Chief PSM2095 flat panel wall mount
Contents
1.2. INSTALLATION INSTRUCTIONS PLASMA DISPLAY STATIC MOUNT PSM 2091 PSM 2092 amp PSM 2095 Figure 1 1 Plasma Static Mount 1 10 24 x 5 FH Socket Screw 1 Latching Flag 1 10 24 Nylock Nut 1 Nylon Washer BEFORE PROCEEDING Unpack the carton verify contents shown in Figure and read installation instructions completely If you are missing any of the listed components please contact Customer Service at 1 800 582 6480 CAUTION PLASMA DISPLAYS ARE EXTREMELY FRAGILE The PSM 2091 2092 and 2095 is designed so one mount will work for the Sony PFM32 Sony PFM42 and Sony PFMS50 plasma displays There are 3 mounting patterns on the mount corresponding to the mounting button pattern on the back of the respective plasma On one side of the mount has patterns for the 32 and 42 inch plasma and the other side has the mounting pattern for the 50 inch plasma The latching flag must be attached to the mount in the proper location for each individual plasma 1 Attach latching flag to mount utilizing the proper position on the mount with the latching flag on the inside of the mount Tighten Nylock nut until friction is sufficient to hold the latch in place see Figure 2 Figure 3 Figure 4 amp Figure 5 LATCH MOUNTING POSITION LATCH MOUNTING POSITION LATCH ili tore FOR 50 PLASMA i W S i T a wW D NAS t Jai NUT NYLON PHILIPS HEAD WASHER LATCHING SCREW FLAG Piguie 2 Figure 3 Figure 4 Eire
3. 5 CHIEF MANUFACTURING INC 8805 000043 N 1 800 582 6480 952 894 6280 FAX 952 894 6918 2003 Chief Manufacturing 8401 EAGLE CREEK PKWY STE 700 www chiefmfg com SAVAGE MINNESOTA 55378 USA 08 04 CHIEF NF W ARNIN G ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED IF IT CANNOT SUPPORT THIS WEIGHT THE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 175 POUNDS 79 38KG 2 Mount plasma static mount onto wall utilizing wall studs or supporting framework with the proper face of the mount away from the wall for the respective plasma see WARNING Figure 6 amp Figure 7 ATTACH MOUNT TO WALL IN THIS MANNER FOR THE 32 AND 42 INCH PLASMAS ATTACH MOUNT TO WALL IN THIS MANNER FOR THE 50 PLASMA ATTACH TO WALL UTILIANG ATTACH TO WALL UTILIZING THESE MOUNTING HOLES THESE MOUNTING HOLES Figure 6 Figure 7 3 Turn latching flag to the side prior to placing plasma in place 4 With the aid of another person lift plasma display up to the Chief mount aligning mounting buttons with the teardrop slots dependent upon the model plasma see Figure 8 amp Figure 9 USE INSIDE SLOTS FOR 32 PLASMA i ie Salata USE OUTSIDE SLOTS FOR 42 PLASMA p IE Figure 8 Figure 9 5 Raise safety latch to secure plasma in place see Figure 10 USE THESE SLOTS OR 50 PLASMA Figure 10
Download Pdf Manuals
Related Search