OmniMount HTS1
Contents
1. SPEAKERS FOR EASY ASSEMBLY2. Assembly Instructions for HTS1 Speaker Stand Parts List JA 2 base a 6 Steel isolation Inner spikes and adjustment Insert post d nut c sleeve e s 2 M5 Threaded plug adapter f Outer post b 2 L bracket mounting plates h Je Ay 2 2 x2 Speaker 2 Complete ay mounting plate g adjustable posts 2 Adhesive mounting foam k 2 Mounting Screws i amp Speaker to bracket Yy d mounting screws 1 4 20 5mm STEP 1 Place speaker stand base a upside down on ground and thread steel isolation spikes in the 3 holes Turn the base over isolation spikes can scratch floors use caution and thread the outer post b into the hole in the base See Fig 1 Fig 2 For use with JBL SCS amp Harmon kardon For back of speaker mounting J For bottom of speaker Ay mounting Inner post d insert sleeve e Outer post b Fig 3 7 gt Set screw T X k Y ao h G l Inner post d Fig 4 STEP 2 Select Appropriate speaker adapter Fig 2 for your particular speaker application If your speaker comes with a threaded insert in the back or bottom use bracket h or f If your speaker does not come with a threaded insert you will need to use the adhesive foam k and mounting plate g STEP 3 Attach the adapter to the inner post d by using the 5mm mounting screw j see Fig 4 If
3. you are using the mounting plate g you must first remove the backing paper so the adhesive is exposed Then place the adhesive pad on the mounting plate Peel back the other side of the backing paper on the mounting foam Then place the speaker on the center of the mounting plate If you are using brackets h or f then attach the speaker to the selected bracket using the provided hardware Set to desired height by tightening the set screw in the outer post b See Fig 3 STEP 4 Route speaker wires through the hole in the back top of inner post d and out the bottom of the base Some ner Tainmene For assistance or more information on other great products from OmniMount Systems Inc contact us at OmniMount Systems Inc The Pointe at South Mountain 8201 S 48th St Phoenix AZ 85044 5302 1 800 MOUNT IT voice 480 829 8000 fax 480 756 9000 web www omnimount com 2003 OmniMount Systems Inc All rights reserved OmniMount is a registered trademark of OmniMount Systems Ine HTS1 SPEAKER STAND ADAPTABILITY COMES WITH THREE INTERCHANGEABLE ADAPTERS CABLE MANAGEMENT HIDE UNSIGHTLY WIRING QUALITY BUILT WITH POWDER COATED STEEL FLEXIBILITY SEAMLESS APPEARANCE AND HEIGHT ADJUSTMENT STABILITY THREE TOUCH POINTS FOR THE ULTIMATE IN STABILITY B B E CABLE MANAGEMENT 30 40 HEIGHT ADJUSTABLE MULTIPLE ADAPTORS TO FIT ALL PARTS INCLUDED THROUGH POST FOR IDEAL LISTENING LEVEL A VARIETY OF
Download Pdf Manuals
Related Search