Fellowes Neptune A3
Contents
1. DO laminate sharp or metal objects eg staples paper clips DO NOT laminate heat sensitive documents eg tickets ultrasounds etc DO NOT laminate with self adhesive pouches which require a cold setting DO NOT laminate an empty pouch LAMINATOR CONTROLS On off switch Pouch document entry slot B Standby button amp LED Y Entry support shelf du selection buttons Pouch document exit 80 100 125 175 microns Cooling system vents D Reverse button amp LED handles FEATURES TIPS SYSTEM CHECK System Check function When switched on the machine performs a System Check function The control panel lights quickly flash in sequence to check their operation Safe Start function When switched on the machine has a default Safe Start function which starts to warm up at the 80 micron setting You may select other temperature settings as required Reverse function To eject the laminating pouch during use press and hold down the reverse button until the pouch has ejected from the machine REVERSE Power Save function If the machine is not active for 60 minutes the Power Save function will place the machine into standby mode To operate the machine press the standby button POWER SAVE SETTING UP THE LAMINATOR l e Ensure the machine is on a stable surface 2 Check there is enough clear space min 502. IMPORTANT SAFETY INSTRUCTIONS Photo capable Yes Carrier free Yes Carry handles Yes Technical Data Voltage Frequency Current Amps 220 240V AC 50 60Hz 2 5A Wattage 530 Watts Dimensions HxWxD 120 x 555 x 245mm Net weight 6 5 kg Laminating capacity max document thickness 1mm Min pouch 75 micron total thickness 2 75 150 micron Max pouch 175 micron total thickness 2 x 175 350 micron CAUTIONS Please read before use and keep for future reference When laminating plug the machine into an easily accessible socket to prevent electrical shock do not use the appliance close to water do not spill water on to the appliance power cord or wall socket DO ensure the machine is on a stable surface DO test laminate scrap sheets and set the machine before final laminations DO remove staples and other metal articles prior to laminating DO keep the machine away from heat and water sources DO turn off the machine after each use DO unplug the machine when not in use for an extended period DO use pouches designed for use at the appropriate settings DO keep away from pets while in use DO NOT leave the power cord in contact with hot surfaces DO NOT leave power cord hanging from cupboards or shelves DO NOT use appliance if the power cord is damaged DO NOT attempt to open or otherwise repair the machine DO NOT exceed the machines quoted performance DO NOT allow minors to use this machine
3. O Diese Anleitungen vor Gebrauch genau durchlesen O Primo dell uso si raccomanda di leggere questo manuale di istruzioni CNL Gaarne deze instructies eerst te lezen voordat u de machine in gebruik neemt Cs L s dessa anvisningar innan du anv nder apparaten L s venligst denne vejledning f r anvendelse FIN n m ohjeet ennen k ytt CN Vennligst les n ye igjennom denne bruksanvisningen for bruk Przed u yciem prosz zapozna si z t instrukcj Aiap ore TIC TAPAKATW OONY EC TIPIV ATI rr XP ON Kullanmadan once lutfen bu talimatlari okuyen Pred pouzitim si proct te tyto pokyny Pred pouzitim si precitajte tieto pokyny Kerj k hogy haszn lat el tt olvassa el az utasit sokat Leia estas instru es antes da utiliza o fellowes com LAMINATOR CONTROLS QUICK START GUIDE ENGLISH CAPABILITIES Performance Format A3 Entry width 325mm Pouch thickness min 75 microns per side Pouch thickness max 175 microns per side Estimated heat up time 4 minutes Cool down time 30 60 minutes Lamination speed approx 50cm min fixed speed Number of rollers 4 Ready indication Light amp beep Reverse function Yes Clear Path Anti jam engine Yes LED interface Yes Power Save Auto shut off Yes 60 mins
4. ch immediately Place different thickness pouches choose between 100 125 or pouch on to a flat surface to cool 175 pouch thickness as required The selected button will flash red during warm up or cool down periods 12 1 eject a pouch press and hold down the reverse button until the pouch is ejected from the front of the 8 When the selected temperature is reached the flashing machine The Standby button will flash and the alert light will change from flashing red to solid green colour will sound and a signal will sound 9 Place the document into the open pouch Ensure the document is centred against the sealed edge Use the appropriate pouch size for the document NEED HELP 2 ON Let our experts help you with a solution Customer Service www fellowes com Always call Fellowes before contacting your place of purchase see the rear cover for contact details WORLDWIDE WARRANTY Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer If any part is found to be defective during warranty period your sale and exclusive remedy will be repair or replacement at Fellowes option and expense of the defective part This warranty does not apply in cases of abuse mishandling or unauthorised repair Any implied warranty including that of merchantability or fitness for particular purpose is hereby limited in duration to the appropriat
5. cm behind the machine to allow items to pass through freely Always put the item to be laminated into the ap propriate sized pouch This machine does not need a carrier to laminate It is a carrier free mechanism Always test laminate with a similar size and thick ness before final process If required trim excess material from around the item after lamination and cooling For best results use Fellowes brand pouches Enhance 80 Impress 100 Capture 125 Protect 175 When working with different pouch thickness tem perature settings it is recommended to start first with the thinnest pouches Prepare pouch and item for lamination Place item within pouch centred and touching the leading sealed edge Ensure the pouch is not too large for the item Select the correct power lead for the appropriate power supply Plug the machine into an easily accessible mains socket Insert the power lead in to the power socket located at the rear of the machine HOW TO LAMINATE 5 Switch the power on located next to the power socket 10 Ensure the pouch enters the machine sealed edge first the red power LED will light up Keep the pouch straight and central within the slot not on an angle Use the entry markings as a guide 6 the machine On using the standby button 11 Upon exit the laminated pouch is hot and soft 7 The default setting is 80 mic thickness if laminating prevent jamming remove the pou
6. del Neptune A3 conforms with the requirements of RoHS the Restriction of Hazardous Substances Directive 89 336 EEC The Low Voltage Directive 72 73 EEC as amended by directive 92 68 EEC The Electromagnetic Compatability Directive 89 336 EEC as amended by directive 92 31 EEC amp 96 68 EEC and the following Harmonised European Normes EN standards and IEC standards Information Technology Product EN 60950 1 2001 IEC 60950 1 2001 EMC EN 55014 1 A2 2002 EN 55014 2 A1 2001 EN 61000 3 2 2000 EN 61000 3 3 Al 2001 ie Itasca Illinois USA at und Fellowes December 2008 James Fellowes Help Line Europe 00 800 1810 1810 Fellowes Australia 6 1 3 8336 9700 Japan 8 1 0 3 5496 2401 Benelux 31 0 76 523 2090 Korea 82 0 2 3462 2844 Canada 1 905 475 6320 Malaysia 60 0 35122 1231 Deutschland 49 0 5131 49770 Polska 48 22 771 47 40 Espa a Portugal 34 902 33 55 69 Singapore 65 6221 3811 France _ 33 0 1 30 06 86 80 United Kingdom 44 0 1302 836836 talia 39 7 1 730041 United States 1 630 893 1600 1789 Norwood Avenue Itasca Illinois 60143 1095 e USA e 630 893 1600 fellowes com Australia Canada Deutschland France Japan Polska United Kingdom Benelux China Espa a Italia Korea Singapore United States 2008 Fellowes Inc Part No 403842
7. e warranty period set forth above In no event shall Fellowes be liable for any consequential damages attributable to this product This warranty gives you specific legal rights You may have other legal rights that vary from this warranty The duration terms and conditions of this warranty are valid worldwide except where different limitations restrictions or conditions may be required by local law For more details or to obtain services under this warranty please contact Fellowes or your dealer PRODUCT REGISTRATION Thank you for purchasing a Fellowes product Please visit www fellowes com register to register your product and benefit from product news feedback and offers Product details can be found listed on the rating plate positioned on the rear side or underside of the machine TROUBLESHOOTING Problem Possible cause Solution Switch on machine at rear next to plug No red power on LED Machine is not switched on inlet and at the wall socket Ready light does not come on after a Move the machine to a cooler and Machine is in a hot or humid area long period dry area Item may be too thick to laminate Pass through the machine again Pouch does not completely seal the item Check pouch thickness is correctly Temperature setting may be incorrect selected and pass through again Check pouch thickness is correctly Pouch has waves or bubbles Temperature setting may be incorrect Pouch is lost in the machine Pouch is
8. jammed Pouch was used open first Select reverse button and pull out the Pouch was not centred on entry Jamming item by hand Pouch was not straight upon entry Empty pouch was used Pass cleaning sheets through the selected and pass through again Pouch is damaged after lamination Damaged rollers or adhesive on rollers machine to test and clean rollers STORAGE amp CLEANING Switch off the machine at the wall Allow the machine to cool The outside of the machine can be cleaned with a damp cloth Do not use solvents or flammable materials to polish the machine Cleaning sheets can be used with the machine When the machine is warm run the sheets through the machine to clean any residue off the rollers For optimum performance it is recommended that cleaning sheets are used with the machine regularly W E E E This product is classified as Electrical and Electronic Equipment Should the time come for you to dispose of this product please ensure that you do so in accordance with the European Waste of Electrical and Electronic Equipment WEEE Directive and in compliance with local laws relating to this directive For more information on the WEEE Directive please visit www fellowesinternational com WEEE Declaration of Conformity Useful Phone Numbers Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way West Moor Park Doncaster South Yorkshire DN3 3FB England declares that the mo
Download Pdf Manuals
Related Search