Philips HTS5560
Contents
1. 1 Press O40 Sound options Press the Navigation buttons left right to access the sound options Sound Description experience AUTO Sets a constant output signal at VOLUME the speaker output This option is best for TV audio input where the commercial signal level is usually higher than the content SOUND SURROUND Selects a sound mode Selects a surround sound or stereo sound TREBLE Adjusts the high frequency output MID Adjusts the middle frequency output BASS Adjusts the low frequency output AUDIO SYNC Delays the audio to match the video 3 Select an option then press OK 4 Press 9 Back to exit If you do not press a button within five seconds it automatically exits the menu Change auto volume Select the level of volume output from your TV or other devices to the home theatre Press 080 Sound options Select AUTO VOLUME then press OK 3 Press the Navigation buttons up down to select ON or OFF Press OK to confirm your choice EN 11 English Change sound mode Select predefined sound modes to suit your video or music 1 Press O40 Sound options 2 Select SOUND then press OK 3 Press the Navigation buttons up down to select the following settings e ACTION ROCK Enhanced low and high range Ideal for action movies and rock or pop music e DRAMA JAZZ Clear mid and high range Ideal for drama movies and jazz MUSIC2. e Ensure that the disc contains high definition video e Ensure that the TV supports high definition video Sound No sound e Ensure that the audio cables are connected and select the correct input source for example AUDIO SOURCE for the device you want to play No sound on HDMI connection e You might not hear any sound if the connected device is not HDCP High bandwidth Digital Content Protection compliant or only DVI compatible Use an analogue or digital audio connection Ensure that the HDMI Audio is enabled No sound from TV programme e Connect an audio cable from the audio input on the home theatre to the audio output on the TV then press AUDIO SOURCE repeatedly to select the correct audio source Distorted sound or echo e Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theatre Audio and video are not synchronised e 1 Press B0 Sound options 2 Press the Navigation buttons left right repeatedly until AUDIO SYNC is displayed then press OK 3 Press the Navigation buttons up down to sync the audio with the video Play Disc cannot be played e Clean the disc e Ensure that the home theatre supports the disc see Product specifications on page 21 e Ensure that the home theatre supports the region code of the disc e For DVD RW or DVD R ensure that the disc is finalised
3. Change advanced settings Press amp Home Select Setup then press OK Select Advanced Setup then press OK Select and adjust the following settings e BD Live Security Restricts or allows access to BD Live AWN e Enhanced Audio Enables or disables the audio post processing at the speaker output Software Update Selects to update software from the network or from a USB storage device e Clear memory Clears local memory deletes the BD Live files that you previously downloaded If using a USB storage device the local storage folder is BUDA e DivX VOD Code Displays the DivX VOD registration code for the home theatre e Version Info Displays the software version for the home theatre e Restore default settings Resets the home theatre to the default settings programmed at the factory 5 Press OK to confirm your choice e You cannot restrict Internet access on commercial Blu ray discs e Before you purchase DivX videos and play them on the home theatre register the home theatre on www divx com using the DivX VOD code e You cannot reset the parental control setting to its default value EN 19 English 7 Update software To check for new updates compare the current software version of your home theatre with the latest software version if available on the Philips website Check software version 1 Press Home
4. Play from PC DLNA Network Link For HTS5580 and HTS5590 only The home theater is Digital Living Network Alliance DLNA certified It allows you to listen to music view photo files and watch video files that are stored on your computer through the home theater Set up media server software Your computer must be installed with media server software that is configured for media sharing For more information see the instructions for the media server software Connect the home theatre to a network router Switch on the computer and router Open Windows Media Player on the computer Select Library gt Media Sharing then select settings to share your media Select Library gt Add to Library then select settings to share the folder containing your media 6 Select Library gt Apply Media Information Changes to activate the changes Mm AWN Play multimedia content For HTS5580 and HTS5590 only Note e Before playing multimedia content from the computer ensure that the home theatre is connected to the computer network and the media server software is properly set up 1 Press amp Home Ly The home menu appears Select Browse PC then press OK i gt A content browser appears English Select a file then press OK Aw N Press the playback buttons to control play see Play a disc on page 12 Play from radio The home theatre can store up to 40 radio
5. Use video options Access several useful features while viewing video Note e Available video options depend on the video source Press B Options Ly The video options menu appears 2 Press the Navigation buttons and OK to select and adjust e Audio Language Selects audio language for video e Subtitle Language Selects subtitle language for video e Subtitle Shift Adjusts the subtitle position on the screen e Info Displays information about what is playing e Character Set Selects a character set that supports the DivX subtitle e Time Search Skips to a specific part of the video by entering the time of the scene e 2nd Audio Language Selects the second audio language to play e 2nd Subtitle Language Selects the second subtitle language to play e Titles Selects a specific title e Chapters Selects a specific chapter e Angle List Selects a different camera angle e Menus Displays the disc menu e PIP Selection Displays Picture in Picture window Zoom Zooms into a video scene or picture Press the Navigation buttons left right to select a zoom factor Repeat Repeats a chapter or title Repeat A B Marks two points within a chapter or track for repeat play or turns off repeat mode Picture Settings Selects a predefined colour setting Note e Subtitle shift is only
6. 2 Select AUDIO SYNC then press OK 3 Press the Navigation buttons up down to sync the audio with the video 4 Press OK to confirm Play a disc The home theatre can play a wide variety of discs including video audio and mixed media for example a CD R that contains JPEG pictures and MP3 music 1 Insert a disc into the home theatre 2 Press DISC or select play disc in the home menu and press OK Ly The disc plays or the disc main menu appears 3 Press the following buttons to control play Button Action Navigation Navigate menus buttons OK Confirms an entry or selection gt Play Starts or resumes play HI Pauses play a Stops play 4 gt Skips to the previous or next track chapter or file A gt Fast backwards or fast forwards Press repeatedly to change the search speed n pause mode steps forward by one frame A V Rotates the picture anti clockwise or clockwise SUBTITLE Selects subtitle language for video QO Disc Accesses or exits the disc menu menu B Options Accesses more play options during playback Use Bonus View on Blu ray Blu ray discs that support the Bonus View feature also known as Picture In Picture allow you to view special content such as a director s commentary while watching the main feature f necessary enable BonusView or Picture n Picture in the Blu ray disc menu 2 During playback of the main feature press B Options Ly
7. Selects subtitle language for video e Disc Menu Selects menu language for video disc e Parental Control Restricts access to discs that are recorded with ratings To play all discs irrespective of the rating select level 8 e Screen Saver Enables or disables screen saver mode If enabled the screen enters idle mode after 10 minutes of inactivity for example in pause or stop mode e Auto Subtitle Shift Enables or disables shift subtitle If enabled it adjusts the subtitle position automatically to fit the TV screen e Change Password Sets or changes a PIN code to play a restricted disc Enter 0000 if you do not have a PIN or if you have forgotten your PIN e Display Panel Changes the brightness of the display panel e Auto Standby Enables or disables auto standby If enabled the home theatre switches to standby after 30 minutes of inactivity for example in pause or stop mode e VCD PBC Displays or skips the content menu for VCD and SVCD discs e Sleep Timer Sets a sleep timer to switch the home theatre to standby after a specific time 5 Press OK to confirm your choice e e lf you select a language that is not available on a disc the home theatre uses the default language of the disc e Subtitle shift is only available if the TV Display setting of the home theatre is set to 21 9 Cinema and the TV supports this feature
8. Ensure that the Blu ray disc supports BD Live features The video movies photos video clips etc contents of the iPod iPhone do not display on TV e Video and photo browsing is not supported you can only browse the video and photo contents on the iPod iPhone itself Cannot see pictures from my iPod iPhone on the TV e Connect a yellow composite cable from the dock to the TV e Switch the TV to the AV VIDEO source corresponding to the yellow composite cable e Press PLAY on the iPod or iPhone to start the slideshow EN 23 English 10 Index A amplifier 21 audio connection 9 language 19 settings 18 synchronise with video 12 audio input mapping 17 18 B BD Live access 13 set up 13 Bonus View 13 C care 4 change settings 17 chapter 14 connect audio from TV 9 16 guide 7 network 10 other devices 9 TV 8 wireless module 9 connectors a contact us 22 D disc play 12 supported discs 21 disposal of your product 5 DivX character set 14 E EasyLink settings 17 18 F file formats 21 24 EN H HDMI CEC see Easylink 17 Internet BD Live 13 connect 10 software update 20 iPod play 16 L language audio 14 19 disc menu 19 on screen display 19 subtitle 14 19 M media server software set up 15 MP3 play 16 N network connect 10 set up 13 software update 20 O one touch play 17 18 one touch standby 17 18 overview connectors 7 main unit 5 remote control 6 P password P
9. If not disconnect the power cord for a few seconds and then reconnect it Caution Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage the home theatre 8 Product specifications Note e Specification and design are subject to change without notice Region code The type plate on the back or bottom of the home theatre shows which regions it supports Country DVD BD Europe United Kingdom Asia Pacific Taiwan Latin America Australia New Zealand Russia India China Playback media e AVCHD BD RE BD Video DVD Video DVD R RW DVD R RW DVD R R DL CD R CD RW Audio CD Video CD SVCD Picture CD MP3 CD WMA CD DivX Ultra CD USB storage device File Format e Audio mp3 wma wav e Video avi divx mp4 mkv mov wmv e Picture jpg gif png Amplifier e Total output power 1000 W RMS 30 THD e Frequency response 20 Hz 20 kHz 3 dB e Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity e AUX 900 mV e MP3 LINK 500 mV Video e Signal system PAL NTSC e Component video output 480i 576i 480p 576p 720p 10801 e HDMI output 4801 576i 480p 576p 720p 10801 1080p 1080p24 Audio e S PDIF Digital audio input e Coaxial IEC 60958 3 Sampling frequency MP3 32 kHz 44 1 kHz 48 kHz
10. 2 Select Setup then press OK 3 Select Advanced Setup gt Version Info then press OK Ly The software version is displayed Update software from the network 1 Prepare the Internet connection 2 Press Home and select Setup 3 Select Advanced Setup gt Software Update gt Network Setup Ly If upgrade media is detected you are prompted to start or cancel the update 4 Follow the instruction on the TV to confirm the update Ly When complete the home theatre automatically switches off and on again If not disconnect the power cord for a few seconds and then reconnect it Note e Ifthe home theatre is unable to connect to the Philips server press Home and select Setup gt Network Setup gt Network Installation to set up the network 20 EN Update software from a USB device 1 Check for the latest software version on www philips com support Search for your model and click on software amp drivers Create a folder named UPG on your USB storage device Download the software into the UPG folder Unzip the software in the UPG folder Connect the USB storage device to the home theatre Press Home and select Setup Select Advanced Setup gt Software Update gt USB Follow the instructions on the TV to confirm the update Ly When complete the home theatre automatically switches off and on again COND UB W N
11. 7 392 195 7 272 567 7 333 929 7 212 872 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks and DTS HD DTS HD Master Audio Essential and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved Q1 DOLBY TRUEIL Manufactured under licence from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Divx and DivX Ultra are registered trademarks of DivX Inc and are used under licence DivX Ultra Certified to play DivX video with advanced features and premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in your device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD English Ag Plays BB Mess Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the Un
12. DVD 790 15 nm 15 nm CD e Output power Max ratings 20 mW BD 7 mW DVD CD 22 EN 9 Troubleshooting WN Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself f you have problems using this product check the following points before you request service If you still have a problem register your product and get support at www philips com welcome If you contact Philips you will be asked for the model and serial number of your product The model number and serial number are on the back or bottom of your product Write the numbers here Model No Serial No Main unit The buttons on this home theatre do not work Disconnect the home theatre from the socket for a few minutes then reconnect Picture No picture e Ensure that the TV is switched to the correct source for the home theatre No picture on HDMI connection e Change the HDMI video setting or wait for 15 seconds for auto recover e Check whether the HDMI cable is faulty Replace with a new HDMI cable No picture on the Component Y Pb Pr connection e Ifthe HDMI video connection is set to Auto or 1080p 24Hz there is no video output through the component connection Change the HDMI video setting or remove the HDMI connection No high definition video signal on the TV
13. DivX video files cannot be played e Ensure that the DivX file is encoded according to the Home Theatre Profile with the DivX encoder e Ensure that the DivX video file is complete DivX subtitles do not display correctly e Ensure that the subtitle file name is the same as the movie file name e Select the correct character set 1 Press B Options 2 Select Character Set 3 Select the supported character set 4 Press OK The contents of a USB storage device cannot be read e Ensure that the format of the USB storage device is compatible with the home theatre 7 Ensure that the USB storage device is formatted with a file system that is supported by the home theatre note that NTFS is not supported No entry or x sign appears on the TV e he operation is not possible EasyLink feature does not work e Ensure that the home theatre is connected to a Philips brand EasyLink TV and that EasyLink is on do not want my home theatre to be switched on when I switch on my TV e This is the correct behaviour for Philips EasyLink HDMI CEC To make the home theatre work independently switch off EasyLink cannot access BD Live features Check the network connection or ensure that the network has been set up see Set up network on page 13 e Clear memory storage see Change advanced settings on page 19 e
14. e WMA 44 1 kHz 48 kHz e Constant bit rate e MP3 112 kbps 320 kbps e WMA 48 kbps 192 kbps Radio e Tuning range FM 87 5 108 MHz 50 kHz e Signal to noise ratio FM 50 dB e Frequency response FM 180 Hz 12 5 kHz 3 0B English USB e Compatibility Hi Speed USB 2 0 e Class support UMS USB Mass Storage Class File system FAT16 FAT32 e Maximum memory support lt 160 GB Main Unit e Power supply 220 240V 50 Hz e Power consumption 135 W e Standby power consumption lt 0 9 W e Dimensions W x H x D 435 x 58 x 358 mm e Weight 3 87 kg EN 21 Subwoofer e Impedance 3 ohm e Speaker drivers 165 mm 6 5 woofer e Frequency response 40 Hz 150 Hz e Dimensions WxHxD 196 x 395 x 342 mm e Weight 5 25 kg e Cable length 4 m Speakers e System full range satellite e Speaker impedance 3 ohm centre 5 ohm Front Rear e Speaker drivers 2 x 3 full range e Frequency response 150 Hz 20 kHz e Dimensions W x H x D e Centre 280 x 95 x 92 mm e Speaker 100 x 280 x 115 mm e Tall speaker 260 x 1101 x 260 mm e Weight e Centre 1 40 kg e Speaker 0 98 1 05 kg each e Tall speaker 3 73 3 81 kg each e Cable length e Centre 3 m Front 4 m Rear 10 m Laser Specification e Laser Type Diode InGaN AlGaN BD InGaAIP DVD A IGaAs CD e Wave length 405 5 nm 5 nm BD 650 13 nm 10 nm
15. available if the TV Display setting of the home theatre is set to 21 9 Cinema and the TV supports this feature Use picture options Access several useful features while viewing pictures 1 Press Options Ly The pictures options menu appears 2 Press the Navigation buttons and OK to select and adjust Rotate 90 Rotates the picture 90 degrees clockwise Rotate 90 Rotates the picture 90 degrees anti clockwise Zoom Zooms into a video scene or picture Press the Navigation buttons left right to select a zoom factor Info Displays picture information Duration per slide Sets the display speed for each picture in a slide show Slide Animation Selects animation for the slide show Picture Settings Selects a predefined colour setting Use audio options Access several useful features while audio is played Press amp Options repeatedly to cycle through the following functions REPEAT TRACK Repeats the current track REPEAT DISC Repeats all the tracks on the disc or folder REPEAT RANDOM Plays audio tracks in random order REPEAT OFF Turns off repeat mode Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow Select a music track then press OK Press 5 Back and go to the picture folder Select a picture then press OK to start slideshow Press W to stop slideshow mK WN Press W again to stop music
16. e CONCERT CLASSIC Neutral sound deal for live concerts and classical music SPORTS Moderate mid range and surround effects for clear vocals and the atmosphere of a live sports venue e NIGHT Dynamically controlled sound mode suitable for watching movies at night or for non intrusive background music 4 Press OK to confirm your choice Change surround sound mode Experience an immersive audio experience with surround sound modes 1 Press O40 Sound options 2 Select SURROUND then press OK 3 Press the Navigation buttons up down to select the following settings e 5CH STEREO Enhances the stereo channel output by duplicating the sound output to the centre and rear speakers Ideal for party music e MULTI CHANNEL DPL II Immersive multi channel sound for an enhanced movie experience STEREO Two channel stereo sound Ideal for listening to music 4 Press OK to confirm your choice Change treble mid and bass Change the high frequency treble mid frequency mid and low frequency bass settings of the home theatre to suit your video or music 1 Press 000 Sound options P 2 Select TREBLE MID or BASS then press OK 12 EN 3 Press the Navigation buttons up down to adjust the frequency level 4 Press OK to confirm Synchronise audio with video If the audio and video are not synchronized you can delay the audio to match the video 1 Press O40 Sound options
17. IN code 19 picture options 14 rotate 14 slide show 15 14 troubleshooting 22 picture in picture 2nd audio language 2nd subtitle language enable play disc MP3 player multimedia content options radio troubleshooting USB storage device product care product specifications R radio play programme tune recycle region code remote control repeat rotate pictures S safety settings audio EasyLink parental control preferences video slideshow animation duration software update version sound auto volume mode surround treble and bass troubleshooting subtitle language subtitle shift system audio control 14 14 LO W w x x N gt BWW UN UO YN No x NJ 0 10 F time search video 14 title 14 troubleshooting 22 TV audio from TV 9 16 connect 8 U USB play 13 software update 20 V video options 14 settings 17 synchronise with audio 12 EN 25 English
18. Register your product and get support at www philips com welcome HTS5560 HTS5580 HTS5590 PHILIPS Contents 1 Notice 2 Copyright 2 Compliance 2 Mains fuse UK only 2 Open Source Software 2 Trademarks 2 2 Important 4 Safety 4 Product care 4 Disposal of your old product and batteries 5 3 Your home theatre 5 Main unit 5 Remote control 6 4 Connect your home theatre 7 Connectors 7 Connect to the TV 8 Connect audio from TV or other devices 9 Connect a wireless module 7 Connect to a computer network and the Internet 10 5 Use your home theatre 11 Before you start 11 Access the home menu 11 Choose your sound 11 Play a disc 12 Use Bonus View on Blu ray 13 Access BD Live on Blu ray 13 Play from a USB storage device E More play features for disc or USB 14 Play from PC DLNA Network Link 15 Play from radio 15 Play audio from TV or other devices 16 Play from an MP3 player 16 Play from an iPod or iPhone 16 Use Philips EasyLink 17 6 Change settings 17 Access the setup menu 17 Change video settings 17 Change audio settings 18 Set up network 18 Set up EasyLink 18 Change preference settings 19 Change advanced settings 19 7 Update software 20 Check software version 20 Update software from the network 20 Update software from a USB device 20 8 Product specifications 21 9 Troubleshooting 22 10 Index 24 EN 1 English 1 Notice Copyright Be responsible Respect copyr
19. TV Use Philips EasyLink The home theatre supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices th Switch on the HDMI CEC operations on the TV and other connected devices See the manual of the TV or other devices for details Press Home Select Setup then press OK Select EasyLink Setup gt EasyLink then press OK Select On then press OK You can now enjoy the following Philips EasyLink controls om AWN One touch play When you play a disc the TV automatically switches to the correct channel One touch standby When you press and hold Standby on the remote control the home theatre and all the connected HDMI CEC devices if they support one touch standby switch to standby mode simultaneously System Audio Control When you play a device that has its audio output routed to the home theatre the home theatre switches to the corresponding audio source automatically To use one touch audio enable this feature and follow the instructions on the TV to map the connected devices correctly to the audio input jacks of the home theatre Audio Input Mapping Updates audio input mapping if there are new devices conne
20. The options menu is displayed 3 Select PIP Selection gt PIP then press OK tL PIP options 1 2 depend on the video contents Ly The picture in picture video appears in a small window 4 Select 2nd Audio Language or 2nd Subtitle Language then press OK 5 Select the language to play then press OK Note e To turn off the Bonus View Picture in Picture press B Options select PIP Selection gt Off then press OK Access BD Live on Blu ray BD Live enabled Blu ray discs include exclusive services such as movies and other online bonuses Set up network Connect the home theatre to a broadband modem or router Turn on your TV and switch to the correct source for the home theatre Press Home Select Setup then press OK Select Network Setup gt Network Installation then press OK Select Wired Ethernet then press OK Select Auto Setup or Manual Setup then press OK Follow the instructions on the TV to complete the setup tL The home theatre connects to the Internet If connection fails select Retry then press OK 9 Select Finish then press OK to exit COND URW N gt a Use BD Live 1 2 4 5 Before using BD Live ensure that the home theatre is connected to the Internet and that network access is properly set up English Connect the USB storage device to the home theatre Select the BD Live icon in the dis
21. ay audio files Play from an iPod or iPhone By connecting and installing a Philips Dock for iPod iPhone you can use the home theatre to play music movies and photos from your iPod or iPhone Note e Philips Dock for iPod iPhone is sold separately e You can charge your iPod iPhone on the dock while the home theatre is in iPod mode Dock your iPod or iPhone 1 Connect the dock to the home theatre and connect the yellow composite cable from the dock to the TV For more information see the Quick Start provided with the dock 2 Switch on the iPod or iPhone and place it in the dock On the home theatre remote control press f Home then select Browse iPod and press OK Listen to music 1 Dock your iPod or iPhone see Dock your iPod or iPhone on page 16 2 Press DOCK for iPod on the home theatre remote control Ly The playlists are displayed on the TV 3 Press the Navigation buttons and OK to select and play tracks Watch video or view slideshows Note On iPod enable the TV ON setting On iPhone select the TV Out option 1 Dock your iPod or iPhone see Dock your iPod or iPhone on page 16 2 Switch the TV to the AV VIDEO source corresponding to the yellow composite cable L gt TheTV screen goes blank 3 Browse on the iPod or iPhone screen to select videos or photos 4 Press gt Play to play the video and photos tL The picture is displayed on the
22. c menu then press OK tL BD Live starts to load The loading time depends on the disc and your Internet connection Press the Navigation buttons to navigate BD Live Press OK to select an item The range of BD Live services depends on the disc When you use BD Live data on the disc and home theatre are accessed by the content provider Use a USB storage device with at least 1 GB of free space to store the downloaded files If there is insufficient memory to download BD Live content clear local storage space Play from a USB storage device The home theatre is fitted with a USB connector that allows you to view pictures listen to music or watch movies stored on a USB storage device 2 3 4 5 Connect the USB storage device to the home theatre Press f Home Ly The home menu appears Select Browse USB then press OK L A content browser appears Select a file then press OK Press the playback buttons to control play see Play a disc on page 12 If the USB storage device does not fit into the connector use a USB extension cable The home theatre does not support digital cameras that need a computer program to display photos The USB storage device must be FAT or DOS formatted and Mass Storage Class compliant EN 13 More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device
23. cable or connector might be labelled COAXIAL DIGITAL OUT or SPDIF OUT Cable not supplied DIGITAL IN COAXIAL IN Connect a wireless module Note e When a wireless module is connected and switched on the rear speakers of the home theatre will be muted and the rear surround sound output to the wireless surround speakers Wireless module not supplied WIRELESS REAR AUDIO English Connect to a computer network and the Internet Connect the home theatre to a computer network and enjoy What you need Multimedia content streamed from your computer view photos play music and watch video files streamed from your computer see Play from PC DLNA Network Link on page 15 BD Live applications access to some exclusive services from the BD Live enabled Blu ray discs see Access BD Live on Blu ray on page 13 Software update update the software of the home theatre through the network see Update software from the network on page 20 A network router with DHCP enabled A network cable RJ45 straight cable A computer with media server software installed see Set up media server software on page 15 The computer must be connected to the network router via a wired or wireless network connection For BD Live application and software updates make sure that the network router has access to the Internet and is not restricted b
24. confirm your choice Set up EasyLink Press Home Select Setup then press OK Select EasyLink Setup then press OK AWN Select and adjust the following settings e EasyLink Enables or disables EasyLink e One Touch Play Enables or disables One Touch Play If enabled you can use the remote control to start disc play in the home theatre and the TV switches automatically to the correct channel e One Touch Standby Enables or disables One Touch Standby If enabled the home theatre can be switched to standby by a remote control from the TV or other connected HDMI CEC devices e System Audio Control Enables or disables System audio control If enabled follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theatre The home theatre switches automatically to the audio source of the connected device e Audio Input Mapping Updates audio input mapping if there are new devices connected 5 Press OK to confirm your choice Note e The connected devices must be connected through HDMI and switched on Change preference settings Press Home Select Setup then press OK Select Preference Setup then press OK ARWN Select and adjust the following settings e Menu language Selects the on screen display menu language e Audio Selects audio language for video e Subtitle
25. ct Risk of contamination e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed of properly Product care e Do not insert any objects other than discs into the disc compartment Do not insert warped or cracked discs into the disc compartment e Remove discs from the disc compartment if you are not using the product for an extended period of time e Only use microfibre cloth to clean the product Disposal of your old product and batteries Z Your product is designed and manufactured with high quality materials and components which can be recycled and reused R When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health ps4 Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yo
26. cted 6 Change settings This section helps you to change the settings of your home theatre English Caution e Many of the settings are already configured with the best value for the home theatre Unless you have a specific reason to change a setting it is best to leave it at the default value Access the setup menu 1 Press Home 2 Select Setup then press OK L gt The setup menu appears 3 Select a setup menu then press OK See the following sections for information about how to change the settings of your home theatre 4 Press 3 Back to return to the previous menu or press to exit Note e You cannot change a setting that is greyed out Change video settings Press Home Select Setup then press OK Select Video Setup then press OK Select and adjust the following settings e TV Display Selects a picture display format to fit the TV screen e HDMI Video Selects the HDMI video resolution e HDMI Deep Colour Displays colours with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature AWN EN 17 e Component Video Selects the component video resolution Copy protected DVDs can display only 480p 576p or 480i 576i e Picture Settings Selects a predefined colour setting 5 Press OK to confirm your choice e The best setting is automatically selected for the TV If
27. exits the disc menu 4 Navigation buttons e Navigates menus e In radio mode press left or right to start auto search G 4 gt i Previous Next e Skips to the previous or next track chapter or file In radio mode selects a preset radio station OK Confirms an entry or selection O 080 Sound options Accesses or exits various sound options B Options e Accesses more play options during playback e In radio mode programmes radio stations gt Play Starts or resumes play Volume Increases or decreases volume Il Pause Pauses play Source buttons Colour buttons e Blu ray discs Selects tasks or options e AUDIO SOURCE Selects an audio input source e DOCK for iPod Switches to Philips Dock for iPod iPhone e RADIO Switches to FM radio e DISC Switches to disc source 43 Alphanumeric buttons Enters values or letters using SMS style entry TOP MENU Accesses the main menu of a video disc 5 SUBTITLE Selects subtitle language for video m Stop e Stops play In radio mode erases the current preset radio station GD amp Mute Mutes or restores volume lt 44 gt gt Fast Backward Fast Forward Fast backwards or fast forwards Press repeatedly to change the search speed gt Back Returns to a previous menu screen 4 Connect your home theatre English This section helps you connect your
28. home theater to a TV and other devices The basic connections of the home theatre with its accessories are provided in the Quick Start For a comprehensive interactive guide see www connectivityguide philips com e Refer to the type plate at the back or bottom of the product for identification and supply ratings e Before you make or change any connections ensure that all devices are disconnected from the socket Connectors Front connectors MP3 LINK os m D o 1 MP3 LINK Audio input from an MP3 player 2 lt USB Audio video or picture input from a USB storage device Back connectors 4 AC MAINS Connects to the power supply 2 SPEAKERS Connects to the supplied speakers and subwoofer EN 7 3 DIGITAL IN COAXIAL Connects to the coaxial audio output on the TV ora digital device AUDIO IN AUX 1 AUX 2 Connects to the analogue audio output on the TV or an analogue device LAN Connects to the LAN input on a broadband modem or router VIDEO OUT VIDEO Connects to the composite video input on the TV VIDEO OUT Y Pb Pr Connects to the component video input on the TV FM ANTENNA FM 75Q Connects the FM antenna for radio reception HDMI OUT Connects to the HDMI input on the TV DOCK for iPod Connects to a Philips Dock for iPod iPhone Sold separately WIRELESS REAR AUDIO Connects to a Philips wireless m
29. ights This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorised by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation Reverse engineering or disassembly is prohibited Copyright in the UK Recording and playback of material may require consent See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972 Compliance Ce This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage and 2004 108 EC EMC Mains fuse UK only This product is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Note e To conform to the EMC directive 2004 108 EC the mains plug on this product must not be detached from the mains cord Open Source Software Your produc
30. ited States and or other countries HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC ee USB The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT EN 3 2 Important Read and understand all instructions before you use your home theatre If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the product and accessories to rain or water Never place liquid containers such as vases near the product If liquids are spilt on or into the product disconnect it from the power socket immediately Contact Philips Consumer Care to have the product checked before use e Never place the product and accessories near naked flames or other heat sources including direct sunlight e Never insert objects into the ventilation slots or other openings on the product e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Disconnect the product from the power socket before lightning storms e When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire e Before y
31. odule Sold separately O Connect to the TV Connect your home theatre directly to a TV through one of the following connectors from highest to basic quality video 1 HDMI O Component video G Composite video Option 1 Connect to the TV through HDMI e Ifthe HDTV has a DVI connector connect using an HDMI DVI adapter e Ifthe TV supports EasyLink HDMI CEC control the home theatre and TV with one remote control see Use Philips EasyLink on page 17 HDMI OUT Option 2 Connect to the TV through YPbPr component video Note e The component video cable or connector might be labelled Y Cb Cr or YUV Cable not supplied Component Video Out Component Video In Pr Pb Y Option 3 Connect to the TV through composite video CVBS Note e The composite video cable or connector might be labelled AV IN VIDEO IN COMPOSITE or BASEBAND Cable not supplied VIDEO OUT Connect audio from TV or other devices Use your home theatre to play audio from the TV or other devices such as a cable box Tip e Press AUDIO SOURCE repeatedly to select the audio output of your connection Option 1 Connect audio through analogue audio cables Cable not supplied Option 2 Connect audio through coaxial cable Note e The digital coaxial
32. ou connect the product to the power socket ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power socket If the voltage is different Risk of injury or damage to the home theatre e For wall mountable products use only the supplied wall mount bracket Secure the wall mount to a wall that can support the combined weight of the product and the wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage e For speakers with stands use only the supplied stands Secure the stands to the speakers tightly Place the assembled stands on flat level surfaces that can support the combined weight of the speaker and stand e Never place the product or any objects on power cords or on other electrical equipment f the product is transported in temperatures below 5 C unpack the product and wait until its temperature matches room temperature before connecting it to the power socket e Visible and invisible laser radiation when open Avoid exposure to the beam e Do not touch the disc optical lens inside the disc compartment Risk of overheating e Never install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the produ
33. stations 1 Check that the FM antenna is connected 2 Press RADIO Ly AUTO INSTALL PRESS PLAY appears on the display panel if you have not installed any radio stations Press Play 3 Press the following buttons to control play Button Action 4 gt Selects a preset radio station Navigation Searches for a radio station buttons left right AV Fine tunes a radio frequency a Press and hold to erase the preset radio station Press to stop the installation of radio stations B Options Manual Press once to access programme mode and press again to store the radio station Automatic Press and hold for five seconds to reinstall radio stations RADIO Toggles between stereo and mono sound e AM and digital radio are not supported e If no stereo signal is detected or if fewer than five stations are found you are prompted to install the radio stations again e For the best reception place the antenna away from the TV or other sources of radiation EN 15 Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device Play from an MP3 player Connect and play audio files from an MP3 player or other external audio devices 1 Connect the MP3 player to the home theatre 2 Press AUDIO SOURCE repeatedly until MP3 LINK appears on the display panel 3 Press the buttons on the MP3 player to select and pl
34. t contains open source software Philips hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange This offer is valid for a period of 3 years after the date of purchase of this product To obtain the source code write to Program Manager Home Audio BU AVM Innovation Site Singapore Philips Electronics Singapore Pte Ltd 620A Lorong 1 Toa Payoh Singapore 319762 Trademarks A BDI IVE BONUSVIEW BD LIVE and BONUSVIEW are trademarks of the Blu ray Disc Association lt Java POWERED Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems Inc in the United States and or other countries AVCHD AVCHD and the AVCHD logo are trademarks of Matsushita Electric Industrial Co Ltd and Sony Corporation x v Colour xv Colour is a trademark of Sony Corporation dina CERTIFIED DLNA the DLNA logo and DLNA 1 0 Certified are trademarks service marks or certification marks of the Digital Living Network Alliance For HTS5580 and HTS5590 only S dits np Master Audio Essential Manufactured under licence under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535
35. urself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 3 Your home theatre Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your home theatre at www philips com welcome English Main unit E PHILIPS Q Disc compartment 4 Open Close Opens or closes the disc compartment gt IH Play Pause Starts pauses or resumes play E Stop e Stops play e G0 In radio mode erases the current preset radio station 5 Standby On Switches the home theatre on or to standby SOURCE Selects an audio video source for the home theatre T K gt I Skips to the previous or next track chapter or file In radio mode selects a preset radio station Display panel OG Volume control wheel EN 5 Remote control emesemmeen onmnuuunnmy Sreenanane ale senmeanmue see seEeest ee PHILIPS HOME THEATER SYSTEM 1 Standby On Switches the home theatre on or to standby e When EasyLink is enabled press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby O f Home Accesses the home menu 6 EN G Disc menu Accesses or
36. y firewalls or other security systems EJ Caution e Familiarise yourself with the network router media server software and networking principles before attempting to connect the home theatre to a computer network If necessary read documentation accompanying network components Philips is not responsible for lost damaged or corrupt data 10 EN Cable not supplied 5 Use your home theatre This section helps you use the home theatre to play media from a wide range of sources Before you start Make sure that you e Make the necessary connections and complete the setup as described in the Quick Start e Switch the TV to the correct source for the home theatre Access the home menu The home menu gives you easy access to connected devices audio and video settings and other features Press f amp Home Ly The home menu appears 2 Press the Navigation buttons and OK to select the following e play disc Starts disc play e Browse USB Accesses the content browser of the connected USB storage device e Browse iPod Accesses the content browser of the connected iPod or iPhone e Browse PC Accesses the content browser of the connected PC network e Setup Accesses menus to change picture sound and other settings Choose your sound This section helps you choose the ideal sound for your video or music
37. you need to change the setting ensure that the TV supports the new setting e For settings related to HDMI the TV must be connected through HDMI e For settings related to progressive or component video the TV must be connected through Component Video Change audio settings Press Home Select Setup then press OK Select Audio Setup then press OK Select and adjust the following settings e Night Mode Selects quiet or full dynamic sound Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech e HDMI Audio Selects HDMI audio format or disables HDMI audio output for the TV e Speaker Setup Sets the volume level and distance of each speaker to obtain the best possible surround sound based on your room setup ARWN 5 Press OK to confirm your choice Note e For settings related to HDMI the TV must be connected through HDMI e Night mode is available for Dolby encoded DVD and Blu ray discs for models that support Blu ray playback Set up network Press f Home Select Setup then press OK Select Network Setup then press OK ARUN Select and adjust the following settings e Network Installation Starts wired Ethernet or wireless setup Follow the instructions to set up the network connection e View Network Settings Displays the current network settings 5 Press OK to
Download Pdf Manuals
Related Search