receiver a Use the at buttons to select the satellite to be received and confirm the selection using the button The selected satellite is added Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar If a connection to the one cable system cannot be established check your settings frequency and transmission channel and if necessary call for expert help When you have completed all settings for the satellite press the button three times The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving 161 Tuner Configuration User defined The individual items are selected using the Lalty buttons If you need to access sub menus the
24. backward 24 hours in the EPG e g into Current and into Preview cy ta i button Fay MP Select the currently selected channel in all views Pressing the or button again closes the EPG and the selected channel is shown again on the TV screen o red dot button Add a programme to the recording settings button Search for a particular programme or programme content e g key word search from the detail information or other programme times enter the search expression using the number pad on the remote control see also the section Operating Instructions Alphanumeric entries a button Shows any further information on the selected programme button Call up the tools menu HATHREM a Navigation within each view is always performed using the cursor ae buttons The Lally buttons allow you to select individual channels programs and the KJ buttons allow you to scroll from page to page in the currently selected list Pressing the or u button exits the EPG and returns to the TV picture 60 Premium tv twv EPG Views using the EPG Current view TV Program Guide CHAIIVIN E The Current view can be called up at any ANIXE HD Anixe Wake Up Yoga Jetz time in EPG by pressing the green no date available button no data available In the Current view you can see all faba channels displayed in the order of the aval 20 21 PYA Eurasport
25. been made press the button to save the new transponder Delete Transponder Press the button to delete the currently selected transponder As a security feature you are asked to confirm again by pressing the button that you really want to delete the transponder 133 Main Menu Interfaces CI hard disk and network After calling up the menu you will see the following on screen display You can choose between various different menus Common Interface HDD Management Ethernet Settings Use the v buttons to select the desired menu and confirm your selection using the button Common interface Important information Always follow the operating instructions from your Pay TV provider and the instructions supplied with the smart card and the CA module Smart cards and CA modules are not included with this product The cards and modules are issued by the respective pay TV providers and contain the subscriber data and details of the channels for which the subscriber has paid These channels are always scrambled Contact the Pay TV provider if you are interested in subscribing to a particular Pay TV channel You are responsible for the use of the smart card in the CA The smart card sold by the Pay TV provider specific to a particular encryption technology is inserted into the CA module Store your card and PIN code securely when not in use 134 Main Menu Interfaces CI hard disk and netw
26. channels are searched for scrambled only Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant Pay TV provider 101 Main Menu Channel Search Network Search Use the ED buttons On Off to select whether a network search should be performed If you set the Network Search to Off only the factory default transponders for the satellite s you previously selected will be searched for new as yet unsaved channels If you set the Network Search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders Once you have performed all the settings use the ajy buttons to switch to the Start Search selection field and confirm the start of the searching using the button The following on screen displays appear example TV channels Radio channels found found During the search you will see the following on screen display example The new channels found are identified by the suffix New see example screenshot on the right Note You can cancel the search at any time by pressing the u button After completion of the search you will see the following on screen display example Press the button The
27. channels saved in the selected favorites list using the gt buttons 50 Basic Operation in TV or Radio Mode Live Operation Now use the respective coloured button to select the category in which you wish to open a channel list TV Channel i red button Call up the Favoriteslist category lt ASTRA HD Contains the following channel lists PavCiicliste IHG fien Oo green button Call up the 3 Complete List category Loe 3 Contains the following channel lists A fetenien Complete list QVOX S O J ProSieben OOOO Channel lists sorted by satellite T aee ooo BR alpha o 1 BR alpha TV Channel Ej yellow button Call up the O AZ ON alphabetically sorted lists iE Disney Channel so Disney Cinemagic 111 Contains the following channel lists iii DisneyXD o A j i Dubai Sports oo cep Dubai OO OOOO O AST Dunav O O OOOO Z A eg eous OOOO J ERFeins O OO 0 9 JJ ESPN Ameria Da poe ESPN America S CS St Ordered by individual letters 2 Ox Channel list selection Use the aa buttons to scroll through the currently available channel lists If you want to see an overview of the currently available channel lists press the coloured button for the selected category again you will then obtain the following on screen display for example the favorites lists einsfestival The desired channel list is selected using a the
28. compatibility as the transmission process DVB S2 and the compression technique MPEG 4 are used for broadcasting The principal features of HDTV are the larger picture format 16 9 the doubled number of scanning lines increased from the currently 625 to 1 250 and digital sound quality High band Satellite frequency range between 11 7 GHz and 12 75 GHz H 264 Another designation for MPEG 4 IP address Internet Protocol address Every unit that can be used in a network has a dedicated IP address so as to obtain an unambiguous assignment address for e g the exchange of data JPEG Joint Photographic Experts Group Image compression technique LAN Local Area Network Local network Linux Operating system LNB Low Noise Block Converter Converts the satellite downlink frequencies into the Sat IF Low band Satellite frequency range between 10 7 GHz and 11 7 GHZ MP3 File format for compressed audio files MPEG 2 MPEG is the abbreviation for Moving Picture Experts Group a working group that formulates internationally applicable standards for the digital compression of video and audio MPEG 2 has become established as the standard for compression of digital TV signals MPEG 2 works up to a data rate of 100 Mbit s MPEG 4 A further development of MPEG 2 with even higher data compression intended for HDTV transmissions Network Connection of several PCs that as a result can communicate and exchang
29. completed all settings for this satellite press the cx button In the same way now make the settings for the number of satellites you selected previously example Satellite 2 Satellite 3 and Satellite 4 When you have completed all settings for the satellites you required press the ace button twice The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving DiSEqC 1 1 The individual items are selected using the Lalty buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the KJ buttons or the number pad The following on screen display appears Number of Satellites Make the settings for the satellites up to 64 satellites here Select the satellite position 1 64 in the example on the right the ASTRA 19 2 East satellite has been selected in the first position Use the Lalty buttons to select the line Satellite 1 and press the button to open the settings selection for the first satellite 147 Tuner Configuration The following on screen display appears Satellite and Position Press the button to display the on screen display with all the pre programmed satellites Use a the at buttons here to select the first satellite from which the signal is present at the tuner and pre
30. current time or from the time you switched to the channel The advantage of this is that you do not lose the part of the programme you were watching before you decided to record it When you select Off you can only record the programme as from the point you press Record and lose the portion of the programme 7 19 before you started recording For this see also the sections Basic Operation Automatic timeshift Default Record Duration Select here the default record duration If the channel information gives no start time and end time for the programme that is to be recorded the receiver will automatically use the default record duration that is set here You can choose between 30 minutes and 3 hours in 30 minute increments 125 Main Menu Settings Mediacenter Setup After calling up the menu you will see the following on screen display The individual items are selected using the Lally buttons Changes to the current settings can be made using the ED buttons Simple MP3 Mode Here you can use the aj buttons to select Simple MP3 Mode On Off You need to perform this setting if the receiver in conjunction with the UPnP server encounters problems with playing MP3 files MP3 Player Screensaver Here you can use the Je buttons to select MP3 Player Screensaver On Off In the case of the selection of On on the playback of MP3 files only playback information for the file currently pla
31. enter the correct time Then use the button to confirm your entry When you have completed all settings press the O green button to complete the first installation If you have already connected an external hard disk to the rear of your unit the receiver automatically displays the message Set up the archive hard disk see next page If no external hard disk is connected to your receiver this completes the first installation and the receiver goes into TV mode Set up the archive hard disk To make recordings using the UFS 912 and utilise the timeshifting and recording archive functions you must connect an external hard disk to the rear of the receiver USB and set it up as explained in following Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs 43 Connection and Setup If you now wish to set up an archive hard disk press the button if not press the vce button to abort this procedure Now remove all hard disks or USB sticks from the receiver and then confirm by pressing the button or pressing the button to abort this procedure If you have aborted this procedure the following on screen display appears see screenshot on the right Press the button to revert to the TV picture Now connect the hard disk that is to be set up as an archive hard disk to the receiver The following on screen display appears see screenshot on the right
32. entered in a network in conjunction with a router 178 DiSEqC DiSEqC Digital Satellite Equipment Control is a communication system between a satellite receiver master and the peripheral satellite components slaves such as LNBs multi switches rotating antenna systems It is a single master multi slave system i e there is only ever one master in the satellite system All activities start from the master DiSEqC components lf DISEqC switching matrices are cascaded the master receiver must transmit the DiSEqC signal several times so that all DiSEqC multi switches in the cascade receive their commands These days DiSEqC components slaves must be downward compatible i e respond to the analogue switching criteria from receivers that are only equipped with H V and 22 kHz control signals A DiSEqC switching matrix will work with analogue switching criteria until the DiSEqC command from the master is received All analogue switching criteria are then ignored DNS server Domain Name System server Is used to determine IP addresses other PCs or receivers within a network with DHCP function enabled Dolby Digital 5 1 Dolby Digital is a sound transmission that allows digital surround sound to be output on a home cinema system DVB Digital Video Broadcasting DVB S refers to the transmission method S satellite C cable T terrestrial DVB S2 An enhanced DVB S signal f
33. lists After selection of the channel s to be edited press the o red dot button The following on screen display appears see screenshot on the right Lock Start Blockselection Move See Editing channels channel lists Move Remove from favoritelist Start Blockselection only appears if just one channel has been selected for editing Use the Lalty buttons to select Remove from favoritelist and confirm your selection with the button The selected channel s are deleted from the previously selected favorites list but not from the complete list 83 Editing the Channel List Lock See Editing channels channel lists Lock Start block selection See Editing channels channel lists Start block selection Rename favoritelist Use the la i buttons to select Rename favoritelist and confirm your selection with the button You can now rename the favorites list you selected The following on screen display appears see example screenshot on the right Alphanumeric entries Alphanumeric characters are entered as described in Operating instructions Confirm the name you have entered using the button 84 Recording Archive Playing Back Editing Recordings Function can be used only when the archive hard disk is connected and has been set up Tested only with hard disks from the Kathrein product range see
34. not been deleted Deleting chapters does not alter the recording in any way 97 Recording Archive Playing Back Editing Recordings Deleting several chapters Selecting the chapters to be deleted not in the sequence of the Chapters overview To select several chapters to be deleted at the same time if they are not listed directly following each a other in the chapter overview use the cursor 4 buttons to select the first chapter to be selected and then press the EB button The chapter is shown with a coloured background Now select the a other chapters to be deleted at the same time using the cursor f buttons and select each further chapter to be deleted using the EB button Selecting the chapters to be deleted in the sequence in the chapter overview To select several chapters that are listed directly following each other in the Chapters overview you can start block selection First use the Lalty buttons in the chapter overview to select the chapter at which you want to start the block selection Then press the o red dot button and use the Lally buttons to select Start Blockselection Confirm the selection with the button Now you can use the Laliy buttons to select several chapters in their sequence within the chapter overview Deleting the selected chapters After selecting the chapters to be deleted press the o red dot button Use the Lalty buttons to select Del
35. on Premium EPG H HDD management Individual reception systems Interfaces K Key word search in detailed information L Language settings Lock M Make dedicated HDD Manual channel search Media centre Media centre settings More episodes 184 Subject Index 124 158 64 112 168 10 17 123 123 123 68 58 137 170 134 67 142 82 93 138 103 165 126 66 Motorized antenna Move to folder Moving MP3 player screensaver Multidecryption My hints N Network settings O One cable system One Touch Recording OTR 2 Parental lock Performing the software update Playback banner duration playback information Playback functions Playback of a recording Post recording time 150 95 81 126 136 64 138 36 157 or 120 167 122 90 90 124 Power consumption in standby mode lt 1 W 9 Premium tvtv EPG Preview view programme listings Pre recording time Programme not in EPG PVR recording settings R Recording archive play back edit recordings Recording daily Recording once Recording settings programming the timer Recording user defined Recording weekly 59 62 124 70 125 85 172 72 69 13 73 Subject Index Reminder function switch over to programme 75 Remote control in live operation TV Radio 48 Rename 93 S Sat finder 127 Sat IF connection examples 170 Save chann
36. picture at the end of the first installation contact your specialist dealer You should perform the tuner configuration make changes yourself only if you are fully familiar with the particulars of your reception system You can set up the tuner configuration for the following types of reception systems Simple LNB DISEqc 1 0 DISEqC 1 1 One Cable UAS 481 One Cable EXR EXU User or Motorized Antenna DiSEqC 1 2 DiSEqo 1 3 Continue as described in the first installation for the type of reception you have selected 20 Connection and Setup Simple LNB The individual items are selected using the Lally buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The following on screen display appears Select Satellites 4 Use the ae buttons here to select the satellite from which the signal is present at the tuner and press the button to confirm your selection The selected satellite will be identified with a tick Once you have selected the required satellites press the O green button The following on screen display appears Satellite Configuration Make the settings for the satellites here LNB Type If your reception system does not have a Universal LNB use the aj buttons to select the LNB types that are used in your reception system
37. premium tvtv EPG This EPG is not only a clearly laid out electronic TV guide but also enables programmes to be copied directly from the related EPG view to the timer It also offers the facility of selectively sorting the programme information by categories and the generation and management of your own programme tips The premium tvtv EPG also offers a comprehensive search function allowing searches by repeats actors and key words amongst others The receiver indicates the channel name on the 16 character alphanumeric display In addition the display has 16 icons that provide information on specific receiver conditions at a glance e g Dolby Digital HD timer The HDMI interface is ideal for connecting the receiver to a flat screen TV set In addition a YPbPr connection a video composite connection and two Scart connections are provided Via the optical audio output the receiver can output a Dolby Digital data stream AC 3 to a Dolby Digital system Using the USB port on the rear it is possible to connect an external USB hard disk to record films and radio broadcasts without loss of quality Timeshifting is also possible with a hard disk Using the USB port on the front of the unit software updates can be loaded onto the receiver The receiver s operating system is based on LINUX The receiver is available in a silver or black casing Product package m UFS 912 m Power supply cable m Remote control RC 671 m Operating Manual m HDMI ca
38. searched for If you previously selected more than one satellite under Select Satellites you must now make this setting for the other satellites Switch to the Satellite and Position field and select the next satellite Repeat the set up of the turntable for this satellite as described above Once you have made the settings for all the selected satellites press the nce button three times to exit the menu The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving 156 Tuner Configuration OneCable System The individual items are selected using the Lally buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the KJP buttons or the number pad The following on screen display appears Use the aj buttons to select the single cable system used in your reception system EXR EXU For all Kathrein one cable matrices UAS 481 For the Kathrein one cable LNB UAS 481 User defined For all one cable systems not covered by either of the above specifications Continue as for the explanation for the single cable system you have selected in this section 157 Tuner Configuration EXR EXU The individual items are selected using the alty buttons If you need to access sub menus they can be called up using the
39. the KJ buttons or the number pad For the settings please refer to the documenta tion with the UAS 481 No frequency can be used by more than one receiver The receivers would interfere with each other Tuner transmission channel Select a free available transmission channel SCR 0 SCR 3 Tuner SCR Frequency transmission frequency This setting is already pre set on the UAS 481 and cannot be changed When you have completed all settings press the O green button The following on screen display appears LNB Type LNB Frequency These settings are pre set for the UAS 481 and cannot be changed Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar If a connection to the one cable system cannot be established check your settings frequency and transmission channel and if necessary call for expert help When you have completed all settings for the satellite press the O green button The receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 39 Connection and Setup Channel Search The individual items are selected using the Lalty buttons Changes to the current settings can be made using the lt gt buttons If you do not wish to perform a channel search press t
40. this is the menu where that can be done No other receiver can then use this transmission frequency unless the PIN is entered Select the setting On You can then use the number pad to enter a PIN code 0 255 in the line underneath Tuner PIN Code Tuner transmission channel Select a free available transmission channel SCR 0 SCR 7 Tuner SCR Frequency transmission frequency Select here one of the free available transmission frequencies See example on the right EXR 551 for assignment of a transmission channel to a transmission frequency When you have completed all settings press the O green button 37 Connection and Setup The following on screen display appears LNB Type settings If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Simple or User defined LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined On this aspect also refer to the documentation supplied with your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the num
41. view the scheduled recordings in the timer list view of the EPG see Timer list section 69 Premium tv twv EPG Programme not in EPG Select any programme on the channel on which the desired programme is to be broadcast at a later date and press the o red dot button The following on screen display appears example As there is no EPG data you must enter the data date start end manually Enter a the data using the cursor AP buttons or the number pad Press the button to save your settings 70 Premium tv tv EPG Setting the storage location for recordings As described in the Recording Archive section it is possible to create folders for your recordings and to store them in these folders If folders have already been created for recordings you have the option of specifying a folder as the destination when scheduling recordings in the EPG It makes no difference which recording mode you choose after selecting the folder e g for a series recording all subsequent recordings of the programme will be stored in the folder you have selected The procedure is as follows In the recording settings press the Lally buttons to select the Target field and then press the button The following on screen display appears example T ii a To Recording Archive Record TEXT New folde Now use the Lally buttons to select the desired folder or select To Recording Archive Record
42. 1 press the as buttons on the remote control 49 Basic Operation in TV or Radio Mode Live Operation Channel selection from the channel list Press the button to open the channel list The following on screen display appears Call up the Currently selected Currently selected LiVe Picture from complete list channel list channel the selected channel ia green button TV Channel m Signal Le e OF HD o ay strength Channel list E and za SA RTL Television Eene She oT Si quality ces VOX ee Call up the re j ProSieben ET favorites lists Z j kabeleins as tO B lt j Bayerisches FS S d _ EEManiii FAV eee BRalpha es bis 12 orrsnos O Call up sorting by satellite and Transmitting satellite Call up alphabetic Switch Git sorting between Transponder frequency the TV Polarisation sl E Symbol rate O yellow button radio lists Service ID Call up editing Call up the of the TV list search function o button can E button can be called up from be called up from any channel list any channel list Information on selecting favorites lists You can also call up the favorites lists directly from TV screen using the i red button Then use the a cursor AP buttons to select the desired favorites list and confirm your selection using the button The receiver automatically selects the first channel saved in the favorites list and returns to the TV screen You can now select the sequence of
43. 4 1 48 S N dB gt 65 Power supply Power supply voltage V Hz 100 240 50 60 Power consumption max typ operation standby W lt 26 13 lt 0 5 LNB supply horiz vert V imA 14 18 max 400 Control signal kHz 22 DiSEgC 1 0 1 1 1 2 1 3 SCR one cable system Connections Sat IF input output 2 x F socket TV VCR connection 2 x Scart sockets Video output analogue 3 x Cinch socket YPbPr 1 x Cinch socket Video audio output digital 1 x HDMI Audio output analogue digital 2 x Cinch socket standard fibre optic SPDIF Data interface Common Interface For 2 CA modules USB 3 x 2 0 Ethernet 1 RS 232 1 SD card reader 1 General information Ambient temperature C Max 5 to 40 Unit dimensions W x H x D weight mm kg 342 x 67 x 273 lt 3 169 Technical Appendix Sat IF connection examples Individual reception systems Community antenna network systems 4 x Sat IF ee z N a Y Zinki 4 Bj uae T Eat om 960 2150 Miz Mr abs WII ie LIRLI a MEM Sat IF ii Ty 950 7150 MHz Overvoltage protection KAZ 11 KAZ 12 170 Technical Appendix Community antenna network systems 8 x Sat IF multi feed I E wee UAB j ee a n ny 7 F Sat IF iT i 4 940 7150 MHz E Community antenna network systems 16 x Sat IF multi feed ii HU BERR Ree eee AL LE pret TTI AA LA LA LE LI LIL iEomi SiM SETITITTL ViVi bi lie To m
44. English French Italian Spanish Czech Dutch Polish Turkish and Russian Press the O green button to move to the next menu 17 Connection and Setup The following on screen display appears a Use the O buttons here to select the basic settings for the video and audio output of the receiver to the TV set For this refer to the operating manual for your TV set and take care to select only those settings that your TV set can process Video Output via Select the connection on the receiver to which you have connected your television Either HDMI YUV ogol HDMI YUV Resolution Here you can select the video resolution that will be sent to your TV set Either 10801 resolution 1920 x 1080 half screen images 576p resolution 720 x 576 full screen images or 720p resolution 1280 x 720 full screen images Automatically Force 5 6i must be supported by the TV set otherwise you will not see a TV picture You can only only need to make this setting if you have selected the setting Automatic for HDMI YUV Resolution If for a programme that is transmitted in the format 720 x 5 76 standard TV the original format is to be transmitted to the TV set select the On setting If the setting is Off the programme may be automatically scaled up to the HDTV format 720p by the receiver 18 or TV aspect ratio Here you can select the TV picture format Either
45. FHF YORKIN a Motaweck Intertase cd FE Uebarhee a A ra e rrer Mediacenter und Netzwerk Web Interface Ereeterte Funkhooen iz B YouTube esi gulig ab SofleaeStend Y27200 UFS AUFS 812 Aniedung mude ned des US EZZ ercielit Abbidungen fe UFS 912 weihen ab de Bedienung be mog zum UFS EAF HATHREIN Antennan Electronic Currently these instructions are only available in German 165 Operation Without the Remote Control If you have misplaced your remote control or if the batteries are flat you can still operate your receiver from the front panel Backup operation Standby button KATHREIN UFS Sie _ There are four buttons on the front of the receiver on off standby button on off The on off button allows the receiver to be switched On operation and Off again stand by mode Media buttont Using the Media button can display and hide the media centre TV R button You can change between the TV and the radio mode using the TV R button Channel down The channel down button switches to the next channel down in the currently selected channel list Channel up The channel up button switches to the next channel up in the currently selected channel list After the receiver has been switched off and on again the last function to be selected is active Because there are no numbered buttons no password PIN protected functions can be displayed 166 Operation
46. Operating Manual Englisch UFS 912 ee ee ee oe ee se ow ee eee Sg ae ae Fa FPFF A i ae Fa d ARE a Fa FF F ra i gg ag gg gt pt ge Pas 2S Sf fF ra iff HDTV Satellite Receiver KATHREIN Antennen Electronic Preface Dear customer this operating manual is intended to help you make the fullest use of the extensive range of functions offered by your new satellite receiver We have tried to make the operating instructions as easy as possible to understand and to keep them as concise as possible To help you understand particular specialist terms that cannot be translated we have added a short glossary at the end of the manual The power switch is an environmentally friendly feature If you will not be using your receiver for an extended period you should use the on off switch to disconnect it from the power supply and save energy For shorter breaks you can use the remote control to switch the receiver to standby which uses only a minimal amount of energy We wish you good reception and hope you will enjoy using your new HDTV receiver Your KATHREIN team Difference Between PAL and HDTV The difference between PAL and HDTV High resolution TV is characterised by a significantly higher number of picture lines on the TV set The usual European standard PAL achieves a resolution of 576 lines vertically and 720 lines horizontally High resolution TV provides an impressive resolution up to five times higher than the usu
47. Ov qqH oiseg zepdN aemMyos uono s uonejjesu Buljoog a9eL19 U 1SJI4 dqQ 1eS pue azepdsy asemyos yoseas jauueyy ye dl4 H8S UOWWOY UONDBUUO4 99s o1Iyewo Ny o1lyewo ny UO E E SU S41 4 UOI D9IaS Benpue7 nu N sjauueuy 1s suoljeoddy QDIAIOS yoieas jouueYd ypa UO N fw OY Buissoid Aq dn jed nusw ulewp Menu overview 100 Main Menu Channel Search After calling up the menu you will see the following on screen display You have three different search options Automatic Channel Search Manual Channel Search Expert Channel Search Use the Lally buttons to select the desired search type and confirm your selection using the button Automatic Channel Search After calling up the menu you will see the following on screen display The alty buttons allow you to select different sets of parameters for the search Satellite You can now use the J buttons to select between the individual satellites you have set up or choose the setting All If Al is selected all the individual satellites you have set up will be searched for new channels Make sure your reception system is aligned to this these selected satellite s Channel Search Mode Use the lt gt buttons to select the type of channels that are to be searched for You have three options free amp scrambled All channels are searched for free channels only Only free to air
48. Precondition In the Settings User Defined Settings PVR Settings menu the Automatic Timeshift option must be set to On and the Default Record Duration selection must allow sufficient time for the timeshift recording 7 19 For this see also the sections Main Menu 7 19 Settings User defined settings PVR settings Function can be used only when the archive hard disk is connected and has been set up Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs 56 Basic Operation in TV or Radio Mode Live Operation One Touch Recording OTR recording directly to a hard disk To start recording directly to the hard disk press the o red dot button The following on screen display appears example Use the DM buttons to select the lines to be changed make the changes using the J gt buttons Recording You have the following selection options as from now Recording is performed from the present time later Recording begins at the start time entered in the Start line From start Recording is performed from the time since when the current channel has been watched without interruption option available only if automatic timeshift is activated see Automatic timeshift Start You only need to enter the start time for a recording if you have selected the
49. Signal Quality on the right of the screen show the highest available percentage values Once you have achieved the best reception signal select the Store actual Position field Store actual Position Once you have achieved the maximum signal strength and signal quality you can save the current position of the turntable for the above mentioned satellite using the button If you previously selected more than one satellite under Select Satellites you must now make this setting for the other satellites Switch to the Satellite and Position field and select the next satellite Repeat the set up of the turntable for this satellite as described above Once you have saved the positions of the turntable for all the selected satellites press the u button three times to exit the menu The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving 153 Tuner Configuration DiSEqC 1 3 The individual items are selected using the alty buttons If you need to access sub menus they can be called up using the button Changes to the current settings can be made using the J buttons or the number pad Motor Control Select the control type DiSEqC 1 3 For this refer to the documentation for your motorized antenna My Longitude Select the My Longitude field and use the number pad to enter
50. TV set can process FBAS video or RGB Red Green Blue signal or Y C S Video signal luminance chrominance VCR SCART Output Select the type of video signal at the VCR Scart socket here Select the signal that your external recorder can process FBAS video or Y C S Video signal luminance chrominance Auto Dolby Digital Output Here you can select whether the receiver should automatically output the Dolby Digital signal if this is transmitted 19 Connection and Setup The following on screen display appears The settings for the tuner configuration should be made by a specialist engineer for this reception system If your receiver is connected as in the connection example see illustration above only one change selection is necessary in the rest of the first installation If you are not familiar with the details of your reception system note the following In many cases the satellite reception system is a DiSEqC 1 0 system This type of system is preadjusted Confirm the current on screen displays using the green button You then select using the Lally buttons the required satellites in the satellite selection in Germany mostly ASTRA 19 2 East and confirm the selection using the button Confirm the rest of the on screen displays during the first installation using the O green button You cannot damage your reception system during this process If you do not receive a TV
51. able symbol rate Service ID Use the number pad to enter the service ID of the channel to be searched for Once you have performed all the settings use the Lalty buttons to switch to the Start Search selection field and confirm the start of the searching using the button Note You can cancel the search at any time by pressing the u button The following on screen displays during and in connection with the search are identical to those for the automatic search 106 Main Menu Service Menu After calling up the menu you will see the following on screen display You can choose between various different menus Automatic Software Update Software Update by Satellite Software Update by USB Factory Reset In addition the following information is displayed in the service menu under the Factory Reset option Operating software version currently in use on the receiver Date of the last update of the channel list Date of the last update of the receiver operating software Use the al v buttons to select the desired menu and confirm your selection using the button Automatic Software Update Select the required setting On Off using the lt gt buttons Setting Off The receiver does not automatically search for new software available every day when updating the EWW data and does not compare the channel list you have stored on the receiver with the delta channel list transmitt
52. al PAL standard TV and hence delivering more detail sharpness and responsiveness A HDTV picture can contain up to five times as many picture points that is approximately 2 million pixels compared to a conventional PAL picture with only approximately 400 000 pixels Worldwide there are currently two HDTV standards based on the two formats 1080i and 720p The two standards differ in the number of picture lines and in the transmission procedure To the human eye the difference between the two HDTV standards is hardly perceptible whereas in comparison to the PAL system moving pictures look much more dynamic in HDTV Transmission technology and reception equipment will be able to handle both standards in the future PAL 720 x 576 List of Contents Pre CE Seen rene es eee eee eee eee nee 2 Views using the EPG cccccsseeeeeeees 61 Difference Between PAL and HDTV 3 C WIG W aea envencmictenecenre nie 61 List of Contents cccccccsseeeeeeeeeeeeeeeees 4 IW NNO tea AMSG S eceteantenre ee ihe aen p Ea ma n 64 Receiver Features Scope of Supply 10 My hiN S atc cecete cess cts eosecctecee ce enone ctenceid ean 64 Receiver features 10 Search FUNCION siusisnrerisrisinriis inene ieai 66 Product PACK AGG sssssssissiiissrsisruisanain 10 More Episodes ccccccccceessssceseeeeeceesseeeeeeees 66 POATE S ose eet nesies ania 10 e a E E er 67 FOAtureS ccecceceeeeeeeeeeeeeeeeeeeeneeeeeeeneeeeeene
53. alling up the menu you will see the following on screen display You can choose between various different menus Parental Lock Customize Screen Menu EPG Setup PVR Setup Mediacenter Setup Automatic channel name update Use the Lally buttons to select the desired menu and confirm your selection using the button Parental Lock After calling up the menu you will see the following on screen display In order to access this menu you must enter the four digit PIN code factory fe setting 0000 i Se The following on screen display then appears In this menu you can set various restrictions parental controls The individual items are selected using the ajy buttons The changes to the current settings can be performed using the lt gt buttons or the numeric pad 120 Main Menu Settings Lock Mainmenu Select here whether the main menu should be locked If the main menu is locked the four digit PIN code will be requested when it is called up Without the four digit PIN code factory setting 0000 the main menu cannot be viewed and no changes can be made to the device settings Either Yes or No Lock Receiver Select here whether the receiver should be locked If the receiver is locked the four digit PIN code will be requested when it is switched on Without the four digit PIN code factory setting 0000 the receiver cannot be operated Either
54. also www kathrein de Service FAQs Calling up the recording archive The recording archive is called up by pressing the button or the button Each time the EPG is opened you will automatically be shown the view you had selected the last time you exited the archive The following on screen display appears example In this Preview window you are always shown the current programme on the last channel to be selected with the channel name After the start of playback of a recording instead of the channel name you are shown the title of the recording being played back Selected view sorting the recording archive A recording marked with REC is a recording that is in progress Information on the remaining storage capacity on the hard disk connected lt gt 2wei Arete sind ciner zu viel Wed 23 Jun Comecy Brisant List of the available Magazine Wed 23 Jun oa EIM a See GroBe O SH recordings using aml mil Date and time the sort order of the selected selected above and recording with the folders created category duration and picture format Ox At this point you will be shown any age restrictions for the highlighted programme if this is supplied by the channel provider Recordings which have not yet been viewed in part or in full are flagged as New see previous page As soon as part of the recording has been viewed the last screen of the recording before the playback s
55. ame for the new satellite Alphanumeric characters are entered as described in Operating instructions Alphanumeric entries Input Longitude Then switch to the Input Longitude field and use the number pad to enter the desired longitude Use the lt gt buttons to choose between E East and W West 129 Main Menu Settings Band Use the lt gt buttons to select the correct band for the new satellite When all settings have been made press the button to save the new satellite Delete Satellite Press the button to delete the currently selected satellite As a security feature you are asked to confirm again by pressing the button that you really want to delete the satellite Edit Satellite Name By pressing the button you can call up the input screen which allows you to change the name of the currently selected satellite Use the keypad to enter a new name for the satellite Alphanumeric characters are entered as described in Operating Instructions Alphanumeric entries Edit Transponder After calling up the menu you will see the following on screen display The individual items are selected using the Lalty buttons If you require to access submenus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The settings for transponders should be performed by a specialist e
56. an also press the blue button to select the desired category The list of categories is then displayed see screenshot right Select the required a category using the cursor AP buttons Confirm the selection with the button The receiver automatically returns to the Categories view a You can then use the cursor AP buttons to select the desired programme in that category and if available you can use the a button to view further information on the desired programme The gt button allows you to scroll backwards and forwards a day at a time Using the o red dot button you can copy the selected programme to the recording settings see Recording section Crime series Science fiction series TV Program Guide i a AA VOX m i AEE Junior l ned Thu F ice RTL Tel evision C Gute Zeiten schlechte Zeiten 4516 Ei ProSioben n b i How Met Your Mother 19 vrama series gt D t p Johi oben Schweiz m Wed E Golo der Gartenzwerg Peebles ProSicben Schwei How Met Your Mother 63 Premium tv twv EPG Extras menu The Extras menu is opened in the EPG by pressing the button In this menu you are offered the following additional sorting search facilities My hints Actors list The selection is made using the Lally buttons and confirmed by pressing the button My hints You can create your own categories within this section Press the butto
57. and then press the button The following on screen display appears example with a folder selected as the recording destination Now use the 4 v buttons to select To xxxx Record and then press the button The receiver then returns OF automatically to the recording settings Wednesday 30 06 2010 14 00 see example screen a Recording Archive Dokus You can now select the recording mode you want to use 71 Premium tv twv EPG Recording once Use the Ogn buttons to select the once recording mode see screenshot on the right Use the a v buttons to switch to the Date field and use the lt gt buttons to select the desired recording day Use the La lv buttons to switch to the selection field Start and use the lt gt buttons or the numeric pad buttons to select the desired recording start time Use the Lalty buttons to switch to the selection field End and use the lt gt buttons or the number pad button to select the desired recording end time When all settings have been made press the button to save the recording settings Recording daily Use the lt gt buttons to select the daily recording mode see screenshot on the right Use the ajy buttons to switch to the selection field Start and use the J buttons or the numeric pad buttons to select the desired recording start time Use the ajy butto
58. are Select Yes here if you want to install new software select No if you are satisfied with your old software version and the changes in the new software are not relevant to you Update channellist Select Yes here if you want to install the new channel list or No if you want to retain your old channel list Prior to this action you can however also save your old channel list using the Software Update by USB Save channel list on a USB device menu so that if you do not like the new channel list you can revert back to the old one If a new channel list is loaded this will be automatically regenerated after each factory reset Factory Reset see Service Menu Factory Reset Reset Channel List 109 Main Menu Service Menu Once you have made all the settings for updating your receiver switch to the Start Update field and press the button The receiver will now automatically start updating the components you selected Once the update is complete the receiver is re initialised and starts operation again Never turn off the receiver during the update process as otherwise you could lose the entire software You would then need to re install it in a workshop or using a PC and network cable You can use the Service menu to check whether the new software has been installed Follow all on screen instructions Check the time setting following a software update You can also d
59. automatically skip to the settings for the second satellite Now make the settings for the second satellite followed by the other selected satellites in the same way as described for the first satellite Once you have completed the settings for the satellites assigned the receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 28 Connection and Setup Motorized Antenna DiSEqC 1 2 DiSEqC 1 3 The individual items are selected using the Lally buttons If you require to access submenus they can be called up using the button The changes to the current settings can be performed using the J buttons or the number pad Press the O green button The following on screen display appears Select Satellites Here select up to max 64 satellites that a are in the signal Use the r buttons to select the satellite you want and confirm your selection with the button The selected satellites will be identified with a tick When you have completed all settings press the O green button 29 Connection and Setup Motorized Antenna DiSEqC 1 2 The following on screen display appears Motor Control 5 5 Select the control type DiISEqC 1 2 For this refer to the documentation for your motorized antenna Go to Null Position Select the Go to Null Position field Press the button to instruct the
60. ber pad DiSEqC Input Select the DiISEqC Input field Here you set the SatPos for the satellite displayed on the screen to match the configuration of your reception system You can choose between 1 1 1 2 and 2 2 depending on whether at Satellite selection you selected one or two satellites Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar If no connection can be established to the single cable system check your settings frequency and transmission channel and if necessary call for expert help When you have completed all settings for this satellite press the O green button The receiver will now save these values for this satellite and skips automatically to the setting for the next satellite Now make the settings for the second satellite in the same way as described for the first satellite Once you have completed the settings for the satellites assigned the receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 38 Connection and Setup OneCable System UAS 481 The individual items are selected using the Lalty buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using
61. ble Safety instructions multi lingual m 2 batteries AAA 1 5 V Features Reception of digital satellite TV channels and radio programmes using DVB S2 HDTV and DVB S transmission standards Video decoding of MPEG 2 and MPEG 4 H 264 signals HDTV 10 16 character alphanumeric display with status icons for indication of channel names and transmission information Premium tvtv EPG Electronic Programme Guide for up to 14 days detailed information on approx 60 channels Features Extended EPG functions Selective sorting by categories comprehensive search function generation and management of programme tips Facility for recording TV and radio broadcasts to an external USB hard disk Timeshifting using external USB hard disk Recording archive with chapter menu and images Multimedia archive for video and MP 3 playback Common interface for two CA modules 2 HDMI output for best picture quality on your flat screen TV set Upscaler for upscaling the PAL signal to 576p 720p 1080i and automatic Built in SD card reader Cinch sockets for AV signals composite FBAS stereo audio Two USB 2 0 ports at the rear of the unit for connecting external USB storage media One USB 2 0 port on the front of the unit for software update with a USB stick Ethernet interface for multimedia applications and integration of the receiver in a network UPNP support via the network interface for aud
62. button If available shows further information on the selected recording EB button Select recordings B pga law M o a a i PF KATHREIN Recording Archive Playing Back Editing Recordings a Navigation within each view of the recording archive is always performed using the cursor buttons EON The Lalty buttons allow you to select individual recordings and the lt gt buttons allow you to scroll from page to page in the currently selected list Pressing the or the button exits the recording archive and returns to the TV picture Views sorting the recordings in the recording archive When displaying the recordings you have the following sorting display options O green button Ordered by date you can use the aa buttons to choose between the sorting criteria of date title or duration recording length Recording Archive Wed 23 Jun 24 min Tue 8 Jun 35min f fodi OPT yellow button Ordered by channels you can choose between the available channels using the aa buttons Only those channels for which a recording is available are shown Recording Archive go ZDF p i cB Abenteuer Wissen Hoy Documentary Wed 26 May 35 min 87 Recording Archive Playing Back Editing Recordings TVR Ej blue button Ordered by categories genres you can choose between the available categories using the EI buttons Only those categories for which a recording is available are shown aed
63. button Changes to the current settings can be made using the Je buttons or the number pad Press the button to open the settings for the selected single cable system The following on screen display appears Nu Satellites m gt Satellite 1 19 2 E ASTRA gt Satellite 2 Not Installed Refer to the documentation supplied with your system for the settings for the SCR frequencies and any PIN assigned to the tuner You will find there a printed list showing the assignment between the various SCRs and the respective transmission frequencies It may happen that you cannot freely select the PIN for protection of individual frequencies this also may be listed in the documentation for the single cable components Please note also that multiple receivers cannot share the same frequencies channels the receivers would interfere with each other Secure channel with PIN If your single cable system allows the transmission frequency to be protected by entering a PIN this is the menu where that can be done No other receiver can then use this transmission frequency unless the PIN is entered Select the setting On You then have the facility of using the number pad to enter a PIN code 0 255 in the line underneath Tuner PIN code Tuner transmission channel Select a free available transmission channel SCR 0 SCR 7 Tuner SCR Frequency transmission frequency Select here one of the free available transmis
64. button again to gain access to the full text search The following on screen display appears see example on the right If necessary the last search expression used is offered Pressing the lt button allows you to delete your entry or a search expression provided by the receiver Search expressions are entered using the number pad as described in Operating Instructions Alphanumeric entries Pressing the button starts the search for your search expression You will then see a listing of all programmes that contain your search expression in their detailed information 68 TV Program Guide E AAE 2DFinfokanal ve oo nano Somme ProSieben Scrubs Die Anf nger 16 P AIEEE ProSieben Austria 11 20 Scrubs Die Anf nger 16 P a DEEN ProSieben Schweiz Scrubs Die Anf nger 16 AEE Discovery HD Matt Rogers fette Maschinen Premium tv tv EPG Recording settings programming the timer The o red dot button allows you to set a programme for recording at any time The programme to be recorded can be selected in any of the EPG views provided the o red dot button appears at the bottom of the on screen display Note You can set the automatic pre recording and post recording times for your recordings in the menu Settings User Defined Settings EPG Setup see also the User Defined Settings EPG setup sections Programme in the EPG Select t
65. cording directly to a hard disk 57 Start block selection nseennoenneenneerrrerrneerenen 84 Premium tvtv EPG a 58 Rename favoritelist cccccssssseeesssssseeeeeseens 84 Recording Archive Premium My EPG ser nm so Playing BacklEditing Recordings 88 Calling up the EPG 59 ln AR TEC ONG CIM etch eee ee Selection options Selection options remote control remote control buttons in the EPG 60 buttons in the recording archive 86 List of Contents Views sorting the recordings in the recording archive cccceseeeeee 87 Folders in the recording archive 88 Creating folders js scisiccsassaveenesteisdiccnectaeeneeoneecnneise 88 Editing folders delete rename c00088 89 Playback of a reCOrding cccseeeeeeeeeees 90 Playback functions cccceeeeeeeeeeeeeeeaeees 90 Creating chapters ccccceccceeseeeeeeeeeeeees 91 Selection of the recording s to be edited 92 Editing recordings cccsssecessseeeneeeeess 92 DEIGEN 93 Ee E E E E E T A E A 93 RENAME inanan ir 93 Change category ccccccssseseeceseeeeseseeeseeneeees 94 Create new folder cccceccecsseeeseeeeeeseeeeaeeees 95 Move to fOlder ccceceeeeceeececeeeeeseeeeceeeeeaees 95 Chapter VIGW orssccverserteideedonccenitetoseeesdene 96 Deleting Chapters cccccssccesseeseeeseeseeesnees 97 Main MenU sccs
66. ct the type of audio signal that is transmitted by the HDMI interface together with the TV picture Either Decoded PCM or S PDIF format Automatic Dolby Digital Output Here you can select whether the receiver should automatically output the Dolby Digital signal if this is transmitted Either Onor Off Audio Delay Here you can set a delay in milliseconds if the sound output from your receiver is out of synch with the TV picture lip synchronicity The delay can be adjusted in 10 millisecond steps from 10 ms up to 150 ms and then in further steps of 25 milliseconds to 250 ms 116 Main Menu Settings Time Setting After calling up the menu you will see the following on screen display The individual items are selected using the Lalty buttons Changes to the current settings can be made using the lt gt buttons ime Setup Channe Jas Erste HD Time Mode Here you can select whether the time information should be obtained by the receiver automatically from a specific channel that you select or whether the time information should be entered manually Either Automatical or Manual Local Time Offset Here you can select the local time offset to UTC formerly GMT e g 1 hour for Germany You can set the offset in 30 minute steps The maximum offset is 11 hours and 30 minutes and Clock Change Summertime Here you can select whether the receiver should automatically change over
67. cursor buttons r and called up using the button HENN Select the channel After selecting the desired channel list the desired channel is selected using a the cursor a buttons and called up using the button To exit the channel list and return to the TV picture press the button again or press the u button 51 Basic Operation in TV or Radio Mode Live Operation Channel information Channel information is shown for a few seconds each time the channel is changed this can be changed under Settings User Defined Settings Customize Screen Menu or displayed continuously by pressing the a button Selected Channel slot from selected channel DVB subtitles favorites list favorites list and channel name in case available of encrypted channels a key symbol is displayed before the channel name 7 Current time Indication of the selected soundtrack Start time for the Current programme current programme top and next top and for caer programme bottom Teletext programme bottom available The following icons symbols may appear in the channel information Broadcast transmitted in Audio selection is HDTV standard 1080i Stereo In HDTV standard 720p Subtitles are available transmission broadcast Portal channel Pra channel options available TIGIX is av allanle Dolby Digital Receiver registers the programme as soundtrack selected a live broadcast Audio selection i
68. d Press the button to enter the required low high and limit frequencies The entry is made using the number pad 144 Tuner Configuration Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite press the button twice The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving DiSEqC 1 0 The individual items are selected using the Lally buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The following on screen display appears Number of Satellites Use the lt gt buttons to select how many satellites max four you would like to receive with your reception system Use the al v buttons to select the line Satellite 1 and press the button to open the settings for the first satellite 145 Tuner Configuration The following on screen display appears Satellite and Position Press the button to display the on screen display with all the pre programmed satellites Use a the at buttons here to select the first satellite from which the signal is present at the tuner an
69. d press the button to confirm your selection LNB Type If your reception system does not have a Universal LNB press the button so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple or User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Select the frequency range to be changed and set the values that are correct for your LNB using the J buttons or the number pad When you have completed all settings press the button DiSEqC Repeat The setting for how often the DiSEqC command must be repeated depends on the configuration of your reception system Refer to the documentation for your reception system or seek assistance from a specialist engineer Off DiSEqC command is not repeated 1 DiSEqC command is repeated once 2 DiSEqC command is repeated twice or 3 DiSEqC command is repeated three times 146 Tuner Configuration Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have
70. d Set Up First Installation Basic Settings After calling up the menu you will see the following on screen display You can choose between various different menus Video Settings Audio Settings Time Setting Remote Control Code Use the al v buttons to select the desired menu and confirm your selection using the button 113 Main Menu Settings Video Settings After calling up the menu you will see the following display depending on the selected signal output For output of the TV picture via the HDMI output For output of the TV picture via the Scart TV output The individual items are selected using the Lally buttons Changes to the current settings can be made using the JP buttons When doing this refer to the operating instructions for your TV set Video Output via Select here the connection on the receiver to which you have connected your TV set Either HDMI YUV see also note on the next page HDMI YUV Resolution Here you can select the picture resolution that will be sent to the TV set Either 1080i resolution 1920 x 1080 half screen images 576p resolution 720 x 576 full screen images 720p resolution 1280 x 720 full screen images or Automatic 114 SCART TV Aspect Ratio Select here the picture format for your TV set Either 4 3 or 10 9 Picture Format Select here the type of screen display depending on the setting
71. der Frequency Use the J buttons transponder frequency already saved or the number pad transponder frequency not yet saved to select the transponder frequency on which the channel being sought is transmitted By pressing the button at this point you can view a list of the saved transponders a for the selected satellite Use the at buttons to select the transponder you want and confirm your selection with the button At the bottom right of the on screen screen display the receiver shows the current signal strength and signal quality of the selected transponder The DVB Type FEC Polarisation and Symbol Rate options only need to be specified if the transponder has yet to be saved DVB Type Press the aj buttons to select whether you want to search for standard channels DVB S SD or for HDTV channels DVB S2 HDTV Error rate Press the lt gt buttons to select the applicable error rate Viterbi rate When searching for DVB S SD transponders you need not state the error rate Instead a fixed display of Automatic appears When searching for DVB S2 HD transponders you must state the correct error rate Either QPSK 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 or BPSK 2 3 3 4 3 5 5 6 8 9 or 9 10 105 Main Menu Channel Search Polarisation Press the aj buttons to select the correct polarisation horizontal or vertical Symbol Rate Use the ED button or the number pad to enter the applic
72. diting the Channel List s0008 78 Live Operation cccscseseseeeeeseeeeeees 48 Calling up the Edit TV Channellist Remote control for live operation MENU onma sag eceoeencatentacaceaeseus sa ecenetecaeee 78 Ra a 48 Selecion Or Me channel lsutavorites Changeover between TV and Radio list to be edited 0 ccc eeeeeeeeeeeeseeeeees 19 Operation exer becevaivtmespvactnscionaanediaorenreeetse 49 Selecting the channels to be edited 80 Setting the VOIUME nsise 49 Editing channels channel lists 80 Channel selection occcccccceceececeeeee 49 MOVE rcciuteaetourtntsdasie trean eN EEEIEE 81 Direct channel selection a 49 DE Ei E E TA AA EE 81 Channel selection iraniite channel liet sc 50 NU oe eases seeds cece nie ce 81 Channel information 52 LOCK reen a eE AA E ASEE 82 Calling up channel options e ceeee 53 To PAV OMG tescdoregetcenescocurisuncezenicctiecdesentensebeiceda 82 Select Audio track ccccccccccceeeeee 5A Start BlockSeleCtiON cccececeesseneeseeeeeseeeeees 83 Subtitle selection 0 cccceeeeeeeeeeeeeeees 54 Editing channels favorites lists 83 aras 294 OO 55 WOVG vnccrsutsdhatnontestagzeitondosesmatwebssnsemendiaeedeseshiuceads 83 Automatic timeshift 56 Remove from favoritelist ccccccssesseeeeeeees 83 One Touch Recording OTR LEG o gecoes encom A TA AE A E AATE 84 re
73. e buton This stops playback playback can be resumed either by pressing the pause button again or by pressing the play button This displays the playback info with elapsed and remaining iio bunton Ta times and the channel info plus title genre etc for the recorded a programme see screenshot on the next page To hide the playback info again press the i button twice This displays the info text recorded with the programme To hide the info text again press the i button again Available fast forward speeds 2 4 8 16 and 32 times Each time the Fast forward fast forward button is pressed the fast forward speed increases another button step Pressing the rewind button reduces the fast forward speed step by step Press the Play button to return to the normal playback speed Available rewind speeds 2 4 8 16 and 32 times Each time the Rewind button rewind button is pressed the rewind speed increases another step Pressing the fast forward button reduces the rewind speed step by step Press the Play button to return to the normal playback speed This stops playback or fast forward rewind and the receiver automatically Stop button i skips back to the recording archive Cursor button Each time the cursor button up arrow is pressed the playback point up arrow in the recording skips one chapter forwards Cursor button Each time the cursor button down arrow is pressed the playback point down arrow in the recordin
74. e current settings can be performed using the j gt buttons or the number pad The settings of the satellites should be performed by a specialist engineer for the respective reception system Only make these settings yourself if you are fully familiar with the particulars of your reception system Satellite Name Select here the satellite that you want to edit delete or whose name you want to change By pressing the button at this point you can view a list of the satellites saved in the receiver Use the cs aurons to select the satellite you a z Select Satellite gt want and confirm your selection with the button 128 Main Menu Settings Frequency Select here the desired transponder By pressing the button at this point you can view a list of the transponders saved in the receiver for this satellite a Use the r buttons to select the transponder you want and confirm your selection with the button Symbol Rate The symbol rate is positively assigned to each saved transponder and cannot be changed Polarisation The polarisation is positively assigned to each saved transponder and cannot be changed Satellite Longitude A fixed longitude is assigned to each saved satellite and cannot be changed New Satellite By pressing the button you can call up the input screen to save a new satellite The following on screen display appears Satellite Name Use the number pad to enter a n
75. e data NIT The channel identification number is also referred to as the Network ID or NIT NTFS File system for storage media 179 Short Technical Glossary OSD On Screen Display Displays by the receiver on the TV screen e g main menu PAL Analogue TV standard Pay TV Television channels available on subscription e g Sky Encrypted transmitters which can be decrypted only by using the appropriate smart card As a rule these services are subscription only PID The PID Packet Dentification number is an identification number for video signals and audio signals in the digital data stream of DVB MPEG 2 signals The receiver uses the PID number to create a unique assignment for the video and audio data transmission The PCR PID is the identification number for the synchronization signal The PID PCR is normally identical to the video PID For programmes broadcast in multiple languages the audio PD can be entered manually to assign a different language to the TV programme After the PID is entered the digital receiver automatically selects the audio data identified by the PID number from the data stream and assigns it to the video signal PIN Personal Identification Number For this unit the PIN is a 4 digit numeric code which must be entered to unlock the unit to allow access to certain functions and channels Polarisation The individual transponders on satellites transmit on two different polarisa
76. e no naked flames such as candles on top of the unit heat There is a risk of fire Batteries If your unit was supplied with batteries e g for the remote control take care that the batteries are not exposed to excessively high temperatures direct sunshine or fire Exchange the batteries only with types that are identical or equivalent Otherwise the batteries and also the remote control may be damaged Comply also with the safety instructions stated on the batteries There is a risk of explosions Ventilation The heat generated in this unit is adequately dissipated However the unit should never be installed in a cupboard or on shelves with inadequate ventilation Never cover the cooling slots on the unit e g with other equipment magazines tablecloths clothing or curtains Important Safety Instructions Important Notes Do not place any objects on top of the unit Unless stated to the contrary in the Connection and Set Up and Installation sections in the manual supplied maintain a clearance of at least 10 cm above the unit 2 cm to either side and 5 cm behind the unit to allow unobstructed dissipation of the heat generated There is a risk of fire Repairs Ensure that any repairs to your unit are carried out by qualified personnel Opening the unit and attempting to repair it yourself voids all warranty claims Improper work on the unit may jeopardise the electrical safety
77. ears Select Satellites Here select up to max two satellites that a are in the signal Use the r buttons to select the satellite you want and confirm your selection with the button The selected satellites will be identified with a tick If you use a UAS 481 single cable LNB in your reception system you are only allowed to select one satellite When you have completed all settings press the O green button Continue as described in the first installation for the type of single cable reception you selected 36 Connection and Setup One Cable System EXR EXU User The individual items are selected using the Lally buttons The changes to the current settings can be performed using the J buttons or the number pad Refer to the documentation supplied with your system for the settings for the SCR frequencies and any PIN assigned to the tuner You will find there a printed list showing the assignment between the various SCRs and the respective transmission frequencies It may happen that you cannot freely select the PIN for protection of individual frequencies this also may be listed in the documentation for the single cable components Please note also that multiple receivers cannot share the same frequencies channels the receivers would interfere with each other Secure channel with PIN If your single cable system allows the transmission frequency to be protected by entering a PIN
78. eceiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 25 Connection and Setup DiSEqC 1 1 The individual items are selected using the Lally buttons If you require to access submenus they can be called up using the button The changes to the current settings can be performed using the J buttons or the number pad Press the O green button The following on screen display appears Select Satellites Here you can select the available satellites max 64 in the signal Use a the ra buttons to select the satellite you want and confirm your selection with the button The selected satellites will be identified with a tick When you have completed all settings press the O green button 26 Connection and Setup The following on screen display appears Satellite Configuration Make the settings for the first satellites here LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Simple or User defined LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined On this aspect also refer to the documentation supplied wit
79. ecorded recorded autoriatically Sasson 1 Limit recording start from to In these two fields you also limit the time during the day to avoid the recording or repeats e g from 17 00 to 19 00 to avoid a repeat at 23 00 The settings Avoid repeat episodes and Record only this scale can only be made if the programmes are appropriately marked by tvtv or the broadcaster season and episode number If this is not the case you can only make settings for the selection Limit recording start from to Press the button to make the Further options settings and then the button again to save the recording settings 74 Premium tv tv EPG Instructions for recording a series If the Series recording function is used to program recording of every edition or episode of a series the EPG will locate the series in question on the updated schedules and automatically program the recording of them A change in the time the series is broadcast is no problem for the EPG as its programming is based on the series title This does however mean that the schedule change needs to have been notified prior to the last update of the EPG Only programmes are recorded that are on the channel from which you programmed the series recording The series recording does not work across channels Reminder function switch over to programme If you want to be reminded that a programme is about to start you can activate the reminder func
80. ective 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27 January 2003 concerning used electrical and electronic appliances At the end of its service life take this device for disposal at a designated public collection point Spent batteries are special waste Do not throw spent batteries into your domestic waste take them to a collection point for spent batteries Safety Instructions Important Notes Channel assignment The channels available on the satellites and transponders are subject to continual change If changes do occur the new channels have to be set on the receiver because the factory preset programming corresponds to the status on the date of manufacture The information for these settings can be found on the Internet or in relevant magazines Updating the receiver software Your receiver was equipped in the factory with the latest software version at that time We are however constantly working on and adapting the software to the wishes of our customers and to developments in technology Further information on this can be found in the sections Main Menu Service Menu Software Update Network function To connect the PC laptop and receiver to the network you must have unrestricted rights administrator rights for your PC laptop and on your network For this refer to the section Main Menu Interfaces Ethernet Settings Product return original packaging Please k
81. ed However you can perform a software update manually at any time as described under Software Update Setting On The receiver automatically searches for new software available every day when updating the tvtyv data and compares the channel list you have stored on the receiver with the delta channel list transmitted Your channel list is not overwritten only updated For example if the name or frequency of a channel changes the old parameters for the affected channel are replaced by the new ones in your channel list on the receiver The channel is not moved in the channel list New channels that have not yet been saved in your channel list are added to the end of the list Channels that are no longer broadcast are deleted Note The receiver does not make the changes automatically without your approval they are buffered until the next time the receiver is started 107 Main Menu Service Menu If new software or changes to the channel list are found you will see the following on screen display the next time you start the UFS 912 the original on screen displays may vary from these example screenshots Press the button to perform the software update After the software update you will see the following on screen display only if there are any changes to the delta channel list Press the button to perform the channel list update or the ace button if you do not want to update your channel list The channel l
82. ed at the same time using the a a q E cursor tf buttons and select each further recording using the EB button see example screenshot on the right To select several recordings that are listed directly following each other in the recording archive you can start block selection see Editing recordings Start Blockselection Editing recordings After selection of the recording s to be edited press the o red dot button The following on screen display appears see screenshots on the right Change category Movie Create new folder Start Blockselection only appears if just one Copy to LE enie recording has been selected for editing 92 Recording Archive Playing Back Editing Recordings Delete Deleted recordings are irrevocably deleted and can only be restored by re recording the programme Use the Lally buttons to select Delete and confirm your selection with the button The selected recording s will be deleted Lock Use the ajy buttons to select Recording Archive Lock and confirm your selection with D Dokus Folder the button In order to activate a ie District Einsatz in Washington 70 the lock you must enter your four digit BEE ae PIN code factory setting 0000 E Magazine Wed 23 Jun 24min The following on screen display appears see example screenshot on the right The locked recording is displayed in X the recording archive wi
83. eep the original packaging in case you need to return the product at any time The receivers are fragile due to their construction and are only adequately protected by the original packaging If the receiver is not shipped correctly the guarantee warranty on it will be voided Software changes use of applications Any modifications to the receiver software or the use of applications not provided by Kathrein will invalidate the warranty You will have to bear the costs yourself for shipping and repairing any receiver that requires attention due to modifications to the software and use of applications other than those provided by Kathrein Therefore exclusively use only software and applications provided by Kathrein for your receiver These are available by downloading from the satellite or from our Internet pages www kathrein de Ventilation slots on the unit Make sure that the ventilation slots on the unit are not covered in any way Otherwise the unit may overheat b There is a risk of fire Safety Instructions Important Notes Switching the receiver off Before you switch the receiver using the power switch you must switch the remote control into standby mode by pressing the standby button Qi In standby mode any changed or new data that are broadcast will be saved by the receiver Once the receiver is in standby mode it can be fully switched off at any time at the power switch on the rear of the unit Do not switch the recei
84. ees 11 Keyword search in detailed information 67 Connection and Setup cccccceecseeeeeeees 12 Full text SCAN GI iecticnecaseisneccereveccnsinciscecoeiectent 68 View of rear panel seeen 12 Recording settings View of front panel flap folded down 13 programming the timer c cecceeeeeees 69 Connecting the unit Sat IF connections 14 Setting the storage location for recordings 71 Connection example cccccceccecsesesseeere 15 Recording ON CO sictccieinictad atewnawiantaseetunedintiniens 72 TV and video recorder connection 16 Recording daily ccccinniatintanicniataniaatipaetaiiamaantanend 72 Audio connection cccccccccccccceeeccccee 16 Recording WEEKIY ciccsnsncvtdiaantiicatamineactiniccuatiotant 73 Optical digital OUtDUt ccecccceeseeseereeees 16 Recording user defined ccccccsseeeeeeeeeees 73 Inserting batteries into the remote control 16 SENES recordi sxsrcctiesnctebveoratantemnemetabcconct atent 74 First instalation x tcscceccssvidayctudonanivaistowced 17 Reminder function switch over to General Operating Instructions 46 programme SPEE A D EEEE ETE 75 Alphanumeric entries auasi 46 WEN list CEN EA EE PE EE A 76 Editing and selection options in the Editing a recording xicctenccrstseteotsesayertebiceenecee T7 Ae n 47 Timer OV GHIA DB scccs ccnzrseepesemccusacereneendtanarein 77 Basic Operation in TV or Radio Mode E
85. el list on a USB device 111 Scope of supply 10 Search function 66 Select subtitle 54 Selecting the channel list favorites list to be edited 79 Series recording 74 Service 182 Service menu 107 Setting the remote control code 118 Setting the storage location for recordings 71 Setting the volume 49 Setting up the archive hard disk 43 Settings 113 Short technical glossary 178 Simple LNB 144 Simple MP3 mode 126 Single cable systems 172 Skip 81 Sleep timer 122 Software update by satellite 109 Software update by USB 110 Software updating via the USB port 167 Soundtrack selection 54 Start Blockselection 83 Start FTP on booting 141 Start screen EPG 124 Start UPnP on booting 141 Switching between TV and radio operation 49 T Technical appendix 169 Teletext 55 Time setup 42 Timer list view 76 Timer overlap 7 Tuner configuration 20 128 143 TV and VCR connection 16 U UAS 481 160 Update channel lists 111 User defined settings 120 V Video output via 18 Video settings 114 View of front panel flap folded down 13 View of rear panel 12 Views sorting the recordings in the recording archive 87 Views using the EPG 61 185 186
86. ere the view that you generally want to see at the start of the EPG You can choose between the Current view and the Preview programme listings view Pre Recording Time Select here the number of minutes before the time set in the EPG at which the recording should start You can choose a value between one minute and 30 minutes in one minute increments The recording will start that number of minutes before the due time This allows a contingency for small variations in transmission times Post Recording Time Select here the number of minutes after the time set in the EPG for which the recording should run on You can choose a value between one minute and 30 minutes in one minute increments The recording will stop that number of minutes after the due time This allows a contingency for small variations in transmission times 124 Main Menu Settings PVR recording Setup After calling up the menu you will see the following on screen display The individual items are selected using the Lalty buttons Changes to the current settings can be made using the lt gt buttons Automatic Timeshift Select here whether automatic timeshifting is enabled or disabled If this setting is set to On the receiver automatically in the background starts recording the programme you are viewing as soon as you switch to the channel Then in manual record mode you can decide whether to record the programme from the
87. erformed using the J buttons or the number pad Press the O green button The following on screen display appears Select Satellites Here you can select up to four available a satellites in the signal Use the r buttons to select the satellite you want and confirm your selection with the button The selected satellites will be identified with a tick When you have completed all settings press the O green button 23 Connection and Setup The following on screen display appears Satellite Configuration Make the settings for the first satellite for tuner 1 here LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Simple or User defined LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined Refer to the documentation supplied for your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the number pad DISEgC Input 10f4 For the first satellite on the tuner item A on the system 2of4 For the second satellite on the tuner item B
88. ete and confirm your action with the button The selected chapters will be deleted The sections of the recording assigned to these chapters are assigned to the preceding chapters that were not deleted Deleting chapters even if all chapters in a recording are deleted does not alter the recording in any way 98 Main Menu Calling up the main menu and introduction The main menu is called up by pressing the button The following on screen display appears The programme showing on the currently selected channel always appears in the top right hand corner of the main menu The selected menus sub menus and items and also the parameters to be set are each marked in colour Always pay attention to the bar at the bottom of the on screen display This provides information about the next action edit step The sub menus are selected using the Lalty buttons and called up using the button Use the Lally buttons to select the submenu items The settings of the various parameters in the individual items are made using the J buttons or the number pad The main menu and sub menus can be exited step by step using the button Press the button to return directly from one of the menus to the TV picture 99 a 1aeS 9 euu zuy Buljoog je s6ul j39S spulas gsn Aq di 891A19S dudn H8S u1 4 3 pauyeag 1 SN ayepdp aiemyos yz m yoJe s Main Menu yoieas jouueyy jenuel yuowabeuey sBHulyjas ayyjayes Aq ywq G
89. etting is 0000 140 Main Menu Applications Any modifications to the receiver software or the use of applications not provided by Kathrein will invalidate the warranty You will have to bear the costs yourself for shipping and repairing any receiver that requires attention due to modifications to the software and use of applications other than those provided by Kathrein Therefore you should use exclusively software and applications provided by Kathrein for your receiver This is available by downloading from the satellite or from the Internet www kathrein de This menu displays applications that are installed on your UFS 912 This menu allows you to start and stop these applications To do this follow the instructions displayed and the explanations on the menu Applications The Applications menu is called up from the main menu First press the button and then use the a Y buttons to select Applications and press the button to confirm and call up the menu The following on screen display appears example Use the 4 v buttons to select the setting to be changed and make the changes using the lt gt buttons Start FTP at Booting Here you can select whether FTP is to be activated when starting the receiver 4GB Limit Here you can select whether the 4GB file limit required for FAT32 partitions is to be activated deactivate If this limit is switched off recordings can be
90. ettings for your network as required IP Address field and confirm by pressing When you have completed all the settings switch back to the Save field and press the 2 button the button to confirm Your DHCP server now indicates the IP address to the receiver AS soon as the receiver has received its IP address from the DHCP server and the IP address is displayed switch to the Save field and confirm by pressing the button lf with the DHCP On setting no connection can be established between the receiver and DHCP server Configuration example Receiver IP address 192 168 1 16 Subnet Mask 255 255 255 0 router switch the setting to DHCP Off and make the setting as described for DHCP Off PC Laptop IP address 192 168 1 10 Subnet Mask 255 255 255 0 139 Main Menu Interfaces CI hard disk and network Note Refer to our network function connection examples at the end of this manual and the instructions on this subject available on the Internet under www kathrein de Service gt Software and Downloads Receiver UFS 912 When connecting the receiver to a suitable FTP program note the following User name root Password 0000 You require both of these components to obtain access to the receiver via your FTP program The password is the receiver s PIN code This is set in the Parental Lock menu The factory s
91. ew view can be called up at any TV Program Guide a OPT time in EPG by pressing the yellow button Zwischen Europa und Asien 3 Bedrohte Tiere 2 Es war einmal Die Entdeckung unserer W In the Preview view you will see all Scarface und der Hundefl sterer Die R ckkehr der wei en W6lfin the programmes that will be shown Traumhafte K sten on the channel previously selected in ARTE Journal _ Mini Max oder Die unglaublichen Abenteue the Current view Provided that EPG L Mini Max oder Die unglaublichen Abenteue data have been supplied transmitted by eens EVTV or by the channel provider the receiver displays the programme lists for two weeks in advance a You can use the cursor Ae buttons to select the desired programme and if available you can use the La button to open further information on the desired programme You can use the aa buttons to scroll through the programmes in the order of the overall list of programmes programmes can also be selected by entering digits with the i l number pad you remain however in eee t 5 MDR Th ringen l Preview mode hr fernsehen __ SR Fernsehen _ rbb Berlin arte HD ANIXE HD OPT You can also press the yellow button to select the desired channel The overall channel list is then displayed see screenshot right Use the cursor buttons 4 AP to select the desired channel Confirm the selection with the button The
92. fies you that the editing options in the Edit channel list menu can be called up using the o button G d i ee lock etc press the record key If you do not want to see this notification again when next you call it up press the om button If you want to restore this notification when you next call up the Edit TV Channellist menu press the button 78 Editing the Channel List In the following section we have chosen to use the first option to explain the editing of the channel lists Selection of the channel list favorites list to be edited Now use the relevant coloured button to select the desired channel list category refer to the Basic Operation in TV or Radio Mode Live Operation Channel selection from the channel list sections for details The following on screen display appears example Live picture from the selected channel Currently selected Currently selected Call up the channel list channel complete list ia green button J Signal T 55 MDR S Anhalt w strength Channel list 455 MDR Sachsen O Z O SO o in and S PIJA NDRFSSH d LJ NDRFSHH oooO eer quality Be NDRESMV ie Call up the 0 favorites lists a CJl WDR Bielefeld E midis ve WDR Bonn eI FAV Jj WDR Dortmund E E red button i PIL WDR Duisburg E i ye WDR D sseldorf Call up sorting by satellites new channels and last search Select Call up alphabetic Channel data
93. for checking whether your settings are correct using the signal strength bar and signal quality bar If no connection can be established to the single cable system check your settings frequency and transmission channel and if necessary call for expert help If you previously selected two satellites under Number of Satellites you must now make these settings for the second satellite Switch to the Satellite 2 field and make the settings in the same way as for the first satellite 159 Tuner Configuration When you have completed all settings for the satellites press the button twice The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving UAS 481 The individual items are selected using the Lalty buttons If you need to access sub menus they can be called up using the button Changes to the current settings can be made using the AJ buttons or the number pad Press the button to open the settings for the selected single cable system The following on screen display appears For the settings please refer to the documentation with the UAS 481 No frequency can be used by more than one receiver The receivers would interfere with each other Tuner transmission channel Select a free available transmission channel SCR 0 SCR 3 Tuner SCR Frequency transmission frequency This setting is
94. g skips one chapter backwards Cursor button Each time the cursor button right arrow is pressed the playback point right arrow in the recording skips 30 seconds forwards Pav huton Pressing the Play button reverts from fast forward rewind mode or y from pause mode to normal playback and or shows hides the progress bar 90 Recording Archive Playing Back Editing Recordings Cursor button Each time the cursor button left arrow is pressed the playback point left arrow in the recording skips 30 seconds backwards BR Fav red button Call up chapter view close chapter view Opt yellow Call up option selection sound selection subtitles HDMI YUV button Resolution Call up the recording archive during playback The playback continues OK button l to run in the preview window red dot button Creating chapters You will see this on screen display after starting playback of the recording in full screen mode or by LuLu Gro e Oper pressing the a button once You will see this on screen display during all types of fast forward rewind or by pressing the EB button or p button Creating chapters To create a chapter during playback of a recording press the o red dot button The receiver will automatically assign a chapter mark to the current position To view the chapters you have created in a recording press the m red button see Chapter view section during i Chapter4
95. gain starts the search for your keyword You will then see a listing of all programmes that contain your keyword in their detailed information TV Program Guide e GT Bayerisches FS S d Sturm der Liebe ieee ORF2 HD 11 00 11 50 edThu Fri Sat Sur EJ Sturm der Liebe Ao R Cas Erste HD 15 05 15 55 si Sturm der Liebe 1096 E ce ORF2 HD 15 10 16 00 es Sturm der Liebe 1096 20ap Sturm der Liebe 1096 eA ice rob Berlin 07 45 08 35 Sturm der Liebe 1096 TV Program Guide 15 05 15 55 Series 2010 With Sepp Schauer Joachim L tsch Isis Kr ger Director Dieter Schlotterbeck Anschuldigungen dementiert und st rzt ihn damit in einen Gewissenskonflikt Wahrend Werner gegeniiber Charlotte frohlockt dass G tz schon bald das Mandat als Barbaras Verteidiger aufgeben muss mobilisiert G tz Barbara um auf Ben einzuwirken In einem aufw hlenden Telefonat n i dem Staatsanwalt TV Program Guide Das Erste HO 15 05 15 55 Series 2010 With Sepp Schauer Joachim L tsch Isis Kriger Director Dieter Schlotterbeck 1095 Soap G tz verl n dass er Astrids Anschuldigungen dementiert und st rzt ihn damit in einen Gewissenskonflikt W hrend Werner gegen ber Charlotte frohlockt dass G tz schon bald das Mandat als Barbaras aufgeben muss mobilisiert G tz Barbara um einem aufw hlenden Telefonat 67 Premium tv twv EPG Full text search After calling up the search function press the
96. h your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the number pad Uncommitted Switch Set the Uncommitted Switches here to match the configuration of your reception system You can select Off or a value between 1 and 16 in single unit increments DiISEgC Repeat The setting for how often the DISEqGC command must be repeated depends on the configuration of your reception system Refer to the documentation for your reception system or seek assistance from a specialist engineer Off DiISEqC command is not repeated 1 DiISEqC command is repeated once 2 DiSEqC command is repeated twice 3 DiSEqC command is repeated three times 27 Connection and Setup SatPos Select the field SatPos Set the SatPos here to match the configuration of your reception system You can choose between Off or a value between 1 and 4 in single unit increments Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite press the O green button If you have selected more than one satellite max 64 the receiver will
97. hat the network cable is connected at the receiver clicked home cross over correctly PC and Consult an antenna specialist to have it checked and repaired as necessary Check the settings made in the Settings Antenna amp Satellite Tuner Configuration menu and change them if necessary Set infrared code 1 as described in this manual under Mainmenu Settings Basic settings Setting the remote control code check the batteries Check summer time in the Settings Time Setup menu and change it as necessary Use the power switch to switch the receiver off from the current channel e g Das Erste or ZDF wait 10 seconds and then switch it back on Consult your antenna specialist Keep pressing the 0 button until the TV picture reappears on the screen Refer to your PC or network specialist Technical Appendix Technical Specifications UFS 912si UFS 912sw Order no colour 20210147 silver 20210148 black RF section Sat IF band MHz 950 2150 Input level band dBuV 44 83 Modulation FEC demultiplexer DVB S DVB S2 standard Video resolution CCIR 601 720 x 576 lines 576p 720p 1080i Video decryption MPEG 2 MPEG 4 compatible Input data rate MSymb s 2 45 30 for DVB S2 8PSK S N dB gt 53 TV system audio Decryption AC 3 MPEG 1 Layers 1 2 and 3 Sampling rate kHz 32 4
98. he LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the number pad 34 Connection and Setup Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite press the O green button The receiver will now save these values for this satellite and skips automatically to the setting for the next satellite If you have selected more than one satellite the receiver will automatically skip to the settings for the second satellite Now perform the settings for the second satellite followed by the other satellite selections in the same way as described for the first satellite Once you have completed the settings for the satellites assigned the receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 35 Connection and Setup One Cable System Use the la i buttons to select the single cable system used in your reception system Either One Cable UAS 481 one cable LNB or One Cable EXR EXU User Confirm your selection with the button The selected single cable system will be identified with a tick Press the O green button The following on screen display app
99. he desired programme and press the EJ red dot button The following on screen display appears see example screenshot on the right Use the lt gt buttons to select the desired recording mode The following recording mode options are available Once The recording will be performed once TV Program Guide Oo BRaipha Ofte 10 00 10 30 11 00 11 45 PALI 12 05 13 00 13 45 14 15 Der Bauch von M nchen Der Top Tipp Tagesgespr ch alpha Forum o Der Nationalpark Lagodechi in Georgien Sehen statt H ren rE T OE Daily The recording will be performed daily at the time you specify Weekly The recording will be performed once a week on the same day and at the same time User defined The recording will be performed on days specified by you at times specified by you Series recording The selected programme will be set up by the EPG for recording every time it is broadcast may even be on different channels However this function requires an update of the EPG data the update time for the EPG can be specified in the Settings menu User Defined Settings EPG Setup Reminder function See Reminder function switch over to programme section in this section Use the cursor om buttons to select the further items and use the number pad to complete the settings When all settings have been made press the button to save the recording settings You can
100. he i green button and continue with the section Time Setup gt All Channel Search Moda a ae Sa bled If you want to perform a channel search use the lt gt buttons to select Yes The following on screen display appears Country Select Using the lt gt buttons you can select whether the channels found after the search are to be sorted using a factory channel list for the selected country Currently this feature is only available for Germany Austria and Switzerland Satellite You can now use the lt gt buttons to select between the individual satellites you have set up or choose the setting All If All is selected all the individual satellites you have set up will be searched for new channels Make sure your reception system is aligned to this these selected satellite s Channel Search Mode Use the lt gt buttons to select the type of channels that are to be searched for You have three options free amp scrambled All channels are searched for free channels only Only free to air channels are searched for scrambled only Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant Pay TV provider 40 Connection and Setup Network Search Use the J buttons On Off to select whether a network search sh
101. hed setting Channel or whether after a short display after changing channel the time should be should continuously in the front display setting Time EPG Setup After calling up the menu you will see the following on screen display The individual items are selected using the Lally buttons The changes to the current settings can be performed using the J buttons or the numeric pad EPG Grabbing Select here the data with which the EPG should be updated filled In order to exploit the full capability of the Premium tvtv EPG this setting must be tvtv If the setting is SI the EPG will be filled with the conventional SI data broadcast by the transmitters These are less comprehensive than the tvtv EPG data and also do not extend to 14 days ahead With the setting Off the EPG is not updated at night 123 Main Menu Settings EPG Grabbing Time Select here the time at which the receiver s EPG data should be updated Since updating can take up to 45 minutes it is recommended that the grabbing time should be during the night when the receiver is not being used The receiver which must be in standby mode switches itself on out of standby mode and updates the EPG data After updating the data the receiver switches back to the standby mode Scheduled recordings do not affect this the receiver then carries out the update automatically later when recording is finished Start View EPG Select h
102. hey can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The following on screen display appears Use the lt gt buttons here to select the control type to match your reception system Either DISEqe 1 2 DISEqe 1 3 Continue as for the explanation for the control type you have selected in this section DiSEqC 1 2 The individual items are selected using the ality buttons If you need to access sub menus they can be called up using the button Changes to the current settings can be made using the lt gt buttons or the number pad Motor Control Select the control type DiISEqC 1 2 For this refer to the documentation for your motorised antenna Go to Null Position Select the Go to Null Position field Press the button to instruct the turntable to move to its null position 150 Tuner Configuration Set Borders Select the Set Borders field In this menu you can set the borders for your turntable This is particularly necessary if the turntable has only a restricted range in which it can turn before striking an obstruction such as a wall or tree Press the button The following on screen display appears The following buttons allow you to control the movement of the turntable Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate t
103. ic restart has been completed Otherwise the software on the unit could be damaged You can now disconnect the USB device from the receiver 167 Troubleshooting In the event of a malfunction first check all the cable connections and operating states oU ee Ns Receiver and TV set power plugs are connected to wall socket Antenna cables are connected to the receiver input Receiver and TV set are correctly connected to each other by a HDMI or Scart or cinch cable Audio connections are made to the Hi Fi or Dolby Digital system as appropriate Receiver and TV set Hi Fi Dolby Digital system are switched on check power indicators Receiver is responding to remote control A selection of troubleshooting tips is offered below A No signal warning appears on some or all channels Remote control responding no longer Wrong time being displayed The following channels cut out or No or bad signal appears DSF Tele 5 HSE 24 and Sonnenklar TV Black or blue screen no on screen displays Network problem 168 Receiver or remote control command set may have been unintentionally changed Summertime setting wrong An incorrect time was imported from the reception signal DECT telephones operate on the same frequency as these channels Interference may occur due to inadequate level or poor shielding of cable Scart connection to TV deactivated by accidentally pressing the O button Check t
104. icnsinincanssadainesavevinsena encwnsvawtenmndin 99 Calling up the main menu and WENO CHOI pratesacepeevaacesvecsabacsegueesseansseeaens 99 Menu OVEFVICW 0cccecceeeeceeeteeeeeeeeeees 100 Main Menu Channel Search 101 Automatic Channel Search 0 101 Manual Search cccccseecceeeeeeeeeeeeeens 103 Search with Service ID ccceeeeeeeeees 105 Main Menu Service Menu 107 Automatic Software Update 107 Software update by satellite 109 Software update by USB eee 110 Update Firmware ccsiccettccnceatccbesdecoetiariew lt vovecebaed 111 Update Channel List ccceeeeceeeeeeeeees 111 Save channel list to USB cceeeeeee eee 111 Factory IGS CU acicssrpaienctnseladestsooninoniniencne 112 Main Menu SettingS cccccssseeeseeees 113 First Installation ccccccceeeeeeeeseeeeeees 113 Basic Settings ccccccccssseeeeseeeseeeseeees 113 Video Settings az cactsnesciensardcninicnscordstlessarenrecnedovees 114 Audio Settings ccccccssessccesseesseeeeeeseeeseeeeees 116 Time Seting sie coccnreassnnerecn ihecsvucmorions auleceenan wanes 117 Remote Control code ccceccceeeeeeeeeneeeeees 118 User Defined Settings 0c0ccee 120 Parental LOCK cccccceeceseeeceeeeeeeeeeeeseeeenens 120 Customize Screen Menu
105. im nu ih QOvervoltage protection KAZ 11 KAZ 12 171 Technical Appendix Single cable systems J y he gt aliy Eg s faye ua ee Ars d y 5 17 Po re E a F rm 5 me WFS 23 i ESU 23 ES 34 ESU 23 ESU 23 ERA 14 iil IHEHI Overvoltage protection KAZ 11 KAZ 12 172 Technical Appendix ae i F LIII Hiz WN iii h I t cee z Sat IF 50 Me Overvoltage protection KAZ 11 KAZ 12 173 Technical Appendix Connection examples for network functionality DHCP Receiver OFF IP address 197 1558011 Crossed network cable IP address 1927 168 0 10 PC laptop 174 Technical Appendix DHCP Receiver OFF TCP IP address 192 168 0 12 Network cable Switch HUB Network cable Network cable PC laptop PC laptop TCP IP address TCP IP address 192 1684010 192_168 0 11 175 Technical Appendix DHCP Receiver OFF TCP IP address TCP IP address 197 158 0 12 192 168013 Hoei B j ml AE e e e J ts W b r r a Hyg tet af EPEA at i A mee Hl Network cable DHCP server router Network cable e g Fritzbox Network cable Network cable PC laptop PC laptop TCP IP address TCP IP address 192 1660 16 197 _165 0 11 176 Technical Appendix DHCP Receiver ON TCP IP address automatic DHCP server router Network cable e g Fritzbox Wi
106. io Mode Live Operation section Channel selection from the channel list On the one hand the broadcaster logos are indicated in front of the channels supported on the other hand you have the facility of displaying a EWW channel list this is operational only once an EPG grabbing has been performed What restrictions are there with EPG Because of the large amount of data being transmitted the receiver cannot store all the data for the channels supported by EPG Therefore the receiver configuration is factory set to accept CV tW data for only a limited number of channels Refer to Editing channel lists Editing channels channel lists EWW on off for details of how to edit this pre configured list The more channels are added to this list the less BWV data is available for them due to system restrictions Where does the EPG data come from The EPG is broadcast over the ASTRA satellite at the frequency of 12 603 75 MHz with a symbol rate of 22 MSymb s and horizontal polarisation 18 V If you have accidentally deleted the transponder for this frequency you will need to start a new satellite and transponder search for the ASTRA satellite see Channel Search Is there any reason external to the receiver that might mean EPG does not work With non Kathrein reception systems it may happen that the EPG data cannot be transmitted because the necessary transponder 12 603 75 MHz symbol rate 22 MSymb s h
107. io and video streaming Guided first installation Pre loaded channel list Watch TV immediately without doing a channel search Function only with external hard disk connected CA modules and smart cards are not included with this product Automatic software and programme lists download Display of broadcaster logo in various on screen displays Unlimited number of timer recordings can be programmed one off daily weekly user defined and series timer 8 favorite channel lists for TV and 8 for radio YPbPr TV and VCR Scart output Composite colour RGB and Y C signal output programmable via the Scart socket TV Optical audio output for Dolby Digital data stream AC 3 Teletext decoder with 800 page memory capacity and teletext generation only via Scart Soundtrack selection for multilingual broadcasts Suitable for software updates via satellite USB stick and PC the operating software and the channel list can be updated separately On screen display OSD in 10 languages D GB F I E CZ NL PL TR RUS DiSEqC 1 0 1 1 1 2 1 3 and SCR single cable system control signals Operating system based on LINUX Power switch 4 000 channel memory positions Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs The unit is not fully disconnected from the mains see the sections Safety Instructions Important Instructions and Periods of extended
108. ist Chapter view Common Interface Community antenna network systems 4 x Sat IF Community antenna network systems 8 x Sat IF multifeed Subject Index 141 67 82 46 126 141 116 126 101 107 56 125 166 113 59 53 85 88 63 94 122 52 40 101 105 49 50 96 134 170 171 Community antenna network systems 16 x Sat IF multifeed Connection example Connection examples for network functionality Creating a new folder Creating chapters Creating folders Current view Customize screen menu D Default record duration Deleting Deleting chapters DHCP Off DHCP On DHCP Receiver OFF DHCP Receiver ON Difference between PAL and HDTV Direct channel selection DISEqC 1 0 DISEqc 1 1 DISEGC 1 2 DISEGG 1 3 Display volume bar E Editing a recording Editing channel list Editing channels channel lists Editing folders delete rename Editing recordings Editing satellites Editing transponders EPG setup EPG update 171 15 174 95 91 88 61 122 125 81 93 97 139 139 174 175 177 3 49 145 147 150 154 122 77 78 80 89 92 128 130 123 123 183 EPG updating time EXR EXU Extras menu F Factory reset Fault detection and troubleshooting Features First installation Front display brightness Front display in standby Front display notification Full text search G General information
109. ist is not overwritten The receiver saves the new data and then restarts Do not switch off the receiver during this process wait until the automatic restart has been completed Otherwise the software on the unit could be corrupted After the restart the update is complete 108 New software available Information UFS 912 date xx xx xxxx Dear customer New software V x xx is available XXX You will find more information at www kathrein de ec Cancel Update Software New Channel List available There is a channel list update available The sorting of your channel list will be retained u Cancel Update Channel List Note Data will be stored Don t switch off the receiver Receiver will start automatically Main Menu Service Menu Software update by satellite After calling up the menu you will first see the following on screen display All available modules components for your receiver will be loaded and then displayed The loading process can take up to 60 minutes The following on screen display then appears Use the v buttons to select the parameters to be updated during the update procedure Show Infotext Press the button to display the info text for the available downloads These indicate the main features of the new operating software based on which you can decide whether you want to install the new software on your receiver Update Softw
110. le system check your settings frequency and transmission channel and if necessary call for expert help If you previously selected two satellites under Number of Satellites you must now make these settings for the second satellite Switch to the Satellite 2 field and make the settings in the same way as for the first satellite 163 Tuner Configuration When you have completed all settings for the satellite press the button three times The following on screen display appears Press the button to save your settings or the u button to leave the Tuner Configuration menu without saving 164 Media Centre On this aspect please follow the separate instructions Mediacenter und Netzwerk Web Interface see screenshot below that you can download from the Internet at www kathrein de Service Software and Downloads Receiver UFS 912 Anleitung Deutsch UFS 922 912 si sw 2 Fal olen bordel oq a z VIDEOS Pee aH oils ee TS SU By 4417 Farm bem Ble ra HU PEA ENPI F eer HHJ Y Sas ee Hr ey EE L hi mia pokri bs taa mjr 7 o Pua aa som and Parie I gt a ee LEFELE LIS He a Wan Sel ee Erpina s FR aed lararhali Meakin IP BH apes pil Yau ube intarnennada ae 3 Djilan oe Vide 1 P Arlein Faris Bildarn and MFE iedee iki limeme emoe rerh ISE piera pge ade Titer Hemet k
111. lied by your Pay TV provider Note The module on screen displays may be shown in English even if you have selected German as the menu language because the menu is generated directly by the module Multidecryption lf your CA module is capable of decrypting multiple channels you can press the ED buttons to select whether the module should always decrypt only one channel Off or multiple channels simultaneously On This function is optimised for AlphaCrypt modules and may lead to malfunctions with other modules If you select Off when making an unencrypted recording of an encrypted channel you cannot at the same time view any other encrypted channel through the same CA module and the currently selected transponder If you select On when recording an encrypted channel you can at the same time view any other encrypted channel through the same CA module and the currently selected transponder The number of other encrypted channels that you can view depends on the CA module you are using 136 Main Menu Interfaces CI hard disk and network Information for Conax SECA Viaccess and CryptoWorks users Note that with monthly activation intervals the channel providers have different procedures for activating pay TV cards Activation may therefore be a few days before or after the beginning of a new month During this activation period the CA module and card must be in the slot and the receiver must be turned on and
112. mber pad transponder frequency not yet saved to select the transponder frequency to be tested At the bottom right of the on screen display the receiver shows the current signal strength and signal quality of the selected transponder The DVB Type FEC Polarisation and Symbol Rate options only need to be specified if the transponder has yet to be saved DVB Type Select here whether standard channels DVB S SD or HDTV channels DVB S2 HDTV should be received from the desired transponder FEC Select the applicable error rate Viterbi rate You need not state the error rate for the DVB S SD transponders Instead a fixed display of Automatic appears You must state the correct error rate for the DVB S2 HD transponders Either QPSK 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 or 8PSK 2 3 3 4 3 5 5 6 8 9 or 9 10 Polarisation Select the correct polarisation horizontal or vertical Symbol Rate Use the number pad to enter the related symbol rate 127 Main Menu Settings Tuner Configuration Since the tuner configuration is very detailed we have dedicated it a section all to itself For this see the section Tuner Configuration Edit Satellites After calling up the menu you will see the following on screen display The individual items are selected using the laji buttons If you require to access submenus they can be called up using the button The changes to th
113. n to activate the input field Now a you can enter the search expression E Urlaub category name for your new category Alphanumeric characters are entered as described in Operating instructions Alphanumeric entries To search the available programmes for one of your hints categories you need only select the desired hint category in the categories view called up using TVR the M blue button or in the My hints window and press the button to confirm Schwveden QWwEeERTZUIOPL 4 If programmes are available for your AlsloLeMilelslelilols t YX LCJ VLB LN LM T hints categories in future this will be 123 Leeraste indicated by an asterisk in a blue field when opening the EPG Each time the EPG is updated the programmes for the picks you created will be updated automatically 64 Premium tv tv EPG In this section you have the facility to select an actor that is shown in the actors list using the cursor Gy buttons and the by pressing the button to search through all available data for programmes in which this person appears If there are programmes available for which the name of this person appears in the information data a list of the relevant programmes will be displayed by the receiver So as to find a specific actor more quickly you can enter their name using the number pad and its alphanumeric assignments Alphanumeric characters are entered as described in Operating i
114. nds for Universal Plug and Play Further information is available from www upnp org VCR PVR connection Connection for an external recorder Such as a video or DVD recorder Viterbi rate The Viterbi rate code rate error rate characterises the error protection used by the channel provider The DVB standard provides the following values 1 2 2 3 3 4 5 6 7 8 Y C S video signal Web interface This is a web interface for interaction between two or more systems e g receiver to PC As a result it is possible e g to transfer data 8PSK 8 Phase Shift Keying Digital modulation process used for HDTV satellite transmission 181 Service If despite studying this operating manual you still have questions about getting started with the unit or using it correctly or if unexpected problems occur please contact your specialist dealer 182 4 GB limit A Actor Add to favorites list Alphanumeric entries Antenna amp satellites Applications Audio settings Automatic channel name update Automatic channel search Automatic software update Automatic timeshift B Backup operation Basic settings C Calling up EPG Calling up the options channel Calling up the recording archive Categories view Change category Channel banner duration channel information Channel information Channel search Channel search with service ID Channel selection Channel selection from the channel l
115. newly found channels are added at the end of the existing complete list Press the button to return to the TV picture The new channels can now be selected in the channel list 102 Main Menu Channel Search Manual Search After calling up the menu you will see the following on screen display The ality buttons allow you to select different sets of parameters for the search In this menu you can selectively search a transponder for the new channels Satellite Use the Je buttons to select the satellite on which the transponder you want to search is located By pressing the button at this point you can view a list of the installed satellites Use a the a buttons to select the satellite you want and confirm your selection with the button Make sure your reception system is aligned to this these selected satellite s If you want to search several transponders on a satellite you should start an automatic search of the transmitting satellite Transponder Frequency Use the aj buttons transponder frequency already saved or the number pad transponder frequency not yet saved to select the transponder frequency on which the channel being sought is transmitted By pressing the button at this point you can view a list of the saved transponders a for the selected satellite Use the al buttons to select the transponder you want and confirm your selection with the button At the bottom right of the on screen screen di
116. ng to print We reserve the right however to make changes at any time and without prior notice If new software is released for your receiver and this affects the information in the operating manual e g changes to the menus and or functions if we believe it necessary we will make available a new operating manual for download under www kathrein de Make a note of the receiver s basic settings these are set during the first installation so you can restore them if necessary Included in the software for this receiver is software that is licensed under the GNU General Public Licence The source code of the program is obtainable under http www kathrein de linux receiver ufs912 The term DiSEqC used in this operating manual is a registered trade mark of the European Telecommunication Satellite Organisation EUTELSAT X DOLBY Manufactured under licence from Dolby Laboratories Dolby and the double D DIGITAL symbol are registered trademarks of Dolby Laboratories H M HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE Receiver Features Scope of Supply Receiver features The UFS 912 HDTV receiver is suitable for the reception of digital satellite TV and radio channels This receiver can receive both HDTV High Definition Television and also conventional TV Standard Definition Television The receiver has a
117. ngineer for the respective reception system Only make these settings yourself if you are fully familiar with the particulars of your reception system 130 Main Menu Settings Satellite Name Select here the satellite for which you want to edit delete the transponder or for which you want to add a new transponder By pressing the button at this point you can view a list of the satellites saved in the receiver oK Select Satellite Frequency Select here the transponder to be edited deleted By pressing the button at this point you can view a list of the transponders saved in the receiver for this 4 satellite Use the ae buttons to select the transponder you want and confirm your selection with the button Symbol Rate The symbol rate is positively assigned to each saved transponder and cannot be changed Polarisation The polarisation is positively assigned to each saved transponder and cannot be changed 131 Main Menu Settings Edit Transponder By pressing the button you can call up the input screen which allows you to edit change the settings of the previously selected transponder Frequency Here you are shown the selected transponder to be edited The transponder frequency cannot be changed DVB Type Select here whether the selected transponder is to receive standard channels DVB S SD or HDTV channels DVB S2 HD Error rate You only need to enter the e
118. ngs Chapter view The chapter view for a recording is Recording Archive called up using the O red button in the recording archive The following on 00 08 15 h screen display appears see example 00 1222 h screenshot on the right 00 16 30 h Chapter Note ee 20 27 Sneath When the chapter view is called up the 00 28 53 h receiver automatically creates seven chapters for the recording you select if this has not already been done This function is not performed if you have already created chapters manually 96 Recording Archive Playing Back Editing Recordings Use the a v buttons to select the desired chapter The start of playback from the selected chapter is performed using the button During the playback you can press the i red button to display the chapter view again and if desired use the v buttons to select another chapter This is called up by pressing the button see example screenshot above Deleting chapters Deleting a chapter Use the Lalty buttons in the chapter overview to select the chapter to be deleted and press the o red dot button The following on screen display appears see screenshot on the right Use the 4 v buttons to select Delete Start Blockselection and confirm your selection with the button The selected chapter is deleted The section of the recording assigned to that chapter is assigned to the preceding chapter that has
119. ns to switch to the selection field End and use the ED buttons or the number pad button to select the desired recording end time When all settings have been made press the button to save the recording settings 12 Premium tv tv EPG Recording weekly Remember that the day of the week for the desired programme is loaded in the recording schedule and you can make no further manual corrections to it Therefore before press ing the button select the programme on the day of the week that you will want to make the weekly recording in future Use the J buttons to select the weekly recording mode see screenshot above Use the Lalty buttons to switch to the selection field Start and use the J buttons or the numeric pad buttons to select the desired recording start time Use the Lalty buttons to switch to the selection field End and use the J buttons or the number pad button to select the desired recording end time When all settings have been made press the button to save the recording settings Recording user defined Use the lt gt buttons to select the user defined recording mode see screenshot on the right Use the v buttons to switch to the Day field and use the lt gt buttons to select the required day for the recording Recording Archive Dokus Press the button to fix the selection the day will be shown in red If necessa
120. nstructions Alphanumeric entries The only data that will be shown is that for persons whose name includes the characters you entered see screenshot on the right You can also select your favourite actors a using the cursor E buttons providing their names are in the list and then press the o red dot button to confirm their inclusion in the My hints section If programmes are available for your picks categories in future this will be indicated by an asterisk in a blue field when opening the EPG Each time the EPG is updated the programmes for the picks you created will be updated automatically A J Cook Aaron Seltzer Abraham Belaga Achim Schelhas Achim Winter Adam Campbell Adam G Sevani Adam Herschman Adam MacDonald _Adam Savage Adam Shankman 65 Premium tv tv EPG Search function The search function can be called up in EPG at any time by pressing the button The following on screen display appears see screenshot on the right earch to ae You have the following search options sim Programmf hrer bei YouTube j _ Actor Sepp Schauer S ea rch fu rth er b road casts In th e Keywordsearch in detailed information example on the right Sturm der Liebe Full text search BACK TEXT Exit Actor Select the actor listed in the channel information selection using the lt gt buttons Keywordsearch in detailed information Full text
121. o the East step by step Me Oe Start slow rotation to the East Once you have reached the desired East West limit switch to the respective field Set current position for border and press the button to confirm If you subsequently want to delete the set limits switch to the Reset border positions field and press the button to confirm deletion of the limits You can then set new values for the limits Once you have set all the limits press the vce button Select Satellites Select the Select Satellites field Select here which satellites you wish to receive via your turntable Pressing the button presents an on screen display of the satellites stored in the receiver oK Select Satellites 4 Use the ae buttons to select the satellites to be received and confirm your selection in each case using 151 Tuner Configuration the button The selected satellites will be identified with a tick When you have completed all settings press the u button Configure Satellites Select the Configure Satellites field Press the button to allow settings selection of the satellite s The following on screen display appears Satellite and Position Select the Satellite and Position field From the previously selected satellites select here the satellite for which you want the turntable to search LNB Type If your reception system does not have a Universal LNB press the bu
122. of the unit The manufacturer accepts no liability for accidents caused by the user opening the casing of the unit Connections Incorrect wiring of the connections can lead to malfunctions or defects on the unit Periods of extended absence thunderstorms mains socket accessibility In order to disconnect the unit from the mains completely the mains plug must be unplugged from the wall socket Therefore install the unit close to a mains socket and make sure this socket is accessible at all times so that you can disconnect the unit from the mains if necessary If you are away for an extended period and during thunderstorms always switch the unit off at the mains and unplug it from the socket This also applies to the other equipment connected to the unit Isolation from the cable network is also recommended Note any timer programming receiver and turn the unit on again promptly before the recording time KY Ka Installation location All electronic equipment generates heat The temperature rise of this unit does however lie within the permissible range Sensitive furniture surfaces and veneers may become discoloured by the effects of constant heat over time The feet of the unit can also cause colour changes to treated furniture surfaces If necessary place the unit on a suitable stable and flat base Electronic equipment is not domestic waste it must be disposed of properly in accordance with dir
123. of the recordings or to reschedule it so there is no longer an overlap If the overlap arises when the recording is entered the receiver notifies you directly of the overlap as soon as you give the Save command for the recording Edit reminder Recording onte Date Wednesday 30 06 2010 15 00 Recording 4 TV Program Guide TT Editing the Channel List All changes to the channel lists and favorites lists which you can make as described in the following section are not saved by the receiver unless when you exit the menu by pressing the button you answer Yes save changes to the question Save changes using the button If you give the answer No don t save changes all the settings changes you made will be discarded and not saved Calling up the Edit TV Channellist menu You have two ways of accessing the edit menu for the channel lists 1 Directly via the channel list e From the TV picture press the button to open the channel list e Then press the o red dot button or 2 Using the Edit channel lists item in the main menu e From the TV picture press the button to open the main menu e Then select the Edit channel lists item using the Lally buttons and confirm the call up from the menu using the button The procedure for editing the channel lists and channels is the same in both menus The following on screen display appears The receiver noti
124. of the satellites stored in the receiver a Use the a buttons to select the satellites to be received and confirm your selection in each case using the button The selected satellites will be identified with a tick Configure Satellites Select the Configure Satellites field Press the button to allow settings selection of the satellite s The following on screen display appears Satellite and Position Select the Satellite and Position field From the previously selected satellites select here the satellite for which you want the turntable to search 155 Tuner Configuration LNB Type If your reception system does not have a Universal LNB press the button so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Test Transponder Select the Test Transponder field Select here a test transponder for the satellite being searched for at which you will be able to detect in the course of the search for the satellite wnen you have received a signal from the satellite being
125. of your TV format Either Main Menu Settings Force 576i must be supported by the TV set otherwise you will not see a TV picture You can only only need to make this setting if you have selected the setting Automatic for HDMI YUV Resolution If for a programme that is transmitted in the format 720 x 5 76 standard TV the original format is to be transmitted to the TV set select the On setting If the setting is Off the programme may be automatically scaled up to the HDTV format 720p by the receiver Default HDMI Here you can set the connection over which you want to connect the TV set and the receiver Choose either HDMI or DVI HDCP digital copy protection Select here whether HDCP digital copy protection is to be constantly activated On or deactivated Off To view some programmes it may be necessary for the setting to be set to On Show 4 3 event Here you can select the type of screen display mode for 4 3 broadcasts on a 16 9 TV set Either Normal Pillar Box Stretched Full Screen or Zoomed in Pan amp Scan Important instruction for picture output using YUV The YUV output option can only be used if RGB is not selected as the output signal for the TV Scart socket In this case select Y C or FBAS as the output signal for the TV Scart socket Pan amp Scan only for 4 3 Letterbox only for 4 3
126. on screen display appears see screenshot T o on the right Archive hard disk has been set up successfully After restarting the receiver you can use the recording functionality Press the key to restart the receiver Press the button to confirm and close the procedure On completion of a successful first installation TV picture can be seen we recommend having the receiver search for any available software update It is a prerequisite that you have selected included in the selection the satellite ASTRA 19 2 East in the first installation Press the button to switch to the main menu Use the a v buttons to select Service Menu and confirm by pressing the button Use the Lalty buttons to select Software Update by Satellite and confirm again by pressing the button The receiver will now automatically start to search for new software For information on the rest of the update process please refer to the section Main menu Service menu Software update by satellite in these instructions 45 General Operating Instructions In this section we would like to offer you some basic tips and explanations about using the UFS 912 These are not specific to any one menu rather they can be used as help and orientation in practically all menus Alphanumeric entries For entries such as names of favorites or search expressions use the keyboard displayed on the screen see example screen
127. on the system 3of4 For the third satellite on the tuner item C on the system 4of4 For the fourth satellite on the tuner item D on the system 24 Connection and Setup DiISEgC Repeat The setting for how often the DISEGC command must be repeated depends on the configuration of your reception system Refer to the documentation for your reception system or seek assistance from a specialist engineer Off DiISEqC command is not repeated 1 DiISEqC command is repeated once 2 DiISEqC command is repeated twice 3 DiSEqC command is repeated three times 22 kHz Control You only need to specify this data if your LNB type is Simple The 22 kHz signal is needed to switch LNBs when using multi feed reception and to switch between Low and High band On Off Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite press the O green button If you have selected more than one satellite max four the receiver will automatically skip to the settings for the second satellite Now make the settings for the second satellite followed by the third and fourth satellites as required in the same way as described for the first satellite Once you have completed the settings for the satellites assigned the r
128. onfirm that you are sure you want to update the operating software Press the button to confirm the displayed message The receiver now automatically performs the update of the operating software Once the update is complete the receiver is re initialised and starts operation again Never turn off the receiver during the update process as otherwise you could lose the entire software You would then need to re install it in a workshop or using a PC You can use the Service menu to check whether the new software has been installed Follow all on screen instructions Check the time setting following a software update Update Channel List The method for updating the channel list via USB is exactly the same as that used for updating the software channel list name channel xml Save channel list to USB The receiver here offers you the option of saving to a USB device the channel list you are currently using so that you can recover it later if required First connect your USB device to the receiver using a free USB port on the receiver Then select the Save Channel List to USB field and confirm the start of saving by pressing the button During the saving process you will see the Update via a USB menu displayed however you cannot navigate within this menu until the save process has been completed The function Update Channel List allows you to reload the saved channel list to the receiver at a later date should you
129. or HDTV with better quality EUTELSAT European Satellite operator based in Paris Many orbit positions and European customers Transponders in the frequency range 10 7 12 75 GHZ FAT and FAT32 File systems for storage media Short Technical Glossary FEC FEC is the abbreviation for Forward Error Correction A technique for reducing the error rate of data transmission Additional bits are inserted into the data stream so that error correction algorithms can be used on reception The FEC error rate corresponds to the Viterbi rate FTP File Transfer Protocol File transfer method FTP is a network protocol for the transmission of files over IP Internet Protocol networks GNU GNU is not Unix it is an open operating system for software developers HD Ready This is a label created by the EICTA European Information Communications and Consumer Electronics Industry Technology Association for equipment that is capable of reproducing HDTV HDCP High bandwidth Digital Content Protection Encryption system which protects the HDMI and DVI interfaces for secure transmission of video and audio data HDMI High Definition Multimedia Interface Digital interface for digital video and audio data transmission between TV and receiver preferred for HDTV HDTV High Definition Television High resolution television with a resolution up to five times higher or finer than PAL or NTSC However there is no
130. orizontal is not transmitted by that system What about EPG data for broadcasters that are not broadcast using ASTRA For broadcasters that broadcast using the HOTBIRD 13 East satellite you must perform an additional channel search using that satellite exception Broadcasters supported by EWW the EPG data for these broadcasters is also drawn via ASTRA 58 Premium tv tv EPG You will only see information on the current or subsequent programmes in the EPG if this data is supplied transmitted by EWW or by the channel provider If no EPG data is available the receiver shows the message no data available instead of showing information on the current program The EPG data are not available immediately after first installation The data are only updated loaded after the first EPG update at night or the first time you switch the receiver to standby mode The data are saved on the archive hard disk that is connected and has been set up see Main Menu Interfaces HDD Management Make dedicated HDD These data are loaded after the receiver is started The full scope of the EPG is accessible only when the archive hard disk is connected and has been set up Calling up the EPG The EPG is called up by pressing the button You will automatically see the view you selected in the menu Settings User Defined Settings EPG Setup irrespective of which view you selected last time before exiting the EPG The follo
131. ork Inserting the smart card and the CA module Inserting the CA module into the Cl The Common Interface Cl of the UFS 912 is suitable for the use of two CA Conditional Access modules These two CI slots are on the left on the front behind the flap The CA module receives Smartcard chip contacts pointing upwards and towards socket strip and is then inserted into one of the two CI slots The smart card should be inserted into the CA module without exerting excessive force This also applies to inserting the CA module into the CI slot Do not use a excessive force and follow the instructions supplied with the smart card and the CA module To remove the module press the relevant eject button O You can find out which Conditional Access modules are in the CI slots on the UFS 912 and which Smartcard is in which CA module from the Mainmenu under Interfaces and the Common Interface menu Confirmation is by pressing the button The screenshots below depend on the specific module and card and so are only intended as examples 135 Main Menu Interfaces CI hard disk and network Press the button to access the menu generated by the CA module From this menu your card and your PIN code allow you to access various channels from your Pay TV provider CryptoWorks has been selected as an example here The details can be different for each CA module Always follow the instructions supp
132. ould be performed If you set the Network Search to Off only the factory default transponders for the satellite s you previously selected will be searched for new as yet unsaved channels If you set the Network Search to On the transponder network enables additional transponders that have not yet been stored to be located They are then stored and searched for new channels in the same way as the existing transponders When you have completed all settings press the O green button The following on screen displays appear example TV channels Radio channels found found During the search you will see the following on screen display example New channels found are identified by the suffix NEW see screenshot example right Note You can cancel the search at any time by pressing the u button After completion of the search you will see the following on screen display example Press the button The newly found channels are added at the end of the existing complete list 41 Connection and Setup Time Setup The individual items are selected using the Lalty buttons Changes to the current settings can be made using the lt gt buttons Time Mode Here you can select whether the time information should be obtained by the receiver automatically from a specific channel that you select or whether the time information should be entered manually Either Automatically o
133. ound in stereo via the HDMI or Scart connection For system reasons the same video signals are present at both the TV Scart socket and also the video cinch output Connect the satellite receiver VCR AUX Scart socket to the video recorder DVR using a Scart cable To play back a DVD i e output the signal from the DVR through the receiver on the TV set the TV set must also be connected to the receiver with a Scart cable This is necessary as there is no upscaling of the video signal from the VCR Scart socket to the HDMI output If you are recording using an external video recorder remember not to operate the receiver during recording otherwise all the on screen displays will appear on your recording Audio connection If you want to play the sound on your hi fi system connect the audio cinch sockets to the input sockets on the hi fi system using an appropriate cable see Connection example Optical digital output The fibre optic cable output is intended for the connection of a Dolby Digital system see Connection example Inserting batteries into the remote control Remove the cover on the rear of the remote control Insert the two batteries supplied into the remote control Ensure correct polarity of the batteries the and markings as indicated inside the battery compartment Slide the cover back onto the housing until it locks in place 16 Connection and Setup First installation Before you star
134. ownload the updates from the Internet The address is http www kathrein de You will find the software at Service Software and Downloads Receiver UFS 912 These updates can be performed via the receiver s USB ports see Service Menu Software Update by USB or Operation from the front panel Software update by USB After calling up the menu you will see the following on screen display The individual functions are selected using the te Channel List 4 iy buttons and started using the Save Channel List to USB button A pre requirement for the updating via a USB device is an empty USB device such as a USB stick formatted as FAT32 containing only the operating software or channel list to be loaded It is essential that the operating software to be loaded is stored on the USB device under the following directory structure Main folder kathrein Subfolder L ufs912 You can also download the updates from the Internet The address is http www kathrein de You will find the software at Service Software and Downloads Receiver UFS 912 110 Main Menu Service Menu Update Firmware First connect your USB device with the new operating software to the receiver using a free USB port on the receiver Then select the Update Firmware field and confirm the start of the update by pressing the button The receiver will ask you to c
135. play The LED lights up Red Receiver is in standby mode Green Receiver is in operation archive hard disk connected and functional Orange A recording is running that was started from the standby mode on completion of the recording the receiver switches back to the standby mode 13 Connection and Setup Connecting the unit Sat IF connections Connect the Sat IF inputs on the receiver to the satellite reception system Use coaxial cable with an F standard connector If the F standard connectors are not yet fitted on the cables strip the insulation from the cables as shown in the following illustration and carefully screw the F standard connectors on to the ends of the cables until they are securely attached XX Q x MXX Yor WX N AAYA VAAN AAD KAM AN eS as 10 When fitting the connector make sure that no strands of the braid are touching the inner conductor otherwise a short circuit will occur The quality of the reception signal depends on a good connection at this point 14 Connection and Setup Connection example Conventional DiSEqC system Dolby Digital system Network PC laptop External hard disk HiFi system 15 Connection and Setup TV and video recorder connection Connect the satellite receiver HDMI or alternatively TV Scart socket and the TV set using an HDMI or Scart cable see Connection example If your TV is stereo you can receive the s
136. ppears example BACK OK Leave a Use the cursor AP buttons to select your desired soundtrack option and press the button to confirm your selection Subtitle selection If the channel OSD includes the following symbol for subtitles a you can call up the Subtitle function as follows Press the IW yellow button twice use the Lalty buttons to select Subtitle and press the button to confirm your selection The following on screen display then appears example Use the Lalty buttons to select the desired subtitles and confirm by pressing the button The receiver will automatically return to the TV picture 54 Basic Operation in TV or Radio Mode Live Operation Teletext This symbol in the channel OSD shows you whether teletext is available for the selected channel When you press the button the receiver processes the teletext service data for your TV set to display even when the signal is encrypted During the search the page which is being searched for is displayed in the top left hand corner with the time and date displayed at the top right When the search is finished the teletext broadcast by the relevant encrypted channel provider appears You have several options for opening the desired pages 100 100 ZDFtext Di 29 09 09 12 16 25 Mit g Zwei te T pa eee eo nie ake art Entry using the number pad Berliner SPD gegen Steinmeier g i RWE Gkogeld b KW Verl gana Scroll backwards and for
137. pre supposes that the receiver was supplied with the RC 6 70 remote control e g UFS 912 or with the RC 660 remote control e g UFS 910 118 Main Menu Settings You can now use the remote control for your receiver to set a new remote control code the remote control code 1 is set as standard Simultaneously press buttons 9 1 for remote control code 1 9 EmA BB i z Biss M for remote control code 3 Bis E for remote control code 4 2 aaa for remote control code 2 Then press the button If the receiver display does not close down the receiver and the remote control are not set to the same remote control code Check your settings again To set the remote control in future for whatever remote control code is required proceed as follows 1 for remote control code 1 Emp 3 W for remote control code 3 2 sag for remote control code 2 4 Gas for remote control code 4 If you have another Kathrein receiver in use that was supplied with the RC 660 remote control you can use the UFS 912 remote control to operate that other receiver also On the UFS 912 remote control the codes for remotely controlling the RC 660 begin with 5 5 remote control code 1 for the RC 660 6 remote control code 2 for the RC 660 T7 remote control code 3 for the RC 660 8 remote control code 4 for the RC 660 119 Main Menu Settings User Defined Settings After c
138. r Manual Set Local Time Here you can select the local time offset to UTC formerly GMT e g for Germany 1 hour You can set the offset in 30 minute steps The maximum offset is 11 hours and 30 minutes and Summer Time time setting Here you can select whether the receiver should automatically change over to and from summer and winter time The Manual setting only makes sense if you also selected Manual for the selection item Time Mode since otherwise the time information is obtained automatically by the receiver Either Automatically or Manual Time setup channel only works if the time setup is set to Automatical Here you can select the channel from which the receiver should obtain the time information Press the button to call up a channel list from which you can select the channel you want using the a cursor CLP buttons Confirm your selection with the button 42 Connection and Setup Setup Time now Press the button Depending on the desired time setup option Automatic Manual the following on screen display then appears Automatic Manual g p a 5 Input date Back Bate B You need not enter any further data the Use the number pad or the lt gt buttons to receiver will automatically update the date and time enter the correct date Then use the Lalty buttons to switch to the Time field and use the number pad or the lt gt buttons to
139. r selection with the button The selected channel s will be deleted Skip Edit TV Channellist Use the ajir buttons to select Skip z a 216 Ronauie a PASM TV and confirm your selection with the Py libertyTVFRO OOOO O O 215 C GUMON l 220 oT The following on screen display appears pea DirectS o see example screenshot on the right 723 The channel that is to be skipped in future a is shown in grey in the channel list If you F Telesur O O i it i i CCTV FC wish to select it in future you can do this sm only by direct selection from the channel list When manually zapping through the channels using ne buttons the channel This function can be cancelled using the edit menu will be skipped and no longer displayed select Unskip 81 Editing the Channel List Lock Use the ajy buttons to select Lock and confirm your selection with the button To lock the channel you must now enter your four digit PIN code factory setting 0000 The following on screen display appears see example screenshot on the right The locked channel is now displayed in the channel list with a padlock on the right hand side and can in future be viewed only by entering the four digit PIN code factory setting 0000 This function can be cancelled using the edit menu select Unlock To Favorite Use the v buttons to select To Favorite Now use the a gt but
140. receiver automatically returns to the Preview view TV Program Guide gt The S button allows you to scroll i iM Gutleben OOOO O backwards and forwards a day at a time Wn Gut leben o Servus Salzburg Using the o red dot button you Scientia potentia est Wissenswert can copy the selected programme to the recording settings see Recording Grossamland y O section Gutieben O P DN 62 Premium tv tv EPG Categories view The Preview view can be called up at any time TVR in EPG by pressing the J blue button In the Category view you can see all programmes sorted by category and starting time The following main categories are available for selection Highlights My hints see Extras menu Movie Entertainment Sport News Children Music Special interest Movie rating and HD broadcast Some main categories are further subdivided into sub groups such as movies action comedy crime TV Program Guide t e a vox e f i e A E Junior l ved Thu F t Sur Te na E ace RTL Television Gute Zeiten schlechte Zeiten 4516 e AE Kika _ a ies How Met Your Mother 19 i Back DN 8 E ProSieben n Bee l How Met Your Mother 19 Urama series SAE le Programmes can only be assigned to the above categories if the EPG data have been supplied by EVTV or the channel provider Select the required category using the aa buttons TVR You c
141. recording type later End The end of the recording is determined automatically by the receiver based on the available EPG data If you wish you can however change this manually Duration The duration of a recording is determined automatically by the receiver based on the start and finish times You can however correct the duration manually In this case the receiver automatically adjusts the end time to correspond to the new recording duration The start time of the recording remains unchanged Press the button to start the recording you can cancel it by pressing the or the o red dot button To abort the recording after it has started you must press the m button use the Lalty buttons to select the recording to be aborted and press the button to confirm the action Tested only with hard disks from the Kathrein product range see also www kathrein de Service FAQs 57 Premium tv tv EPG General information about the Premium EVE EPG What is the Premium VWV EPG The Premium GWEV EPG referred to below just as EPG represents the latest generation editorially prepared programme guide It provides all the EPG information for around 100 TV channels free of charge without you having to change channel and also offers schedule information up to two weeks ahead Which channels are supported by EPG You can see in the channel list which channels are supported by the EPG see Basic Operation in TV or Rad
142. reen button The receiver will now save these values for this satellite and skips automatically to the setting for the next satellite If you have selected more than one satellite the receiver will automatically skip to the settings for the second satellite Now perform the settings for the second satellite followed by the other satellite selections in the same way as described for the first satellite Once you have completed the settings for the satellites assigned the receiver will automatically display the screen for the channel search Continue the first installation with the Channel Search section 32 Connection and Setup Motorized Antenna DiSEqC 1 3 Motor Control Select the control type DiSEqC 1 3 For this refer to the documentation for your motorized antenna My Latitud UL y t i 00 0 0 N Go to Null Position My Longitude Select the field My Longitude and use the number pad here to enter your actual longitude My Latitude Select the My Latitude field and use the number pad to enter your current latitude Go to Null Position Select the Go to Null Position field Press the button to instruct the turntable to move to its null position Set Borders Select the Set Borders field In this menu you can set the limits for your turntable This is particularly necessary if the turntable has only a restricted range in which it can turn before striking an obst
143. reless transmission PC laptop 177 Short Technical Glossary AC 3 Output for Dolby Digital signal ASTRA SES Soci t Europ ene des Satellites satellite system Analogue and digital transponders in the frequency range 10 7 12 75 GHz AV programme pos Preferred programme slot on TV set for external connections such as Scart and HDMI CAM Conditional Access Module Decryption decoder which uses a smart card to decrypt the encrypted radio and TV signals Channel package The channel package for a digital transponder normally includes several TV and radio channels Each channel package has a fixed assignment for the transponder transmission frequency for polarisation horizontal or vertical for the symbol rate and for the Viterbi rate or error rate CI Common Interface Internationally standardised interface for CA modules Composite colour video signal Colour baseband signal for the transmission of colour video signals Data rate Data bits transmitted per second Is expressed in kbit s or Mbit s The higher the data rate the better the quality of the transmitted signal Data reduction Compression of video and audio signals Redundant information is discarded DHCP Dynamic Host Configuration Protocol This features permits automatic integration into a network Automatic assignment of the IP address subnet mask standard gateway and DNS server As a result these parameters do not need to be
144. ribed under Creating folders Editing folders delete rename Use the a v buttons to select the folder to be edited and then press the o red dot button The following on screen display appears see example screenshot on the right Use the lafy buttons to select the line containing the editing option you want to use Create new folder Delete The folder must be empty to use this function If the folder to be deleted still contains recordings you must first delete these as described under Editing recordings Delete Press the button to confirm deletion of the selected folder Rename Confirm selection of Rename with the button You can then give the folder a new name as described under Operating instructions Alphanumeric entries Create new folder See Creating folders section 89 Recording Archive Playing Back Editing Recordings Playback of a recording Use the Lalty buttons to select the desired recording Confirm selection of the desired recording by pressing the button Pressing the button again exits the recording archive and allows the desired recording to be viewed in full screen mode Playback starts at the last playback position If playback is started by pressing the button playback of the recording starts from the beginning and in full screen mode Playback functions During playback of a recording you have the following options Paus
145. rm the name you have entered for the new category using the button You can now assign the new category you have created in the same way as all existing categories as described under Change category 94 Recording Archive Playing Back Editing Recordings Create new folder See Folders in the recording archive Move to folder You can use this function to move the recording selected before calling up the edit menu to a folder you have created Use the La lv buttons to select Move to folder Then press the button The currently available folders are displayed Use the Lalty buttons to select the desired folder and confirm by pressing the button The following on screen display then appears example Use the laj buttons to select To XXXX Move and confirm by pressing the button The receiver moves the recording to the selected folder The receiver then automatically opens this folder and you will see a display of the previously selected recording in the folder Press the me button to return to the main overview of the recording archive If you are not sure which folder you are currently in this is indicated at the top of the display See example screenshot on the right Creating folders Change category Movie Create new folder Copy to USB Device Start Blockselection Recording Archive Sport 95 Recording Archive Playing Back Editing Recordi
146. rror rate if this is a transponder for reception of HDTV channels DVB S2 HD You can choose between the following error rates QPSK 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 or 8PSK 2 3 3 4 3 5 5 6 8 9 or 9 10 Polarisation Select here the applicable polarisation for the selected transponder Either Horizontal or Vertical Symbol Rate Use the number pad to enter the related symbol rate When all settings have been made press the button to save the changes 132 Main Menu Settings New Transponder By pressing the button you can call up the input screen to save a new transponder The following on screen display appears Frequency Use the number pad to enter the transmission frequency for the new transponder DVB Type Select here whether the selected transponder is to receive standard channels DVB S SD or HDTV channels DVB S2 HD Error rate FEC Select the applicable error rate Viterbi rate You need not state the error rate for the DVB S SD transponders Instead a fixed display of Automatic appears You must state the correct error rate for the DVB S2 HD transponders Either QPSK 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 or 8PSK 2 3 3 4 3 5 5 6 8 9 or 9 10 Polarisation Select here the applicable polarisation for the selected transponder Either Horizontal or Vertical Symbol Rate Use the number pad to enter the related symbol rate When all settings have
147. ruction such as a wall or tree Press the button The following on screen display appears The following buttons allow you to control the movement of the turntable Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate to the East step by step Me Oe Start slow rotation to the East 33 Connection and Setup Once you have reached the desired East West limit switch to the respective field Set current position for border and press the button to confirm If you subsequently want to delete the set limits switch to the Reset border positions field and press the button to confirm deletion of the limits You can then set new values for the limits Once you have set all the limits press the u button Press the O green button to move to the next menu The following on screen display appears LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal or Simple or User defined LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined On this aspect also refer to the documentation supplied with your LNB Selection Simple LNB Use the number pad to enter t
148. ry the receiver will suggest some days to you you can accept these suggestions or deactivate them using the cursor buttons and pressing the button 73 Premium tv twv EPG Use the 4 v buttons to switch to the selection field Start and use the a gt buttons or the number pad buttons to select the desired recording start time Use the Lally buttons to switch to the selection field End and use the ED buttons or the number pad button to select the desired recording end time When all settings have been made press the button to save the recording settings Series recording Use the lt gt buttons to select the Series recording recording mode see screenshot on the right g In series recording the start and finish of ee Ol ca a i lla recording are taken automatically by the Furtheroptios receiver from the EPG data i T Further options optional In Further options the receiver also allows you to further limit the data for a series recording Select the Further options line and confirm using the button The following on screen display appears Avoid repeat episodes z a o An episode is only recorded once any repeat of the same derholung episode is not recorded Nur diese Staffel aufnehmen Yes Record only this scale Only episodes on the season displayed below are recorded New episodes from a different season or old episodes from previous seasons are not r
149. s SERIE Receiver registers the Mono left programme as a series Audio selection is l TTP Receiver registers the mono Month programme as a film Audio selection is Mono right 52 Basic Operation in TV or Radio Mode Live Operation Calling up channel options OPT If the channel OSD contains the following icon fate this is a portal channel Press the J yellow button use the a v buttons to select Select Video stream and press the button to confirm your selection The following on screen display then appears example Use the alty buttons to select your desired channel option and press the button to confirm your selection The following on screen display appears Fe NON Vi 1s directly you can use 4 Press the button if you want to be reminded of this function next time or the eS button if you don t want to see this message again After selecting a channel option using the Lalty buttons skip through the other channel options in your selected portal channel 53 Basic Operation in TV or Radio Mode Live Operation Select Audio track If the channel banner displays 1 3 in front of the symbol for the selected soundtrack this tells you that OPT you have currently selected the first of the three available soundtracks Press the Uj yellow button use the Lally buttons to select Select Audio track and press the button to confirm your selection The following on screen display then a
150. search called up by pressing the button again The selection is made using the Lalty buttons To open the menu for More Episodes and Keywordsearch in detailed information press the button For the YouTube function please follow the instructions for the Mediacenter und Netzwerk Web Interface that you can download at www kathrein de Service Software and Downloads Receiver UFS 912 More Episodes The following on screen display appears TV Program Guide see example on the right The selection is made using the Lally IM iur der Liebe buttons SWR Fernsehen R RP Sturm der Liebe 66 Premium tv tv EPG Actor Use the lt gt buttons to select an available actor Press the button to see a list of those programmes if any in which this actor appears This depends on the name of this actor being included in the channel information The following on screen display appears example The selection is made using the Lalty buttons Keyword search in detailed information The following on screen display appears see example on the right a Now use the cursor ea buttons to select the first letter of the word by which you wish to search the available EPG information At the start of the selection process press the button You can now use the a gt buttons to select the desired word see example on the right Pressing the button a
151. shot The letters assigned to the number pad also apply to your remote control They are used very similarly to a mobile phone The following buttons can be used for entry or to select an action HATHREMN 46 General Operating Instructions Switch to qwertz keyboard control using the arrow buttons oo and the OK button see screenshot on the right Last character is deleted Switch between upper case and lower case letters l and numbers special Confirm the term entered characters B Cancel entry without saving Cancel entry without saving Switch between letters After you have entered the desired expression press the button in order to load the name search expression or the button to abort the entry Editing and selection options in the menus In some menus on screen displays this box is shown with a particular colour gradation Each colour gradation stands for a specific view selection The colours TV Channel assigned to the buttons are shown in td the table below Where the functions of Jo DrDish Television these buttons are assigned for the current ARAD ag menu view they are also shown in the oR SAna O line at the bottom of the on screen display 77 CO orrs Colour Button on the A Always pay attention to the remote control AN bar at the bottom of the on d screen display This provides UU Green information on what to do next
152. sion frequencies See example on the right EXR 551 assignment of a transmission channel to a transmission frequency When you have completed all settings press the u button 158 Tuner Configuration Number of Satellites Select the Number of Satellites field and set the number of satellites to be received by your reception system A maximum of two satellites can be received Satellite 1 Select the Satellite 1 field and press the button to make the settings for the first satellite to be received The following on screen display appears example LNB Type If your reception system does not have a Universal LNB press the button so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple or User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Select the frequency range to be changed and set the values that are correct for your LNB using the KJ buttons or the number pad When you have completed all settings press the button Test Transponder Select the Test Transponder field Here you can select a transponder
153. sistance from a specialist engineer Off DiISEqC command is not repeated 1 DiSEqC command is repeated once 2 DiISEqC command is repeated twice or 3 DiSEqC command is repeated three times Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar When you have completed all settings for this satellite satellite position press the vce button In the same way as for the first satellite now make the settings for the other satellite positions you require max 64 When you have completed all settings for the satellite positions you require press the cx button twice The following on screen display appears Press the button to save your settings or the cx button to leave the Tuner Configuration menu without saving Uninstall Satellite If you want to remove a satellite from your DiSEqC 1 1 configuration under Number of Satellites use the Opn buttons to select the satellite to be removed and then use the 4 buttons to switch to the Uninstall Satellite field Press the button to confirm deletion of the satellite You are now free to select and configure a different satellite for this position 149 Tuner Configuration Motorized Antenna The individual items are selected using the Lally buttons If you need to access sub menus t
154. so require The channel list channel xml is saved on the USB storage medium in the root folder To be able to load this list onto the UFS 912 again you must copy this channel list to the following folder structure with the aid of a PC laptop Main folder kathrein Subfolder L ufs912 111 Main Menu Service Menu Factory Reset After calling up the menu you will see the following on screen display You can here restore the channel list and the installation settings to the factory settings You can use the Lally buttons to select the components to be restored to their factory settings In each case use the 0BD buttons to select Yes or No In addition you can select whether after the restoration the first installation should automatically be started as for the initial set up Once you have performed all the settings use the Lalty buttons to switch to the Start Reset selection field and confirm the start using the button The components you selected will now be reset to the status at the delivery of the unit 112 Main Menu Settings After calling up the menu you will see the following on screen display You can choose between various different menus First Installation Basic Settings User Defined Settings Use the Lal v buttons to select the desired menu and confirm your selection using the button First Installation For this see the section Connection an
155. splay the receiver shows the current signal strength and signal quality of the selected transponder The DVB Type FEC Polarisation and Symbol Rate options only need to be specified if the transponder has yet to be saved DVB Type Press the j gt buttons to select whether you want to search for standard channels DVB S SD or for HDTV channels DVB S2 HDTV 103 Main Menu Channel Search Error rate Press the KJ buttons to select the applicable error rate Viterbi rate When searching for DVB S SD transponders you need not state the error rate Instead a fixed display of Automatic appears When searching for DVB S2 HD transponders you must state the correct error rate Either QPSK 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 or 8PSK 2 3 3 4 3 5 5 6 8 9 or 9 10 Polarisation Press the j gt buttons to select the correct polarisation horizontal or vertical Symbol Rate Use the number pad to enter the related symbol rate Channel Search Mode Use the aj buttons to select the type of channels that are to be searched for You have three options free amp scrambled All channels are searched for free channels only Only free to air channels are searched for scrambled only Only encrypted channels are searched for To view encrypted channels you need an appropriate CA Conditional Access module and a valid smart card together with a valid subscription to the relevant
156. ss the button to confirm your selection LNB Type If your reception system does not have a Universal LNB press the button so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple or User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Select the frequency range to be changed and set the values that are correct for your LNB using the J buttons or the number pad When you have completed all settings press the button Uncommitted Switch Set the Uncommitted Switches here to match the configuration of your reception system You can select Off or a value between 1 and 16 in single unit increments SatPos Select the field SatPos Set the SatPos here to match the configuration of your reception system You can choose between Off or a value between 1 and 4 in single unit increments 148 Tuner Configuration DiSEqC Repeat The setting for how often the DISEqC command must be repeated depends on the configuration of your reception system Refer to the documentation for your reception system or seek as
157. t to use the UFS 912 read the sections Safety Instructions Important Instructions and Connection and Getting Started through to the item First installation Do not connect the unit to the mains until all installation work has been properly carried out The guidance given in the First installation section assumes that the receiver has been properly connected as per the Safety Instructions Important Instructions and Connection and Setup through to the First installation section Required buttons on remote control for first installation NunEnc Een Proceed to next step in Ore Oe green the first installation g Go back one step in Confirm the changed red the first installation values setting Select change individual menu parameters navigation First switch your TV set on and select the AV HDMI input you have used to connect the receiver to your TV set Switch on the receiver at the power switch on the rear of the unit Undertake the first installation If you have any questions or encounter problems contact your specialist dealer Always pay attention to the bar at the bottom of the on screen display This provides information on what to do next Use the lafy buttons to select the desired menu language for your UFS 912 and confirm your selection using the button The selected language is indicated with a tick The following languages are available German
158. ted to the receiver As a security feature you are asked to confirm again by pressing the button that you really want to delete these files Make dedicated HDD To set up an archive hard disk press the button see Connection and Set Up First Installation Setting up archive hard disk Ethernet Settings After calling up the menu you will see the following on screen display These settings should not be made unless the receiver is linked into a network or is linked to a PC laptop using a crossed over network cable The Ethernet interface used in the receiver is a 10 100 base T Ethernet interface To make recordings using the UFS 912 and utilise the timeshifting and recording archive functions you must connect an external hard disk to the rear of the receiver USB and set it up yh einsfestival ae r If you want to connect your receiver to a DHCP server use the KJ buttons to select the On setting If you want to connect your receiver directly to a PC or laptop the DHCP setting must be Off 138 Main Menu Interfaces CI hard disk and network DHCP On DHCP Off DHCP server router Hub switch direct connection to PC or laptop The individual items are selected using the Lalty buttons The changes to the current settings can be performed using the Je buttons or the numeric pad Use the Lalty buttons to select the Get Make the s
159. th a padlock ketal on the left hand side and in future can only be viewed by entering the four digit PIN code factory setting 0000 Colors in Series This function can be cancelled using the edit menu select Unlock Rename Use the la i buttons to select Rename and confirm your selection with the button You can now rename your selected recording The following on screen display appears see example screenshot on the right Alphanumeric characters are entered as described in Operating instructions Alphanumeric entries Confirm the name you have entered for the favorites list using the button 93 Recording Archive Playing Back Editing Recordings Change category Use the Lally buttons to select Change category Now use the lt gt buttons to select the desired category see example screenshot on the right to which the recording s should be assigned Confirm your selection with the Copy to USB Device Start Blackselection button n If no appropriate category is available you can create the desired category yourself Use the aj buttons to select Edit category and confirm by nressingl button The following on screen display appears Press the button to create a new category The following on screen display appears Alphanumeric characters are entered as described in Operating instructions Alphanumeric entries Confi
160. the software update 167 Troubleshooting ccccceeseeeeseeeeeeeeeneees 168 Technical APpendix ccccssseeeeeeeeeeees 169 Technical Specifications 0ccceeee 169 Sat IF connection examples 04 170 Individual reception systems cceeeee 170 Community antenna network systems ACF E N E 170 Community antenna network systems 8 x Sat IF multi feed ee ceeeeeeeeeeeees 171 Community antenna network systems 16 x Sat IF multi feed cc eeeeeeeeeeees 171 Single cable SyStEMS ccccssseeseeeeeseeees 172 Connection examples for network TUMCUO ANY cnecccucraceteaneneectestehoosaiantcesuntes 174 Short Technical Glossary 0 000 178 SOIC auessa raria a 182 Subject IndeX cccscceeesssseeeeeeseeenseeeneees 183 F r VOU NOTES sicccciseticesiecesavcteneetivereteenccs 186 Safety Instructions Important Notes These two pages contain important information about operation installation location and connection of the unit Read these instructions carefully before setting up the device Danger Warning Mains cable Make sure that the mains cable power supply cable is not damaged Units with a damaged mains cable must be disconnected from the mains unplugged at the mains power socket and repaired by an electrical specialist before being used Only use the power pack supplied if available
161. then at the expiry of the inactive time period that was entered automatically switch into Standby mode If you do not start entering the inactive time period within five seconds of the window appearing the receiver will automatically revert to Standby mode Channel Banner Duration Select here how long the channel information should be displayed after a change of channel The options available are 1 2 3 4 5 or 6 seconds Playback Banner Duration Select here how long the playback information should be displayed after a the start of playback The options available are 1 2 3 4 5 or 6 seconds Display Volume Bar Select here whether on changing the volume using the receiver remote control the volume bar should be displayed on the TV screen selection On or should not be displayed selection Off 122 Main Menu Settings Front Display Brightness Set the front display brightness here Select the most comfortable setting for your ambient lighting Your available options are Bright Medium Darkor Off display is not switched on lit during operation Front Display in Standby Select here whether the front display is illuminated in standby mode To achieve the rated standby power consumption of less than one Watt this setting must be Off Front Display Notification Select here whether during operation the front display should display the name of the channel actually being watc
162. tion planes horizontal and vertical As a result the capacity of the transponder is increased QPSK Quadrature Phase Shift Keying Digital modulation process that is used for satellite transmission 8PSK is also used in connection with HDTV Receivers Receiver 180 RGB Video signal made up of three individual colour signals red green blue SAT IF signal Receiver input signal satellite intermediate frequency Scart cable 21 pin connecting cable e g receiver TV SCR single cable system Satellite Channel Router The single cable system is used to distribute digital Sat IF signals including HDTV and terrestrial signals over one cable to up to eight receivers There is no limit on the variety of channels i e the complete range of channels from one or two satellites is transmitted Switching and the transponder selection are undertaken in the feed system or in the matrix and are controlled by the receiver using a special DiSEqC command to EN 50494 Each receiver is allocated a fixed subscriber frequency over which it receives its channels A twin receiver requires two such subscriber frequencies The transponder selection and conversion to the subscriber frequencies is undertaken using special tuner modules so called SCR Satellite Channel Router that are installed in the feed system or in the matrix The Kathrein single cable system satisfies the single cable standard in accordance with EN 50494 i e
163. tion for the desired programme The reminder function is set up in exactly the same way as programming a recording The only difference is that the entry in the Recording line must be Reminder Use the v buttons to switch to the Date field and use the lt gt buttons to select the desired day Use the ajv buttons to switch to the selection field Start and use the a gt buttons or the number pad to select the desired time to switch over When all settings have been made press the button to save the reminder TV Program Guide settings The programme is marked in the programme guide and in the Timer list view see screenshot on the right with a green dot and the receiver will automatically switch over to the pre selected channel at the start of the programme The reminder function is only run if the receiver is in operation The receiver is not started automatically by a reminder function 19 Premium tv tv EPG Timer list view The Timer list view can be called up at any time in EPG by pressing the O red button The following on screen display appears example The Timer list view shows you all the recordings and reminders that are scheduled marked green TV Program Guide Using the aa buttons you can sort the recordings by Once only or Continual recordings you can display this selection option also by pressing the Oo red button again
164. to and from summer and winter time The Manual setting only makes sense if you also selected Manual for the selection item Time Mode since otherwise the time information is obtained automatically by the receiver Either Automatical or Manual Time Setup Channel only works if the time setup is set to Automatical Here you can select the channel from which the receiver should obtain the time information Press the button to call up a channel list from which you can select the channel you want using a the cursor Er buttons Confirm your selection with the button 117 Main Menu Settings Setup Time Now Press the button Depending on the desired time setup option Automatic Manual the following on screen display then appears Automatical Manual BACK Cancel You need not make any further entry the Use the number pad or the lt gt buttons to receiver will automatically update the date and time enter the correct date Then use the Lally buttons to switch to the Time field and use the number pad or the lt gt buttons to enter the correct time Then use the button to confirm your entry Remote control code After calling up the menu you will see the following on screen display You can use this function to allow you to operate several receivers e g four UFS 912 units using the same remote control You can assign each receiver its own remote control code This
165. to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined On this aspect also refer to the documentation supplied with your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user defined Press the button to enter the required low high and limit frequencies The entry is made using the number pad Stop on Signal Select the Stop on Signal field Here you can select whether the motorized antenna should stop its rotary movement immediately on reception of a signal from the desired satellite You can choose between On and Off 31 Connection and Setup Move Antenna Select the Move Motorized Antenna field Here you can control the movements of the motorised antenna using the following buttons Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate to the East step by step Me Oe Start slow rotation to the East Set the turntable so that both of the bars Signal Strength and Signal Quality on the right of the screen show the highest available percentage values Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar Once you have achieved the best reception signal press the O g
166. tons to select the desired favorites list see example screenshot on the right to which you want to copy the channel s Confirm your selection with the button The selected channel s are copied into the favorites list you selected 82 Edit TV Channellist ll o gt ALJ Renault V o AKA BMY o o ALi LibertyTV FR O EKTO o o ZA Demain oo a 222 ZEL CASH TV ew eset 225 226 227 CCIVE Editing the Channel List Start Blockselection Edit TV Channellist Use the 4 buttons to select Start Blockselection and confirm your selection O oaao U MOR Sachsen a I AJA NDRFSSH OOOO with the button You can now use the daa Na g 270 a Y buttons to start block selection TPA WDR Dortmun in the previously selected channel This 274 selects the channels in the sequence en a a o in which they appear in the previously 7 selected channel list and applies a coloured background to them see example screenshot on the right Then press the o red dot button You can now carry out all the editing functions channel by channel individually for all fe selected channels Select the desired action Move Delete Skip Lock or To Favorite using the Lally buttons and confirm your selection with the o button You can find an explanation of the individual edit options under Editing channels channel lists in this section Editing channels favorites
167. tons to select the type of tuner configuration and confirm your selection using the button Continue as described in the tuber configuration for the type of reception you selected 143 Tuner Configuration Simple LNB The individual items are selected using the Lally buttons If you need to access sub menus they can be called up using the button The changes to the current settings can be performed using the lt gt buttons or the number pad The following on screen display appears Satellite and Position NB Frec 4 Hiz 6 Signal Strengtt Test Transponder gt 1 10743Mhz 22000MS s Signal Quality Press the button to display the on screen display with all the pre a programmed satellites Use the ae buttons here to select the satellite from which the signal is present at the tuner and press the button to confirm your selection LNB Type If your reception system does not have a Universal LNB use the lt gt buttons to select the LNB types that are used in your reception system You can choose from the following LNB types Universal Simple or User defined LNB Frequency MHz You only need to specify this data if your LNB type is not Universal LNB The data required differ for the settings Simple and user defined Refer to the documentation supplied for your LNB Selection Simple LNB Use the number pad to enter the LNB frequency Selection user define
168. top is displayed in front of the name of the recording 85 Recording Archive Playing Back Editing Recordings Selection options remote control buttons in the recording archive 86 i red button 1x call up the chapter view or the automatic structure of chapters if not yet available 2x overview of existing recordings O green button 1x call up ordering the recordings ordered by date ordered by title and ordered by duration 2x overview of sorting options OPT Ej yellow button 1x display of the recordings by channel 2x overview of channels for which recordings are available TVR Ej blue button 1x indication of the recordings by category e g move news sport series 2x overview of the categories for which recordings are available p lt e buttons Changes to the sorting in each selected category button The first press starts playback of the last item in the Preview window If the button is pressed again the playback is continued in full screen mode button Starts playback of the selected recording from beginning in full screen mode o red dot button Call up the edit menu button Search for a particular recording or programme content e g key word search from the detail information or other recordings of this programme enter the search expression using the number pad on the remote control see also the section Operating Instructions Alphanumeric entries B
169. transferred via the network to the PC as one file gt 4 GB A prerequisite for this features is that the PC hard disk is formatted in NTFS Start UPnP at Booting Here you can select whether the receiver s internal UPnP server is to be activated when starting the receiver Press the or button to exit the settings 141 Main Menu Language Settings After calling up the menu you will see the following on screen display 7y Ni n a ai Er i Use the alty buttons to select the desired menu language and confirm your selection using the button The following languages are available for selection German English French Italian Spanish Czech Dutch Polish Turkish and Russian The selected menu language is indicated with a check Press the u button to return to the main menu 142 Tuner Configuration The main menu is called up by pressing the button The following on screen display appears The settings for the tuner configuration should be made by a specialist engineer for this reception system You should only perform the tuner configuration yourself if you are fully familiar with the particulars of your reception system You can set up the tuner configuration for the following types of reception systems Simple LNB DISEqc 1 0 DISEqC 1 1 One Cable System UAS 481 One Cable System EXR EXU User or Motorized Antenna DiSEqC 1 2 DISEqe 1 3 Use the Lally but
170. tton so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Test Transponder Select the Test Transponder field Select here a test transponder for the satellite being searched for at which you will be able to detect in the course of the search for the satellite when you have received a signal from the satellite being searched for Stop on Signal Select the Stop on Signal field Here you can select whether the motorised antenna should stop its rotary movement immediately on reception of a signal from the desired satellite You can choose between On and Off 152 Tuner Configuration Move Motorized Antenna Select the Move Motorized Antenna field Here you can control the movements of the motorised antenna using the following buttons Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate to the East step by step Me Start slow rotation to the East Set the turntable so that both of the bars Signal Strength and
171. umber pad see documentation on your single cable system When you have completed all settings press the ec button 162 Tuner Configuration Number of Satellites Here select up to the number of satellites that are in the signal max two Satellite 1 Select the Satellite 1 field and press the button to make the settings for the first satellite to be received The following on screen display appears example LNB Type If your reception system does not have a Universal LNB press the button so that you can make the settings for the LNB You can choose from the following LNB types Universal Simple or User defined If you select Universal you need make no further settings If you select Simple you need to enter the low frequency manually For this refer to the documentation for your LNB If you select user defined you need to manually set all the frequency ranges that are configured for your LNB For this refer to the documentation for your LNB Select the frequency range to be changed and set the values that are correct for your LNB using the J buttons or the number pad When you have completed all settings press the button Test Transponder Select the Test Transponder field Here you can select a transponder for checking whether your settings are correct using the signal strength bar and signal quality bar If no connection can be established to the single cab
172. ver off at the power switch directly from the operating mode This can lead to a loss of data and corruption of the software Information on Audio MPEG Inc and S I SV EL S P A This unit makes use of legally protected technologies which are protected by patents in the USA and also by other intellectual property rights in other countries KATHREIN Werke KG has obtained licences from Audio MPEG Inc and Societa Italiana per lo sviluppo dell elettronica S I SV EL S P A to use these technologies These licences carry certain restrictions which apply also to you as the customer Accordingly this unit may only be used by the end customer for private non commercial purposes and for the licensed content It may not be used for commercial purposes The use of products or processes that are sold or used with this unit is not included in this statement The use of reverse engineering is not permitted in respect of the licensed technologies nor is disassembly Power consumption in standby mode lt 1 W The standby power consumption of lt 1 W printed on the receiver packaging is only achieved when the receiver is in standby mode with the display switched off You can make this setting in the following 7 19 7 19 19 Settings User Defined Settings Customize screen menu Front Display in 7 19 menu Main menu Standby Miscellaneous The information in this operating manual was correct at the time of goi
173. wards USING Viethen 100 cog fi lucked coe st pp the Lally buttons Scroll up and down in the sub pages e g 1 2 and 2 2 using the lt gt 13 00 ARD Mittmgsmmamzin ss sss Inhalt A Z 101 E ryvice 7 buttons Nachrichten 112 Recht y Justiz 5 Programm si a 300 Koch Tipp Service 200 eer eee ee 5 Wahl SH index 1 D Neteisteta iskat OPT FAV Select using the options indicated by the coloured buttons red O green WJ yellow and TVR Ej blue listed across the bottom of the screen Press or to exit teletext 99 Basic Operation in TV or Radio Mode Live Operation Automatic timeshift The UFS 912 provides a special function here As soon as you switch to a channel the receiver automatically starts recording the programme you are viewing to the hard disk in the background When you change channel again this stored data is deleted and background recording begins again This continuous background recording by the receiver offers you the following options Rewind back to the time when you switched to this channel and also fast forward up to the live signal Gita buttons Pause function eS button the picture is frozen Going forward and back in 30 second steps EJ buttons If after viewing a programme for a time you decide you want to record it you can do so as from the point you switched to that channel function only available from software version 2 0 see also OTR
174. wing on screen display appears example Current date and time Selected EPG view TV Program Guide Current picture mary CHAIVIN for the selected channel Channel E number from iS Ie th let Anie Wake Up Yoga Jetzt 14 day a e rotate avaiable E calendar tor list channel per 20 asa DE the programme name current sa o data available oreview programme Ss I lt VA Eurasport w ession eles Date and time i PEA QVC Deutschland programme with category duration and At this point you will be shown any age restrictions for the picture format highlighted programme if this is supplied by the channel provider Note If you selected a favorites list before opening the EPG the EPG will only show the data for the channels that are included in this favorites list Press the button again to display the EPG for all channels 59 Premium tv tv EPG Selection options remote control buttons in the EPG FAV J red button Call up the recording schedule display of all pre programmed recordings reminders Jt button Navigation in the individual views e g 15 minutes skip forward in the Current view OPT W yellow button Call up a preview of the currently selected channel Program guide Bola TVR J blue button Call up the category selection sorting the programs by categories such as movies sport series button P to jump forward 24 hours in the EPG P to jump
175. y can be called up using the button Changes to the current settings can be made using the Je buttons or the number pad Press the button to open the settings for the selected single cable system The following on screen display appears Refer to the documentation supplied with your system for the settings for the SCR frequencies and any PIN assigned to the tuner You will find there a printed list showing the assignment between the various SCRs and the respective transmission frequencies It may happen that you cannot freely select the PIN for protection of individual frequencies this also may be listed in the documentation for the single cable components Please note also that multiple receivers cannot share the same frequencies channels the receivers would interfere with each other Secure channel with PIN If your single cable system allows the transmission frequency to be protected by entering a PIN this is the menu where that can be done No other receiver can then use this transmission frequency unless the PIN is entered Select the setting On You then have the facility of using the number pad to enter a PIN code 0 255 in the line underneath Tuner PIN code Tuner transmission channel Select a free available transmission channel SCR 0 SCR 7 Tuner SCR Frequency transmission frequency Select here one of the free available transmission frequencies or enter the related frequency using the n
176. yed back is displayed The position of the playback information changes approx every five seconds Automatic channel name update Here you can use the j gt buttons to set whether when the name of a channel is changed the receiver automatically updates the name of the channel in the channel list setting On If the setting is Off the old channel name will be retained Antenna amp Satellite After calling up the menu you will see the following on screen display You can choose between various different Tuner Configuration ae menus Sat Finder Tuner Configuration Edit Satellites Edit Transponders Use the al v buttons to select the desired menu and confirm your selection using the button 126 Main Menu Settings SatFinder After calling up the menu you will see the following on screen display qj If you do not have a meter for adjusting iis as inant your reflector you can use the sat finder meals as an alignment aid However the sat finder is not a complete substitute for a meter The individual items are selected using the Lally buttons The changes to the current settings can be performed using the J buttons or the number pad Satellite Select the satellite on which the transponder to be tested is located Make sure your reception system is aligned to this these selected satellite s Frequency Use the J buttons transponder frequency already saved or the nu
177. your actual longitude My Latitude Select the My Latitude field and use the number pad to enter your current latitude Go to Null Position Select the Go to Null Position field Press the button to instruct the turntable to move to its null position Set Borders Select the Set Borders field In this menu you can set the borders for your turntable This is particularly necessary if the turntable has only a restricted range in which it can turn before striking an obstruction such as a wall or tree Press the button The following on screen display appears The following buttons allow you to control the movement of the turntable Start slow rotation to the West Rotate to the West step by step Stop the current movement Rotate to the East step by step Start slow rotation to the East 154 Tuner Configuration Once you have reached the desired East West limit switch to the respective field Set current position for border and press the button to confirm If you subsequently want to delete the set limits switch to the Reset border positions field and press the button to confirm deletion of the limits You can now set new limits Once you have set all the limits press the u button Select Satellites Select the Select Satellites field Select here which satellites you wish to receive via your turntable Pressing the button presents an on screen display

Kathrein UFS 912si

Contents

Download Pdf Manuals

Related Search

Related Contents