Chenbro Micom RM41416B
Contents
1. oowoowsES Soosse0008 Sgcnanoges joowooe We Single orn 1 Red Power Supply option System 1 0 depends on M B A CAUTION This unit must be operated with the chassis TOP COVER installed f to ensure proper cooling 1 Attach with 4 stand offs on bracket 5 Repeat step 1 4 for 2nd backplame location with S mark assembly and placement 2 Attach with 4 screws for each backplane assembly 3 Place backplane assembly along internal backplane guide rail 4 Attach with 2 screws on both sides of chassis 1 Insert the hard drive on the tray 2 Attach with four screws to fix HDD 3 Slide tray into chassis 4 Push the lever to latch HDD tray 74 123414 003 2005 11 364 0 mm 257 0 MM2. Major Components Removing amp Installing Fan Module Power Supply amp Card Retainer Screwless Top Cover 80mm Exhaust Fan option 80mm Exhaust Fan option 1 Attach with 10pcs screws for power supply Card Retainer 2 Attach with 8pcs screws for two exhaust fans 3 Release screw and move toward 2 right side then take outretainer by up direction Single or n 1 Redundant Power Supply option 2 SASS s SSS S al Standard ATX 0 1 Moving the latch until hook releasing Extended ATX M B 2 Pull up fan module then fan board 80mmHot Swap A NE al f J disconnecting Fan Module J ESNI 514 Standard CD ROM Nel 1 Hard Drive Tray 3 5 Internal Hard Drive s Front Control amp Indicators 1 Release screw then move 2 Release two screws to back and take out bracket detach CD ROM cover A HDD Tray Activity LED B USB 2 0 Port C System Reset Button D Alarm Mute Button E System HDD Activity LED F Power LED G Failure LED H LAN1 amp LAN2 LED Power Switch 3 Attach with four screws 4 Attach back original screw to fit CD ROM on bracket 1 Release screw then move back and 3 Fitto two gauge pins and move take out bracket forward until fasten 2 Attach with four screws to fit HDD FDD 4 Attach back original screw
Download Pdf Manuals
Related Search