Gefen EXT-DVI-EDIDN
Contents
1. on the DVI Detective The power LED should be glowing solid Once you are ready to program the EDID press the Program button on the front panel of the DVI Detective to initiate the recording sequence The power LED will begin to flash and when it turns solid again the programming sequence is complete Remove the 5V DC power supply from the DVI Detective At this time it is recommended that you write protect the DVI Detective Please see the next page for instructions on this procedure Connect your source to the DVI IN port on the DVI Detective Note If using a PC restart your computer only after you have made all the connections WRITE PROTECTING THE DVI DETECTIVE Write protection switch Once the DVI Detective is programmed and working you can write protect the unit to prevent an accidental overwrite This is done by simply moving the write protect switch to the D write disabled position By default the unit is shipped in the E write enabled position This is done so that the unit is ready to be programmed right out of the box Whenever the unit is going to be programmed make sure that the switch is in the E position otherwise the procedure will fail 5 SPECIFICATIONS Video Amplifier Bandwidth 165 MHz Input Video Signal 1 2 volts p p Input DDC Signal 5 volts p p TTL Maximum Res 1920 x 1200p60 DVI I O Connector Type DVI2. reboot the operating system The entire installation process benefits from the DVI Detective which utilizes a much smaller cable that requires fewer connections it makes life easier for those extending digital displays or projectors An inconspicuous device that weighs less than one pound The Detective can con nect to a DVI port or ADC port with the use of an adapter It works with all digital displays DVI as well as Apple s line of flat panel displays ADC Even analog display EDID s can be used with the DVI Detective by using VGA to DVI adapters on the input and output ports of the DVI Detective FEATURES Features No power required after initial pro gramming Keeps computer systems from deactivating inactive DVI ports Maintains highest Single Link and Dual Link resolutions Works with all digital and analog displays Installs in seconds Includes 1 DVI Detective 1 1 DVI cable m m 1 5VDC Power Supply 1 User s Manual Note the supplied DVI D cable does not support analog VGA PANEL LAYOUTS Front Panel Programming DVI Source Power LED utton In Indicator Back Panel t i DVI Out ve i m E DVI Output Write Protection Switch CONNECTING AND OPERATING THE DVI DETECTIVE Before proceeding please ensure that the write protect switch is in the E write enabled position Please see the diagram on the next page Connect your display to the DVI OUT port
3. DVI Detective EXT DVI EDIDN USER MANUAL Detective www gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday PST Write To Gefen Inc C O Customer Service 20600 Nordhoff St Chatsworth CA 91311 support gefen com www gefen com Notice Gefen Inc reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice The DVI Detective is a trademark of Gefen Inc 2009 Gefen Inc All Rights Reserved All trademarks are the property of their respective owners Rev X2 TABLE OF CONTENTS Introduction Features Panel Layouts Connecting and Operating the DVI Detective Write Protecting the DVI Detective Specifications Warranty INTRODUCTION The DVI Detective is a unique and useful little device that reads and stores a com puter s digital video information EDID in order to simplify the installation process for users who are extending a digital projector or plasma display away from the computer Once installed and connected the DVI Detective continually transmits the EDID to the computer essentially tricking the computer into thinking that the video is present even when it is not connected The user can then disconnect the display place it in a remote location and reconnect it without having to
4. I Power Consumption 5 Watts max Power Supply sesser 5VDC Dimensions 2 W x 1 7 H x 1 75 D Shipping Weight 2 Lbs WARRANTY Gefen Inc warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen Inc is notified within two 2 year from the date of shipment Gefen Inc will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications The two year warranty is only valid on new products purchased as of January 2007 All products purchased before this date still retain their 1 year warranty Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed Please note that 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition For the latest warranty c
5. overage information please visit Gefen s Warranty page at http www gefen com kvm aboutus warranty jsp PRODUCT REGISTRATION Please register your product online by visiting Gefen at http www gefen com kvm Registry Registration jsp The information in this manual has been carefully checked and is believed to be accurate However Gefen Inc assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen Inc be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the DVI Detective Plus features and specifications is subject to change without notice CE x Rev X2 z CH CH mmm CH xMA 20600 Nordhoff Street Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com Ph R As
Download Pdf Manuals
Related Search