Metra 99-3106 mounting kit
Contents
1. ATHWASSVSICO HSY MENT IA rr DASH DISASSEMBLY 2000 2002 SATURN SL Disconnect the negative battery terminal to prevent an accidental short circuit Remove 4 Phillips from panel below steering column and unclip and remove Figure A Remove 4 Phillips screws from the steering column trim panel and remove Figure B Remove 2 screws from the end cap vent on the left side of the steering column then unclip and remove Figure C Unclip and remove the entire dash panel surrounding the radio instru ment cluster and a c controls Figure D Remove 2 9 32 screws securing the head unit to remove Figure D Disconnect the negative battery terminal to prevent an accidental short circuit 2 Unsnap and remove shifter trim panel Figure A 3 Remove 4 9 32 screws from the dash pocket and remove Figure A 4 Unsnap and remove panel surround ing radio and a c controls Figure A 5 Remove 2 9 32 screws from radio to remove Figure A ATSHWIASSSVSICG HSY __ o 8106 99 3106 KIT ASSEMBLY 1 ISO DIN HEAD UNIT PROVISIONS Slide the radio housing brackets onto the radio housing Figure A Snap the pocket onto the back of the radio housing align the holes in the pocket with the holes in the radio housing brackets and mount with the 6 Phillips screws supplied Figure B Align the holes in the radio housing brackets with t2. INSTALLATION INSTRUCTIONS FOR PART 99 3106 APPLICATIONS SATURN 2003 05 Ion 2000 05 LS 2000 02 SL 2002 05 Vue Fy KIT FEATURES e Double DIN Head Unit Provisions with Pocket e ISO DIN Head Unit Provisions with Pocket KIT COMPONENTS TOOLS REQUIRED Socket Wrench Flat Blade Screwdriver e Phillips Screwdriver Cutting Tool re 1 800 221 0932 www metraonline com Rev 06 14 07 COPYRIGHT 2004 2007 METRA ELECTRONICS CORPORATION INST99 3106 _ D Dash Disassembly f 2003 2005 Saturn JOM wasaccucucucususunuuuneueueuegs 1 2000 2005 Saturn LS wscuuuccuuuucuuuneaunneuunneagy 1 P 2000 2002 Saturn SL wasaucucueucususuuanuneueueueas 2 iT 2002 2005 Saturn Vue was cccucucususunuuuueneueueugas 3 P Kit Assembly ISO DIN head unit provisions 1 cccccccucuucuaeuaeuane 4 Led Double DIN head unit provisions 111111111111112 5 Le Final Assembly wiccccccuseuseuccccecsusensecaeugeas 6 LL 5 2003 2005 SATURN ION 1 Disconnect the negative battery terminal to prevent an accidental short circuit 2 Unclip and remove the trim panel surrounding the radio Figure A 3 Remove 2 9 32 screws from radio to remove Figure A f0O000 2005 SATURN LS 1 Disconnect the negative battery terminal to prevent an accidental Short circuit 2 Unclip and remove the trim panel surrounding the radio Figure B 3 Remove 2 9 32 screws from radio to remove Figure B
3. he holes in the ISO DIN head unit and secure the brack ets to the head unit with the screws included with the unit Figure C MENTA _ DOUBLE DIN HEAD UNIT PROVISION 1 Cut and remove the center bar on the radio housing A the protruding bracket tabs B the bracket sockets C and the locating pins on the back of the radio housing D Figure A 2 Slide the radio housing brackets onto the sides of the radio housing Figure A ATHWASSV LIM 3 Align the holes in the radio housing brackets with the holes in the DDIN head unit and secure the brackets to the head unit with the screws included with the unit Figure B _ _ INSTS9 3106 FINAL ASSEMBLY 1 Strip wire ends back 1 2 Twist ends together Solder Tape Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter and making the connections as shown Isolate and indi vidually tape off the ends of any unused wires to prevent electrical short circuit Re connect the negative battery terminal and test the unit for proper operation Reassemble radio and dash assemblies in reverse order of disassembly
Download Pdf Manuals
Related Search